This is ONLY for the H932. There are no ASSERT checks, so you better pay attention. If you flash this on any other model, you will brick your phone.
Also, I was in a hurry so there is no progress indicator. Just let it flash, you will know when it is done -- it doesn't take THAT long.
So you have used lafsploit and would like to have Oreo back -- got ya covered.
Flash this zip: link in TWRP.
Code:
SHA256: [B]931f3b424c8d5af3bb6b88863fc8659fa9c4ffef87f53b3eb3f33d4670debd58[/B]
You can dirty flash it over 10d.
It is 100% stock. The only change I made was removing recovery-from-boot.p, but it appears that isnt enough to keep recovery from getting wiped if you dont flash Magisk.
After flashing this, you MUST flash Magisk again or you will lose TWRP and root, and have to use lafsploit all over again.
-- Brian
Ignore
I downloaded the zip went to twrp tried to flash got error 6 trying to flash so I wiped all partitions including system now I lost twrp and can't even get to download mode only getting fastboot mode with 2 options restart or power off I'm assuming I lost download mode. Lol any suggestions on how to get download mode @ Brian or anyone who can help? Haha thanks appreciate the help and support!?
Fix uploaded.
-- Brian
Excellent work good sir. Now just have to hope some ROM devs start supporting the H932 variant.
tattedup said:
I downloaded the zip went to twrp tried to flash got error 6 trying to flash so I wiped all partitions including system now I lost twrp and can't even get to download mode only getting fastboot mode with 2 options restart or power off I'm assuming I lost download mode. Lol any suggestions on how to get download mode @ Brian or anyone who can help? Haha thanks appreciate the help and support![emoji106]
Click to expand...
Click to collapse
Have you tried both options to get into DL mode? With hardware keys and power off vol up and plug in?
Sent from my [device_name] using XDA-Developers Legacy app
Sooo I flashed the zip, now trying to get back into recovery mode and it just says "No Command" on the screen when doing adb reboot recovery.
Josh McGrath said:
Have you tried both options to get into DL mode? With hardware keys and power off vol up and plug in?
Click to expand...
Click to collapse
Haha!! I'm a noob!! Lol I kept doing vol down!! ?? Thanks bro!??
tattedup said:
Haha!! I'm a noob!! Lol I kept doing vol down!! [emoji106][emoji106] Thanks bro![emoji23][emoji23]
Click to expand...
Click to collapse
Glad you're not bricked . We all start somewhere.
Sent from my [device_name] using XDA-Developers Legacy app
---------- Post added at 09:08 PM ---------- Previous post was at 09:07 PM ----------
Josh McGrath said:
Glad you're not bricked . We all start somewhere.
Sent from my [device_name] using XDA-Developers Legacy app
Click to expand...
Click to collapse
When you download the file, what's the file name? Is a bunch of random letters and in bin format? I may have issues going on here
Sent from my [device_name] using XDA-Developers Legacy app
Josh McGrath said:
Glad you're not bricked . We all start somewhere.
Sent from my [device_name] using XDA-Developers Legacy app
---------- Post added at 09:08 PM ---------- Previous post was at 09:07 PM ----------
When you download the file, what's the file name? I may have issues going on here
Click to expand...
Click to collapse
H93220k.zip
But I think Brian uploaded a fix for it
Fixed
Josh McGrath said:
Thanks for that. Hmm I definitely have something going on then. This is my file name after it downloads
1XAfpo2cZvdZrPICeYg_UIvA0oeE0V1ux.bin but it has a meta folder so it's a zip for sure but I bet it's getting corrupted on the download.
Click to expand...
Click to collapse
Have you tried a different browser? I had an issue similar a bit ago(not related to this file), where the file was downloading as a bin. I tried a different browser and no cognito mode and it fixed it for me.
Cleaned
Well, I did it to myself. I was in a hurry and wiped everything and installed the Oreo zip, booted up without flashing magisk zip and stock recovery came back and I haven't had time to start from step 1.
Don't do what I did, FLASH MAGISK after the oreo :doh
I just re-read the OP and I don't know what I did that caused TWRP to go bye bye but stock recovery absolutely came back.
Thanks for doing all this for us. I literally have nothing right now to give, but I will be donating in the next week or so.
@Josh McGrath Weird. I wasnt able to test the zip since i boxed up the V30 that i was loaned to make this happen. I have double checked that i removed recovery-from-boot.p .. there must be another mechanism in place that restores stock recovery. I will update the first post so people know that flashing Magisk is NOT optional.
Sorry you have to go through the process all over again.
-- Brian
Believe I nuked LAF, download mode acts like it is booting up, freezes with the little logo then reboots to system, not able to use LG up at all due to not going in to download mode, tried using lg bridge to fix recovery(refreshing latest firmware thinking it would maybe help rejuvenate LAF)
Couldn't get fastboot to work at the beginning, but ended up being able to relock the bootloader
were the mess up was I believe, thinking h933 LAF was still installed and rerooting.
Anyway to flash LAF thru FWUL?
wills3gslide said:
Believe I nuked LAF, download mode acts like it is booting up, freezes with the little logo then reboots to system, not able to use LG up at all due to not going in to download mode, tried using lg bridge to fix recovery(refreshing latest firmware thinking it would maybe help rejuvenate LAF)
Couldn't get fastboot to work at the beginning, but ended up being able to relock the bootloader
were the mess up was I believe, thinking h933 LAF was still installed and rerooting.
Anyway to flash LAF thru FWUL?
Click to expand...
Click to collapse
I hate to be the bearer of bad news too. But I don't have a download mode anymore either.. can't even boot into it. Tried it with just plugging it in as well. Doesn't exist.
Also don't have TWRP because I didn't flash Magisck after.
ClockworkImpulse said:
I hate to be the bearer of bad news too. But I don't have a download mode anymore either.. can't even boot into it. Tried it with just plugging it in as well. Doesn't exist.
Also don't have TWRP because I didn't flash Magisck after.
Click to expand...
Click to collapse
If I remember correctly I flashed majisk after flashing 20k.zip, wish I would of waited to update but at least others will be aware.
Still great job @runningnak3d, might wanna pull the 20k.zip for now, seems there is another check for lafbak to overwrite LAF corrupting the partition
wills3gslide said:
Believe I nuked LAF, download mode acts like it is booting up, freezes with the little logo then reboots to system, not able to use LG up at all due to not going in to download mode, tried using lg bridge to fix recovery(refreshing latest firmware thinking it would maybe help rejuvenate LAF)
Couldn't get fastboot to work at the beginning, but ended up being able to relock the bootloader
were the mess up was I believe, thinking h933 LAF was still installed and rerooting.
Anyway to flash LAF thru FWUL?
Click to expand...
Click to collapse
So you have twrp installed still?
Sent from my [device_name] using XDA-Developers Legacy app
Josh McGrath said:
So you have twrp installed still?
Click to expand...
Click to collapse
It put stock recovery back on
Related
I have flashed twarp recovery through flashify. But i cant get into recovery mode. Im on H815-10b-SEA.
Please help
Same, I have it installed and Flashed it using Flashify but doing the button combo still goes to LG's recovery
What I did was when already in TWRP (using Flashify/fastboot command) simply install TWRP again, from there.
Choose install, image, recovery and select the TWRP image file. Flash. Now a button-reboot should work :good:
So TWRP now works for locked BL?
Sent from my LG-H815 using Tapatalk
Pfeffernuss said:
What I did was when already in TWRP (using Flashify/fastboot command) simply install TWRP again, from there.
Choose install, image, recovery and select the TWRP image file. Flash. Now a button-reboot should work :good:
Click to expand...
Click to collapse
Just tried it but still not working for button combo, Bit weird, I have an app that i use to get into recovery so not so bad, but still weird
Rehok said:
Just tried it but still not working for button combo, Bit weird, I have an app that i use to get into recovery so not so bad, but still weird
Click to expand...
Click to collapse
Would you please share this app?
pomponazzo said:
Would you please share this app?
Click to expand...
Click to collapse
There are multiple on the Play store, I use https://play.google.com/store/apps/details?id=com.naman14.powermenu&hl=en_GB as its material design so looks nice
imarcel99 said:
So TWRP now works for locked BL?
Sent from my LG-H815 using Tapatalk
Click to expand...
Click to collapse
I'd like to know the secrets to this as well...
Rehok said:
Same, I have it installed and Flashed it using Flashify but doing the button combo still goes to LG's recovery
Click to expand...
Click to collapse
Have you attempted to do anything in TWRP such as making/restoring a backup, or flashing something besides TWRP? This is very interesting to me!
Sent from my VS986
Can someone confirm if flashing TWRP is possible with a locked bootloader with root as hinted above by the means of Flashify etc?
Thanks
A few people seem to have had success and I suspect this question is going to get more important with Marshmallow being quite tricky to root without an unlocked bootloader.
interesting... i might give it a try. might backup with LG bridge first
It's not possible to flash TWRP on a locked bootloader because until it's unlocked, the recovery partition is write protected. So TWRP can't be written to the device.
I have flashed twrp on several devices with a locked boot loader. It depends on if the version of twrp has been patched where the boot loader detects it as official lg recovery. .that's what I've heard it was but I have several lg devices with twrp and locked bl
Sent from my LG-VS450PP using Tapatalk
Very much doubt this is possible on the g4. Unless anyone has proof, I don't think it's possible.
I tried.
Flash recovery and reboot.
Reboot to recovery through app gives secure boot error but it boots normally.
Rebooting with button combination takes me to stock recovery, so don't know if it flashed it or not.
Doesn't work even going into recover manually by saying yes when on stock recovery.
Just broke stock recovery but boots fine.
Oh I bet it ain't happening on this g4 lol I'm having that same fastboot/****ed up stock recovery with my gpad 10.1 and it still boots into Android... I just wish I had the same look as everyone else who had success flashing recovery with a locked bootloader on that tablet
Sent from my VS986 using Tapatalk
---------- Post added at 12:11 PM ---------- Previous post was at 12:11 PM ----------
But when it comes to my g4 I want everything to be solid and nothing half assed
Sent from my VS986 using Tapatalk
Thanks to everyone else for supplying the files. This is the stock 20G image, without a recovery.
Upgrades from 20E fine. Reflash SuperSu after install to regain root. Enjoy.
Download Here
alongenemylines said:
Thanks to everyone else for supplying the files. This is the stock 20G image, without a recovery.
Upgrades from 20E fine. Reflash SuperSu after install to regain root. Enjoy.
Download Here
Click to expand...
Click to collapse
How do you reflash without a recovery?
Sent from my LG-D851 using XDA Free mobile app
You still need a custom recovery, this zip just won't overwrite it.
If you flash with twrp, you'll still have twrp after the flash
That worked great. Thanks
Sent from my LG-D851 using XDA Free mobile app
alongenemylines said:
Thanks to everyone else for supplying the files. This is the stock 20G image, without a recovery.
Upgrades from 20E fine. Reflash SuperSu after install to regain root. Enjoy.
Download Here
Click to expand...
Click to collapse
Worked great, Lookout security says I'm not vulnerable. Here's a download link for SuperSu to flash after flashing 20G update https://www.androidfilehost.com/?fid=95857557620392009
Per the Zimperium app, the 20g update is still vulnerable...
sderaps said:
Unfortunately Stagefright CVE-2015-6602 is still vulnerable according to Zimperium Stagefright detector app.
Lookout Stagefright Detector will not detect the latest Version 2.0 vulnerabilities of Stagefright, and make it clear in there app description.
"This app does not support detection of Stagefright 2.0 vulnerabilities. "
Click to expand...
Click to collapse
Great
Lookin good on my Lg G3.
This is the checksum that I am getting. Anyone else can confirm this is correct?
4544093c57e9bf504b89e714523b4e9d
So does anyone have the latest 20g radio in a flashable zip? Also, this upload is VERY slow, could someone please please reup to a faster host?
alongenemylines said:
You still need a custom recovery, this zip just won't overwrite it.
If you flash with twrp, you'll still have twrp after the flash
Click to expand...
Click to collapse
Yeah... untrue for me, just deleted all my entire phone trying to get back into recovery. This update erased everything. :crying:
demoncamber said:
Yeah... untrue for me, just deleted all my entire phone trying to get back into recovery. This update erased everything. :crying:
Click to expand...
Click to collapse
Not sure what you did differently. This is just the stock update from zip from this thread (http://forum.xda-developers.com/tmobile-lg-g3/development/d85120g-stock-update-zip-d85120e-t3218287), with recovery.img removed, and the updater script modified to NOT flash the recovery.
Only way I can think of that you could have deleted everything on your phone is if you did a wipe first.
alongenemylines said:
Not sure what you did differently. This is just the stock update from zip from this thread (http://forum.xda-developers.com/tmobile-lg-g3/development/d85120g-stock-update-zip-d85120e-t3218287), with recovery.img removed, and the updater script modified to NOT flash the recovery.
Only way I can think of that you could have deleted everything on your phone is if you did a wipe first.
Click to expand...
Click to collapse
No idea here as well, did not wipe before. I flash things all the time, just the normal load zip, flash, reboot was done. Then it loaded up, saw root was lost, went to boot back into recovery, erased everything.
demoncamber said:
So does anyone have the latest 20g radio in a flashable zip? Also, this upload is VERY slow, could someone please please reup to a faster host?
Click to expand...
Click to collapse
I uploaded a modem zip for 20G
Sent from my LG-D851 using Tapatalk
---------- Post added at 04:33 AM ---------- Previous post was at 04:31 AM ----------
Link to my Google drive for all. D851 Modems
https://drive.google.com/folderview?id=0BxVKW5ov-PmLbF9LR2pvcEljemc#
Sent from my LG-D851 using Tapatalk
I'm still on 10m. Can I flash this without any problems? And what are the improvements?
Dream Reality Syndrome said:
I'm still on 10m. Can I flash this without any problems? And what are the improvements?
Click to expand...
Click to collapse
the improvements is just the stagefright bug patch
oh no i think im up a creek
so i flashed the rom and SU then as im rebooting to DL mode to reflash my recovery.img the effing cat jumps into my hands and knocks the phone out of my hands and out popped the battery. now when i hold vol up and plug usb in i get the quick blue DL mode screen as usual but no firmware screen to follow, insted a black screen with 6 tiny white lines of text in the top left corner that read as follows
[600] fastboot mode started
[690] --- reset ---
[700] --- portcharge ---
[860] --- reset ---
[860] --- portcharge ---
[1070] fastboot: processing commands
the rom still boots if i battery out and restart also have done multiple factory resets
any ideas in fixing this would be greatly appreciated
Looks like its booting to fastboot mode. You can flash proper recovery using a PC and the adb\fastboot package. Been too long for me to remember details but google will get you the answer.
Sent from my SHIELD Tablet using Tapatalk
Works like a charm for me... It does what is said...
Enviado desde mi LG-D851 mediante Tapatalk
Hi All
I've searched as much as i can but can't find a solution to my problem. I flashed SuperSU over the official Lineage 14.1 install and now it won't boot, just flashes red and blue with a secure boot error. I've tried extracting boot.img from the ROM and flashing that but no luck.
Does anyone know/have the files I need to flash to cure this?
Thanks in advance
P.S. Just notice the menu bar in TWRP is red. Don;t know if that means anything
P.S. P.S If anyone knows the correct file I need to flash over a Lineage install for root that would also helpful
Download mode go back to stock I had that problem I almost had a panic attack use 10b tot and special DLL to downgrade u be ready to go.
Sent from my LG-VS985 using Tapatalk
Thanks mate. Seems to have worked after I finally found a compatible USB port!
crispy77 said:
Thanks mate. Seems to have worked after I finally found a compatible USB port!
Click to expand...
Click to collapse
There was no need to reflash the firmware...
The only thing that you needed to do was install Mr.Bump.
And when you mean the menu bar do you mean status bar?(The place where the battery percent is.)
Sotiris02 said:
There was no need to reflash the firmware...
The only thing that you needed to do was install Mr.Bump.
And when you mean the menu bar do you mean status bar?(The place where the battery percent is.)
Click to expand...
Click to collapse
Isn't true he can't get into recovery
Sent from my LG-VS985 using Tapatalk
djevil said:
Isn't true he can't get into recovery
Click to expand...
Click to collapse
First of all,He didn't mention anything about not being able to get into TWRP.
Secondly,When you get Secure Booting Error,you can't boot into your ROM.(But you can access TWRP)
So the fastest fix is flashing Mr.bump via TWRP and then you'll be able to Boot into your ROM.
On the other hand,If after secure booting someone can't access TWRP.(Normally you can access TWRP after secure booting,but if you are unlucky)Then reflashing Stock ROM is the best choice (and the only one)
Greetings.
Sotiris02 said:
First of all,He didn't mention anything about not being able to get into TWRP.
Secondly,When you get Secure Booting Error,you can't boot into your ROM.(But you can access TWRP)
So the fastest fix is flashing Mr.bump via TWRP and then you'll be able to Boot into your ROM.
On the other hand,If after secure booting someone can't access TWRP.(Normally you can access TWRP after secure booting,but if you are unlucky)Then reflashing Stock ROM is the best choice (and the only one)
Greetings.
Click to expand...
Click to collapse
I be down that ride he brick the phone basically he got to start all over again.
Sent from my LG-VS985 using Tapatalk
---------- Post added at 08:45 PM ---------- Previous post was at 08:45 PM ----------
crispy77 said:
Hi All
I've searched as much as i can but can't find a solution to my problem. I flashed SuperSU over the official Lineage 14.1 install and now it won't boot, just flashes red and blue with a secure boot error. I've tried extracting boot.img from the ROM and flashing that but no luck.
Does anyone know/have the files I need to flash to cure this?
Thanks in advance
P.S. Just notice the menu bar in TWRP is red. Don;t know if that means anything
P.S. P.S If anyone knows the correct file I need to flash over a Lineage install for root that would also helpful
Click to expand...
Click to collapse
Bro u alright did everything work
Sent from my LG-VS985 using Tapatalk
All good now. Thanks both for the help and info.
djevil said:
I be down that ride he brick the phone basically he got to start all over again.
Click to expand...
Click to collapse
Well i had Secure Booting Error while trying Dual Booting.
Just flashed MR.Bump and everything worked.
When you get Secure Booting it doesn't mean that you have Soft/hardBRICKED your LG G3.
Your device only gets to bootloop.Nothing else.
If you had secure boot error and couldn't access TWRP then you should have been at the unlucky road.
That's why..We ask if he can access TWRP or not.
If he can,flash Mr. Bump.
If he can't,reflash stock ROM.
So I messed up my Pixel 3 XL. When trying to root, I flashed TWRP on the device and it gave all kinds of problems. I could not boot at all.
I then flashed what I thought to be stock boot.img. Now it boots (only while unlocked) and takes me to the welcome screen. It boots with no issues but now the touchscreen doesn't work.
I've tried to revert back to stock many, many times using the guide here & factory image. All is successful except the boot.img - says FAILED.
I suspect that I need to flash boot.img again but no clue how....
Any help is greatly appreciated!
Flash the factory image, wipe and start over.
or
Flash the factory image with wipe removed, backup what ever you forgot.
Then
Flash factory image with wipe and start over.
parakleet said:
Flash the factory image, wipe and start over.
or
Flash the factory image with wipe removed, backup what ever you forgot.
Then
Flash factory image with wipe and start over.
Click to expand...
Click to collapse
Trying now. Like I said though, I have tried to flash the factory image, wiping and not wiping. I am not concerned about backup data, just want it to work.....
Thanks for the input!
Even though this is the 20th time I've done that, still the touch screen does not work when bootloader is unlocked but boots to welcome screen. Once bootloader is locked, it says no operating system found and will not boot. Anyone else with a suggestion?
rpolito73 said:
Even though this is the 20th time I've done that, still the touch screen does not work when bootloader is unlocked but boots to welcome screen. Once bootloader is locked, it says no operating system found and will not boot. Anyone else with a suggestion?
Click to expand...
Click to collapse
Try flashing the binaries from google.
biggiesmalls657 said:
Try flashing the binaries from google.
Click to expand...
Click to collapse
Going to google how to. Any guides on how to? Thanks for the input!
I think this is what I need. I bet the touch sensors are in the Qualcomm pack. Just dont know how to flash....
rpolito73 said:
Going to google how to. Any guides on how to? Thanks for the input!
I think this is what I need. I bet the touch sensors are in the Qualcomm pack. Just dont know how to flash....
Click to expand...
Click to collapse
You can't flash a binary. They're there to build custom roms. I always ask because so many people miss this, but do you have the latest sdk platform tools, r28?
Sent from my [device_name] using XDA-Developers Legacy app
This same thing happened to me. Make sure you're using the latest versions of ADB and Fastboot and try flashing the factory image again. I think that is what fixed mine.
rpolito73 said:
So I messed up my Pixel 3 XL. When trying to root, I flashed TWRP on the device and it gave all kinds of problems. I could not boot at all.
I then flashed what I thought to be stock boot.img. Now it boots (only while unlocked) and takes me to the welcome screen. It boots with no issues but now the touchscreen doesn't work.
I've tried to revert back to stock many, many times using the guide here & factory image. All is successful except the boot.img - says FAILED.
I suspect that I need to flash boot.img again but no clue how....
Any help is greatly appreciated!
Click to expand...
Click to collapse
Have you tried using this??
https://forum.xda-developers.com/pi...ool-crosshatchdb-one-pixel-3-xl-tool-t3864644
rpolito73 said:
Trying now. Like I said though, I have tried to flash the factory image, wiping and not wiping. I am not concerned about backup data, just want it to work.....
Thanks for the input!
Click to expand...
Click to collapse
... slow down and read more. double check the basics... and for God's sake stop re-locking the bootloader! Leave it unlocked or you may very easily brick your device. ONLY re-lock the bootloader when you know exactly what you are doing and have a good reason to do so. With your bootloader unlocked, plenty of folks here can help you and there will always be a way out. :good:
jd1639 said:
You can't flash a binary. They're there to build custom roms. I always ask because so many people miss this, but do you have the latest sdk platform tools, r28?
Sent from my [device_name] using XDA-Developers Legacy app
Click to expand...
Click to collapse
Yes sir - doubled checked!
lucky_strike33 said:
Have you tried using this??
https://forum.xda-developers.com/pi...ool-crosshatchdb-one-pixel-3-xl-tool-t3864644
Click to expand...
Click to collapse
Will try now. Thanks!
lucky_strike33 said:
Have you tried using this??
https://forum.xda-developers.com/pi...ool-crosshatchdb-one-pixel-3-xl-tool-t3864644
Click to expand...
Click to collapse
Can't get this to work. I'm still stuck in same position as stated in OP.
rpolito73 said:
Can't get this to work. I'm still stuck in same position as stated in OP.
Click to expand...
Click to collapse
You may need to re setup fastboot and adb again. I would delete all files that you have and then setup with a new install.
Use the tool to have it setup adb for you so that it is up to date.
---------- Post added at 09:03 AM ---------- Previous post was at 08:54 AM ----------
lucky_strike33 said:
You may need to re setup fastboot and adb again. I would delete all files that you have and then setup with a new install.
Use the tool to have it setup adb for you so that it is up to date.
Click to expand...
Click to collapse
Once you get adb set up again go to google firmware: https://developers.google.com/android/images
download and extract the file and then open the file. Extract image file. Open the image file and drag boot.img to your fastboot folder.
Run both commands in fastboot:
fastboot flash boot_a boot.img
fastboot flash boot_b boot.img
Then this should start up your phone as it will wipe out twrp. Hope this works for you.
lucky_strike33 said:
You may need to re setup fastboot and adb again. I would delete all files that you have and then setup with a new install.
Use the tool to have it setup adb for you so that it is up to date.
---------- Post added at 09:03 AM ---------- Previous post was at 08:54 AM ----------
Once you get adb set up again go to google firmware: https://developers.google.com/android/images
download and extract the file and then open the file. Extract image file. Open the image file and drag boot.img to your fastboot folder.
Run both commands in fastboot:
fastboot flash boot_a boot.img
fastboot flash boot_b boot.img
Then this should start up your phone as it will wipe out twrp. Hope this works for you.
Click to expand...
Click to collapse
Flashed both with no problem. Phone boots to welcome screen, touchscreen still unresponsive. :crying:
rpolito73 said:
Flashed both with no problem. Phone boots to welcome screen, touchscreen still unresponsive. :crying:
Click to expand...
Click to collapse
Its a hardware problem and now you will need to contact google to get it exchanged
---------- Post added at 09:41 AM ---------- Previous post was at 09:36 AM ----------
rpolito73 said:
Flashed both with no problem. Phone boots to welcome screen, touchscreen still unresponsive. :crying:
Click to expand...
Click to collapse
When you are at the welcome screen, does your cell service pop up or anything that acts weird?
Do you know which slot you are booted in? A or B? Maybe try booting into a different slot??
lucky_strike33 said:
Its a hardware problem and now you will need to contact google to get it exchanged
---------- Post added at 09:41 AM ---------- Previous post was at 09:36 AM ----------
When you are at the welcome screen, does your cell service pop up or anything that acts weird?
Do you know which slot you are booted in? A or B? Maybe try booting into a different slot??
Click to expand...
Click to collapse
Nothing acts weird. I have Pixel 3 too and boots up the same. It doesn't show my cell service, just battery on top right.
I don't know which slot it is booting from. I just contacted Google and they are having a specialist contact me.... Oh boy.
rpolito73 said:
Nothing acts weird. I have Pixel 3 too and boots up the same. It doesn't show my cell service, just battery on top right.
I don't know which slot it is booting from. I just contacted Google and they are having a specialist contact me.... Oh boy.
Click to expand...
Click to collapse
https://thedroidguy.com/2018/11/how...3-xl-touchscreen-not-responding-issue-1094388
Try that and do you have a sim card in the phone?
lucky_strike33 said:
https://thedroidguy.com/2018/11/how...3-xl-touchscreen-not-responding-issue-1094388
Try that and do you have a sim card in the phone?
Click to expand...
Click to collapse
On it and no I have no sim in it currently. The only step I haven't done in that article is the boot to safe mode. Those instructions def dont take me to Pixel 3xl safe mode. I tried to boot in safe in recovery but there isn't an option. I don't believe it can be a 3rd party as I have wiped it in recovery multiple times.
rpolito73 said:
On it and no I have no sim in it currently. The only step I haven't done in that article is the boot to safe mode. Those instructions def dont take me to Pixel 3xl safe mode. I tried to boot in safe in recovery but there isn't an option. I don't believe it can be a 3rd party as I have wiped it in recovery multiple times.
Click to expand...
Click to collapse
Have you talked with google? what happened?
LG V30 T-Mobile H932 20r ROM
For U.S. T-mobile H932 ONLY. Do NOT install this on any other V30/V30+/V30S except U.S. T-mobile H932. You will brick your phone.
DISCLAIMER : I do not hold responsiblity for any of the following but not limited to : Bricks due to not reading, nuclear war, cat dying. I will not be held responsible for any damage of any kind due to the result of this zip. It is held under your own risk. This does not mean that i wont help in any way shape or form to recover from anything that may happen at the result of flashing this zip. PLEASE FLASH RESPONSIBLY! PS. This zip has NOT been tested by me!
This Rom is 100% Stock. Most recent TWRP should first be installed. Then you can install this Rom and have Oreo with working TWRP.
This zip is created from the original KDZ. It contains almost the complete 20r firmware, but the partition table rewriting part and recovery image is removed. I changed the system.img, so you do not have to reinstall TWRP (recovery-from-boot.p deleted) when ROM once booted. I also changed the partition size of system.img, so the vendorized people can install this too without having problems because of a too small system partition. This is a continuation of westwood24's idea and work, I've updated it to the newest fw version and edited / advanced it a bit. I followed his idea and made this for users who can not take OTA's because they have Custom Recovery / Root installed.
Features
Stock build made from official KDZ
Stock Build.prop
Unrooted
system.img modified to keep TWRP
System image size shrunk for being able to flash this on a smaller system partition, mainly caused by vendorizing
Removed dm-verity
Removed rctd (LG's root checker tool daemon)
Enabled opt-encrypt, it's your choice now if you want to encrypt your phone, it's no more forced. TWRP now is capable of decryption (both AOSP and stock) since a few versions
Added DTS build prop
Added all lockscreen weather animations build prop
Installation
What you need
Unlocked Bootloader [How to do]
Working TWRP installed (should be installed already, otherwise you wouldn't need this zip )[Link to newest unofficial TWRP]
When you need Root, Latest Magisk [Download]
H93220r.zip [Download]
How to install
When you are still on Nougat,
you should start fresh: Reboot to recovery using button combo or reboot app (needs root; btw, Magisk offers this possibility too: Menu -> Modules -> three dot menu top right - Reboot to recovery)
Then flash this TWRP.img via image flashing function in TWRP, reboot to recovery again (for fully working new recovery) and do a backup, then copy this backup to your PC.
Then initiate a factory reset. Wipe your system partition too in TWRP advanced wiping menu, copy the 20r firmware zip to your SD and install it. Reboot and enjoy
From Oreo:
For clean install: Factory reset and wipe system
You can also keep your data by simply dirty flashing the zip. *Be aware that problems may occure, maybe you need to do a factory reset to start fresh*
Flash the 20r zip, then Magisk zip when you need root, then reboot to System = you're DONE
P.S.: could be, that you first need to boot up your fresh install and set it up before you can flash magisk.
At the first time you boot to system, it can be TWRP says No OS installed. You can ignore it.
If TWRP asks if you want to install SU, hit no (in newest TWRP SU is disabled, and the option to install the TWRP app is disabled too.)
Rom Version
Android Version: 8.0 Oreo
Android security patch level: 2019-1-1
Don´t forget to hit the thanks-button if you like this zip! :good:
You want to help me with a [donation?] Not asking for it, I have fun doing this for you, but feel free...
#RESERVED
Please to anyone who had issues with the zip.....
We have a fix!
Flash this zip
https://www.androidfilehost.com/?fid=1395089523397908552
Then flash a rom from your SD CARD
ONLY FLASH THIS OF YOU HAD A BRICK FROM 20R!!
Zip is live! Enjoy!
your zip name is wrong.. should be h93220r* ( it doesnt matter but i was confused at first)
also, i flashed it and nothing happened. my system is still the same as i was before (20p)
and in the script, i think it says 'model=VS996' or something. since it just words, it may not matter.
but maybe you used the wrong script for h932
In any case, the zip did nothing for me. flashing only took about 10 secs in total, and flashing system barely took a second.
So seems theres an issue with the zip. Maybe upload didn't quite finish as I did it while at work via rdp to my pc at home. Will look into it when I get off work
JohnFawkes said:
So seems theres an issue with the zip. Maybe upload didn't quite finish as I did it while at work via rdp to my pc at home. Will look into it when I get off work
Click to expand...
Click to collapse
Did you remove the file?
Sent from my LG-H932 using XDA Labs
BROKEN1981 said:
Did you remove the file?
Sent from my LG-H932 using XDA Labs
Click to expand...
Click to collapse
For now yes. Everyone was having issues. I'm on my way home from work right now so it'll be back online in probably an hour
JohnFawkes said:
For now yes. Everyone was having issues. I'm on my way home from work right now so it'll be back online in probably an hour
Click to expand...
Click to collapse
Ahh ok, thought I was missing something.
Sent from my LG-H932 using XDA Labs
JohnFawkes said:
For now yes. Everyone was having issues. I'm on my way home from work right now so it'll be back online in probably an hour
Click to expand...
Click to collapse
looking forward to the fix.
I figured people might want these files.
Root-System-Media
Uploading new zip now! figured out all issues
JohnFawkes said:
Uploading new zip now! figured out all issues
Click to expand...
Click to collapse
Awesome thank you!
Sent from my LG-H932 using XDA Labs
BROKEN1981 said:
Awesome thank you!
Sent from my LG-H932 using XDA Labs
Click to expand...
Click to collapse
no problem. should be live in about 15 minutes
zip is live!
Awesome. Woke up this morning to the system update notification. Glad there are still T-Mobile users around here that works to get this stuff out. Downloading now. Will report back after I flash it.
---------- Post added at 07:43 AM ---------- Previous post was at 07:19 AM ----------
BROKEN1981 said:
I figured people might want these files.
Root-System-Media
Click to expand...
Click to collapse
Are these new in this update?
JohnFawkes said:
zip is live!
Click to expand...
Click to collapse
At the end of the flash it looks like it flashed fine but then it tells me it failed to mount everything. When I go to reboot into the system it tells me there is no OS. I was just going to flash the 20p zip I had but then it restarted and now I can't get into TWRP again. Now it just restarts into fastboot mode
UPDATE: I was able to get back into TWRP by going through the factory reset option (Volume down + Power, etc.) I'm now flashing the 20p zip I have.
UPDATE 2: Didn't work. Got into a bootloop. Restoring an old Lineage backup I have. Should have made a backup of my current state before flashing but I wasn't thinking
UPDATE 3: That didn't work either. Everything I flash it tells me failed to mount '/persist-lg' and just boot loops. I guess the next thing to do is try and use LGUP to restore
Same here as above. Doesnt mount system persist cache.
sunmybun said:
Same here as above. Doesnt mount system persist cache.
Click to expand...
Click to collapse
Flashing anything else doesn't fix it either. My phone is chillin' in recovery mode until I can figure it out
im working on fix guys. zip is removed for now. no clue why this is happening. but a fix is being worked on
JohnFawkes said:
im working on fix guys. zip is removed for now. no clue why this is happening. but a fix is being worked on
Click to expand...
Click to collapse
Thanks. Searching around, I see there have been people having issues like this before with other devices. Something to do with the persist.img. Did the last zip include one? Also, I hope whatever it is can be fixed with a new zip. I don't know why restoring a backup or flashing an old full stock zip wouldn't fix anything.
This is basically what I'm getting
http://en.miui.com/thread-467490-1-1.html