has anyone figured out viper4android on 8.1?
i think we need to wait for the kernel sources to get released. I tried magisk + v4a magisk module + busybox + permissive mode - and still no dice
What Version of v4a did you try?
Yes, I have it working.
Install it as normal (2.5.0.5, ShadySquirrel) with magisk and reboot
Use a root file explorer (I use Solid) to move /magisk/viper4android/system/lib/ to /magisk/viper4android/vendor/lib. Copy this folder to /magisk/viper4android/system/vendor/lib (making folders as well)
Copy /system/lib/libstdc++.so to both of these folders
Reboot, viper won't complain about drivers now. Open Viper's settings and set it to compatibility mode, and disable selinux with the development settings. You have to disable selinux every reboot for it to keep working.
I'll repackage the module at some point but this is how it works
did anyone get this to work? i followed directions and its still propting me to install driver
slothdabski said:
did anyone get this to work? i followed directions and its still propting me to install driver
Click to expand...
Click to collapse
I'll give it a go... usually good with this stuff and I'll let you know!
---------- Post added at 12:33 PM ---------- Previous post was at 12:13 PM ----------
Following those steps I was able to at least get Viper to install the driver without the I/O error.. but after I reboot it still asks to install... still trying. I deleted the /magisk/viper4android/system/lib/ after moving everything to /magisk/viper4android/system/vendor/lib ... maybe that was wrong?
---------- Post added at 12:51 PM ---------- Previous post was at 12:33 PM ----------
Not working here.. just can't seem to get it configured properly. Was able to get rid of the I/O error but.. it's still not enabled no matter what I do with it...
---------- Post added at 01:19 PM ---------- Previous post was at 12:51 PM ----------
I'm relocking my device... nothing to do with the process I attempted here.. Just keep losing root randomly and other odd behaviors ... will wait for an updated Magisk and Viper. Cheers!
wasn't able to get past the drive i/o error
i wasn't able to get past v4a complaining about drivers. i even recursively chmod -R 755 everything in the /magisk/viper4android folder in a desperate attempt to sift out a permissions issue
can someone who got past the drivers issue run:
ls -l -R
in /magisk - and paste the screenshot or output here? i've been using adb shell with root btw to navigate around the filesystem.
thanks!
Quinny899 said:
Yes, I have it working.
Install it as normal (2.5.0.5, ShadySquirrel) with magisk and reboot
Use a root file explorer (I use Solid) to move /magisk/viper4android/system/lib/ to /magisk/viper4android/vendor/lib. Copy this folder to /magisk/viper4android/system/vendor/lib (making folders as well)
Copy /system/lib/libstdc++.so to both of these folders
Reboot, viper won't complain about drivers now. Open Viper's settings and set it to compatibility mode, and disable selinux with the development settings. You have to disable selinux every reboot for it to keep working.
I'll repackage the module at some point but this is how it works
Click to expand...
Click to collapse
Didn't seem to work for me on 8.1 DP2. Maybe i copied the files wrong? I copied the lib folder from /magisk/viper4android/system to /magisk/viper4android/vendor, so basically I just copied the lib folder to that location. Then i went to /system/lib and copied libstdc++.so to /magisk/viper4android/system/lib/ and /magisk/viper4android/vendor/lib. Switched to permissive mode and compatibility and still bugs me about drivers. Maybe I had to move the files and not copy? I really don't know and I'm going crazy here. Any idea what I should do?
joedajoester said:
Didn't seem to work for me on 8.1 DP2. Maybe i copied the files wrong? I copied the lib folder from /magisk/viper4android/system to /magisk/viper4android/vendor, so basically I just copied the lib folder to that location. Then i went to /system/lib and copied libstdc++.so to /magisk/viper4android/system/lib/ and /magisk/viper4android/vendor/lib. Switched to permissive mode and compatibility and still bugs me about drivers. Maybe I had to move the files and not copy? I really don't know and I'm going crazy here. Any idea what I should do?
Click to expand...
Click to collapse
I've attached the viper folder from my magisk directory. Replace yours with it and set any file's permissions (although that shouldn't be needed because magisk can handle it), reboot and see if that works:
https://drive.google.com/file/d/1oTTQbox31LvPzQCd2iDadNZJIXJDcdHp/view?usp=sharing
Note, the zip IS NOT flashable, IS NOT installable by magisk and SHOULD NOT be used on anything other than a Pixel 2 XL running the 8.1 preview.
Quinny899 said:
I've attached the viper folder from my magisk directory. Replace yours with it and set any file's permissions (although that shouldn't be needed because magisk can handle it), reboot and see if that works:
https://drive.google.com/file/d/1oTTQbox31LvPzQCd2iDadNZJIXJDcdHp/view?usp=sharing
Note, the zip IS NOT flashable, IS NOT installable by magisk and SHOULD NOT be used on anything other than a Pixel 2 XL running the 8.1 preview.
Click to expand...
Click to collapse
Worked for me. I'm running the 8.1 preview DP2.
Strangely enough, your install files contained extra files than mine. The audio_effects.xml file wasn't there for mine on any installation. How odd.
Thank you, though. I followed your instructions in an earlier post and it never once started to work.
I'm not using compatible mode either.
Ariac Konrel said:
Worked for me. I'm running the 8.1 preview DP2.
Strangely enough, your install files contained extra files than mine. The audio_effects.xml file wasn't there for mine on any installation. How odd.
Thank you, though. I followed your instructions in an earlier post and it never once started to work.
I'm not using compatible mode either.
Click to expand...
Click to collapse
I modified that file a while ago as a test, no idea if it makes a difference. It might do ¯\_(ツ)_/¯
Quinny899 said:
I've attached the viper folder from my magisk directory. Replace yours with it and set any file's permissions (although that shouldn't be needed because magisk can handle it), reboot and see if that works:
https://drive.google.com/file/d/1oTTQbox31LvPzQCd2iDadNZJIXJDcdHp/view?usp=sharing
Note, the zip IS NOT flashable, IS NOT installable by magisk and SHOULD NOT be used on anything other than a Pixel 2 XL running the 8.1 preview.
Click to expand...
Click to collapse
It works! Thank you so much. At first it made the viper app disappear so I started over. I installed the module from magisk, rebooted and then copied the files, set selinux to permissive and then I was in business. Seriously thank you so much. Without viper, my car won't play below 50hz and with viper I can make it play down to 30hz. I also made my own convolver file to add a high pass filter so that my speakers don't try to play below 30hz because then they distort at moderate volume. With the convolver, I am able to blast it. Makes it sound like a have a subwoofer and I am pushing my speakers almost to their limits, but boy do they sound great. Again, thank you!
joedajoester said:
It works! Thank you so much. At first it made the viper app disappear so I started over. I installed the module from magisk, rebooted and then copied the files, set selinux to permissive and then I was in business. Seriously thank you so much. Without viper, my car won't play below 50hz and with viper I can make it play down to 30hz. I also made my own convolver file to add a high pass filter so that my speakers don't try to play below 30hz because then they distort at moderate volume. With the convolver, I am able to blast it. Makes it sound like a have a subwoofer and I am pushing my speakers almost to their limits, but boy do they sound great. Again, thank you!
Click to expand...
Click to collapse
Oh yeah, I never install the viper app to the system because it doesn't load IR profiles correctly then. I always remove it from the module and install it as a user app, you can also use any themed version you want then, like the material one:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Quinny899 said:
I've attached the viper folder from my magisk directory. Replace yours with it and set any file's permissions (although that shouldn't be needed because magisk can handle it), reboot and see if that works:
https://drive.google.com/file/d/1oTTQbox31LvPzQCd2iDadNZJIXJDcdHp/view?usp=sharing
Note, the zip IS NOT flashable, IS NOT installable by magisk and SHOULD NOT be used on anything other than a Pixel 2 XL running the 8.1 preview.
Click to expand...
Click to collapse
It works for me for phone speaker but I can't get it to process Bluetooth.
Quinny899 said:
Oh yeah, I never install the viper app to the system because it doesn't load IR profiles correctly then. I always remove it from the module and install it as a user app, you can also use any themed version you want then, like the material one:
Click to expand...
Click to collapse
Would you mind sharing your convolver for the low pass filter and/or be able to combine it with sibilance correction in the 8khz range (or teach us how)? I'm trying to use Tracks master de-essed convolver. The problem I'm having is that in BSD_Geek Jake's IRS pack, *the convolvers aren't working*.
I extracted the IRS files directly to the Kernel folder in Viper4Android directory on sdcard. Viper is processing, and I know because if I toggle FET compressor, I hear the difference. However, choosing any convolver doesn't affect sound.
Quinny899 said:
I've attached the viper folder from my magisk directory. Replace yours with it and set any file's permissions (although that shouldn't be needed because magisk can handle it), reboot and see if that works:
https://drive.google.com/file/d/1oTTQbox31LvPzQCd2iDadNZJIXJDcdHp/view?usp=sharing
Note, the zip IS NOT flashable, IS NOT installable by magisk and SHOULD NOT be used on anything other than a Pixel 2 XL running the 8.1 preview.
Click to expand...
Click to collapse
it works! thanks alot Quinny899
davidisflash said:
Would you mind sharing your convolver for the low pass filter and/or be able to combine it with sibilance correction in the 8khz range (or teach us how)? I'm trying to use Tracks master de-essed convolver. The problem I'm having is that in BSD_Geek Jake's IRS pack, *the convolvers aren't working*.
I extracted the IRS files directly to the Kernel folder in Viper4Android directory on sdcard. Viper is processing, and I know because if I toggle FET compressor, I hear the difference. However, choosing any convolver doesn't affect sound.
Click to expand...
Click to collapse
Like I say, remove the app from the magisk module's system/priv-app, reboot and install it as you would any other APK. I don't know why module authors insist on having the APK in the system, it breaks things
Quinny899 said:
Like I say, remove the app from the magisk module's system/priv-app, reboot and install it as you would any other APK. I don't know why module authors insist on having the APK in the system, it breaks things
Click to expand...
Click to collapse
I didn't do anything with moving it from the system app and my convolver works. I have an irs response I made to slope off <30hz and it works. Not sure what is happening there :shrug:
My method still works on the 8.1 release it anyone is wondering
Working for me on 8.1.
Quinny899 said:
My method still works on the 8.1 release it anyone is wondering
Click to expand...
Click to collapse
Sorry, I'm having a little trouble understanding how to use your method with your zip file. Should I extract the contents and then place that folder in my data apps, reboot, then install the apk??
Related
See the original thread posted by britoso for details but thought you guys might like a fresh post here with details specific to our SGS2:
[APP][ROOT] Google Talk 1.3 with Video calling, Now wifi optional!
Initially installed talk1.3.nowifi.update-signed.zip via root explorer as per I2asta's post but the other party could not see my video in their chat. So, installed the suggested "GoogleServicesFramework.apk" to /system/app location (root explorer), rebooted and video is now working both ways!!
Update - A little guide as suggested by nasgilani!
Notes
- Root Explorer is a paid app, tried & tested! There are free alternatives out there but use at your own peril...
- I'll be using the updated gapps and the files therein for this guide. If you want to use an alternative version e.g. nowifi, download that one and use in the instructions instead.
- After performing this mod you will probably have to setup your Google Account again... and possibly reboot a second time to resolve any quirks.
Steps
1. Download the Full Google Apps from 20110503 which includes the updated GTalk
2. Extract the following files from the zip and place them somewhere easily accessible on your phone's SDcard:
/system/app/Talk.apk
/system/app/GoogleServicesFramework.apk
/system/lib/libtalk_jni.so
3. Open up Root Explorer and goto your extracted files
4. Long Click on Talk.apk and rename to Talk2.apk
5. Long Click on Talk2.apk and copy it, then navigate to /system/app
6. Press Mount R/W at the top right so it looks like:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Fig. 1 - Mount R/W to write files to this system folder
7. Click on the Paste button to paste it here
8. Long Click on Talk.apk and rename it to Talk.apk1
Fig. 2 - You should now have both talk2.apk and talk.apk1 as shown above
9. Long Click on Talk2.apk and select permissions
Fig. 3 - Permissions should be as above
10. Alter the permissions to the same as Fig. 3 above and OK it
11. Now navigate back to your extracted files and rename GoogleServicesFramework.apk to something like GoogleServicesFramework2.apk and then Copy it.
12. Navigate to system/app and then Paste it here
13. Rename the original GoogleServicesFramework.apk to GoogleServicesFramework.apk1
14. Now you can Rename the new GoogleServicesFramework2.apk to GoogleServicesFramework.apk
Fig. 4 - Now you should have 2 GoogleServicesFramework files
15. Long Click on the new GoogleServicesFramework.apk and alter the permissions to the same as shown in Fig. 3 above and then OK it
16. Navigate back to your extracted files again and Copy libtalk_jni.so
17. Then navigate to /system/lib and press Mount R/W
18. Paste libtalk_jni.so here
19. Again, set the Permissions of libtalk_jni.so as shown in Fig. 3
20. Reboot your phone...
21. Open up Talk, click on your own avatar and make sure Allow video and voice chats is enabled
22. Test out chat to make sure audio/video is working both ways...
23. Done!
A big thanks to britoso for posting this and I2asta for the root explorer intstructions!!
Thanks for posting it mate,
I would suggest if you can make a small guide on how and what you did to enable Gtalk video enabled on SGS2
Edit: Thanks mate you made this thread alive after the Guide..
ma10 said:
See the original thread posted by britoso for details but thought you guys might like a fresh post here with details specific to our SGS2:
http://forum.xda-developers.com/showthread.php?t=1056793
Initially installed talk1.3.nowifi.update-signed.zip via root explorer as per I2asta's post but the other party could not see my video in their chat. So, installed the suggested "GoogleServicesFramework.apk" to /system/app location (root explorer), rebooted and video is now working both ways!!
A big thanks to britoso for posting this!!
Click to expand...
Click to collapse
As suggested, updated the OP with a guide... any mistakes, let me know please!
Do I have to replace the original Talk.apk on system/app?
have you tested video chat with a pc client? How was the quality on 3g?
jonrwg said:
Do I have to replace the original Talk.apk on system/app?
Click to expand...
Click to collapse
yep, I renamed it in the above instructions to Talk.apk1 and left it there just in case you wanted to revert back to the original Talk.
Just a note, lost my Google sync after installing the GoogleServicesFramework.apk, and had to re-add my account in Settings to get my contacts back etc...
No issue obviously just wanted to prevent any "OMGWTFBBQ!! where have all my contacts gone?!?!?!?!" posts... lol
Dickie
ke3pup said:
have you tested video chat with a pc client? How was the quality on 3g?
Click to expand...
Click to collapse
yep, I've only tested with PC clients and if you installed the nowifi version then it works with 3G. The quick tests I've done over 3G shows it works rather well with only a slight lag, acceptable imo.
dickie2007 said:
Just a note, lost my Google sync after installing the GoogleServicesFramework.apk, and had to re-add my account in Settings to get my contacts back etc...
No issue obviously just wanted to prevent any "OMGWTFBBQ!! where have all my contacts gone?!?!?!?!" posts... lol
Dickie
Click to expand...
Click to collapse
I did add something in the Notes section but obviously it wasn't that clear... you think I should make it more clear?
Also, did you follow my instructions? If so, you think it's ok or do I need to change anything?
ma10 said:
I did add something in the Notes section but obviously it wasn't that clear... you think I should make it more clear?
Also, did you follow my instructions? If so, you think it's ok or do I need to change anything?
Click to expand...
Click to collapse
Sorry mate, i missed that part as i had already installed it and the only change i made was installing GoogleServicesFramework.apk as i found earlier today my mate could hear but not see me...
So that was my bad buddy, i'm sure anyone coming to this thread and reading properly will see what i missed, i just scanned it quick as i had already done most of the work...
One thing i've experienced, when switching to the Rear Camera, it cashes and I only get audio until I select Force Close... i tried this several times but on the 4th it fully crashed my phone, which took maybe 2mins to decide to reboot itself... no damage done tho...
Dickie
Thanks ma10 !! it works ! haha.. I just need to re-login my google account but no contact lost before login.
Edit: Try to change to rear cam and it work fine.
jonrwg said:
Thanks ma10 !! it works ! haha.. I just need to re-login my google account but no contact lost before login.
Edit: Try to change to rear cam and it work fine.
Click to expand...
Click to collapse
Interesting, which version did you use? normal or no wifi??
Dickie
dickie2007 said:
Interesting, which version did you use? normal or no wifi??
Dickie
Click to expand...
Click to collapse
Switching to rear view camera works for me too... I'm using the signed nowifi version. Which one are you using dickie?
I use the one OP post the link in Step 1. What version is that? lol
ma10 said:
Switching to rear view camera works for me too... I'm using the signed nowifi version. Which one are you using dickie?
Click to expand...
Click to collapse
I'm using the one from this thread:
http://forum.xda-developers.com/showthread.php?t=1056793
Dickie
@Dickie, I'm using talk1.3.nowifi.update-signed.zip and I guess that jonrwg is using the one inside gapps.zip if that is any help...
What is the different between talk1.3.nowifi.update-signed.zip and gapps.zip? Is it the same? Just curious.
Do we have this working with the front camera yet?
Does 'Talk2.apk' not need to be renamed to 'Talk.apk' between steps 9 and 10?
Raspster said:
Do we have this working with the front camera yet?
Click to expand...
Click to collapse
Is working for me. Front and rear cam.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
You flash this MOD at your own risk,
i take no responsibility for any mishaps.
Subscribe to update notifications and general chat by clicking the button below
PIXEL TELEGRAM CHANNEL
This here is my personal setup and thought i'd share. Usually i test extensively before releasing to public, but if you do find something detrimental to the usage of your device that is either Force Closing or simply not working, let me know and i will in turn inform whether that is something i will tend to.
WETA is a rom for Music geeks like me, though because we are still waiting on TWRP to become available i'd thought i'd make this MOD to flash in the meantime. Its main focus is Audio.
This mod installs the following...
V4A 2.5.0.5 or 2.3.4.0
Dolby Atmos
Sony Xperiaâ„¢ Z5 Premium audio system
Beatsâ„¢ libraries and effects
WETA Reboot app
How to install...
As of 9.0 moving forward, you will need to flash this mod using TWRP.
NOTE: There have been some issues with systemui crashing after install. This results in having to flash back to stock and in some cases having to wipe phone completely.
I advise running an un-encrypted file system at this stage, which may or may not help. Just be aware that things are basically experimental at these early stages.
1. Make sure you are on Stock firmware and have rooted device
2. Download mod zip
3. Install this app "Root Browser"
4. Extract the zip (click and hold, select extract) using Root Browser directly into Download folder. (you should have /sdcard/Download/WETA_*** as folder with files in it)
5. Go into Download/WETA_*** folder and select WETA-flash.sh
6. Tick "Execute script as root"
7. Then select the Execute button
8. It will say "Executing script"
9. Once complete you should have a popup box with no errrors.
10. Reboot device and mods should be installed....
Changes...
31st Oct
Fixed some things in audio_effects.conf
Added a new mod, 3minit battery to download page
#3 1st Nov
Modified build.props
Added System wide audio
#5 + #5b
Script modifications to be more universal for build.prop mod
- no longer replaces build.prop, now appends to file instead, keeping existing mod lines
V4ADA1 + V4ADA2
V4ADA1 - V4a 2.5.0.5
V4ADA2 - V4a 2.3.4.0
Both these versions have all audio mods omitted as to help with echoing while gaming.
Only V4A and Atmos present.
Fyi.. this can be flashed over the top of previous audio mods
12th Nov
WETA Audio 7 + 7b + V4ADA1_V5 + V4ADA2_V5
removed modification of audio_policy_config file
12th NOV
WETA Audio 8 + 8b + V4ADA1_V6 + V4ADA2_V6
More audio_policy_config tweaks for spotify
WETA Audio 9.0
WETA Audio 9.1
Fixed V4A convolver and profile permissions
– FYI this will wipe out your /sdcard/ViPER4Android folder
This version is an Aroma installer version. TWRP only.
Added Sony music player
Weta reboot option
BusyBox Install option
Weta audio remover
MOD Download Page
If you like my work, please consider buying this poor guy a craft beer for his efforts
WETA I still use ur ROM for 6p.. hoping u making one for the Pixel as well!! Especially with WETA Mods
Thanks for this but it did not work for me. I placed the zip in my sdcard/Download directory and extracted it with Root Browser. Selected the .sh file and executed the script as root but I get the following:
no such file or directory
mdecker79 said:
Thanks for this but it did not work for me. I placed the zip in my sdcard/Download directory and extracted it with Root Browser. Selected the .sh file and executed the script as root but I get the following:
no such file or directory
Click to expand...
Click to collapse
If your extracted folder was "WETA_Audio_Pixel", try renaming it to just "WETA_Audio". I had the same problem and that is how I got it to install. I am going to test it now. Thank you Mentalmuso. V4A is one of the main reasons why I root.
mattyv316 said:
If your extracted folder was "WETA_Audio_Pixel", try renaming it to just "WETA_Audio". I had the same problem and that is how I got it to install. I am going to test it now. Thank you Mentalmuso. V4A is one of the main reasons why I root.
Click to expand...
Click to collapse
Thank you very much. Yes it did execute and I'm currently rebooting. Sometimes I overlook the simple things thinking it's much more involved.
WETA Audio mod #2
Just made some changes to audio_effects.conf, there was some mistakes in there.
This can be installed over the top of the old mod.
Download Page
--->
Works great after the update. Thank you!
The link to AFH is broken. Gives a 404 error.
PS thanks for this lol. I was thinking about using my 6P for music but then this popped up since I have notifications on for your website.
curtdragon said:
The link to AFH is broken. Gives a 404 error.
PS thanks for this lol. I was thinking about using my 6P for music but then this popped up since I have notifications on for your website.
Click to expand...
Click to collapse
Fixed the link, thanks
? --->
I've added a 3minit battery mod also fyi.
? --->
varun.gid said:
WETA I still use ur ROM for 6p.. hoping u making one for the Pixel as well!! Especially with WETA Mods
Click to expand...
Click to collapse
Yeah I'm planning to, I just got tired of waiting for a custom recovery. This is actually a good way to test mods.
? --->
Mentalmuso said:
Yeah I'm planning to, I just got tired of waiting for a custom recovery. This is actually a good way to test mods.
--->
Click to expand...
Click to collapse
awesome! any chance of navbar height change mod and 5 quicktiles also..
varun.gid said:
awesome! any chance of navbar height change mod and 5 quicktiles also..
Click to expand...
Click to collapse
Yes, I'll work on those one by one, probably navbar height first, as I use that mod myself
? --->
I just tried this and it crashed my system ui. I did have the SystemUI Tuner enabled. This may cause issues. Now, I cannot use the phone. I am looking for a way todo the system image.
I just want to note to anyone else having issues. You must use the file app that was mentioned. I usually use Root Explorer but I guess the way Root Browser runs the script it does it correctly.
---------- Post added at 12:06 PM ---------- Previous post was at 12:06 PM ----------
SmokinCharger said:
I just tried this and it crashed my system ui. I did have the SystemUI Tuner enabled. This may cause issues. Now, I cannot use the phone. I am looking for a way todo the system image.
Click to expand...
Click to collapse
I have system tuner enabled. No issues here. Maybe it's something else or how the phone was rooted?
[MOD] - WETA Audio - [V4A][DolbyAtmos][+++]
SmokinCharger said:
I just tried this and it crashed my system ui. I did have the SystemUI Tuner enabled. This may cause issues. Now, I cannot use the phone. I am looking for a way todo the system image.
Click to expand...
Click to collapse
I'm interested in whether you have modded anything else on your phone. As the Audio mode don't touch systemui. Though I had a major systemui crash earlier but I was running 3minit mod and though it crapped out on me. Though I got the systemui crash after using Spotify via Bluetooth, it went to lockscreen then when I unlocked systemui crashed. So I'm wondering what mod caused it now
Have you been using Bluetooth or Spotify?
curtdragon said:
I just want to note to anyone else having issues. You must use the file app that was mentioned. I usually use Root Explorer but I guess the way Root Browser runs the script it does it correctly.
---------- Post added at 12:06 PM ---------- Previous post was at 12:06 PM ----------
I have system tuner enabled. No issues here. Maybe it's something else or how the phone was rooted?
Click to expand...
Click to collapse
I used Root Browser and it immediately crashed and rebooted after executing the script. As far as I know, the chainfire boot-to-root.img it the only way to root. No tweaks or mods yet. Everything was working great prior to this running this mod.
That is the nature of working with rooted phones. Sometimes things just happen. I just wanted people to know that it could mess up the system and be prepared to flash system to resolve.
---------- Post added at 10:27 AM ---------- Previous post was at 10:22 AM ----------
Mentalmuso said:
I'm interested in whether you have modded anything else on your phone. As the Audio mode don't touch systemui. Though I had a major systemui crash earlier but I was running 3minit mod and though it crapped out on me. Though I got the systemui crash after using Spotify via Bluetooth, it went to lockscreen then when I unlocked systemui crashed. So I'm wondering what mod caused it now
Have you been using Bluetooth or Spotify?
Click to expand...
Click to collapse
Purchased from Google Store for use on Verizon. It was unlocked and rooted of course. This was the first mod that I was applying. Yes, it was connected to Bluetooth to wireless speaker and Pandora playing.
[MOD] - WETA Audio - [V4A][DolbyAtmos][+++]
SmokinCharger said:
I used Root Browser and it immediately crashed and rebooted after executing the script. As far as I know, the chainfire boot-to-root.img it the only way to root. No tweaks or mods yet. Everything was working great prior to this running this mod.
That is the nature of working with rooted phones. Sometimes things just happen. I just wanted people to know that it could mess up the system and be prepared to flash system to resolve.
---------- Post added at 10:27 AM ---------- Previous post was at 10:22 AM ----------
Purchased from Google Store for use on Verizon. It was unlocked and rooted of course. This was the first mod that I was applying. Yes, it was connected to Bluetooth to wireless speaker and Pandora playing.
Click to expand...
Click to collapse
It crashed while running the script? That ain't right haha.
Sorry but what was it that crashed exactly? Did the phone go into a boot loop? Or did systemui crash
Mentalmuso said:
It crashed while running the script? That ain't right haha.
Sorry but what was it that crashed exactly? Did the phone go into a boot loop? Or did systemui crash
Click to expand...
Click to collapse
Almost immediately after I ran the script, the phone rebooted. Once it rebooted, I am getting a constant System UI crash and caannot do anything.
SmokinCharger said:
Almost immediately after I ran the script, the phone rebooted. Once it rebooted, I am getting a constant System UI crash and caannot do anything.
Click to expand...
Click to collapse
You'll have to fastboot flash system system.img. You won't lose any data. Do vendor as well to be safe. Just double checking here, but you downloaded the audio mod and not the 3minit battery mod right? WETA_Audio_2.zip not WETA_3M.zip? Thanks for being a crash guinea pig, I'll be looking into this later today.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
You flash this MOD at your own risk,
i take no responsibility for any mishaps.
Subscribe to update notifications and general chat by clicking the button below
PIXEL TELEGRAM CHANNEL
WETA is a rom for Music geeks like me, though because we are still waiting on TWRP to become available i'd thought i'd make these MODs to flash in the meantime.
How to install...
This method is redundant from V2.0 forward
1. Make sure you are on Stock firmware and have rooted device
2. Download mod zip
3. Install this app "Root Browser"
4. Extract the zip (click and hold, select extract) using Root Browser directly into Download folder. (you should have /sdcard/Download/(zip name) as folder with files in it)
5. Go into Download/(zip name) folder and select script for desired Emoji.
6. Tick "Execute script as root"
7. Then select the Execute button
8. It will say "Executing script"
9. Once complete you should have a popup box with no errrors.
10. Device will reboot automatically
V1
includes emoji from…
emoji-one (open source emoji)
IOS 10
Mozilla
Twitter
Windows 10
Facebook
LG G5
V2.0
This is now an Aroma installer, use TWRP to flash...
First Aroma version Installer
Added back to stock option
Added Samsung
updated ios to 10.2
updated Tweemoji to 2.2.1
updated emojione to 2.2.4
MOD Download Page
If you like my work, please consider buying this poor guy a craft beer for his efforts
--->
I don't get it. What does this mod do? I did Everything but nothing changed and it didn't Reboot Automaticly.
Gesendet von meinem Pixel XL mit Tapatalk
Mentalmuso said:
You flash this MOD at your own risk,
i take no responsibility for any mishaps.
Subscribe to update notifications and general chat by clicking the button below
PIXEL TELEGRAM CHANNEL
WETA is a rom for Music geeks like me, though because we are still waiting on TWRP to become available i'd thought i'd make these MODs to flash in the meantime.
How to install...
1. Make sure you are on Stock firmware and have rooted device
2. Download mod zip
3. Install this app "Root Browser"
4. Extract the zip (click and hold, select extract) using Root Browser directly into Download folder. (you should have /sdcard/Download/(zip name) as folder with files in it)
5. Go into Download/(zip name) folder and select script for desired Emoji.
6. Tick "Execute script as root"
7. Then select the Execute button
8. It will say "Executing script"
9. Once complete you should have a popup box with no errrors.
10. Device will reboot automatically
V1
includes emoji from…
emoji-one (open source emoji)
IOS 10
Mozilla
Twitter
Windows 10
Facebook
LG G5
MOD Download Page
If you like my work, please consider buying this poor guy a craft beer for his efforts
�� --->
Click to expand...
Click to collapse
Thanks for this, the iOS10 emojis work great. Can we only have one set installed at a time or is it possible to install multiple emoji packs?
airmaxx23 said:
Thanks for this, the iOS10 emojis work great. Can we only have one set installed at a time or is it possible to install multiple emoji packs?
Click to expand...
Click to collapse
Looking at the script and files, it looks to be the same font name, so no. It would take some trickery to have multiple emoji sets available on the same system.
raynan said:
Looking at the script and files, it looks to be the same font name, so no. It would take some trickery to have multiple emoji sets available on the same system.
Click to expand...
Click to collapse
Thanks, now I'm trying to find some pics showing the emojis from each pack.
No way! Thank You been looking for this everywhere.
EDIT: Any chance we can get iOS9 Emojis as well?
can we get a screenshot of what they each look like.?
I could but I'm not going to haha
Here though. Look through this
http://emojipedia.org
? --->
Edit
Is there a return to stock script for the emojis?
airmaxx23 said:
Is there a return to stock script for the emojis?
Click to expand...
Click to collapse
No. But thanks I'll make one. Didn't even think about these
WETA stock emoji installer
Takes you back to stock emoji.
MOD Download Page
--->
I tried running your script and it did not work. Well, it appeared to have worked, rebooted, but all the emoji's are the same (not iOS 10).
I'm contemplating on manually doing it, as I've replaced system files in the past.
Edit: Just moved the file manually and changed the permissions to RW-R-R and it worked like a charm. I don't think your script is moving the file correctly ?
Anyways, thanks for the font packs!
xocomaox said:
I tried running your script and it did not work. Well, it appeared to have worked, rebooted, but all the emoji's are the same (not iOS 10).
I'm contemplating on manually doing it, as I've replaced system files in the past.
Edit: Just moved the file manually and changed the permissions to RW-R-R and it worked like a charm. I don't think your script is moving the file correctly ?
Anyways, thanks for the font packs!
Click to expand...
Click to collapse
They've all worked fine for me.
xocomaox said:
I tried running your script and it did not work. Well, it appeared to have worked, rebooted, but all the emoji's are the same (not iOS 10).
I'm contemplating on manually doing it, as I've replaced system files in the past.
Edit: Just moved the file manually and changed the permissions to RW-R-R and it worked like a charm. I don't think your script is moving the file correctly ?
Anyways, thanks for the font packs!
Click to expand...
Click to collapse
You didn't follow the steps is all. You probably didn't use the app stated in op, or you didn't have the zip in your Download folder
Mentalmuso said:
You didn't follow the steps is all. You probably didn't use the app stated in op, or you didn't have the zip in your Download folder
Click to expand...
Click to collapse
I did both of these things, but okay.
I re-read your instructions and it appears that you're assuming there will be a folder with the name of the zip file under Downloads with the scripts in it. I extracted the zip contents into downloads and it put the scripts in downloads, and the sys folder in there as well. Perhaps this is where the confusion is? I see your script has the following path: /sdcard/Download/WETA_Pixel_emoji/sys/ios10/fonts/, where the bolded folder is the difference. When I extract your zip to the Downloads folder, it doesn't create this folder automatically (perhaps your version of Root Browser is set to do this).
I'm sure this will help anyone in a similar situation.
xocomaox said:
I did both of these things, but okay.
I re-read your instructions and it appears that you're assuming there will be a folder with the name of the zip file under Downloads with the scripts in it. I extracted the zip contents into downloads and it put the scripts in downloads, and the sys folder in there as well. Perhaps this is where the confusion is? I see your script has the following path: /sdcard/Download/WETA_Pixel_emoji/sys/ios10/fonts/, where the bolded folder is the difference. When I extract your zip to the Downloads folder, it doesn't create this folder automatically (perhaps your version of Root Browser is set to do this).
I'm sure this will help anyone in a similar situation.
Click to expand...
Click to collapse
Root browser is not root explorer. Root browser extracts to a folder of the same name as the zip. This is why I link the app also. All I'm trying to do is make it as simple as possible for people who don't even know what a script is. If root browser is not extracting to that named folder then I'm sorry I got it wrong. I don't want people misled by any of this. Please confirm what root app you are using
Use root browser peoples just like the OP stated.
Is this just http://forum.xda-developers.com/general/general/mod-ios10-profession-emojis-t3487038 but in an "installable" version? If so, would be good to credit the source.
Juzman said:
Is this just http://forum.xda-developers.com/general/general/mod-ios10-profession-emojis-t3487038 but in an "installable" version? If so, would be good to credit the source.
Click to expand...
Click to collapse
Um no. I got my font file from elsewhere, in fact ive had it since before his release date.
--->
Viper4android Audio Mod For Louder Clearer Sound
Here is my guide on how to install Viper4android on your Moto g5 for Nougat Roms Only!
For Oreo Roms install Viper4android via the magisk manager download module section
Screenshots
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Requirements
A rooted Moto g5 phone - I have tested this on Lineageos but I will assume it will work on a rooted stock rom too
Arise Sound System Thread
Arise Sound System Download
Instructions
Download the Arise Sound System
Flash it in TWRP
Aroma installer will start
Follow the Instructions of the Installer
SELinux Must be set to permissive - either use the installer to permanently set this to permissive or you can manually set it to permissive from within the Viper4android app
You only need to install Viper4android - However you are free to install any sound mods you like but I have not tested them
Next you need to disable any equaliser apps you currently have running
In lineageos turn off AudioFX from within the app
Make sure you disable any equalisers that are part of the music app you use as some 3rd party apps come with them so look in the apps settings and switch it off
Swipe right and select settings
Enable developer mode
Select Disable SELinux
Select ok
Note if you restart your phone you will have to set SELinux to permissive again for it to work unless you have set it to be permanently permissive
Open your audio player app settings and goto the equaliser section
See if there is an option to change from the apps equaliser to system equaliser
Eg for pi music player
Go to the app settings and change use pi equaliser to system equaliser
You will know its working if you open up Viper4android app
Swipe right
Select driver status
If the following shows it's working
NEON Enabled: Yes
Enabled: Yes
Status: Normal
Audio Format: Supported
Processing: Yes (when music is playing) No (When nothing is playing or not set for system equaliser or AudioFX is on)
Feel free to play around with the settings of Viper4android - after all everyone's headphones are different
Credits
Viper4android
zhuhang
ViPER520
A.R.I.S.E. Sound Systems
Official Viper4android thread
https://forum.xda-developers.com/showthread.php?t=2191223
TheFixItMan said:
Viper4android Audio Mod For Louder Clearer Sound
............................... Mod Edit: Removed bulk of OP quote ......................................
Official Viper4android thread
https://forum.xda-developers.com/showthread.php?t=2191223
Click to expand...
Click to collapse
Hello FixItMan,
earlier we exchanged in another thread on sound volume. Does this implementation give a sustainable implementation for increasing sound volume v.v. the program editing you suggested before? I certainly want to try and thanks already for input and work on this subject.
hly17_7 said:
Hello FixItMan,
earlier we exchanged in another thread on sound volume. Does this implementation give a sustainable implementation for increasing sound volume v.v. the program editing you suggested before? I certainly want to try and thanks already for input and work on this subject.
Click to expand...
Click to collapse
I didn't try the other app
Yes this improves the volume and is sustainable (albeit you may have have to disable SELinux again after restart)
Use the playback gain control to increase volume further than what I have in the provided profile
Gives total control over audio like bass frequency reverb stereo surround etc see screenshot for the app in first post
Hi bro, thanks for your great job. I try to install Viper but didn't work. After rebooting the device there is a constant popup for install the drivers! Can u help me? I'm not a noob
theflanker said:
Hi bro, thanks for your great job. I try to install Viper but didn't work. After rebooting the device there is a constant popup for install the drivers! Can u help me? I'm not a noobp
Click to expand...
Click to collapse
You need to copy the lib file to system/lib and set the correct permissions for the file as per instructions
Failure to do this correctly will result in that message
Edit
See screen shot section for how permissions of lib file should look
OK I will try it. Thanks :good:
Edit: nop nothing work:crying: The attached picture comes from a different root explorer, but the values are identical .
theflanker said:
Hi bro, thanks for your great job. I try to install Viper but didn't work. After rebooting the device there is a constant popup for install the drivers! Can u help me? I'm not a noob
Click to expand...
Click to collapse
Try this fix for nougat on stock it worked for me and fellow as instructed by OP above
https://forum.xda-developers.com/showpost.php?p=68702684&postcount=23760
---------- Post added at 10:38 AM ---------- Previous post was at 10:30 AM ----------
Cheers Fixitman ,it worked a treat after installing the nougat fix apk. Now the loud speaker is louder as it supposed to be.
Thanks man.
rophaq said:
Try this fix for nougat on stock it worked for me and fellow as instructed by OP above
https://forum.xda-developers.com/showpost.php?p=68702684&postcount=23760
Click to expand...
Click to collapse
Ok I will try all the solutions and report the results
thanks for help me
theflanker said:
OK I will try it. Thanks :good:
Edit: nop nothing work:crying: The attached picture comes from a different root explorer, but the values are identical .
Click to expand...
Click to collapse
Try copying it and setting permissions with total commander
Iv found with some other root browsers the settings don't stick as the app doesn't have the ability to mount the folder r/W or you didn't mount the lib folder r/w
Total commander mounts it for you and prompts you to remount the folder
Sorry missed out a step
To find the disable selinux setting
Open viper4android app
Swipe right
Select settings
Select enable developer mode
Now disable selinux will show
Iv added this step to first post in case you were wondering where that option is
Failure to disable selinux means audio driver will have status abnormal
Yeeeeee V4A now finally work... Thanks a lots guys. But... I used it on my Xperia Z2 and the effects it's very different! That's better than nothing
Sent from my Moto G (5) using XDA-Developers Legacy app
This must working with poweramp? because i do not see any change with or without, i disabled audio effects, but still nothing. Thanks
?
woozie.2007 said:
This must working with poweramp? because i do not see any change with or without, i disabled audio effects, but still nothing. Thanks
Click to expand...
Click to collapse
Yes it works with poweramp
Go into poweramp settings
Select audio
Advance tweaks
Disable direct volume control
This then turns off poweramps equaliser and let's the system take over
All apps settings in different music player will be different but all have the same premises - you're aiming to turn off the apps equaliser (just turning off isn't good enough as the app is still in control) and giving access back to the system
Here's a screenshot of that settings menu in poweramp
i disabled direct volume and eq, but no effects, the viper4android say no at processed and i tried to complet eliminate audio effects and no result
woozie.2007 said:
i disabled direct volume and eq, but no effects, the viper4android say no at processed and i tried to complet eliminate audio effects and no result
Click to expand...
Click to collapse
it works - i just tested it
also make sure in the poweramp equalizer screen select tone and volume (has dials for mono stereo x volume)
unselect equ tone and limit
also make sure if running for example lineageos that you have also turned off audiofx from the audiofx app
make sure you have disabled selinux
i have all of this modifications, but i am on stock rom rooted, i have selinux disabled, not works
woozie.2007 said:
i have all of this modifications, but i am on stock rom rooted, i have selinux disabled, not works
Click to expand...
Click to collapse
iv not tested it on stock rom
All I can say is - iv just tested it on my moto g5 running lineage os and it works
Try pi music player instead using the guide on the first post and see if that works - if it does theres a setting somewhere you are missing in poweramp or you have another equaliser that needs to be switched off - maybe a stock dsp equaliser - have a look in the phones settings menu under audio and see if it has the option to select a dsp/equaliser - if it does select it and select viper4android as your dsp/equaliser
i am wondering if works only with music player or all sounds in the phone, like ringing, call auditions...
i didnt have any equ, only audio effects which is disabled now
woozie.2007 said:
i am wondering if works only with music player or all sounds in the phone, like ringing, call auditions...
Click to expand...
Click to collapse
it works with all sounds - as long as the phones settings are set to use viper4android as its dsp/equaliser
The only problem you might experience is sometimes it takes 1 or 2secs for the effects to kick in for the first time - there for if you get a notification for the first time the start of that notification may sound low volume and suddenly rise up to the level its meant to be
This should only happen the first time the driver kicks in
thanks for your time, but i tried everything, i read first post for 20 times, i folowed all, still nothing, not works, i dont know what can i try
iBasso DX160 Portable Music Player - 5" HD+ | 1080×1920 | 13 hours of continuous play
iBasso DX160 Portable Music Player with 1080P Full Screen
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Main Features
*5-inch HD+ display with 1080×1920 pixels resolution and 445 PPI
* Android 8.1 Oreo
*Dual CS43198 chipset which is capable of DSD over PCM (DSD DoP) up to DSD256 and PCM 32/384kHz.
*125dB SNR for single-ended headphone while for the balanced headphone the SNR ranges to 130dB
*2GB LPDDDR3 RAM and 32GB Internal Storage.
*dimensions 113 x 69 x 15mm and weighs 178g.
*200 mAh battery supporting Quick Charge 3.0 support.
*13 hours of continuous playback upon the single full charge.
Click to expand...
Click to collapse
Official Page: iBasso DX160
Stay tuned for more news and information.
2gb ram for an Android device?
Twitch007 said:
2gb ram for an Android device?
Click to expand...
Click to collapse
Yes, its Android "experience" is not as fast, AnTuTu 3D benchmark scores on par with DX200/DX220 (it's a Rockchip SOC after all), though Mango app GUI is very responsive. But the sound is something else!!!
vectron said:
Yes, its Android "experience" is not as fast, AnTuTu 3D benchmark scores on par with DX200/DX220 (it's a Rockchip SOC after all), though Mango app GUI is very responsive. But the sound is something else!!!
Click to expand...
Click to collapse
I guess this thing is more head-fi than xda.
Twitch007 said:
I guess this thing is more head-fi than xda.
Click to expand...
Click to collapse
When it comes to sound, yes. But then, Lurker always cooks a fw fix for iBasso to optimize OS and to add Google Play store, and that is pure xda
Please I need help.
I have installed lurkers firmware, installed magisk, got root access , installed solid explorer, installed busy box, installed selinux permissive then i have installed audio modification library plus audio compatibility patch and after all that viper4android and James dsp. I think I did everything right. My problem is that when I activate the sound mods sound comes out distorted, noise, scratchy.
The drivers are installed properly and processes properly. I think I basso has modified system audio path for bit perfect and thats why all this problem.
Or I don't know why. Can someone help me or knows anyone how can I fix it. Thx
Can someone please help me flash magisk and obtain root so that i could use some magisk modules.
Is it safe to flash the magisk zip file using recovery?
Thanks in advance.
Yes of course. Download lurkers firmware
https://github.com/Lurker00/DX160-Firmware-Add-on , and magisk is already pre installed, after installing lurkers firmware you need only to download magisk manager apk and that's it.
Pumped. said:
Yes of course. Download lurkers firmware
https://github.com/Lurker00/DX160-Firmware-Add-on , and magisk is already pre installed, after installing lurkers firmware you need only to download magisk manager apk and that's it.
Click to expand...
Click to collapse
I was hoping for a way without lurker's add-on... can flashing the magisk zip from the recovery of the DX160 work?
Yes and no. via adb fastboot or adb sideload it doesn't let's you Flash magisk or any other costume recovery. You need to disable verity, remount system, unlock the device and then yes I believe you can flash everything you want. Or use the RKdevtool or android tool to flash or patch system. I'm not sure. Lurkers firmware is the easiest way to root the device. If after installing lurkers firmware and installing magisk manager apk does not lets you install modules then you need to Download exactly the same stock firmware you already have installed in your device , extract stock firmware on Pc then select boot.img and copy boot.img into device internal storage.
After that you need to open magisk, type update, select and patch file , then choose the stock boot.img you saved in your device type and then reboot your device. After this process you will be able to install all magisk modules without issues and it will work perfectly.
Do not update and flash magisk_patched.img. It will cause problems - bootloop, etc.
If want to try some commands and try to flash
Then turn on the player anable usb debugging, OEM unlocking then will pop a window on the top and must select transfer files or transfer photos.
After that don't turn your player off. Open command window and type or try some commands
Examples :
adb devices
adb root
adb remount
adb shell mount -o rw,remount /system
adb shell mount -o rw,remount rootfs /
adb push your path/your file.img /data
adb install -r your path/your file.apk
adb shell 0<supersu.cmds for example
adb reboot.
Etc.
Trying unlocking device
I tried this commands but without positive results
adb devices
fastboot devices
fastboot flashing unlock
fastboot oem unlock
fastboot oem unlock_accept
fastboot getvar unlocked
Fastboot reboot
If you want to try more commands and experiment
then visit
http://opensource.rock-chips.com/wiki_Fastboot
This was one way to remount system, push and install
But the player must be on and select transfer files on top of player.
Other solution is to use RKdevtool or android tool.
If you need the disable verity folder and make it easier for you then go and download it Form fidelizer ibasso dx160 website.
I will not be able to try and make viper4android or James dsp work because I will sell this player. I don't like anymore ibasso players.
I will work on the fiio m11.
Best player ever!
Pumped. said:
Please I need help.
I have installed lurkers firmware, installed magisk, got root access , installed solid explorer, installed busy box, installed selinux permissive then i have installed audio modification library plus audio compatibility patch and after all that viper4android and James dsp. I think I did everything right. My problem is that when I activate the sound mods sound comes out distorted, noise, scratchy.
The drivers are installed properly and processes properly. I think I basso has modified system audio path for bit perfect and thats why all this problem.
Or I don't know why. Can someone help me or knows anyone how can I fix it. Thx
Click to expand...
Click to collapse
Did you made viper4android works for dx160? Is equalizer working? I want to try but dont know how to start, manual rooting or with lurkes firmwire. Any one have viper4android on dx160?
ViPER4Android, JamesDSP and Dolby Digital Plus.
I see a few of you mentioning these types of DSPs. I myself have just gotten this device, and because im using it as a streaming bluetooth device (DSP is important) i was about to send it back as these werent apparently going to be simple to implement. Though... after some persistence i have a result that works well with Lurkers fiirmware mod.
Flashing the following Magisk module will indeed give you working V4a/JamesDSP/DolbyDDP , though afterward the Mango player (from within android) will not work, so i debloated it within the module. Though access to Mango player can obviously be achieved by booting into Mango OS. So i dont see this as an issue. Or.. disable my module and reboot.
To access the module HERE
--->