Develop Bugs

[DEPRECATED][GUIDE][ROOT] Smartwatch 3 KNX01V

I removed download link due to this method not working on lollipop.
This guide is deprecated, please use TWRP Recovery from this thread to install root
DISCLAMER and WARNING: I'm not responsible for bricked devices, dead SD cards, thermonuclear war, or the current economic crisis. Please do some research if you have any concerns about this app.
Click to expand...
Click to collapse
You have been warned!
Links:
Sony PC Companion
Download link removed while I will test for compatibility with 5.x, md5 summ: e2c34b07faa415a6cbb95943649c7eba
Step 1:
Code:
[URL="source.android.com/source/building-devices.html#unlocking-the-bootloader"]Unlocked bootloader[/URL]
1. Enable adb debug
2. adb reboot bootloader
3. fastboot oem unlock (twice if requested)
4. fastboot format cache
5. fastboot format userdata
6. fastboot getvar all (and verify that it is)
7. fastboot reboot
Step 2:
Code:
Updated to the latest KNX01V
[URL="http://www.sonymobile.com/us/tools/pc-companion/"]Install Sony PC Companion[/URL] and use Supports Zone -> Accessories software update -> Smartwatch 3
Step 3:
Code:
Have Flashboot (Sony s1 flash) drivers installed just in case (Install Sony PC Companion and do update as indicated in previous step)
Step 4:
Code:
[COLOR="red"]BOOT [/COLOR][COLOR="Red"](DO NOT EVER FLASH IT!!!)[/COLOR] rooting boot.img
1. Download rooting kernel image (SWR50-rootboot.img)
2. Reboot into bootloader (adb reboot bootloader)
3. fastboot boot SWR50-rootboot.img
4. Wait till device reboots or sits in black screen for a while (1 min+ then reboot it by holding power 10+sec)
Step 5:
Code:
Verify by:
1. adb shell
2. su
3. you should see [email protected]:/ #
Step 6:
Code:
1. Let me know!
2. Use it, dive into GPS investigation or customizations, etc.....
Special thanks:
1. Justin Case for LG G Watch rooting method using LGGW-rootboot.img
2. osm0sis for Android Image Kitchen
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

reserved

How it works:
1. Each boot.img packs zImage (real kernel) and ramdisk (special files for kernel use)
2. This one has all modifications from LGGW rootboot by Justin Case:
a. Adds su binary, superuser.sh install script, modified install-recovery.sh and additional step into init.rc file to invoke superuser.sh install script. Also modifications to mount system as rw and some disabled security.
3. So basically it mount system as rw and does following (cut from superuser.sh install script):
Code:
#!/system/bin/sh
/system/bin/mount -o remount,rw /system
/system/bin/sleep 2
/system/bin/cat /sbin/su > /system/xbin/su
/system/bin/cat /sbin/su > /system/xbin/daemonsu
/system/bin/cat /sbin/install-recovery.sh > /system/etc/install-recovery.sh
/system/bin/chown 0.0 /system/xbin/su
/system/bin/chown 0.0 /system/xbin/daemonsu
/system/bin/chown 0.0 /system/etc/install-recovery.sh
/system/bin/chmod 06755 /system/xbin/su
/system/bin/chmod 06755 /system/xbin/daemonsu
/system/bin/chmod 755 /system/etc/install-recovery.sh
/system/bin/sync
/system/bin/sleep 3
/system/bin/reboot

I have dumped the rom from my debug/test version and was wondering if you were able to give me a guide on how i could try and flash it with a retail version? I presume this root guide probably won't work for me

Well, if hardware and partitions are the same - I do not see why it will not work. However, it will not help to flash.
I might try to compile twrp, but will have to carefully read its docs first.

thanks @XorZone confirmed as working and a nice easy process too (I was already unlocked).
Out of curiosity, modded LGGW rootboot or just renamed?

iBuzman said:
thanks @XorZone confirmed as working and a nice easy process too (I was already unlocked).
Out of curiosity, modded LGGW rootboot or just renamed?
Click to expand...
Click to collapse
Thanks for letting me know!
I reverse engineered changes in LGGW by unpacking and comparing ramdisks from both rootboot and original lg kernel and then applied the same changes to our kernel extracted from PC Companion files.

great thinking and good job ?
btw, that pic confirmed su access to watch over bluetooth debug connection ?

really great tutorial. I am planning to buy this watch, but I think currently there is NO app that requires Root. so I wonder how can we get benefit of this ?

Kurotsuchi said:
really great tutorial. I am planning to buy this watch, but I think currently there is NO app that requires Root. so I wonder how can we get benefit of this ?
Click to expand...
Click to collapse
There is at least Wear Control app: https://play.google.com/store/apps/details?id=octathorp.wearcontrol
I plan to code density changer that will require access to adb, so either from rooted phone or rooted wear.

Kurotsuchi said:
really great tutorial. I am planning to buy this watch, but I think currently there is NO app that requires Root. so I wonder how can we get benefit of this ?
Click to expand...
Click to collapse
how to benefit?
root apps of course!!
(sry for bad pic, unlocked bootloader z3 in low light [emoji12]

XorZone said:
There is at least Wear Control app: https://play.google.com/store/apps/details?id=octathorp.wearcontrol
I plan to code density changer that will require access to adb, so either from rooted phone or rooted wear.
Click to expand...
Click to collapse
that's awesome man! will purchase mine next week, can't wait to root it. thanks for the answer.

Thanks for the root, XorZone. For anyone wondering, here's the dmesg of the watch
A few small observations from digging:
The main chipset seems to be the BCM23550
The CPU has 4 cores, 2 are disabled in software. Should be easy enough to reenable if you please
It definitely has WiFi hardware, but the firmware is currently missing from the image. If you mange to get a hold of compatible firmware and nvram, it should be simple enough to get WiFi up and running
The WiFi firmware message mentions a "43341". Which is odd because apparently the main chipset does have WiFi support built in. Searching for a Broadcom 43341 gives you this, but this might just be a red herring.

cb22 said:
Thanks for the root, XorZone. For anyone wondering, here's the dmesg of the watch
A few small observations from digging:
The main chipset seems to be the BCM23550
The CPU has 4 cores, 2 are disabled in software. Should be easy enough to reenable if you please
It definitely has WiFi hardware, but the firmware is currently missing from the image. If you mange to get a hold of compatible firmware and nvram, it should be simple enough to get WiFi up and running
The WiFi firmware message mentions a "43341". Which is odd because apparently the main chipset does have WiFi support built in. Searching for a Broadcom 43341 gives you this, but this might just be a red herring.
Click to expand...
Click to collapse
Yeah, I noticed the same about WiFi chip, it might be that they packed bcm43341 as part of the BCM23550 soc, like Invensense MPU9250 chip packs mpu6500 inside.
For the 43341 I'm finding it in the configs here: https://android.googlesource.com/kernel/tegra/+/bdde9f16131a5ac2039062d5ce22e3e153acbe68^!/
Looks like BCM43341 is BCM4334 + NFC chip, so we could try S3 I9300 files as per http://redmine.replicant.us/projects/replicant/wiki/GalaxyS3I9300Firmwares

how can i grant superuser permission to an app? i install es file explorer with sideload but i can't get superuser permission. the procedure is ok

Sorry admins for not putting in correct location....
Moved to Correct Area!

cdrshm said:
Sorry admins for not putting in correct location....
I can not get my device to show up in adb devices and its driving me crazy. Tried windows 7/8/server 2012R2 ..lol
Now I have done my fair share of custom roms and bootloaders.
OG Droid
Nexus
Nexus 10
Asus Memo Pad (came from alarm company, and could only load one app...now its a full running tablet)
I am sure its a silly thing I have done or am missing...
Thoughts....ideas?..need more info?
Click to expand...
Click to collapse
As usual, check if adb enabled in settings-about-developer options, if there are no developer options - it is as usual 7 times click on build number in about screen.

And please use Q&A thread for such questions

I've confirmed root survives the Lollipop update

Wow, I was out whole weekend, will have to catch up with the update

[TOOL] Lx Multi Tool v1.3.2 [WIN/LIN/MAC][Unlock/Recovery/Stock/Kernel/More]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
​It has LINUX/UNIX and MAC support!
​
Because there is another tool for Android called Android Multi Tools, I renamed this one to Lx Multi Tool, future releases will go under this name.
​ Features: ​
Fastboot​​- Unlock/Lock Bootloader​- Flash Recovery Menu (you can choose and add recoveries) - TWRP 2.8.7.2 Included​- Flash any partition (Flashing submenu)​- Flash full Stock images (you can choose and add images)​- Erase partitions (you can choose which of the partitions)​- Reboot (you can choose again...)​​Adb​​- Sideload .zip files (you can choose and add .zip files) - SuperSU v2.56 (Systemless!) included​- Backup (you can choose the name and place for your backup)​- Restore (you can choose your backup)​- Version (it just shows the version of your adb binaries) - platform-tools 23.0.1 included​- Logs (DMESG and Logcat)​- Screenshots (you can directly take screenshots to your PC with no Root)​- Reboot (lots of choices)​​Others​​- Refresh and delete files/folders from menus (Right-click or key F5 and Del)​- Open tool folders from the menus (to add your own kernel/stock image/recovery/sideload zip files)​- Tab key support for easier keyboard navigation​- Tool-tips for all buttons​- Check for updates​- Link to xda-thread (here)​​​ Download links: ​
Windows x86|x64 - Linux x64 - MAC x64​​All released versions can be found here.​​
​
(The latest versions are always on the bottom.)​​[ROOT] Use SuperSU 2.62 or higher from here systemless for 6.0.1 and above.​​
​ Known bugs/limitations: ​
- For partition Flashing, it is recommended(mandatory?) to do a reboot-bootloader if you want to flash multiple partitions one after the other. (according to the Google flashing scripts) (Implemented in 1.2.1)​- For the return to stock, the tool will be stuck after your phone successfully boots, you need to reboot to fastboot again in order to flash the Radio and finish the full return to stock. (Fixed in 1.2.0)​​
​ Changelog: ​
​Check the changelog for each release here.​​​ Tutorials/FAQ: ​
​Q: How do I get in bootloader/fastboot mode?​Turn off the phone and turn it on by using Volume down + Power key.​​Q: How do I check for updates on your tool?​Follow the instructions on the screen below.​
​Q: Where can I find the device driver to install it for windows?​Click here, download the driver, and run the setup.​​Q: How do I root my stock phone?​- Unlock bootloader.​- Flash recovery.​- Use SuperSU 2.62 systemless or higher from here.​(Usually the latest version upon tool release is included in the Sideload folder of the tool, you can either sideload it or copy it to recovery and flash it manually)​​Q: I get an error "Cannot open file" on MAC, what should I do?​Open the terminal, go to your application path and paste this command:​
Code:
chmod +x LxMultiTool.app/contents/macos/*
​Q: What do I need to do in order to be in Fastboot or in ADB mode.​Fastboot mode will be detected only while being in bootloader.​ADB mode will be detected from Recovery (custom) and actual ROM with USB debugging active.​Refresh button needs to be used in order to check for what mode you are in.​​Q: Are there any other software that I need to install in order to run this tool?​On Windows and MAC everything is bundled, so nothing needs to be installed, just run.​On Linux you need to install from your package manager libQt5Core, libQt5Widgets, libQt5Gui, libQt5Network.​If it's not enough, use ldd LxMultiTool in the terminal to find out what you're missing from your environment.​​Q: I have a yellow/orange/red text screen during boot, what's that?​When you unlock you usually get the Orange screen and it's normal, but if you really want to know what's this about, give a reading to this.​​Q: Hey, my device is not detected, why?​On windows, you need to manually install the USB drivers, they are not included and probably they won't be included in this tool.​Also, make sure you click the connection Refresh button after connecting the device to your PC.​​Q: What do I need to do in order to install a custom ROM?​1. Unlock Bootloader.​2. Flash a custom recovery of your choice.​3. Flash an insecure kernel (boot).​4. Flash custom ROM with no problems via recovery.​All those things are found and can be done via this tool.​​Q: Hi, I just downloaded this tool, how do i use it?​First, extract the folder somewhere.​After that, run LxMultiTool.exe on windows by double-clicking it, LxMultiTool on Linux, and the same on mac.​​Q: Do I need android-sdk installed or something else?​No! This tool uses its own supplied binaries for adb and fastboot, if you have android-sdk installed it will be ignored anyway.​This tool is fully portable and stand-alone.​​Q: I get an error while trying to unlock the bootloader -> FAILED(remote: oem unlock is not allowed), what now?​Starting with Android 5.0, you need to enable Bootloader Unlocking from the developer settings, in order to do that, follow these steps:​- Enable Developer options​- Enable USB Debugging​- Look for the ‘OEM Unlock’ Option and toggle it.​​Q: How do I use the return to stock feature?​First, download the latest package from here, then extract the contents (there is an archive in the archive) until you get to a folder like angler-mda89d​that contains the images, that folder needs to be copied in the /Data/StockPackages folder in order to be visible.​​Easier steps -> Get your device in bootloader -> Start the tool -> Hit refresh -> go to Stock -> hit open folder -> copy the extracted folder with the name angler-xxxxxx in there, hit F5 or Right-click + Refresh -> you should see the folder in there like in the following screenshot. Thanks @ursa08 for the screenie.​
​Q: How do I enable Developer options?​- Launch the Settings​- Scroll Down and Tap on About Phone(or About Device)​- Locate the Build Number Section​- Tap on the Build Number Option 7 Times​- Go Back to the Main Settings Page​- Scroll Down and Tap on Developer Options​​Q: Hi, I just bought a phone what should I do now?​Well, you firstly need to unlock your bootloader...​​Q: What is logcat?​Well, you can pretty much use google for that answer, but to put it short, is that thingy that tells you what is happening behind the scenes of your phone.​It is usually used for debugging and entertainment(?).​When you report an error/bug to somebody, it will be a blessing to provide a logcat (log file)!​​Q: What is a Custom Recovery and why do I need one?​A custom recovery is that thingy that lets you flash .zip files, use your logic, and you will get it why you need one.​​Q: There are other guides/tutorials out there. Should I check them instead of this?​If you manage to get things done using this one, no, otherwise yes, note that some could be outdated...​​Q: What is sideload and how do I use it?​Sideload is a function from adb that let's you flash a zip file while in recovery directly from your PC.​Please note that you need to be in sideload mode on your recovery before doing this.​To enter sideload mode, in TWRP go to Advanced -> ADB Sideload -> Swipe to sideload​
​ Sources: ​
The official and original repository can be found here.​​
​ Bug reports/feature requests: ​
If you have any bug, or you consider a feature to be a must-have, please use the issue functionality on GitHub for more traceability here.​​
​ Licensing: ​
Please note that this tool is open source and released under the GPL v3 license, which can be read here.​Make sure you understand at least the short version of the license that's provided in the tool before using it or before contributing/forking and other related stuff.​​
​ Tech and stuff: ​
Some additional marketing for stuff used in this tool​​Qt - An awesome cross-platform IDE​Vmware - For letting me test this tool on all platforms (Linux and MAC).​Icons8 - A nice platform for good-looking FREE icons. (Big thanks!)​UnixUtils - For the sed utility for Windows.​AndroidFileHost - For the awesome file-management platform for developers.​​
​ Donations: ​
Even though this tool is provided free of charge, fully open-source, donations are very welcome to support the future development of this tool and to buy me a beer while coding future improvements on it.​​This section will also include the hall of fame for donors and on the github repository.​​Special thanks for donations:​- @john7760​​
​ Disclaimer: ​
I will not be responsible for smashed screens, bricked phones, or any other things that you can accuse me of, I've done this tool to help people, use it at your own risk and consider giving a THANKS if you use it and like it.​Please consider leaving some feedback, what to improve, what could be done better, what annoys you, it really helps me improve the tool.
Also, to avoid useless threads on general, Q&A, or useless posts, please read the FAQ section upside, it's like a Mini-Guide!
XDA:DevDB Information
Lx Multi Tool, Tool/Utility for the Huawei Nexus 6P
Contributors
Lexmazter
Source Code: https://github.com/lexmazter/LxMultiTool
Version Information
Status: Stable
Created 2016-01-01
Last Updated 2016-01-16

Already tool kit?
*Damn, nexus dev support is amazing
I feel so bad for buying galaxy s6, 0 aosp roms, Mod edit: Profanity removed dev support and all because of stupid exynos ;C

You da man! Can't wait for my phone to show up.

That was quick!! Waiting for this phone to be launched in India.

It works great thanks.I mean Tool

Wow. Can't wait to get my 6P and use this
Sent from my A0001 using Tapatalk

Add to Nexus 6P index thread:
[INDEX] Huawei Nexus 6P

Haven't even received my device yet, just wanted to say Thanks in advance!

Showing so much promise
I can't say more for this kind of support.

Great to see this already in the forum. Waiting on my 6P 128 Gig MONSTER.

wilbarger said:
Great to see this already in the forum. Waiting on my 6P 128 Gig MONSTER.
Click to expand...
Click to collapse
Got the 128gb monster on the way myself.

Thanks for this. Making it easy for everyone is a great thing I'm so excited to get back on a nexus

Thanks for this tool, I need to start from scratch because I don't have a Nexus since Nexus One

Thanks for this. Will be a first time user for the nexus generation. Just ordered the 6P so will definitely be doing this .

Great seeing this already. Coming from an S4 to the 64GB 6P. Will it be possible to relock the bootloader after installing a custom recovery or is the stock recovery required for the lock?
Sent from my SPH-L720 using Tapatalk

C4PO said:
Great seeing this already. Coming from an S4 to the 64GB 6P. Will it be possible to relock the bootloader after installing a custom recovery or is the stock recovery required for the lock?
Sent from my SPH-L720 using Tapatalk
Click to expand...
Click to collapse
AFAIK, locking bootloader has nothing to do with the recovery, but then again, I never locked a bootloader...

Pretty sure you'd need to flash stock recovery. It won't hurt anything to try it without stock recovery, but if it doesn't work then you'll know for sure why.

I'm not planning to mess around with it too much until a stock system file is available. I need a Plan B. Lol

Doesn't run for me. (Mac User)
Heres the terminal error
sh [Path to location]/6PMultiTool.v0.2/6PMultiToolv0.2-M.sh
[Path to location]/6PMultiTool.v0.2/6PMultiToolv0.2-M.sh: line 3: [Path to location]/6PMultiTool.v0.2/simple_curses.sh: No such file or directory
There doesn't seem to be a "simple_curses.sh" file in the tool directory that I can find. Hope you can get it figured out! Thanks for the awesome tool as well!

ryman222 said:
Doesn't run for me. (Mac User)
Heres the terminal error
sh [Path to location]/6PMultiTool.v0.2/6PMultiToolv0.2-M.sh
[Path to location]/6PMultiTool.v0.2/6PMultiToolv0.2-M.sh: line 3: [Path to location]/6PMultiTool.v0.2/simple_curses.sh: No such file or directory
There doesn't seem to be a "simple_curses.sh" file in the tool directory that I can find. Hope you can get it figured out! Thanks for the awesome tool as well!
Click to expand...
Click to collapse
Unfortunately I never got the chance to test the MAC version, finally I have a tester
From what I can see at a first look is that this simple_curses.sh is some leftover from when I experimented with some UI tricks for bash to try to simulate the looks of the batch version..
Can you please check this temporary version from here -> 6PMultiTool.v0.2.1.zip

viper4android on 8.1.0

has anyone figured out viper4android on 8.1?
i think we need to wait for the kernel sources to get released. I tried magisk + v4a magisk module + busybox + permissive mode - and still no dice

What Version of v4a did you try?

Yes, I have it working.
Install it as normal (2.5.0.5, ShadySquirrel) with magisk and reboot
Use a root file explorer (I use Solid) to move /magisk/viper4android/system/lib/ to /magisk/viper4android/vendor/lib. Copy this folder to /magisk/viper4android/system/vendor/lib (making folders as well)
Copy /system/lib/libstdc++.so to both of these folders
Reboot, viper won't complain about drivers now. Open Viper's settings and set it to compatibility mode, and disable selinux with the development settings. You have to disable selinux every reboot for it to keep working.
I'll repackage the module at some point but this is how it works

did anyone get this to work? i followed directions and its still propting me to install driver

slothdabski said:
did anyone get this to work? i followed directions and its still propting me to install driver
Click to expand...
Click to collapse
I'll give it a go... usually good with this stuff and I'll let you know!
---------- Post added at 12:33 PM ---------- Previous post was at 12:13 PM ----------
Following those steps I was able to at least get Viper to install the driver without the I/O error.. but after I reboot it still asks to install... still trying. I deleted the /magisk/viper4android/system/lib/ after moving everything to /magisk/viper4android/system/vendor/lib ... maybe that was wrong?
---------- Post added at 12:51 PM ---------- Previous post was at 12:33 PM ----------
Not working here.. just can't seem to get it configured properly. Was able to get rid of the I/O error but.. it's still not enabled no matter what I do with it...
---------- Post added at 01:19 PM ---------- Previous post was at 12:51 PM ----------
I'm relocking my device... nothing to do with the process I attempted here.. Just keep losing root randomly and other odd behaviors ... will wait for an updated Magisk and Viper. Cheers!

wasn't able to get past the drive i/o error
i wasn't able to get past v4a complaining about drivers. i even recursively chmod -R 755 everything in the /magisk/viper4android folder in a desperate attempt to sift out a permissions issue
can someone who got past the drivers issue run:
ls -l -R
in /magisk - and paste the screenshot or output here? i've been using adb shell with root btw to navigate around the filesystem.
thanks!

Quinny899 said:
Yes, I have it working.
Install it as normal (2.5.0.5, ShadySquirrel) with magisk and reboot
Use a root file explorer (I use Solid) to move /magisk/viper4android/system/lib/ to /magisk/viper4android/vendor/lib. Copy this folder to /magisk/viper4android/system/vendor/lib (making folders as well)
Copy /system/lib/libstdc++.so to both of these folders
Reboot, viper won't complain about drivers now. Open Viper's settings and set it to compatibility mode, and disable selinux with the development settings. You have to disable selinux every reboot for it to keep working.
I'll repackage the module at some point but this is how it works
Click to expand...
Click to collapse
Didn't seem to work for me on 8.1 DP2. Maybe i copied the files wrong? I copied the lib folder from /magisk/viper4android/system to /magisk/viper4android/vendor, so basically I just copied the lib folder to that location. Then i went to /system/lib and copied libstdc++.so to /magisk/viper4android/system/lib/ and /magisk/viper4android/vendor/lib. Switched to permissive mode and compatibility and still bugs me about drivers. Maybe I had to move the files and not copy? I really don't know and I'm going crazy here. Any idea what I should do?

joedajoester said:
Didn't seem to work for me on 8.1 DP2. Maybe i copied the files wrong? I copied the lib folder from /magisk/viper4android/system to /magisk/viper4android/vendor, so basically I just copied the lib folder to that location. Then i went to /system/lib and copied libstdc++.so to /magisk/viper4android/system/lib/ and /magisk/viper4android/vendor/lib. Switched to permissive mode and compatibility and still bugs me about drivers. Maybe I had to move the files and not copy? I really don't know and I'm going crazy here. Any idea what I should do?
Click to expand...
Click to collapse
I've attached the viper folder from my magisk directory. Replace yours with it and set any file's permissions (although that shouldn't be needed because magisk can handle it), reboot and see if that works:
https://drive.google.com/file/d/1oTTQbox31LvPzQCd2iDadNZJIXJDcdHp/view?usp=sharing
Note, the zip IS NOT flashable, IS NOT installable by magisk and SHOULD NOT be used on anything other than a Pixel 2 XL running the 8.1 preview.

Quinny899 said:
I've attached the viper folder from my magisk directory. Replace yours with it and set any file's permissions (although that shouldn't be needed because magisk can handle it), reboot and see if that works:
https://drive.google.com/file/d/1oTTQbox31LvPzQCd2iDadNZJIXJDcdHp/view?usp=sharing
Note, the zip IS NOT flashable, IS NOT installable by magisk and SHOULD NOT be used on anything other than a Pixel 2 XL running the 8.1 preview.
Click to expand...
Click to collapse
Worked for me. I'm running the 8.1 preview DP2.
Strangely enough, your install files contained extra files than mine. The audio_effects.xml file wasn't there for mine on any installation. How odd.
Thank you, though. I followed your instructions in an earlier post and it never once started to work.
I'm not using compatible mode either.

Ariac Konrel said:
Worked for me. I'm running the 8.1 preview DP2.
Strangely enough, your install files contained extra files than mine. The audio_effects.xml file wasn't there for mine on any installation. How odd.
Thank you, though. I followed your instructions in an earlier post and it never once started to work.
I'm not using compatible mode either.
Click to expand...
Click to collapse
I modified that file a while ago as a test, no idea if it makes a difference. It might do ¯\_(ツ)_/¯

Quinny899 said:
I've attached the viper folder from my magisk directory. Replace yours with it and set any file's permissions (although that shouldn't be needed because magisk can handle it), reboot and see if that works:
https://drive.google.com/file/d/1oTTQbox31LvPzQCd2iDadNZJIXJDcdHp/view?usp=sharing
Note, the zip IS NOT flashable, IS NOT installable by magisk and SHOULD NOT be used on anything other than a Pixel 2 XL running the 8.1 preview.
Click to expand...
Click to collapse
It works! Thank you so much. At first it made the viper app disappear so I started over. I installed the module from magisk, rebooted and then copied the files, set selinux to permissive and then I was in business. Seriously thank you so much. Without viper, my car won't play below 50hz and with viper I can make it play down to 30hz. I also made my own convolver file to add a high pass filter so that my speakers don't try to play below 30hz because then they distort at moderate volume. With the convolver, I am able to blast it. Makes it sound like a have a subwoofer and I am pushing my speakers almost to their limits, but boy do they sound great. Again, thank you!

joedajoester said:
It works! Thank you so much. At first it made the viper app disappear so I started over. I installed the module from magisk, rebooted and then copied the files, set selinux to permissive and then I was in business. Seriously thank you so much. Without viper, my car won't play below 50hz and with viper I can make it play down to 30hz. I also made my own convolver file to add a high pass filter so that my speakers don't try to play below 30hz because then they distort at moderate volume. With the convolver, I am able to blast it. Makes it sound like a have a subwoofer and I am pushing my speakers almost to their limits, but boy do they sound great. Again, thank you!
Click to expand...
Click to collapse
Oh yeah, I never install the viper app to the system because it doesn't load IR profiles correctly then. I always remove it from the module and install it as a user app, you can also use any themed version you want then, like the material one:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Quinny899 said:
I've attached the viper folder from my magisk directory. Replace yours with it and set any file's permissions (although that shouldn't be needed because magisk can handle it), reboot and see if that works:
https://drive.google.com/file/d/1oTTQbox31LvPzQCd2iDadNZJIXJDcdHp/view?usp=sharing
Note, the zip IS NOT flashable, IS NOT installable by magisk and SHOULD NOT be used on anything other than a Pixel 2 XL running the 8.1 preview.
Click to expand...
Click to collapse
It works for me for phone speaker but I can't get it to process Bluetooth.

Quinny899 said:
Oh yeah, I never install the viper app to the system because it doesn't load IR profiles correctly then. I always remove it from the module and install it as a user app, you can also use any themed version you want then, like the material one:
Click to expand...
Click to collapse
Would you mind sharing your convolver for the low pass filter and/or be able to combine it with sibilance correction in the 8khz range (or teach us how)? I'm trying to use Tracks master de-essed convolver. The problem I'm having is that in BSD_Geek Jake's IRS pack, *the convolvers aren't working*.
I extracted the IRS files directly to the Kernel folder in Viper4Android directory on sdcard. Viper is processing, and I know because if I toggle FET compressor, I hear the difference. However, choosing any convolver doesn't affect sound.

Quinny899 said:
I've attached the viper folder from my magisk directory. Replace yours with it and set any file's permissions (although that shouldn't be needed because magisk can handle it), reboot and see if that works:
https://drive.google.com/file/d/1oTTQbox31LvPzQCd2iDadNZJIXJDcdHp/view?usp=sharing
Note, the zip IS NOT flashable, IS NOT installable by magisk and SHOULD NOT be used on anything other than a Pixel 2 XL running the 8.1 preview.
Click to expand...
Click to collapse
it works! thanks alot Quinny899

davidisflash said:
Would you mind sharing your convolver for the low pass filter and/or be able to combine it with sibilance correction in the 8khz range (or teach us how)? I'm trying to use Tracks master de-essed convolver. The problem I'm having is that in BSD_Geek Jake's IRS pack, *the convolvers aren't working*.
I extracted the IRS files directly to the Kernel folder in Viper4Android directory on sdcard. Viper is processing, and I know because if I toggle FET compressor, I hear the difference. However, choosing any convolver doesn't affect sound.
Click to expand...
Click to collapse
Like I say, remove the app from the magisk module's system/priv-app, reboot and install it as you would any other APK. I don't know why module authors insist on having the APK in the system, it breaks things

Quinny899 said:
Like I say, remove the app from the magisk module's system/priv-app, reboot and install it as you would any other APK. I don't know why module authors insist on having the APK in the system, it breaks things
Click to expand...
Click to collapse
I didn't do anything with moving it from the system app and my convolver works. I have an irs response I made to slope off <30hz and it works. Not sure what is happening there :shrug:

My method still works on the 8.1 release it anyone is wondering

Working for me on 8.1.

Quinny899 said:
My method still works on the 8.1 release it anyone is wondering
Click to expand...
Click to collapse
Sorry, I'm having a little trouble understanding how to use your method with your zip file. Should I extract the contents and then place that folder in my data apps, reboot, then install the apk??

Dolby Atmos Equaliser 7T (HD1903) (no root needed)

I was searching for the possibility to enable EQ on 7t without root, but nothing really worked, until I found Dolby Atmos DAX2 app (originaly from Razer phone)... (you can find it on apkmirror - I cannot share links yet...) works pretty well... you can even turn it off completely... maybe someone can have a use for it too...

https://www.apkmirror.com/apk/razer...x2_2-6-0-28_r1-android-apk-download/download/

Amazing!!!
Enviado desde mi HD1900 mediante Tapatalk

ChrisFeiveel84 said:
https://www.apkmirror.com/apk/razer...x2_2-6-0-28_r1-android-apk-download/download/
Click to expand...
Click to collapse
it's worked....

Thanks! With this app I disabled Dolby Atmos and everything sounds better now lol

:good:
---------- Post added at 12:19 AM ---------- Previous post was at 12:15 AM ----------
ej8989 said:
Thanks! With this app I disabled Dolby Atmos and everything sounds better now lol
Click to expand...
Click to collapse
Wow, it's truly amazing to test the demo showed in the app in order to appreciate the difference.
So once I installed the apk, how can I set it as the default app for sound? I mean, is it just turning it on? Do I have to disable the stock Dolby Atmos app? If so, how could I do that? Thank you very much.

adripgarcia96, this app and stock atmos (in settings) are only UI apps for tuning the same core dolby audio library, which is pre-installed and default already.
However stock atmos app will be always re-applying its own settings when you plug/unplug headphones (ie change output device), so to avoid mess i suggest 2 options:
1. If you have root, you can disable stock atmos tuner service ("SoundTunerService") via MyAndroidTools app.
2. If you don't have root, don't touch stock tuner in speaker mode (use only this app) and don't touch this app (use only stock tuner) with any headphones plugged.

Embox said:
adripgarcia96, this app and stock atmos (in settings) are only UI apps for tuning the same core dolby audio library, which is pre-installed and default already.
However stock atmos app will be always re-applying its own settings when you plug/unplug headphones (ie change output device), so to avoid mess i suggest 2 options:
1. If you have root, you can disable stock atmos tuner service ("SoundTunerService") via MyAndroidTools app.
2. If you don't have root, don't touch stock tuner in speaker mode (use only this app) and don't touch this app (use only stock tuner) with any headphones plugged.
Click to expand...
Click to collapse
I disabled built in dolby thru adb and just control dolby thru the app posted in this thread. Works as I intended it to.

ej8989 said:
I disabled built in dolby thru adb and just control dolby thru the app posted in this thread. Works as I intended it to.
Click to expand...
Click to collapse
Agree, adb is the deal too.
Did you also lose separate eq profiles for devices (need manual switch)? I still lack it.

ej8989 said:
I disabled built in dolby thru adb and just control dolby thru the app posted in this thread. Works as I intended it to.
Click to expand...
Click to collapse
How to do this via adb, sorry I am noob

Works great. Thank you for sharing

Works good. Tested it.

Embox said:
Agree, adb is the deal too.
Did you also lose separate eq profiles for devices (need manual switch)? I still lack it.
Click to expand...
Click to collapse
I always manual switch. The app posted in this thread has a Quick-settings toggle.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
DerDavid01 said:
How to do this via adb, sorry I am noob
Click to expand...
Click to collapse
1. Install Minimal ADB and Fastboot (CLICK HERE)
2. Enable Developer Options, then turn on USB Debugging
3. Connect phone to PC, when prompted in the phone, allow debugging
4. Type
Code:
adb shell pm disable-user --user 0 com.oneplus.sound.tuner
then press enter
5. Reboot.

ej8989 said:
I always manual switch. The app posted in this thread has a Quick-settings toggle.
1. Install Minimal ADB and Fastboot (CLICK HERE)
2. Enable Developer Options, then turn on USB Debugging
3. Connect phone to PC, when prompted in the phone, allow debugging
4. Type
Code:
adb shell pm disable-user --user 0 com.oneplus.sound.tuner
then press enter
5. Reboot.
Click to expand...
Click to collapse
Hi can you post how to reenable oneplus sound tuner, just in case?
Thank you
Never mind, to re-enable the app you need to type the following in windwos command prompt:
to re-enable built in sound tuner:
Code:
adb shell pm enable com.oneplus.sound.tuner
then reboot phone
by the way with this command you can list the currently disabled apps:
Code:
adb shell pm list packages -d

Frequencies in Hz for this 10-band EQ (both this app and stock dolby tuner):
46 220 460 840 1000 2000 3000 5000 9000 13800 (Hz)
Finally, these gains will be transformed into internal 20-band dolby EQ with frequencies:
46,141,234,328,460, 656,844,1031,1313,1688, 2250,3000,3750,4688,5813, 7125,9000,11250,13800,19688 (Hz)
The tenth band (13800 hz) tunes 19688 Hz as well. Might be useful for precise tuning

Hege said:
I was searching for the possibility to enable EQ on 7t without root, but nothing really worked, until I found Dolby Atmos DAX2 app (originaly from Razer phone)... (you can find it on apkmirror - I cannot share links yet...) works pretty well... you can even turn it off completely... maybe someone can have a use for it too...
Click to expand...
Click to collapse
It works well. Thanks

Can someone share thier settings in Dolby app which they feel really makes improvement on loudspeakers

Is it not getting switched off when you change songs. For me everytime I change songs this get switched off.

Why you install this app if oxygen has an internal dolby equalizer? Is the same...

Ivixmax said:
Why you install this app if oxygen has an internal dolby equalizer? Is the same...
Click to expand...
Click to collapse
No it's not.. this app is working better and you can feel the difference only by tapping on it's dedicated qs tile, when you're playing music or videos

[CLOSED][ROM] [UNOFFICIAL] [PhhGSI 12][MicroG] for OnePlus Nord N10

Treble ROM based on Phh Treble 12 with MicroG, signature spoofing, Feb 05 security patch and most FOSS apps.
Even it's treble rom it builds for Nord 10 5G, some stuff I removed, not sure about other models.
After some people ask me to put more stuff in my personal build I made more fat ROM to share here.
Be aware still very slim ROM!!!
Tested on model BE86AA 11.02 and 11.03 vendors.
Inside:
AntennaPod -podcast manager/player
SoftUI Calculator
Etar -calendar
EteSync - encrypted sync contacts,calendar and tasks
Fdroid with extra repos (microg and unoficial F-Droid)
Latest MicroG and location backends:
NominatimNlpBackend
MozillaNlpBackend
DejaVuLocationService
K9Mail -email client
KeePassDX - password Manager
Lawnchair12 - launcher
SmpleGalleryPro -Gallery
MiXplorer - File Manager. Clean chache and storage in case of problem at beggining.
Foss Browser - Browser
MupdfViewer - Pdf Viewer
Music Player Go - Music Player
NewPipe - YouTube replacement
NextCloud - Google Drive alt
Notally - Notepad
OAndBackup - Backup utility
OpenCamera - Camera
OpenTasks
Photok - Encrypted Photo Safe for Android
RethinkDns - Firewall+DNS+Ad Blocker
QKSMS - messenger
Signal - messaging/chat/calls/voip calls
SimpleReboot - reboot w/o buttons
WaveUp - Gravity Screen alternative
Weather - Geometric Weather
Bromite-Webview
What Works:
For me all that I and my wife needed. My wife on Dec rom, won't change anything. Me on latest rom with less stuff..
Source
Release AOSP 12.0 v402 · phhusson/treble_experimentations
More February security patch level (previous one had only some patches, not all) Available as OTA from v401 in Treble Settings => Updater
github.com
Requerements:
Unlocked bootloader, Android 11, adb installed, some knowledge
Allready rooted/phh su
Installation
There is two versions rw and ro.
Download what you need
Unpack
Inside you find:
All related img files
flash.bat - Windows
flash.sh - Linux
install.txt - terminal and manual instruction
mi folder - some themes for MiXplorer
Backup all your data because it would be deleted!!!
I'm not responsible for any loss or damage!!!
When inside folder start from terminal/command prompt ./flash.bat or ./flash.sh
Wait untill done ~ 5 min
Downloads
RW
RO​Some tips:
For navigation I use Magic Earth, but GMaps works too.
My banks and airline apps working you have to test your stuff.
Aurora Store should work if you need some stuff from Goole Play install it from FDroid and try.
Don't forget to give some permissions in MicroG and enable location backends.
90FPS
90 FPS can be enabled in Settings/Phh Treble Settings/Misc Features/Forse FPS
or in Settings/Display/Smooth Display with would auto adjust fps
or Settings/Dev Options/Force Pick refresh rate and to be sure Show refresh rate
MiXplorer
If MiXplorer wan't works right from start just clear cache and storage Setting/Apps/MiXporer/Storage & Cache
To import extra skins for MiXplorer copy files that I provided to storage, open MiXplorer navigate to files, short click on file and import to apply
3.5 jack
If got problems with sound enable Alternative audio policy in Setting/Phh Treble Settings/Qualicomm Features
Other
There is 2 launchers -Stock and Lawnchair12. Free to remove any but keep stock if you wanna Recent App view.
Any apps from rw version can be removed.
If for some reason rom won't boot don't panic and try to hard reboot (hold power button)
Enjoy!

r/w link not working but i got it!
you just did a typo

PopCaps1996 said:
r/w link not working but i got it!
you just did a typo
Click to expand...
Click to collapse
Don't use link inside install.txt it old.

gives me this error
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

fersabi said:
gives me this error
View attachment 5543415
Click to expand...
Click to collapse
You not in fastboot mode. After reboot in bootloader you do fastboot reboot fastboot before flash.
Check install.txt file for manual order.

fersabi said:
gives me this error
View attachment 5543415
Click to expand...
Click to collapse
you need fastbootd driver
Get the Google USB Driver | Android Studio | Android Developers
The Google USB Driver is required to perform adb debugging on Windows with Google devices.
developer.android.com

Updated - MusicPlayer, KeepassDX, StinglePhotos,Signal
Fix problem with ImagePipe, replaced LeafPics with SimpleGallerPro
Added Photok as secure safe media on local drive.,QR Barcode.OpenBoard

This Gsi is good but not great without of Auto Brightness, is a kind of killer.
There must be some requirments regarding this Gsi:
Auto Brightness
Live Display with Picture adjustment
Dirac Audio Tuner
without pre rooted
must include Stock Camera
with Oneplus Stock Dialer,contact and messaging apps
With google play services and support

Hello.
Thanks for all the work and time it's wonderful.
I have a couple problems I have been reaching and unable to fix them.
My phone is a OPO nord n10 5g unlocked. I had no problem installing the ROM. Since day one my 5g will not work only 3g on the T-Mobile network. I have fixed this problem in the past with not much problem, been weeks and still no fix. Every time I try to change the APN and reboot the phone switches back the APN she was set to during the setup and still on super slow 3g.
Do you know the T-Mobile 5g APN for the Tampa FL area I don't thinkit makes a difference.
2. Since the install of your ROM the when I open most apps microG like magic earth and other apps I get a microG core error and if I type to the side the app king of works guidance kept the vocals going but the visual was frozen. Any way fix this maybe update microG. I also have Vanced YouTube instaled with microG not sure if this will cause a problem.
Thasnks in advance.
Tony

tsman said:
Hello.
Thanks for all the work and time it's wonderful.
I have a couple problems I have been reaching and unable to fix them.
My phone is a OPO nord n10 5g unlocked. I had no problem installing the ROM. Since day one my 5g will not work only 3g on the T-Mobile network. I have fixed this problem in the past with not much problem, been weeks and still no fix. Every time I try to change the APN and reboot the phone switches back the APN she was set to during the setup and still on super slow 3g.
Do you know the T-Mobile 5g APN for the Tampa FL area I don't thinkit makes a difference.
2. Since the install of your ROM the when I open most apps microG like magic earth and other apps I get a microG core error and if I type to the side the app king of works guidance kept the vocals going but the visual was frozen. Any way fix this maybe update microG. I also have Vanced YouTube instaled with microG not sure if this will cause a problem.
Thasnks in advance.
Tony
Click to expand...
Click to collapse
You need update microg. Drop what version you have in private message and I give you link to different microg. For T-Mobile if I recall right they have some apps installed on stock that control apn. don't have T-Mobile version to look at it. Also check if there is imssettings apk.It shoud be in product I guess. If not try to install it.

LOL
Oops
Tony

@boom15
can you rebuild the gsi with a13
GitHub - TrebleDroid/treble_experimentations: Scripts to automatically build/CI/Release TrebleDroid GSI
Scripts to automatically build/CI/Release TrebleDroid GSI - GitHub - TrebleDroid/treble_experimentations: Scripts to automatically build/CI/Release TrebleDroid GSI
github.com