Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hi,
Here is PAC MM 6 for the Lenovo Vibe K5 and K5 Plus
It's in a very alpha/experimetal state for now !
It's now in a quite Stable state for now ! Enjoy it
For now the build has been tested and developped on the A6020a40 variant.
It has been tested and validated on other variants by the community:
A6020a40
A6020l36
A6020l37
A6020a46 (2GB RAM)
A6020a46 (3GB RAM)
K32C36 (Lemon 3)
Requirements:
My TWRP 3.0.2.0 build: Recovery TWRP 3.0.2.0 for Lenovo Vibe K5
How to install:
From stock
Copy the ROM zip on your phone
Reboot in TWRP Recovery mode
Backup your phone!
Format/Wipe system, cache, dalvik, data
Flash/Install ROM
Flash Install Gapps (OpenGapps ARM MM Mini or smaller is recommanded) [ since 2016-08-01 build, Gapps ARM64 is compatible ]
Reboot
Upgrade from previous build
Copy the ROM zip on your phone
Reboot in TWRP Recovery mode
Format/Wipe only cache, dalvik
Flash/Install ROM (don't flash gapps! or it will not boot)
Reboot
Builds Downloads:
http://moto.shreps.fr
XDA:DevDB Information
[ROM][OFFICIAL][6.0.1][A6020] PAC-ROM 6 MM - Lenovo Vibe K5, K5 Plus, ROM for all devices (see above for details)
Contributors
Shreps, scritch007
Source Code: https://github.com/boulzordev/android_device_lenovo_A6020
ROM OS Version: 6.0.x Marshmallow
ROM Firmware Required: TWRP 3 Recovery
Based On: PAC-Man ROM
Version Information
Status: Stable
Created 2016-06-30
Last Updated 2016-11-15
Status
Working:
Screen/Graphics/Touch
RIL
Data/LTE
LED
HapticFeedback
Vibration
WiFi
Camera
MTP
Bluetooth
WiFi hotspot
Builtin ROOT (to enable in Developer Options)
Accelerometer
GPS
Audio
Media decoding
Charger/Power managment
CPU Core handling
Sensors
Encryption
Handle all variant and set custom properties (LCD Density is the priority)
Single SIM detection
Video Recording
Brightness steps
Almost working/buggy:
LED Colors
Hardware H264 acceleration (affect also streaming video playback)
Not working/Issues:
Kernel doesn't handle Download Mode key combo boot, but Download mode is available with
Code:
adb reboot edl
Reserved
@ Non European users, please test the ROM on your variant (A6020a46, A6020l36, l37)
and report back to us with a maximum of informations:
- logcat, dmsg, pstore logs
- which build you tried
- how to reproduce bugs
It have built-in root?
@romulocarlos Can you test it on your K5 plus? I'm currently having super slow internet.
---------- Post added at 11:25 AM ---------- Previous post was at 11:22 AM ----------
Shreps said:
Hi,
Here is PAC MM 6 for the Lenovo Vibe K5
It's in a very alpha/experimetal state for now !
For now the build has been tested only on the A6020a40 variant.
Requirements:
My TWRP 3.0.20 build: Recovery TWRP 3.0.2.0 for Lenovo Vibe K5
How to install:
From stock
Copy the ROM zip on your phone
Reboot in TWRP Recovery mode
Backup your phone!
Format/Wipe system, cache, dalvik, data
Flash/Install ROM
Flash Install Gapps
Reboot
Upgrade from previous build
Copy the ROM zip on your phone
Reboot in TWRP Recovery mode
Format/Wipe only cache, dalvik
Flash/Install ROM (don't flash gapps! or it will not boot)
Reboot
Unoffical Experimental builds Downloads:
http://moto.shreps.fr
XDA:DevDB Information
[ROM][UNOFFICIAL][6.0.1][A6020] PAC-ROM 6 MM - Lenovo Vibe K5, ROM for all devices (see above for details)
Contributors
Shreps, scritch007
Source Code: https://github.com/boulzordev/android_device_lenovo_A6020
ROM OS Version: 6.0.x Marshmallow
ROM Firmware Required: TWRP 3 Recovery
Based On: PAC-Man ROM
Version Information
Status: Testing
Created 2016-06-30
Last Updated 2016-06-30
Click to expand...
Click to collapse
Any screenshots, sir?
---------- Post added at 11:25 AM ---------- Previous post was at 11:25 AM ----------
Shreps said:
Hi,
Here is PAC MM 6 for the Lenovo Vibe K5
It's in a very alpha/experimetal state for now !
For now the build has been tested only on the A6020a40 variant.
Requirements:
My TWRP 3.0.20 build: Recovery TWRP 3.0.2.0 for Lenovo Vibe K5
How to install:
From stock
Copy the ROM zip on your phone
Reboot in TWRP Recovery mode
Backup your phone!
Format/Wipe system, cache, dalvik, data
Flash/Install ROM
Flash Install Gapps
Reboot
Upgrade from previous build
Copy the ROM zip on your phone
Reboot in TWRP Recovery mode
Format/Wipe only cache, dalvik
Flash/Install ROM (don't flash gapps! or it will not boot)
Reboot
Unoffical Experimental builds Downloads:
http://moto.shreps.fr
XDA:DevDB Information
[ROM][UNOFFICIAL][6.0.1][A6020] PAC-ROM 6 MM - Lenovo Vibe K5, ROM for all devices (see above for details)
Contributors
Shreps, scritch007
Source Code: https://github.com/boulzordev/android_device_lenovo_A6020
ROM OS Version: 6.0.x Marshmallow
ROM Firmware Required: TWRP 3 Recovery
Based On: PAC-Man ROM
Version Information
Status: Testing
Created 2016-06-30
Last Updated 2016-06-30
Click to expand...
Click to collapse
Thanks for this, btw ?
@bittooshubham
I can't test it for now. I just received my phone from warranty, and testing the battery performance. And this ROM is for A40, my phone is L36. When I used A40 on my L36 I was receiving a lot of force close regarding framework and/or system.ui and/or settings, and others...
Have you checked your internet or 4g settings?
sullivan781 said:
It have built-in root?
Click to expand...
Click to collapse
Yes
bittooshubham said:
Any screenshots, sir?
Thanks for this, btw
Click to expand...
Click to collapse
On the screenshot tabs
romulocarlos said:
@bittooshubham
I can't test it for now. I just received my phone from warranty, and testing the battery performance. And this ROM is for A40, my phone is L36. When I used A40 on my L36 I was receiving a lot of force close regarding framework and/or system.ui and/or settings, and others...
Have you checked your internet or 4g settings?
Click to expand...
Click to collapse
We will try to make it "universal" on all A6020 variants with @scritch007
But we need you to test and report and post logs for this
Shreps said:
We will try to make it "universal" on all A6020 variants with @scritch007
But we need you to test and report and post logs for this
Click to expand...
Click to collapse
Any chance of losing IMEI after flashing? How can I backup IMEI?
bittooshubham said:
Any chance of losing IMEI after flashing? How can I backup IMEI?
Click to expand...
Click to collapse
I don't think so, because you will flash a ROM and not a Firmware. So only system and boot are modified.
Shreps said:
I don't think so, because you will flash a ROM and not a Firmware. So only system and boot are modified.
Click to expand...
Click to collapse
If I get bootloop or soft brick it. Can i restore back using backup of Stock ROM taken through your TWRP?
bittooshubham said:
If I get bootloop or soft brick it. Can i restore back using backup of Stock ROM taken through your TWRP?
Click to expand...
Click to collapse
Backup your stock ROM...
bittooshubham said:
If I get bootloop or soft brick it. Can i restore back using backup of Stock ROM taken through your TWRP?
Click to expand...
Click to collapse
The VERY FIRST THING you must do is a FULL BACKUP with TWRP. Whit this backup you can restore your phone if you get bootloop. And if you softbrick your phone, you can restore it with the ORIGINAL ROM of your phone with QFIL, and then restore your full backup you made first.
So, find original ROM of your phone and keep it in a safe place, make a backup and... let's go!
@ Shreps I think it's necessary to say that arm64 gapps is incompatible.
---------- Post added at 02:28 PM ---------- Previous post was at 01:45 PM ----------
[/COLOR @Shreps I just installed on l36 and works fine (in terms of what is working), but the corners of my screen are blinking red.
sullivan781 said:
@ Shreps I think it's necessary to say that arm64 gapps is incompatible.
---------- Post added at 02:28 PM ---------- Previous post was at 01:45 PM ----------
[/COLOR @Shreps I just installed on l36 and works fine (in terms of what is working), but the corners of my screen are blinking red.
Click to expand...
Click to collapse
Thx for your feedback!
About Red Border screen, it's normal, the ROM is built in debug mode until everything is fixed
Do you have RIL/phone/Data/LTE on your variant ?
It's working on K32C36(Chinese version of K5 Plus) only thing I notice now is Gello is FC
and the default DPI is...320? It seems that the system recognize this device as tablet?
jwchen119 said:
It's working on K32C36(Chinese version of K5 Plus) only thing I notice now is Gello is FC
and the default DPI is...320? It seems that the system recognize this device as tablet?
Click to expand...
Click to collapse
Nice
About Gello, you need make a user installation of the APK (use File Explorer, and install /system/app/Gello/Gello.apk) to make it works.
or install and use Chrome
About the DPI, 320 is the right density for the A6020a40 variant (I have) because of it's 1280x720 resolution.
Your variant might have a bigger resolution, you can try to change the Density in Settings/Display/LCD Density and use a bigger one.
Or set 480 in your build.prop
We will check if we can set the right density depending of the variant.
And what about RIL/Data/LTE? Working on your variant too ?
@Shreps I just found a bug! When I lock my screen, it turns black instead of turn off. And another thing: I can't access download mode anymore, so I can't restore the stock rom for now using QFIL, only by TWRP Backup.
EDIT:
Brightness control doen't work too.
jwchen119 said:
It's working on K32C36(Chinese version of K5 Plus) only thing I notice now is Gello is FC
and the default DPI is...320? It seems that the system recognize this device as tablet?
Click to expand...
Click to collapse
This is the kind of things we'll need to know in order to try to make it work best on all devices.
We can introduce a specific init.c that will set variables depending on the device.
In order to do so, send us the result of a adb shell getprop once the rom is fully booted. We'll try to find some specific information to use.
---------- Post added at 04:08 PM ---------- Previous post was at 04:05 PM ----------
sullivan781 said:
@Shreps I just found a bug! When I lock my screen, it turns black instead of turn off. And another thing: I can't access download mode anymore, so I can't restore the stock rom for now using QFIL, only by TWRP Backup.
Click to expand...
Click to collapse
Should be fixed in the latest version. https://github.com/boulzordev/andro...mmit/258f330987c412c3076dc99c3075ff0e3ce8daef
I don't know about that download mode.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
TeamWin's TWRP Touch Recovery For Lenovo A7000-a
SCREENSHOT ON ATTACHMENT
TWRP is an open source, community project. TWRP development is done by roughly 4 people at this point. TWRP also have a large support community with many people who are willing to answer questions and help people with their devices either through our IRC channel or on forums like xda-developers.
This TWRP was originally formed to work on Lenovo K3 Note. After Denis work on K3 Note, I wanted to make it that would work on Lenovo A7000-a to. Today TWRP is the leading custom recovery for Android phones.
A custom recovery is used for installing custom software on your device. This custom software can include smaller modifications like rooting your device or even replacing the firmware of the device with a completely custom “ROM” like OmniROM
You can find the source code for TWRP at https://github.com/omnirom/android_bootable_recovery/
Flashing Instructions :
To install recovery images use Flashify / Rashr / TWRP Manager from Play Store or flash in your current recovery:
1. Go to install, find and select the Images... button.
2. Browse to the image that you downloaded and select it.
3. Choose recovery and swipe to flash.
Download :
TWRP : Mod Edit: Link Removed
Remember to do backup of your current recovery before installing.
XDA:DevDB Information
TWRP 3.0.2-8, TWRP for the Lenovo A7000
Contributors
HDHR, sandeep.sethi, Denis_PDA
Version Information
Status: Stable
Created 2016-10-29
Last Updated 2017-02-19
Mod Edit: Thread Closed
Changelog
TWRP 3.0.2-8 :
~Upgraded to TWRP 3.0.2-8 (Base, Security Patch,ETC.)
~Minor fixes
~Added ability to set system.img
=>TWRP -> Install -> Install image -> system.img -> System Image -> Swipe to confirm Flash.
~Optimized OTG FS support FAT32, exFAT, NTFS
~Flashable installation supported
TWRP 3.0.2-6 :
~Updated to TWRP 3.0.2-6 (Security Patch,Base,ETC.)
~Fixed code name error
~Backup and Restore Improvement
~Lot of Improvement
TWRP 3.0.2-5 :
~Initial release
Detailed Changelogs Here :
https://github.com/omnirom/android_bootable_recovery/commits/android-6.0
Reserved
How is it possible ? Flashing a recovery from another recovery ? Doesn't the recovery partition get overwritten?
[Thanks though for the new version]
tanish2k09 said:
How is it possible ? Flashing a recovery from another recovery ? Doesn't the recovery partition get overwritten?
[Thanks though for the new version]
Click to expand...
Click to collapse
Its will overwrite the old one with the new one... You can update via TWRP to
1. Boot to TWRP
2. Select install files
3. Select install image
4. Then select recovery image
5. Select install on recovery
6. Finish and go to reboot option and select reboot to recovery
6. Tadaaa your new Recovery installed
Themes support?
tanish2k09 said:
Themes support?
Click to expand...
Click to collapse
Support :fingers-crossed:
Thanks!
Ceco85 said:
Thanks!
Click to expand...
Click to collapse
Your welcome
What about compatibility of old backup created in 3.0.2-1
CyberDeat said:
What about compatibility of old backup created in 3.0.2-1
Click to expand...
Click to collapse
It I'll not detect backup from old TWRP,you need to backup files on new TWRP and just move your old backup to new folder one
You ported it or built it from source?
tanish2k09 said:
You ported it or built it from source?
Click to expand...
Click to collapse
Build from source on k3 note ported to a7000 :3
How to install on a non-rooted MM A7000-a?
jocph said:
How to install on a non-rooted MM A7000-a?
Click to expand...
Click to collapse
Use SP Flash tools
Thanks for replying. Can you give the steps? Doesn't spflashtool need a scatterfile? Sorry but I'm not very familiar with spflashtool.
Thnx HDHR for the recovery :good:
---------- Post added at 03:37 PM ---------- Previous post was at 03:21 PM ----------
jocph said:
Thanks for replying. Can you give the steps? Doesn't spflashtool need a scatterfile? Sorry but I'm not very familiar with spflashtool.
Click to expand...
Click to collapse
In sp flash tool...for flashing Recovery
1-Install lenovo driver
2-open sp flash tool by administration
3-load scatter file,
4-select recovery only (also select recovery u have downloaded)
5-check in option that dal dal option is tick
6- click on download
7-switch off ur phone...take out battery for 5 sec..reinsert battery and connect ur phone with pc then
It will automatically flash the recovery after u see a download ok popup window disconnect ur phone and u have successfully flash TWRP recovery
Where can I find the scatterfile for this TWRP image? The download only gives the img file. My MM A7000-a is not rooted and does not have custom recovery yet.
i flashed a theme on my old twrp.....the theme got caried on to this one......
i am unable to remove it....plez help.....
there is no folder of twrp in my sd card....
jocph said:
Where can I find the scatterfile for this TWRP image? The download only gives the img file. My MM A7000-a is not rooted and does not have custom recovery yet.
Click to expand...
Click to collapse
https://drive.google.com/file/d/0B5os0Tgr4idrbTA1WkxhUHB6TzA/view
Scatter file...there is also a old TWRP dont use it....
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I am not responsible for anything that may happen to your phone as a result of installing custom roms and/or kernels. you do so at your own risk and take the responsibility upon yourself.
Part -A Configure Computer
1) Download and extract the Stock firmware, Setup tools & Drivers
2) Install ADB Drivers
3) Install Lenovo ZUK Z2 PLUS (2132) Drivers
4) Setup Tool all in one
5) Setup Mi Flash tool
Part -B Booting device in to EDL Mode
Note : Thank to @mauronofrio for his tool
1) Enable Android debugging (ADB) in developer options
2) Connect your device to PC
3) open Tool all in one
4) The tool detects your device and pop up a window on your z2 plus device
5) chick and click OK
6) Know go to Tool all in one > Advance Options
7) click Reboot EDL
8) Device will boot in to EDL Mode
Part -C Flashing stock Firmware
1) Open Mi Flash tool
2) Click on refresh to detect your Z2 plus as COM X ( Note : X represents device port numbers )
3) If you want to lock bootloader then select " clear all and lock " which was present on right bottom corner
4)Click on flash
Note : Never disconnect your device while MI tool was flashing
5) It take 300 sec to complete task after that hold power key for 15 sec to boot your device
Lenovo ZUK Z2 Plus ( 2132) Marshmallow
Indian firmware ( Note : all partitions fixed by me :good: )
Mi Flash tool ( Note : Recommended and Modified version by Me for deep partitions:fingers-crossed: )
Tool All In One ( Note : for Booting in to EDL, flashing TWRP , Unlock & lock bootloader )
adb-setup ( Note : Very important )
Other useful links ( If you want )
Drivers
PdaNet
Qualcomm_QHSUSB
ZUK_Z2132_drivers_V1.0.5
Tools
QPST
@ZUK ................................... for device
@zukfans.eu ..................... for source
@Francko76 .................... for source
@xiaomi .............................. for MI Flash tool
@mauronofrio ................. for Tool All In One
@Annabathina .................. for fixing deep partitions
@XDA ................... developers for helping me
@lenovo forum ........... developers
Lenovo ZUK Z2 Plus ................. Model 2132
XDA:DevDB Information
[Rom][6.0.1]Lenovo ZUK Z2 PLUS (2132) INDIAN firmware V2.0.093ST using MI Flash tool, ROM for the Lenovo ZUK Z2 (Plus)
Contributors
Annabathina
ROM OS Version: 6.0.x Marshmallow
Based On: Stock rom
Version Information
Status: Stable
Current Stable Version: 2.0.093
Stable Release Date: 2016-08-11
Created 2017-09-25
Last Updated 2017-09-25
Reserved
Reserved
redserved
Which is better
Which stock rom 7.0 or 6.0 ...is best for battery...
Vimi12 said:
Which stock rom 7.0 or 6.0 ...is best for battery...
Click to expand...
Click to collapse
6.0.. less bugs too
If i flash this rom will my warranty be restored? Currently i am on aicp
harshmehta29 said:
If i flash this rom will my warranty be restored? Currently i am on aicp
Click to expand...
Click to collapse
Yes your device will be like when you purchased.
Help me
Does my phone get ota updates after flashing the rom??????
have you tried ...?
have you flashed this rom. and are able to get ota ?
---------- Post added at 12:28 PM ---------- Previous post was at 12:25 PM ----------
adil786ali63 said:
6.0.. less bugs too[/you got ota 7.0 after falshing this rom ??
Click to expand...
Click to collapse
cant get ota update
hi, i flashed as mention above but now the problem is that i cant get ota update to zui 2.0.133 and android 7.0
phone is bootloader unlocked and rooted, is there any other steps i need to do before flashing back to the original firmware ? or just go ahead and follow instruction on the OP ?
omki511 said:
hi, i flashed as mention above but now the problem is that i cant get ota update to zui 2.0.133 and android 7.0
Click to expand...
Click to collapse
same problem here, I am going to flash using qfil and will update here.
Lenovo z2 plus flashing
Please don't use Mi flash tool, it was not properly flashing.Use qfil for proper flashing.
---------- Post added at 09:30 AM ---------- Previous post was at 09:27 AM ----------
arun356y said:
same problem here, I am going to flash using qfil and will update here.
Click to expand...
Click to collapse
Flash stock room again with qfil and after that you will definitely get ota updates.
[email protected] said:
Please don't use Mi flash tool, it was not properly flashing.Use qfil for proper flashing.
---------- Post added at 09:30 AM ---------- Previous post was at 09:27 AM ----------
Flash stock room again with qfil and after that you will definitely get ota updates.
Click to expand...
Click to collapse
yeah I flashed 2.5 104 ST and now its working fine
I flash rom using QFIL but it still shows me "system has been root" in System Update app
I flash rom with "unlock" the bootloader as well as "relock" bootloader... but i can't able to update.
It's not working....
meetgajjar31 said:
I flash rom using QFIL but it still shows me "system has been root" in System Update app
I flash rom with "unlock" the bootloader as well as "relock" bootloader... but i can't able to update.
It's not working....
Click to expand...
Click to collapse
Can you help me in flashing through qfil??
---------- Post added at 12:45 PM ---------- Previous post was at 12:44 PM ----------
How to flash through qfil ??
Will i be able to get system update after flashing this if the bootloader is locked?
anyone using the zui 2.0 marshmallow build? What's the SOT.. I'm currently on Chinese zui 3.1, hoping to get back to Indian zui 2.0 because of double notification but the battery life of Chinese zui 3.1 is good as i easily get 7hr 30 to 8hr even with moderate to heavy usage
SteelBodyX said:
anyone using the zui 2.0 marshmallow build? What's the SOT.. I'm currently on Chinese zui 3.1, hoping to get back to Indian zui 2.0 because of double notification but the battery life of Chinese zui 3.1 is good as i easily get 7hr 30 to 8hr even with moderate to heavy usage
Click to expand...
Click to collapse
How do you get that much of SOT i barely got 5.30 hrs max sot
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I am not responsible for anything that may happen to your phone as a result of installing custom roms and/or kernels. you do so at your own risk and take the responsibility upon yourself.
Part -A Configure Computer
1) Download and extract the Stock firmware, Setup tools & Drivers
2) Install ADB Drivers
3) Install Lenovo ZUK Z2 PLUS (2132) Drivers
4) Setup Tool all in one
5) Setup Mi Flash tool
Part -B Booting device in to EDL Mode
Note : Thank to @mauronofrio for his tool
1) Enable Android debugging (ADB) in developer options
2) Connect your device to PC
3) open Tool all in one
4) The tool detects your device and pop up a window on your z2 plus device
5) chick and click OK
6) Know go to Tool all in one > Advance Options
7) click Reboot EDL
8) Device will boot in to EDL Mode
Part -C Flashing stock Firmware
1) Open Mi Flash tool
2) Click on refresh to detect your Z2 plus as COM X ( Note : X represents device port numbers )
3) If you want to lock bootloader then select " clear all and lock " which was present on right bottom corner
4)Click on flash
Note : Never disconnect your device while MI tool was flashing
5) It take 300 sec to complete task after that hold power key for 15 sec to boot your device
Lenovo ZUK Z2 Plus ( 2132) Nougat
Indian firmware ( Note : all partitions fixed by me :good: )
Mi Flash tool ( Note : Recommended and Modified version by Me for deep partitions:fingers-crossed: )
Tool All In One ( Note : for Booting in to EDL, flashing TWRP , Unlock & lock bootloader )
adb-setup ( Note : Very important )
Other useful links ( If you want )
Drivers
PdaNet
Qualcomm_QHSUSB
ZUK_Z2132_drivers_V1.0.5
Tools
QPST
@ZUK ................................... for device
@zukfans.eu ..................... for source
@Francko76 .................... for source
@xiaomi .............................. for MI Flash tool
@mauronofrio ................. for Tool All In One
@Annabathina .................. for fixing deep partitions
@XDA ................... developers for helping me
@lenovo forum ........... developers
Lenovo ZUK Z2 Plus ................. Model 2132
XDA:DevDB Information
[Rom][7.0]Lenovo ZUK Z2 PLUS (2132) INDIAN firmware V2.5.104ST using MI Flash tool, ROM for the Lenovo ZUK Z2 (Plus)
Contributors
Annabathina
ROM OS Version: 7.x Nougat
Based On: Stock rom
Version Information
Status: Stable
Current Stable Version: 2.5.104ST
Stable Release Date: 2017-04-18
Created 2017-09-25
Last Updated 2017-09-25
Reserved
Reserved
RESERVED
Good to see you buddy.....loved your work in yu forums. Hope you will do same with thus device too.....looking forward
Sent from my Z2 Plus using Tapatalk
Anna in zuk z2 forum :silly::laugh:
Now this phone will rock
Dextron01 said:
Good to see you buddy.....loved your work in yu forums. Hope you will do same with thus device too.....looking forward
Click to expand...
Click to collapse
stop quoting op please...
Dextron01 said:
Good to see you buddy.....loved your work in yu forums. Hope you will do same with thus device too.....looking forward
Sent from my Z2 Plus using Tapatalk
Click to expand...
Click to collapse
Dont quote everything. Fvck!
El Psy Congroo
https://t.me/joinchat/ExDwekLF21qSDmOwudq3gg I suggest you to join here @Annabathina
Interesting! Will try it out.
Thanks a lot for sharing!
Update. Be careful when flashing! Selecting save user data still wipes the phone and locks the bootloader. I made a backup like a week ago so didn't lose important data.
Can I use QFIL to flash this?
El Psy Congroo
Magz Heaven said:
Can I use QFIL to flash this?
El Psy Congroo
Click to expand...
Click to collapse
of course you can but I did not tried on QFIL
it works excellent on Mi Flash tool including deep partitions , bootloader locking etc
daviduco said:
Is this stock indian? What modifications does it has?
Click to expand...
Click to collapse
Its just the Indian version without any chinese apps or bloatwares... Indian version lacks some features which are present in the Chinese version and has some bugs too
I have flash today the 7.0(as you given for downloading) firmware using mi flash tool the process was successful but after that I have tried to install AEX 4.6 but Volte was not working then I flashed the official 6.0 firmware using QFIL Volte we as enabled then I again tried to flash AEX but Volte was not working even I have turned on Volte in stock rom before flashing custom ROM
Any help?
kany1 said:
I have flash today the 7.0(as you given for downloading) firmware using mi flash tool the process was successful but after that I have tried to install AEX 4.6 but Volte was not working then I flashed the official 6.0 firmware using QFIL Volte we as enabled then I again tried to flash AEX but Volte was not working even I have turned on Volte in stock rom before flashing custom ROM
Any help?
Click to expand...
Click to collapse
wowo did you really flash a 7.x ROM on top of 6.x stock?
fallen.kn said:
wowo did you really flash a 7.x ROM on top of 6.x stock?
Click to expand...
Click to collapse
Before flashing with mi flash tool I was using AEX 4.6 and then i tried this flashing and when i was having problem with Volte then I flashed the original firmware (marshmallow) using QFIL)Volte was working then I flash AEX 4.6 but then also Volte was not working. I don't know why that strange behavior was there with Volte because I have flashed tons of rom before and I know all the procedure that how to flash a custom rom. So i think there was some problem with the package which is provided for flagging with mi tool because the flashing was done using EDL method. But my Volte is again working fine because someone provide the solution on AEX 4.6 discussion.
When I click on Reboot EDL , my device just reboots to system. How does the EDL mode looks like? Is it like fastboot mode? Why is my device booting into system again. I followed all the steps provided, am i missing somthing
Phone isn't booting into edl mode... Instead of that phone is rebooting.
I had the same problem
kany1 said:
Before flashing with mi flash tool I was using AEX 4.6 and then i tried this flashing and when i was having problem with Volte then I flashed the original firmware (marshmallow) using QFIL)Volte was working then I flash AEX 4.6 but then also Volte was not working. I don't know why that strange behavior was there with Volte because I have flashed tons of rom before and I know all the procedure that how to flash a custom rom. So i think there was some problem with the package which is provided for flagging with mi tool because the flashing was done using EDL method. But my Volte is again working fine because someone provide the solution on AEX 4.6 discussion.
Click to expand...
Click to collapse
What was the solution? I had the same problem.
I think developers are sleeping... Nobody is giving solution.
TWRP PRO For Samsung Galaxy E5
HOLA TWRP PRO is here for Galaxy E5 3G (All Variant) By Me
This TWRP Support AROMA File Manager and opened all the features that do not exist
this is Project TWRP Pro, original twrp belongs to teamwin and i modify so it can,, [format / backup / restore] all the partitions , Twrp is reading the .pit file on a device and running the user command
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
FeatureVersion 3.2.1-1
#Unlock Feature | Backup/Restore/Format Partition
Code:
IMEI 1
IMEI 2
EFS
APN-nohls
RPM
MODEM
HIDDEN
QSEE
QHEE
PERSDATA
USB OTG
PRELOAD and+Support All language
#Unlock | Unmount/mount Read/Write partition
Code:
EFS
HIDDEN
APNNOHLS
PERSDATA
PRELOAD
OTG and more
Theme Support
and more Boss
INSTAL GUIDE
- .tar instal with odin
- .img instal with Rash.apk or Instal with Twrp and select instal image
Devices compatible with TWRP PRO
- All Device E500H/M/F
100% I tested Salam Oprek Boss Kuh....
DOWNLOAD
E500H/M/F : DOWNLOAD
Thanks
-ALLAH SWT
-@jackeagle
-Me
-Credits to TeamWin
Screenshot
If all this works please click thanks button :good:
XDA:DevDB Information
UNOFFICIAL TWRP PRO, Tool/Utility for all devices (see above for details)
Contributors
RioFebrian
Source Code: https://github.com/MSM8916-Samsung/android_kernel_samsung_msm8916
Version Information
Status: Stable
Current Stable Version: 3.2.1-1
Stable Release Date: 2018-02-07
Created 2018-02-20
Last Updated 2018-02-20
Reserved
Changelog
Code:
# v3.2.1-1
-New Twrp Based v3.2.1-1
-New Kernel
-New Kernel For E7
-Supported App Aroma
-Supported Android 5.1.1 - 8.x.x ( UP )
-Supported OTG Feature
-Supported Remove Miui Account
-Fix Mtp .. . . ETC
end
Hey Bro Otg Working Fine In Twrp And I Am Very Thankfull For That But I Need Otg Working In Stock rom
Is There Any Way To Mount otg in Stock Rom or Any other Rom
mkm171996 said:
Hey Bro Otg Working Fine In Twrp And I Am Very Thankfull For That But I Need Otg Working In Stock rom
Is There Any Way To Mount otg in Stock Rom or Any other Rom
Click to expand...
Click to collapse
you can search them on google
RioFebrian said:
you can search them on google
Click to expand...
Click to collapse
Can you tell me please
mkm171996 said:
Can you tell me please
Click to expand...
Click to collapse
I do not understand what you are talking about
sorry, i use google translate
Custom Binary (recovery) Blocked By R/L
My device is Samsung Galaxy E5 (SM-E500H)
I want to flash twrp this version on my device, but it always failed.
it says "Custom Binary (recovery) Blocked By R/L
what should I do??
hishigisonic said:
My device is Samsung Galaxy E5 (SM-E500H)
I want to flash twrp this version on my device, but it always failed.
it says "Custom Binary (recovery) Blocked By R/L
what should I do??
Click to expand...
Click to collapse
Chances are your phone is blocked by knox or samsung account, and i never found such problem, can you send me the picture?
version for e7 is available
RioFebrian said:
version for e7 is available
Click to expand...
Click to collapse
Thanks for This great work
?????????
---------- Post added at 11:11 AM ---------- Previous post was at 11:09 AM ----------
RioFebrian said:
version for e7 is available
Click to expand...
Click to collapse
Thanks for This great work
I testing all roms and recovery
hacker812c said:
Thanks for This great work
---------- Post added at 11:11 AM ---------- Previous post was at 11:09 AM ----------
Thanks for This great work
I testing all roms and recovery
Click to expand...
Click to collapse
have you tested it already?
RioFebrian said:
have you tested it already?
Click to expand...
Click to collapse
Yes
in twrp flash img is two options to flash => boot or recovery
i flashed recovery and not start correctly
my question this img is flash in boot.img ? wait
hacker812c said:
Yes
in twrp flash img is two options to flash => boot or recovery
i flashed recovery and not start correctly
my question this img is flash in boot.img ? wait
Click to expand...
Click to collapse
For twrp .img
instal image and select recovery
wait report
RioFebrian said:
For twrp .img
instal image and select recovery
wait report
Click to expand...
Click to collapse
I selected flash to recovery and not run correctly
I using twrp by Rizzo
---------- Post added at 12:27 PM ---------- Previous post was at 12:22 PM ----------
RioFebrian said:
For twrp .img
instal image and select recovery
wait report
Click to expand...
Click to collapse
I selected recovery and not run correctly
I using twrp by Rizzo in This Post
https://forum.xda-developers.com/ga...recovery-twrp-touch-recovery-sm-e700-t3267563
hacker812c said:
I selected flash to recovery and not run correctly
I using twrp by Rizzo
---------- Post added at 12:27 PM ---------- Previous post was at 12:22 PM ----------
I selected recovery and not run correctly
I using twrp by Rizzo in This Post
https://forum.xda-developers.com/ga...recovery-twrp-touch-recovery-sm-e700-t3267563
Click to expand...
Click to collapse
Hm
I do not understand what you say
test rom cm13 e5 in galaxy e7
And instal night core kernel, waiting u report
RioFebrian said:
Hm
I do not understand what you say
test rom cm13 e5 in galaxy e7
And instal night core kernel, waiting u report
Click to expand...
Click to collapse
Wait please i´m office in this moment
The recovery fail after flash
hacker812c said:
Wait please i´m office in this moment
The recovery fail after flash
Click to expand...
Click to collapse
np bro, if twrp pro is problematic, use twrp that works for rom installation
RioFebrian said:
np bro, if twrp pro is problematic, use twrp that works for rom installation
Click to expand...
Click to collapse
kkk perfect
Wait i testing cm13 wait 10 minutes i repport
hacker812c said:
kkk perfect
Wait i testing cm13 wait 10 minutes i repport
Click to expand...
Click to collapse
Im online 30min
And waiting u report