Hey guys,
My Remdi 1S was bricked during flashing a wrong Rom,
Now screen not turning on,recovery is not opening,also fastboot is not opening.
Mi Flash detects device at COM 10 but i cannot enter into fastboot so its showing error.
Whenever i plug data cable into device,led notification light glows once(for 0.1sec) and then goes off.
In charging mode led notification light also does not glows.
Any tool for snapdragon like SP FLASH tool which works on MTK devices which was capable to unbrick Hard Bricked devices too.
did you try this
http://en.miui.com/thread-54139-1-1.html
Hi guys,
I request your urgent help. Yesterday I tried to install a Marshmallow custom ROM (pac_A6020_MM.Alpha.1.Official_20160704-204606) in my Lenovo VIBE K5 Plus A6020a46. Now it seems bricked. I can boot into fastboot mode but not into the recovery mode. When I turn on, it it is just stuck on Lenovo Logo screen. I cannot flash with QFIL as the port is not detected on my Windows 10 Laptop. What should I do? Please help.
Download stock ROM and twrp recovery and flash twrp recovery in fastboot mode. Then flash stock ROM using twrp recovery. That's it.
cityengineers said:
Download stock ROM and twrp recovery and flash twrp recovery in fastboot mode. Then flash stock ROM using twrp recovery. That's it.
Click to expand...
Click to collapse
Thank you for your reply. But now device is not shown in adb command line "adb device". So I cant continue. Neither QFIL recognize the device port.
Please check the screenshot : http_//imgur_com/nMu7sfe
I've faced the same problem that you have said mobile didn't detect by the PC, that's USB driver problem, make sure you installed USB drivers for your device, if not then install USB drivers for your device, then only PC can detect your device. Then flash the twrp and flash the stock ROM via twrp.
try using QLIP and press the volume + button
http://www.mediafire.com/download/1...1.2_BMAIN_16G_ROW_otafull+By+GSMDevelopers.7z
http://www.mediafire.com/download/u4b8uzz4dy454a2/A6020a46+SDcard+upgrade+SOP.doc
here is a link for firmware and instructions
Password - gsmdevelopers.com
Thank you all dear friends for your timely help. But in my case none of the methods above worked completely. I couldn't flash my Vibe K5 Plus with QFIL because it never detected the port. When I tried restarting the phone holding Volume + key, port just showed up and when I clicked on download button in QFIL, the phone restarted, the port disappeared and nothing happened. So, that method also failed.
Now I just showed the problem at Lenovo Service center. They made it, but installed a very old version (A6020a46_S024) of OS from which I could not update to the latest one (A6020a46_S048_160701_ROW). It showed some ota error after downloading almost 156MB. Luckily I could find the latest ROM (A6020a46_S048_160701_ROW) from the Russian Lenovo Forum. It helped me to update my Lenovo Vibebe K5 Plus_A6020a46 to the latest version. Once again thank you all. :good:
Jintu Jose said:
Thank you all dear friends for your timely help. But in my case none of the methods above worked completely. I couldn't flash my Vibe K5 Plus with QFIL because it never detected the port. When I tried restarting the phone holding Volume + key, port just showed up and when I clicked on download button in QFIL, the phone restarted, the port disappeared and nothing happened. So, that method also failed.
Now I just showed the problem at Lenovo Service center. They made it, but installed a very old version (A6020a46_S024) of OS from which I could not update to the latest one (A6020a46_S048_160701_ROW). It showed some ota error after downloading almost 156MB. Luckily I could find the latest ROM (A6020a46_S048_160701_ROW) from the Russian Lenovo Forum. It helped me to update my Lenovo Vibebe K5 Plus_A6020a46 to the latest version. Once again thank you all. :good:
Click to expand...
Click to collapse
Please write the method how to updated it if you used QFIL. I think a lot of users can get help from your experience!
For drivers, install QDLoader HS-USB Driver drivers (google them)
and if you still can not detect any HS USB port in device manager but see an ADB Interface port. upgrade drivers of ADB port with QDLoader HS-USB Driver you downloaded earlier
This will detect your phone,
Good Luck!
QFIL was not useful for me. When I started the phone holding Volume+ button it detected the port and when clicked on the download button in QFIL the phone restarted after 3-5 seconds with blank screen, after a few seconds showed an error message "Download Fail, Port not Available". Then I had remove the battery to start my phone in the mormal mode. As I have said above, I had to approach Lenovo Service center to recover my Lenovo VIBE K5 Plus_A6020a46. They recovered it and installed the oldest OS version for it. It had many problems with that version, such as draining battery very soon and heating issues etc. I could not update it with Lenovo companion app. It downloaded the 156MB update, but during installation it showed a weird OTA error. I tried it for 5 times, but the result was always the same.
So I searched for the latest update ROM in the internet (A6020a46_S048_16070 1_ROW) I got it from an Russian Lenovo Community website. I extrated the zip file (A6020a46_S048_16070 1_ROW_QPST.zip). There were many ota update files and a "system" update file. I copied that "system.zip" file to the phones SD card and updated from there using recovery mode. It was successful.
If someone is in need of the Latest ROM (1.34 GB) for the Lenovo VIBE K5 Plus_A6020A46 go to:- http_//phonedl.ota.lenovomm.com/dls/v6/A6020a46_S048_160701_ROW_WC39DE8CCE.zip
add " : " instead of underscore " _ " after http in the link
or just copy and paste in the URL bar :- phonedl.ota.lenovomm.com/dls/v6/A6020a46_S048_160701_ROW_WC39DE8CCE.zip
Use the ota update referring to your country .
Lenovo K5 Plus Firmware (Latest)
Here is the latest stock ROM for Lenovo Vibe K5 Plus A6020a46
Release Date : 17/08/2016
Lenovo K5 Plus - Firmware A6020a46_S054_160817_16G_ROW_QPST
Download (1.17 GB)
:good:
Jintu Jose said:
QFIL was not useful for me. When I started the phone holding Volume+ button it detected the port and when clicked on the download button in QFIL the phone restarted after 3-5 seconds with blank screen, after a few seconds showed an error message "Download Fail, Port not Available". Then I had remove the battery to start my phone in the mormal mode. As I have said above, I had to approach Lenovo Service center to recover my Lenovo VIBE K5 Plus_A6020a46. They recovered it and installed the oldest OS version for it. It had many problems with that version, such as draining battery very soon and heating issues etc. I could not update it with Lenovo companion app. It downloaded the 156MB update, but during installation it showed a weird OTA error. I tried it for 5 times, but the result was always the same.
So I searched for the latest update ROM in the internet (A6020a46_S048_16070 1_ROW) I got it from an Russian Lenovo Community website. I extrated the zip file (A6020a46_S048_16070 1_ROW_QPST.zip). There were many ota update files and a "system" update file. I copied that "system.zip" file to the phones SD card and updated from there using recovery mode. It was successful.
If someone is in need of the Latest ROM (1.34 GB) for the Lenovo VIBE K5 Plus_A6020A46 go to:- http_//phonedl.ota.lenovomm.com/dls/v6/A6020a46_S048_160701_ROW_WC39DE8CCE.zip
add " : " instead of underscore " _ " after http in the link
or just copy and paste in the URL bar :- phonedl.ota.lenovomm.com/dls/v6/A6020a46_S048_160701_ROW_WC39DE8CCE.zip
Use the ota update referring to your country .
Click to expand...
Click to collapse
You're suposed to hold volume + AND volume - at the same time (just as the power button) for 5 seconds, then your phone is going to be with led and black screen.
rafaellancas said:
You're suposed to hold volume + AND volume - at the same time (just as the power button) for 5 seconds, then your phone is going to be with led and black screen.
Click to expand...
Click to collapse
:good: thank you for your help. Could you please explain it little more step by step . When should I hold both Vol + and Vol - keys together. :angel:
rafaellancas said:
You're suposed to hold volume + AND volume - at the same time (just as the power button) for 5 seconds, then your phone is going to be with led and black screen.
Click to expand...
Click to collapse
thank you for your help. Could you please explain it little more step by step . When should I hold both Vol + and Vol - keys together.
Jintu Jose said:
thank you for your help. Could you please explain it little more step by step . When should I hold both Vol + and Vol - keys together.
Click to expand...
Click to collapse
With the phone turned off and disconected from your computer, you press and hold the following buttons: volume + and - and power, for five seconds, then your phone should be black and with a red led. Now you connect to your computer and check if QFIL recognizes the port (this is the hardest part, to install and make QFIL work on windows), then it's just like the guide
rafaellancas said:
With the phone turned off and disconected from your computer, you press and hold the following buttons: volume + and - and power, for five seconds, then your phone should be black and with a red led. Now you connect to your computer and check if QFIL recognizes the port (this is the hardest part, to install and make QFIL work on windows), then it's just like the guide
Click to expand...
Click to collapse
Wow ! That worked .... thanks .... thanks a lot ... this was the key point I missed... you saved my day and phone
Jintu Jose said:
Wow ! That worked .... thanks .... thanks a lot ... this was the key point I missed... you saved my day and phone
Click to expand...
Click to collapse
I'm glad to help man
Is there any possibility to recover a dead phone? It is the same model (Lenovo Vibe K5 Plus A6020a46). It shows only red led when connected to a power source. Can't turn the power on, none of the key combinations works, no boot screen, no images nothing. It is totally dead except for the red LED.
Jintu Jose said:
Is there any possibility to recover a dead phone? It is the same model (Lenovo Vibe K5 Plus A6020a46). It shows only red led when connected to a power source. Can't turn the power on, none of the key combinations works, no boot screen, no images nothing. It is totally dead except for the red LED.
Click to expand...
Click to collapse
I don't know man, but I would try to download the QFIL image for the a6020l46 and give it a try, but, before you try it, let it charge for about 3 hours, then take off the battery and pot it on again and try to enter the mode for QFIL (volume + and - and power button pressed and hold for 5 seconds).
Same problem here
I have a bricked lenovo vibe k 5 (A6020I37) in qfil says sahara fail, and the pc recognizes my phone as Qualcomm HS-USB QDLoader 9008. From here I dont know what to do, I already tried with lenovo smart assistance but stops at 3%.
I hope you can help me to, and thank you all for your the help u can bring me.
Pleaseee anyone can help meeeee?????
Hello everyone, I had a big problem with my letv x800 US version when I installed a CN Rom but I managed to solve the problem with QFIL after I installed TWRP and the Couco92 Rom ( The1PRO_US_X800-ROW-v48RL-CUOCO92-5.5.011S) but at the end of the installation my letv x800 restarts on the Rom but before it shows me (Letv with two lines in Chinese) with a led light in blue and it is the same when I restart my phone.
And when I turn off my letv x800 to turn it on again I can not turn it back on with a normal press on the power button but you have to press for about 10 seconds so that it always comes on with the same problem.
Final problem: to turn on my letv x800 it is necessary to press the button power laying more than 10 seconds and with a normal press of 5 seconds it does not light, and when it lights with a long press of more than 10 seconds he shows me (Letv with two lines in Chinese) after he goes to the Rom but always with a led light in blue.
Please help me solve this problem.