Possible case - Samsung Galaxy S8+ Accessories

I'm looking at getting a SUPCASE Unicorn Beetle Style case for my s8+. Has anyone had any dealings with this case?
Running
Sent from my iPhone using Tapatalk

I have one for my S8+, I currently use one on my Note 5 and had one on my late Note 7, I like them:
-Well Made (Reminds me of UAG in appearance)
-Offer Very Good Protection
-Less expensive than many other cases.
Cheers,
BR

Brau0303 said:
I have one for my S8+, I currently use one on my Note 5 and had one on my late Note 7, I like them:
-Well Made (Reminds me of UAG in appearance)
-Offer Very Good Protection
-Less expensive than many other cases.
Cheers,
BR
Click to expand...
Click to collapse
Thanks. I'll put it in the basket. Just need as card now.
Sent from my iPhone using Tapatalk

Never heard of that case. Looked it up and it's pretty nice. I'm going to use ringke fusion

never heard of it but when i look it up it looks like the uag cases.
Much to thick for me. but i bet they will show up soon if they made it for alot of other phones.
ME myself i got a rhinoshield bumper coming because i dont like the bulk for other cases.
But for now i got a simple thin silicone case for the time being.

I got the case I mentioned.
As first impressions go it's very good. Feels like it could withstand some punishment and doesn't add better much bulk at all.
My only issue is I can't find the buttons without looking, they don't t feel to have any identifiable marks on them, but when you look the volume rockers have + & - icons and the power and bixby buttons ha e indentations on them but not pronounced enough.
I'll give it a few weeks before I make a decision on if it stays on.
Running

running water said:
I got the case I mentioned.
As first impressions go it's very good. Feels like it could withstand some punishment and doesn't add better much bulk at all.
My only issue is I can't find the buttons without looking, they don't t feel to have any identifiable marks on them, but when you look the volume rockers have + & - icons and the power and bixby buttons ha e indentations on them but not pronounced enough.
I'll give it a few weeks before I make a decision on if it stays on.
Running
Click to expand...
Click to collapse
Had one for the Note 7 and its replacement S7e now have one for the s8+ best case for protecting the corners and edges of the infinity displays by far. You made the right choice.

ShrekOpher said:
Had one for the Note 7 and its replacement S7e now have one for the s8+ best case for protecting the corners and edges of the infinity displays by far. You made the right choice.
Click to expand...
Click to collapse
I do really like the feel of it and the confidence it gives me to use my phone away from a soft play area! ?
But I need to get used to the buttons on it.
Running

Related

Which Spigen case is best for Nexus 5, between the neohybrid and slimarmour?

Hey guys,
I know this is totally subjective. However, I have been looking for a case for my nexus 5. I like the Spigen NeoHybrid, and Slimarmor so far, however I have heard bad things about the Neohybrid, and that the Slimarmor is somewhat bulky. Some guidance is needed. Thank you!
Joegrind27 said:
Hey guys,
I know this is totally subjective. However, I have been looking for a case for my nexus 5. I like the Spigen NeoHybrid, and Slimarmor so far, however I have heard bad things about the Neohybrid, and that the Slimarmor is somewhat bulky. Some guidance is needed. Thank you!
Click to expand...
Click to collapse
Spigen cases are always good to use and I have used slim armour of it...and I just love that case....so my vote will go for Slim Armour.....
---------- Post added at 02:04 PM ---------- Previous post was at 01:58 PM ----------
you can also check out the ultra hybrid one too...thats too a really nice case to go for....:good:
sometimes thick cases will mess with the camera by changing the light sensitivity because the lens and/or flash are shrouded. go on amazon and read the reviews... i decided against the slim armor because of potential camera issues and because people complained about the buttons either being hard to press, or no feedback/bad feel from the buttons. but it does look like it would protect the phone well and with tpu instead of cheap silicone like all those old iphone cases i had to deal with years ago i'm sure it's still a pretty good case. but i went with the neo hybrid and it should be here this afternoon so i'll give my opinion then.
I have the slim armour. I was a bit disappointed at how bulky it is when I first put it on my Nexus, however I have grown accustomed to it and it is a good quality case.
The button feedback is actually the best I've ever experienced on a case. Really nice.
I would personally prefer a slimmer case but if you're not worried about bulk, slim armour is a definite one to look at.
I got a Slim Armor and the buttons are no good. Makes them feel spongy. I'm returning it and ordering a Neo Hybrid.
Pretty awesome. Thank you guys!! Anyone encountered fitting problems with the neohybrid, especially the use of the headset jack?
I have the slimarmor. The power button is a bit too snug and i feel alot of dusk seeps into the bottom of the case.
However, I have dropped the phone 2 times on the ground outside (concrete) and there's not one nick on the case itself and the phone is perfectly fine. It does add a bit of bulk, but I got used to it pretty quickly. I can't promise I'll stay with this one for good, but It will definitely be in rotation with other cases
AceKingNYC said:
I have the slimarmor. The power button is a bit too snug and i feel alot of dusk seeps into the bottom of the case.
However, I have dropped the phone 2 times on the ground outside (concrete) and there's not one nick on the case itself and the phone is perfectly fine. It does add a bit of bulk, but I got used to it pretty quickly. I can't promise I'll stay with this one for good, but It will definitely be in rotation with other cases
Click to expand...
Click to collapse
A drop test! Thanks for your service:good:
Feeling better about my slim armor now!
I got the neo hybrid. I was unhappy with the size it made the phone and The grippiness. I think it looks nice though.
I returned it. Now have the nilkin v series flip case on order.
Sent from my Nexus 5 using xda app-developers app
I have both and like the slim armor better. Better protection and list slippery. If you want slimmer I also have the ultra hybrid which I feel is made better than the neo hybrid and is slimmer. That's my 2 cents on the issue.
i have the neo hybrid and think it's fine as a case. the case buttons transfer the tactile feel of the phone's buttons very well.
AceKingNYC said:
I have the slimarmor. The power button is a bit too snug and i feel alot of dusk seeps into the bottom of the case.
However, I have dropped the phone 2 times on the ground outside (concrete) and there's not one nick on the case itself and the phone is perfectly fine. It does add a bit of bulk, but I got used to it pretty quickly. I can't promise I'll stay with this one for good, but It will definitely be in rotation with other cases
Click to expand...
Click to collapse
It is good to have real life drop test. This is the exact reason why I bought this case (ordered, shipped, but not received yet).
I have the Neo Hybrid on mine and I love it. It makes the phone easier to hold and adds a nice layer of protection. Plus it looks pretty awesome!
Sent from my Nexus 5 using XDA Premium 4 mobile app
kevintstephens said:
I have the Neo Hybrid on mine and I love it. It makes the phone easier to hold and adds a nice layer of protection. Plus it looks pretty awesome!
Sent from my Nexus 5 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Any issues with camera flash?
Sent from my Nexus 7 using Tapatalk 4
i just got the neo hybrid. it adds more bulk to the phone than i thought... the back is thin but something about squaring off the back makes it feel a lot bigger. also the tpu + bumper adds some width. i was afraid of button access problems through the cutouts with some of the tpu cases out there so i didn't go with a cheap tpu case, maybe i would have been happier with a contoured case rather than this but overall it's a very good case. the power button feedback is a little less, but the button works consistently, my dennon headphones fit, but others might not, the phone stills charges wirelessly without problems.
I picked up the Slim Armor and love it. Great protection around the corners, screen, and camera lens. For a two layer case, it doesn't feel bulky at all. Fits very nice in the hand IMO.
slick_rick said:
Any issues with camera flash?
Sent from my Nexus 7 using Tapatalk 4
Click to expand...
Click to collapse
None that I've noticed with my Neo Hybrid. I just wish it wasn't so difficult to remove.
I haven't actually tried either case (because I haven't even gotten my phone yet... backorder ) but I would trade bulkiness for protection by getting the dual layer Slim Armor. I have had a dual layer case on my current phone and I have dropped a couple times over the past two years. In combination with a screen protector, a dual layer case can be the best insurance for your phone without actually paying $100-200 for real insurance.
I was originally planning on the Neo Hybrid just cuz it looks so damn nice but more than 1 person has said its very slippery... and that'd be silly to buy a case only for you to drop it more often.
I ordered the Slim Armor instead, waiting for it to arrive. Amazon's shipping is kind of wonky, they said 2 day delivery but the package has just sat at UPS's facilities for the past 3 days and its scheduled for tomorrow- oh wait, of course UPS changed the date to Thursday.
Hate UPS, but cant wait to get my hands on the case. Hoping it doesn't have the accursed power button issue (though I reckon it won't be too difficult to fix anyway).
I recently got the slim armor. Quality case. Make sure you play around with putting it on. The buttons are very sensitive as you've probably read elsewhere and would turn the phone off. After about 2 tries I got it on and the buttons are working normally.:good:

Poetic Atmosphere Case

Hey there fellow XDA members and nexus 5 owners first post on the forums here and I have a question about a case hopefully someone can chime in here. So since receiving the phone I've been in search of the perfect slim case to fit my needs. So far I have tried the ringke and spigen ultra thin cases and I like them very much, low profile and enough protection where I need it. Anyway in an effort to quit blindly buying anymore cases thought I'd post here since the community is quite big. I just found this case on Amazon:
MOD EDIT: Referral Link removed
Looks like a decent case that would provide good protection all around and that clear gray color must be really nice. My question is has anyone purchased this case yet? If so how do you like it? I don't have any experience with this particular company but they do offer quite a lot of products. If no one owns this yet though I might have to take the dive. Thanks in advance for your input.
dzaster89 said:
Hey there fellow XDA members and nexus 5 owners first post on the forums here and I have a question about a case hopefully someone can chime in here. So since receiving the phone I've been in search of the perfect slim case to fit my needs. So far I have tried the ringke and spigen ultra thin cases and I like them very much, low profile and enough protection where I need it. Anyway in an effort to quit blindly buying anymore cases thought I'd post here since the community is quite big. I just found this case on Amazon:
Looks like a decent case that would provide good protection all around and that clear gray color must be really nice. My question is has anyone purchased this case yet? If so how do you like it? I don't have any experience with this particular company but they do offer quite a lot of products. If no one owns this yet though I might have to take the dive. Thanks in advance for your input.
Click to expand...
Click to collapse
Poetic makes decent cases. I had an Atmosphere on my One but they suffered from problems with the rubber separating if you pulled the phone at the case. It looks like they may have solved that issue on this model by making the rubber go down farther. For $5 I will probably end up trying one out.
Awesome, does it add a lot of bulk to the phone or is it fairly slim?
Sent from my Nexus 5 using XDA Premium 4 mobile app
Woah thanks for that review, the case looks pretty good and slim indeed. I have the black version of the phone and would like to show off that nexus logo. Guess I'm gonna be adding this to my collection of cases. lol will update when I get it.
Sent from my Nexus 5 using XDA Premium 4 mobile app
GhostNGoblins91 said:
The case does not add much bulk to the phone at all, IMO. A mini-review follows:
The style of this case is impeccable, in that it mostly stays out of the way to let the Nexus 5 shine. I have the white back N5, and the Atmosphere’s clear back shows off the vibrant color well. This is not a frosted back; it pretty much is completely clear, with strategically placed lines of rubber for the camera and also for reducing the slipperiness of the backend. The same matte gray rubber goes around the border and raises above the screen to provide a slight lay-on-table lip. Finally, the buttons are covered, but the buttons are still responsive, the lock button more so than the volume rocker.
The Google Nexus 5 is a very light phone. The lightest I’ve owned, actually. With the the Atmosphere on, it remains a slim, light phone. So while I want to protect this device, I also don’t want to weigh it down. I liked the Atmosphere case from from Poetic previously for the Nexus 4, and I was very happy with it, but I read about some durability problems. It remains to be seen if the Nexus 5 case will have better longevity, but I can say the rubber on this does feel sturdier than in the past reiteration. I am quite happy with this purchase. From this Nexus 5 version, I totally agree that this company does listen to feedback and keep making improvements. I am going to continue to support them through future devices.
Click to expand...
Click to collapse
Your review made me buy one thankyou , I swore I was going to keep my case addiction under wraps , there goes that idea............lol
delete
I just got it in the mail today and so far so good. I had the same case on my HTC One the entire time I had the phone and the case was great.
I had an issue the the first Atmosphere case for my HTC it started coming apart. I contact the manufacture they stated there was a defect, they sent me a new case free of charge and let me keep the old one not that I wanted it. The 2nd case never had an issue. As soon as I found the Atmosphere for the Nexus 5 I ordered it. Good case and good customer service... cant beat it.
Philly Jim said:
Your review made me buy one thankyou , I swore I was going to keep my case addiction under wraps , there goes that idea............lol
Click to expand...
Click to collapse
I feel the same way, glad to hear I'm not the only one. Lol
Sent from my Nexus 5 using XDA Premium 4 mobile app
In any "case" (no pun intended) they come with a 3yr warranty so it's a great buy.
I'm a warranty kind of guy and 3 years sounds pretty solid for a case. (No pun intended either) Lol
One thing I forgot to mention in the OP, I purchased the spigen crystal shell which is completely clear and had an issue that many others had with the flash showing a glow on pictures caused by the case being lit up or possibly the cutout itself. Anyone who has it care to test that out? If its not an issue here poetic has my business.
Sent from my Nexus 5 using XDA Premium 4 mobile app
GhostNGoblins91 said:
The case does not add much bulk to the phone at all, IMO. A mini-review follows:
The style of this case is impeccable, in that it mostly stays out of the way to let the Nexus 5 shine. I have the white back N5, and the Atmosphere’s clear back shows off the vibrant color well. This is not a frosted back; it pretty much is completely clear, with strategically placed lines of rubber for the camera and also for reducing the slipperiness of the backend. The same matte gray rubber goes around the border and raises above the screen to provide a slight lay-on-table lip. Finally, the buttons are covered, but the buttons are still responsive, the lock button more so than the volume rocker.
The Google Nexus 5 is a very light phone. The lightest I’ve owned, actually. With the the Atmosphere on, it remains a slim, light phone. So while I want to protect this device, I also don’t want to weigh it down. I liked the Atmosphere case from from Poetic previously for the Nexus 4, and I was very happy with it, but I read about some durability problems. It remains to be seen if the Nexus 5 case will have better longevity, but I can say the rubber on this does feel sturdier than in the past reiteration. I am quite happy with this purchase. From this Nexus 5 version, I totally agree that this company does listen to feedback and keep making improvements. I am going to continue to support them through future devices.
Click to expand...
Click to collapse
Any idea if the headphone jack would accomodate a larger headphone jack, like a 1/8" inch?
Like this:
http://www.basicelectronixs.com/node/image/Blog/1/M50Jack.jpg
GhostNGoblins91 said:
The case does not add much bulk to the phone at all, IMO. A mini-review follows:
The style of this case is impeccable, in that it mostly stays out of the way to let the Nexus 5 shine. I have the white back N5, and the Atmosphere’s clear back shows off the vibrant color well. This is not a frosted back; it pretty much is completely clear, with strategically placed lines of rubber for the camera and also for reducing the slipperiness of the backend. The same matte gray rubber goes around the border and raises above the screen to provide a slight lay-on-table lip. Finally, the buttons are covered, but the buttons are still responsive, the lock button more so than the volume rocker.
The Google Nexus 5 is a very light phone. The lightest I’ve owned, actually. With the the Atmosphere on, it remains a slim, light phone. So while I want to protect this device, I also don’t want to weigh it down. I liked the Atmosphere case from from Poetic previously for the Nexus 4, and I was very happy with it, but I read about some durability problems. It remains to be seen if the Nexus 5 case will have better longevity, but I can say the rubber on this does feel sturdier than in the past reiteration. I am quite happy with this purchase. From this Nexus 5 version, I totally agree that this company does listen to feedback and keep making improvements. I am going to continue to support them through future devices.
Click to expand...
Click to collapse
Awesome I was waiting for pics! One question though does the case provide a "seal" against the back of the phone near the earphone jack, camera, and USB port? And what I mean by that is if there is any gaps from where the case and the phone meet? Because that's what I hate with other clear cases, that they have gaps and let dirt and dust in which makes the case look dirty and I have to remove it to clean it often... So if this case is well sealed I think I'd buy it!
how easy is it to take on and off? my gf has the atmosphere for her one, and while it's a great case it's not the easiest to remove. I only use a case at work, so it's getting taken off at the end of the day
GhostNGoblins91 said:
I can't really say for sure as I don't have a large headphone jack myself, but you can see how the headphone port cutout looks on the last image I attached in my review.
I should have mentioned this in my review: this case IS difficult to take off. The fit is very tight and I wouldn't want to have to take this case on and off everyday. This is more of a put-on and leave-on sort of case.
Click to expand...
Click to collapse
So does dust or lint get inside the phone? or does it seem like it would? (since you have the white one you probably wouldnt notice as much) But this is the only thing keeping me from getting it!
GhostNGoblins91 said:
I hadn't had a chance to notice this, but I did wipe down both the Nexus 5 and the case interior before putting it on. The seal is pretty tight around the edges, so I don't anticipate too much dust coming in, but we'll have to see.
Click to expand...
Click to collapse
What about the seal by the headphone jack and micro usb and speakers? does the rubber come in contact with the phone or is it fairly close? Cause thats where most of the dust and debris get in from sticking it in and out of pockets. Thanls for all the info I appreciate it!
I have one
I bought it on Amazon in November for only $0.01 with $4.96 for shipping. I have the white nexus and I love the contrast in the back of the black lines. In addition, also does not overlap my screen protector from XtremeGuard, this combination works perfectly protecting my phone. On Youtube are a good review of the case.
GhostNGoblins91 said:
The case does not add much bulk to the phone at all, IMO. A mini-review follows:
The style of this case is impeccable, in that it mostly stays out of the way to let the Nexus 5 shine. I have the white back N5, and the Atmosphere’s clear back shows off the vibrant color well. This is not a frosted back; it pretty much is completely clear, with strategically placed lines of rubber for the camera and also for reducing the slipperiness of the backend. The same matte gray rubber goes around the border and raises above the screen to provide a slight lay-on-table lip. Finally, the buttons are covered, but the buttons are still responsive, the lock button more so than the volume rocker.
The Google Nexus 5 is a very light phone. The lightest I’ve owned, actually. With the the Atmosphere on, it remains a slim, light phone. So while I want to protect this device, I also don’t want to weigh it down. I liked the Atmosphere case from from Poetic previously for the Nexus 4, and I was very happy with it, but I read about some durability problems. It remains to be seen if the Nexus 5 case will have better longevity, but I can say the rubber on this does feel sturdier than in the past reiteration. I am quite happy with this purchase. From this Nexus 5 version, I totally agree that this company does listen to feedback and keep making improvements. I am going to continue to support them through future devices.
Click to expand...
Click to collapse
Does the plastic back scratch easily? And does it mimic the curve of the original n5 back? Im using spigen neo hybrid, but the case basically made it a large iphone for me, extremely uncomfortable to hold because of the sharp corners
Sent from my Nexus 5 using xda app-developers app
honeybunchie said:
Does the plastic back scratch easily? And does it mimic the curve of the original n5 back? Im using spigen neo hybrid, but the case basically made it a large iphone for me, extremely uncomfortable to hold because of the sharp corners
Sent from my Nexus 5 using xda app-developers app
Click to expand...
Click to collapse
The back don't scratch so easily, I have it for a month and I have just a little scratches, I have the white version of the phone and the scratches are not perceptible in the use, and yes, it mimics the curve in the back and for me feels very comfortable to hold.
Here, is a good review of this case.
http://www.youtube.com/watch?v=3vbWUC-4vJ4
Excuse my poor english.
Jamith said:
The back don't scratch so easily, I have it for a month and I have just a little scratches, I have the white version of the phone and the scratches are not perceptible in the use, and yes, it mimics the curve in the back and for me feels very comfortable to hold.
Here, is a good review of this case.
http://www.youtube.com/watch?v=3vbWUC-4vJ4
Excuse my poor english.
Click to expand...
Click to collapse
Thank you, your english was clear and concise
Sent from my Nexus 5 using xda app-developers app

DIABLO Tough Rugged Dual Layer Protection Case Cover with Build in Stand for*

Finally a case with a kickstand.
http://pages.ebay.com/link/?nav=item.view&id=261651683480&alt=web
*Finally, a rugged case.
PowerLemons said:
*Finally, a rugged case.
Click to expand...
Click to collapse
Amen! Mine should arrive next week!
That is one ugly case and does not look comfortable to hold at all.
I had one for the note 3. It really wasn't that bad.
Crisisx1 said:
That is one ugly case and does not look comfortable to hold at all.
Click to expand...
Click to collapse
PowerLemons said:
*Finally, a rugged case.
Click to expand...
Click to collapse
If only they didn't have a stand, I would totally get it. I want a fully rugged case that doesn't feel tacky and about to fall apart like the TUDIA Dual.
Fugly case, it's a shame spigen refused to step up and produce a case.
disk0360 said:
Fugly case, it's a shame spigen refused to step up and produce a case.
Click to expand...
Click to collapse
Seriously.. I'm mad at them.
Or their ultra crystal screen protector. I love those.
Sent from my Nexus 4 using XDA Free mobile app
Ugly or not I'm looking for more protection and I have one of these on the way. I'll take some good pics for you guys when it comes. I got the red version.
Update: case came this morning. It's not as ugly as I thought, but it is a tad thick where the kickstand is. Good protection.. Better than my Ringke fusion and Tudia. I'm at work right now but will get some pics taken and posted later.
I agree. Who cares what it looks like: function > form. Let me know how it works out I may purchase one also.
Thanks
Ok here's the pics. I'm not happy with them but hopefully they will be good enough for you guys. I took them at work in a real hurry before my boss could appear and say "wtf are you doing?"
A few quick notes about the case:
-Good protection, higher edges around screen than my other cases.
-Power button feels pretty good but volume buttons are stiff and a bit mushy.
-Holes for the phone ports are of ample size.
-Case feels ok in my pocket but the thickness of the kickstand area IS noticeable even though I always have the screen side against my thigh.
-The kickstand is actually my first on any phone or tablet. It "locks" in the closed position with a snap. When trying to pull it out, it feels like it will break before it "snaps free" and folds out. Maybe it will, maybe it wont... I didn't buy the case for the kickstand anyway so I'm not worried about it.
Here's the pics.
Azlum said:
Ok here's the pics. I'm not happy with them but hopefully they will be good enough for you guys. I took them at work in a real hurry before my boss could appear and say "wtf are you doing?"
A few quick notes about the case:
-Good protection, higher edges around screen than my other cases.
-Power button feels pretty good but volume buttons are stiff and a bit mushy.
-Holes for the phone ports are of ample size.
-Case feels ok in my pocket but the thickness of the kickstand area IS noticeable even though I always have the screen side against my thigh.
-The kickstand is actually my first on any phone or tablet. It "locks" in the closed position with a snap. When trying to pull it out, it feels like it will break before it "snaps free" and folds out. Maybe it will, maybe it wont... I didn't buy the case for the kickstand anyway so I'm not worried about it.
Here's the pics.
Click to expand...
Click to collapse
Can you take a pic of the phone out of the case next to the case from the side, id like to see how thick it is compared to the phone.
Just ordered the white version, will come on standard shipping for around 7 days, no biggie while I wait for my TUDIA to arrive.
http://www.amazon.ca/JKase-DIABLO-R...&qid=1416026291&sr=8-4&keywords=jkase+oneplus
I had one of these on the RAZR i.
Not bad cases, can pop the rubber bit off and use just the hard shell.
Best hard cover Frosted Matte
Sended from china, 4 weeks wait, but very very good material !!
http://www.ebay.com/itm/Afan-Froste...t=US_Cell_Phone_PDA_Cases&hash=item27e8211eec
What are the differences between this two cases?
www.amazon.co.uk/gp/aw/d/B00P6TT6FK/ref=mp_s_a_1_1?qid=1416596545&sr=8-1&pi=AC_SY200_QL40
www.amazon.co.uk/gp/aw/d/B00P1T3HOQ/ref=mp_s_a_1_3?qid=1416596471&sr=8-3&pi=AC_SY200_QL40
akiscoolio said:
What are the differences between this two cases?
www.amazon.co.uk/gp/aw/d/B00P6TT6FK/ref=mp_s_a_1_1?qid=1416596545&sr=8-1&pi=AC_SY200_QL40
www.amazon.co.uk/gp/aw/d/B00P1T3HOQ/ref=mp_s_a_1_3?qid=1416596471&sr=8-3&pi=AC_SY200_QL40
Click to expand...
Click to collapse
Don't think cruzerlite has this case... Check their site.
Sent from my OnePlus One using Tapatalk VIP
i really hope other manufactures like spigen *cough* *Cough* support the opo, ive been using the nillkin snap one case and my opo fell from me a couple times and my bezel has taken the abuse : /
Threeoaks said:
i really hope other manufactures like spigen *cough* *Cough* support the opo, ive been using the nillkin snap one case and my opo fell from me a couple times and my bezel has taken the abuse : /
Click to expand...
Click to collapse
I don‘t think that manufacturers like spigen or otterbox will ever make cases for the opo they support devices that have more buyers like samsung or apple, anyway the most protective cases for opo are jkase diablo,diztronic ultra and tudia slimfit which do you prefer?
Awesome review.
tdamocles said:
I had one for the note 3. It really wasn't that bad.
Click to expand...
Click to collapse
that has got to be the best backhanded compliment i have ever heard. "wasn't that bad" I mean that is awesome. It's like saying, "well, the amputation went pretty well. He won't miss the limb at all."
I say this NOT sarcastically at all. I almost spit out what I was drinking because I was laughing so hard when I read this.

RhinoShield CrashGuard Bumper Case worth it?

I've heard about the RhinoShield CrashGuard Bumper Cases. Apparently, they can withstand 11ft drops on concrete. Has anyone had any experience with them in the past? Do they hold up? I am deathly afraid of cracking my S8 Plus but also find the idea of covering up my GORGEOUS phone with a case to be stupid. Thoughts?
RhinoShield CrashGuard Bumper Cases (S8 & S8 Plus):
https://rhinoshield.io/products/samsung-galaxy-s8-plus-bumper-case?variant=32457480513
https://rhinoshield.io/products/samsung-galaxy-s8-bumper-case?variant=32455065537
Drop test videos of RhinoShield CrashGuard
https://www.youtube.com/watch?v=ufrB_Emnlck
Anyone have more thoughts on this.
lmanlo said:
Anyone have more thoughts on this.
Click to expand...
Click to collapse
Mine just shipped today, hopefully it'll arrive by the weekend.
My 2¢
I like idea of a bumper frame, paired up with a clear or matte body skin on the backside.
Can I attest to the extremes of the protection, not even gonna try, but , from previous use on other devices, it should do the job as advertised.
They add a bit more width to the grip of the phone than one might imagine, but, I don't think that will be an issue with this phone, it has a relatively narrow grip as-is.
I'll post when it arrives & will decide whether it becomes my daily driver case (Other two are the OEM Clear Case & OEM Alcantara Case).
Sent from my dream2qltesq using XDA Labs
Waiting for it to come on to Amazon, still isn't on there:/
I have it, the power button is a little tough to push, but I like it a lot!! Skin looks great with it
^looks like the best bumper for us! Cool
I perorder mines (and one for me wife after she saw the videos she wanted it)
They said mines has been ship but no tracking number yet
I like the idea of not coving up your phone.
I went caseless back in the day with the plastic phones. But with the new all glass/metal phones its a bit different. The metal gets bend and the glass breaks.
YoungSkeezy said:
I have it, the power button is a little tough to push, but I like it a lot!! Skin looks great with it
Click to expand...
Click to collapse
That looks perfect, can't wait to get mine. Still no tracking number.
Looks good. Might get it with a skin as well.
Thanks.
Had one on my 6P. Dropped a number of times without any damage to the frame or screen. I will be getting one for my S8+ as well.
As for the power button being stiff...give it a week or so to break in. It gets easier to push.
My RhinoShield bumper arrived today & my 2¢:
Overall,it seems like a half-baked effort.
The sides do not cling to the phone well/gapping.
While I expected the case to add some width to the grip,they could have done a better job contouring the edges,the feel-in hand is akin to the S7 Edge,not good at all.
Buttons are extremely stiff to depress,should not be like this out of the box & require a "breaking-in" period.
For those that are planning on using a TGSP, the case may tighten up a bit,IDK,I don't use anything other than liquid sealers on my displays.
I may cut out the buttons & try using it like that. If it works out OK,I may use it on occasion,but,this case definitely falls in to the "occasional use only" category, I'll stick w/the OEM Samsung Clear hard case as a daily driver.
To say I'm disappointed would be an understatement,too bad Nillkin isn't making bumper cases anymore..........................
KOLIOSIS said:
My RhinoShield bumper arrived today & my my 2¢:
Overall,it seems like a half-baked effort.
The sides do not cling to the phone well/gapping.
While I expected the case to add some width to the grip,they could have done a better job contouring the edges,the feel-in hand is akin to the S7 Edge,not good at all.
Buttons are extremely stiff to depress,should not be like this out of the box & require a "breaking-in" period.
For those that are planning on using a TGSP,the case may tighten up a bit,IDK,I don't use anything other than liquid sealers on my displays.
I may cut out the buttons & try using it like that. If it works out OK,I may use it on occasion,but,this case definitely falls in to the "occasional use only" category,I'll stick w/the OEM Samsung Clear hard case as a daily driver.
To say I'm disappointed would be an understatement,too bad Nillkin isn't making bumper cases anymore..........................
Click to expand...
Click to collapse
I'm really disappointed to hear this. I just ordered mine Monday since no one else seems to be making one. I've become fond of a good bumper and a cool skin.
Sent from my SM-G955U using Tapatalk
dragunbayne said:
I'm really disappointed to hear this. I just ordered mine Monday since no one else seems to be making one. I've become fond of a good bumper and a cool skin.
Click to expand...
Click to collapse
Your experience may be better than mine,at least I hope so.
I'll be looking forward to your review.:good:
Sent from my Xiaomi Redmi Note 3 using XDA Labs
KOLIOSIS said:
My RhinoShield bumper arrived today & my 2¢:
Overall,it seems like a half-baked effort.
The sides do not cling to the phone well/gapping.
While I expected the case to add some width to the grip,they could have done a better job contouring the edges,the feel-in hand is akin to the S7 Edge,not good at all.
Buttons are extremely stiff to depress,should not be like this out of the box & require a "breaking-in" period.
For those that are planning on using a TGSP, the case may tighten up a bit,IDK,I don't use anything other than liquid sealers on my displays.
I may cut out the buttons & try using it like that. If it works out OK,I may use it on occasion,but,this case definitely falls in to the "occasional use only" category, I'll stick w/the OEM Samsung Clear hard case as a daily driver.
To say I'm disappointed would be an understatement,too bad Nillkin isn't making bumper cases anymore..........................
Click to expand...
Click to collapse
I kind of agree with you. I was super excited for mine to come in, however, i was fairly disappointed when it arrived.
Exact same issues with it as you.
i also got one the other day and the fit is pretty bad, the sides of the bumper dont fit the phone well and for $25 i would have expected a lot better. I ordered a cheap spigen case off amazon for $11 and it fits much better then this does.
Zer0_ said:
I kind of agree with you. I was super excited for mine to come in, however, i was fairly disappointed when it arrived.
Exact same issues with it as you.
Click to expand...
Click to collapse
KLLSWITCH said:
i also got one the other day and the fit is pretty bad, the sides of the bumper dont fit the phone well and for $25 i would have expected a lot better. I ordered a cheap spigen case off amazon for $11 and it fits much better then this does.
Click to expand...
Click to collapse
I've already boxed mine up,contacted EvoLutive Labs via e-mail & requested a refund.
I stated the reasons pretty much the same as we've experienced,hope to hear back in a day in a day or two.
I've been pleased w/their past efforts,but,this one is a fail. Perhaps those w/the S8 are having a better experience,probably not experiencing the loose fit as we are,chalk that up to the extra height of the S8+.
A tight fit is a challenge here,but,I feel it could have been better.
Forgot to post back.
I got my case a few days ago and been using it. It works for me so far.
The sides of the case does fit a little lose, but the phone doesnt slide around it. So all that is fine, its probably has something to do with the protection it offers.
The buttons are a bit on the hard side to push in.
The back have a nice lip so the camera and everything is lifted up. Same for the front.
The edges on the front are a bit exposed but it would have to be in order to use the phone. But it still seems like it would protect.
The phone feels great in this guard. there arent any sharp corners on the bumper.
I had a thin silicon case that had sharp corners on the ports and it would cut into my hand. This one doesnt do that which is great.
Also funny that my silicon case was suppose to be super thin but yet this bumper makes the phone seems alot thinner then the phone in the silicone case.
I got the black one and a blue on on the way for my wife. I doubt she will use it since i brought her a wallet case before she got her phone.
I'm still waiting on mine. I got an email with a tracking # finally, but it still says pre-shipment. So I guess it won't be showing up this week.
Sent from my SM-G955U using Tapatalk
dragunbayne said:
I'm still waiting on mine. I got an email with a tracking # finally, but it still says pre-shipment. So I guess it won't be showing up this week.
Sent from my SM-G955U using Tapatalk
Click to expand...
Click to collapse
Yea therr shipping is weird.
Normally they email ypu saying your order is fulfilled.
Then a day or 2 later you get a tracking number.
It will say pershipment. Then a day or 2 later it will get pick up.
And then about 2-3days for it to make it to you.
xile6 said:
Yea therr shipping is weird.
Normally they email ypu saying your order is fulfilled.
Then a day or 2 later you get a tracking number.
It will say pershipment. Then a day or 2 later it will get pick up.
And then about 2-3days for it to make it to you.
Click to expand...
Click to collapse
That seems about right so far.
Sent from my SM-G955U using Tapatalk

X-Level TPU Pixel 2 Case - My favorite

I love this case. I have the black one for the pixel 2 XL. This is a review of my wife's gold colored case. https://youtu.be/xVmcBE7ldbs
jrharvey said:
I love this case. I have the black one for the pixel 2 XL. This is a review of my wife's gold colored case.
Click to expand...
Click to collapse
Thanks for the video. I got one for the Pixel 2. It is the perfect case.
guapinoy said:
Thanks for the video. I got one for the Pixel 2. It is the perfect case.
Click to expand...
Click to collapse
Same here. Thanks for the recommendation!
Sent from my Pixel 2 using Tapatalk
jrharvey said:
I love this case. I have the black one for the pixel 2 XL. This is a review of my wife's gold colored case. https://youtu.be/xVmcBE7ldbs
Click to expand...
Click to collapse
Thank you for sharing this video! I was having the hardest time finding a thin case that still protected the camera and screen, but wasn't as bulky as the Spigen Liquid Crystal (SLC). For some reason, the new SLC's are thicker than in previous years - probably due to that new "air cushion" technology they are touting. All it does is make the phone way too bulky for my taste. I rarely drop my phones and just use a case to prevent scratches and bumps.
This is where the X-Level totally excels. I just got my matte black today, but also ordered a clear one from China (not sure if it's legit or a knock-off), but for only $5... not a big loss. I'll admit though, the X-level is still a bit slick to hold in the hand and I feel like the phone had more grip without a case. Plus, it made the power and volume buttons super mushy. I've never cared about how buttons felt until I put this case on. It made a huge difference, but not in a good way. The SLC case I had was super clicky and felt reassuring with each press. The X-Level doesn't click at all and sometimes makes it hard to tell if the button press was registered by the phone.
The squeeze gesture is easier to activate now too, so I may increase the sensitivity a bit as I have found it accidentally activating when I place it in my car cradle. Anyway, that's a long enough review for now. I've only had it for a day, but plan on keeping it unless something else amazing comes around.
I've also received the clear version and it has frosted edges on the sides of the case. I'm not sure I like that as I wanted the whole thing to be clear. This is because I really wanted to make my Pixel stand out from the crowd of black phones by using a skin, and I still wanted the protection of a case. So here it is, the clear case on top of the skin!
Like I said, I wish the sides were clear too, but otherwise, I love it.

Categories

Resources