Develop Bugs

[Overlay ROM][Nougat][Pie][Athene] Kali-NetHunter v 3.0 [20-03-2019]]

FOR EDUCATIONAL PURPOSE ONLY !!!
Code:
/* #include<read.it>
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/
/* #include<nethunter.h>
* Your warranty is void as soon as you unlocked your bootloader.
* Although Kali Nethunter should be safe to use, I am not responsible for whatever happens to your device,
* router, or whatever networking infrastructure because of YOU misusing the available facilities of Kali Nethunter.
* Remember that while Kali can be absolutely safe, if you handle root access improperly, no one will help you.
* Make sure you read all of the info here and have some basic knowledge about networking, kernels and Linux/Unix.
* Even if you're able to find a vulnerability on a different host (often called victim), don't misuse the advantage you have.
* Report the issue to the device's owner and the OEM. Do not complain if the attacks aren't working.
*
*/
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
INTRODUCTION
A project by Offensive Security
NetHunter - Mobile Penetration Testing Platform
The Kali NetHunter is an Android penetration testing platform targeted towards Nexus and OnePlus devices built on top of Kali Linux, which includes some special and unique features. Of course, you have all the usual Kali tools in NetHunter as well as the ability to get a full VNC session from your phone to a graphical Kali chroot, however the strength of NetHunter does not end there. We've incorporated some amazing features into the NetHunter OS which are both powerful and unique. From pre-programmed HID Keyboard (Teensy) attacks, to BadUSB Man In The Middle attacks, to one-click MANA Evil Access Point setups, access to the Offensive Security Exploit Database... And yes, NetHunter natively supports wireless 802.11 frame injection with a variety of supported USB NICs.
FEATURES
Kali NetHunter Application
* Home Screen - General information panel, network interfaces and HID device status.
* Kali Chroot Manager - For managing chroot metapackage installations.
* Check App Update - For checking Kali NetHunter Android App updates.
* Kali Services - Start / stop various chrooted services. Enable or disable them at boot time.
* Custom Commands - Add your own custom commands and functions to the launcher.
* MAC Changer - Change your Wi-Fi MAC address (only on certain devices)
* VNC Manager - Set up an instant VNC session with your Kali chroot.
* HID Attacks - Various HID attacks, Teensy style.
* DuckHunter HID - Rubber Ducky style HID attacks.
* BadUSB MITM Attack - Nuff Said.
* MANA Wireless Toolkit - Setup a malicious Access Point at the click of a button.
* MITM Framework - Inject binary backdoors into downloaded executables on the fly.
* NMap Scan - Quick Nmap scanner interface.
* Metasploit Payload Generator - Generating Metasploit payloads on the fly.
* Searchsploit - Easy searching for exploits in the Exploit-DB.
3rd Party Android Applications (WIP)
* NetHunter Terminal Application
* DriveDroid
* USB Keyboard
* Shodan
* Router Keygen
* cSploit
Remember that there might be many other exploits and attack features available online, the ones mentioned above are officially documented by Kali. Secondly, not much support will be possible regarding the attacking since not everyone will have the same opportunities.
INSTALLATION INSTRUCTIONS
PREREQUISITES
1. Unlocked Bootloader
2. Rooted ROM (Recommened SuperSu)
3. [ROM][OFFICIAL] Resurrection Remix v5.8.4 [7.1.2_r29][XT16xx][athene] (My Nethunter Currently Supports Only This ROM) (From August 24th Build Only)
4. Custom Recovery (TWRP)
FLASHING STEPS
IMPORTANT NOTE: BEFORE FLASHING NETHUNTER OVERLAY ROM, RESSURECTION REMIX ROM SHOULD BE FLASHED FIRST !!!
* Reboot to Recovery and flash the downloaded zip.
POST INSTALLATION STEPS
1. Open NetHunter App and grant all the permissions it asks.
2. Open NetHunter Terminal and grant all the permissions it asks.
3. Set up Hacker Keyboard.
4. Configure Kali Services, such as SSH.
5. Set up custom commands.
6. Initialize the Exploit Database.
POST INSTALLATION STEPS FOR CHROOT
Important Otherwise you will not get [email protected] prompt in terminal
There Are Two Methods To Install It The First Step is recommended, If you Clean Flash Different Rom`s Again And Again. Also keep it Somewhere Else Also, because it will get deleted after chroot gets installed.
1. Use Sdcard(Download It. And keep it in root(/storage/emulated/0/) directory)
Download Full or Minimal From This Website
[url]https://build.nethunter.com/kalifs/kalifs-latest/[/URL]​a. kalifs-armhf-minimal.tar.xz (137.3 Mb)​b. kalifs-armhf-full.tar.xz (815.7 Mb)​​
​2. Use Network Installation.
DOWNLOAD LINKS
1.update-nethunter-athene-nougat-1.0.zip
2.[28-10-2017] update-nethunter-athene-nougat-1.0.zip
md5: 5c078d46f42099981e1e34031cbbc110
FREQUENTLY ASKED QUESTIONS
1. Where to get training,tutorials,guide ?
Ans: Offensive Security has released the official training guide and a book called "KALI LINUX REVELED" at this website https://kali.training.
CREDITS
* @Jleeblanch {For his kernel sources and adding HID support to Resurrection Remix ROM. }
* @Silesh.Nair {For providing the HID patch file for athene. }
XDA:DevDB Information
Kali-NetHunter, ROM for the Moto G4 Plus
Contributors
Dhanush-raj, Jleeblanch, Silesh.Nair
Source Code: [url]https://github.com/offensive-security/kali-nethunter[/URL]
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Currently Supported For Ressurection Remix Only (From 24 Aug Build)
Version Information
Status: Stable
Current Stable Version: 1.0
Stable Release Date: 2017-08-27
Created 2017-08-27
Last Updated 2017-10-29

This is my first thread so, if any mistakes found, correct me !!!

Change Log :

A ROM, seriously? It's just a kernel patched and a few apps.

xAnkris said:
A ROM, seriously? It's just a kernel patched and a few apps.
Click to expand...
Click to collapse
There is a little more to it than that actually. It's an overlay that can be used on any ROM, but currently the only ROM that supports the full functionality is RR as I have merged the SEPolicy commits needed in my device source, as well as the kernel I ship with RR has the patch as well. InvictaOS also has the kernel patched, but I'm not sure if he ever merged the SEPolicy commits into his device source.
Give the guy some credit, otherwise move on and say nothing.

Jleeblanch said:
There is a little more to it than that actually. It's an overlay that can be used on any ROM, but currently the only ROM that supports the full functionality is RR as I have merged the SEPolicy commits needed in my device source, as well as the kernel I ship with RR has the patch as well. InvictaOS also has the kernel patched, but I'm not sure if he ever merged the SEPolicy commits into his device source.
Give the guy some credit, otherwise move on and say nothing.
Click to expand...
Click to collapse
#Respect

.......................................................................................

We have to just flash it no clearing anything right,I'm on RR 5.8.4 athene
sent from beast

xAnkris said:
A ROM, seriously? It's just a kernel patched and a few apps.
Click to expand...
Click to collapse
I changed the thread name. I new it, forgot to add it.
Jleeblanch said:
There is a little more to it than that actually. It's an overlay that can be used on any ROM, but currently the only ROM that supports the full functionality is RR as I have merged the SEPolicy commits needed in my device source, as well as the kernel I ship with RR has the patch as well. InvictaOS also has the kernel patched, but I'm not sure if he ever merged the SEPolicy commits into his device source.
Give the guy some credit, otherwise move on and say nothing.
Click to expand...
Click to collapse
Thank you sir...for your support...
siddhesh9146 said:
.......................................................................................
Click to expand...
Click to collapse
What are you trying to say?
dsbalu said:
We have to just flash it no clearing anything right,I'm on RR 5.8.4 athene
sent from beast
Click to expand...
Click to collapse
No nothing clearing.

xAnkris said:
A ROM, seriously? It's just a kernel patched and a few apps.
Click to expand...
Click to collapse
What a post! You should be glad that some people try to make stuff for us to enjoy!

Everything thing is working fine now thank you @Dhanush-raj
sent from beast

dsbalu said:
Everything thing is working fine now thank you @Dhanush-raj
sent from beast
Click to expand...
Click to collapse
Welcome...:good:

Hello,
First of all, thank you for bringing this to our device. This is something I have never used and I definitely am going to.
Which brings me to my question - You say that SuperSu is recommended, but I am using Magisk (RR for Athene comes pre-rooted using it). I opened the zip file and found a SuperSu folder. If I flash Kali Nethunter, will it cause problems or it can be used with Magisk as well?

baunthiyal said:
Hello,
First of all, thank you for bringing this to our device. This is something I have never used and I definitely am going to.
Which brings me to my question - You say that SuperSu is recommended, but I am using Magisk (RR for Athene comes pre-rooted using it). I opened the zip file and found a SuperSu folder. If I flash Kali Nethunter, will it cause problems or it can be used with Magisk as well?
Click to expand...
Click to collapse
You are welcome,definitely give it a try. I don't know about it. But I am using magisk which comes pre-rooted with RR and I flash the superSu which is in kali- Nethunter. What I noticed is just the superuser app gets replaced with SuperSU instead of magisk. And everything works fine for me..

Thank you for this great stuff...
Sadly, I'm facing an issue which in my guess is not the overlay's fault.
badchecksum error whenever I try to install chroot.
Does anyone have the link to manually download the .tar file and install it through sdcard?

teckgiik101 said:
Thank you for this great stuff...
Sadly, I'm facing an issue which in my guess is not the overlay's fault.
badchecksum error whenever I try to install chroot.
Does anyone have the link to manually download the .tar file and install it through sdcard?
Click to expand...
Click to collapse
I also had the same problem @Dhanush-raj suggested me this
”https://build.nethunter.com/kalifs/kalifs-latest
From this website download the kalifs-armhf-full.tar.xz and keep in the root of the sdcard. That's it open Kali chroot manager and select the use sdcard option. After 10 min chroot will be installed."
sent from beast

dsbalu said:
I also had the same problem @Dhanush-raj suggested me this
”https://build.nethunter.com/kalifs/kalifs-latest
From this website download the kalifs-armhf-full.tar.xz and keep in the root of the sdcard. That's it open Kali chroot manager and select the use sdcard option. After 10 min chroot will be installed."
sent from beast
Click to expand...
Click to collapse
I got to the same URL after a simple google search. Thanks anyways!:highfive:

Dhanush-raj said:
You are welcome,definitely give it a try. I don't know about it. But I am using magisk which comes pre-rooted with RR and I flash the superSu which is in kali- Nethunter. What I noticed is just the superuser app gets replaced with SuperSU instead of magisk. And everything works fine for me..
Click to expand...
Click to collapse
Can't try it anymore. I'm back to stock due to other reasons.
I thought about it in another way.
1. Install Kali Nethunter.
2. Uninstall SuperSU using this - https://forum.xda-developers.com/showpost.php?p=63615067&postcount=2459
(thanks to @osm0sis)
3. Install Magisk.
I'll try this around 9th or 10th.

baunthiyal said:
Can't try it anymore. I'm back to stock due to other reasons.
I thought about it in another way.
1. Install Kali Nethunter.
2. Uninstall SuperSU using this - https://forum.xda-developers.com/showpost.php?p=63615067&postcount=2459
(thanks to @osm0sis)
3. Install Magisk.
I'll try this around 9th or 10th.
Click to expand...
Click to collapse
OK I will give a Kali nethunter build soon without SuperSu in it. So there won't be any problem for you. Then you can use magisk which come pre rooted with RR ROM.
And update me that everything is working..

Help i am trying to use msfvenom command but it fails every time any solution?

[MODULE][SYSTEM MODE] [7.1.x] MicroG Project LineageOS 14.1

About
The linux-based open-source mobile operating system Android is not only the most popular mobile operating system in the world, it’s also on the way to becoming a proprietary operating system. How is that?
While the core operating system is still released as part of the Android Open Source Project, the majority of core apps are not. It gets worse: More and more libraries and APIs are only available on phones that run various Google apps pre-installed, effectively locking third-party apps to the Google ecosystem. For these reasons Android is described as being a “look but don’t touch” kind of open.
At this point, several popular open-source applications already require some of Google’s proprietary libraries to be installed. Increasing demand in the free software community in addition to severe problems in Google’s proprietary software discovered by the Android modding community, have led to the development of a free software clone of Google’s proprietary core libraries and applications - the microG Project was born.
Although most microG components are far from complete, users are amazed by the results. Free software users got extended application support, privacy-caring users can reduce or monitor data that is sent to Google and especially older phones can expect some battery life improvements. microG is not only used on real devices, but also replaces Google tools in test emulators and is even used in virtual mobile infrastructure.
Overview
microG GmsCore is a free and open implementation of the Google Play Services Framework. It allows applications calling proprietary Google APIs to run on AOSP-based ROMs like Replicant and LineageOS. Acting as a replacement for the closed-source Google Apps (GAPPS), it is a powerful tool to reclaim your privacy while enjoying Android core features.
Features
Opt-in to Google Services and extend application support
On-/Offline location service
Easy on battery, memory and CPU
No bloatware
Works on real devices, test emulators and virtual mobile infrastructure
Free and open source (Apache 2.0 licensed)
Summary
NanoMod can be installed as a Magisk Module or directly to /system, though a bit functionality is only available with Magisk.
NanoMod includes
microG and it's companions
on-device framework-patcher for microG support (signature spoofing)
on-pc framework-patcher for microG support (signature spoofing)
both patchers create the /system/.nanomod-patcher file after patching
F-Droid and it's privileged extension
modified Play Store to allow (in-)app-purchases with Magisk
alternatively Yalp Store can be installed instead
custom init scripts
pseudo-debloat feature (Magisk-only)
disables applications systemless-ly
pre-configured default settings
several Open Source applications
include replacements for the pseudo-debloated applications
full list of included applications
additional components
GNU Bash shell
GNU Nano terminal editor
several utilities from util-linux, bsdmainutils and more
The Legend of Zelda ringtones and sounds
Packages
Magisk Modules
Module packages, flashing through TWRP recommended, though flashing through Magisk Manager works aswell.
NanoMod: includes
everything mentioned in the Summary
NanoMod-microG: includes
microG and it's companions
GNU Bash
pseudo-debloat feature
app store
NanoMod-fdroid: includes
F-Droid and it's privileged extension
Extras
Extra packages, always flash through TWRP.
NanoMod-patcher: includes
on-device framework-patcher
creates the file /system/.nanomod-patcher after successful patching
optionally can patch user interface for it into Developer Settings
creates the file `/system/.nanomod-patcher` after successful patching
installs an addon.d script for automatic re-patching after ROM update
addon.d support files reside in `/data/nanomod-patcher/`
NanoMod-setupwizard: includes
AROMA bases Setup Wizard to create the configuration files
NOTE: AROMA only works on arm and arm64, if your device is x86 or x86_64, it won't work
NanoMod-uninstaller: includes
uninstalls all NanoMod Magisk Modules
uninstalls NanoMod installed in System Mode
uninstalls NanoMod configuration files
uninstalls NanoMod-Patcher addon.d environment
Scripts
Misc. Script for use from PC/Notebook, while device is in TWRP.
framework-patcher (clone the repository)
on-pc framework-patcher
creates the file /system/.nanomod-patcher after successful patching
invoke like framework-patcher [ver] [--gui]
where ver is your Android version (6.0, 7.1, ...)
where --gui is an optional switch to patch a global toggle for signature spoofing into Developer Settings
force-debloat (clone the repository)
system debloater
the list of applications resides in the script itself
needs to be run from TWRP, requires explicit user acceptance
mount-magisk (clone the repository)
script to mount or unmount Magisk in TWRP
script toggles mount-state (read: will mount Magisk if unmounted and unmount Magisk if mounted)​
**READ THIS FIRST BEFORE START FLASHING**
* Your device warranty is now void.
* We're not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed.
* Please do some research if you have any concerns about features included in this ROM.
* YOU are choosing to make these modifications not us.
* If you point the finger at us for messing up your device, we will laugh at you.
Installation Process
ROM to download : Lineage 14.1
Recovery to download : TWRP 3.1.1.
5 patch zip file need to download :
1 - NanoMod-14.4.20171014.zip
2 - NanoMod-fdroid-14.4.20171014.zip
3 - NanoMod-microG-14.4.20171014.zip
4 - NanoMod-setupwizard-14.4.20171014.zip
5 - NanoMod-uninstaller-14.4.20171014.zip
Installation Step
Ensure that you have TWRP version 3.1.1., If not flash this TWRP, link as above.
Remember that we are not using any gapps in this installation.
1 - Reboot into recovery
2 - Wipe Dalvik/ART Cache, Cache, System, Data and Internal Storage
3 - Reboot into recovery
4 - Install ROM - Lineage-14.1-20171013-UNOFFICIAL-WEEKLY-ja3gxx.zip"]LineageOS 14.1 [7.1.x]
5 - Reboot into system, done a setup during rom startup.
6 - Go to setting -about phone - click 7 times on "Build Number" to get developer option.
7 - Go to developer option and go to "Root Access" select "Apps Only"
8 - Reboot into recovery and flash zip file number 1 to 4, do not flash zip file number 5.
9 - Reboot into system. Setup and explore the rom installation.
Join us inside Telegram Group Discussion HERE​
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
XDA:DevDB Information
MicroG Project, ROM for the Samsung Galaxy S4
Contributors
antuketot76, kongacute , Alberto96, MadScript
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Lollipop Bootloader and Modem, TWRP 3.1.1 as Recovery
Based On: AOSP
Version Information
Status: Alpha
Current Stable Version: 14/10/2017 v1
Stable Release Date: 2017-10-14
Current Beta Version: 14/10/2017 v1
Beta Release Date: 2017-10-14
Created 2017-10-14
Last Updated 2017-11-10

Does this ROM have ja3gxx (GT-I9500) audio call bug (no sound at earpiece) which we see on whole LineageOS Roms ? (some says that it presents since cm11).

omeringen said:
Does this ROM have ja3gxx (GT-I9500) audio call bug (no sound at earpiece) which we see on whole LineageOS Roms ? (some says that it presents since cm11).
Click to expand...
Click to collapse
This rom are based on LineageOS same as alberto96 rom. The different this thread is Im patch some file for some functionality project on it. Actually this thread are not open for public yet due this project is still under development, so far runs very well. You will get very fast UI.
Will let you know when its done for user to test it.

bugs?

theleo2k said:
bugs?
Click to expand...
Click to collapse
Still under development, find out that battery draining fast.
Let us know on your result by flashing this.

[EOL][KERNEL] [G930F] Nethunter for LineageOS 15.1 ROM

End of Life Nethunter Kernel for Samsung Galaxy S7 (SM-G930F/FD) LineageOS 15.1 ​
Code:
I am not responsible for bricked devices.
If you going to flash it, you accepted it.
Of course your warranty is void.
This thread is only for herolte . If you have Edge go here
Nethunter Features:
BadUSB
HID gadget keyboard/mouse
DriveDroid
USB WiFi, mac80211 (Monitor mode, packet capture, packet injection) [Compatibility List]
Ethernet
F2FS
Bluetooth HCI USB support
RTL-SDR DVB support
Extra:
Boeffla wakelock blocker v1.10
Wireguard
Download:
Latest version G930F here.
Installation:
1. TWRP Backup your ROM
2. Flash G930F_Nethunter_LineageOS15.1_v*.img
3. Flash latest Magisk
4. Install busybox can be one from Magisk repository
5. Install Magisk Nethunter module from repository (This is easiest method but not perfect after it i recommend to update Nethunter.apk from this link)
6. Install kalifs-armhf-*.tar.xz by Nethunter manager
7. Extract Nethunter_Binaries.7z and binaries to folders:
Firmwares: system/etc/firmware and give permissions to every file rw-r--r--
hid-keyboard binary: system/xbin/ and give permissions to it rwxr-xr-x
8. Reboot
Now you have Nethunter on your LineageOS 15.1 ROM.
Extra:
In Utilities.7z are wifi testing tools binaries like aircrack-ng(Not needed for Nethunter only for test tools direct from android without Nethunter)
XDA:DevDB Information
[KERNEL] [G930F] Nethunter for LineageOS 15.1 ROM, Kernel for the Samsung Galaxy S7
Contributors
Svirusx
Source Code: https://github.com/Svirusx/Nethunter-s7-kernel-LineageOS15.1-16.0/tree/lineage-15.1
Kernel Special Features:
Version Information
Status: Testing
Created 2019-03-29
Last Updated 2019-03-29

CHANGELOG
2019-03-29 - v1.0
Initial release

Reserved

Any chance of building this kernel for Lineage 16?

ImSoBored said:
Any chance of building this kernel for Lineage 16?
Click to expand...
Click to collapse
Yes, now i'm testing Nethunter kernel for Lineage 16.0.

Extract Nethunter_Binaries.7z and binaries to folders:
Firmwares: system/etc/firmware and give permissions to every file rw-r--r--
hid-keyboard binary: system/xbin/ and give permissions to it rwxr-xr-x
can you explain more thanks you

[KERNEL] [G93xx] WirusMOD [Nethunter AiO] [End Of Life]

WirusMOD Nethunter Kernel for StockOreo, StockPie, StockQ, LineageOS 16.0 & 17.1, Treble [End Of Life]
Samsung Galaxy S7 / Edge ​
Code:
I am not responsible for bricked devices.
If you going to flash it, you accepted it.
Of course your warranty is void.
This thread is only for herolte . If you have Edge go here
Nethunter Features:
BadUSB
HID gadget keyboard/mouse (with possibility to temporarily disable)
DriveDroid
USB WiFi, mac80211 (Monitor mode, packet capture, packet injection) [Compatibility List]
support rtl88xxau USB WiFi
Ethernet
F2FS
Bluetooth HCI USB support
RTL-SDR DVB support
Extra:
Boeffla wakelock blocker v1.10
Wireguard
Download:
Latest version G93XF here.
Old download link G93XF here.
Installation:
1. TWRP Backup your ROM
2. Flash Nethunter Kernel
3. Flash latest Magisk
4. Install busybox can be one from Magisk repository
5. Install Nethunter Store
6. Install NetHunter apk, NetHunter Terminal, NetHunter KeX from Nethunter Store
7. In NetHunter apk go to Kali Chroot Manager and install chroot.
7. Extract Nethunter_Binaries.7z and binaries to folders:
Firmwares: system/etc/firmware and give permissions to every file rw-r--r--
hid-keyboard binary: system/xbin/ and give permissions to it rwxr-xr-x
8. Reboot
Loadable modules:
Modules_Nethunter_WirusMOD_vX.X.7z extract only modules for your version of kernel.
In every kernel folder are modules and firmware. You need only modules which you want to use.
For example if you don't want use tuners and dvb-frontends. Don't load modules from /modules/drivers/media tuners and dvb-frontends
In firmware are compiled firmwares for some of modules to use they you need to copy they to system/etc/firmware.
basic commands:
insmod 88XXau.ko - load module
rmmod 88XXau.ko - unload module
lsmod - list loaded modules
Some modules depend on another modules. If you want load rt2800usb.ko, you need first load rt2800lib.ko.
Another way to load modules is Module Loader
Copy modules to storage and choose modules which you want to load (load they more than 1 times, this apk load modules from up to down it don't look at dependence from modules)
Extra:
In Utilities.7z are wifi testing tools binaries like aircrack-ng(Not needed for Nethunter only for test tools direct from android without Nethunter)
DriveDroid without bugs made by disabling HID Patch:
To disable HID Patch: use this command in terminal: "echo Y > /sys/module/g_android/parameters/hid_disable"
Changing mode isn't instant after changing module status. Use DriveDroid (mount iso -> dismount) to active hid_disable.
To enable HID Patch: "echo N > /sys/module/g_android/parameters/hid_disable" and use DriveDroid like with disabling HID Patch.
HIDPatchSwitch this is simple script which can switch between HID enabled and disabled and show changed status.
If HID attacks / USB keyboard(.apk) don't work at Linux. After plugin, change USB mode to MIDI or USB-tethering.
Old Installation:
1. TWRP Backup your ROM
2. Flash Nethunter Kernel
3. Flash latest Magisk
4. Install busybox can be one from Magisk repository
5. Install Magisk Nethunter module from repository it have all apps which are needed to get fully working Nethunter (Another version of Nethunter apk link)
7. Extract Nethunter_Binaries.7z to folders:
Firmwares: system/etc/firmware and give permissions to every file rw-r--r--
hid-keyboard binary: system/xbin/ and give permissions to it rwxr-xr-x
8. Reboot
Screens:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Credits:
morogoku for his MoRoKernel source
ananjaser1211 for his USB modes fix with OneUI based ROMs
Nethunter creators for the best portable penetration testing tool.
XDA:DevDB Information
[KERNEL] [G93xx] WirusMOD [Nethunter AiO], Kernel for the Samsung Galaxy S7
Contributors
Svirusx
Source Code: https://github.com/Svirusx/Nethunter-s7-kernel-WirusMOD-AiO
Kernel Special Features: Powered by MoRoKernel
Version Information
Status: Stable
Created 2019-06-27
Last Updated 2021-08-10

2021.08.10 - v2.7
Upstream to MoRoKernel v8.8.1
2021.06.05 - v2.6
Upstream to MoRoKernel v8.8
2021.06.03 - v2.4
Temporary back to v2.4 due flashing problems
2021.05.30 - v2.5.1(Removed due flash problem)
Used build script from MoroKernel.
Upstream to MoRoKernel v8.7
2021.04.30 - v2.5(Removed due flash problem)
Upstream to MoRoKernel v8.7
2021.01.13 - v2.4
Upstream to MoRoKernel v8.6.1
2020.11.17 - v2.3
Upstream to MoRoKernel v8.5
2020.09.20 - v2.2
Added rtl8188eu driver
2020.08.04 - v2.1
Upstream to MoRoKernel v8.4
2020.05.09 - v2.0
Enabled Netfilter Target TTL
2020.04.18 - v1.9
Cleaned HID patch
Upstream to MoRoKernel v8.1
2020.04.08 - v1.8
More modules integrated in kernel.
Fixed samsung code.
Removed unnecessary debug and log modules from kernel.
2020.04.06 - v1.7
support rtl88xxau
loadable modules support (due to size of boot.img)
updated to latest morokernel source 8.0.1
2020.03.06 - v1.6
Pie OneUI ROMs USB modes fix
2019-12-06 - v1.5
Added DVB drivers.
2019-11-30 - v1.4
Update kernel source to MoRoKernel AIO v7.6.1
2019-11-06 - v1.3
Update kernel source to MoRoKernel AIO v7.5
2019-10-19 - v1.2
Update kernel source to MoRoKernel AIO v7.4
2019-09-25 - v1.1
Update kernel source to MoRoKernel AIO v7.2
2019-08-26 - v1.0
Initial AiO release

Reserved

Will this work for samsung s7 with viperos and android pie 9?

Destroyer55 said:
Will this work for samsung s7 with viperos and android pie 9?
Click to expand...
Click to collapse
This is only for Stock Ported ROM look at answer in WirusMOD Oreo ROM

Destroyer55 said:
Will this work for samsung s7 with viperos and android pie 9?
Click to expand...
Click to collapse
Read that title

Should you just flash it or do you have to do some steps before, like deleting data ?

Dav21t said:
Should you just flash it or do you have to do some steps before, like deleting data ?
Click to expand...
Click to collapse
This is only kernel. Normally you can flash it on your Note port ROM without data wipe but backup is alltime recommended.

NFE V4
Thank you Bro, I was waiting for it.
My question is : Is it working with NFE BD V4 ? and with an External adapter, I have a TP-Link WN722N

nawfalino said:
Thank you Bro, I was waiting for it.
My question is : Is it working with NFE BD V4 ? and with an External adapter, I have a TP-Link WN722N
Click to expand...
Click to collapse
This kernel is based on MoRoKernel. If MoRoKernel is compatible with NFE BD V4 than it too must work.
Compatibility depends at version of TP-Link WN722N do you have. You need test it.
Backup before flash is recommended.

Hey I'm having problems with usb HCI it does not work for me. Any solutions ?

Thanks for this!
Just wondering whether its possible to include kvm support for this kernel.

@Svirusx Wait what toolchain did you use to compile this? Whenever i try to compile it goes for about 20mins and then gets up to compiling net/built-in.o and then just stops. No errors or anything. All i changed was i enabled kvm support in the morokernel defconfig.

Jack_Rickwood said:
@Svirusx Wait what toolchain did you use to compile this? Whenever i try to compile it goes for about 20mins and then gets up to compiling net/built-in.o and then just stops. No errors or anything. All i changed was i enabled kvm support in the morokernel defconfig.
Click to expand...
Click to collapse
Hey, i use normal google android toolchains.
Are there any benefits to have kernel virtual machine support in this phone?
I have compiled kernel with kvm support for test, based on last lines of this source. Not tested only compiled, i don't know if all those modules are needed to run kvm.

@Svirusx Hey, thx so much! KVM can be used with limbo (https://github.com/limboemu/limbo/wiki/KVM), which could possibly allow for virtualization of windows 10 arm, linux, etc, and possibly other upcoming emulators that use virtualization, from within a vm on android.
---------- Post added at 04:12 AM ---------- Previous post was at 04:03 AM ----------
The way you can tell if it worked is by seeing if the directory /dev/kvm exists.

Jack_Rickwood said:
@Svirusx Hey, thx so much! KVM can be used with limbo (https://github.com/limboemu/limbo/wiki/KVM), which could possibly allow for virtualization of windows 10 arm, linux, etc, and possibly other upcoming emulators that use virtualization, from within a vm on android.
---------- Post added at 04:12 AM ---------- Previous post was at 04:03 AM ----------
The way you can tell if it worked is by seeing if the directory /dev/kvm exists.
Click to expand...
Click to collapse
Thanks for link with official instruction i going to try integrate it and test. If it going to be stable with S7 i push as release for next version of kernel.

Alright, thx

Svirusx said:
This kernel is based on MoRoKernel. If MoRoKernel is compatible with NFE BD V4 than it too must work.
Compatibility depends at version of TP-Link WN722N do you have. You need test it.
Backup before flash is recommended.
Click to expand...
Click to collapse
Will there be a new version based on Morokernel 7.0.1 ?
Thank you in advance !

What's the comparison betqeen he s7 exynos8890 and the a8 exynos7885 kernels ?
Is it possible to compile a kernel on my phone
Just a week ago I flashed everything for installing the fully updated to 9.0pie samsung galaxy s7 sm-G930w exynos8890.
Finally a working nethunter phone smoother than my worn out nexus 6p. which I could not get to update nethunter past android 7.1.
But I lost my phones and my s7 yesterday and now I am stuck with an exynos7885 samsung a8(2018) .
which is a ok phone considering it has an unlockable boot loader here in Canada where the s9s and s10s all switched to Qualcomm.
Anyway.
I am not much of a coder or an app developer but I am very good at finding exploits.
I want to try and take the kernel of my sm-a530w a8 and possibly patch the nethunter from another samsung exynos kernel perhaps the s7.
Is it possible or does anyone know of a solution for me. I don't have a computer anymore either.
I just want to build my own kernel but I have no clue how especially with no laptop at hand. Thanks
Sent from my Samsung Galaxy A8 (2018) using XDA Labs

Svirusx said:
This kernel is based on MoRoKernel. If MoRoKernel is compatible with NFE BD V4 than it too must work.
Compatibility depends at version of TP-Link WN722N do you have. You need test it.
Backup before flash is recommended.
Click to expand...
Click to collapse
New Moro pie release
MoRoKernel v7.1 (EDGE & FLAT)
https://www.androidfilehost.com/?fid=6006931924117939132
Can you help me install your kernel with F2F2 support ?
WIPE/ADVANCED WIPE/DATA
CHANGE FILE SYSTEM/F2FS
That enough ?

KekHunter-420 - A Pentesters Rom for J7Pro (j7y17lte)

KekHunter-420 1.1 for j7y17lte (Samsung Galaxy J7 2017 (Pro)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Your warranty is now void.
I am not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this ROM
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at me for messing up your device, I will laugh at you.
Read ME!
KekHunter-420 is intended to be used for legal security purposes only, and you should only use it to protect networks/hosts you own or have permission to test. Any other use is not the responsibility of the developer(s). *
Nethunter ROM based on ForkLineageOS by Team420 [hilledkinged , S133py , JochenSplifficus]
The feature list for KekHunter-1.0
Based on latest ForkLineageOS 17.1
Custom Team420 Nethunter and terminal apps included
Nhscripts in /bin for other terminals than nhterm
Modified bash 5.0
HID support
ctOS bootanimation
Added atheros and zd1211 firmware
Added GNU bin libraries (ncurses, intl, make)
Added F-Droid system priv extension app
Added DuckduckGo
Modified toybox
Device specific changelog:
https://github.com/samsungexynos7870 - A Huge Thanks and respect to @Astrako
https://github.com/samsungexynos7870/android_kernel_samsung_exynos7870 - @Astrako
Built with love
Big Thanks to all our testers!
Huge thanks to all the Devs who's work I used!
ForkLineageOS specific features
Face unlock (Not IR but camera)
Some more features then stock LOS (under display and System/statusbar and system/buttons)
System optimizations
Instructions
Attention! The bootloader needs to be unlocked!
0. Perform a backup of your current ROM. (optional)
Boot into your up to date TWRP/OrangeFox or what ever recovery you are using.
Flash Exynos7870_CreateVendor_2.0.zip - it must be done if you haven't done if before
Wipe system, data, vendor and caches
Flash the lineage-kek-17.1.0-j7y17lte.zip - that's all you will have to do (no need to flash any vendor)
Install GApps. (optional) [Recommended -> Open GApps (arm64) (10.0) Nano]
Install latest Magisk (!), wipe caches afterwards. (This is mandatory)
Reboot.
Grant Team420-Terminal and Team420-Nethunter Apps all permissions they are asking for.
Start up the Nethunter App, select chroot manager, and install your preferred kali chroot (minimal recommended). Make sure that your screen does not turn off during this process.
When the installation is complete (after ~3-20 minutes) start up the kali chroot.
Profit.
Troubleshooting
Can't open terminal?
Flash magisk - Any version of Magisk will work.
Open nhapp once and the terminal should open now.
Change the wallpaper
#Bugs
***VOLTE Network will never work.
Visit the Release Page in Github.
https://github.com/Team-420/KekHunter-420/releases/tag/j7y17lte
XDA:DevDB Information
KekHunter-420, ROM for the Samsung Galaxy J7 (2017)
Contributors
Thiviyan
Source Code: https://github.com/samsungexynos7870
ROM OS Version: Android 10
ROM Kernel: Linux 3.1.x
Based On: LineageOS
Version Information
Status: Stable
Current Stable Version: 1.0
Stable Release Date: 2020-10-23
Created 2020-10-23
Last Updated 2020-10-23

Reserved

Reserved

Good work Good Job my friend
Testing ....

hacker812c said:
Good work Good Job my friend
Testing ....
Click to expand...
Click to collapse
Thanks dude. Let me know how you like it.

Thiviyan said:
KekHunter-420 1.1 for j7y17lte (Samsung Galaxy J7 2017 (Pro)
Your warranty is now void.
I am not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this ROM
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at me for messing up your device, I will laugh at you.
Read ME!
KekHunter-420 is intended to be used for legal security purposes only, and you should only use it to protect networks/hosts you own or have permission to test. Any other use is not the responsibility of the developer(s). *
Nethunter ROM based on ForkLineageOS by Team420 [hilledkinged , S133py , JochenSplifficus]
The feature list for KekHunter-1.0
Based on latest ForkLineageOS 17.1
Custom Team420 Nethunter and terminal apps included
Nhscripts in /bin for other terminals than nhterm
Modified bash 5.0
HID support
ctOS bootanimation
Added atheros and zd1211 firmware
Added GNU bin libraries (ncurses, intl, make)
Added F-Droid system priv extension app
Added DuckduckGo
Modified toybox
Device specific changelog:
https://github.com/samsungexynos7870 - A Huge Thanks and respect to @Astrako
https://github.com/samsungexynos7870/android_kernel_samsung_exynos7870 - @Astrako
Built with love
Big Thanks to all our testers!
Huge thanks to all the Devs who's work I used!
ForkLineageOS specific features
Face unlock (Not IR but camera)
Some more features then stock LOS (under display and System/statusbar and system/buttons)
System optimizations
Instructions
Attention! The bootloader needs to be unlocked!
0. Perform a backup of your current ROM. (optional)
Boot into your up to date TWRP/OrangeFox or what ever recovery you are using.
Flash Exynos7870_CreateVendor_2.0.zip - it must be done if you haven't done if before
Wipe system, data, vendor and caches
Flash the lineage-kek-17.1.0-j7y17lte.zip - that's all you will have to do (no need to flash any vendor)
Install GApps. (optional) [Recommended -> Open GApps (arm64) (10.0) Nano]
Install latest Magisk (!), wipe caches afterwards. (This is mandatory)
Reboot.
Grant Team420-Terminal and Team420-Nethunter Apps all permissions they are asking for.
Start up the Nethunter App, select chroot manager, and install your preferred kali chroot (minimal recommended). Make sure that your screen does not turn off during this process.
When the installation is complete (after ~3-20 minutes) start up the kali chroot.
Profit.
Troubleshooting
Can't open terminal?
Flash magisk - Any version of Magisk will work.
Open nhapp once and the terminal should open now.
Change the wallpaper
#Bugs
***VOLTE Network will never work.
Visit the Release Page in Github.
https://github.com/Team-420/KekHunter-420/releases/tag/j7y17lte
XDA:DevDB Information
KekHunter-420, ROM for the Samsung Galaxy J7 (2017)
Contributors
Thiviyan
Source Code: https://github.com/samsungexynos7870
ROM OS Version: Android 10
ROM Kernel: Linux 3.1.x
Based On: LineageOS
Version Information
Status: Stable
Current Stable Version: 1.0
Stable Release Date: 2020-10-23
Created 2020-10-23
Last Updated 2020-10-23
Click to expand...
Click to collapse
Hi . tanku for make this ROM
Sound play and music too low
Plz given me a sound booster mod for this rom
---------- Post added at 09:10 AM ---------- Previous post was at 09:03 AM ----------
I'm tasting this ROM
All is good
But a bug in sharing battery (when phone is off not showing animation and do not power on . just stay in charge screen , need force restart white 3 key)
Magisk his don't work on this ROM
Game player is good
Face unlock is OK
Front flash don't work
Calling spker low
Music SPK low
Soory for bad EN

Captain2AR said:
Hi . tanku for make this ROM
Sound play and music too low
Plz given me a sound booster mod for this rom
---------- Post added at 09:10 AM ---------- Previous post was at 09:03 AM ----------
I'm tasting this ROM
All is good
But a bug in sharing battery (when phone is off not showing animation and do not power on . just stay in charge screen , need force restart white 3 key)
Magisk his don't work on this ROM
Game player is good
Face unlock is OK
Front flash don't work
Calling spker low
Music SPK low
Soory for bad EN
Click to expand...
Click to collapse
magisk works. i used the regular magisk and it worked. if you meant Magisk Hide. you should to the props trick in android terminal.
other bugs are known bugs in exynos 7870 treble roms.

Thanks my friend
If possible compile Kernel Android 11
I suggest AOSP Extended mod Q
no developer has been working on updating and there is no project for this ROM in the Gsi developer area on xda. there are device-specific roms but there is no Android 10 GSI unofficial