Hi i have bootloop problems on this device. When i do factory reset in recovery mode samsunf logo blinks as it wants to start system but it restarts. Then second time samsung logo doesnt even finish until i do factory reset then logo blinks again and restarts after some time.
The code is (reboot recovery cause is check_boot_mode recoverybootmodewithkey)
Block based ota
Ive tried to flash device multiple times with different stock roms with same results.
If i flash with oreo its the same error code but with addition when doing fastory reser something about some cache in first deletion and a number 0
In pie that code is not present which i assume that device is ment for pie. Both frp and oem are locked.
When i flash combination file its rpmb provisioned and rpmb fused 1. In z3x box there is no option to fix that. And that is strange because as i remember while i was doing repair on samsung s8 it was easy. Factory binary was there but not on this budget model which is strange. I even tried to force error so it triggers emergency recovery mode for smart switch but smart switch is just aweful. I dont even get recognition in that program. It shows as unsuppported model. I reinstalled drivers as well it just doesnt work. Now i would be glad and it would be awesome to get into fastboot mode just so i write down commands. Adb sideload doesnt have those options. Since i understood adb and fastboot for me its number one solution for everything. But how the hell am i supposed to get into fastboot on this model. Im pretty sure block based ota is sign that its blocked becuase of oem unlock aka locked bootloader. Its a friends phone and i tell people dont do stuff if you dot know ehat you are doing. But even locked bootloaders and frp locked are fixable. Especially with multiple brains on XDA and GSMforums.
Does anybody have any solutuon to this problem because this is some kind of new security method which was not present on like 2 years before.
P. S Is there any combination out there made out of Pie?
I fixed the issue. Front camera was defected. Some type of short circuit. Main camera auto focus mechanism also defected. It works allright as soon you detach all cameras. The only problem which i have with this device is that Samsung is using same concept as HTC. One camera defected all cameras not working. This is new from Samsung because in past when one camera brakes camera app still works. Autofocus mechanism can break with fall of the phone. Its not an software issue!!!
i have a similar problem do find solution?
I recently tried to install a custom ROM in my samsung j6+ but halfway through it my PC turned off.
Then the problem starts i decided to reboot my phone but it shows this error "No command" " #Reboot recovery cause is [[check_bootmode]RebootRecoveryWithKey]#
Block-based OTA
Supported API: 3
# MANUAL MODE v1.0.0#
E:Failed to mount / cache: Invalid argument
The error message keeps appearing for just a fraction of a second then disappear and appear again
I tried to go to recovery mode but no luck i cant get to it
I drained the battery to turn off the device then go download mode but after get to it, it also keep restarting
help me please. thank you
Related
I have a bone stock 2013 Nexus 7 32 Gb Wifi, never had a problem with it. A few weeks ago, it notifies me of an update (Lollipop) so I apply it. Nothing but problems since then. It was very laggy and would glitch every few seconds while playing video (either local files or streamed over Plex, both had same issue). Sometimes when I'd wake it from sleep, the screen would look like an old CRT TV with static (except it wasn't moving, it was a fixed image). It would hang like this for seconds or sometimes minutes. Rebooting would usually resolve this for a while.
Tried a few 'lollipop tuning' tweaks, but when these failed to fix the video glitching and lagginess, I decided to revert to kitkat and followed an online tutorial (exactly like the one here except it had me install a standalone ADB/fastboot instead of full SDK) . No problem installing USB driver or setting nexus into USB mode. No problem getting it into fastboot mode and "fastboot devices" correctly listed the device, and "oem unlock" appeared to work fine as well. Running the flash-all batch file also seemed to go normally. But now my device is even worse than before:
- won't boot/run normally... no boot-up logo or video ever displays (or if it does, it's just a partial static image). Appears to get to a 'welcome' screen but the display is all messed (part of the screen is just repeated several times, so you can't see the entire screen). Unresponsive to touch, though it will make some sounds when you press in certain areas, but the display never changes. If I sleep it and wake it up, it shows the 'CRT static' mentioned above for many seconds before showing slowing showing the tiled/corrupted welcome screen. I can access the nexus' file system over USB on my PC even while it's in this borked state.
- display is now blank when getting into fastboot mode... i can time pushing the down-volume and power button so I know I am in fastboot mode ('fastboot devices' correctly lists the device) but the display is now completely black (not on, no backlight) in this mode.
I tried flashing to factory 4.4.4, 4.3, and 4.2 (always using 2013 wifi images) and it doesn't make a difference. Same results. Is there some bit of code that doesn't get reflashed during this reset that could explain why I'm having these issues? Any advice how to fix?
flyingsherpa said:
I have a bone stock 2013 Nexus 7 32 Gb Wifi, never had a problem with it. A few weeks ago, it notifies me of an update (Lollipop) so I apply it. Nothing but problems since then. It was very laggy and would glitch every few seconds while playing video (either local files or streamed over Plex, both had same issue). Sometimes when I'd wake it from sleep, the screen would look like an old CRT TV with static (except it wasn't moving, it was a fixed image). It would hang like this for seconds or sometimes minutes. Rebooting would usually resolve this for a while.
Tried a few 'lollipop tuning' tweaks, but when these failed to fix the video glitching and lagginess, I decided to revert to kitkat and followed an online tutorial (exactly like the one here except it had me install a standalone ADB/fastboot instead of full SDK) . No problem installing USB driver or setting nexus into USB mode. No problem getting it into fastboot mode and "fastboot devices" correctly listed the device, and "oem unlock" appeared to work fine as well. Running the flash-all batch file also seemed to go normally. But now my device is even worse than before:
- won't boot/run normally... no boot-up logo or video ever displays (or if it does, it's just a partial static image). Appears to get to a 'welcome' screen but the display is all messed (part of the screen is just repeated several times, so you can't see the entire screen). Unresponsive to touch, though it will make some sounds when you press in certain areas, but the display never changes. If I sleep it and wake it up, it shows the 'CRT static' mentioned above for many seconds before showing slowing showing the tiled/corrupted welcome screen. I can access the nexus' file system over USB on my PC even while it's in this borked state.
- display is now blank when getting into fastboot mode... i can time pushing the down-volume and power button so I know I am in fastboot mode ('fastboot devices' correctly lists the device) but the display is now completely black (not on, no backlight) in this mode.
I tried flashing to factory 4.4.4, 4.3, and 4.2 (always using 2013 wifi images) and it doesn't make a difference. Same results. Is there some bit of code that doesn't get reflashed during this reset that could explain why I'm having these issues? Any advice how to fix?
Click to expand...
Click to collapse
So your bootloader is blank right? I would flash a new bootloader asap! And see if that fixes anything
noahvt said:
So your bootloader is blank right? I would flash a new bootloader asap! And see if that fixes anything
Click to expand...
Click to collapse
I have to confess my ignorance here... I'm brand new to flashing android like this so I don't know the answer to your question. If part of tutorial I followed blanks out the bootloader (and doesn't write something in?)... then you're probably right. I shall look into this more tonight when I'm at home with the nexus. Thanks for at least giving me something to look into, that's exactly what I was hoping for!
This sounds more like a hardware issue than software to me. See if you can get a warranty repair or replacement.
From another thread by a user with a blank screen like yours:
Asus_USA said:
a7medmo7eb - We're very sorry to hear of this. Kindly email us at [email protected] with this copied problem description along with the serial number of your tablet and we will do our best to provide you with troubleshooting and servicing options.
If you have any further questions, comments or concerns please do not hesitate to let us know. We will be more than happy to assist you. Once again, thank you for choosing ASUS products and services.
Thank you.
-In Search of Incredible-
Technical Support Department
http://www.asus.com :: http://service.asus.com/
Click to expand...
Click to collapse
nhizzat said:
This sounds more like a hardware issue than software to me. See if you can get a warranty repair or replacement.
From another thread by a user with a blank screen like yours:
Click to expand...
Click to collapse
Thanks, you're probably right. I did read up to understand all this stuff a bit more, so I know it's not lack of a bootloader or anything. All img files install just fine, so my pc can talk to the nexus, just the screen is all wonky no matter what i do.
Unfortunately I bought this 1.5 years ago so I don't think it's under warranty anymore. Everything was fine until I updated to Lollipop! Seems a big coincidence that I had a hardware failure at the same time as that update... I feel like Google ruined my tablet...
There is a bug where sometimes when you unlock the bootloader it zeros out the data partition. This might be the cause of your problem. It happened to me when I unlocked mine and I got stuck in a bootloop where it kept booting into recovery then shutting off. I fixed the problem by using fastboot to format data. Also, the flashall script didnt work for me. I put all the .img files in the same folder as fastboot then used these commands.
fastboot format data
fastboot flash system system.img
fastboot flash boot boot.img
fastboot flash recovery recovery.img
after this I booted into recovery and did a factory reset for good measure and the problem was fixed. This may solve your problem. It may also be possible that you got a bad download. I hope this helps you
Masterchief87 said:
There is a bug where sometimes when you unlock the bootloader it zeros out the data partition. This might be the cause of your problem. It happened to me when I unlocked mine and I got stuck in a bootloop where it kept booting into recovery then shutting off. I fixed the problem by using fastboot to format data. Also, the flashall script didnt work for me. I put all the .img files in the same folder as fastboot then used these commands.
fastboot format data
fastboot flash system system.img
fastboot flash boot boot.img
fastboot flash recovery recovery.img
after this I booted into recovery and did a factory reset for good measure and the problem was fixed. This may solve your problem. It may also be possible that you got a bad download. I hope this helps you
Click to expand...
Click to collapse
Hmm, thanks for the idea, but fastboot wouldn't do "format data", giving me the error: Formatting is not supported for filesystem with type ' '
Googling that makes it not look good. Weird, thing is, it still technically boots up, just the screen is so wonky you can't see where you are or interact with it properly. Not sure what else to try (opening it up and re-seating touchscreen cables?).
Hi all,
My Nexus 5x (16gb - all stock.) went and soft bricked today. Not sure why - just seemed to start wanting to constantly restart - never making it past the white google text part of the boot process. Not sure if it's an update or hardware. No trauma or dropping of the phone - which makes me think s/w rather than h/w.
I have attempted to install a rescue OTA update (instructions I followed are from technobill - don't have enough posts to add a link). However, when running "adb sideload <file>" I get a "failed to read command" error. Have tired multiple cables/ports however to no avail.
(Recovery screen shows the following build details: 7.0/NBD90W/3239497)
Any ideas?
Thanks.
Somewhat Irked
SomewhatIrked said:
Hi all,
My Nexus 5x (16gb - all stock.) went and soft bricked today. Not sure why - just seemed to start wanting to constantly restart - never making it past the white google text part of the boot process. Not sure if it's an update or hardware. No trauma or dropping of the phone - which makes me think s/w rather than h/w.
I have attempted to install a rescue OTA update (instructions I followed are from technobill - don't have enough posts to add a link). However, when running "adb sideload <file>" I get a "failed to read command" error. Have tired multiple cables/ports however to no avail.
(Recovery screen shows the following build details: 7.0/NBD90W/3239497)
Any ideas?
Thanks.
Somewhat Irked
Click to expand...
Click to collapse
Did your phone just reboot in the middle of doing something innocuous then start bootlooping? Were/Are you on total stock with bootloader locked? If both yes, it is probably hardware issue you are encountering.
Regarding sideloading, did you place your Android recovery in sideload mode?
Did you verify adb can "see" your device using "adb devices"?
SomewhatIrked said:
Hi all,
My Nexus 5x (16gb - all stock.) went and soft bricked today. Not sure why - just seemed to start wanting to constantly restart - never making it past the white google text part of the boot process. Not sure if it's an update or hardware. No trauma or dropping of the phone - which makes me think s/w rather than h/w.
I have attempted to install a rescue OTA update (instructions I followed are from technobill - don't have enough posts to add a link). However, when running "adb sideload <file>" I get a "failed to read command" error. Have tired multiple cables/ports however to no avail.
(Recovery screen shows the following build details: 7.0/NBD90W/3239497)
Any ideas?
Thanks.
Somewhat Irked
Click to expand...
Click to collapse
Well luckily I made this post today.
The more this goes on, the more I believe it to be hardware ...
@sfhub - reasonably innocuous. Had just opened one or 2 apps that morning. Not sure what had updated overnight app/os wise. Not anything interesting as far as I can tell. Once I managed to get it into recovery "adb devices" was returning the phone.
@bardhi92 - I saw that once I got in. However, I couldn't get it to see my phone.
Updated things I have tried and why I've all but thrown in the towel:
After the OTA rescue sideload failed I started trying a few different things. It stopped taking me into recovery mode more frequently, at least it seemed that way - it would just keep bootlooping. My main issue is that I has a locked bootloader, which stopped me whacking TWRP on and loading on a custom rom - just to see if that worked.
I thought it might let me sideload on a factory default img file. Turns out nope.
However I used NRT to "Flash Stock + Unroot" (with "Soft Brick/Bootloop" checked) which for some reason, then allowed me to get back into recovery mode. I had also removed the sim card/tray at this point. May have been either or neither of those that allowed me to get into recovery mode. Can't say for certain.
I cleared /cache and /data and then attempted the OTA rescue update again. This time it failed at 45% (according to my cmd prmpt) with the error: "* failed to read command: No error". I'm not sure text was on the phone at the time. But it did manage to boot into Android. I quickly stepped through the various intro steps (putting in the sim, adding my mail google account details).
I went to get a beer. Only to find it boot looping again.
Not to be deterred, I vowed to try again. Same steps as before (remove sim, nrt voodoo). This time however the OTA rescue worked and fully completed. I went through the intro steps again. This time I quickly turned on dev options, enabled usb debugging and sorted out the OEM bootloader. I thought this would be smart, just in case it hapened again. Once I chose to unlock ("fastboot reboot", selected yes), it decided to start boot looping again.
The main annoyance is: I don't think I have any proof of purchase, even though it's in warranty. That, and I now live in Dubai - so shipping back to the UK where I brought it is going to be killer. But I think it's the path of least resistance at the moment.
SomewhatIrked said:
The more this goes on, the more I believe it to be hardware ...
@sfhub - reasonably innocuous. Had just opened one or 2 apps that morning. Not sure what had updated overnight app/os wise. Not anything interesting as far as I can tell. Once I managed to get it into recovery "adb devices" was returning the phone.
@bardhi92 - I saw that once I got in. However, I couldn't get it to see my phone.
Updated things I have tried and why I've all but thrown in the towel:
After the OTA rescue sideload failed I started trying a few different things. It stopped taking me into recovery mode more frequently, at least it seemed that way - it would just keep bootlooping. My main issue is that I has a locked bootloader, which stopped me whacking TWRP on and loading on a custom rom - just to see if that worked.
I thought it might let me sideload on a factory default img file. Turns out nope.
However I used NRT to "Flash Stock + Unroot" (with "Soft Brick/Bootloop" checked) which for some reason, then allowed me to get back into recovery mode. I had also removed the sim card/tray at this point. May have been either or neither of those that allowed me to get into recovery mode. Can't say for certain.
I cleared /cache and /data and then attempted the OTA rescue update again. This time it failed at 45% (according to my cmd prmpt) with the error: "* failed to read command: No error". I'm not sure text was on the phone at the time. But it did manage to boot into Android. I quickly stepped through the various intro steps (putting in the sim, adding my mail google account details).
I went to get a beer. Only to find it boot looping again.
Not to be deterred, I vowed to try again. Same steps as before (remove sim, nrt voodoo). This time however the OTA rescue worked and fully completed. I went through the intro steps again. This time I quickly turned on dev options, enabled usb debugging and sorted out the OEM bootloader. I thought this would be smart, just in case it hapened again. Once I chose to unlock ("fastboot reboot", selected yes), it decided to start boot looping again.
The main annoyance is: I don't think I have any proof of purchase, even though it's in warranty. That, and I now live in Dubai - so shipping back to the UK where I brought it is going to be killer. But I think it's the path of least resistance at the moment.
Click to expand...
Click to collapse
So, you flashed the .TOT file, sideloaded the given OTA within the stock recovery bootloader that comes with the .TOT file, and cleared cache/factory reset?
Please condense it. If you managed to start up the phone, that's a huge success for people who have not been able to yet.
bardhi92 said:
So, you flashed the .TOT file, sideloaded the given OTA within the stock recovery bootloader that comes with the .TOT file, and cleared cache/factory reset?
Please condense it. If you managed to start up the phone, that's a huge success for people who have not been able to yet.
Click to expand...
Click to collapse
In short:
OTA rescue failed during adb sideload,
Tried bullhead-nbd90w-factory-d2f11c5f.zip & removed sim tray - seemed to allow access to recovery mode,
OTA rescue claims to have failed at 47% during adb sideload- still booted into android. However briefly. Went back to bootloop,
Tried bullhead-nbd90w-factory-d2f11c5f.zip & removed sim tray - seemed to allow access to recovery mode,
OTA rescue completed via adb sideload,
Turned on dev options (usb debug, oem unlock),
Booted to fastboot - unlocked bootloader. Now back to bootlooping
@bardhi92 - I could not get the LG utility to detect my phone. Will attempt again tomorrow.
SomewhatIrked said:
@bardhi92 - I could not get the LG utility to detect my phone. Will attempt again tomorrow.
Click to expand...
Click to collapse
IMO you shouldn't flash the TOT file. If you end up bootlooping again, your phone will be stuck in bootloader locked mode with no ability to unlock it.
If you were able to get your phone to boot into android once, there is really nothing the TOT file will do for you that you can't do from TWRP or bootloader, whereas once it locks your bootloader, there are problems you can no longer fix like EFS corruption (which likely isn't your problem).
In the end, you probably do have eMMC that is slowly starting to fail. There is usually error correction on the eMMC that can lock out bad blocks but if it gets to serious, it'll fail. This is why reflashing stuff over and over sometimes works.
My daughter has been using this phone, but never backed her photos up. Now it won't boot and she is worried they are lost forever. I've been trying to help, but only seem to make things worse.
1. She never enabled USB debugging, or rooted it
2. She could not tell me whether she had allowed the OTA upgrades.
3. It got into a reboot loop a few days ago. It would start to boot, then say it was optimising a random number of apps (anything between 90 and 158) and then start over. Wileyfox tech support told me that this was due to an incompatibility between Cyanogen and the latest Facebook Update.
4. They sent me a link to the FOTA files with instructions how to progressively upgrade to Android 7 (TOS111B)
5. They couldn't tell me how to determine whether it was running CM12 or CM13 (I now realise that I could have looked at the log files in the recovery partition)
6. I therefore assumed that it was running CM12. I used their instructions to go into recovery and manually update from SD card to ZNH0EAS2NH from there to ZNH2KAS7EB and then to TOS111B
7. Fatally I did not reboot between updates. At the end I had the Wileyfox splash screen black on white, and then got an animation with it red on white. It then got stuck.
8. I then tried using fastboot to go back to the original version of the OS so I could start over. I found the fastboot image and I flashed the boot and system partitions.
9. Now on boot it either gets stuck on the black on white boot screen, or it displays it for a second and then turns off.
Can anyone help me? - I think my daughter will have a nervous breakdown if I don't find a way of recovering her photos. Recovering the photos is more important than unbricking the phone.
jerrytaff said:
My daughter has been using this phone, but never backed her photos up. Now it won't boot and she is worried they are lost forever. I've been trying to help, but only seem to make things worse.
1. She never enabled USB debugging, or rooted it
2. She could not tell me whether she had allowed the OTA upgrades.
3. It got into a reboot loop a few days ago. It would start to boot, then say it was optimising a random number of apps (anything between 90 and 158) and then start over. Wileyfox tech support told me that this was due to an incompatibility between Cyanogen and the latest Facebook Update.
4. They sent me a link to the FOTA files with instructions how to progressively upgrade to Android 7 (TOS111B)
5. They couldn't tell me how to determine whether it was running CM12 or CM13 (I now realise that I could have looked at the log files in the recovery partition)
6. I therefore assumed that it was running CM12. I used their instructions to go into recovery and manually update from SD card to ZNH0EAS2NH from there to ZNH2KAS7EB and then to TOS111B
7. Fatally I did not reboot between updates. At the end I had the Wileyfox splash screen black on white, and then got an animation with it red on white. It then got stuck.
8. I then tried using fastboot to go back to the original version of the OS so I could start over. I found the fastboot image and I flashed the boot and system partitions.
9. Now on boot it either gets stuck on the black on white boot screen, or it displays it for a second and then turns off.
Can anyone help me? - I think my daughter will have a nervous breakdown if I don't find a way of recovering her photos. Recovering the photos is more important than unbricking the phone.
Click to expand...
Click to collapse
Since posting this I have had a partial success. A more complete set of fastboot flashing using the TOS111B fastboot images has got me to a phone that boots. Many of the apps work. However...
a) I get an "unfortunately the process com.android.phone has stopped" appearing almost as fast as I can close the app making it very difficult to get anything off the phone. However, I did manage to set up a google sync to upload the photos.
b) my daughter now tells me that her SMS's are vital.... and the messaging app says " getting message" then closes down
c) I cannot enable developer setting to enable usb debug mode. I can get into the phone status page under settings. Repeated tapping on the android version brings up the nougat splash screen, but the 7 taps (or 700 for that matter) on build number does nothing whatsoever.
Does anyone have any ideas how to recover to a fully working system without doing a factory reset?
I suspect that the sms database would have gone when the cache was cleared. Can anyone confirm that to be the case before I spend any more time trying to recover them?
Hi Jerry ,
Exactly the same problem here. Could you tell me where you've found the TOS111B fastboot images?
Thx!
Have you tried booting into safe mode?
I think you do that by pressing and holding the volume down down button during reboot.
If you can manage that you may be able to dissable the apps that are causing the crash.
Hello fellow android lovers!
I need help with said Smartphone from everyone with a knowledge bigger than mine.
Ill start from the beggining:
Friend of mine had this phone for a really long time. The condition of said device is nearly new (Few minor scratches here and there).
He decided not so long ago, to change his phone to newer one, so that one went to the drawer where it was for like a year or so.
He came to me a week ago with this phone, because he wanted to give it to his child as a first smartphone.
On that HTC device, after booting the system, there is a notification "Decrypt Storage" where you need to enter password to decrypt ROM memory. He said he never used any password on his device and even on new smartphone, he did not put any lock kode or pattern.
After entering any password, even with one letter, the notification says: "The password is correct, but unfortunately your data is corrupt" then there is a "reset phone" whitch restores smartphone to factory state.
Sadly, this doesnt work. It shows the same notification after factory reset. More like a bootloop but with a note.
I tried to hard reset it, but after i choose in bootloader "Factory reset", it takes me to main menu of bootloader and it says "Failed"
I also tried to get to the phone via USB. I installed htc usb drivers, got the binares to unlock bootloader and the fastboot option works, adb isn't.
I tried to use Fastboot factory resset command, tried also flashing TWRP recovery and nothing.
The wierd thing is, that the bootloader unlock binaries is not working as i see on the device because after "Unlocking" Bootloader, i go to the Bootloader menu and it allways says:
*****LOCKED*****
*****SOFTWARE STATUS: MODIFIED*****
*****SECURITY WARNING*****
Click to expand...
Click to collapse
The wierd thing is, that software status was modified even when he gave me this phone to work with. He is not the type of android poweruser. I doubt that he will modify his software.
Can somone help me with some tips how to flash a new system or get this device to work? I am banging my head on the wall right now. I am out of options.
I'm sorry if the post is not in the right place.
I own a z2 force that turned itself off and the rear camera did not work.
Putting the "power low" message on the recovery screen, even when the full charge appeared, after a time off "power ok" was displayed.
One moment he did not call any more and I tried bootloader, but without being able to activate usb debugging (my fatal error!), Now the message "your device is corrupted. It can not be trusted and it does not boot" and I can not unlock bootloader nor flash a new rom to boot the device.
obs: camera and battery problems appeared after the upgrade via ota to 8.0 actions
Solved.
eriton carlos said:
I'm sorry if the post is not in the right place.
I own a z2 force that turned itself off and the rear camera did not work.
Putting the "power low" message on the recovery screen, even when the full charge appeared, after a time off "power ok" was displayed.
One moment he did not call any more and I tried bootloader, but without being able to activate usb debugging (my fatal error!), Now the message "your device is corrupted. It can not be trusted and it does not boot" and I can not unlock bootloader nor flash a new rom to boot the device.
obs: camera and battery problems appeared after the upgrade via ota to 8.0 actions
Click to expand...
Click to collapse
I was able to start the device after hours looking for a solution, now I'm flashing a new rom to try to fix the camera problem and automatic shutdown.
How do you solve it?
I usually buy second hand Motorola phones (also this ATT Z2F), but I've never met the problem on individual hardwares yet (like camera, fingerprint sensor). Almost errors can be solved via flashing a right firmware. I think you can now flash fw via Lenovo Moto Smart Assistant (LMSA). If you use flashall.bat method, just take a look at the xml file and compare it to the content of flashall.bat (two types can be opened by Notepad, Notepad++ is recommended). The xml one shows what will be flashed.
For example: in the xml one has oem.img_sparsechunk.0-1-2, but in flashall.bat only has: fastboot flash oem oem.img
If you continue, your phone won't boot.
You have to edit flashall.bat:
fastboot flash oem oem.im_sparsechunk.0
fastboot flash oem oem.im_sparsechunk.1
fastboot flash oem oem.im_sparsechunk.2
Save and continue your works.
The xml is the standard file for RSD Lite. But, RSD seems not to be supported on recent PC hardwares, so step-by-step fastboot or flashall.bat is recently used. Therefore, just take a look before flashsing (other preparations won't be mentioned here). You should flash the equal or higher version to your current fw version on your phone.
Hope this works for you all.
i'm facing same problem,
eriton carlos said:
I was able to start the device after hours looking for a solution, now I'm flashing a new rom to try to fix the camera problem and automatic shutdown.
Click to expand...
Click to collapse
how you get repaired your phone?