Develop Bugs

[MOD] LG G2 - Lollipop Volume Booster - Best Audio Output/Settings

Updated for Lollipop Version :laugh:
increase your Headphone & Volume Output
Flash the Boosted file, if you want to revert flash the Stock file.
Note: This Mod only works for Lollipop Versions.
Download : https://drive.google.com/folderview...5mVVNUcUJwN0pTMEJxaXVJODJLUmI2NjI3bzVjbkJIM0U
----------------------------------------------------------------------------------------------------------------------------------
(Kitkat Versions)
Working with G3 Ported ROM's
This Mod Produce a Better Quality Sound like a Apple Device
Features: Loud Music - More Bass - Pure Clarity
Special Thanks & Credits to @iXNyNe @Henryy97 @zhuhang
Try on your own risk, im not responsible if you brick your device
Must be Stock KitKat ROM - Rooted & installed TWRP 2.7
Step 1 - Brings Volume Loudness
Step 2,3 - Quality Music Output
Step 1: Download and Flash any one zip file (preferred) listed below and Reboot.
link: http://d-h.st/users/NyNe/?fld_id=34873
1. lgg2-speaker1.3-65-signed.zip - Speaker & Headphone Boost (High)
2. lgg2-headphone1.3-6520-signed.zip - Only Headphone Boost (High)
3. lgg2-headphone1.3-6218-signed.zip - Only Headphone Boost (Medium)
Step 2: Download Viper4Android - FX version v2.3.3.0
link: http://vipersaudio.com/blog/?page_id=48
File downloaded from Step 2 Zip file has two files,Extract and place the 5.3 mb (4.x_2330) file on your SD Card and install the apk.
After installing it open Viper4Android and follow instructions, select Super Audio Quality and install the Driver if it says LPA is enabled do you wish to disable. just press Yes and now Reboot.
Step 3: Settings on Viper4Android are Very important for Best Enhanced Output.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Step 4: After all the above process Reboot your Device and its Time to Plugin Your Headset :laugh:
Tested:
ON: Cloudy Pro II 1.2 - Cloudy Stock 1.3 - LG Stock Kitkat ROMs
With: Apple Earpods / Sony MDR-XB30EX / Sony MDR-XB400
1. This MOD is particularly Based on Headset settings, you can try with Speaker settings too but DO NOT enable EXTRALOUD at bottom of the Speaker settings.
2. Works with Stock Music Player, but Awesome :victory: with Player Pro (my opinion)
3. Do not enable Music Equalizer (try changing in Viper4Android - Select Preset)
if you want to revert to Stock Settings: Refer to page 12 - #118
Hit Thanks if these changes bring a better Audio in your G2

Hey thanks for the mod and glad to be of help to you. One question, I realized viper4android let's you choose sound quality settings. does it significantly affect battery life if I pitch the best?

mod not work with headset bluetooth. the sound is out with speaker when the headset is pair with phone

Henryy97 said:
Hey thanks for the mod and glad to be of help to you. One question, I realized viper4android let's you choose sound quality settings. does it significantly affect battery life if I pitch the best?
Click to expand...
Click to collapse
i was using this MOD since 5 days and i dont notice any Battery Drain. especially with Viper4Android. Battery remains the same as KItKat Stock

Choice...
The mod you posted works with a rooted phone. I have used your mod in the past and noticed a significant improvement in sound. Later I have been using non-rooted phone and was unable to get the Viper4droid function.
The choice I have made is to use Jetaudio with AM3D activated... It is not the best but provides better base and tones. The good thing is you can modulate both jet audio settings and AM3D and this helped in improving the output too...
Posted this, just to ensure that someone like me could try it .....

deleted...

Thanks for this, I've installed without a problem! I have just a question:
SandyKick said:
... if it says LPA is enabled do you wish to disable. just press Yes and now Reboot.
Click to expand...
Click to collapse
What's better, LPA enabled or not?
Thanks

TheMorpheus said:
Thanks for this, I've installed without a problem! I have just a question:
What's better, LPA enabled or not?
Thanks
Click to expand...
Click to collapse
to my knowledge LPA disabled has got better results disabling changes the following values
Ipa.decode=true to lpa.decode=false
tunnel.decode=true to tunnel.decode=false
lpa.use-stagefright=true to lpa.use-stagefright=false
thanks for liking my MOD

hardykalyan said:
The mod you posted works with a rooted phone. I have used your mod in the past and noticed a significant improvement in sound. Later I have been using non-rooted phone and was unable to get the Viper4droid function.
The choice I have made is to use Jetaudio with AM3D activated... It is not the best but provides better base and tones. The good thing is you can modulate both jet audio settings and AM3D and this helped in improving the output too...
Posted this, just to ensure that someone like me could try it .....
Click to expand...
Click to collapse
Viper4Android should have root access, so according to you which one you found better ?
this mod or Jetaudio with AM3D activated ??

@down
Yup Yup xD

drakexpl said:
Step 3 is silly and funny. Every headphones are different. V4A thread is already here so what's the point of creating another
Wysłane z mojego LG-D802 przy użyciu Tapatalka
Click to expand...
Click to collapse
Some ppl think its silly, but still people are confused what settings to be used. be fair man, helping and being clear is not bad ri8 ?
better you notice step 1. you cant find that in Viper4Android...this is a combination of two good mods.

SandyKick said:
to my knowledge LPA disabled has got better results disabling changes the following values
Ipa.decode=true to lpa.decode=false
tunnel.decode=true to tunnel.decode=false
lpa.use-stagefright=true to lpa.use-stagefright=false
thanks for liking my MOD
Click to expand...
Click to collapse
How do you revert back after the first sound mod? How do you revert LPA back after disabling? Have you noticed any difference in battery life? LPA is supposed to really increase battery life, so I'm reluctant to disable or change anything without the option to revert back, I know you can take a nandroid but that's time consuming, are there easier ways? Thanks!

Keep in mind the step 1 zip you are using is only for cloudy ROM.
While it may work with other firmware it is actually overwriting the intended settings provided by the firmware. For example CyanogenMod and omni have wildly different values in mixer_paths.xml than the one you provided.
If you want a zip that will do pretty much the same thing as step 1 see my thread http://forum.xda-developers.com/showthread.php?t=2701745

Seems that there is a little bit background noise after ViPER Clarity is enabled and set to 10.0dB ?
It's quite serious actually.
BTW, what is the purpose of changing the values of mixer_paths.xml? ( just curious to know @@ )

kevintong116 said:
Seems that there is a little bit background noise after ViPER Clarity is enabled and set to 10.0dB ?
It's quite serious actually.
BTW, what is the purpose of changing the values of mixer_paths.xml? ( just curious to know @@ )
Click to expand...
Click to collapse
The values changed in the mixer_paths.xml mod I posted are specifically to boost the volume output of the headphones and prevent a volume level change when switching between music and phone call etc.
There are other things that can be done using mixer_paths.xml like the bass reducer for the speaker which solves some distortion issues. You can also adjust the speaker volume, the call volume, and many other things.
I'm not 100% sure the of what changes the cloudy zip from the op makes. It's a premade firmware specific file, and probably shouldn't be flashed on a firmware that isn't cloudy. But I can tell you that the mod I posted actually gives you louder sound output then the cloudy one, and it's universal to all KitKat firmware.
Sent from my LG-D800 using Tapatalk

iXNyNe said:
The values changed in the mixer_paths.xml mod I posted are specifically to boost the volume output of the headphones and prevent a volume level change when switching between music and phone call etc.
There are other things that can be done using mixer_paths.xml like the bass reducer for the speaker which solves some distortion issues. You can also adjust the speaker volume, the call volume, and many other things.
I'm not 100% sure the of what changes the cloudy zip from the op makes. It's a premade firmware specific file, and probably shouldn't be flashed on a firmware that isn't cloudy. But I can tell you that the mod I posted actually gives you louder sound output then the cloudy one, and it's universal to all KitKat firmware.
Sent from my LG-D800 using Tapatalk
Click to expand...
Click to collapse
How about the noise? Is that normal?

kevintong116 said:
How about the noise? Is that normal?
Click to expand...
Click to collapse
Couldn't tell you. I'm not using viper, and I'm on CyanogenMod.
I recommend you try to clean flash your firmware (which will undo the mixer mod) and then try the mixer mod from my thread without viper and see how it sounds. If you need the viper mod after that you can add it, but at least you won't be using the wrong mixer file (my mod just changes YOUR mixer file rather than replacing it)
Sent from my LG-D800 using Tapatalk

Noozxoid EIZO-rewire is much better than Viper. IMHO

Why is it that when I extracted the mixer_paths.xml file from the zip and replaced it with my original mixer_paths.xml i got bootloop?

Henryy97 said:
Why is it that when I extracted the mixer_paths.xml file from the zip and replaced it with my original mixer_paths.xml i got bootloop?
Click to expand...
Click to collapse
Probably not meant for your firmware. Please read my other posts on page 2 of this thread.
Sent from my LG-D800 using Tapatalk

[SoundMod] (6.0+) Hana Audio Engine For Xperia M

Hana Audio Engine
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
For Xperia M​Dream, Imagine & Feel What You Can't Hear It Here...​
Hi everyone, i want to share my first soundmod for Xperia M device . First of all give thanks to @PDesire for source sound file and another sound developer . And with this soundmod i will introduce wonderful sound quality with stabilize, clear voice and include optimization for low freq channel (LFE). For now this soundmod work with all custom ROM for Xperia M That based on 6.0+.
This soundmod feature ;
- Qualcomm Audio Effects
- Sony Audio Effects
- Beats Audio with Harman Kardon
- Dolby DAX Audio
- SRS
- Alsa Resampler with 48KHz (96Khz for Experimental)
- SoundAlive Audio
- DTS Eagle
- BBESonicMax
- MaxxAudio and still many more inside
How to install :
- Remove all soundmod that already installed on your system before install my mod
- Download Hana Audio Engine and go to recovery, after that flash this zip
- And try to hear the different from Hana Audio Engine
After installing this soundmod, you can try to play some song to test. Not need to access soundenhancement again, but if you want it you still can access it .
How to access sony soundenhancement
- Go to settings and select apps and click 3 dot buttons
- Choose show system and search audioFX (or maybe you can try to disable this app)
- Search Open by default and choose Clear Defaults option.
- After that you can try to set it with cm music app, and go to equalizer settings with 3 dot buttons and select sony soundenhancement .
How to access Snapdragon Audio+ for video :
- Go to stock gallery app and try to play some video
- Plug in your headset to your phone and try to click 3 dot buttons
- Choose Audio Effects and and you can configure Snapdragon Audio+ in this part
(NOTE: try to disable this effects after you play video, because this will wake conflicts with Hana Audio)
For uninstallation this mod :
- Wipe your system and re-flash back your system with any additional zip in recovery mode
(if you have it and my mod will completely uninstalled)
I'm not make any uninstaller for this mod
Recommended Audio Player :
- Poweramp Audio Player
(For advanced audio configuration)
Or any audio player that you like it
Have Try :laugh:.
- Additional Explanation
How to switch audio engine
How to switch audio frequency and audio channel
This is for Download Link
Android File Host
https://www.androidfilehost.com/?fid=673368273298929695

Nicklas Van Dam said:
Dream, Imagine & Feel What You Can't Hear It Here...
Click to expand...
Click to collapse
Congratulations my friend and good luck with your new mod. [emoji122] [emoji106]

kh34d said:
Congratulations my friend and good luck with your new mod. [emoji122] [emoji106]
Click to expand...
Click to collapse
Your welcome my friend .

Nicklas Van Dam said:
Hana Audio Engine
For Xperia M
How to install :
- Remove all soundmod that already installed on your system before install my mod
Click to expand...
Click to collapse
Nice work ! I installed you mod but when I try to access it I am not able to access it, only audio fx is opening! How to remove audiofx and get ur mod !?
And also if you provide steps to uninstall this mod, it will helpful for people who wants to try some other Mods

FakrudeenAhamed said:
Nice work ! I installed you mod but when I try to access it I am not able to access it, only audio fx is opening! How to remove audiofx and get ur mod !?
And also if you provide steps to uninstall this mod, it will helpful for people who wants to try some other Mods
Click to expand...
Click to collapse
to select sony soundenhancement, go to settings and select apps and click 3 dot buttons and choose show system. After that search audioFX and search Open by default, after that choose Clear Defaults option.
And you can try to set it with cm music app, and go to equalizer settings with 3 dot buttons and select sony soundenhancement .
And for uninstallation i'm not make any uninstaller for this mod, just wipe your system and re-flash back your system with any additional zip if you have it and my mod will completely uninstalled .
Thanks for your suggestion

>.>
hope you took help from viper4arise devs....?
they make awesome mods

Thanks for keeping nicki mods alive

Adarsh Dubey said:
Thanks for keeping nicki mods alive
Click to expand...
Click to collapse
You're welcome , I'm still working on this mod and already solve some problem. But maybe this update will delay until my laptop is back from service center.
Sorry :crying:
Sent from my Sony Xperia M using XDA Labs

New update is released !
New Update is already released with new audio enhancement and new 96Khz audio freq (Experimental).
In this update i'm still enable DSEE-HX feature to make sound quality is good, but this make we can't use Sony Music app.
If someone want to use Sony Music App, then try to use root explorer and go to /system and choose file build.prop.
hold up for a second until new option is pop up, choose open in text editor and find this string.
"ro.somc.dseehx.supported=true" and change it too "ro.somc.dseehx.supported=false"
save and reboot your phone, then we can use Sony Music app again.
In this update i'm re-new sound engine and include 2 new engine , that you can switch it in terminal.
1. Hana Illusion Audio Enhancement (Stock Audio Effects) [AIE]
This audio engine will give you a sound quality with great balance for rock and pop music, include low background effects and great bass sound.
2. Hana Illusion Bass Audio Enhancement [AIBE]
This audio engine based on Hana Illusion, but this is not included low background effects, but have clear voice with great bass sound. This audio engine only support for rock music.
3. Hana Bass Audio Enhancement [HBAE]
This audio engine is based from old engine that have powerful bass and little background effects, my little brother design this effect. This audio engine only for rock and some pop music.
How to switch audio engine
- Download or install terminal emulator app from Playstore
- and type this command
su
cd /system/Hana-audio
sh hana.sh
- you can choose what audio engine that you'll switch it
- and reboot after it
Download available in OP Thread

Other configuration
How to change to 96Khz :
- Download or install terminal emulator app from Playstore
- and type this command
su
cd /system/Hana-audio
sh freq.sh
- you can choose what freq that you'll switch it
- and reboot after it
[NOTE : switch to 96Khz will give higher sound quality, but this will need a lot of cpu process too during sound processing.]
How to enable or disable 6 Audio Channel :
- Download or install terminal emulator app from Playstore
- and type this command
su
cd /system/Hana-audio
sh LFE.sh
- you can choose what channel that you'll switch it
- and reboot after it
[NOTE: Stock already enabled 6 [LFE] channel, if you try to disable it then channel will switch to 3 [LFE] channel.

Disortion
Sound is a little bit disorted on max volume, still great job

Karinica said:
Sound is a little bit disorted on max volume, still great job
Click to expand...
Click to collapse
You're welcome bro , I'll try to look at that problem when I'm finish with my kernel

Will it work on latest Resurrection remix 5.8.2??

nicki sound mod, thanks for that. We need it.

Link update google disk please
Link update google disk please

[MOD] [APP] [ROOT] [AUDIO] Viper4android Audio Mod For Louder Clearer Sound

Viper4android Audio Mod For Louder Clearer Sound ​
Here is my guide on how to install Viper4android on your Moto g5 for Nougat Roms Only!
For Oreo Roms install Viper4android via the magisk manager download module section
Screenshots
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Requirements
A rooted Moto g5 phone - I have tested this on Lineageos but I will assume it will work on a rooted stock rom too
Arise Sound System Thread
Arise Sound System Download
Instructions
Download the Arise Sound System
Flash it in TWRP
Aroma installer will start
Follow the Instructions of the Installer
SELinux Must be set to permissive - either use the installer to permanently set this to permissive or you can manually set it to permissive from within the Viper4android app
You only need to install Viper4android - However you are free to install any sound mods you like but I have not tested them
Next you need to disable any equaliser apps you currently have running
In lineageos turn off AudioFX from within the app
Make sure you disable any equalisers that are part of the music app you use as some 3rd party apps come with them so look in the apps settings and switch it off
Swipe right and select settings
Enable developer mode
Select Disable SELinux
Select ok
Note if you restart your phone you will have to set SELinux to permissive again for it to work unless you have set it to be permanently permissive
Open your audio player app settings and goto the equaliser section
See if there is an option to change from the apps equaliser to system equaliser
Eg for pi music player
Go to the app settings and change use pi equaliser to system equaliser
You will know its working if you open up Viper4android app
Swipe right
Select driver status
If the following shows it's working
NEON Enabled: Yes
Enabled: Yes
Status: Normal
Audio Format: Supported
Processing: Yes (when music is playing) No (When nothing is playing or not set for system equaliser or AudioFX is on)
Feel free to play around with the settings of Viper4android - after all everyone's headphones are different
Credits
Viper4android
zhuhang
ViPER520
A.R.I.S.E. Sound Systems
Official Viper4android thread
https://forum.xda-developers.com/showthread.php?t=2191223

TheFixItMan said:
Viper4android Audio Mod For Louder Clearer Sound ​
............................... Mod Edit: Removed bulk of OP quote ......................................
Official Viper4android thread
https://forum.xda-developers.com/showthread.php?t=2191223
Click to expand...
Click to collapse
Hello FixItMan,
earlier we exchanged in another thread on sound volume. Does this implementation give a sustainable implementation for increasing sound volume v.v. the program editing you suggested before? I certainly want to try and thanks already for input and work on this subject.

hly17_7 said:
Hello FixItMan,
earlier we exchanged in another thread on sound volume. Does this implementation give a sustainable implementation for increasing sound volume v.v. the program editing you suggested before? I certainly want to try and thanks already for input and work on this subject.
Click to expand...
Click to collapse
I didn't try the other app
Yes this improves the volume and is sustainable (albeit you may have have to disable SELinux again after restart)
Use the playback gain control to increase volume further than what I have in the provided profile
Gives total control over audio like bass frequency reverb stereo surround etc see screenshot for the app in first post

Hi bro, thanks for your great job. I try to install Viper but didn't work. After rebooting the device there is a constant popup for install the drivers! Can u help me? I'm not a noob

theflanker said:
Hi bro, thanks for your great job. I try to install Viper but didn't work. After rebooting the device there is a constant popup for install the drivers! Can u help me? I'm not a noobp
Click to expand...
Click to collapse
You need to copy the lib file to system/lib and set the correct permissions for the file as per instructions
Failure to do this correctly will result in that message
Edit
See screen shot section for how permissions of lib file should look

OK I will try it. Thanks :good:
Edit: nop nothing work:crying: The attached picture comes from a different root explorer, but the values are identical .

theflanker said:
Hi bro, thanks for your great job. I try to install Viper but didn't work. After rebooting the device there is a constant popup for install the drivers! Can u help me? I'm not a noob
Click to expand...
Click to collapse
Try this fix for nougat on stock it worked for me and fellow as instructed by OP above
https://forum.xda-developers.com/showpost.php?p=68702684&postcount=23760
---------- Post added at 10:38 AM ---------- Previous post was at 10:30 AM ----------
Cheers Fixitman ,it worked a treat after installing the nougat fix apk. Now the loud speaker is louder as it supposed to be.
Thanks man.

rophaq said:
Try this fix for nougat on stock it worked for me and fellow as instructed by OP above
https://forum.xda-developers.com/showpost.php?p=68702684&postcount=23760
Click to expand...
Click to collapse
Ok I will try all the solutions and report the results
thanks for help me

theflanker said:
OK I will try it. Thanks :good:
Edit: nop nothing work:crying: The attached picture comes from a different root explorer, but the values are identical .
Click to expand...
Click to collapse
Try copying it and setting permissions with total commander
Iv found with some other root browsers the settings don't stick as the app doesn't have the ability to mount the folder r/W or you didn't mount the lib folder r/w
Total commander mounts it for you and prompts you to remount the folder

Sorry missed out a step
To find the disable selinux setting
Open viper4android app
Swipe right
Select settings
Select enable developer mode
Now disable selinux will show
Iv added this step to first post in case you were wondering where that option is
Failure to disable selinux means audio driver will have status abnormal

Yeeeeee V4A now finally work... Thanks a lots guys. But... I used it on my Xperia Z2 and the effects it's very different! That's better than nothing
Sent from my Moto G (5) using XDA-Developers Legacy app

This must working with poweramp? because i do not see any change with or without, i disabled audio effects, but still nothing. Thanks

?
woozie.2007 said:
This must working with poweramp? because i do not see any change with or without, i disabled audio effects, but still nothing. Thanks
Click to expand...
Click to collapse
Yes it works with poweramp
Go into poweramp settings
Select audio
Advance tweaks
Disable direct volume control
This then turns off poweramps equaliser and let's the system take over
All apps settings in different music player will be different but all have the same premises - you're aiming to turn off the apps equaliser (just turning off isn't good enough as the app is still in control) and giving access back to the system
Here's a screenshot of that settings menu in poweramp

i disabled direct volume and eq, but no effects, the viper4android say no at processed and i tried to complet eliminate audio effects and no result

woozie.2007 said:
i disabled direct volume and eq, but no effects, the viper4android say no at processed and i tried to complet eliminate audio effects and no result
Click to expand...
Click to collapse
it works - i just tested it
also make sure in the poweramp equalizer screen select tone and volume (has dials for mono stereo x volume)
unselect equ tone and limit
also make sure if running for example lineageos that you have also turned off audiofx from the audiofx app
make sure you have disabled selinux

i have all of this modifications, but i am on stock rom rooted, i have selinux disabled, not works

woozie.2007 said:
i have all of this modifications, but i am on stock rom rooted, i have selinux disabled, not works
Click to expand...
Click to collapse
iv not tested it on stock rom
All I can say is - iv just tested it on my moto g5 running lineage os and it works
Try pi music player instead using the guide on the first post and see if that works - if it does theres a setting somewhere you are missing in poweramp or you have another equaliser that needs to be switched off - maybe a stock dsp equaliser - have a look in the phones settings menu under audio and see if it has the option to select a dsp/equaliser - if it does select it and select viper4android as your dsp/equaliser

i am wondering if works only with music player or all sounds in the phone, like ringing, call auditions...
i didnt have any equ, only audio effects which is disabled now

woozie.2007 said:
i am wondering if works only with music player or all sounds in the phone, like ringing, call auditions...
Click to expand...
Click to collapse
it works with all sounds - as long as the phones settings are set to use viper4android as its dsp/equaliser
The only problem you might experience is sometimes it takes 1 or 2secs for the effects to kick in for the first time - there for if you get a notification for the first time the start of that notification may sound low volume and suddenly rise up to the level its meant to be
This should only happen the first time the driver kicks in

thanks for your time, but i tried everything, i read first post for 20 times, i folowed all, still nothing, not works, i dont know what can i try

iBasso DX160 Portable Music Player - 5" HD+ | 1080×1920 | 13 hours of continuous play

iBasso DX160 Portable Music Player - 5" HD+ | 1080×1920 | 13 hours of continuous play
iBasso DX160 Portable Music Player with 1080P Full Screen ​
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Main Features​
*5-inch HD+ display with 1080×1920 pixels resolution and 445 PPI
* Android 8.1 Oreo
*Dual CS43198 chipset which is capable of DSD over PCM (DSD DoP) up to DSD256 and PCM 32/384kHz.
*125dB SNR for single-ended headphone while for the balanced headphone the SNR ranges to 130dB
*2GB LPDDDR3 RAM and 32GB Internal Storage.
*dimensions 113 x 69 x 15mm and weighs 178g.
*200 mAh battery supporting Quick Charge 3.0 support.
*13 hours of continuous playback upon the single full charge.
Click to expand...
Click to collapse
Official Page: iBasso DX160 ​
Stay tuned for more news and information.​

2gb ram for an Android device?

Twitch007 said:
2gb ram for an Android device?
Click to expand...
Click to collapse
Yes, its Android "experience" is not as fast, AnTuTu 3D benchmark scores on par with DX200/DX220 (it's a Rockchip SOC after all), though Mango app GUI is very responsive. But the sound is something else!!!

vectron said:
Yes, its Android "experience" is not as fast, AnTuTu 3D benchmark scores on par with DX200/DX220 (it's a Rockchip SOC after all), though Mango app GUI is very responsive. But the sound is something else!!!
Click to expand...
Click to collapse
I guess this thing is more head-fi than xda.

Twitch007 said:
I guess this thing is more head-fi than xda.
Click to expand...
Click to collapse
When it comes to sound, yes. But then, Lurker always cooks a fw fix for iBasso to optimize OS and to add Google Play store, and that is pure xda

Please I need help.
I have installed lurkers firmware, installed magisk, got root access , installed solid explorer, installed busy box, installed selinux permissive then i have installed audio modification library plus audio compatibility patch and after all that viper4android and James dsp. I think I did everything right. My problem is that when I activate the sound mods sound comes out distorted, noise, scratchy.
The drivers are installed properly and processes properly. I think I basso has modified system audio path for bit perfect and thats why all this problem.
Or I don't know why. Can someone help me or knows anyone how can I fix it. Thx

Can someone please help me flash magisk and obtain root so that i could use some magisk modules.
Is it safe to flash the magisk zip file using recovery?
Thanks in advance.

Yes of course. Download lurkers firmware
https://github.com/Lurker00/DX160-Firmware-Add-on , and magisk is already pre installed, after installing lurkers firmware you need only to download magisk manager apk and that's it.

Pumped. said:
Yes of course. Download lurkers firmware
https://github.com/Lurker00/DX160-Firmware-Add-on , and magisk is already pre installed, after installing lurkers firmware you need only to download magisk manager apk and that's it.
Click to expand...
Click to collapse
I was hoping for a way without lurker's add-on... can flashing the magisk zip from the recovery of the DX160 work?

Yes and no. via adb fastboot or adb sideload it doesn't let's you Flash magisk or any other costume recovery. You need to disable verity, remount system, unlock the device and then yes I believe you can flash everything you want. Or use the RKdevtool or android tool to flash or patch system. I'm not sure. Lurkers firmware is the easiest way to root the device. If after installing lurkers firmware and installing magisk manager apk does not lets you install modules then you need to Download exactly the same stock firmware you already have installed in your device , extract stock firmware on Pc then select boot.img and copy boot.img into device internal storage.
After that you need to open magisk, type update, select and patch file , then choose the stock boot.img you saved in your device type and then reboot your device. After this process you will be able to install all magisk modules without issues and it will work perfectly.
Do not update and flash magisk_patched.img. It will cause problems - bootloop, etc.
If want to try some commands and try to flash
Then turn on the player anable usb debugging, OEM unlocking then will pop a window on the top and must select transfer files or transfer photos.
After that don't turn your player off. Open command window and type or try some commands
Examples :
adb devices
adb root
adb remount
adb shell mount -o rw,remount /system
adb shell mount -o rw,remount rootfs /
adb push your path/your file.img /data
adb install -r your path/your file.apk
adb shell 0<supersu.cmds for example
adb reboot.
Etc.
Trying unlocking device
I tried this commands but without positive results
adb devices
fastboot devices
fastboot flashing unlock
fastboot oem unlock
fastboot oem unlock_accept
fastboot getvar unlocked
Fastboot reboot
If you want to try more commands and experiment
then visit
http://opensource.rock-chips.com/wiki_Fastboot
This was one way to remount system, push and install
But the player must be on and select transfer files on top of player.
Other solution is to use RKdevtool or android tool.
If you need the disable verity folder and make it easier for you then go and download it Form fidelizer ibasso dx160 website.
I will not be able to try and make viper4android or James dsp work because I will sell this player. I don't like anymore ibasso players.
I will work on the fiio m11.

Best player ever!

Pumped. said:
Please I need help.
I have installed lurkers firmware, installed magisk, got root access , installed solid explorer, installed busy box, installed selinux permissive then i have installed audio modification library plus audio compatibility patch and after all that viper4android and James dsp. I think I did everything right. My problem is that when I activate the sound mods sound comes out distorted, noise, scratchy.
The drivers are installed properly and processes properly. I think I basso has modified system audio path for bit perfect and thats why all this problem.
Or I don't know why. Can someone help me or knows anyone how can I fix it. Thx
Click to expand...
Click to collapse
Did you made viper4android works for dx160? Is equalizer working? I want to try but dont know how to start, manual rooting or with lurkes firmwire. Any one have viper4android on dx160?

ViPER4Android, JamesDSP and Dolby Digital Plus.
I see a few of you mentioning these types of DSPs. I myself have just gotten this device, and because im using it as a streaming bluetooth device (DSP is important) i was about to send it back as these werent apparently going to be simple to implement. Though... after some persistence i have a result that works well with Lurkers fiirmware mod.
Flashing the following Magisk module will indeed give you working V4a/JamesDSP/DolbyDDP , though afterward the Mango player (from within android) will not work, so i debloated it within the module. Though access to Mango player can obviously be achieved by booting into Mango OS. So i dont see this as an issue. Or.. disable my module and reboot.
To access the module HERE
--->

[MAGISK]Notch Killer - Videos and Apps ignores the notch

I couldn't find a working module for the 7T so I created one.
What it does?
In apps like Netflix and Full-screen games the screen stretches only until it reaches the notch.
This module basically allows to ignore the notch and stretch the display around it.
Netflix example:
Before:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
After:
Click to expand...
Click to collapse
Instructions:
Download the attached zip and extract the NotchKillerOOS Directory.
Move the NotchKillerOOS directory into your phone.
Using ROOT explorer like "ES file explorer" move the folder into /data/adb/modules
Reboot your device
Go to the Developer options, click on "Display cutout" and choose "Notch killer!"
Please report any bugs.
Enjoy

Not working for me.

QbaxPl said:
Not working for me.
Click to expand...
Click to collapse
You got any error?
Wrong behavior?
Happens on a specific app?
Please explain the issue you're having.

I dont have option to choose Notch killer in Dev options.

I followed your instructions and now I have a Notch Killer Magisk module enabled and after a reboot I went to developer settings--> display cutout
There wasn't any option like Notch Killer
Please see attached screenshot

QbaxPl said:
I dont have option to choose Notch killer in Dev options.
Click to expand...
Click to collapse
MrGimpGrumble said:
I followed your instructions and now I have a Notch Killer Magisk module enabled and after a reboot I went to developer settings--> display cutout
There wasn't any option like Notch Killer
Please see attached screenshot
Click to expand...
Click to collapse
Hi please try the following steps:
1. Uninstall the NotchKillerOOS module.
2. Download the new zip that is attached to this message.
3. Extract the zip and move it to your phone.
4. Move the NotchKillerOOS directory to /data/adb/module
5. Make sure that the file structure is like the following "/data/adb/modules/NotchKillerOOS/system/product/overlay/DisplayCutoutEmulationTall/DisplayCutoutEmulationTallOverlay.apk"
and NOT like:
"/data/adb/modules/NotchKillerOOS/NotchKillerOOS/system/product/overlay/DisplayCutoutEmulationTall/DisplayCutoutEmulationTallOverlay.apk"
6. Go to Magisk manager and make sure that the module is enabled.
7. Reboo the phone and try again.
If you still have problems, please send me your "DisplayCutoutEmulationTallOverlay.apk" file that is located under /product/overlay/DisplayCutoutEmulationTall.
(The one that is on your phone, not the one that came with the module).
Let me know if it works.

yaaria said:
Hi please try the following steps:
1. Uninstall the NotchKillerOOS module.
2. Download the new zip that is attached to this message.
3. Extract the zip and move it to your phone.
4. Move the NotchKillerOOS directory to /data/adb/module
5. Make sure that the file structure is like the following "/data/adb/modules/NotchKillerOOS/system/product/overlay/DisplayCutoutEmulationTall/DisplayCutoutEmulationTallOverlay.apk"
and NOT like:
"/data/adb/modules/NotchKillerOOS/NotchKillerOOS/system/product/overlay/DisplayCutoutEmulationTall/DisplayCutoutEmulationTallOverlay.apk"
6. Go to Magisk manager and make sure that the module is enabled.
7. Reboo the phone and try again.
If you still have problems, please send me your "DisplayCutoutEmulationTallOverlay.apk" file that is located under /product/overlay/DisplayCutoutEmulationTall.
(The one that is on your phone, not the one that came with the module).
Let me know if it works.
Click to expand...
Click to collapse
Yeah bro, I can confirm it works. But there's a slight problem, the icons on the status bar tends to hide behind the notch, any way to make them hide as they reach towards the notch? (like they do in the default notch mode)

Minimilised_MR said:
Yeah bro, I can confirm it works. But there's a slight problem, the icons on the status bar tends to hide behind the notch, any way to make them hide as they reach towards the notch? (like they do in the default notch mode)
Click to expand...
Click to collapse
Unforchently for now, I cannot change the location of the status bar icons and text.
So you can switch between the mods whenever you need them.

yaaria said:
Unforchently for now, I cannot change the location of the status bar icons and text.
So you can switch between the mods whenever you need them.
Click to expand...
Click to collapse
I think it is possible to automatically set it on/off with the desired apps using Tasker. But I didn't test it yet, just thinking it'll work.
Sent from my OnePlus7T using XDA Labs

Sharing in case people who use this module would like to automate using tasker.
Use following shell command:
Enable
Code:
cmd overlay enable --user 0 com.android.internal.display.cutout.emulation.tall
Disable
Code:
cmd overlay disable --user 0 com.android.internal.display.cutout.emulation.tall
Enjoy fullscreen!

Is there any way I can use it without root (magisk) by ADB?

Thank you bro it works on my Rooted OP7T.
side note....
If you download systemuituner and turn on immersive mode it makes ur module PERFECT!!
Again thank u.... @yaaria

ryantf420 said:
Thank you bro it works on my Rooted OP7T.
side note....
If you download systemuituner and turn on immersive mode it makes ur module PERFECT!!
Again thank u.... @yaaria
Click to expand...
Click to collapse
Good to know, thank you

I have followed instructions but no way to see option notch killer in developer options under cutout...
Magisk see module, properly extracted files like u adviced...
Any ideas? Want to watch Netflix without notch
Posted using OnePlus 7T via Tapatalk

the bottom option translates to high notch. select the bottom option should be good if followed file instructions...

Oh... I was looking for "Notch Kill" not translated to Polish hehe. I selected very bottom which means like "high cutout" option and it's working. Thank you so much.
Posted using OnePlus 7T via Tapatalk

Riski3Run said:
Oh... I was looking for "Notch Kill" not translated to Polish hehe. I selected very bottom which means like "high cutout" option and it's working. Thank you so much.
Posted using OnePlus 7T via Tapatalk
Click to expand...
Click to collapse
no problem ?
---------- Post added at 02:27 PM ---------- Previous post was at 02:25 PM ----------
I personally enjoy using "systemuituner" app immersive mode "full" with this module. Its a really good combo!!! ?

Systemuituner is just app or another Magisk module?
Posted using OnePlus 7T via Tapatalk

Riski3Run said:
Systemuituner is just app or another Magisk module?
Posted using OnePlus 7T via Tapatalk
Click to expand...
Click to collapse
App located here on Xda....

These are some example screenshots of notch killer and Systemuituner immersive mode on together.. No status bar until u touch top.
I love it.
all screen!!! ?