Develop Bugs

[Rom][7.0]Lenovo ZUK Z2 PLUS (2132) INDIAN firmware V2.5.104ST using MI Flash tool

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I am not responsible for anything that may happen to your phone as a result of installing custom roms and/or kernels. you do so at your own risk and take the responsibility upon yourself.
Part -A Configure Computer
1) Download and extract the Stock firmware, Setup tools & Drivers
2) Install ADB Drivers
3) Install Lenovo ZUK Z2 PLUS (2132) Drivers
4) Setup Tool all in one
5) Setup Mi Flash tool
Part -B Booting device in to EDL Mode
Note : Thank to @mauronofrio for his tool
1) Enable Android debugging (ADB) in developer options
2) Connect your device to PC
3) open Tool all in one
4) The tool detects your device and pop up a window on your z2 plus device
5) chick and click OK
6) Know go to Tool all in one > Advance Options
7) click Reboot EDL
8) Device will boot in to EDL Mode
Part -C Flashing stock Firmware
1) Open Mi Flash tool
2) Click on refresh to detect your Z2 plus as COM X ( Note : X represents device port numbers )
3) If you want to lock bootloader then select " clear all and lock " which was present on right bottom corner
4)Click on flash
Note : Never disconnect your device while MI tool was flashing
5) It take 300 sec to complete task after that hold power key for 15 sec to boot your device​
Lenovo ZUK Z2 Plus ( 2132) Nougat
Indian firmware ( Note : all partitions fixed by me :good: )
Mi Flash tool ( Note : Recommended and Modified version by Me for deep partitions:fingers-crossed: )
Tool All In One ( Note : for Booting in to EDL, flashing TWRP , Unlock & lock bootloader )
adb-setup ( Note : Very important )
Other useful links ( If you want )
Drivers
PdaNet
Qualcomm_QHSUSB
ZUK_Z2132_drivers_V1.0.5
Tools
QPST
@ZUK ................................... for device
@zukfans.eu ..................... for source
@Francko76 .................... for source
@xiaomi .............................. for MI Flash tool
@mauronofrio ................. for Tool All In One
@Annabathina .................. for fixing deep partitions
@XDA ................... developers for helping me
@lenovo forum ........... developers
Lenovo ZUK Z2 Plus ................. Model 2132​
XDA:DevDB Information
[Rom][7.0]Lenovo ZUK Z2 PLUS (2132) INDIAN firmware V2.5.104ST using MI Flash tool, ROM for the Lenovo ZUK Z2 (Plus)
Contributors
Annabathina
ROM OS Version: 7.x Nougat
Based On: Stock rom
Version Information
Status: Stable
Current Stable Version: 2.5.104ST
Stable Release Date: 2017-04-18
Created 2017-09-25
Last Updated 2017-09-25

Reserved

Reserved

RESERVED

Good to see you buddy.....loved your work in yu forums. Hope you will do same with thus device too.....looking forward
Sent from my Z2 Plus using Tapatalk

Anna in zuk z2 forum :silly::laugh:
Now this phone will rock

Dextron01 said:
Good to see you buddy.....loved your work in yu forums. Hope you will do same with thus device too.....looking forward
Click to expand...
Click to collapse
stop quoting op please...

Dextron01 said:
Good to see you buddy.....loved your work in yu forums. Hope you will do same with thus device too.....looking forward
Sent from my Z2 Plus using Tapatalk
Click to expand...
Click to collapse
Dont quote everything. Fvck!
El Psy Congroo

https://t.me/joinchat/ExDwekLF21qSDmOwudq3gg I suggest you to join here @Annabathina

Interesting! Will try it out.
Thanks a lot for sharing!
Update. Be careful when flashing! Selecting save user data still wipes the phone and locks the bootloader. I made a backup like a week ago so didn't lose important data.

Can I use QFIL to flash this?
El Psy Congroo

Magz Heaven said:
Can I use QFIL to flash this?
El Psy Congroo
Click to expand...
Click to collapse
of course you can but I did not tried on QFIL
it works excellent on Mi Flash tool including deep partitions , bootloader locking etc

daviduco said:
Is this stock indian? What modifications does it has?
Click to expand...
Click to collapse
Its just the Indian version without any chinese apps or bloatwares... Indian version lacks some features which are present in the Chinese version and has some bugs too

I have flash today the 7.0(as you given for downloading) firmware using mi flash tool the process was successful but after that I have tried to install AEX 4.6 but Volte was not working then I flashed the official 6.0 firmware using QFIL Volte we as enabled then I again tried to flash AEX but Volte was not working even I have turned on Volte in stock rom before flashing custom ROM
Any help?

kany1 said:
I have flash today the 7.0(as you given for downloading) firmware using mi flash tool the process was successful but after that I have tried to install AEX 4.6 but Volte was not working then I flashed the official 6.0 firmware using QFIL Volte we as enabled then I again tried to flash AEX but Volte was not working even I have turned on Volte in stock rom before flashing custom ROM
Any help?
Click to expand...
Click to collapse
wowo did you really flash a 7.x ROM on top of 6.x stock?

fallen.kn said:
wowo did you really flash a 7.x ROM on top of 6.x stock?
Click to expand...
Click to collapse
Before flashing with mi flash tool I was using AEX 4.6 and then i tried this flashing and when i was having problem with Volte then I flashed the original firmware (marshmallow) using QFIL)Volte was working then I flash AEX 4.6 but then also Volte was not working. I don't know why that strange behavior was there with Volte because I have flashed tons of rom before and I know all the procedure that how to flash a custom rom. So i think there was some problem with the package which is provided for flagging with mi tool because the flashing was done using EDL method. But my Volte is again working fine because someone provide the solution on AEX 4.6 discussion.

When I click on Reboot EDL , my device just reboots to system. How does the EDL mode looks like? Is it like fastboot mode? Why is my device booting into system again. I followed all the steps provided, am i missing somthing

Phone isn't booting into edl mode... Instead of that phone is rebooting.

I had the same problem
kany1 said:
Before flashing with mi flash tool I was using AEX 4.6 and then i tried this flashing and when i was having problem with Volte then I flashed the original firmware (marshmallow) using QFIL)Volte was working then I flash AEX 4.6 but then also Volte was not working. I don't know why that strange behavior was there with Volte because I have flashed tons of rom before and I know all the procedure that how to flash a custom rom. So i think there was some problem with the package which is provided for flagging with mi tool because the flashing was done using EDL method. But my Volte is again working fine because someone provide the solution on AEX 4.6 discussion.
Click to expand...
Click to collapse
What was the solution? I had the same problem.

I think developers are sleeping... Nobody is giving solution.

[ROOT] J730x 8.x and 9.x and Upgrade Bootloader and Modem

[ROOT] J730x 8.x and 9.x and Upgrade Bootloader and Modem
Upgrade bootloader and Modem and Root
Root all variants Galaxy J730x 8.x and 9.x
Mega Thread for all users
ROOT TWRP BT and CP
this post is for all users who want to upgrade their rom android
nougat to Oreo or Oreo to Pie and avoid the samsung locks.
My recommendation is to avoid official roms because of
manufacturer blockades, this is a great people activity.
To avoid the protections of samsung you can simply update
your bootloader and your modem then install TWRP and
update your ROM to Oreo or to Pie.
If you already have TWRP and Root just flash the new bootloader
Pie and CP Modem and you you can use custom roms
Remember i recomend only custom roms Android 10 Q in this moment
[ROOT Normaly]
1. Download Stock ROM 9.x or upgrade normaly
2. Start your ROM enter configuration, developer options and set Unlock by OEM
3. Download Odin 3.14 and drivers
4. Download Magisk and TWRP 3.3.0 and no-verity-opt-encrypt-6.1.zip
5. Install drivers for J7
6. Copy Magisk and no-verity-opt-encrypt-6.1.zip to SD Card
7. Enter in Stock Recovery and Factory reset
[Download MODE]
8. After this enter in download mode imediatly or your system encrypt
9. no start your stock rom or your system encrypt
10. Open Odin 3.14 flash Stock Bootloader and Modem Only If necessary
11. Flash TWRP with Odin or upgrade via img
12. Reboot imediatly in Recovery
13. Flash Magisk 20
14. Flash no-verity-opt-encrypt-6.1.zip
15. iNTALL your prefered Custom ROM
16. Install Magisk Manager 7.5
17. Press Thanks please
18. in this moment install Havoc or Lineage 17.1
[Bootloader Upgrade]
1. Download Samsung drivers
2. Download Odin
3. Download your firmware ROM Official
4. Power Off your mobile J7
5. Restart Phone in Download Mode (press and hold Home + Power + Volume Down buttons)
6. Install Samsung Drivers
7. Connect Your phone with USB cable to PC
8. Open Odin and select BT to upgrade bootloader
9. Select too CP partition to upgrade your Modem / Wifi
10. After this upgrade install any Custom ROM if you have TWRP and ROOT
11. This upgrade keep your TWRP only install new ROM and Magisk
12. i always use no-verity-opt-encrypt-6.1.zip flash with twrp if your system is STOCK
13. If you see RMM state use Miracle 2.58 to unlock your systemhacker
[TWRP 3.3.0 ananjaser1211]
https://github.com/ananjaser1211/android_device_samsung_jxy17lte/releases
[Magisk 20.4] Primary option
https://github.com/topjohnwu/Magisk/releases/download/v20.4/Magisk-v20.4.zip
[Manager 7.5.2]
https://www.apkmirror.com/apk/topjohnwu/magisk-manager/magisk-manager-7-5-2-1e2de1bb-release/
[no-verity-opt-encrypt-6.1.zip]
https://build.nethunter.com/android-tools/no-verity-opt-encrypt/
[Official]
Magisk Official Post
https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
[RMM State Fix] Miracle box
https://forum.xda-developers.com/ga...-rmm-fix-oreo-8-1-oem-unlock-fix-dez-t3877764
Havoc OS 3.2 Stable for J730x
https://forum.xda-developers.com/ga...om-crdroid-6-3-android-q-10-0-galaxy-t4048917
Root J730x J730G J730F J730FM J730GM J730K
The Secret Of My Seccess is Jesus ♡​

Reserved to screens
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Root Magisk

Hi all.
I have a verry serius problem. I installed twrp recovery, but adb don't work. I'm totaly blind user, and using twrp recovery exclusivly by adb commands. Please any recovery with adb enabled automaticly when recovery is starting. Happy new year. Thanks and best regards

iksi said:
Hi all.
I have a verry serius problem. I installed twrp recovery, but adb don't work. I'm totaly blind user, and using twrp recovery exclusivly by adb commands. Please any recovery with adb enabled automaticly when recovery is starting. Happy new year. Thanks and best regards
Click to expand...
Click to collapse
three important considerations - 1. do a factory reset After installing the official ROM. 2. Instantly install and insert twrp recovery. 3. Install the magisk 18.
factory reset needed to delete encryption since Android 7 You will still need the magisk for Rute correct from the new actions Android 8.1 x I do not recommend the supersu After Oreo 8.1

I know that, but i can't doo nothing with out sited assistance. The problem are that adb disabled in recovery, and i can't doo factorry reset, and flash magisk. thanks again.

iksi said:
I know that, but i can't doo nothing with out sited assistance. The problem are that adb disabled in recovery, and i can't doo factorry reset, and flash magisk. thanks again.
Click to expand...
Click to collapse
Your problem is RMM State check This
https://forum.xda-developers.com/ga...-rmm-fix-oreo-8-1-oem-unlock-fix-dez-t3877764
Press thanks

hacker812c said:
Reserved to images
Click to expand...
Click to collapse
Magisk Manager 6.1.0
https://github.com/topjohnwu/Magisk/releases/download/manager-v6.1.0/MagiskManager-v6.1.0.apk
Magisk Stable 18.0
https://github.com/topjohnwu/Magisk/releases/download/v18.0/Magisk-v18.0.zip
Important Changelogs
v18.
- [General] Remove native systemless hosts (Magisk Manager is updated with a built-in systemless hosts module)
v17.0/17.1
- [Script] Add hexpatch to remove Samsung defex in new Oreo kernels

hacker812c said:
Your problem is RMM State check This
https://forum.xda-developers.com/ga...-rmm-fix-oreo-8-1-oem-unlock-fix-dez-t3877764
Press thanks
Click to expand...
Click to collapse
After Magisk 17.x the script fix Security Patch 01 Sep 2018 [Test Ok]

hacker812c said:
After Magisk 17.x the script fix Security Patch 01 Sep 2018 [Test Ok]
Click to expand...
Click to collapse
Download Magisk 18.1
https://github.com/topjohnwu/Magisk/releases/download/v18.1/Magisk-v18.1.zip
Magisk Manager 7.0.0
https://github.com/topjohnwu/Magisk/releases/download/manager-v7.0.0/MagiskManager-v7.0.0.apk
v18.1
- [General] Support EMUI 9.0
- [General] Support Kirin 960 devices
- [General] Support down to Android 4.2
- [General] Major code base modernization under-the-hood

I add information to upgrade your bootloader and modem to install Oreo and Pie roms and bypass samsung RMM state
This method is secure and your system is upgrade to Oreo

Updating
How to install :
iNSTALL twrp and Root
https://forum.xda-developers.com/ga...730f-fm-g-gm-x-samsung-galaxy-j7-pro-t3835629

TWRP 3.3.0.0 link download
https://forum.xda-developers.com/ga...730f-fm-g-gm-x-samsung-galaxy-j7-pro-t3835629
Upgrade your system to Android 10 Q
iF YOU have Android 8 upgrade to 9 first
iF YOU decide upgrade only BL and CP bootloader and modem
iF YOU upgrade BL and CP install Android 10 Q
iNSTALL Havoc OS or Lineage OS 17.1

Remember my friends do not install Official stock roms from others country in your phone this action block rmm install stock or bootloader of your country

Paranoid Android Pie Beta - Xiaomi Mi A2 Lite

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
We’re really excited to announce the release of Paranoid Android Pie betas.
On first launch, you’ll notice a clean setup with a beautiful wallpaper from Hampus Olsson, who teamed up with us again to create several beautiful pieces of artwork. For those who are unfamiliar, Hampus is a multi-disciplinary artist whose design stands itself and we’re glad to have him onboard. We also added further UI touches that we believe enhances the overall user experience.
The beta builds include adjustments and improvements on top of the stock Android CAF base. The Paranoid Android team and contributors are focusing on squashing existing bugs, and implementing and improving features.
Device-specific issues
- DT2W
- Camera crashes if it detects a face
Note: Custom kernels are NOT supported!
Download
Get the latest Xiaomi Mi A2 Lite build here!
Changelogs
Paranoid Android Pie beta released
Requirements
* Required * firmware version must be based on P-based builds.
Formatting/Wiping data (all user data is wiped, including internal storage (in case of a format)) is a must if you were using a different rom previously.
Instructions
Boot recovery from fastboot (TWRP recovery for Mi A2 Lite)
Format/Wipe /system and /data
Install AOSPA zip package
Install [optional] TWRP flashable
Don't forget to change slots after installing the rom in TWRP!
You have to reboot TWRP to the "new" slot to install GApps!
Important / Useful links
TWRP (bootable): https://androidfilehost.com/?fid=1395089523397933315
TWRP (flashable): https://androidfilehost.com/?fid=1395089523397933316
Forced encryption disabler: https://androidfilehost.com/?fid=1395089523397907941
Kernel source: https://github.com/33bca/android_kernel_xiaomi_msm8953
Help us improve PA by submitting good bug reports possibly with a log attached. Learn how to take logs here.
Our device maintainer for Xiaomi Mi A2 Lite is @33bca. Mention (@) me if you need some assistance and/or when reporting bugs.
Cheers and #StayParanoid!

# Reserved

# Reserved 2

a many thanks @33bca for your hard work you put into developing for our a2 lite
what bothers me most before trying your pa rom is the question if i can revert back to stock (inlcuding a/B Partitons and Stock Recovery, Encryption ) without any problem ? and if so what steps do i have to do to revert back to stock ?
normaly i would just make a backup from within twrp of my stock Phone and then do a restore if needed but as i unterstand it right thats not possible at the moment with the extisting versions of twrp for our a2 lite ? so maybe just get a2 lite into fastboot mode and flash an original fastboot image ?

Nice thanks ?

and some more questions @33bca on your instructions to install the rom:
Requirements
* Required * firmware version must be based on P-based builds.
so one must have 10.0.3.0 or 10.0.4.0 version of stock firmware on the a2 lite?
Formatting data (all user data is wiped, including internal storage) is a must if the storage was encrypted previously.
how do i find out if phone is encrypted or not ? if i goto settings and then security & location - advanced and if there under encryption and credentials at encrypt phone it says encrypted - then i have to format data (from whithin stock rom or from within twrp ?
Instructions:
Boot recovery from fastboot (TWRP recovery for Mi A2 Lite)
so here i use your bootable twrp img file (from your first link) with the command "fastboot boot recovery twrp-daisy-3.2.3-0-offain.img" ?
Format /system and /data
ist this the step you mention in the requirements or to i have to do this additionally to the step in the requirements ?
Install AOSPA zip package
just flash your pa rom within twrp ?
Install [optional] TWRP flashable
so here i flash the twrp (flashable from your second link) within twrp ?
and finally when should the "Forced encryption disabler" be flashed right after first time booting into twrp or after formating system and data ?

Yeah I need more detailed instructions to get this work ?

apelamod said:
Yeah I need more detailed instructions to get this work ?
Click to expand...
Click to collapse
Go to custom driod a2 lite twrp easyist way I've seen.besides that littwrl just flash ROM n switch slots o yea plus gapps.then u will have to reinstall twrp

ilovebytes said:
what bothers me most before trying your pa rom is the question if i can revert back to stock (inlcuding a/B Partitons and Stock Recovery, Encryption ) without any problem ? and if so what steps do i have to do to revert back to stock ?
normaly i would just make a backup from within twrp of my stock Phone and then do a restore if needed but as i unterstand it right thats not possible at the moment with the extisting versions of twrp for our a2 lite ? so maybe just get a2 lite into fastboot mode and flash an original fastboot image ?
Click to expand...
Click to collapse
rob420p said:
I would imagine u would need to use mi flash.or switch back to the other slot
Click to expand...
Click to collapse
hope you don't mind i put your quote from the other Thread into this one as i think its more usefull here now
thats what i need to know before i am gonnna give it a try - can i revert back to a completely Stock A2 lite from PA Rom with just putting the A2 lite into Fastboot Mode an flash a pie fastboot image (10.0.3.0 ore 10.0.4.0) with Miflash ?

- Camera crashes if it detects a face
Can face detecting be turned off?

@33bca after install opencamera app I have not bug Camera crashes if it detects a face

can someone who successfully install this rom make a noob-friendly guide how to install it? like how to change slot and is it mandatory to install forced encryption disabler?

adhitore said:
can someone who successfully install this rom make a noob-friendly guide how to install it? like how to change slot and is it mandatory to install forced encryption disabler?
Click to expand...
Click to collapse
Yes I like to get clean tutorial also ?

guide install
- use pie base firmware
boot to twrp :
-need to wipe /data , /system
- install zip pa
- install zip disable encryption
- optional install twrp installer
- change to slot b and boot to system after
- booted pa is fine ! install opencamera app for resolve error cam
- optional 2 : return to twrp after first boot for install : magisks , opengapps ...
adhitore said:
can someone who successfully install this rom make a noob-friendly guide how to install it? like how to change slot and is it mandatory to install forced encryption disabler?
Click to expand...
Click to collapse

ada12 said:
- use pie base firmware
-need to wipe /data , /system in twrp
- install zip pa
- install zip disable encryption
- optional install twrp installer
- change to slot b
- booted pa is fine ! install opencamera app for resolve error cam
- optional 2 : return to twrp after first boot for install : magisks , opengapps ...
Click to expand...
Click to collapse
install Gapps after change to slot b?. there is a menu in twrp to change slot or what?

Thanks dev! What about Bluetooth Slow Wifi Bug? Flickering? Are these annoying stock rom bugs fixed?

Thank you very much!

Reboot menu twrp for option slot change...
For gapps read my guide
adhitore said:
install Gapps after change to slot b?. there is a menu in twrp to change slot or what?
Click to expand...
Click to collapse

edit: USB preference cannot be selected , camera broken if you enable camera2 API

Should I unlock the bootloader first? It didn't mentioned in first post

Development [ROM][OFFICIAL] Pixel Extended ROM V4.5 Android 12.1 [alioth/aliothin][21.05.22]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
PixelExtended ROM for Poco F3/Mi11X [alioth]
What is this?
PixelExtended ROM (or PEX for short), aims to combine Pixel goodies with some essential features missing in Pixel Experience, delivering a ROM that promises you stabilty and a large amount of features at the same time. The ROM will keep it's Pixel ideologies it's primary focus and wont stray into the dark and deep void that is bloat.
Our mission is to offer maximum possible stability and security along with essential and useful features for proper functioning of a device.
Based on Android 12 (S)
Whats working?
Wifi
RIL
Mobile data
GPS
Camera
Flashlight
Camcorder
Bluetooth
Fingerprint reader
NFC
Lights
Sound/Vibration
Known issues
You tell me
Features That are Available At the Moment
Volte icon
Show 4G instead of lte
And more
As only Essesntial Features will be added so this list will updated whenever there is a new feature
NOTE :- All possible features are toggleable so you always can choose to be stockish.
DON'T FLASH GAPPS, THEY'RE ALREADY INCLUDED
Download from Sourceforge Host
Donate
Liked my work? Gift me a beer
Liked my work? Gift Aryan a beer
Stay tuned
Device Support Group
NOTE: 4.5 IS BASED ON FW 13.0.2 AND IT IS ALREADY INCLUDED IN ROM ZIP NO NEED TO FLASH SEPARATELY .​
Android OS version: 12.1
Security patch level: May 2022
Build author/Device Maintainer: Rounak1619
Kernel Source code: https://github.com/Rounak1619
Source code: https://github.com/PixelExtended
PixelExtended Developer: Aryan Gupta

How to Flash PEX 4.5
Twrp method :
• Boot to skkk TWRP
• Flash Rom with TWRP inject
• Reboot to recovery
• Format data
• Reboot to system
Flash boot and vendor_boot method
Commands: 1)flasboot flash boot boot.img
2) fastboot flash vendor_boot vendor_boot.img
3)fastboot reboot recovery
4) Format data
5) choose update from adb
6) adb sideload filname.zip
7)reboot
8)Enjoy
NOTE: 4.5 IS BASED ON FW 13.0.2 AND IT IS ALREADY INCLUDED IN ROM ZIP NO NEED TO FLASH SEPARATELY .

1 more

downloading

Good Morning, can i flash the Rom without TWRP? Any Instructions? Thank you so much.

Flash boot and vendor_boot method
Commands: 1)flasboot flash boot boot.img
2) fastboot flash vendor_boot vendor_boot.img
3)fastboot reboot recovery
4) choose update from adb
5) adb sideload filname.zip
6)reboot to recovery format data
7)reboot

"Ok google" working?

dirtytwo said:
Flash in twrp if coming from A11
Or
Flash boot and vendor_boot method
Commands: 1)flasboot flash boot boot.img
2) fastboot flash vendor_boot vendor_boot.img
3)fastboot reboot recovery
4) choose update from adb
5) adb sideload filname.zip
6)reboot to recovery format data
7)reboot
Click to expand...
Click to collapse
Thank you.

screenshots?

dirtytwo said:
Flash in twrp if coming from A11
Or
Flash boot and vendor_boot method
Commands: 1)flasboot flash boot boot.img
2) fastboot flash vendor_boot vendor_boot.img
3)fastboot reboot recovery
4) choose update from adb
5) adb sideload filname.zip
6)reboot to recovery format data
7)reboot
Click to expand...
Click to collapse
Which Flash boot and vendor_boot should be used?

11214 said:
Which Flash boot and vendor_boot should be used?
Click to expand...
Click to collapse
Check 1st reply

rounak1619 said:
Check 1st reply
Click to expand...
Click to collapse
Brilliant, excellent work.
Thank you.

how to install twrp to this rom now?

Fast charging enabled ? Also there is a bug in VoLTE icons..

Any video or audio keeps stopping for a second or two and starts again.
Anyone else have this issue?
Edit 1: Just thinking I just flashed over arrow os 12.
Then I flashed the boot, vendor and the ROM zip.
Perhaps I did that wrong some how.
Edit 2: I just deleted everything and flashed again and it's perfect.

Is Android Auto functioning on this ROM? I'm contemplating on purchasing this phone.

dirtytwo said:
Flash in twrp if coming from A11
Or
Flash boot and vendor_boot method
Commands: 1)flasboot flash boot boot.img
2) fastboot flash vendor_boot vendor_boot.img
3)fastboot reboot recovery
4) choose update from adb
5) adb sideload filname.zip
6)reboot to recovery format data
7)reboot
Click to expand...
Click to collapse
I am on casanova mimax (a11), you think just flashing rom zip from twrp and then rebooting and formating data would work ?
I've had bad experiences from fastboot flashes / sideloads and would like to sitck to twrp if possible. did someone actually flashed this rom from twrp coming from a miui rom ?
Edit : FYI, I've managed to install from twrp (dunno if it was vasi or nebrassy) by wiping data, installgin from usb otg, wiping data again (never know if it is best before or after) and rebooting. First boot was really fast, and initial setup went great restoring my google backup from yesterday made from miui. just a few stuff not working for me like double pressing power button to launch camera. Also no face unlock, and I didn't find how to remove navigation pill at the bottom of the screen (advice would be appreciated).
Also phone storage is not detected under windows 10 whereas it was with previous miui rom.
Otherwise rom is reeeeally smooth and pleasant to use !

Here are some screenshots of the ROM, this one supports Material You completely and it's been perfect so far.

Steps to flash over arrow Os 12??

So far this rom is AWESOME, the battery consumption is great, pixel implementation are there and magisk works without any hassle.
Thank you for your awesome work @rounak1619!!!

Development [UNOFFICIAL][RECOVERY] TWRP Recovery 3.7_012 (NEW - A13 AOSP BETA TEST)

TWRP Recovery Project​
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Downloads TWRP​Installation (for all MIUI roms )​
Code:
fastboot boot boot_lisa.img
We boot into the recovery and flash the zip through it.
In the Fox folder you will find magisk + RW mount. (installation optional).
We clean the dalvik and reboot into the system
Works:
ADB
Decryption of /data
MTP
Flashing (opengapps, roms, images and so on)
Backup/Restore
USB OTG
CPU temperature
Vibration
A/B partition functions
ADB SIDELOAD
SD-CARD
PS: For AOSP - Please wait
You can donate on the link below:
Donate​​
Spoiler: SCREENSHOT
OrangeFox Recovery | Build in Cloud
Device Tree TWRP
My Telegram
NEW 23/04/2023: OrangeFox BetaTest / a13 - vendorboot recovery AOSP/MIUI
Version Information
Status: Unofficial
Current Release Version: 3.7_012
Release Date: 27-Feb-2023

This is very good news, it was about time that Lisa had a recovery for Android 13.
Thanks for sharing.

What a wonderful new! Previous version for Android 12 where absolutely perfect, I am sure that this update is, or soon will be also an excellent version.
Thank you very very much!
@Dkpost3 :
I would like to send a little contribution, have you a PayPal account?
Edit: I just installed it on my Lisa running Xiaomi.eu miui 13 weekly version (Android 12): It works perfectly on Android 12, the only limit (it's a beta version) is that it can't read the ext storage. I immediately installed the update to Xiaomi.eu update to miui 14 (14.05) stable without formatting. I don't notice any problem till now.
After update the stock recovery came back so I flashed again this new one through fastboot, first I booted boot_lisa.img then I flashed it definitely from inside recovery using the zip file.
At the end I flashed successfully magisk 25.2. I am really impressed with the wonderful work of Dkpost3!

A moment ago
Add bookmark
#125
Excellent recovery. Fully functional. Very good data decryption and OTG. Only the temperature sensor is not working but that's not a big deal. Surely there will be an evolution and it will be fixed. I use MI 11 lite 5g NE (lisa), MIUI 14 global (eea) android 13.

miki1966 said:
A moment ago
Add bookmark
#125
Excellent recovery. Fully functional. Very good data decryption and OTG. Only the temperature sensor is not working but that's not a big deal. Surely there will be an evolution and it will be fixed. I use MI 11 lite 5g NE (lisa), MIUI 14 global (eea) android 13.
Click to expand...
Click to collapse
How do you install it???

quasyl said:
What a wonderful new! Previous version for Android 12 where absolutely perfect, I am sure that this update is, or soon will be also an excellent version.
Thank you very very much!
@Dkpost3 :
I would like to send a little contribution, have you a PayPal account?
Edit: I just installed it on my Lisa running Xiaomi.eu miui 13 weekly version (Android 12): It works perfectly on Android 12, the only limit (it's a beta version) is that it can't read the ext storage. I immediately installed the update to Xiaomi.eu update to miui 14 (14.05) stable without formatting. I don't notice any problem till now.
After update the stock recovery came back so I flashed again this new one through fastboot, first I booted boot_lisa.img then I flashed it definitely from inside recovery using the zip file.
At the end I flashed successfully magisk 25.2. I am really impressed with the wonderful work of Dkpost3!
Click to expand...
Click to collapse
thnks

mohamadreza40 said:
How do you install it???
Click to expand...
Click to collapse
are you having problems?

anyone tried this on MIUI 14 China ROM?

I was almost installing for aosp rom.

Greetings,....thank you very much the twrp sir...working nicely for my phone....i use miui 14 eu and android 13

PaperKing13 said:
anyone tried this on MIUI 14 China ROM?
Click to expand...
Click to collapse
Yes. It works perfectly. I flashed xiaomi.eu rom (based on cn version ) and magisk. I also did a full backup.

I've not been able to download it, but MANY THANKS for your recovery!!
Is there any other place to download it?
yandex complains about the limit of downloads
thanks!

mohamadreza40 said:
How do you install it???
Click to expand...
Click to collapse
First I booted boot_lisa.img then I flashed it definitely from inside recovery using the zip file.

Thank you very much, you did an excellent job I also directly flashed the xiaomi.eu 14.06 zip and the system booted.

miki1966 said:
First I booted boot_lisa.img then I flashed it definitely from inside recovery using the zip file.
Click to expand...
Click to collapse
I don't know how do it ... Can you help me ??

mohamadreza40 said:
I don't know how do it ... Can you help me ??
Click to expand...
Click to collapse
Unlock your bootloader (if it's not already unlocked)
Onstall adb, fastboot and related USB drivers on your PC
Restart your phone in bootloader mode
Open a command line window/terminal emulator on your PC
Change to the adb directory on your PC
Boot TWRP 3.7_012 by running: fastboot boot boot_lisa.img
After TWRP 3.7_012 has booted, check that everything is working, such as that the data partition is mounted correctly and that the touchscreen is working.
Find and select the TWRP 3.7_012 zip on your phone, tap and swipe to install it.
After installation, your phone will automatically reboot into TWRP 3.7_012
Enjoy!

miki1966 said:
Unlock your bootloader (if it's not already unlocked)
Onstall adb, fastboot and related USB drivers on your PC
Restart your phone in bootloader mode
Open a command line window/terminal emulator on your PC
Change to the adb directory on your PC
Boot TWRP 3.7_012 by running: fastboot boot boot_lisa.img
After TWRP 3.7_012 has booted, check that everything is working, such as that the data partition is mounted correctly and that the touchscreen is working.
Find and select the TWRP 3.7_012 zip on your phone, tap and swipe to install it.
After installation, your phone will automatically reboot into TWRP 3.7_012
Enjoy!
Click to expand...
Click to collapse
Thanks my friend

Dkpost3 said:
are you having problems?
Click to expand...
Click to collapse
No just i try it

xabier-bo said:
I've not been able to download it, but MANY THANKS for your recovery!!
Is there any other place to download it?
yandex complains about the limit of downloads
thanks!
Click to expand...
Click to collapse

pls check
CPU temperature * Test Build
Vibration * Test Build
SD-CARD ** Test Build