Related
I tried various buttons combinations but none of them worked. I can only enter something called 'emergency mode'.
Is this means that I can't install TWRP?
Also I have question how to enter fastboot and download mode.
- TWRP: use vineethp guide, or flash it automatically with Cris Kernel (root requiered)
- FastBoot: not officially unlocked, but you can make it available by adb shell (I think)
- Download Mode: while device is off, press and hold volume up key, then plug the usb cable to your PC and then to the phone, after that the phone will startup in download mode.
Note: You can also enable/install/access to fastboot and twrp from just download mode, but for this will be necessary to use some adb shell commands.
Krystiannnnnn said:
I tried various buttons combinations but none of them worked. I can only enter something called 'emergency mode'.
Is this means that I can't install TWRP?
Also I have question how to enter fastboot and download mode.
Click to expand...
Click to collapse
Complete Guide
https://forum.xda-developers.com/lg-k10/how-to/guide-unlock-bt-install-twrp-download-t3574701
CrashOverride93 said:
- TWRP: use vineethp guide, or flash it automatically with Cris Kernel (root requiered)
- FastBoot: not officially unlocked, but you can make it available by adb shell (I think)
- Download Mode: while device is off, press and hold volume up key, then plug the usb cable to your PC and then to the phone, after that the phone will startup in download mode.
Note: You can also enable/install/access to fastboot and twrp from just download mode, but for this will be necessary to use some adb shell commands.
Click to expand...
Click to collapse
Thanks!
pvineeth97 said:
Complete Guide
https://forum.xda-developers.com/lg-k10/how-to/guide-unlock-bt-install-twrp-download-t3574701
Click to expand...
Click to collapse
Thanks, but when I run LGUP it shows my device model as 'unknown' and that's why I can't flash rom
Krystiannnnnn said:
> LGUP shows 'unknown' model so I can't refurbish K420n10B_00_0524.kdz
> I can't modify /cust/OPEN_COM/cust_OPEN_EU.prop because I don't have root
> I can't root my device because bootloader is locked
> I can't unlock bootloader because in this topic ( https://forum.xda-developers.com/lg-k10/how-to/bootloader-unlocked-guys-bootloader-t3558810 ) I see that I need to use LGUP first
> I can't use LGUP because it shows ... etc.
(lol)
What do I suppose to do? I tried to install TWRP but it needs bootloader to be unlocked :/
btw I trying to install custom kernel ( https://forum.xda-developers.com/lg-k10/development/cris-kelo-kernel-1-0-t3563962 )
EDIT/ I just noticed that this is LG G4 forum but I got reference form here https://forum.xda-developers.com/lg-k10/how-to/bootloader-unlocked-guys-bootloader-t3558810 so I guess that it should work on LG K10 as well
Click to expand...
Click to collapse
Krystiannnnnn said:
Thanks!
Thanks, but when I run LGUP it shows my device model as 'unknown' and that's why I can't flash rom
Click to expand...
Click to collapse
https://forum.xda-developers.com/lg-k10/how-to/guide-upgrade-downgrade-lg-k10-t3488250
pvineeth97 said:
Complete Guide
https://forum.xda-developers.com/lg-k10/how-to/guide-unlock-bt-install-twrp-download-t3574701
Click to expand...
Click to collapse
pvineeth97 said:
https://forum.xda-developers.com/lg-k10/how-to/guide-upgrade-downgrade-lg-k10-t3488250
Click to expand...
Click to collapse
It still shows 'unknown model'. Also UPPERCUT shows file writing error
Krystiannnnnn said:
It still shows 'unknown model'. Also UPPERCUT shows file writing error
Click to expand...
Click to collapse
Contact me on hangouts: [email protected]
Hi,
I had Global MIUI rom and my fingerprint sensor didn't work well, sometimes it worked and stopped after a while, and sometimes didn't work at all. I searched online and saw many people have this problem with the Mi 5s and its horrible "ultra sonic" sensor, so I decided to try different ROMs, tried Xiaomi.eu and it still didn't work well, and now I'm with Lineage OS, which the most awesome OS I could get in my Xiaomi, but the fingerprint still doesn't work.. When I try to add fingerprint in the settings, and it says "put your finger on the sensor....", I put my finger (long press) and after few seconds the windows just closes and go to desktop..
Please avoid suggesting solutions such as enable nav bar, or disable home button long press action, I tried everything really, it doesn't matter what ROM I install, or what action I assign to the home button, or if I try to set it up when the Android loads for the first time, still the fingerprint sensor doesn't recognize finger or responding at all, it's a much deeper problem than that. Btw the home button itself works great, responding, vibrating, and does what it supposed to do.
My problem is I have no idea if it's a hardware or software problem. Is there a certain way to check the phone recognize my fingerprint sensor hardware? or maybe a way to make sure it's completely ****, that I'll stop trying to make it work?
I really miss the fingerprint sensor.. before this phone I used it all the time.
I also asked this in LineageOS thread, and user "xxal" suggested it might be a deep firmware problem, not in the ROM level.
Does anyone have an idea where can I find a good firmware for me that might fix it? Tried to search online without success.
Thanks in advanced.
#####################
UPDATE - SOLVED!!! thanks to david_korku
I managed to flash latest miui china dev in EDL Mode, and now the sensor is working again!!
Downloaded "Xiaomi Mi 5s Latest China Developer Version Fastboot File Download" from here: http://en.miui.com/a-234.html
And followed this guide (Part II only): http://en.miui.com/thread-478922-1-1.html
You can try to enable "Menu" on a long press. Or install ZCX TWRP, mount persist partition, go to persist folder in recovery and rename folder 'fingerprint' to 'fingerprint.old'.
BlackJetCat said:
You can try to enable "Menu" on a long press.
Click to expand...
Click to collapse
Thanks, tried that, doesn't help
BlackJetCat said:
Or install ZCX TWRP, mount persist partition, go to persist folder in recovery and rename folder 'fingerprint' to 'fingerprint.old'.
Click to expand...
Click to collapse
Will it require factory reset?
Is it dangerous / can brick my phone in anyway?
Where can I download the official and latest version for capricorn? here?
Fingerprint problems are generally caused by persist partition. When you flash a rom by TWRP or Miflash fastboot, persist partition is untouched.
I solved that problems flashing latest miui china dev by mi flash but in EDL Mode, now works like a charm in any rom
Maybe this helps you (Part 2): http://en.miui.com/thread-478922-1-1.html
david_korku said:
Fingerprint problems are generally caused by persist partition. When you flash a rom by TWRP or Miflash fastboot, persist partition is untouched.
I solved that problems flashing latest miui china dev by mi flash but in EDL Mode, now works like a charm in any rom
Maybe this helps you (Part 2): http://en.miui.com/thread-478922-1-1.html
Click to expand...
Click to collapse
Thanks! but will I be able to install LineageOS afterwards? or I'll be stuck with the china MIUI in order for the fingerprint to keep working?
I´m using latest Lineage OS with fingerprint working, no problem with that
quarvin said:
Thanks! but will I be able to install LineageOS afterwards? or I'll be stuck with the china MIUI in order for the fingerprint to keep working?
Click to expand...
Click to collapse
david_korku said:
I´m using latest Lineage OS with fingerprint working, no problem with that
Click to expand...
Click to collapse
That's good news! now I only need to find the time to install all my stuff all over again.
Thanks for the info sharing, I'll update after I'll try it.
If someone here with the same problem try it, please report the results here.
david_korku said:
I solved that problems flashing latest miui china dev by mi flash but in EDL Mode
Click to expand...
Click to collapse
Hi again, how do I flash in EDL mode? do I have to buy / make a special cable? or if I have unlocked bootloader I don't need that?
Will it work without EDL mode? or it's necessary?
No special cable is needed, and it works with unlocked bootloader (mine is unlocked). Instructions are in miui link. If you use windows, it is important install qualcomm driver having disabled driver signature enforcement (more info here: http://www.gizbeat.com/9603/a-digit...le-driver-signature-verification-enforcement/ )
quarvin said:
Hi again, how do I flash in EDL mode? do I have to buy / make a special cable? or if I have unlocked bootloader I don't need that?
Will it work without EDL mode? or it's necessary?
Click to expand...
Click to collapse
david_korku said:
No special cable is needed, and it works with unlocked bootloader (mine is unlocked). Instructions are in miui link. If you use windows, it is important install qualcomm driver having disabled driver signature enforcement (more info here: http://www.gizbeat.com/9603/a-digit...le-driver-signature-verification-enforcement/ )
Click to expand...
Click to collapse
I can't manage to enter EDL mode, no matter what I do, every time I try to enter EDL it just restart and phone normally.
Tried everything that's written in the links you sent, both using "adb reboot edl", and special fastboot script, everything fails.
Also disabled driver signature enforcement.
When you installed qualcomm driver, windows show you this option (attachment)?
If not, you don´t have qualcomm driver installed correctly
quarvin said:
I can't manage to enter EDL mode, no matter what I do, every time I try to enter EDL it just restart and phone normally.
Tried everything that's written in the links you sent, both using "adb reboot edl", and special fastboot script, everything fails.
Also disabled driver signature enforcement.
Click to expand...
Click to collapse
david_korku said:
When you installed qualcomm driver, windows show you this option (attachment)?
If not, you don´t have qualcomm driver installed correctly
Click to expand...
Click to collapse
Where do I get a qualcomm driver that will match the Mi 5s ?
Reboot windows in disable driver signature enforcement mode and open mi flash with admin rights. In top left corner, click on "Driver" option and after that, click Install/Reinstall on dialog.
quarvin said:
Where do I get a qualcomm driver that will match the Mi 5s ?
Click to expand...
Click to collapse
david_korku said:
When you installed qualcomm driver, windows show you this option (attachment)?
If not, you don´t have qualcomm driver installed correctly
Click to expand...
Click to collapse
ok I found the drivers, it's under "Driver" menu in the MiFlash tool, and I clicked reinstall after I rebooted windows with "disabled driver signature enforcement".
I got the screen you attached 5 times, and clicked "install anyway". After that tried again to enter EDL and the same result.. just restarts..
Having the phone connected to pc in fastboot mode, i use this https://forum.xda-developers.com/redmi-note-3/how-to/guide-reboot-to-edl-mode-fastboot-test-t3398718
And my phone entered in EDL mode (is just a black screen).
quarvin said:
ok I found the drivers, it's under "Driver" menu in the MiFlash tool, and I clicked reinstall after I rebooted windows with "disabled driver signature enforcement".
I got the screen you attached 5 times, and clicked "install anyway". After that tried again to enter EDL and the same result.. just restarts..
Click to expand...
Click to collapse
david_korku said:
Having the phone connected to pc in fastboot mode, i use this https://forum.xda-developers.com/redmi-note-3/how-to/guide-reboot-to-edl-mode-fastboot-test-t3398718
And my phone entered in EDL mode (is just a black screen).
Click to expand...
Click to collapse
Yea I believe you, but when I do it it simply restarts the phone back to the OS
I don´t know how to solve that, sorry . You can try to flash persist.img via fastboot mode (Part I of miui link)
quarvin said:
Yea I believe you, but when I do it it simply restarts the phone back to the OS
Click to expand...
Click to collapse
david_korku said:
I don´t know how to solve that, sorry . You can try to flash persist.img via fastboot mode (Part I of miui link)
Click to expand...
Click to collapse
When I try to erase persist, I get error message:
Code:
FAILED (remote: partition write protected)
I get that error too, that´s the reason why i used EDL
quarvin said:
When I try to erase persist, I get error message:
Code:
FAILED (remote: partition write protected)
Click to expand...
Click to collapse
david_korku said:
I get that error too, that´s the reason why i used EDL
Click to expand...
Click to collapse
It's ok, I appreciate all your effort, thanks mate!
I tried to root my device, and I eventually I managed, but i missed the step to recover my android phone backup from google drive during the startup setup, so I found some tutorial and it seems to tell me erase the phone back to factory so that I can see the startup setup again.
Now the device only boots into TWRP, and I have downloaded two different stock image , V10.0.1.0 and V10.0.2.0, trying to install in recovery mode, so I follow instruction, wipe system before install.
but both of them giving me error, not opening the zip file.
Now I can not use my phone, how can I install a OS please?
luckyvictor said:
I tried to root my device, and I eventually I managed, but i missed the step to recover my android phone backup from google drive during the startup setup, so I found some tutorial and it seems to tell me erase the phone back to factory so that I can see the startup setup again.
Now the device only boots into TWRP, and I have downloaded two different stock image , V10.0.1.0 and V10.0.2.0, trying to install in recovery mode, so I follow instruction, wipe system before install.
but both of them giving me error, not opening the zip file.
Now I can not use my phone, how can I install a OS please?
Click to expand...
Click to collapse
Hello,
I think a solution is to use MiFlash and to restore your phone, you will loose all of your data, your recovery and magisk.
Download link : https://xiaomiflashtool.com/
- Boot your phone in Fastboot and connect it to your computer,
- Extract the stock rom to a folder normally you will obtain some files with a folder called images.
- In MiFlash select this folder.
- Click on refresh, if your phone is connected to your computer and in fastboot mode it will appear.
Now select clean all and click on flash button.
Your phone will reboot normally.
If it doesn't work tell me !
Pierre
If I helped you drop a thanks !
Pierre_C said:
Hello,
I think a solution is to use MiFlash and to restore your phone, you will loose all of your data, your recovery and magisk.
Download link : https://xiaomiflashtool.com/
- Boot your phone in Fastboot and connect it to your computer,
- Extract the stock rom to a folder normally you will obtain some files with a folder called images.
- In MiFlash select this folder.
- Click on refresh, if your phone is connected to your computer and in fastboot mode it will appear.
Now select clean all and click on flash button.
Your phone will reboot normally.
If it doesn't work tell me !
Pierre
If I helped you drop a thanks !
Click to expand...
Click to collapse
There is no stock rom available on that website, so can I use the stock rom that I found on internet? do I need those batch script?
luckyvictor said:
There is no stock rom available on that website, so can I use the stock rom that I found on internet? do I need those batch script?
Click to expand...
Click to collapse
Download this stock oreo rom (You will install pie after if you want) http://bigota.d.miui.com/V9.6.11.0.ODLMIFF/daisy_global_images_V9.6.11.0.ODLMIFF_20181112.0000.00_8.1_8028e3bf1c.tgz
You will obtain an archive, unzip it while you obtain a folder with some .bat ans .sh ans a folder called "images". At that time run MiFlash and select the folder that contain these files. After follow the instructions of the old post
If you have some questions I'm here
Pierre
If I help you drop a thanks: )
Pierre_C said:
Download this stock oreo rom (You will install pie after if you want) http://bigota.d.miui.com/V9.6.11.0.ODLMIFF/daisy_global_images_V9.6.11.0.ODLMIFF_20181112.0000.00_8.1_8028e3bf1c.tgz
You will obtain an archive, unzip it while you obtain a folder with some .bat ans .sh ans a folder called "images". At that time run MiFlash and select the folder that contain these files. After follow the instructions of the old post
If you have some questions I'm here
Pierre
If I help you drop a thanks: )
Click to expand...
Click to collapse
Should I use those script? e.g Flash All, Flash all except storage and also Flash All Except data and Storage?
luckyvictor said:
Should I use those script? e.g Flash All, Flash all except storage and also Flash All Except data and Storage?
Click to expand...
Click to collapse
Flash All
Pierre_C said:
Flash All
Click to expand...
Click to collapse
ok, now I have downloaded it, extract it and using MiFlash tool, it gives me error of length cannot be less than 0
luckyvictor said:
ok, now I have downloaded it, extract it and using MiFlash tool, it gives me error of length cannot be less than 0
Click to expand...
Click to collapse
Send me your logs they are in C:\Xiaomi
Pierre_C said:
Download this stock oreo rom (You will install pie after if you want) http://bigota.d.miui.com/V9.6.11.0.ODLMIFF/daisy_global_images_V9.6.11.0.ODLMIFF_20181112.0000.00_8.1_8028e3bf1c.tgz
You will obtain an archive, unzip it while you obtain a folder with some .bat ans .sh ans a folder called "images". At that time run MiFlash and select the folder that contain these files. After follow the instructions of the old post
If you have some questions I'm here
Pierre
If I help you drop a thanks: )
Click to expand...
Click to collapse
There's already a fastboot Pie rom for mi a2 Lite
http://bigota.d.miui.com/V10.0.2.0....0.PDLMIFJ_20181221.0000.00_9.0_fed1fcdf5d.tgz
Pierre_C said:
Send me your logs they are in C:\Xiaomi
Click to expand...
Click to collapse
[21:22:00]: 在 System.String.Substring(Int32 startIndex, Int32 length)
在 MiUSB.USB.GetUsbNodeInformation(String DevicePath)
在 XiaoMiFlash.code.Utility.TreeViewUsbItem.AddHubNode(String HubPath, String HubNodeName)
在 XiaoMiFlash.code.Utility.TreeViewUsbItem.get_AllUsbDevices()
在 XiaoMiFlash.code.Utility.UsbDevice.GetDevice()
在 XiaoMiFlash.MainFrm.RefreshDevice()
luckyvictor said:
[21:22:00]: 在 System.String.Substring(Int32 startIndex, Int32 length)
在 MiUSB.USB.GetUsbNodeInformation(String DevicePath)
在 XiaoMiFlash.code.Utility.TreeViewUsbItem.AddHubNode(String HubPath, String HubNodeName)
在 XiaoMiFlash.code.Utility.TreeViewUsbItem.get_AllUsbDevices()
在 XiaoMiFlash.code.Utility.UsbDevice.GetDevice()
在 XiaoMiFlash.MainFrm.RefreshDevice()
Click to expand...
Click to collapse
Install xiaomi driver in MiFlash and retry
Pierre_C said:
Install xiaomi driver in MiFlash and retry
Click to expand...
Click to collapse
I have installed the USB driver, the qualcomm usb driver, and install those 5 drivers within MiFlash tool (google, nvidia, microsoft, microsoft, qualcomm), and i still get the same error.
is it because my phone has nothing but only the TWRP? no OS? so it can not be detected by the computer?
luckyvictor said:
I have installed the USB driver, the qualcomm usb driver, and install those 5 drivers within MiFlash tool (google, nvidia, microsoft, microsoft, qualcomm), and i still get the same error.
Click to expand...
Click to collapse
Run MiFlash in administrator
Pierre_C said:
Run MiFlash in administrator
Click to expand...
Click to collapse
Tried, same error.
is it because my phone has nothing but only the TWRP? no OS? so it can not be detected by the computer?
luckyvictor said:
Tried, same error.
is it because my phone has nothing but only the TWRP? no OS? so it can not be detected by the computer?
Click to expand...
Click to collapse
download minimal adb and fastboot and install it. Open it enter "fastboot devices" and send me the output.
Pierre_C said:
download minimal adb and fastboot and install it. Open it enter "fastboot devices" and send me the output.
Click to expand...
Click to collapse
fastboot device does return a id
69d2d83f0505 fastboot
so does it mean I should be able to use MiFlash?
By the way, I really appreciate your help so far, you are so great.
luckyvictor said:
fastboot device does return a id
69d2d83f0505 fastboot
so does it mean I should be able to use MiFlash?
By the way, I really appreciate your help so far, you are so great.
Click to expand...
Click to collapse
Try run flash_all.bat manually
No problem for my help this is normal
Pierre
Pierre_C said:
Try run flash_all.bat manually
No problem for my help this is normal
Pierre
Click to expand...
Click to collapse
it works!!
But something quite strange, the machine is a bit slow, and i have typed the correct (for sure) password for my wifi a few times, and only the 7th or 8th try it connects.
and I dont seem to be able to install apps from google play, they all stuck in download pending.
Can I actually 'factory reset' the phone to the status when it was out of the box?
luckyvictor said:
it works!!
But something quite strange, the machine is a bit slow, and i have typed the correct (for sure) password for my wifi a few times, and only the 7th or 8th try it connects.
and I dont seem to be able to install apps from google play, they all stuck in download pending.
Can I actually 'factory reset' the phone to the status when it was out of the box?
Click to expand...
Click to collapse
Yes try a factory reset or try restart your phone
Pierre_C said:
Yes try a factory reset or try restart your phone
Click to expand...
Click to collapse
I used erase all data (factory reset), and this was how I ended up booting only into TWRP.
Hello !! I have a BIG problem. My Xiaomi 12x was on weekly update, until today. I wanted to update it by fastboot because the new update led to Miui 14 and therefore Android 13. I downloaded the Xiaomi.eu Rom on my pc, unzipped it and put my phone in Fastboot mode. In the file there was a .bat file which allowed to launch the update, and I launched it. Everything worked fine, but my phone won't start now. Could you help me please it's VERY important
UNMECOOL said:
Hello !! I have a BIG problem. My Xiaomi 12x was on weekly update, until today. I wanted to update it by fastboot because the new update led to Miui 14 and therefore Android 13. I downloaded the Xiaomi.eu Rom on my pc, unzipped it and put my phone in Fastboot mode. In the file there was a .bat file which allowed to launch the update, and I launched it. Everything worked fine, but my phone won't start now. Could you help me please it's VERY important
Click to expand...
Click to collapse
Thread for 12X: https://forum.xda-developers.com/f/xiaomi-12x.12615/
no fastboot mode, no recovery?
NOSS8 said:
Thread for 12X: https://forum.xda-developers.com/f/xiaomi-12x.12615/
no fastboot mode, no recovery?
Click to expand...
Click to collapse
Thank and yes, no fastboot or recovery mode, just a black screen with no responses at all
UNMECOOL said:
Thank and yes, no fastboot or recovery mode, just a black screen
Click to expand...
Click to collapse
Have you tried with the charger plugged in?
What rom did you flash(full name)?
UNMECOOL said:
Hello !! I have a BIG problem. My Xiaomi 12x was on weekly update, until today. I wanted to update it by fastboot because the new update led to Miui 14 and therefore Android 13. I downloaded the Xiaomi.eu Rom on my pc, unzipped it and put my phone in Fastboot mode. In the file there was a .bat file which allowed to launch the update, and I launched it. Everything worked fine, but my phone won't start now. Could you help me please it's VERY important
Click to expand...
Click to collapse
Try to install from fastboot with format data
jholfran3 said:
Try to install from fastboot with format data
Click to expand...
Click to collapse
https://forum.xda-developers.com/t/...tboot-update-xiaomi-12x.4531729/post-87877055
NOSS8 said:
Have you tried with the charger plugged in?
What rom did you flash(full name)?
--------------------------------------------------------------------------------------------------Reply : Yes i tried, but no signal even if i plug the charger in, the phone is still full black.
And i give you the name of the fastboot rom here and the link :
== xiaomi.eu_multi_XM12X_V14.0.22.12.8.DEV_v14-13-fastboot LINK == https://sourceforge.net/projects/xi...mi.eu/MIUI-WEEKLY-RELEASES/V14.0.22.12.8.DEV/
Click to expand...
Click to collapse
Download link == https://sourceforge.net/projects/xi...14.0.22.12.8.DEV_v14-13-fastboot.zip/download
Its seems that you bricked your phone
Do these and report here
1- Is PC recognize something when you connect your phone to it
Please look at device manager. Something like qusb bulk or qdloader 9008 port
2- If the answer of the above question is no press volume down and power button together for 15 sec
emprazol said:
Its seems that you bricked your phone
Do these and report here
1- Is PC recognize something when you connect your phone to it
Please look at device manager. Something like qusb bulk or qdloader 9008 port
2- If the answer of the above question is no press volume down and power button together for 15 sec
Click to expand...
Click to collapse
Hello, for the first, no my pc recognize nothing at all, for the second, also nothing just a black screen with no responses at all
Hello,
I tried to install a GSI rom on my phone, but I encountered a lot of problems, I couldn't erase the system because it said "system" partition was not found. So I tried many things like editing the partitions. But now, my phone is stuck in bootloop, and I can't enter recovery mode or fastboot mode.
Please help :/
lonyyy_ said:
Hello,
I tried to install a GSI rom on my phone, but I encountered a lot of problems, I couldn't erase the system because it said "system" partition was not found. So I tried many things like editing the partitions. But now, my phone is stuck in bootloop, and I can't enter recovery mode or fastboot mode.
Please help :/
Click to expand...
Click to collapse
Hi!
I struggled with this for a while as well but I found what works for me.
first, make sure you have the proper drivers installed ( just google MTK drivers and you'll find plenty of links for auto-installers ).
you gotta bypass the auth and flash with sp flash tool.
for the bypass:
I use MTK META Utility v75 ( again, google and you'll find it ).
click "disable Auth", then plug in your phone while holding volume up button. If it doesn't disable the BRom protection, you gotta use libusb to install the device filter.
Once the auth is disabled, use sp flash tool to flash the stock firmware.
first, in options, click connections, select the right comport.
in format, click the "format all except bootloader". VERY IMPORTANT YOU CLICK THIS.
next in download select the download agent and scatter file ( found inside the fastboot stock rom folder ).
Check everything EXCEPT PRELOADER and click download
RadixMalum said:
Hi!
I struggled with this for a while as well but I found what works for me.
first, make sure you have the proper drivers installed ( just google MTK drivers and you'll find plenty of links for auto-installers ).
you gotta bypass the auth and flash with sp flash tool.
for the bypass:
I use MTK META Utility v75 ( again, google and you'll find it ).
click "disable Auth", then plug in your phone while holding volume up button. If it doesn't disable the BRom protection, you gotta use libusb to install the device filter.
Once the auth is disabled, use sp flash tool to flash the stock firmware.
first, in options, click connections, select the right comport.
in format, click the "format all except bootloader". VERY IMPORTANT YOU CLICK THIS.
next in download select the download agent and scatter file ( found inside the fastboot stock rom folder ).
Check everything EXCEPT PRELOADER and click download
Click to expand...
Click to collapse
Thank you ! But how can I do this, my phone is stuck in a bootloop?
lonyyy_ said:
Thank you ! But how can I do this, my phone is stuck in a bootloop?
Click to expand...
Click to collapse
if you do the whole bypass thingy it's gonna skip certain boot-checks which causes the loop, putting it in a different mode. from there, sp flash tool can access the device.
you can also just hold down the volume up button and then plug in the usb, 9/10 the bypass utillity will catch the BRom
RadixMalum said:
Hi!
I struggled with this for a while as well but I found what works for me.
first, make sure you have the proper drivers installed ( just google MTK drivers and you'll find plenty of links for auto-installers ).
you gotta bypass the auth and flash with sp flash tool.
for the bypass:
I use MTK META Utility v75 ( again, google and you'll find it ).
click "disable Auth", then plug in your phone while holding volume up button. If it doesn't disable the BRom protection, you gotta use libusb to install the device filter.
Once the auth is disabled, use sp flash tool to flash the stock firmware.
first, in options, click connections, select the right comport.
in format, click the "format all except bootloader". VERY IMPORTANT YOU CLICK THIS.
next in download select the download agent and scatter file ( found inside the fastboot stock rom folder ).
Check everything EXCEPT PRELOADER and click download
Click to expand...
Click to collapse
So the BROM protection is now deactivated, but I can't find any COM port in the connection panel. And what is the fastboot stock rom folder ? I need to download the stock rom of Xiaomi 11T?
lonyyy_ said:
So the BROM protection is now deactivated, but I can't find any COM port in the connection panel. And what is the fastboot stock rom folder ? I need to download the stock rom of Xiaomi 11T?
Click to expand...
Click to collapse
alright I'm guessing you'll first need to add the device filter for the port.
download libusb, run it and click add filter. while you have the phone in bypass mode, you should see a mediatek device in the list. add that one.
and yeah. but you can just download it from mi.com!
RadixMalum said:
alright I'm guessing you'll first need to add the device filter for the port.
download libusb, run it and click add filter. while you have the phone in bypass mode, you should see a mediatek device in the list. add that one.
and yeah. but you can just download it from mi.com!
Click to expand...
Click to collapse
Ok, thanks ! I'm downloading the ROM, but in libusb, it doesn't recognize my device...
RadixMalum said:
alright I'm guessing you'll first need to add the device filter for the port.
download libusb, run it and click add filter. while you have the phone in bypass mode, you should see a mediatek device in the list. add that one.
and yeah. but you can just download it from mi.com!
Click to expand...
Click to collapse
Soo... libusb wasn't working, but I figured out that I have like one minute to flash, during this time, it recognizes the com port etc...
First, it says "lib da not match" in download-agent, then in scatter-loading file it says "the scatter file contains an unsupported version"...
lonyyy_ said:
Hello,
I tried to install a GSI rom on my phone, but I encountered a lot of problems, I couldn't erase the system because it said "system" partition was not found. So I tried many things like editing the partitions. But now, my phone is stuck in bootloop, and I can't enter recovery mode or fastboot mode.
Please help :/
Click to expand...
Click to collapse
Sir, from indonesia? I just flash vbmeta with spflashtool, or python brom mode . Sorry bad english
Okay, thanks everyone! I got my phone working again by using mtkclient python and mi flash tool!
RadixMalum said:
Hi!
I struggled with this for a while as well but I found what works for me.
first, make sure you have the proper drivers installed ( just google MTK drivers and you'll find plenty of links for auto-installers ).
you gotta bypass the auth and flash with sp flash tool.
for the bypass:
I use MTK META Utility v75 ( again, google and you'll find it ).
click "disable Auth", then plug in your phone while holding volume up button. If it doesn't disable the BRom protection, you gotta use libusb to install the device filter.
Once the auth is disabled, use sp flash tool to flash the stock firmware.
first, in options, click connections, select the right comport.
in format, click the "format all except bootloader". VERY IMPORTANT YOU CLICK THIS.
next in download select the download agent and scatter file ( found inside the fastboot stock rom folder ).
Check everything EXCEPT PRELOADER and click download
Click to expand...
Click to collapse
Hey,
My friend is trying to follow your reply in order to get her phone out of bootloop.
Not sure if you are aware but if you google for "MTK META Utility v75" as you instruct people to do... you get a wall of spam uploads which are zip files with passwords on... which gives the impression that basically every spammer wanting to get a virus onto your computer, or youtuber wanting to force you to watch their videos, is uploading crap marked as "MTK META Utility".
Perhaps you could actually provide links to trustworthy software or make a topic with a proper guide for people to follow, instead of just a reply to someone's question?
lonyyy_ said:
Okay, thanks everyone! I got my phone working again by using mtkclient python and mi flash tool!
Click to expand...
Click to collapse
Please can you tell me how?? I am having the same problem and my phone is just rebooting constantly but I cant open fastboot. Please or I don't know if my phone is dead
I have some experience with rooting this device and I can tell you that this device can install TWRP but it doesn't boot system after install ikr sad