Related
I was trying out a kitkat kernel which was for our kitkat official but I stupidly used it on an aosp rom and then my phone would only boot into cwm recovery and then I factory reset and it now doesnt even turn on, it shows up on my laptop but im running windows 8 and i havent been able to use the unbrick methods. If anyone can help out it would be appreciated and if i need to send it to LG i know i have breached warranty so what should i say to them?
Thanks!
Can you get into download mode?
Make sure the phone is off. Hold volume up and down at the same time and plug you USB cable into your phone, your phone should go into download mode.
It wont turn on at all, its like all the partitions have been corrupted. I cant get into download mode and when i go into adb it say (fault device) so I think ill need to send it back to LG
riki126 said:
It wont turn on at all, its like all the partitions have been corrupted. I cant get into download mode and when i go into adb it say (fault device) so I think ill need to send it back to LG
Click to expand...
Click to collapse
That sounds about right.....that really sucks man ....if you cant get into download mode and I don't know of a jig built for this device butni have one for Samsung which throws it into download mode......for our device I know of none..........your beat bet is probably to send it to lg as it seems to be hardbricked
2SHAYNE
Yeah i agree, thanks
Hi what should i tell LG on the phone when i call them? should i tell them the truth or a lie? its completly bricked so they wouldnt have any traces of me rooting it would they?
JustinNL said:
Can you get into download mode?
Make sure the phone is off. Hold volume up and down at the same time and plug you USB cable into your phone, your phone should go into download mode.
Click to expand...
Click to collapse
shayneflashindaily said:
That sounds about right.....that really sucks man ....if you cant get into download mode and I don't know of a jig built for this device butni have one for Samsung which throws it into download mode......for our device I know of none..........your beat bet is probably to send it to lg as it seems to be hardbricked
2SHAYNE
Click to expand...
Click to collapse
Hi what should i tell LG on the phone when i call them? should i tell them the truth or a lie? its completly bricked so they wouldnt have any traces of me rooting it would they?
riki126 said:
Hi what should i tell LG on the phone when i call them? should i tell them the truth or a lie? its completly bricked so they wouldnt have any traces of me rooting it would they?
Click to expand...
Click to collapse
Sometimes if you try to charge the phone for a really long time (say 12 to 18 hrs at stretch) - the phone starts to turn on. Try that. and see if you can boot into download mode.
Also, when you give it to LG ... tell them that it is not turning on, thats it...
ok, i tried charging it but nothing happened so ill send it to them and just say that it wont turn on. Thanks!
Once they get it booted up and see the custom kernel and Rom they are most likely going to charge you full price for another phone and of course will not honor any warrantee. As long as you're ok with that go ahead and sent it back for a replacement. with that bein said, it's probably best you tell them the truth so you get accurate info from them ahead of time.
riki126 said:
I was trying out a kitkat kernel which was for our kitkat official but I stupidly used it on an aosp rom and then my phone would only boot into cwm recovery and then I factory reset and it now doesnt even turn on, it shows up on my laptop but im running windows 8 and i havent been able to use the unbrick methods. If anyone can help out it would be appreciated and if i need to send it to LG i know i have breached warranty so what should i say to them?
Thanks!
Click to expand...
Click to collapse
If it is not to late.. What did you mean by "it shows up on my laptop but im running windows 8 and i havent been able to use the unbrick methods."?
TheMighyLoki said:
If it is not to late.. What did you mean by "it shows up on my laptop but im running windows 8 and i havent been able to use the unbrick methods."?
Click to expand...
Click to collapse
It seems to show up in device manager when i connect it with my USB as QHSUSB_DLOAD
riki126 said:
It seems to show up in device manager when i connect it with my USB as QHSUSB_DLOAD
Click to expand...
Click to collapse
Sorry I was hoping to help but from a little looking, it is Hard Brick. Sometime its the smallest thing can change everything but not this time.
Sorry and good luck.
TheMighyLoki said:
Sorry I was hoping to help but from a little looking, it is Hard Brick. Sometime its the smallest thing can change everything but not this time.
Sorry and good luck.
Click to expand...
Click to collapse
No harm done haha. ill talk to LG and see what they can do for me. Thanks
I'm still stuck on download mode in QPST and I really need help ASAP! Im also hard bricked WHICH MEANS i can't turn on the phone or go into download mode. The usb driver is PORT with qualcomm hs-usb qdloader 9008. Is there any files, any fastboot, any instructions to save my phone before I return the phone on Friday? PLEASE THE LG G3 COMMUNITY I NEED YOUR HELP! I'M BEGGING YOU. IS THERE A WAY TO BOOT IT UP AND FIX THE PARTITIONS OF THE PHONE. I tried sd method= didn't work, tried lgflashtool=no IMEI, I BASICALLY TRIED EVERYTHING I CAN TO FIX THIS. Please, please help me D: . Also there is no jtag near NYC and I don't want to send my phone away. SO help me fix my partitions PLZ
Many options for you. Scattered all over to try out here. Ya gotta read. I recommend lg flash tool and stock files. It is in lgg3root.com
BAD ASS G3
Tried that but I have no IMEI is null due to failed partition and can't go into bootloader mode
Proof I'm not joking and this phone is trolling me
Edit: the file was too big
http://imgur.com/OnIukxU
xmagiicsx said:
Tried that but I have no IMEI is null due to failed partition and can't go into bootloader mode
Proof I'm not joking and this phone is trolling me
Edit: the file was too big
http://imgur.com/OnIukxU
Click to expand...
Click to collapse
Have you tried the other flash tool? I'm not sure if it will see your phone in the state it is in but if it does it may not require your imei. It can be a pain on win 8 64 but it might work for you http://forum.xda-developers.com/tmobile-lg-g3/general/firmware-t-mobile-lg-g3-t2818667
Is it normal for it to stop at 4% every time?
http://imgur.com/Ozn7ebB,1KqHpE2
http://imgur.com/Ozn7ebB,1KqHpE2#1
ThePagel said:
Have you tried the other flash tool? I'm not sure if it will see your phone in the state it is in but if it does it may not require your imei. It can be a pain on win 8 64 but it might work for you http://forum.xda-developers.com/tmobile-lg-g3/general/firmware-t-mobile-lg-g3-t2818667
Click to expand...
Click to collapse
Ummmm is this normal?
http://i.imgur.com/5FmgGKB.png
xmagiicsx said:
Ummmm is this normal?
http://i.imgur.com/5FmgGKB.png
Click to expand...
Click to collapse
Did that happen after you hit start?
ThePagel said:
Did that happen after you hit start?
Click to expand...
Click to collapse
No it as before I hit start, I have no IMEI and files to boot lol. I think I need it to complete the full installation. Imma take an hour break and wait till people come on suggest more ways
xmagiicsx said:
Tried that but I have no IMEI is null due to failed partition and can't go into bootloader mode
Proof I'm not joking and this phone is trolling me
Edit: the file was too big
http://imgur.com/OnIukxU
Click to expand...
Click to collapse
I know for a fact that this works with it FUBAR. Or call for replacement.
BAD ASS G3
The only way I can boot up this phone now is to use QPST but I have no instructions nor files(.hex, .qcn, or .mbn) to boot up this phone. I need these files to retrieve my imei and my modem so I CAN BOOT THIS DAMN PHONE
xmagiicsx said:
The only way I can boot up this phone now is to use QPST but I have no instructions nor files(.hex, .qcn, or .mbn) to boot up this phone. I need these files to retrieve my imei and my modem so I CAN BOOT THIS DAMN PHONE
Click to expand...
Click to collapse
If I replace it, I'm going to be afraid that they can access through my stuff because the last thing before the phone turn off was backing up my stuff on nandroid and that passcode can be bypassed :x
Good luck
BAD ASS G3
I know you said you can't get into download mode but maybe try this. I made this guide for when I owned an L9. It worked for my G2 as well. Of course use the kdz for our phone.
http://androidforums.com/optimus-l9-all-things-root/792689-guide-unbrick-manual-update-updated.html
---------- Post added at 03:21 PM ---------- Previous post was at 02:52 PM ----------
Lg makes it damn hard to completely brick a phone. I've seen so many people resurrect their phones from some of the dumbest sh!t you could do. There's a way just have to find it. If the phone's recognized by adb then someone could dump the boot, recovery, downloadmode partions and you could flash them back. You can try all the unbricking guides. There is a way to fix these 99% of the time I promise, just don't give up.
Swizzle82 said:
I know you said you can't get into download mode but maybe try this. I made this guide for when I owned an L9. It worked for my G2 as well. Of course use the kdz for our phone.
http://androidforums.com/optimus-l9-all-things-root/792689-guide-unbrick-manual-update-updated.html
---------- Post added at 03:21 PM ---------- Previous post was at 02:52 PM ----------
Lg makes it damn hard to completely brick a phone. I've seen so many people resurrect their phones from some of the dumbest sh!t you could do. There's a way just have to find it. If the phone's recognized by adb then someone could dump the boot, recovery, downloadmode partions and you could flash them back. You can try all the unbricking guides. There is a way to fix these 99% of the time I promise, just don't give up.
Click to expand...
Click to collapse
He tried that tool already. Well it was a modified version of uptest that doesn't require all of the extra steps. I was doing some reading and it looks like most lg phones are capable of adb turned off in charging mode so that's a fantastic idea you have about adb. I have the full kdz dump I can upload the second I get home.
I'm trying it again(D851) but the driver is not downloading and the mod is requiring for a lgmobileDL.dll but it is missing
Been like this for ten minutes
http://imgur.com/mqpf6j9,pxizZ6f#0
http://imgur.com/mqpf6j9,pxizZ6f#1
Edit: I uninstall and reinstall it 3 times but the download driver is still in blank
xmagiicsx said:
I'm trying it again(D851) but the driver is not downloading and the mod is requiring for a lgmobileDL.dll but it is missing
Been like this for ten minutes
http://imgur.com/mqpf6j9,pxizZ6f#0
http://imgur.com/mqpf6j9,pxizZ6f#1
Edit: I uninstall and reinstall it 3 times but the download driver is still in blank
Click to expand...
Click to collapse
Is that the official lg suit? I can almost say for a fact that won't work for you.
No its not but I need the .dll files for this phone
xmagiicsx said:
No its not but I need the .dll files for this phone
Click to expand...
Click to collapse
That should have been linked with the .tot I am assuming that is the tot flash youre doing (never done it myself). But I do have the. Tot file and DLL at home if you can't find it.
ThePagel said:
That should have been linked with the .tot I am assuming that is the tot flash youre doing (never done it myself). But I do have the. Tot file and DLL at home if you can't find it.
Click to expand...
Click to collapse
Is it possible for you to extract it from the .kdz and dump the .bin file here
xmagiicsx said:
I'm trying it again(D851) but the driver is not downloading and the mod is requiring for a lgmobileDL.dll but it is missing
Been like this for ten minutes
http://imgur.com/mqpf6j9,pxizZ6f#0
http://imgur.com/mqpf6j9,pxizZ6f#1
Edit: I uninstall and reinstall it 3 times but the download driver is still in blank
Click to expand...
Click to collapse
If you already installed the drivers before you don't need to install them from the support tool.
i rooted with purple drake and installed skydragon through team win...device shut off and is completely unresponsive..it gets warm when i try to run lg flash tool to get it back to stockit will not go into recovery...lg boot logo...fast boot...nor download mode..i took the phone apart and removed the motherboard to see if that would reset it and still no luck....any one have this issue and get it fixed without sending it bk to t-mobile?
kllm-jack said:
i rooted with purple drake and installed skydragon through team win...device shut off and is completely unresponsive..it gets warm when i try to run lg flash tool to get it back to stockit will not go into recovery...lg boot logo...fast boot...nor download mode..i took the phone apart and removed the motherboard to see if that would reset it and still no luck....any one have this issue and get it fixed without sending it bk to t-mobile?
Click to expand...
Click to collapse
SOL BRO . call and get replacement
BAD ASS G3
kllm-jack said:
i rooted with purple drake and installed skydragon through team win...device shut off and is completely unresponsive..it gets warm when i try to run lg flash tool to get it back to stockit will not go into recovery...lg boot logo...fast boot...nor download mode..i took the phone apart and removed the motherboard to see if that would reset it and still no luck....any one have this issue and get it fixed without sending it bk to t-mobile?
Click to expand...
Click to collapse
Only suggestion I can give I'd send it to Josh athe Mobile Tech videos and see if their JTag repair can revive it.
Send it back. All you did was install the upgrade and now it won't work.
BAD ASS G3
No he rooted and installed a custom rom. He didnt say he just installed the update. Then he tried to use the lg tool to restore back. Then he took it apart. He tampered with it software and hardware.
bkeaver said:
No he rooted and installed a custom rom. He didnt say he just installed the update. Then he tried to use the lg tool to restore back. Then he took it apart. He tampered with it software and hardware.
Click to expand...
Click to collapse
yea i rooted and all that...i had taken it apart but i did not mess with anything other than take the motherboard out so the connection to it and the internal battery attached to the back side of the screen was disconnected...i can j tag it myself i use to do it to xbox 360's with DZN mods....i got two new g3's coming,thanks to ups using an old tracking number.....i know theres a way to fix it...so me being the type of person i am,i'm adament about fixing it myself...its a electronic device therefore theres nothing someone elce cando that i cant...just need advised...the device is still useable...when i run lg flash the phone gets warm...not hot,but warm...like it would when charging....when i get the new phone tomorrow if i copy all its files on an sd and put the sd in the bricked device...how would i get the sdcard t put the files in the phone?
kllm-jack said:
yea i rooted and all that...i had taken it apart but i did not mess with anything other than take the motherboard out so the connection to it and the internal battery attached to the back side of the screen was disconnected...i can j tag it myself i use to do it to xbox 360's with DZN mods....i got two new g3's coming,thanks to ups using an old tracking number.....i know theres a way to fix it...so me being the type of person i am,i'm adament about fixing it myself...its a electronic device therefore theres nothing someone elce cando that i cant...just need advised...the device is still useable...when i run lg flash the phone gets warm...not hot,but warm...like it would when charging....when i get the new phone tomorrow if i copy all its files on an sd and put the sd in the bricked device...how would i get the sdcard t put the files in the phone?
Click to expand...
Click to collapse
trying setool and lgetools now if i can get the smart card drivers to install..fml...
ok so far ive gotten the driver to change from qhsusb_bulk to lge bluetooth transport (com3) and somehow i need to get into the settings and turn off mass storage....
kllm-jack said:
ok so far ive gotten the driver to change from qhsusb_bulk to lge bluetooth transport (com3) and somehow i need to get into the settings and turn off mass storage....
Click to expand...
Click to collapse
how'd you pull off getting the device to switch from qhusb_bulk? i'm trying to fix a friends phone and have this same issue
kllm-jack said:
ok so far ive gotten the driver to change from qhsusb_bulk to lge bluetooth transport (com3) and somehow i need to get into the settings and turn off mass storage....
Click to expand...
Click to collapse
I'm interested - what was the end result.
End result was he did a boo boo and instead of just playing dumb and getting a replacement he went about this the wrong way. If you don't know then read and learn if you over your head just replace the damn thing.
BAD ASS G3
I ended up giving up on it....but just download the LG drivers from lgetool type it in the search all forums bar to find it...install then go to device settings update driver pick one yourself and find lge electronics and connect,it will say error code 10 device won't power on...but if u disconnect and reconnect the device it should say connecting to LG blue tooth transport ( com3) and also install the LG virtual modem driver from lge tool.
While I was using SM-N910P 5.1.1 N910PVPU4COG5_Deodexed Rom, I changed SecContacts_Note_USA.apk file and it turned into Hard Brick.
It's a typical Hard Brick Hard Brick symptom in which nothing shows up on a screen even I pressed a power button and there is no vibration on the phone.
If I connect it to a computer, QHSUSB_BULK pops up.
After I setup a driver, it connects to Qualcomm HS-USB QDLoader 9008.
As I was searching for some information, I could find a solution for Note3 Hard Brick.
However,I do not have unbric.img file as it says on the solution.
I need unbric.img file.
Help Me
Can you get into download mode? Vol down+home+power. Seems odd that just changing that apk would brick your device, trust me I swap files in and out all the time but never had that issue.
Could be your battery is dead too
Rom issues
bcxv said:
While I was using SM-N910P 5.1.1 N910PVPU4COG5_Deodexed Rom, I changed SecContacts_Note_USA.apk file and it turned into Hard Brick.
It's a typical Hard Brick Hard Brick symptom in which nothing shows up on a screen even I pressed a power button and there is no vibration on the phone.
If I connect it to a computer, QHSUSB_BULK pops up.
After I setup a driver, it connects to Qualcomm HS-USB QDLoader 9008.
As I was searching for some information, I could find a solution for Note3 Hard Brick.
However,I do not have unbric.img file as it says on the solution.
I need unbric.img file.
Help Me
Click to expand...
Click to collapse
Just install the ROM again it wont change anything besides having to reinstall xposed if you use that, or audio mods like viper.
ianmb said:
Can you get into download mode? Vol down+home+power. Seems odd that just changing that apk would brick your device, trust me I swap files in and out all the time but never had that issue.
Could be your battery is dead too
Click to expand...
Click to collapse
Impossible
battery full
Iceburn1 said:
Just install the ROM again it wont change anything besides having to reinstall xposed if you use that, or audio mods like viper.
Click to expand...
Click to collapse
recovery mode, download mode Impossible
Ok, for one thing, changing that file will not hard brick your phone.
You either did something else to cause this issue or your battery is drained or kaput... It's not unheard of around here.
Just out of curiosity how do you know the battery is full if you can't get anything from the screen?
jhill110 said:
Ok, for one thing, changing that file will not hard brick your phone.
You either did something else to cause this issue or your battery is drained or kaput... It's not unheard of around here.
Just out of curiosity how do you know the battery is full if you can't get anything from the screen?
Click to expand...
Click to collapse
Charging the spare battery
bcxv said:
Charging the spare battery
Click to expand...
Click to collapse
Ahh...
How old is the phone?
jhill110 said:
Ok, for one thing, changing that file will not hard brick your phone.
You either did something else to cause this issue or your battery is drained or kaput... It's not unheard of around here.
Just out of curiosity how do you know the battery is full if you can't get anything from the screen?
Click to expand...
Click to collapse
I would definitely agree with this. That file alone wouldn't brick your phone. Trust me, as many different files I swap in and out on a daily basis I've never had that happen.
jhill110 said:
Ahh...
How old is the phone?
Click to expand...
Click to collapse
Production date April 2015
ianmb said:
I would definitely agree with this. That file alone wouldn't brick your phone. Trust me, as many different files I swap in and out on a daily basis I've never had that happen.
Click to expand...
Click to collapse
No charge to phone
Charged with a charger
Same problem here,any solutions? Throw it away?
Hard bricked Note 4
Same as above. No power, nothing. Get the Qualcomm when connected to pc. Any ideas?
sshea72 said:
Same as above. No power, nothing. Get the Qualcomm when connected to pc. Any ideas?
Click to expand...
Click to collapse
Check if this helps...
http://www.droidsavvy.com/unbrick-qualcomm-mobiles/
Having problems with mine too please help
I have a note 4 from sprint....i havent used it in years but i try to turn it on and it dose and restarts when ba k up aging on the sprint spark screen and keeps doing that i changed batteries and nothing....i try going to recovery mode but just flickers on and off where the android picture but cant do nothin.......i cant rememeber if i was trying to root it or unroot it bt i think i was tryin to root it when the problem started......i try to connect it to the computer to root it and den unroot it but the computer cant get the drivers to find it....so i 2ant to know what can i do
texasrejects91 said:
I have a note 4 from sprint....i havent used it in years but i try to turn it on and it dose and restarts when ba k up aging on the sprint spark screen and keeps doing that i changed batteries and nothing....i try going to recovery mode but just flickers on and off where the android picture but cant do nothin.......i cant rememeber if i was trying to root it or unroot it bt i think i was tryin to root it when the problem started......i try to connect it to the computer to root it and den unroot it but the computer cant get the drivers to find it....so i 2ant to know what can i do
Click to expand...
Click to collapse
If you are for sure that your drivers are installed. (Double check our reinstall ). Plus make sure your using a Samsung usb cord (musty be a good one)
But if all that stuff is correct. Then you might have a failing battery or phone. That's about all the help i can provide.
If you could at least get the phone booted into download mode and pc to reconize it. Then i would Odin a stock firmware.
I was factory resetting phone because it was having some problems with the camera, and that's when I accidentally dropped it, causing it to soft brick (I can turn it on, but it stays on the LG logo, and as I said, I can't enter download mode. However, I can access recovery mode). The problem is that I can't make the computer to recognize it (when I connect it, it doesn't appear any port option, only the universal serial bus controllers followed by an "unknown device". This happened before I bricked my phone.), which makes the situation even harder. Besides opening it and retrieving the mainboard, is there any other option? because I'm not 100% positive that I'm not going to be able to do that. PLEASE help!
*I'm not an expert with phones, so if there's an answer, try to say it on the most detailed and basic way, if possible
Dropping it wont cause a softbrick in your case theres two possiblitys either A u droped it and damaged internally or B when u dropped it the battery fell out while resetting and uve corupted a file but probly the first. Either way this guide is for the g2 but it may give u some insight. http://forum.xda-developers.com/showthread.php?t=2582142
---------- Post added at 06:38 PM ---------- Previous post was at 06:35 PM ----------
I didnt read very well in this case download ure rom on ure pc put ure sd card in ure pc put the rom on the sd card thr put it back in ure phonenand flash rom from there unless u got a backup on ure sd card just retore from recovery
---------- Post added at 06:42 PM ---------- Previous post was at 06:38 PM ----------
http://www.androidbrick.com/unbrick-recover-your-dead-lg-g3-g2-all-variants/
I would rather go for
-USB OTG cable
+
-USB FLASH driver with some rom on it
Didnt think of otg in most of my travels most people never even heard of it ill get u the site if u want it i vet em 75 cents apiece ive never tore one up always end up losing them
I forgot to mention, but when I dropped my phone, the battery DID came off, so the factory reset did get interrupted
If thats the case at worst lg flash tool back to stock using ure kzd or tot file but u should be able to do steps above
TheMadScientist420 said:
If thats the case at worst lg flash tool back to stock using ure kzd or tot file but u should be able to do steps above
Click to expand...
Click to collapse
I downloaded a stock firmware for lg g3 d855, stored it in my sd, and when I launched it in recovery mode it said "Failed to sysmapfile '/external_sd/download/<name of the rom>.zip".
Mono chromatic said:
I downloaded a stock firmware for lg g3 d855, stored it in my sd, and when I launched it in recovery mode it said "Failed to sysmapfile '/external_sd/download/<name of the rom>.zip".
Click to expand...
Click to collapse
You can't flash a KDZ file by recovery you need to do this with the LG tool
_SDroid said:
You can't flash a KDZ file by recovery you need to do this with the LG tool
Click to expand...
Click to collapse
But in order to use LG tool I need to have my phone connected to the PC, right? Here's my question: is there any way of fixing my phone without having to enter download mode, or in this case, connect it to the PC?
Mono chromatic said:
But in order to use LG tool I need to have my phone connected to the PC, right? Here's my question: is there any way of fixing my phone without having to enter download mode, or in this case, connect it to the PC?
Click to expand...
Click to collapse
You can try flashing a rom like cm12 by recovery
Yea just download any rom for ure device as soon as ure done make sure u make a backup just incase
_SDroid said:
You can try flashing a rom like cm12 by recovery
Click to expand...
Click to collapse
Now my phone won't even recognize the sd card... So I can't even try with recovery mode now
EDIT: It was a particular problem with my sd. I changed it, and managed to install the cm12 and IT WORKED! My phone is alive again!!!
Now u should try mking sure u got dl mode and recovery and all
And remeber if u find any post me or anyone else has posted here helpful remeber the thanks button
TheMadScientist420 said:
Now u should try mking sure u got dl mode and recovery and all
And remeber if u find any post me or anyone else has posted here helpful remeber the thanks button
Click to expand...
Click to collapse
I checked, and I only got recovery mode. Download mode is still an issue, and my pc won't recognize my phone
Just to be sure gou are tryin to enter dl mode corectly shutxown pull battery wait 5 or 10 sec put in bat hold only vol up then plug in usb on pc or phone side. If thats what ure doin just let me know ive seen a lot of peeps say no dl mode and theyre not doin it rite. Does your p. Aknowlege it in any form make the noise apon connection unknow decice
TheMadScientist420 said:
Just to be sure gou are tryin to enter dl mode corectly shutxown pull battery wait 5 or 10 sec put in bat hold only vol up then plug in usb on pc or phone side. If thats what ure doin just let me know ive seen a lot of peeps say no dl mode and theyre not doin it rite. Does your p. Aknowlege it in any form make the noise apon connection unknow decice
Click to expand...
Click to collapse
I did everything and nothing happened. I pulled the battery, put it back, hold the up button and then plug usb and again the lg logo came for a few seconds, followed by a charging battery animation. Once I plug in the usb, I hear the typical windows sound that you get when you connect a device, but it says that an unknown device has connected.
http://www.usoftsmartphone.com/t269796.html
TheMadScientist420 said:
http://www.usoftsmartphone.com/t269796.html
Click to expand...
Click to collapse
My problem is that my PC won't eecognize the phone, so when I execute a command in fastboot mode, the window stays in < waiting for device >, and I guess that stays until you connect your device.
Also, I'm having trouble understanding the concept of fastboot mode, is it the same as download mode, recovery mode, or it has nothing to do with that?
http://forum.xda-developers.com/sprint-lg-g3/general/guide-fix-hard-brick-recovery-guide-t3132359
Problem with this method is its not exactly easy but not bad i hard bricked my g2 and used this method but u will probly lose everything. This works but u have to follow to the t
I'll send you a flashable fix when i get home