Related
If you have purchased Screen Protectors off Ebay (or anywhere), post a link, a pic, and whether you like them or not.
I bought:
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=280665594632
-They are ok, I've had better.
-They have the three step approach (take 1 cover off, stick it down, take 2nd cover off.)
-The holes for speaker and sensor don't line up properly. I'll take a pic at some point
After a few hours use I can safely say the above screen protectors are terrible. you just have to run your fingernail across them and they scratch. I will be asking for a refund for sure.
The Savvies Screen protectors (ebay - 180660459805) are also terrible. The cuts for the home button, speaker and front camera dont match up.
i go one of these http://cgi.ebay.co.uk/6-x-LCD-SCREEN-PROTECTOR-SAMSUNG-I9100-GALAXY-S-II-/270726135062?pt=UK_MobilePhones_MobilePhonesCasesPouches&hash=item3f0888fd16
Seems pritty good apart from the camera hole is slightly off. Waxed it as well as it wasnt very slippy. No scratches and you can hardly tell its there apart from the 1 bubble
Stay away from the savvy one. It's a ****ty screen protector ! does not fit at all !
The Vikuiti ones (both the ADQC27 & DQC160) ordered from DISAGU via Amazon, do not fit properly I'm afraid.
The ones I purchased were just a fraction too long and so would have to overlap the bezel slightly, which would be unsightly (air pocket) and not make for a particularly secure fit.
Here's hoping SGP decide to make their Oleophobic ones for the i9100...
jenkinson6a said:
i go one of these http://cgi.ebay.co.uk/6-x-LCD-SCREE..._MobilePhonesCasesPouches&hash=item3f0888fd16
Seems pritty good apart from the camera hole is slightly off. Waxed it as well as it wasnt very slippy. No scratches and you can hardly tell its there apart from the 1 bubble
Click to expand...
Click to collapse
Got the same and can confirm the front camera hole is off but seems to be fine for a cheap protector until something better comes out.
Sent from my GT-I9100 using XDA App
anyone tried the xtremeguard screen protectors? Ive got one coming hopefully soon.
I have a Brando Ultra Clear here, but still waiting for my phone
Looks like the holes are in the proper place do, but can't judge exactly.
I bought this:
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=110676862121&ssPageName=STRK:MEWNX:IT
bad fit on FFC, means the protector has to be angled to line up with the home button... even if it was straight, theres a good 1-2mm gap around the protector and tbh i don't think i'd bother unless the protector was flush to the end or at least 0.5mm or less gap...
I had a HTC branded protector on my Hero and it was a perfect fit... anyone know if Samsung do the same? or did for the SGS etc??
Dickie
dickie2007 said:
I bought this:
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=110676862121&ssPageName=STRK:MEWNX:IT
bad fit on FFC, means the protector has to be angled to line up with the home button... even if it was straight, theres a good 1-2mm gap around the protector and tbh i don't think i'd bother unless the protector was flush to the end or at least 0.5mm or less gap...
I had a HTC branded protector on my Hero and it was a perfect fit... anyone know if Samsung do the same? or did for the SGS etc??
Dickie
Click to expand...
Click to collapse
I just tried these: http://www.amazon.com/5-Pack-EZGuardZ©-Samsung-Protectors-Packaging/dp/B004UBXH1E/ref=pd_rhf_p_t_1 and they didn't work well at all.
I left my review -- stay away and save your $1.99 for a cup of coffee!
Retrox89 said:
The Savvies Screen protectors (ebay - 180660459805) are also terrible. The cuts for the home button, speaker and front camera dont match up.
Click to expand...
Click to collapse
i agree mate is crap and cant take off this bubbles lol
I'm going to order a SGP one maybe from Korea or when out internationally they are highly regarded. The one that is oil resistant these cheap ones get too oily.
Sent from my GT-I9100 using XDA App
nikzDHD said:
I'm going to order a SGP one maybe from Korea or when out internationally they are highly regarded. The one that is oil resistant these cheap ones get too oily.
Click to expand...
Click to collapse
Fit is usually excellent with the SGP ones and then inclusion of a Camera lens protector is a nice addition.
However the Oleophobic qualities aren't especially obvious.
Another thing to note though --an email reply from SGP a couple of days ago indicated that they hadn't yet decided whether to offer an SGS2 accessories yet.
Assuming they do, given the popularity of this model, we may be in for a bit of a wait.
nightic said:
Fit is usually excellent with the SGP ones and then inclusion of a Camera lens protector is a nice addition.
However the Oleophobic qualities aren't especially obvious.
Another thing to note though --an email reply from SGP a couple of days ago indicated that they hadn't yet decided whether to offer an SGS2 accessories yet.
Assuming they do, given the popularity of this model, we may be in for a bit of a wait.
Click to expand...
Click to collapse
This site has SGP screen protectors for the Galaxy S 2. There are 3 to choose from, ultra crystal, ultra optic anti-fingerprints and oleophobic anti-fingerprints.
http://www.exportprive.com/samsung-screen-protectors-c-1164_1224_1232.html
Anyone had experience with any of these?
MaelstromXC said:
This site has SGP screen protectors for the Galaxy S 2. There are 3 to choose from, ultra crystal, ultra optic anti-fingerprints and oleophobic anti-fingerprints.
http://www.exportprive.com/samsung-screen-protectors-c-1164_1224_1232.html
Anyone had experience with any of these?
Click to expand...
Click to collapse
Google seems to suggest they are a legit site! Will try and order one let's see what happens!
nikzDHD said:
Google seems to suggest they are a legit site! Will try and order one let's see what happens!
Click to expand...
Click to collapse
Very odd, as I receive the following from the SGPstore a few days ago.
I guess SGP and the SGPstore aren't joined at the hip.
"Thank you for contacting SGPstore.com Customer Service Department.
Hi, my name is Lynn from SGPstore.com.
We are still deciding whether we are going to have products for Samsung Galaxy S II.
Please stay tuned with us and check our website."
ExportPrive are a legit site, in so far as they will send out the goods.
However, I had a bad experience with them a few months ago where they sent me the incorrect leather SGS1 case.
3 months later, despite promises, they still hadn't refunded.
I had to contact my CC provider to claim the funds back in the end.
nightic said:
Very odd, as I receive the following from the SGPstore a few days ago.
I gues SGP and the SGPstore aren't joined at the hip.
"Thank you for contacting SGPstore.com Customer Service Department.
Hi, my name is Lynn from SGPstore.com.
We are still deciding whether we are going to have products for Samsung Galaxy S II.
Please stay tuned with us and check our website."
ExportPrive are a legit site, in so far as they will send out the goods.
However, I had a bad experience with them a few months ago where they sent me the incorrect leather SGS1 case.
3 months later, despite promises, they still hadn't refunded.
I had to contact my CC provider to claim the funds back in the end.
Click to expand...
Click to collapse
They will probably have it soon, it's available on SGP Market (Korean SGP site).
99p protectors on ebay are a no go, they are absolutely bubbletastic!
nightic said:
Very odd, as I receive the following from the SGPstore a few days ago.
I guess SGP and the SGPstore aren't joined at the hip.
"Thank you for contacting SGPstore.com Customer Service Department.
Hi, my name is Lynn from SGPstore.com.
We are still deciding whether we are going to have products for Samsung Galaxy S II.
Please stay tuned with us and check our website."
ExportPrive are a legit site, in so far as they will send out the goods.
However, I had a bad experience with them a few months ago where they sent me the incorrect leather SGS1 case.
3 months later, despite promises, they still hadn't refunded.
I had to contact my CC provider to claim the funds back in the end.
Click to expand...
Click to collapse
Yeah, I've bought my SGS1 case + screen protector before from them. They did deliver the goods. So, unless the products I got are fakes, otherwise, they are legit.
The Skinomi screen protector is really cheap on Amazon right now:
http://www.amazon.com/Skinomi-TechS...International/dp/B0084F4HY8?tag=5336653508-20
It says normally it's $11.95. Right now it's $0.99
kingwp1 said:
The Skinomi screen protector is really cheap on Amazon right now:
http://www.amazon.com/Skinomi-TechSk...axy+s3+skinomi
It says normally it's $11.95. Right now it's $0.99
Click to expand...
Click to collapse
I just grabbed this thanks!
kingwp1 said:
The Skinomi screen protector is really cheap on Amazon right now:
http://www.amazon.com/Skinomi-TechSk...axy+s3+skinomi
It says normally it's $11.95. Right now it's $0.99
Click to expand...
Click to collapse
WORKING SKINOMI LINK -- and it's $.99 + $2.95 shipping, but still not bad, and it beats the $16 + $2.95 for the others with the back skin if you don't need it.
Just ordered one as well, since I'll have my phone before SGP has their new SGP Ultra Nano in stock and shipped
Thanks.. Just picked one up. Even with the $2.95 shipping... its a bargain!
kingwp1 said:
The Skinomi screen protector is really cheap on Amazon right now:
It says normally it's $11.95. Right now it's $0.99
Click to expand...
Click to collapse
zmore said:
WORKING SKINOMI LINK -- and it's $.99 + $2.95 shipping, but still not bad, and it beats the $16 + $2.95 for the others with the back skin if you don't need it.
Just ordered one as well, since I'll have my phone before SGP has their new SGP Ultra Nano in stock and shipped
Click to expand...
Click to collapse
Thanks for pointing that out. I guess I failed at copy/paste
OP is updated
Thanks op for this deal. Was about to order one from the regular site but you saved me around 6 or 7 bucks.
I wonder if they're blowing it out because of the curved screen and they fubar'd their first attempt at making a screen protector.
CZ Eddie said:
I wonder if they're blowing it out because of the curved screen and they fubar'd their first attempt at making a screen protector.
Click to expand...
Click to collapse
Me too, they did the 99 cent thing for the HTC One X early on and people gobbled them up. Overwhelming majority of reviews were negative and some concluded that the batch was defective which explained the price slash.
pdubcramp said:
Me too, they did the 99 cent thing for the HTC One X early on and people gobbled them up. Overwhelming majority of reviews were negative and some concluded that the batch was defective which explained the price slash.
Click to expand...
Click to collapse
Interesting. Well I guess there's 3-4 of us who will know for sure. I'd be happy to come back in here and let yall know if it's a screw up when mine comes in the mail.
I have this screen protector in my s3 and it sticks pretty well to the screen. My only complain is the orange peel effect
I ordered one of these. Hopefully the orange peel isn't too bad. I currently have the realook one installed but when I put my cruzerlite case on the edges start to come up.
I've always wondered if these types of protectors provide more protection than the hard/dry protectors
pdubcramp said:
Me too, they did the 99 cent thing for the HTC One X early on and people gobbled them up. Overwhelming majority of reviews were negative and some concluded that the batch was defective which explained the price slash.
Click to expand...
Click to collapse
Seems like you guys maybe right. I just got mine in today and the film was kind of stuck to the plastic bag it was in which resulted in some weird bubble imprints on the top of the screen protector. I'll try to get a picture up tomorrow. I'm letting it sit overnight to see if the weird markings on it come out.
I just applied mine last night and after a nights dry, it seems a bit on the tacky side. Its not as smooth as I would like, kinda hard to swipe. But I will give this a day or 2 more to fully dry and judge from there.
Wond3r said:
I've always wondered if these types of protectors provide more protection than the hard/dry protectors
Click to expand...
Click to collapse
They don't provide more or less, they seem to be on par.
The real differences are how long they last. Skimomi type repair themselves, can take hits that would usually damage the dry hard type, doesn't usually peel off if applied correctly. That's why most have a lifetime warranty. And the reason they come singular or in a two pack (mostly if you mess up installation, you have that spare), but not 3-5 packs, because you're gonna have to put another one on in a few weeks...
This has been my experience..
clockcycle said:
They don't provide more or less, they seem to be on par.
The real differences are how long they last. Skimomi type repair themselves, can take hits that would usually damage the dry hard type, doesn't usually peel off if applied correctly. That's why most have a lifetime warranty. And the reason they come singular or in a two pack (mostly if you mess up installation, you have that spare), but not 3-5 packs, because you're gonna have to put another one on in a few weeks...
This has been my experience..
Click to expand...
Click to collapse
does the skinomi come in pairs?
mariotme said:
does the skinomi come in pairs?
Click to expand...
Click to collapse
Just one. Wet application, though, so, hard to screw up.
Deal dead? Coming up as 6.95 in my browser now.
minister of etc said:
Deal dead? Coming up as 6.95 in my browser now.
Click to expand...
Click to collapse
Yes we missed it :banghead:
Sent from my GT-I9300 using Tapatalk 2
Just put mine on, the orange peal is much smoother than the original Zagg on my inspire, however the holes don't fit perfectly, they fit, just not as well as i would like.
Immediately after install any white on the screen looks very pixelated with a rainbow of colors, anyone else get this? Does it go away? Please tell me it goes away, if not i am going to rip it off right now.
Did anyone else buy these when they popped up on Amazon? I got mine last week and was wondering what the cut out was for. It's in the middle of either the top or bottom. Hard to tell, but every leaked picture I see shows the camera being off to the side? At least it looms like that to me...
ejkeebler said:
Did anyone else buy these when they popped up on Amazon? I got mine last week and was wondering what the cut out was for. It's in the middle of either the top or bottom. Hard to tell, but every leaked picture I see shows the camera being off to the side? At least it looms like that to me...
Click to expand...
Click to collapse
Probably just a placeholder image?
MultipleOutput said:
Probably just a placeholder image?
Click to expand...
Click to collapse
I actually have the protectors in my hand the cutout is definitely in the middle. All the leaked photos seem to have a camera in the middle.
http://www.amazon.com/SPIGEN-Google-Protector-Crystal-Premium/dp/tech-data/B00EV97UD6/ref=de_a_smtd
peikojose said:
http://www.amazon.com/SPIGEN-Google-Protector-Crystal-Premium/dp/tech-data/B00EV97UD6/ref=de_a_smtd
Click to expand...
Click to collapse
not sure what this means?
ejkeebler said:
Did anyone else buy these when they popped up on Amazon? I got mine last week and was wondering what the cut out was for. It's in the middle of either the top or bottom. Hard to tell, but every leaked picture I see shows the camera being off to the side? At least it looms like that to me...
Click to expand...
Click to collapse
i would think you'd seen the leaked video of the Nexus 5 from the french site. if not, feel free to do a quick google.
in the video, at about 43 seconds, it shows what appears to be the ear piece up top in the center. looks like it's a bit smaller than the eraser on a number 2 pencil.
A screen protector is really useful? This doesn't spoil user experience? No small bubbles between the protection and the screen?
Primokorn said:
A screen protector is really useful? This doesn't spoil user experience? No small bubbles between the protection and the screen?
Click to expand...
Click to collapse
I have a Spigen oleophobic one for my note2. Easy to apply and longlasting (6+ months). Highly recommended.
drdebian said:
I have a Spigen oleophobic one for my note2. Easy to apply and longlasting (6+ months). Highly recommended.
Click to expand...
Click to collapse
So waiting for a link of Spigen's Ultra Oleophobic protection
I live in the UK and found a listing on Amazon. Linky here. Not sure what I will get and when I will get it. But here's hoping it is a genuine Stenheil Product and I receive it close to my N5 :fingers-crossed:
sidhaarthm said:
I live in the UK and found a listing on Amazon. Linky here. Not sure what I will get and when I will get it. But here's hoping it is a genuine Stenheil Product and I receive it close to my N5 :fingers-crossed:
Click to expand...
Click to collapse
That looks like the same thing I bought
http://www.amazon.com/gp/product/B00EV97UD6/ref=oh_details_o01_s00_i00?ie=UTF8&psc=1
So expect to get 4, not 3 protectors and for them to have a hole in the top middle rather than over the camera where everything points to it being....I'm hopeful stenheil will send replacements if the camera does indeed end up on the left side (which every single indication I've seen is it will)....
Looks like they changed the listing since I ordered, but I received a 4-pack.
sidhaarthm said:
I live in the UK and found a listing on Amazon. Linky here. Not sure what I will get and when I will get it. But here's hoping it is a genuine Stenheil Product and I receive it close to my N5 :fingers-crossed:
Click to expand...
Click to collapse
IT's sold by Keep in Case which is the sub name for Spigen UK so it will definitely be genuine
Here's one of the protectors:
MLAM said:
IT's sold by Keep in Case which is the sub name for Spigen UK so it will definitely be genuine
Click to expand...
Click to collapse
Definitely not genuine. He's already shipped the product when the N5 isn't even out yet. He also change his listing and removed the Samsung Nexus 5 name (when we all clearly know the N5 is being made by LG). When I asked him what he has sent and whether it is a genuine Steinheil Product (as even their official website has no placeholder for the Ultra Crystal protector for N5) he simply replied he has sent a compatible one. What the hell is that about?! After 6-7 email exchanges (all logged by Amazon), I went to Amazon as the seller is now unwilling to give me a return postage label. I do not want this generic crap protector which doesn't even have a hole for the earpiece (as seen in the N5 leaked images).
I reported this seller to Amazon and am working through a claim. All I want is a refund, but not happy to pay return postage for a item which was misrepresented. Amazon even told me on the phone that this guy might be in breach of one or more of their policies. Anyway, just waiting for a refund now and will actually wait for the N5 to be released before ordering a SPIGEN protector from a legitimate store.
are just the crystal ones available? anyone have links to legit other ones?
Got one free with my Spigen hybrid case :thumbup:
>^.^< Sent From Meow HTC One
Are the spigen screen protector wet or dry application?
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app
JCreazy said:
Are the spigen screen protector wet or dry application?
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Its a dry application !!!!!
PSA:
Available for pre-order now. I, personally, will be making do with my Amazon protector until reviews are out, but they appear to believe they've knocked the issues with lifting edges.
https://www.zagg.com/us/en_us/invis...creen-protector/glass-curve-samsung-galaxy-s8
subyfan said:
PSA:
Available for pre-order now. I, personally, will be making do with my Amazon protector until reviews are out, but they appear to believe they've knocked the issues with lifting edges.
https://www.zagg.com/us/en_us/invis...rve&utm_campaign=20170418_gs8glasscurvelaunch
Click to expand...
Click to collapse
most expensive glass screen protector out there - at least so far - be interesting to see if it really works....
mocsab said:
most expensive glass screen protector out there - at least so far - be interesting to see if it really works....
Click to expand...
Click to collapse
If it works, with no edge-lift and no rainbow (especially compared to the selection available for the S7), it's worth every penny and they can have my money!
Does it have a warranty like the plastic covers?
ram8704 said:
Does it have a warranty like the plastic covers?
Click to expand...
Click to collapse
Indeed
Ordered the sphire one.. Lets see when it arrives, wondering how the concept will work
Amjad.AbdulGhani said:
Ordered the sphire one.. Lets see when it arrives, wondering how the concept will work
Click to expand...
Click to collapse
The Iphone Sapphire one got bad reviews and didn't seem to fare well on the youtube drop test. Let us know how it works for you.
Let just hope it is better than the iphone one.
This are for the iphone but could help.
https://www.youtube.com/watch?v=CuKfke6aQeI
We'll have to wait and see how the S8 zagg Sapphire one does.
lmanlo said:
The Iphone Sapphire one got bad reviews and didn't seem to fare well on the youtube drop test. Let us know how it works for you.
Let just hope it is better than the iphone one.
This are for the iphone but could help.
https://www.youtube.com/watch?v=CuKfke6aQeI
We'll have to wait and see how the S8 zagg Sapphire one does.
Click to expand...
Click to collapse
I'm not sure about the drop test, but i can tell you from experience with MULTIPLE replacements on two phones that, at least on the iPhone, the Sapphire glass was complete GARBAGE. I had mine replaced monthly through Zagg until finally i decided to take a loss and have the replace it with the standard Glass+ version. Surprisingly, the Glass+ was far superior. Dont buy into the sapphire hype. That thing was so riddled with scratches after a weeks use that it was hard to look at. As a matter of fact, i almost felt like looking at it was causing the scratches. They would be hard pressed to ever convince me that its a good product. If, and its a big IF this version adheres to the screen better than the other options, i might consider it, but again thats a big if.
You might want to check your local Best Buy, i noticed they had some stock of the Zagg Glass screen protectors at my local store in Savannah....
Total trash again, I just left T-Mobile and the guy tried to put on two of them. First one lifted on its own in the center , second one same thing clicking Center non-responsive joke don't waste your time guys
I'm SOOOOOO glad I found this thread. They're pushing it when I ordered the Mophie for the S8+. I didn't know that Mophie owns Zagg. I'm happy with the one I bought from Luvvitt and it was $9.
sanjsrik said:
I'm SOOOOOO glad I found this thread. They're pushing it when I ordered the Mophie for the S8+. I didn't know that Mophie owns Zagg. I'm happy with the one I bought from Luvvitt and it was $9.
Click to expand...
Click to collapse
The adhesive is only around the edges, and they lift up. Check into the Whitestone Curved Dome for S8/S8+
Howdy XDA,
As the new #Pixel4 was announced today we are already in production of Pixel 4 screen protectors. We hit it out of the park this time with full coverage, 3D, and full glue models.
As always, we have a special deal just for XDA where you can get 50% any Pixel 4 or Pixel 4 XL screen protector, just use coupon code Pixel4Sale.
Any thoughts or concerns, just let us know as always and we'll take care of you.
Thanks!
intelliARMOR
So the tempered glass you're making are going to only be like the picture above? I'm not a fan of tempered glass where is just sticky around the edges. Are you making regular ones too?
Sent from my [device_name] using XDA-Developers Legacy app
MRFERRARI23 said:
So the tempered glass you're making are going to only be like the picture above? I'm not a fan of tempered glass where is just sticky around the edges. Are you making regular ones too?
Sent from my [device_name] using XDA-Developers Legacy app
Click to expand...
Click to collapse
I believe they will have more than one model according to their post, they say: "full coverage, 3D, and full glue models."
Sorry for the confusion!
We only have one design. It is a 3D design with full adhesive. Thanks!
I'm intrigued but already ordered 5 different full coverage/full adhesive TG Pixel 4 protectors for less than the price of your 1. What's the advantage of this one over others to justify the $20 (apparently 50% off, too) price?
intelliARMOR said:
Sorry for the confusion!
We only have one design. It is a 3D design with full adhesive. Thanks!
Click to expand...
Click to collapse
Is it like what you did on the OG Pixel? If so I am sold. Should work great if it is the same. Just hope you don't cut out a few pixel at the top/bottom
sn0warmy said:
I'm intrigued but already ordered 5 different full coverage/full adhesive TG Pixel 4 protectors for less than the price of your 1. What's the advantage of this one over others to justify the $20 (apparently 50% off, too) price?
Click to expand...
Click to collapse
Based on prior models, we decided to go with a 3D mold for the edges of the protector, along with full adhesive. Having a 3D design bumps up pricing a bit. Once you see reviews coming in of our glass I think you will see the difference
springy said:
Is it like what you did on the OG Pixel? If so I am sold. Should work great if it is the same. Just hope you don't cut out a few pixel at the top/bottom
Click to expand...
Click to collapse
I think you'll be quite happy with the new design.
intelliARMOR said:
Based on prior models, we decided to go with a 3D mold for the edges of the protector, along with full adhesive. Having a 3D design bumps up pricing a bit. Once you see reviews coming in of our glass I think you will see the difference
Click to expand...
Click to collapse
I'm not sure what sort of difference the "3D mold for the edges" makes but screw it, I'll give it a shot. I'm already on a spending rampage, having ordered two Pixel 4's (for my wife and myself) and a bunch of other accessories already. :laugh:
sn0warmy said:
I'm not sure what sort of difference the "3D mold for the edges" makes but screw it, I'll give it a shot. I'm already on a spending rampage, having ordered two Pixel 4's (for my wife and myself) and a bunch of other accessories already. :laugh:
Click to expand...
Click to collapse
:laugh: - the 3D helps with edge adhesion and overall feel.
intelliARMOR said:
:laugh: - the 3D helps with edge adhesion and overall feel.
Click to expand...
Click to collapse
Oh, nice! Order placed. The good news is that I'll have plenty of other screen protectors to use until the intelliarmor one arrives in November.
Thanks!
Nice,
I loved your screen protectors for the Pixel 1, but your offerings for the Pixel 2 and 3 were sub par at best.
We'll see how these work out.
Will these ship in time to be received when pre ordered phones are delivered to people?
atlp99 said:
Nice,
I loved your screen protectors for the Pixel 1, but your offerings for the Pixel 2 and 3 were sub par at best.
We'll see how these work out.
Will these ship in time to be received when pre ordered phones are delivered to people?
Click to expand...
Click to collapse
Our Pixel 4 series will be one of the best yet. Yes, we're rushing to ship these out ahead of schedule. It's always a mad race to get them out with each new device launch
Good to hear.
Take your time, I'd rather have them be right than be available fast.
intelliARMOR said:
Our Pixel 4 series will be one of the best yet. Yes, we're rushing to ship these out ahead of schedule. It's always a mad race to get them out with each new device launch
Click to expand...
Click to collapse
I appreciate trying to deliver them ASAP but I really hope I get this in time for when I get my phone because I don't want to have to order from a million different places. If this is coming a lot later than my phone order, salt I'll have to cancel my order with you guys. I can't afford to not have a tempered glass on my phone and don't have extra funds to buy more than what I need. My phone arrives between this Thursday and Friday
Sent from my [device_name] using XDA-Developers Legacy app
@intelliARMOR, will this also be available in Germany/Europe? Probably from Amazon? How difficult is it to apply those 3D molded "glasses"? Are they glasses at all?
niko26 said:
@intelliARMOR, will this also be available in Germany/Europe? Probably from Amazon? How difficult is it to apply those 3D molded "glasses"? Are they glasses at all?
Click to expand...
Click to collapse
Howdy! We ship to the EU from the USA, however don't have plans to set this up Amazon in the EU. If there is a preferred retailer you'd like to buy from let us know and we can work to get setup with them. Thanks!
I just received mine in the mail today.
Did not find an install tray within the package, should one be included? I am holding off installing it without the install tray...
I also noticed the black border does not follow the pixel 4's screen 100%, so I am afraid the screen's edge will potentially be blocked.
Has anyone noticed the same issue?
https://www.gearbest.com/screen-protectors/pp_009233221122.html?wid=1433363#goodsDetail
I haven't even received mine yet and I'm already disappointed and planning to refuse delivery and attempt to get a full refund.
I already have 3 other screen protectors for my Pixel 4 that cost significantly less than this one and all but one came with an install tray for proper alignment. Also, IntelliARMOR skimped out and went with DHL for shipping, which is notoriously terrible and just a kick to the face, considering the increased cost of this protector over the competition.
For reference, the package is only traveling over 1 state (Nevada to Colorado) and DHL has had my package for 6 days with an estimated delivery that is still 3 days away. 9 days to ship a screen protector 2 states away?!? Give me a break. USPS, Fedex and UPS all managed to get my other protectors to me within 2-3 days.
@intelliARMOR - If you're going to charge 2-3x more for a protector than your competitors, the least you can do is use better than the worst shipping option possible. And no install tray? Come on.
I'm annoyed that I gave my money to intelliARMOR and will not give up until I get it back.
Also, for those interested, I currently have this full coverage protector installed and it's perfect. it comes with a TPU case that you can install first to use as the guide for the protector install. The case is nice enough that I actually chose to keep it installed rather than slapping my Spigen case on. Oh, and it only costs $8 and arrived within 24 hours of ordering.
https://www.amazon.com/gp/product/B07Y1YNGXN/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1