{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Introduction
After a year of experience I introduce to you a completely new Soda sparkling experience!
Release schedule will change: upstream version is abandoned, new official release every 2-4 weeks, nightlies every time new changes are made (see telegram channel).
Talking about this year - now my kernel is totally different. I've learned a lot, Soda is developed better than ever before. I'm also using my own toolchain.
Compatibility
Any LineageOS based ROM with vendor partition support.
Downloads
download from AFH
Installation:
- download kernel zip and check MD5!
- boot into recovery
- (flash your ROM if you flashed any sort of custom mods before)
- flash the zip
- reboot to the system and taste the madnesss
Always remember to flash the kernel on clean ROM!
The Soda Kernel
Features:
Known issues:
- A well known speaker/earpiece problems (it's not exactly my fault lol)
FAQ:
Could you add XYZ feature?
I will not add features I personally think are useless. I can only promise I'll take it into consideration. If you're so single-minded about that just fork my repo and pull request - I'll pick it gladly.
"My phone freezees help meeee!!!!!!!11oneoneone..."
Description, logcat, kmesg or GTFO.
Could your changes damage my device?
I don't take any responsibility for broken devices, firing from work or nuclear wars. It's a hobby project maintained in my free time. I carefully pick up changes not to mess anything up and add features that are checked and provided to work correctly. There is a small chance you could loose your phone completely, typically it will just freeze and reboot.
Where is version for MIUI/EAS?
MIUI won't be supported because Xiaomi haven't updated their repo for a long time. Building for MIUI would bring more problems than advantages.
EAS is in testing stage and will be released soon.
Remember to hit like button if you like my work!
Telegram:
--- Invite Link ---
Nightlies:
--- Telegram Channel ---
Donation:
I have spent lots of hours debugging and testing. I'm developing this project in my free time but I'm putting my heart and soul into it. I'll be glad to see you appreciate my work!
Please, consider buying me a coffee
Thanks to:
LineageOS team @Lord Boeffla @ZaneZam @bgcngm @frap129 #engstk @arter97 @jollaman999 @franciscofranco @TheCrazyLex @sultanxda
Special thanks to @SkiesOfAzel for this fantastic Soda logo!
XDA:DevDB Information
The Soda Kernel, Kernel for the Xiaomi Mi 5
Contributors
xNombre
Source Code: https://github.com/xNombre/android_kernel_xiaomi_msm8996
Kernel Special Features:
Version Information
Status: Stable
Created 2018-05-12
Last Updated 2018-05-27
Reserved
Changelog:
Code:
version 0.2:
- [B]more than 100 fixes for our architecture[/B]
- passing SafetyNet
- disabled touchboost
- disabled useless drivers
- muted all dmesg spam
- various optimizations
- standard frequencies on lite version
- removed bootanim and custom thermal
version 0.1:
- initial release
- O2 compiled
- updated android drivers
- upstreamed kernel
Upcoming release:
Code:
all custom stuff
Reserved
Please support miui oreo.
Can you please reverse the boot animation
Why took it so long, thanks try it soon
Thank you Sir
Latest aosip won't boot, damn my bootanime hijacked
This kernel is not for ROMs which dont have vendor partition,
Perhaps we request to Dev to compile for us like Omni or aosip, or comming aospa
@xNombre I confirm working on pixel experience rom,
But the frequency was set back to 1.8 GHz, as compared to default darkness kernel 2.15 ghz,
One more thing, little cores min frequency not locking at 307 mhz, always going back to 1363 mhz
Any fix?
Thanks a ton bro for a fresh kernel
Using Gcc version
imrananis said:
@xNombre I confirm working on pixel experience rom,
But the frequency was set back to 1.8 GHz, as compared to default darkness kernel 2.15 ghz,
One more thing, little cores min frequency not locking at 307 mhz, always going back to 1363 mhz
Any fix?
Thanks a ton bro for a fresh kernel
Click to expand...
Click to collapse
I guess it's msm touchboost. Try not to touch your screen for ~10 seconds and min freq should set to 307mhz.
I want lineage boot back
I was installed this kernel with Viper OS rom, but the wifi connection is not working then I have to switched back to the soda kernel b1.2.1
kashaharamay said:
I was installed this kernel with Viper OS rom, but the wifi connection is not working then I have to switched back to the soda kernel b1.2.1
Click to expand...
Click to collapse
It's Oreo!
xNombre said:
It's Oreo!
Click to expand...
Click to collapse
The viperos is nougat rom man!
xNombre said:
It's Oreo!
Click to expand...
Click to collapse
kashaharamay said:
The viperos is nougat rom man!
Click to expand...
Click to collapse
There's the Nougat version that has been around for a long time, and also a new Oreo version (from beginning of last month, so new is relative).
I think @xNombre meant that his kernel is made for Oreo ROMs only, and was referring to the Nougat ViperOS version, as this is the one everybody uses.
Hello, new version is out.
Phone is now buttery smooth and much better on battery performance
Take it here: https://www.androidfilehost.com/?fid=890278863836286488
#EDIT: uploaded hotfixed version!
xNombre said:
Hello, new version is out.
Phone is now buttery smooth and much better on battery performance
Take it here: https://www.androidfilehost.com/?fid=818222786056031486
Click to expand...
Click to collapse
Thank you Sir
Have you fix for AOSIP bootloop, thanks
Related
Alter_Play kernel for lenovo a7000
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
About Alter_Play
This is a custom kernel compiled by myself for lenovo a7000 aka aio_row.The kernel is based on official source code released by Lenovo OpenSource Team+tweaks and modification from my side.
the name alter play was put to my kernel randomly since short form of it and my name(Aswin Pradeep) were the same!phyco move by myself .Note that this kernel currently supports only MM(android 6.x) based roms like vibe,cm13,RR,PAC,AICP11,AOPS6.0,etc....(there are tons of roms in fact)
FEATURES:
*upstream to latest version 3.10.104
*Added thunderquake engine
*Added two new governors wheatley and alucard
*Tuned interactive governor
*Added Double Tap 2 wake
*Added sweep to wake with softbuttons
*Fixed LED notification(tested green LED working for whatsapp on RR rom)
*Modded Charging
*Tweaks to increase the amount of free ram
*tweak to reduce heating
*tried overclocking alike N kernel but it dosent seem to work(developers,i will be very thankful if u help me with it)
*Made a flashable zip for every Rom
HOW TO USE IT?
*download the kernel
*go to twrp and take a backup of boot[must] (<- restore it in case you want to go revert back to your old setup)
*flash Alter_Play_byAP.zip(TWRP 3.0.2-1 by rohan taneja is preferred)
*reboot the device,go to about phone and check if the kernel is changed,if yes you are ready to go :highfive:
WHAT IF THE ABOVE STEP DOSENT WORK?
In case if the above steps dosent work,it dosent mean that you can't enjoy the kernel.of cource you can but its a bit tricky.watch this video.(the same tool is available for windows meachines too),the zimage can be found by extracting the flashable zip.
TO CONTROL THE VIBRATOR INTENSITY DOWNLOAD THIS APP Play Store AND THEN OPEN THE MISC OPTION TO CONTROL THE VIBRATOR INTENSITY.
TO CHOOSE GOVERNORS AND ACTIVATE WAKE MODES USE KERNEL AUDITOR.
CREDITS:
@varun.chitre15 for his thunder modules
@pinnamanivenkat
@devagya awasthi
@rohan taneja
@sandeep.sethi <-this project wouldn't have happned without his priceless help and commits
@tanish2k09 <-this guy is a damn good tester
Version Information
compiler-gcc: 5.3 optimized by UBER
Status: Stable
Current Stable Version: MM
Stable Release Date: 2016-12-05
Created 2016-12-05
download link v1:HERE
download link v1.1:HERE
please share XDA link only,dont mirror the download links,updates will be released only if satisfiable download count is reached
well,thanks for using my kernel.any suggestions on it would be welcomed.Never expect me to update it on daily basis
however i will surely try to update it if a good number of users demand for it.
At the last,any donations will be welcomed with great happiness.it's a sad truth that i havent earned even a single dollar(not even single INR) till date from android development.so if u wish to motivate me,please do donate with PAYTM uing the barcode given below
barcode
final notes:
flash it at your own risk.i will not be responsible for any damages occoured nor won't promise to help you incase you messed it up
happy flashing plox!
regards:
ASWIN PRADEEP
XDA:DevDB Information
Alter_Play_byAP, Kernel for the Lenovo A7000
Contributors
aswinp222, sandeep.sethi , Rohan Taneja, devagya awasthi,tanish2k09,venkat_pinnamani
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: v1
Stable Release Date: 2016-12-06
Created 2016-12-06
Last Updated 2016-12-19
Reserved
ADDITIONAL INFORMATION.
1.Recommended recovery for flashing the kernel: HERE
2.Fast charging patch by hdhr:HERE
those who face any kind of probelms with charging are recommended to flash this patch and disable thermal in kernel auditor
3.by default led notification for missed calls is red in clolur.need green?use lightflow(pro) app and use lenovo settings.adjust with red if it failed!
UPDATE
V1.1 is out now,links above!
its more or less the same as v1 with an additional patch to boot nougat roms(thanks to rohan taneja for the patch)
NOTE
Eventhough i specified that v1.1 boots nougat roms,cant be sure of it since no roms are available to test it out right nw.However its sure that it wont work on aosp7.1.1 and pixel ui since they are based on LP kernel and Alter_Play is MM based.however am expecting a few roms like cm14.1 and RR will be released soon(?) and the kernel may work on it.ask the ROM moderator and ensure if the kernel he used is LP based or MM based.dont even try if its LP based.give a shot @ ur own risk if its MM based :highfive:
**screenshots by users could be found in comments,have a look
Link???
reserved
reserved
thx. I'll try it.
Reserved too. For Suggestions and requests.
Suggested:
1) Please don't use thunder zap app with kernel adiutor. Conflicts occur during boot. Both apps try to apply their own changes. Use thunder zap. Recommended.
Requests :
1) Intelliactive governor.
Here is a well detailed review of what I had tested.
Tried 30 minutes charging. See stopwatch and battery graph.
Tested with pre-release test builds of the kernel, so the name of the kernel is not the same.
Tested on ROM : Resurrection remix MM by @aswinp222
The kernel is awesome. Guys, make sure you check it out.
Chirag21 said:
Link???
Click to expand...
Click to collapse
links updated.U were damn fast with the reply!!thanks for the response anyhow
Sorry for that.My bad:angel:.
Anyways charging is good.Flashed fast charging patch by HDHR.
Chirag21 said:
Sorry for that.My bad:angel:.
Anyways charging is good.Flashed fast charging patch by HDHR.
Click to expand...
Click to collapse
Is the patch working for you? Because according to the patch and the screenshot that he uploaded, it was really damn fast!
However, the patch didn't work for most of us.
I noticed considerable change after I flashed the zip.Before it was really really slow & heating too much.
@el7is how's it??
I'm getting unsupported device error while flashing. Could it be a problem of my recovery ?
aswinp222 said:
@el7is how's it??
Click to expand...
Click to collapse
cm13 november patch.
http://forum.xda-developers.com/lenovo-a7000/development/rom-cm13-november-patch-a7000-t3513141
@el7is
sorry,but i asked how is the perfomance of my kernel in your rom
@emil_515 yes its possibly due to twrp version.try with the specified one or else proceed with the second step(video) it'll work
aswinp222 said:
@el7is
sorry,but i asked how is the perfomance of my kernel in your rom
Click to expand...
Click to collapse
ok sorry.
I'm experimenting more. a few days later will be decided.
@aswinp222 , couldn't find the link of the suggested recovery, help would be appreciated
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
DOWNLOAD • SOURCE
Priima+ for Gemini is designed to gain absolute battery and stability over performance, using well-tested patches from various of the most famous kernel developers around here.
WARNING:
Do NOT flash this over others custom kernels!
If you find any bugs during the experience, please report them with Logcat/kmsg/dmsg (go search if you dont know how to take them)
AKT Is supported by my kernel, so go play with it
Installation:
- Flash it in recovery
Contributors:
Code:
@bgcngm
@h2o64
@franciscofranco
@eng.stk
@flar2
Maybe I've forgot someone! If so PM me and I'll add you here! :)
XDA:DevDB Information
[KERNEL] [07/02] Priima+ Kernel [Oreo], Kernel for the Xiaomi Mi 5
Contributors
sys01
Source Code: https://github.com/FedericoBenedetti/android_kernel_xiaomi_msm8996
Kernel Special Features:
Version Information
Status: Stable
Created 2017-01-12
Last Updated 2018-03-28
Changelog [07/02]:
Code:
- Rebuilt from ground up once again
- Massive code cleanup
- Changed the way we fixed interactive (thanks @DennySPb)
- Smoothness.
- Improved deep sleep
Changelog [02/02]:
Code:
- OC for 820lite with 4 speedbins
- Fixed interactive gov lag (finally!)
- LineageOS upstream
- many fixes and upstream
- battery tuning
- boeffla wakelock blocker
- moar that I don't remember
Of course it's Oreo based, it may works on Nougat too but it's not meant to be! So do not report bugs with it.
I'm back guys!
It is overclock ?
@RyandaFT not yet
sys01 said:
@RyandaFT not yet
Click to expand...
Click to collapse
The brightness is bug when i set in middle the brightness no change
@RyandaFT i have no problem here with brightness, it change normally through the slider, even in the middle
sys01 said:
@RyandaFT i have no problem here with brightness, it change normally through the slider, even in the middle
Click to expand...
Click to collapse
Okay, i try to reflash again. But thanks
Welcome to the Party :highfive:
Finally im here with you all mate @WhyOrean
New Release Up!
- Fixed brightness
- GPU OC @652Mhz
- CPU 32GB OC @1.6/2.0Ghz(may not work, is on test)
Thanks to @WhyOrean
For devs: i made a lot of mistakes with my git, i am working to fix those wrong commit ^^
sys01 said:
New Release Up!
- Fixed brightness
- GPU OC @652Mhz
- CPU 32GB OC @1.6/2.0Ghz(may not work, is on test)
Thanks to @WhyOrean
For devs: i made a lot of mistakes with my git, i am working to fix those wrong commit ^^
Click to expand...
Click to collapse
Brightness still not fixed - keeps it on max no matter if you try to lower it.
GPU OC - OK
CPU OC - not working
Disables sim card - i mean it shows you provider, you can enter PIN but keeps saying no network available. MI account says you changed sim card and need to re-activate it.
However AnTuTu marks 133074 score
@Pedroenf missed a value with the lastest kernel, now im compiling one completely brightness fixed
I havent changed any for sim cards, and for me it's working fine
before looking into it ill wait for someonelse report (i have OC to pay attention for ^^)
thank's for the report
can you overclock mi5 64gb?thank you....
Quick fix build up:
- Fix completely brightness
- Some code fix here & there
I'll look for OC now, stay tuned ^^
i don't understand why 2 big cores says stopped(cpu-z).it is possible to fix this?after update to android 7 same problems for the beginning...
thank you...
@tasoskio it's not a problem, it's a features called MP-Decision
It's for save battery life, it's just stop big cores or little cores if you dont need them
but, when you play an heavy-app then all 4 cores will be online
tasoskio said:
i don't understand why 2 big cores says stopped(cpu-z).it is possible to fix this?after update to android 7 same problems for the beginning...
thank you...
Click to expand...
Click to collapse
i dont have mp-decision in my phone and two cores stopped.....
i believe if you overclock little the problem fix it.....
You have mp-decision if you flash my kernel as Xiaomi implemented it from 7.0
i have flash your kernel but after 2 minutes core stopped and never wake-up...
please overclock little...thank you very very much....
does f2fs works on MIUI?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
DOWNLOAD • SOURCE
Priima+ for Jason is designed to gain absolute battery and stability over performance, using well-tested patches from various of the most famous kernel developers around here.
WARNING:
Do NOT flash this over others custom kernels!
If you find any bugs during the experience, please report them with Logcat/kmsg/dmsg (go search if you dont know how to take them)
Installation:
- Flash it in recovery
Contributors:
Code:
@dianlujitao
@franciscofranco
@eng.stk
@flar2
Maybe I've forgot someone! If so PM me and I'll add you here! :)
XDA:DevDB Information
[KERNEL] [08/04] Priima+ Kernel [NOUGAT], Kernel for the Xiaomi Mi Note 3
Contributors
sys01, dianlujitao
Source Code: https://github.com/FedericoBenedetti/android_kernel_xiaomi_sdm660/
Kernel Special Features:
Version Information
Status: Stable
Created 2018-03-28
Last Updated 2018-04-08
Is this kernel for stock(global/eu) or custom roms?
dzidexx said:
Is this kernel for stock(global/eu) or custom roms?
Click to expand...
Click to collapse
Los based roms
great
Running on Resurrection Remix Rom. Working fine so far.
please fix bug in kernel, charging issue while in power-off-charging mode 5v 3A , the phone is blocked
last build dot os is fixed, thanks
Flashed it on miuipro!
But WLAN was broken. Then i read here it is only for lineage based roms.
Thanks god for backups
By the way will be there a stock rom Version?
Flashed it on dotOS
But WLAN was broken.
Same here. İt booted and I didn't see anything broken other than wifi.
For everyone that is using my kernel and got WiFi not working: you need to use LineageOS, crDroid, AOKP or RRMX
DotOS it's not updated, and doesn't allow built-in WiFi module.
(nor MIUI is supported)
sys01 said:
For everyone that is using my kernel and got WiFi not working: you need to use LineageOS, crDroid, AOKP or RRMX
DotOS it's not updated, and doesn't allow built-in WiFi module.
(nor MIUI is supported)
Click to expand...
Click to collapse
Is AEX supported?
lb729 said:
Is AEX supported?
Click to expand...
Click to collapse
Did yoy met AEX somewhere?
dzidexx said:
Did yoy met AEX somewhere?
Click to expand...
Click to collapse
androidfilehost
dzidexx said:
Did yoy met AEX somewhere?
Click to expand...
Click to collapse
Its Builded but not released by developer, For now its on test level, Maybe soon
Hi, @sys01
Have kCal support inbuilt?
dzidexx said:
Hi, @sys01
Have kCal support inbuilt?
Click to expand...
Click to collapse
Yes
Can be provided a detail of what have different this kernel Than stock one? Maybe only inbuild governor tweaks?
Priima+ Kernel for Jason, Update!
Changelog:
- Added Alucard governor (smooth enough while maintaining better battery than interactive)
- Added 300MHz step for both cluster (you can select that in EXKM or KA, be sure to disable msm_thermal first)
- Fixed fast charging
- Limited fast charging to 2.5A (better for our battery, and I WON'T change that)
- Kernel tweaked by first boot
If you don't want to mess with EXKM or KA, be sure to uninstall them before flash, and kernel will be tweaked automagically!
Enjoy!
Download Here
(Download link update also in the first page)
Running newest priima kernel since 4 days on RRemix Rom. No issues at all. All working fine. I especially like the option to set the color intensity for the display. Also alucard governor works pretty nice for me. Any suggestions for best I/O scheduler for balanced performance/battery. CFQ and ZEN gave me pretty choppy experiences. Deadline performs well but it's a bit battery heavy I think. I like the kernel over all pretty much. Thanks for the hard work.
How to use this. ???
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
DISCLAIMER
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this Kernel
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
ABOUT:
This is my personal kernel project, which I looked to be a stable kernel for daily usage, with useful features only, and to have a half term under performance and battery life for Xiaomi msm8996 devices. Inspired by projects like Flash Kernel and ElementalX Kernel
"While I am not a super star kernel developer, I do know my way around it." (Chancellor, Nathan - 2017)
PROJECT GOALS:
Keep kernel up-to-date with lastest stable Linux Kernel version (3.18.123)
Offer the user the best balance between battery life and performance
Just useful features. Features may be included only as needed (Read FAQ section to know the features that I won't add in anyway)
FEATURES:
Here are the major features of the kernel (More details on the Github repo)
Up-to-date with the latest stable Linux Kernel version (3.18.133)
Mainline Linux patches for CFQ
Several subsystems converted to use power efficient workqueues
Hides bootloader unlock from SafetyNet (can still fail through other means)
Available to flash with AnyKernel2 (thanks to @osm0sis)
Users facing features:
KCAL color control
USB Fastcharge
Adreno Idler
Boeffla Wakelock Blocker
INSTALLATION:
Boot to recovery
Flash kernel zip
Reboot
Yay! You've installed the kernel :victory:
DOWNLOADS: https://sourceforge.net/projects/kernelx-project/files/
Telegram Channel: https://t.me/KernelXChannel
Liked my work? Make a donation : http://bit.ly/hlcpereira_paypal
F.A.Q:
Q: Are you Planning to support MIUI?
1. A: No.
Q: Could you include feature x,y and z in your kernel please?
2. A: If you link me the commits or tell me what kernel you had the feature in, I can take a look at them. I won't promise that I will merge every request but I will always take it into consideration. I will NOT add:
Overclock or underclock of the CPU and GPU (Except for the cases that the device has a underclock on both or in just one, then it'll be considered)
Undervolt
Any other governors except the "kernel stock" ones
Any feature that just one or two people is going to use
Q: I'm having an issue, can you help me?
3. A: I'm not an amazing kernel developer but I will certainly try my best. First, start by reading the release posts, as I may make note of a particular issue. Also search the thread to see if I have discussed it before. If you see nothing, please provide me with a dmesg/last_kmsg and logcat, your ROM/kernel version, and a detailed description of the issue. If I can't reproduce reliably, I'm not going to fix the issue. (Extracted from Nathan Chancellor's Flash Kernel Thread)
Q: The kernel is f*cking up my battery! Plz...
4. A: Stop right there. The Kernel doesn't drain any battery, use an app like BetterBatteryStats to figure out what app is screwing with your phone. If verified the clocks are always online and on the max clock, then it'll checked out what's happen. Anyway logs are necessary.
THANKS TO:
@nathanchance
@flar2
@franciscofranco
@LuK1337 and Mi5Devs
@xNombre
Any other developer that I might forgot
ADDITIONAL NOTES:
ABOUT KERNEL USAGE IN OTHER ROMS THAT ARE NOT MINE:
You are free to use the kernel if you want. The only thing that I'll request to do it's to keep the kernel name. If you have modified something, just add a "-Mod" in the final of the kernel name or anything that states that the kernel has been modified, not by me, but by ROM maintainer.
XDA:DevDB Information
KernelX, Kernel for the Xiaomi Mi 5
Contributors
Hlcpereira
Source Code: https://github.com/Hlcpereira/kernel_xiaomi_msm8996
Kernel Special Features:
Version Information
Status: Stable
Stable Release Date: 2018-09-17
Created 2018-09-18
Last Updated 2019-02-03
Reserved #1
Reserved #2
Interesting! Finally a kernel that focuses on stability and battery life.
I'm hoping for some good releases, good work!
Is it a EAS or HMP kernel?
Shicheng Zhou said:
Is it a EAS or HMP kernel?
Click to expand...
Click to collapse
As stated on thread title, it's HMP. I'm planning to do an EAS version soon.
Does It work over Nougat? Thanks.
Is this kernel has the pie support, as pie caf tag integrated
DLG32 said:
Does It work over Nougat? Thanks.
Click to expand...
Click to collapse
learn to read carefully
drpraveen said:
Is this kernel has the pie support, as pie caf tag integrated
Click to expand...
Click to collapse
It's working on Pie ROMs as for now, but with the rebase of all stuff for Pie, the version for Pie and Oreo will be separated from one and other soon.
Kernel Update!
Just a little update with upstreamed kernel version (3.18.122)
Link on OP.
Hlcpereira said:
Kernel Update!
Just a little update with upstreamed kernel version (3.18.122)
Link on OP.
Click to expand...
Click to collapse
Thank you for your work and update , its seems your kernel is very good
Kernel Update!
- Upstreamed to 3.18.123
- Merged LA.UM.6.6.r1-09800-89xx.0 tag
- Included Adreno Idler
- Enabled Westwood TCP
Also released EAS version.
Download link: https://sourceforge.net/projects/kernelx-project/files/gemini
Hay anyone flashed in on PIE? My wife using semi gsi pie
fuxmen said:
Hay anyone flashed in on PIE? My wife using semi gsi pie
Click to expand...
Click to collapse
Flashed on ArrowsOS - HMP Pie. Stable, but some lagging not sure if ROM or Kernel or both combo not good. At least Touchboost and CPU boost helped.
fuxmen said:
Hay anyone flashed in on PIE? My wife using semi gsi pie
Click to expand...
Click to collapse
@Jonas Cardoso have tested on LOS 16.0 both HMP and EAS. All them booted and seems to be fine.
Will we have this kernel to official PE rom?
chandonmiaxda said:
Will we have this kernel to official PE rom?
Click to expand...
Click to collapse
Yep
Will it works with xiaomi.eu global rom?
First FAQ...
GGelmi
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
sleepy kernel • Xiaomi Mi A2 Lite
sleepy kernel is a kernel that has been available on Telegram for a while now, this kernel used to be the stock kernel for POSP a rom which I used to maintain.
sleepy only has a couple of features and feature requests won't be accepted and or looked into as this kernel will only be maintained in the form of upstream merges etc, the main reason behind this is because I don't use daisy and or sakura anymore so I don't feel like spending any more time on this than needed.
This kernel is based on the kudproject msm_4.9 kernel base
Features:
DT2W for Goodix_TS and FTS_TS Users
Fingerprint gestures (for FPC and Goodix users)
Faster fingerprint unlocking
WireGuard VPN acceleration
Compiled with the latest Proton Clang 13 toolchain
ThinLTO optimizations for performance
CPU Governors: schedutil, powersave and performance.
Efficient frequencies (thanks to Laststandhere)
CPU overclock, technically it's not an OC as i just switched the bin to 7 from 2 so it uses the native clocks of sd626 which is a better binned 625 (thanks Mochi {Jebaitedneko})
CPU undervolt ^
exFAT support (thanks Arter97)
Use /dev/srandom instead of /dev/random
Minimal debugging to prevent overhead and to improve general performance
PRLMK a custom memory killer made by my buddy darkhzy_kh
Source: Couchpotato-sauce/kernel_xiaomi_sleepy
Toolchain: kdrag0n/proton-clang
Download https://github.com/Couchpotato-sauce/kernel_xiaomi_sleepy/releases/tag/r254
MD5SUM: e7b1ce513f357fe2e1442a3e06cbceb2
SHASUM: d4a3a9bf5954f2de615420f29e246aaad0e0dc12
please refrain from tagging me on telegram as I wont be fixing any issues which may occur when you run this kernel, as always you do this at your own risk and if you do happen to run into an issue please make sure your not using any mods and or dirty flashed a rom.
also this post won't be updated its simply here to inform you about the existence of this kernel for the people that didn't know about its existence yet.
i don't use daisy anymore (i still own the phone but i switched to the pixel 5) so you can motivate me to keep merging updates and stuff by donating to my paypal over here!
Major thanks to:
sleepy - YouTube (he is the reason why the kernel is named the way it is)
laststandrighthere (for his work on Vince)
darkhzy_kh (for his work on PRLMK and other contributions he made)
krasCGQ (for his amazing kernel base)
SebaUbuntu (for the msm8953 common kernel)
spac3b0y (exit.c)
and of course the others which helped with bringing the kernel to the point where its at right now.
For anyone that's curious POSP will not receive any future updates from me due to college and the fact that i am getting a new phone, I am extremely thankful for the support you guys gave me and I had a ton of fun maintaining the rom besides in the end then but oh well.
Owo, finally on xda too
Its_Vixano said:
Owo, finally on xda too
Click to expand...
Click to collapse
haha yes, revengeOS by gioPROYSL wen
Nice kernel... Smooth & fast. Battery also great
yash_patil2k5 said:
Nice kernel... Smooth & fast. Battery also great
Click to expand...
Click to collapse
always nice to hear you like the kernel, there might be an update later this weekend when proton-clang gets updated so keep an eye out on the telegram group in the github release
yes
How working WiFi with this kernel (is MIMO or/and AC) enabled?
Can I use this Kernel with Syberia (Android 11)?
Falcon_X said:
Can I use this Kernel with Syberia (Android 11)?
Click to expand...
Click to collapse
yep
cooltronic said:
How working WiFi with this kernel (is MIMO or/and AC) enabled?
Click to expand...
Click to collapse
What do you mean?
Compatible with stock rom? I am planning to come back due to the camera
lacia-chan said:
What do you mean?
Click to expand...
Click to collapse
I saw some screenshots confirming that the A2 Lite can support 866 Mbps Link Speed with custom kernels.
I have custom ROM, but my phone has only 150 Mbps Link Speed, and I'm searching the kernel which can support 866 Mbps because it may be possible and the processor is supporting ac, but it may be fake
For the moment works like charm on havoc os a10 i was facing drain battery and has improved thanks to this
Can I have ur telegram group link, I lost it
yoonzal said:
Can I have ur telegram group link, I lost it
Click to expand...
Click to collapse
laciakerneltg on telegram
Can work in Pixel Experience rom???
Can I use this kernel with the latest stock ROM V11.0.18.0 ?
edddie23 said:
Can I use this kernel with the latest stock ROM V11.0.18.0 ?
Click to expand...
Click to collapse
No, this kernel is for custom android 10 and 11 roms.
Changelog:
- Up-streamed to 4.9.261
- Merged kudproject changes
- Updated proton-clang to latest (https://t.me/proton_clang/107)
Download: https://github.com/Couchpotato-sauce/kernel_xiaomi_sleepy/releases/tag/r245
MD5SUM: c6edcab3c1aec710a3b4200209c0cf03
SHASUM: cf9f8c406aea6bea99ef64807b52187400f09403