{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
[B][FONT="Tahoma"][COLOR="Black"]/*
* I Do not Become Responsible For The Bad Installation
* Now Your Warranty Is Mine, Before Flashing Investigate
* You Decide to Make All These Modifications to Your Device
* Under Your Own Risk, If You Spoil Your Device, I Will Laugh At You
*/[/COLOR][/FONT][/B]
KingOfMezi
Hello, Today I Present The Official Firmware Of Huawei P10 Lite, Fully Flasheable For Any Recovery Twrp To Solve Any Problem You Have Device
Or To Return To Stock Or From A Custom Rom Or For The Simple Echo Of Updating Latest Updates From Our Huawei P10 Lite.Latinoamerica
And Europe Asia Pacific,ATT Mexico, Italy TIM, China, Etc.
Click to expand...
Click to collapse
REQUIREMENTS:
-Bootloader Unlocked
-Activate USB Debugging
-Activate Unknown Applications
-Activate OEM Unlock
INSTALLATION:
-Install Specialized Recovery Twrp for Huawei P10 Lite (It is Automated)
-Installed Through Fastboot Mode, Unzip File (Twrp P10 Lite Nougat By KingOfMezi)
-Click on the Bat File and Enter, Automatically Install The Recovery ....
-Change the Data Partition to F2FS
(If You Already Have It By Default Skip This Step)
We mark
-Davilk / Art Cache
-Cache
-Data
-Internal Storage
-System
-Vendor
-Product
-Only Mark What I Mention
-And We Make The Wipes, Already Finished, We Back Everything.
-Flashes The Firmware (Delay Around 4 to 5 Minutes)
-Flash Update_Data_Full (1 to 2 Minutes Delay)
-When Finish, We Give In Reboot System (Phone Automatically Initiate)
-We do Initial Configuration
-Initial Start and Enjoy....
Click to expand...
Click to collapse
Telegram Group:
Here Will Support for All Hi6250 Devices:
Huawei Mate 10 Lite,Huawei P10 Lite,Honor 6X,Honor 7X,Honor 8 Lite
Honor 5C,Huawei P9 Lite 2017 y 2016 https://t.me/joinchat/HH00UkNvNQYbZDjlDcrhHw
Download:
-The Specialized Recovery To Flash The Firmware Of The P10 Lite And Custom Rom By KingOfMezihttps://mega.nz/#!WFYWEJjJ!HZGsY4WKdbYGr6M8VEeztDCzQe6UN020ro6f_g6V8FY
Firmware for Versions of Europe Free Versions (Dual Sim)
-Huawei P10 Lite-WAS-LX1C432B208 https://mega.nz/#!WYI3FbyI!9Et7Gwzllz5gZNLo4Ki709vJTpo1tzpIeHsi8r5qHC4
-Update_Data_Full_B208 (Uploading Files)
Firmware for Versions of Europe Free Versions (Dual Sim)
-Huawei P10 Lite WAS-LX1C432B198 https://mega.nz/#!ONRmQQaT!Aa10s9Q5aonulm4Y_1ckn0Nht4PDaXuKyD9a2FsC0Bc
-Update_Data_Full_B198 https://mega.nz/#!rM4xzaRJ!bL1tB4fM7xzla2sj5g306Yhta2rvUHRLW_7TskJQW-c
Firmware For Europe Versions Operator (Dual Sim)
-Huawei P10 Lite-WAS-LX1AC432B198 https://mega.nz/#!6QhXWaAQ!naBsbGL2NCmtpQefSh40yxErugfeEhpXfrhf0P0SDw4
-Update_Data_Full_LX1A_B198_Oficial https://mega.nz/#!nZRSXLqY!aV--g7HMeCRYTaZ2PuwwuzD6t8mRyUsug7CmTGB8xwU
Firmware for Versions of Europe,Asia Pacific Free Versions (Dual Sim)
-Huawei P10 Lite-WAS-LX1C185B176 https://mega.nz/#!LdAjiBwS!yzp8fshJiVUIMw59DjCJ0pI4l-jtzD1DJKp8eM-guNc
-Update_Data_Full_LX1_B176_Oficial https://mega.nz/#!TEZwAb6Z!3ZS6NBdsUSCqXkNyIMZPYshtccMqCrrWvCttupZovEc
Firmware for Latin American Versions Free Versions (Dual Sim)
-Huawei P10 Lite WAS-LX3C605B176 http://skamaker.com/6NzE
-Update_Data_Full_B176 http://skamaker.com/6O35
Firmware for Versions of Russia (Dual Sim)
-Huawei P10 Lite-WAS-LX1C10B174 https://mega.nz/#!mBICESIB!k0g5UGoCxuin4kPWQsQpB8vlEpFEmV03WUs_Oc1UhRQ
-Update_Data_Full_LX1C10_B174_Oficial https://mega.nz/#!DNxTyCSQ!hlrs-LvcioQOiNwQZY8ZR9tQVOSLqGrmfMMbBp9Cer0
Firmware for Versions of Europe (Single Sim)
-Huawei P10 Lite-WAS-LX1C432B197 https://mega.nz/#!zF5FibYY!z4HBtMrUPR5BHuLZ6988zKTm1yOz4NxS_75FSTRBNqA
-Update_Data_Full_B197_Oficial https://mega.nz/#!mIh0VRzL!F-KW9ndYqW55p4-VHvEFjJhNxg2518cvk0eOfVok1ps
XDA:DevDB Information
Huawei P10 Lite Official Firmware, ROM for the Huawei P10 Lite
Contributors
KingOfMezi
ROM OS Version: 7.0 Nougat
ROM Kernel: Linux 4.x
[ROM] Firmware Required: EMUI 5.1
Version Information
Status: Stable
Stable Release Date: 2018-01-17
Created: 2018-01-17
Last Updated: 2018-01-17
Changelog:
Status: Stable
Desarrollador: KingOfMezi @ xda-developers
-Multi Cust Compatible With Any Version Of Huawei P10 Lite (Choose Firmware According To Your Version)
-Impletamented The Update_Data_Full and The Update_Data_Public (Fully Complete Data Partition)
-Firmware Official Ready to Bounce and Start Normally (Format System.New.Data and System.img)
Can I use METICULUS TWRP or "Twrp P10 Lite Nougat By KingOfMezi" is mandatory?
Also can this version WAS-LX1C432B198 (Dual sim / 4GB RAM) works on my phone WAS-LX1C432B193 (Single sim / 3GB RAM)? Will the 2nd slot be unlocked?
Can we receive official OTA updates by update menu in our phones?
Aalesund said:
Can I use METICULUS TWRP or "Twrp P10 Lite Nougat By KingOfMezi" is mandatory?
Also can this version WAS-LX1C432B198 (Dual sim / 4GB RAM) works on my phone WAS-LX1C432B193 (Single sim / 3GB RAM)? Will the 2nd slot be unlocked?
Can we receive official OTA updates by update menu in our phones?
Click to expand...
Click to collapse
if forward I did not prove it with that recovery twrp under your responsibility,
if your version is WAS-LX1C432 you can flash without any problem,
since the WAS-LX1C432B198 is the latest version, Dual Sim
this post that I open is used to return to stock from a custom rom, as long as you are in the correct version
Finally....Great job! Thanks man!
Any idea why sim slots are inactive?
I tried factory reset, reflash the rom + update data, but none of them works
Aalesund said:
Any idea why sim slots are inactive?
I tried factory reset, reflash the rom + update data, but none of them works
Click to expand...
Click to collapse
edit:
and a new update for your model WAS-LX1C432B193 single sim, make the firmware WAS-LX1C432B197 flasheable so you can update the latest version according to your model, so you can fix the detail you had, since the firmware you flashed WAS-LX1C432B198 (dual sim) was not for your model
http://pro-teammt.ru/firmware-database/?firmware_model=WAS-LX1C432B197&firmware_page=0
For the ,WAS-LX1AC432B182 which one can I install? is dual sim!
Enviado do meu WAS-LX1A através do Tapatalk
torcato said:
For the ,WAS-LX1AC432B182 which one can I install? is dual sim!
Enviado do meu WAS-LX1A através do Tapatalk
Click to expand...
Click to collapse
edit:WAS-LX1AC432B182
I will make the firmware WAS-LX1AC432B197 so you can go back to stock, or update the latest available update of your huawei p10 lite
http://pro-teammt.ru/firmware-database/?firmware_model=WAS-LX1AC432B197&firmware_page=0
---------------------------------------------------------------------------------------------------------------------------------------
flash by twrp?
Enviado do meu WAS-LX1A através do Tapatalk[/QUOTE] @torcato
you can not flash, the firmware of finder will give you error and your mobile kedara in brick
I have to work on that firmware so it can flash through the recovery twrp
in linux, it will take me a few days to put the links, be attentive
Deleted.
KingOfMezi said:
edit:WAS-LX1AC432B182
I will make the firmware WAS-LX1AC432B197 so you can go back to stock, or update the latest available update of your huawei p10 lite
http://pro-teammt.ru/firmware-database/?firmware_model=WAS-LX1AC432B197&firmware_page=0
When can we expect it?
Click to expand...
Click to collapse
@torcato @geeklynx @Aalesund
Added Firmware for Dual Sim and Single Sim Versions
Firmware for Versions of Europe Free Versions (Dual Sim)
-Huawei P10 Lite-WAS-LX1AC432B198 Security Patch January 1, 2018
-Update_Data_Full_LX1A_B198_Oficial
Firmware for Versions of Europe (Single Sim)
-Huawei P10 Lite-WAS-LX1C432B197
Update_Data_Full_B197_Oficial
KingOfMezi said:
@[email protected]
Added Firmware for Dual Sim and Single Sim Versions
Firmware for Versions of Europe Free Versions (Dual Sim)
-Huawei P10 Lite-WAS-LX1AC432B198 Security Patch January 1, 2018
-Update_Data_Full_LX1A_B198_Oficial
Firmware for Versions of Europe (Single Sim)
-Huawei P10 Lite-WAS-LX1C432B197
Update_Data_Full_B197_Oficial
Click to expand...
Click to collapse
Thank. You.
Looking forward for the download links!
KingOfMezi said:
@torcato @geeklynx @Aalesund
Added Firmware for Dual Sim and Single Sim Versions
Firmware for Versions of Europe Free Versions (Dual Sim)
-Huawei P10 Lite-WAS-LX1AC432B198 Security Patch January 1, 2018
-Update_Data_Full_LX1A_B198_Oficial
View attachment 4397028 View attachment 4397029
Click to expand...
Click to collapse
Hello,
Thank you for all the work done !
Is it possible to flash a model under WAS-LX1AC109B135 with the rom WAS-LX1AC432B198 ?
Thank you in advance for your reply.
hang-loose said:
Hello,
Thank you for all the work done !
Is it possible to flash a model under WAS-LX1AC109B135 with the rom WAS-LX1AC432B198 ?
Thank you in advance for your reply.
Click to expand...
Click to collapse
It should be
geeklynx said:
It should be
Click to expand...
Click to collapse
I tested on a WAS-LX1AC109B135 but reboot it remains blocked.
Backtracking while waiting for a solution !
hang-loose said:
I tested on a WAS-LX1AC109B135 but reboot it remains blocked.
Backtracking while waiting for a solution !
Click to expand...
Click to collapse
Your oeminfo may be causing this issue, a simple rebrand would do....
geeklynx said:
Your oeminfo may be causing this issue, a simple rebrand would do....
Click to expand...
Click to collapse
Sorry, but how can we change the name in or from oeminfo ?
Thank you for the answer !
hang-loose said:
Sorry, but how can we change the name in or from oeminfo ?
Thank you for the answer !
Click to expand...
Click to collapse
You can't change the name on OEMInfo, you can flash another region's model OEMInfo. Search for p10 lite OEMInfo collection here on XDA...
geeklynx said:
You can't change the name on OEMInfo, you can flash another region's model OEMInfo. Search for p10 lite OEMInfo collection here on XDA...
Click to expand...
Click to collapse
Not better !
I flashed oeminfo WAS-LX1AC432B182 (Dual Sim 4GB version) but it remains stuck on the window Huawei Recovery.
new backspace !
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I am not responsible for anything that may happen to your phone as a result of installing custom roms and/or kernels. you do so at your own risk and take the responsibility upon yourself.
Part -A Configure Computer
1) Download and extract the Stock firmware, Setup tools & Drivers
2) Install ADB Drivers
3) Install Lenovo ZUK Z2 PLUS (2132) Drivers
4) Setup Tool all in one
5) Setup Mi Flash tool
Part -B Booting device in to EDL Mode
Note : Thank to @mauronofrio for his tool
1) Enable Android debugging (ADB) in developer options
2) Connect your device to PC
3) open Tool all in one
4) The tool detects your device and pop up a window on your z2 plus device
5) chick and click OK
6) Know go to Tool all in one > Advance Options
7) click Reboot EDL
8) Device will boot in to EDL Mode
Part -C Flashing stock Firmware
1) Open Mi Flash tool
2) Click on refresh to detect your Z2 plus as COM X ( Note : X represents device port numbers )
3) If you want to lock bootloader then select " clear all and lock " which was present on right bottom corner
4)Click on flash
Note : Never disconnect your device while MI tool was flashing
5) It take 300 sec to complete task after that hold power key for 15 sec to boot your device
Lenovo ZUK Z2 Plus ( 2132) Nougat
Indian firmware ( Note : all partitions fixed by me :good: )
Mi Flash tool ( Note : Recommended and Modified version by Me for deep partitions:fingers-crossed: )
Tool All In One ( Note : for Booting in to EDL, flashing TWRP , Unlock & lock bootloader )
adb-setup ( Note : Very important )
Other useful links ( If you want )
Drivers
PdaNet
Qualcomm_QHSUSB
ZUK_Z2132_drivers_V1.0.5
Tools
QPST
@ZUK ................................... for device
@zukfans.eu ..................... for source
@Francko76 .................... for source
@xiaomi .............................. for MI Flash tool
@mauronofrio ................. for Tool All In One
@Annabathina .................. for fixing deep partitions
@XDA ................... developers for helping me
@lenovo forum ........... developers
Lenovo ZUK Z2 Plus ................. Model 2132
XDA:DevDB Information
[Rom][7.0]Lenovo ZUK Z2 PLUS (2132) INDIAN firmware V2.5.104ST using MI Flash tool, ROM for the Lenovo ZUK Z2 (Plus)
Contributors
Annabathina
ROM OS Version: 7.x Nougat
Based On: Stock rom
Version Information
Status: Stable
Current Stable Version: 2.5.104ST
Stable Release Date: 2017-04-18
Created 2017-09-25
Last Updated 2017-09-25
Reserved
Reserved
RESERVED
Good to see you buddy.....loved your work in yu forums. Hope you will do same with thus device too.....looking forward
Sent from my Z2 Plus using Tapatalk
Anna in zuk z2 forum :silly::laugh:
Now this phone will rock
Dextron01 said:
Good to see you buddy.....loved your work in yu forums. Hope you will do same with thus device too.....looking forward
Click to expand...
Click to collapse
stop quoting op please...
Dextron01 said:
Good to see you buddy.....loved your work in yu forums. Hope you will do same with thus device too.....looking forward
Sent from my Z2 Plus using Tapatalk
Click to expand...
Click to collapse
Dont quote everything. Fvck!
El Psy Congroo
https://t.me/joinchat/ExDwekLF21qSDmOwudq3gg I suggest you to join here @Annabathina
Interesting! Will try it out.
Thanks a lot for sharing!
Update. Be careful when flashing! Selecting save user data still wipes the phone and locks the bootloader. I made a backup like a week ago so didn't lose important data.
Can I use QFIL to flash this?
El Psy Congroo
Magz Heaven said:
Can I use QFIL to flash this?
El Psy Congroo
Click to expand...
Click to collapse
of course you can but I did not tried on QFIL
it works excellent on Mi Flash tool including deep partitions , bootloader locking etc
daviduco said:
Is this stock indian? What modifications does it has?
Click to expand...
Click to collapse
Its just the Indian version without any chinese apps or bloatwares... Indian version lacks some features which are present in the Chinese version and has some bugs too
I have flash today the 7.0(as you given for downloading) firmware using mi flash tool the process was successful but after that I have tried to install AEX 4.6 but Volte was not working then I flashed the official 6.0 firmware using QFIL Volte we as enabled then I again tried to flash AEX but Volte was not working even I have turned on Volte in stock rom before flashing custom ROM
Any help?
kany1 said:
I have flash today the 7.0(as you given for downloading) firmware using mi flash tool the process was successful but after that I have tried to install AEX 4.6 but Volte was not working then I flashed the official 6.0 firmware using QFIL Volte we as enabled then I again tried to flash AEX but Volte was not working even I have turned on Volte in stock rom before flashing custom ROM
Any help?
Click to expand...
Click to collapse
wowo did you really flash a 7.x ROM on top of 6.x stock?
fallen.kn said:
wowo did you really flash a 7.x ROM on top of 6.x stock?
Click to expand...
Click to collapse
Before flashing with mi flash tool I was using AEX 4.6 and then i tried this flashing and when i was having problem with Volte then I flashed the original firmware (marshmallow) using QFIL)Volte was working then I flash AEX 4.6 but then also Volte was not working. I don't know why that strange behavior was there with Volte because I have flashed tons of rom before and I know all the procedure that how to flash a custom rom. So i think there was some problem with the package which is provided for flagging with mi tool because the flashing was done using EDL method. But my Volte is again working fine because someone provide the solution on AEX 4.6 discussion.
When I click on Reboot EDL , my device just reboots to system. How does the EDL mode looks like? Is it like fastboot mode? Why is my device booting into system again. I followed all the steps provided, am i missing somthing
Phone isn't booting into edl mode... Instead of that phone is rebooting.
I had the same problem
kany1 said:
Before flashing with mi flash tool I was using AEX 4.6 and then i tried this flashing and when i was having problem with Volte then I flashed the original firmware (marshmallow) using QFIL)Volte was working then I flash AEX 4.6 but then also Volte was not working. I don't know why that strange behavior was there with Volte because I have flashed tons of rom before and I know all the procedure that how to flash a custom rom. So i think there was some problem with the package which is provided for flagging with mi tool because the flashing was done using EDL method. But my Volte is again working fine because someone provide the solution on AEX 4.6 discussion.
Click to expand...
Click to collapse
What was the solution? I had the same problem.
I think developers are sleeping... Nobody is giving solution.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
[B][FONT="Tahoma"][COLOR="Black"]/*
* I Do not Become Responsible For The Bad Installation
* Now Your Warranty Is Mine, Before Flashing Investigate
* You Decide to Make All These Modifications to Your Device
* Under Your Own Risk, If You Spoil Your Device, I Will Laugh At You
*/[/COLOR][/FONT][/B]
KingOfMezi
Hello, today I present the official firmware of Huawei P10 Lite, completely flasheable for any recovery of Twrp to solve any problem you have,instability in the phone, bug, brick, etc,Or to return to stock from a custom ROM or by the simple echo of updating the latest updates of our Huawei P10 Lite.Latinoamerica And Europe Asia Pacific, ATT Mexico, Italy TIM, China, etc.
Click to expand...
Click to collapse
REQUIREMENTS:
-Bootloader Unlocked
-Activate USB Debugging
-Activate Unknown Applications
-Activate OEM Unlock
Huawei P10 Lite-Recovery Twrp EMUI 8.0.0
-Decompress File:
We turn Off The Phone And Enter The Fastboot Mode,We Open The Cmd Window And Write These Codes:
https://mega.nz/#!2VZGXawC!2-9yPFh3reghkGcfSl3nRIJhHGkP8fqDsgUG66ewjkk
Code:
[B][FONT="Tahoma"][COLOR="Black"] fastboot flash recovery_ramdisk RECOVERY-V2.img[/COLOR][/FONT][/B]
INSTALLATION:
We Copy The Firmware And Data_Full To The SD Card
We Turn Off The Phone,And Enter Recovery Twrp
Go Wipe
We mark
-Davilk /Art Cache,Cache,Data,Internal Storage,System
-Only Mark What I Mention
-And We Make The Wipes, Already Finished, We Back Everything.
-Flash The Firmware (Delay Around 4 to 5 Minutes)
-Flash Update_Data_Full (1 to 2 Minutes Delay)
-When Finish, We Give In Reboot System...
We turn Off The Phone And Enter The Fastboot Mode:
-Decompress File:
Kernel-Ramdisk.zip
We Open update.bat Press Enter
-Automatically Install Ramdisk+Recovery Stock And Kernel
-When Finish, We Give In Reboot System...
Reboot To Stock Recovery By Vol+ And Power Button
Do a Factory Reset And Reboot System We do Initial Configuration
Initial Start And Enjoy....
The THANKS button encourages me to keep working for free. You decide if it's worth pressingDownload:
Firmware For Versions Of Europe Free Versions (Dual Sim)
-Huawei P10 Lite-WAS-LX1 8.0.0.321(C432log) https://mega.nz/#!GRwk0R6b!PrhJ_UyWgvMzVinfDpSArCVHz0Bs8hSSywkECtWWklg
-Update_Data_Full_LX1(C432B321log) https://mega.nz/#!nEYhzbwR!KVQe7y8yi-vQzt4GZvSHi_JfXUi9ccZOeFz9kbpXsKA
-Kernel-Ramdisk(C432B321log) https://mega.nz/#!yGw1hQyL!NAHjs6KFC74TfFvSNtLhNK-4FBelmbFMO1IFXBSqyxI
Firmware For Versions Of Europe Free Versions (Dual Sim)
-Huawei P10 Lite-WAS-LX1 8.0.0.368(C432log) https://mega.nz/#!nWxkBYjA!kxLMbLSS9jxKiQ_QgiYD84sRMAfzi_Nf-hB-rbDfsw4
-Update_Data_Full_LX1(C432B368log) https://mega.nz/#!iKw2SYhZ!53bwt4xsnBBi3h3lD-MGj4C6Rj1OKXUKUP11WfruWrc
-Kernel-Ramdisk(C432B368log) https://mega.nz/#!XCo01I5K!31b5Za_oT5iSUy-KmTDAmagCftp-VBBqgla29-ADSfk
Telegram Group:
Here Will Support for All Hi6250 Devices:
Huawei Mate 10 Lite,Huawei P10 Lite,Honor 6X,Honor 7X,Honor 8 Lite
Honor 5C,Huawei P9 Lite 2017 And 2016 https://t.me/joinchat/HH00UkNvNQYbZDjlDcrhHw
XDA:DevDB Information
Huawei P10 Lite
Contributors
KingOfMezi
Chisetdel31260
Neondragon1909
-KangVIP Framework & Team HRT
-Team Win Recovery Project For P10 Lite
ROM OS Version: Android 8.0.0 Oreo
ROM Kernel: Linux 4.4.23+
ROM Firmware Required: EMUI 8.0.0
Version Information
Status: Stable
Current Stable Version: 2018-04-12
Stable Release Date: 2018-04-12
Created: 2018-04-14
Last Updated: 2018-04-14
ChangeLog:
New added recovery for Oreo emui 8.0.0 p10 lite version V2 (2018-04-17)
- https://mega.nz/#!2VZGXawC!2-9yPFh3reghkGcfSl3nRIJhHGkP8fqDsgUG66ewjkk
-Added sections for installation and backup everything works
-system, product, version, cust, vendor, boot, kernel
- The partition data are not backed up.
-Thanks to Team MT
__________________________________________________ _________________________
ChangeLog:
-Huawei P10 Lite WAS-LX1C432B321 (2018-04-12)
-This Serves To Return To a Custom Rom Or Generic Aosp,Lineage Os 15,Rom Stock EMUI 8.0.0
-This Is My First Version That I Make Flash Firmware For P10 Lite EMUI 8.0.0
-So Once You Know How Is Its Structure,Things Will Change,And It Will Be Easier
-To Flash Android 8.0.0,In Any Twrp,Without So Many Codes Via Fastboot.
-Kernel Disabled Some Codes To Be Able To Boot
-Ramdisk Disabled Some Codes to be able to Boot
-Added Support Init.d
-Added Oreo Recovery Stock For Any Model P10 Lite WAS-LXX
-Added Recovery Twrp For Oreo Beta P10 Lite https://mega.nz/#!uZxHiLbI!KH1_PLQWi1Q6FxCLTLu9_0fponYiFVZ3XwpsE2gMSMs
-Implemented The Update_Data_Full and The Update_Data_Public (Fully Complete Data Partition)
I guess file is still being uploaded.
So this will help us to recover stock ROM after installing treble roms and custom oreo roms right? I guess everything is oreo based, including partitions?
Anyway, thanks for the great job, good luck!
test
Hi, great god. P10 lite oreo 8.0, my device p9 lite VNS-DL00 replaced Oeminfo for P10Lite WAS-LX1AC432 and brushed into 7.0 firmware B182, phone bugs> sim card no service and no sound thinking through FF simulation agent ota update 8.0 download done but Verify illegal firmware. . So can't update perhaps it is verified by imei. Hope you can help.：笑：：d
LHFGS said:
Hi, great god. P10 lite oreo 8.0, my device p9 lite VNS-DL00 replaced Oeminfo for P10Lite WAS-LX1AC432 and brushed into 7.0 firmware B182, phone bugs> sim card no service and no sound thinking through FF simulation agent ota update 8.0 download done but Verify illegal firmware. . So can't update perhaps it is verified by imei. Hope you can help.：笑：：d
Click to expand...
Click to collapse
Hi, use HWOTA to update, check for thread in this forum.
test
Almost forgot that the phone did not have any sound
---------- Post added at 06:41 PM ---------- Previous post was at 06:35 PM ----------
Jaizu said:
Hi, use HWOTA to update, check for thread in this forum.
Click to expand...
Click to collapse
OK？Yeah, I will rest, or use HWOTA will succeed. Thanks.Please give a link.
---------- Post added at 06:42 PM ---------- Previous post was at 06:41 PM ----------
Jaizu said:
Hi, use HWOTA to update, check for thread in this forum.
Click to expand...
Click to collapse
OK？Yeah, I will rest, or use HWOTA will succeed. Thanks.Please give a link.
Thank you for the work you've done.
I have a problem...
TWRP working... i flash files but my phone is always on this screen...
Any solution? Bootloader working & unlocked.
hi6250 fro Twrp oero8.0
Just saw the landlord's firmware, I first test the landlord's good stuff oero custom hi6250. Do not change oem brush to try it. Thank you for the firmware provided by the landlord.
---------- Post added at 07:10 PM ---------- Previous post was at 06:59 PM ----------
VZ Power said:
Thank you for the work you've done.
I have a problem...
and my phone is always on this screen...
Any solution? Bootloader working & unlocked.
Click to expand...
Click to collapse
Xda Forum has such a post discussion, you can search, no power hold down the sound button to insert the USB data cable vibration press the power button must be quickly, try several different buttons, the key is still no electricity test. I hope your phone is okay. Good luck.
VZ Power said:
Thank you for the work you've done.
I have a problem...
and my phone is always on this screen...
Any solution? Bootloader working & unlocked.
Click to expand...
Click to collapse
You flashed this on emui 8 or on emui 5?
Alexxxx1 said:
You flashed this on emui 8 or on emui 5?
Click to expand...
Click to collapse
I have EMUI 8 but i flash a bad files and i have this error!
VZ Power said:
I have EMUI 8 but i flash a bad files and i have this error!
Click to expand...
Click to collapse
Use this Chinese recovery, let me know how it went
http://www.mediafire.com/file/icpfjhw9eysjlao/FIGO321.img
code:
fastboot flash recovery_ramdisk FIGO321.img
KingOfMezi said:
Use this Chinese recovery, let me know how it went
Click to expand...
Click to collapse
I flashed this recovery and i go follow steps...
We mark
-Davilk / Art Cache
-Cache
-Data
-Internal Storage
-System
-Only Mark What I Mention
-And We Make The Wipes, Already Finished, We Back Everything.
-Flashes The Firmware (Delay Around 4 to 5 Minutes)
-Flash Update_Data_Full (1 to 2 Minutes Delay)
-When Finish, We Give In Reboot System...
Click to expand...
Click to collapse
But i cant boot... Error recovery image, bla bla...
VZ Power said:
Thank you for the work you've done.
I have a problem...
TWRP working... i flash files but my phone is always on this screen...
Any solution? Bootloader working & unlocked.
Click to expand...
Click to collapse
flash other twrp. it worked for me
HYPER98889 said:
flash other twrp. it worked for me
Click to expand...
Click to collapse
I already use two recovery... TWRP (in this thread) and TWRP chinese... but i have the same result... ERROR... :/
VZ Power said:
I flashed this recovery and i go follow steps...
But i cant boot... Error recovery image, bla bla...
Click to expand...
Click to collapse
1: Decompress file https://mega.nz/#!fRZUgAyS!LbIs8ntFFgRVplgcs0pQo_1Ou1vncF5rKygVKec3um8
2:reboot to fastboot again:
3:and flash stock recovery:
Code:
Code:
fastboot flash recovery_ramdisk recovery_ramdisk.img
4: Reboot to stock recovery by vol+ and power button.
5:.Do a factory reset and Reboot system.
6:enjoy
KingOfMezi said:
1: Decompress file https://mega.nz/#!fRZUgAyS!LbIs8ntFFgRVplgcs0pQo_1Ou1vncF5rKygVKec3um8
2:reboot to fastboot again:
3:and flash stock recovery:
Code:
Code:
fastboot flash recovery_ramdisk recovery_ramdisk.img
4: Reboot to stock recovery by vol+ and power button.
5:.Do a factory reset and Reboot system.
6:enjoy
Click to expand...
Click to collapse
Working!!! I love you men!!!
VZ Power said:
I have EMUI 8 but i flash a bad files and i have this error!
Click to expand...
Click to collapse
Factory reset in stock recovery it will solve that thing. or factory reset in oreo twrp maybe working.
VZ Power said:
Working!!! I love you men!!!
Click to expand...
Click to collapse
:good: :good: :good:
Any method for root?
VZ Power said:
Any method for root?
Click to expand...
Click to collapse
magisk Root
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
TWRP - 3.3.1-0 For Huawei MediaPad M3 Lite 8/10
Officially Supported Devices :
Huawei MediaPad M3 Lite 10 : ( code name Bach ) : BAH-AL00/BAH-L01/BAH-L09/BAH-W09
Huawei MediaPad M3 Lite 8 : ( code name Chopin ) : CPN-AL00/CPN-L0J/CPN-L09/CPN-W09
Instructions :
1. unlock bootloader
3. unlock OEM on Developer options
3. enter on bootloader mode :
( switch off your device then keep pressed volume down key when plug to USB cable )
4. flash TWRP 3.2.0-0 recovery using the following command : "fastboot flash recovery twrp_3.2.0-0.img"
4.1. Update TWRP to 3.3.1-0 ONLY if your device run Android Pie ( LOS 16.0 )
5. reboot to recovery ( please check this info after TWRP was installed - and before take any actions )
Downloads :
TWRP 3.2.0 - intended to be installed on stock Huawei Firmware Android N ( but only for install LOS 16.0 )
( This is the first TWRP which must be installed on your device running EMUI 5.x Android N )
twrp_3.2.0-0.img MD5: 201476ac16a613da42acbf9a36d78c79
TWRP 3.3.1 - intended to be used with LineageOS 16.0 Android Pie !
( You must use TWRP 3.2.0-0 to flash LOS 16.0 - later you can update to TWRP 3.3.1-0 )
twrp_3.3.1-0.img MD5: 967f55ab71a755f2635e7b990dcc3922
Source :
kernel source : https://github.com/Huawei-Dev/android_kernel_huawei_bach
Credit :
TeamWin - TWRP
Mention :
TWRP for Huawei MediaPad M3 Lite 8 (CPN) was fixed with help of @Lothgar & @fallensoldier.
Thank you guys for your help !
Best regards !
*** reserved ***
Thanks! does it support CPN-L09 as well?
BAH-W09 ?
helicon said:
Thanks! does it support CPN-L09 as well?
Click to expand...
Click to collapse
It's only for Huawei MediaPad M3 Lite 10 ( code BAH/BACH ) !
The4anoni said:
BAH-W09 ?
Click to expand...
Click to collapse
Yes, it's shoud working on all Huawei BAH devices : MediaPad M3 Lite 10 !
There is 3 devices MediaPad M3 Lite 10 code : BAH-AL00, BAH-L09 & BAH-W09 !
I can't test it on BAH-W09, therefore it is not specified in the title.
BTW, I'm working on Android 9 Pie with porting LOS 16.0 to BAH-AL00/L09, I don't know if will working also on BAH-W09 because this device has not the same kernel regarding Huawei kernel source !
Hey.I have HUAWEI MediaPad M3 Lite 10 BAH-L09. You can write how to properly unlock the bootloader.
gucio1976 said:
Hey.I have HUAWEI MediaPad M3 Lite 10 BAH-L09. You can write how to properly unlock the bootloader.
Click to expand...
Click to collapse
Sorry, I can't because it's not for free ! You should check on Google for something like this : https://www.getdroidtips.com/unlock-bootloader-huawei-smartphone/
I just used the tool provided from Ministry Of Solutions and it's working well for unlock bootloader !
Good luck !
Android Pie on my Huawei MediaPad M3 Lite 10 :
Waaao, nice job!!!
How to get it please?
Thx!
pipolas said:
Waaao, nice job!!!
How to get it please?
Thx!
Click to expand...
Click to collapse
Hi !
Unfortunately is not yet ready, I still have to work on : sensors, camera & data LTE.
After that, I will upload it here for who wants to test/use it
Alright, thanks for the update !
I will be able to test it on my BAH-W09 (the Mediapad M3 lite 10 wifi, french version). Not afraid of bricking it.
Good luck with sensors, camera and LTE ! I'll check this thread often in the next weeks
I have an unlocked bootloader. You can do it one step at a time, write how to upload TWRP.
gucio1976 said:
I have an unlocked bootloader. You can do it one step at a time, write how to upload TWRP.
Click to expand...
Click to collapse
Into OP you have a "download" section for download TWRP and also you have a "Instruction" section where it writes step by step how to install TWRP on your device .... what you need more
I have installed twrp_bach.img:good:
Is this android 7th stock is the original, https: //github.com/Huawei-Dev/android_kernel_huawei_bach. You can install it from TWRP ... this tablet.
??
gucio1976 said:
I have installed twrp_bach.img:good:
Is this android 7th stock is the original, https: //github.com/Huawei-Dev/android_kernel_huawei_bach. You can install it from TWRP ... this tablet.
??
Click to expand...
Click to collapse
Yes; it's stock Huawei kernel for our device downloaded from here : https://consumer.huawei.com/en/open...Type=openSourceSoftware&pageSize=10&curPage=1 !
Unfortunately, it will not work ... you should ask Huawei why they release source code of kernel in this bad way !
To make it booted I applied a bunch of patches ... but will not boot on stock Huawei ROM, just only on Custom ROMs !
I mean, how would this android 7 break now, then how to recover it. It means to install the renewal, because the original recovery I removed, now has TWRP. Can you upload the original recovery again and install Android 7 original.:cyclops:
https://www.blogthetech.com/flash-file-huawei-mediapad-m3-lite-10-firmware-download-stock-rom/
https://huaweiflash.com/how-to-flash-huawei-mediapad-m3-lite-10-stock-firmware-all-firmwares/
https://zfirmware.com/update-huawei-mediapad-m3-lite-to-android-7-0-nougat/
http://www.gsmflashweb.com/huawei-mediapad-m3-lite-10-firmware-file-download/
I am sorry for my English translating google translator.
gucio1976 said:
I mean, how would this android 7 break now, then how to recover it. It means to install the renewal, because the original recovery I removed, now has TWRP. Can you upload the original recovery again and install Android 7 original.:cyclops:
https://www.blogthetech.com/flash-file-huawei-mediapad-m3-lite-10-firmware-download-stock-rom/
https://huaweiflash.com/how-to-flash-huawei-mediapad-m3-lite-10-stock-firmware-all-firmwares/
https://zfirmware.com/update-huawei-mediapad-m3-lite-to-android-7-0-nougat/
http://www.gsmflashweb.com/huawei-mediapad-m3-lite-10-firmware-file-download/
I am sorry for my English translating google translator.
Click to expand...
Click to collapse
Here it is :
RECOVERY_stock_Android7_HuaweiMediaPadM3Lite.zip MD5: cc8ef0d325f63d1c0f4761345bf77f32
I just managed to fix Sensors on LineageOS 16, Android Pie :
Now I'm working on enable Camera ...
surdu_petru said:
I just managed to fix Sensors on LineageOS 16, Android Pie :
Now I'm working on enable Camera ...
Click to expand...
Click to collapse
Huh - you have Lineage OS working on the Mediapad M3?? If there is such a miracle, please do share!
bejam said:
Huh - you have Lineage OS working on the Mediapad M3?? If there is such a miracle, please do share!
Click to expand...
Click to collapse
Yes, currently it's running on my Huawei MediaPad M3 Lite 10 !
I'm hard working to fix camera ... but I'll release a test version soon. Thanks for understanding !
Hello guys,
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
>>>WIP Port of Emui 9.1 for P10 Lite <<<
Description
Code:
[CENTER]Is it possible to boot Emui 9 from Kirin 659 devices on P10 Lite with some bugs. Me with the help of my team did this but we are still working on the flashable zip... some bugs are squashed like audio, microphone, video recording and sim recognition. We hope to release this zip soon, for now we are providing you a guide for booting P smart's Emui 9.1 on this device without our fixes.[/CENTER]
Warning
Code:
[CENTER]For now there is a lot of risk by doing this, so read everything I write. I am not responsible in case you brick your device. DON' T try this to another hi6250 device like P8 Lite 2017 as it is not supported right now.[/CENTER]
Requirements
Code:
[CENTER]* Unlocked bootloader with TWRP
* Unlock code or nvme hack installed
* A bit of patient[/CENTER]
Bugs
Code:
[CENTER]* RIL
* Audio
* Frontal camera
* Video recording
* Microphone
* Proximity sensors
* A weird blue screen before getting in to system[/CENTER]
Guide
Here we go with the hard part !
First of all make a TWRP backup of every partitions, /data backup is optional but it is always recommended
*** How to install Emui 9 ***
Flash via TWRP FIG-LX1 oeminfo, make sure you download the correct version for your device(single/dual)
Extract FIG-LX1 firmware repair in a folder called "dload" in your sd card
Here is an example:
Code:
[CENTER]PATH: SdCard/dload
*** Inside the dload folder ***
../FIG-L11_hw_eu/
../FIG-L31_hw_eu/
../update_sd.zip
[/CENTER]
Then flash your firmware by pressing vol buttons and power button for 10s
Wait for installation and boot it
Right now you can enjoy Emui 9 !
*** How to go back Emui 8 ***
Flash P10 Lite Oeminfo
Flash a P10 Lite firmware using erecovery, dload or huru
Downloads
Code:
[CENTER][URL="https://sourceforge.net/projects/darkjoker360-developements/files/Huawei/P10%20Lite/Emui%209%20Port/P%20smart%20OEMINFO/"]P smart Emui 9 OemInfo[/URL]
[URL="https://sourceforge.net/projects/darkjoker360-developements/files/Huawei/P10%20Lite/OemInfo/"]P10 Lite Oeminfo[/URL]
[URL="https://androidhost.ru/2AUo"]FIG-LX1 9.1.0.115(C432) firmware[/URL][/CENTER]
Credits
My team: Me, @DiavoloTentatore and WAPEETY
Screenshot are attacched below or in screenshot section.
Soon we will release a specific Emui 9.1 flashable zip for P10 Lite(WAS-LX1A 9.1.0.500(c432port) ) here, this right now is intended to be for testing purposes !Regards
XDA:DevDB Information
Emui 9.1 porting for P10 Lite, ROM for the Huawei P10 Lite
Contributors
DarkJoker360
Source Code: http://github.com/DarkJoker360
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
ROM Firmware Required: Unlocked bootloader and TWRP
Based On: EMUI
Version Information
Status: Testing
Current Beta Version: 9.1.0
Beta Release Date: 2019-06-24
Created 2019-06-24
Last Updated 2019-06-24
*** Reserved ***
If u see in my screenshots there is a detected sim card in fact they are from the build that we are working on !
Probaly the official Emui 9.1 will arrive here soon by Huawei, for now let's give some preview with these test stuff, also i ll make it for P8 lite 17 as it won't arrive there.
Ohhhh, its good to hear that. I wanted to change my android 7 rom to something new like 8. But all roms are one year old and have some bugs - like audio stops with locked screen, dont recognise simcard etc. Im waiting and God bless you people!!
Little problem, You putted Dual Sim OEMInfo into .rar, no .zip so there's no way to flash it.
Nice job, waiting stable build.
So, my P10 has booted with this one. I've instaled it just to check if I'll be able to boot Pie custom roms over it.
No, I didn't.
TWRP works great but after installing anything (dotOS by DarkJoker360 in my case) phone booted only to "Your device is unlocked" screen. Then it reboots. But I guess it's EMUI fault, when I'm using my WAS-LX1 firmware I have to use B370 because newer won't boot with magisk or custom roms.
Great idea anyway, I was wondering if it would work some time ago.
西村大一 said:
Should i remember the OP that placeholder posts are against XDA rules?
Click to expand...
Click to collapse
The zip is in WIP phase, other stuff is there.
This work is indeed revolutionary .. keep up the good work guys .. one question though .. will the Mate 10 Lite get some of this love ? I mean it's a hi6250 device and it's not getting Pie .. i'm up if you need testers on the mate 10 lite ... Thanks and keep it up
mazen.omar said:
This work is indeed revolutionary .. keep up the good work guys .. one question though .. will the Mate 10 Lite get some of this love ? I mean it's a hi6250 device and it's not getting Pie .. i'm up if you need testers on the mate 10 lite ... Thanks and keep it up
Click to expand...
Click to collapse
On mate 10 lite as far I know promity sensor is working but camera si fully broken.
NOTE: P10 Lite, P8 Lite 2017, Mate 10 Lite users can follow this guide but bugs are different from p10 lite. Expecially in P8 Lite 2017 that there is touch broken.
DarkJoker360 said:
The zip is in WIP phase, other stuff is there.
Click to expand...
Click to collapse
i am also looking forward to EMUI 9.1 on p10 lite. currently running OmniROM from OpenKirin and it has been reliable minus trying to use poweramp/youtube and waze at the same time. and in tokyo's confusing streets, i need Waze.
Great job, but too much bugs, Iwait better rom...Thanks
an innocent ETA question might be fine, two innocent questions invalidates the first innocent one and makes it look ugly so ... was it too complicated?
in short...
ETA requests are never comfortable for any developer who`s working for free so please take this into consideration before airing them.
a post was deleted and another one edited so that we can have a friendly atmosphere
thanks for understanding!
So i successfully installed it .. camera doesn't work , speakers doesn't work , data wiped , bootloader locked (wut ?) .. so same as people reported already bugs are the same at least on the Mate 10 Lite .. but one question though .. why did the bootloader get locked again ? even on Fastboot it shows "Locked" in green and not "Relocked" .. anyway .. thanks again for your hard work guys and keep it up
Hello,
I also tried on matte 10 lite.
the only bug that I bypass is the sound. (copy audio in 8.0 of your original ODM / ECT / AUDIO and pasted in emui9.1 and the sound works).
* for the mobile data it says no service in reality it will seem that it just activates the data because in the settings all is ok apn, sim, no of the network he sees everything. (in emui8.0 you just had to copy NV.BIN, it is mnvm2: 0 / modem_nv / nv.bin and paste it).
But in emu9.1 seems to be deleted or hidden or otherwise.
* I do not have the knowledge to read this file.
I hope to find something else.
Wow, amazing work guys, I never even thought of this being possible. Keep up the great work!
It's been more than a month. Any progress? Because if we decide that the main goal of this thread, an EMUI9 port, a working one is not achieved, this thread can be considered an WIP and afaik these are against XDA rules. For all the moderators, don't delete my post. I believe i have justified my argument, and in now way, shape or form is a question about ETA.
西村大一 said:
It's been more than a month. Any progress? Because if we decide that the main goal of this thread, an EMUI9 port, a working one is not achieved, this thread can be considered an WIP and afaik these are against XDA rules. For all the moderators, don't delete my post. I believe i have justified my argument, and in now way, shape or form is a question about ETA.
Click to expand...
Click to collapse
I am providing just the fixes in a while.
I am busy with ohther warsaw's developements.
You sir may have made a mistake. Too many ROMs mean no time to work on all of them. So dial back and keep only one or two ROMs because there are simply not too many users who have an unlocked bootloader, and those who do either want EMUI 9 or a small variety of aftermarket ROMs like RR, Omni or Lineage.
Why do you feel entitled to tell the guy what to do? He's only doing this in his free time out of love for development and he expects nothing in return. You're in no place to make absurd demands on how he should manage his time, stick to your own lane.
Closed at OP request.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hi All
This is OTA Update of Mi A3 April 2020
Android 10 V11.0.14.0.QFQMIXM
Steps:
Copy the file to External SD Card
Reboot to recovery
and Apply update from SD card
XDAevDB Information
[Recovery ROM] Android 10 Update , ROM for the Xiaomi Mi A3
Full Rom Link (Download) Previous Links Broken (G drive & One drive) 1.23GB
http://www.mediafire.com/file/l9p3uuw6oksgv7j/V11.0.14.0.QFQMIXM.zip
Small OTA File :- 32MB
Thank You @Rajendran Rasa for Small OTA File
https://android.googleapis.com/packages/ota-api/xiaomi_laurelsprout_laurelsprout/80ca9ea2f649f2783060c0205e3641980eba5366.zip
XDA:DevDB Information
Stock Android 10 Rom V11.0.14.0.QFQMIXM, ROM for the Xiaomi Mi A3
Contributors
sunny3503
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
ROM Firmware Required:
Version Information
Status: Stable
Current Stable Version: 10
Stable Release Date: 2020-04-23
Created 2020-04-26
Last Updated 2020-04-26
Official OTA size is 32MB but this file is of 1.2GB. Why is it?
theankitkulkarni said:
Official OTA size is 32MB but this file is of 1.2GB. Why is it?
Click to expand...
Click to collapse
It's the full ROM... The smaller OTA file is the update to Android 10 only.
LenAsh said:
It's the full ROM... The smaller OTA file is the update to Android 10 only.
Click to expand...
Click to collapse
We just need that smaller (32.69 MB) OTA file as we are already on the build V11.0.11.0 QFQMIXM.
sunny3503 said:
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
ROM Firmware Required: V11.0.11.0 QFQMIXM
Version Information
Status: Stable
Current Stable Version: 10
Stable Release Date: 2020-04-23
Created 2020-04-26
Last Updated 2020-04-26
Click to expand...
Click to collapse
Hello, i'm on Android 9 EU version, anyone knows if i can flash like this, so simply like this or it's only for those who have "V11.0.11.0 QFQMIXM". Thanks, regards.
Niclass said:
Hello, i'm on Android 9 EU version, anyone knows if i can flash like this, so simply like this or it's only for those who have "V11.0.11.0 QFQMIXM". Thanks, regards.
Click to expand...
Click to collapse
you can flash nothing like that as i mentioned i am updating the thread now.:good:
Do i need to flash 11.0.11 to flash this?
mronak02 said:
Do i need to flash 11.0.11 to flash this?
Click to expand...
Click to collapse
You can flash directly no need to flash 11.0.11 thumbs up:good:
does it require stock recovery or twrp would work?
Im on latest eu build. Update with stock recovery did not work.
propi62 said:
Im on latest eu build. Update with stock recovery did not work.
Click to expand...
Click to collapse
its for global
LenAsh said:
It's the full ROM... The smaller OTA file is the update to Android 10 only.
Click to expand...
Click to collapse
Why would we flash whole ROM while we're already on Android 10? Can we get a link to download 32MB update package?
Couldn't update..
SyeedAhmed said:
its for global
Click to expand...
Click to collapse
I am on global, (Android pie) but update from sd card doesn't work.
E: Error in /sideload/package.zip. (status 1)
(Installation Aborted)
Any advice ?
theankitkulkarni said:
Why would we flash whole ROM while we're already on Android 10? Can we get a link to download 32MB update package?
Click to expand...
Click to collapse
You just install it via SD card like the first post said
LenAsh said:
It's the full ROM... The smaller OTA file is the update to Android 10 only.
Click to expand...
Click to collapse
sunny3503 said:
Hi All
This is OTA Update of Mi A3 April 2020
Android 10 V11.0.14.0.QFQMIXM
Steps:
Copy the file to External SD Card
Reboot to recovery
and Apply update from SD card
XDAevDB Information
[Recovery ROM] Android 10 Update , ROM for the Xiaomi Mi A3
Rom Link (Download) Previous Links Broken (G drive & One drive)
http://www.mediafire.com/file/l9p3uuw6oksgv7j/V11.0.14.0.QFQMIXM.zip
XDA:DevDB Information
Stock Android 10 Rom V11.0.14.0.QFQMIXM, ROM for the Xiaomi Mi A3
Contributors
sunny3503
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
ROM Firmware Required:
Version Information
Status: Stable
Current Stable Version: 10
Stable Release Date: 2020-04-23
Created 2020-04-26
Last Updated 2020-04-26
Click to expand...
Click to collapse
Can you provide us the smaller (32.69 MB) OTA file as we are already on the build V11.0.11.0 QFQMIXM.I have only access to 2G network,I hope now you can understand where from I belong in India. Downloading full ROM will take me 2 days.
Zeeshan Hussain Yatoo said:
Can you provide us the smaller (32.69 MB) OTA file as we are already on the build V11.0.11.0 QFQMIXM.I have only access to 2G network,I hope now you can understand where from I belong in India. Downloading full ROM will take me 2 days.
Click to expand...
Click to collapse
i cant give my word regarding the ota file (32mb) You Can Try to check in Settings-System Update-check for update as of now i can't provide the 32mb OTA file. if i got the ota file i will share it ASAP
Zeeshan Hussain Yatoo said:
Can you provide us the smaller (32.69 MB) OTA file as we are already on the build V11.0.11.0 QFQMIXM.I have only access to 2G network,I hope now you can understand where from I belong in India. Downloading full ROM will take me 2 days.
Click to expand...
Click to collapse
https://android.googleapis.com/pack.../80ca9ea2f649f2783060c0205e3641980eba5366.zip
Rajendran Rasa said:
https://android.googleapis.com/pack.../80ca9ea2f649f2783060c0205e3641980eba5366.zip
Click to expand...
Click to collapse
Thx man
Hi! I installed this via twrp and now I have bluetooth issues. I have redmi airdots and if I listen something and having wifi on/connected, it drops the connection in every 20-30 seconds... Using custom rom (crdroid 6.5) there is no issue withbt/wifi. There is no issue if I have bt earphones connected and using 4g. Any suggestions? Thanks!
Rajendran Rasa said:
https://android.googleapis.com/pack.../80ca9ea2f649f2783060c0205e3641980eba5366.zip
Click to expand...
Click to collapse
It worked. Thanx man