Develop Bugs

[Guide] [monet] Flashing GSI Roms

Hey y'all, after 2 days of headaches with a semi bricked device from a friend i was finally able to get a GSI Rom running.
Here's what you need:
1. Unlocked Bootloader
2. Stock Recovery
https://mega.nz/file/m4Q0iJpR#wP9U5gpXwTVrSWezkaoJqDjgb0zadULTLpb8kLAZJRE
3. GSI Rom (i used Bliss and it works flawless)
https://forum.xda-developers.com/pr...ent/unofficial-blissroms-q-mod-bless-t4138687
4. A PC running Linux
So the problem is that this device comes with a super partition. That means TWRP isnt able to flash a System Image because there is not a system partition instead there is this super partition wich is new to Android 10 and is dynamic. However you need to boot to fastbootd mode to access the system partition inside the super partition.
Important!! You need Stock Recovery for this you can not boot into fastbootd via TWRP at this moment. Also you need Linux because there is only a unsigned Driver for Windows for the fastbootd mode and i dont recommend using unsigned chinese drivers.... i use Manjaro that worked out of the box.
Mi 10 Lite 5G is Treble A/B enabled so we need an A/B Rom Bliss is providing that. Follow these steps to flash the GSI.
1. Reboot to bootloader then enter: fastboot reboot fastboot (there should be the text fastbootd in yellow)
2. fastboot -w (there is maybe an error but this is ok)
2. fastboot erase system
3. fastboot flash system "GSI-ROM-name-without-quotes".img
4. fastboot reboot bootloader
5. fastboot reboot
If it bootloops your GSI is not compatible (Havoc for example) just try it till you're satisfied. This is an first step for Stock Android on our Device. i will build some Custom Roms in the next weeks.
EDIT:
Ok i got Bliss fully up and running Fingerprint and even Google Pay works! There is some things you need to do though.
Preparation:
Stock Recovery
Bliss GSI
Audio Policy Fix.xml: https://mega.nz/file/i4QWkbSD#a3U90V1kk0S01DYxjN3YH-0HsAbo_UUU_rMd7LhYLFc
Procedure:
1. Boot into fastbootd like described above and flash the GSI
2. After boot set Magisk there should be a Magisk link if you open it this Procedure should run automatically
3. In Magisk Download MagiskHide Props Config, Download it and install it reboot.
4. Run in terminal on the device (i used Termux) the command "props" (without quotes) and select option 1 then select from the list Xiaomi and then Device Mi 10 Lite 5G Europe after that go back to main menu and select option 2 select again Mi 10 Lite 5G and nothing else
5. Reboot and check Safety Net it should get a pass if not you did something wrong
6. Download a Root File explorer (i used JRummys Root Explorer)
7. Copy the Audio Policy xml to your phone and replace the file on /vendor/etc to get Headphone Jack and Headset Mics working
8. Go to Settings - phh treble settings - Qualcomm Features and Tick use alternate audio policy
9. Go back to misc Features and tick disable audio effects this gets Notification and Alarm Sounds and Ringtone working.
10. Reboot
11. Check if Bluetooth works it should if not well i honestly dont know for sure
And your Device should run perfectly fine, its crazy fast and i got a 8h Screen on Time. Well thats for me good enough for now im back to cocking Custom Roms

I was struggling with this for a very long time and couldn't flash any GSI!! Thank you so much for this guide, I will try it now and give you a feedback, but where can I find the unsigned chinese drivers for windows? and do you think I can flash android 11 GSI`s like Phh on our device??

Honestly i dont know, it should work just try it. Worse that can happen is a bootloop. I added the Stock Recovery in First Post. And here is a link to the unsingned Xiaomi Driver use at your own risk!
https://c.mi.com/oc/thread-3312019-1-0.html

works perfectly, then I tried to flashing Bliss 14.0.3 and it booted up and worked and now I`m testing ProjectStreak android 11 GSI also boots and almost everything works except for the fingerprint sensor and A LOT of lag in the System UI! think I will revert back to Bliss 12.2 for now!
Thanks again!

I cannot receive SMS with Bliss.
@Legacyleader
I see that you are from Germany. I am also from Germany. Do you have Telegram?

Hi @Benni1123 yes i have telegram, SMS Problem could be solved via APN Settings. In my Case Drillisch had no APN setup after that it was working fine.

Legacyleader2 said:
Hi @Benni1123 yes i have telegram, SMS Problem could be solved via APN Settings. In my Case Drillisch had no APN setup after that it was working fine.
Click to expand...
Click to collapse
Hi Legacyleader you save this device, thanks

i can't seem to get any GSI rom to boot, alway's end up in a bootloop. My Monet Device is unlocked with the latest V12.0.3.0.QJIEUXM Rom.
It enters fastbootd (yellow letters) but when i enter fastboot -w i get error: segmentation fault.
If i flash system after this and reboot, i always end up in a bootloop (device boots to Mi logo and instantly reboots, goes back to mi logo, instantly reboots etc..)
It feels like im missing something obviously? ;-)
@Legacyleader2 do i need to wipe anything after the system flash? if i follow your steps i always end up bootlooping. Tried Andy's Lineage17.1 GSI, Phh AOSP GSI(v222), tried bless, bliss all of them are instant bootlooping. When i flash superpartition over it, system instantly boots stock rom.
Any idea what i'm doing wrong?

@Legacyleader2 look DM please

Hello,
Mi 10 Lite (Monet) owner here! (and new on XDA)
These detailed instructions almost convinced me to make the jump and flash a GSI on my phone purchased recently. It looks like the "standard" procedure for flashing a GSI ROM with fastbootd.
I know I can fallback on the official MIUI ROM in case of problem, but before flashing, I would like to ensure there is at least one GSI which can keep my phone working as a phone, with all basic features working good.
Could you please provide a feedback about your experience?
1) Which GSI did you try?
I am about to try phhusson LineageOS's GSI first, and if it does not work, I'll try Bliss as it looks like it works like a charm
2) How is the battery life affected?
I really enjoy the battery life with MIUI, I don't want it to be cut by two
3) Does the cameras (front, back, pictures/videos modes) still work?
4) Do calls and SMS work?
5) During calls, is the call audio quality good on both sides?
I had issues with some ROM on my previous phones like echos.
6) Does the fingerprint reader work?
Additionally, what about Bluetooth, NFC, speakers, audio output from jack, applications/games performance, ...?
Maybe we could create a post to summarize our successful experiences.
Thank you for your time

does someone successfully installed xposed in GSI bliss room thanks?

Hello everyone one!
I wanted to share my experience after this amazing guide, I managed to follow the guide and flash bliss GSI then I was flashed A LOT of different android 11 GSIs and I was using the AOSP 11 GSI for a week (everything was okay except for the fingerprint & Bluetooth audio).
Then I stumbled upon a MIUI 12 Global build based on android 11 for monet and I'm using it now for the oast week and it's pretty stable.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Does the vendor from this build affect flashing GSIs on this phone?
(Excuse my weak english)

Finally I have gone through GSIs.
On my working list.
1. Bless ver 224
2. Crdroid ver 224
3.Losq ver 224
4.Decendant X latest
I have not found any other gsi booting some body may add to the other GSIs booting.
I have not had any luck booting a port gsi.

Crdroid passes safety net out of the box.
For audio bug just tick alternative audio in phh settings and reboot.

Hmmm... I got HavocOS to work.
I used the vbmeta.img, dtbo.img and boot.img off of the latest Arrow rom (Arrow-v11.0-monet-OFFICIAL-20210412-VANILLA.zip), and then flashed the HavocOS GSI image to system, and it... didn't bootloop! It actually booted! Everything seems to work.
I just got it to run, so I'll have to play around a bit before I can give any definite guarantee, but so far everything seems fine. 5G is there as well.
Well, fingerprint doesn't work. Darn.
The two I've gotten to work are:
https://download.havoc-os.com/arm64-ab/Havoc-OS-v4.1-20210208-arm64-ab-Official.img.xz
https://download.havoc-os.com/arm64-ab/Havoc-OS-v4.1-20210208-arm64-ab-Official-GApps.img.xz

How To Guide Android 12 beta

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
https://forums.oneplus.com/threads/...gram-for-oneplus-9-and-oneplus-9-pro.1448673/
Ready to get started on the Android 12 Beta?
OnePlus 9 Pro (Fixed version from 3rd June 2021)
Note: Please note this build is not suitable for devices in North America. The updated version will be shared later.
Spoiler: Rollback to Android 11
Want to go back to Android 11? Download the Rollback package from the links below:
Download links for OnePlus 9 Pro rollback (Android 11) packages:
OnePlus 9 Pro NA Version
OnePlus 9 Pro IN Version
OnePlus 9 Pro EU Version
DP to MP rollback guide - via Local OTA update
Note: This upgrade method will erase all the contents of the phone, please be sure to backup first.
Download the latest ROM upgrade zip package from the specified server.
Copy the Rollback package to the phone storage.
Install this apk. You'll need it to rollback. Then, open the app -> tap the top right gear icon -> find the downgrade package and tap it -> wait to finish the installation -> tap reboot
After the upgrade is complete, click Restart.
Update successful.

Well, that was fast. I am excited as hell

Android 12 Developer Preview Program
www.oneplus.com
If you can download it you're a better man than me, just keeps sending me in a loop back to the forum post.
OK, Never mind, they jumped the gun...
Ready to get started on the Android 12 Beta?
OnePlus 9
OnePlus 9 Pro
Note: Links will be added shortly
Click to expand...
Click to collapse
Known Issues
All data will be cleared while flashing the build
Video call function is not available
Fingerprint unlock and face unlock are unavailable
Certain UI screens look less than desirable
Some apps may not function as expected
System stability issues
Click to expand...
Click to collapse
Woah, think I'll wait for the DP2

djsubterrain said:
Android 12 Developer Preview Program
www.oneplus.com
If you can download it you're a better man than me, just keeps sending me in a loop back to the forum post.
OK, Never mind, they jumped the gun...
Woah, think I'll wait for the DP2
Click to expand...
Click to collapse
omg. I thought they were link to upgrade, but it was for downgrade from 12 -> 11.
edit:
Looks like they added links
Ready to get started on the Android 12 Beta?
OnePlus 9
OnePlus 9 Pro
Note: Please note this build is not suitable for devices in North America. The updated version will be shared later.

Yep but just for 2120 as of right now… waiting… ..

Weird, rollbacks are the full rom. Spose, it's a completely different version.

galza said:
Yep but just for 2120 as of right now… waiting… ..
Click to expand...
Click to collapse
I think that means the whole family, they haven't specified a region and they have individual rollback regions. Beta are all usually Global builds anyway

WARNING : DO NOT ROOT FOR NOW, IT'S NOT WORKING THE SAME AS OXYGENOS11
Mirrors :
OnePlus 9 Pro OxygenOS 12 Developer Preview 1(LE2120_11_C_OTA_1020_all_a819b6_00011011.zip) :
Download : https://www.androidfilehost.com/?fid=2188818919693807093
MD5 : 05d963bbc7b0d9163de39f702e2d91d5
REMOVED ROOTED BOOT IMAGE
Unpacked Image Collection :
OxygenOS12_OP9P_DP1_Image_Collection.zip | by djsubterrain for OnePlus 9 Pro
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
www.androidfilehost.com
MD5 : https://www.androidfilehost.com/?fid=2188818919693807103
Download links for OnePlus 9 Pro rollback packages:
OnePlus 9 Pro NA Version
OnePlus 9 Pro IN Version
OnePlus 9 Pro EU Version
VERY EARLY LOOK :
First thoughts :
Vibration motor fans will be pleased, it's a lot more prominent.
Very slow boot on this build
Boot logo is a bit weird, OnePlus logo bleeding from white to red and alternating
If you install it then reduce the display size, default is horrible.

djjafi said:
omg. I thought they were link to upgrade, but it was for downgrade from 12 -> 11.
edit:
Looks like they added links
Ready to get started on the Android 12 Beta?
OnePlus 9
OnePlus 9 Pro
Note: Please note this build is not suitable for devices in North America. The updated version will be shared later.
Click to expand...
Click to collapse
not a downgrade at all..you went from to a a newly released beta and with that comes all types of issues. this is more for developers who want to start creating apps and work out bugs for their apps. Would not use this yet for your daily driver....once it becomes more stable than absolutely

Install is broken, stuck at the update data. Loops around.
Also no joy with MSM tool but it's late and i'm tired to play about too much.

AbandonedTrolley said:
Install is broken, stuck at the update data. Loops around.
Also no joy with MSM tool but it's late and i'm tired to play about too much
Click to expand...
Click to collapse
Same here. Param preload fails every time. Multiple ports/cables; driver shows just fine. Really hoping they can fix this with an update tool...

PhoenixPath said:
Same here. Param preload fails every time. Multiple ports/cables; driver shows just fine. Really hoping they can fix this with an update tool...
Click to expand...
Click to collapse
Sry ur having same problems I had the other day after trying to come back from test build(PA). Kept getting param preload fail. I had to use Pl dumper and put flashall.bat in folder and flash back to stock in fastboot
djsubterrain said:
I think that means the whole family, they haven't specified a region and they have individual rollback regions. Beta are all usually Global builds anyway
Click to expand...
Click to collapse
On oxygen updater the beta builds show up when u pick 9pro EU and 9pro IND

was able to try it, major bug? stuck at 60hz camera was working fine (all of them)
PhoenixPath said:
Same here. Param preload fails every time. Multiple ports/cables; driver shows just fine. Really hoping they can fix this with an update tool...
Click to expand...
Click to collapse
Use The Latest drivers https://www.mediafire.com/file/5wc5nk5adevatrj/QDLoader_HS-USB_Driver_64bit_Setup.exe/file

OK, I finally got my device back.
DO NOT ROOT THE DEVELOPER PREVIEW!
It won't work the same as Android 11 and will end up bricking your phone, thankfully I got the MSM to work, it had said it wasn't compatible with EU build before.

-

Tried on my OP9 last night. Before reading it's not for NA. Even patched magisk after OTA. found out the hard way. Luckily T-Mobile msm came in handy lol.

for going back to A11 issues, just flash manually or run script in *fastbootd to flash both slots a/b (via from payload_dumper) with your latest variant zip.
Oneplus phones make it so easy...
flash 9 simple images
boot a/b
system a/b
system_ext a/b
odm a/b
product a/b
vbmeta a/b
vbmeta_system a/b
vendor a/b
dtbo a/b
most likely one of slots won't flash; ignore
fastboot - w
boot up
*fastbootd (fastboot reboot fastboot)
if not able to boot up in fastbootd, flash recovery img (from payload) in Bootloader.

On Android 11 OOS, clicking on any notification from Notification drawer takes around a second to open the app. For example, if you click on Gmail notification, it takes around a second to open Gmail app. Can anyone confirm if that is fixed on Android 12 OOS Beta?

Dude, it's a first developer preview, there won't be any "fixes"
Developer Preview is like a proof of concept and for app developers to test their apps on different phones on the new OS version.
When OxygenOS12 reaches the betas is when OnePlus will start working on features, fixes, etc.

So no one managed to install this preview on the OP 9 pro ?
It was a 100% miss?

Development [ROM][OFFICIAL][11] StatiXOS v4.2

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
StatiXOS for OnePlus 9 Pro (lemonadep)
What is StatiXOS?
StatiXOS is a custom ROM based on the Android Open Source Project aiming to be minimal while providing quality of life improvements and up to date security patches.
Spoiler: Known Issues
None!
Please report anything you run into!
Spoiler: Changelogs, Feature Screenshots
Changelogs
Screenshots
Spoiler: Download StatiXOS Here!
Primary
SourceForge Mirror
Spoiler: How To Flash
We have uploaded a factory image-esque zip that you can apply in fastboot.
1. Simply download the zip
2. Reboot your device to bootloader
3. Run fastboot update --skip-reboot path/to/download.zip
3. If switching from a different ROM, be sure to wipe in recovery. If you use --skip-reboot, you will be left in fastbootd, which you can tap "Enter Recovery" to enter recovery mode to wipe the device.
Spoiler: Stay in touch with our Telegram channels!
Official Chatroom
Official Releases & Announcements Channel
​
Android OS version: 11
Linux Kernel Version: 5.4
Source code: GitHub
Code Review: Gerrit

Thank you for the new Rom. Finally we are getting amazing roms...

no FC's . not able to hide gesture pill or battery icon. Also magisk fails safetynet, FOD enrollment issues, and rcs not working...

Judging from the screenshots this looks really nice.. What is there difference between nuclear and official? Beta? Thanks wither way I'm gonna try nuclear

avid_droid said:
Ill flash for the hell of it since im returning to stock
Click to expand...
Click to collapse
What's your method for returning to stock? Do you have to MSM tool every time?

dkcats3 said:
What's your method for returning to stock? Do you have to MSM tool every time?
Click to expand...
Click to collapse
U can extract files from OS ota and fastboot back.

Shooter7889 said:
U can extract files from OS ota and fastboot back.
Click to expand...
Click to collapse
Does this work on the AA model? Theres only a full zip available for the 11.2.4.4 update

ggpew2 said:
StatiXOS for OnePlus 9 Pro (lemonadep)
What is StatiXOS?
StatiXOS is a custom ROM based on the Android Open Source Project aiming to be minimal while providing quality of life improvements and up to date security patches.
Spoiler: Known Issues
None!
Please report anything you run into!
Spoiler: Changelogs, Feature Screenshots
Changelogs
Screenshots
Spoiler: Download StatiXOS Here!
Primary
SourceForge Mirror
Spoiler: How To Flash
We have uploaded a factory image-esque zip that you can apply in fastboot.
1. Simply download the zip
2. Reboot your device to bootloader
3. Run fastboot update --skip-reboot path/to/download.zip
3. If switching from a different ROM, be sure to wipe in recovery. If you use --skip-reboot, you will be left in fastbootd, which you can tap "Enter Recovery" to enter recovery mode to wipe the device.
Spoiler: Stay in touch with our Telegram channels!
Official Chatroom
Official Releases & Announcements Channel
​
Android OS version: 11
Linux Kernel Version: 5.4
Source code: GitHub
Code Review: Gerrit
Click to expand...
Click to collapse
Mmmmmmmmmmm, lemonade

Great to see you and your rom here! Kudos

Does AOSP (this build) contain the wifi calling software to make Verizon think I bought the phone from them so I can use that feature. They don't even sell the 8 pro or 9 pro haha, thank you for your development! They have their official OnePlus 8 VZW phone but wifi calling won't work with unlocked phones

i'm sorry i wonder if it could be applied to one plus 9 ,not 9 pro
thanks

amonstercattt said:
i'm sorry i wonder if it could be applied to one plus 9 ,not 9 pro
thanks
Click to expand...
Click to collapse
This build will not flash on the OnePlus 9.

biggiesmalls657 said:
Does AOSP (this build) contain the wifi calling software to make Verizon think I bought the phone from them so I can use that feature. They don't even sell the 8 pro or 9 pro haha, thank you for your development! They have their official OnePlus 8 VZW phone but wifi calling won't work with unlocked phones
Click to expand...
Click to collapse
As far as I know, Verizon does not support WiFi Calling on any phones bought outside of their stores.

ggpew2 said:
As far as I know, Verizon does not support WiFi Calling on any phones bought outside of their stores.
Click to expand...
Click to collapse
I dont think that's true, I bought my unlocked galaxy S20+ straight from samsung and it worked there. But I do think the WiFi calling is restricted on verizons side, and I think no ROM will get it working on the OP9P without tricking Verizon somehow.

So flash Oneplus 8 VZW image lmao

which version do i download for AA? pheonix? does it matter?

Veid71 said:
which version do i download for AA? pheonix? does it matter?
Click to expand...
Click to collapse
All Oneplus 9 Pro are codename Lemonadep

dkcats3 said:
All Oneplus 9 Pro are codename Lemonadep
Click to expand...
Click to collapse
how do you install magisk once you have the OS installed?

Veid71 said:
how do you install magisk once you have the OS installed?
Click to expand...
Click to collapse
You can extract the boot image, install the magisk app, use the app to patch the boot image, and flash it
ORRRRRR
The easy way is to just flash the magisk.apk the same you would flash a zip, and then when you boot into the OS, open the new magisk app that is there and follow the instructions

dkcats3 said:
You can extract the boot image, install the magisk app, use the app to patch the boot image, and flash it
ORRRRRR
The easy way is to just flash the magisk.apk the same you would flash a zip, and then when you boot into the OS, open the new magisk app that is there and follow the instructions
Click to expand...
Click to collapse
do you know if anyones run into an issue with not having mobile data?

[Stable][OTA][miatoll] Ubuntu Touch for Xiaomi Redmi Note 9 Pro - 9 Pro Max - 9S - Poco M2 Pro

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
​Ubuntu Touch​Development builds.​Here be dragons​​What is working (Device Pages):
- Redmi Note 9 Pro
(https://devices.ubuntu-touch.io/device/joyeuse/)
- Redmi Note 9s/Pro India
(https://devices.ubuntu-touch.io/device/curtana/)
- Redmi Note 9 Pro Max
(https://devices.ubuntu-touch.io/device/excalibur/)
- Poco M2 Pro (https://devices.ubuntu-touch.io/device/gram/)
Instructions:
- Download the latest available Android 10 firmware for your device.
- Download and flash using the Ubports Installer
Links:
- Device Repository: https://gitlab.com/ubports/community-ports/android10/xiaomi-redmi-note-9-pro
- Kernel Sources: https://gitlab.com/ubports/community-ports/android10/xiaomi-redmi-note-9-pro/kernel-xiaomi-sm6250
Contribuitors:
- TheKit
- 4PRETURE
Thanks to:
- Ubports Team
Donate:
- PayPal
- Revolut
- You can also donate to the UbPorts Foundation and support them here. Ubuntu Touch wouldn't exist now without them.

OTA status:
!! Please avoid reporting bugs here as it's hard to keep track of them. Instead, use the GitLab issues page on our repository !!
19-11-2021:
- Released stable ota.
31-10-2021:
- Upstreamed to 4.14.253 by @Loptr4
- Notification leds fixed by @Loptr4
- Added wireguard support
- Added docker support
- Updated auto brightness values
This update is available on the devel channel and should code to rn in ~1 week
28-10-2021:
- Completed Anbox/Waydroid patches
- Released the Release Candidate channel
27-09-2021:
- Fixed fingerprint pressing the enter key on goodix phones.
23-09-2021:
- Fixed anbox. Installing android apps using anbox is possible now in this port.
- performance and stability updates
23-09-2021:
- The miatoll devices are now available at https://devices.ubuntu-touch.io/
- Added automatic brightness config (still needs a little tweaking)

Awesome work!

aweeeesomeeeeee

Is it possible to dual boot with android?

whatpigs said:
Is it possible to dual boot with android?
Click to expand...
Click to collapse
No. It isn't possible. Sorry.
But you can install anbox on it and use android apps

Amazing Work!! BTW I can't Get ADB to work. I've enabled developer mode and restarted(And I have a Password) but I still don't see anything when I run adb devices

Cilekcigs said:
Amazing Work!! BTW I can't Get ADB to work. I've enabled developer mode and restarted(And I have a Password) but I still don't see anything when I run adb devices
Click to expand...
Click to collapse
If you had read the post correctly you would have noticed that adb isn't working.
For the moment you can use ssh [email protected] instead of ADB (you still need to have your usb plugged in)

I get this error
Exec '/system/bin/sh' failed: Too many symbolic links encountered"}​
what to do?

kleinergoo said:
I get this error
Exec '/system/bin/sh' failed: Too many symbolic links encountered"}​
what to do?
Click to expand...
Click to collapse
fixed it with flashin the newest MIUI version but Android 10 for my region, i have global device so i flash the newest miui 12 android 10 global rom

Hi
I want to know is it safe to downgrade from latest version of miui(amdroid 11) to android 10?

Actually what on earth Ubports Installer do while installing Ubuntu touch? i can't get my device working again after flashing Official MIUI V12.0.1.0 ROM with flash_all script.. bootloop on Redmi logo screen, can access Recovery and wiped data/Cache but still bootloop, tried to erase misc which is already flashed but still same.. bricked

Hjavid said:
Hi
I want to know is it safe to downgrade from latest version of miui(amdroid 11) to android 10?
Click to expand...
Click to collapse
Yes it is safe. But make sure you're downloading the right stock ROM for your phone
ubuntu-touch-miatoll/FIRMWARE.md at main · ubuntu-touch-miatoll/ubuntu-touch-miatoll
Contribute to ubuntu-touch-miatoll/ubuntu-touch-miatoll development by creating an account on GitHub.
github.com

mohamedfaky said:
Actually what on earth Ubports Installer do while installing Ubuntu touch? i can't get my device working again after flashing Official MIUI V12.0.1.0 ROM with flash_all script.. bootloop on Redmi logo screen, can access Recovery and wiped data/Cache but still bootloop, tried to erase misc which is already flashed but still same.. bricked
Click to expand...
Click to collapse
Pay attention to the firmware/ROM you're using. Xiaomi is pretty confusing when it comes to our device
Also make sure you've checked both of the boxes in UT installer (Wipe and flash)
ubuntu-touch-miatoll/FIRMWARE.md at main · ubuntu-touch-miatoll/ubuntu-touch-miatoll
Contribute to ubuntu-touch-miatoll/ubuntu-touch-miatoll development by creating an account on GitHub.
github.com

kleinergoo said:
fixed it with flashin the newest MIUI version but Android 10 for my region, i have global device so i flash the newest miui 12 android 10 global rom
Click to expand...
Click to collapse
I'm glad you found a fix. Sorry I didn't answered but I'm more focused on the gitlab issues page

nitanmarcel said:
Pay attention to the firmware/ROM you're using. Xiaomi is pretty confusing when it comes to our device
Also make sure you've checked both of the boxes in UT installer (Wipe and flash)
ubuntu-touch-miatoll/FIRMWARE.md at main · ubuntu-touch-miatoll/ubuntu-touch-miatoll
Contribute to ubuntu-touch-miatoll/ubuntu-touch-miatoll development by creating an account on GitHub.
github.com
Click to expand...
Click to collapse
First of all Thanks for your reply, i managed to fix the issue but this really confusing, still don't know why bootloop happened..
i have redmi Note 9S global which has code name curtana, i flashed curtana_global_images_V12.0.1.0.QJWMIXM_20201022.0000.00_10.0_global with flash_all before to downgrade my device to Android 10 to install Ubuntu touch and it worked well but when i was coming back from Ubuntu touch by flashing the same ROM with flash_all it didn't work and caused bootloop on Redmi logo.. tried to flash curtana_global_images_V12.0.4.0.RJWMIXM_20210723.0000.00_11.0_global_8f5fa1bf31 but same thing.. then i tried to use recovery to flash the device as the stock recovery works as well as fastboot so tried to sideload zip version of MIUI 12.0.4 (curtana_global_images_V12.0.4.0.RJWMIXM_20210723.0000.00_11.0_global.zip) but faced error "adb: failed to read command: No error", trying to sideload the package with custom recovery PBRP fixed the issue and recovered the phone from bootloop.. i don't know now if i should lock the bootloader or issues like this may happen with the later OTA updates, also i wanted to try a custom rom but i don't know if i should do that or not as i still don't know the reason that caused bootloop, do Ubuntu touch do something with partition table? but if that right i should have faced problems while flashing partitions with fastboot.. and why only flashing with recovery worked? both aren't the same roms? and only custom rom.. while the package should be signed by Xiaomi and acceptable, what does this adb error "failed to read command: No error" .. so confusing.

mohamedfaky said:
First of all Thanks for your reply, i managed to fix the issue but this really confusing, still don't know why bootloop happened..
i have redmi Note 9S global which has code name curtana, i flashed curtana_global_images_V12.0.1.0.QJWMIXM_20201022.0000.00_10.0_global with flash_all before to downgrade my device to Android 10 to install Ubuntu touch and it worked well but when i was coming back from Ubuntu touch by flashing the same ROM with flash_all it didn't work and caused bootloop on Redmi logo.. tried to flash curtana_global_images_V12.0.4.0.RJWMIXM_20210723.0000.00_11.0_global_8f5fa1bf31 but same thing.. then i tried to use recovery to flash the device as the stock recovery works as well as fastboot so tried to sideload zip version of MIUI 12.0.4 (curtana_global_images_V12.0.4.0.RJWMIXM_20210723.0000.00_11.0_global.zip) but faced error "adb: failed to read command: No error", trying to sideload the package with custom recovery PBRP fixed the issue and recovered the phone from bootloop.. i don't know now if i should lock the bootloader or issues like this may happen with the later OTA updates, also i wanted to try a custom rom but i don't know if i should do that or not as i still don't know the reason that caused bootloop, do Ubuntu touch do something with partition table? but if that right i should have faced problems while flashing partitions with fastboot.. and why only flashing with recovery worked? both aren't the same roms? and only custom rom.. while the package should be signed by Xiaomi and acceptable, what does this adb error "failed to read command: No error" .. so confusing.
Click to expand...
Click to collapse
Hi. Someone confirmed that everything worked fine on 9S curtana, but I still don't get what you're doing wrong. You are welcomed to join @ut_miatoll group on telegram and we can figure this out (the person who tested it on 9S is also there and maybe he can guide you in installing the port.
About the adb error I don't know if it comes from the installer or from your platform tools.
Thanks and I'm waiting for you on the group
Btw, someone has the same problem as you and reported it in a gitlab issue, you can also take a look there:
Installation Fails (#1) · Issues · UBports / Porting / Community Ports / android10 / Xiaomi Redmi Note 9 Pro - 9 Pro Max - 9S - Poco M2 Pro / xiaomi-miatoll · GitLab
After getting into fastboot and installer installing firmware the phone doesn't reboot to install screen but rather freezes. When I reboot after that the phone reboots to MIUI...
gitlab.com

Hello,
Firstly, thanks for supporting this great OS for our phones and I'm looking forward to start using it as my daily driver.
However I have one question about anbox and android apps. Did anyone tried to run any banking apps? Those are mandatory to me and for example Google Authenticator fro 2FA.
Sorry if this is the wrong place to aks, if it is I will remove the comment.
Greetings,
DyXen

DyXen said:
Hello,
Firstly, thanks for supporting this great OS for our phones and I'm looking forward to start using it as my daily driver.
However I have one question about anbox and android apps. Did anyone tried to run any banking apps? Those are mandatory to me and for example Google Authenticator fro 2FA.
Sorry if this is the wrong place to aks, if it is I will remove the comment.
Greetings,
DyXen
Click to expand...
Click to collapse
Hi.
I don't know about anbox but I've tried Revolut on waydroid and works very fine.
Anyway, waydroid crashes a lot and anbox is old and supports only x86 applications. A suggestion is that if you rely on those app you could wait until waydroid becomes stable enough.

Lately, there have been reports of the installation failing with the UBports Installer 0.9.1-beta. To avoid any problems use the following installer versions based on your OS:
Windows: https://github.com/ubports/ubports-...8.8-beta/ubports-installer_0.8.8-beta_win.exe
Linux: https://github.com/ubports/ubports-.../ubports-installer_0.8.8-beta_linux_amd64.deb
MacOS: https://github.com/ubports/ubports-...8.8-beta/ubports-installer_0.8.8-beta_mac.dmg
Please reply to the following issue if you had problems with the installer and they got fixed by using 0.8.8-beta
Ubuntu Touch fails to install, phone reboots in MIUI (#3) · Issues · UBports / Porting / Community Ports / android10 / Xiaomi Redmi Note 9 Pro - 9 Pro Max - 9S - Poco M2 Pro / xiaomi-miatoll · GitLab
Lately, there have been reports of the installation failing with the UBports Installer 0.9.1-beta. To avoid any problems use the following installer versions based on your OS:
gitlab.com

Development [UNOFFICIAL][RECOVERY] TWRP Recovery 3.7_012 (NEW - A13 AOSP BETA TEST)

TWRP Recovery Project​
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Downloads TWRP​Installation (for all MIUI roms )​
Code:
fastboot boot boot_lisa.img
We boot into the recovery and flash the zip through it.
In the Fox folder you will find magisk + RW mount. (installation optional).
We clean the dalvik and reboot into the system
Works:
ADB
Decryption of /data
MTP
Flashing (opengapps, roms, images and so on)
Backup/Restore
USB OTG
CPU temperature
Vibration
A/B partition functions
ADB SIDELOAD
SD-CARD
PS: For AOSP - Please wait
You can donate on the link below:
Donate​​
Spoiler: SCREENSHOT
OrangeFox Recovery | Build in Cloud
Device Tree TWRP
My Telegram
NEW 23/04/2023: OrangeFox BetaTest / a13 - vendorboot recovery AOSP/MIUI
Version Information
Status: Unofficial
Current Release Version: 3.7_012
Release Date: 27-Feb-2023

This is very good news, it was about time that Lisa had a recovery for Android 13.
Thanks for sharing.

What a wonderful new! Previous version for Android 12 where absolutely perfect, I am sure that this update is, or soon will be also an excellent version.
Thank you very very much!
@Dkpost3 :
I would like to send a little contribution, have you a PayPal account?
Edit: I just installed it on my Lisa running Xiaomi.eu miui 13 weekly version (Android 12): It works perfectly on Android 12, the only limit (it's a beta version) is that it can't read the ext storage. I immediately installed the update to Xiaomi.eu update to miui 14 (14.05) stable without formatting. I don't notice any problem till now.
After update the stock recovery came back so I flashed again this new one through fastboot, first I booted boot_lisa.img then I flashed it definitely from inside recovery using the zip file.
At the end I flashed successfully magisk 25.2. I am really impressed with the wonderful work of Dkpost3!

A moment ago
Add bookmark
#125
Excellent recovery. Fully functional. Very good data decryption and OTG. Only the temperature sensor is not working but that's not a big deal. Surely there will be an evolution and it will be fixed. I use MI 11 lite 5g NE (lisa), MIUI 14 global (eea) android 13.

miki1966 said:
A moment ago
Add bookmark
#125
Excellent recovery. Fully functional. Very good data decryption and OTG. Only the temperature sensor is not working but that's not a big deal. Surely there will be an evolution and it will be fixed. I use MI 11 lite 5g NE (lisa), MIUI 14 global (eea) android 13.
Click to expand...
Click to collapse
How do you install it???

quasyl said:
What a wonderful new! Previous version for Android 12 where absolutely perfect, I am sure that this update is, or soon will be also an excellent version.
Thank you very very much!
@Dkpost3 :
I would like to send a little contribution, have you a PayPal account?
Edit: I just installed it on my Lisa running Xiaomi.eu miui 13 weekly version (Android 12): It works perfectly on Android 12, the only limit (it's a beta version) is that it can't read the ext storage. I immediately installed the update to Xiaomi.eu update to miui 14 (14.05) stable without formatting. I don't notice any problem till now.
After update the stock recovery came back so I flashed again this new one through fastboot, first I booted boot_lisa.img then I flashed it definitely from inside recovery using the zip file.
At the end I flashed successfully magisk 25.2. I am really impressed with the wonderful work of Dkpost3!
Click to expand...
Click to collapse
thnks

mohamadreza40 said:
How do you install it???
Click to expand...
Click to collapse
are you having problems?

anyone tried this on MIUI 14 China ROM?

I was almost installing for aosp rom.

Greetings,....thank you very much the twrp sir...working nicely for my phone....i use miui 14 eu and android 13

PaperKing13 said:
anyone tried this on MIUI 14 China ROM?
Click to expand...
Click to collapse
Yes. It works perfectly. I flashed xiaomi.eu rom (based on cn version ) and magisk. I also did a full backup.

I've not been able to download it, but MANY THANKS for your recovery!!
Is there any other place to download it?
yandex complains about the limit of downloads
thanks!

mohamadreza40 said:
How do you install it???
Click to expand...
Click to collapse
First I booted boot_lisa.img then I flashed it definitely from inside recovery using the zip file.

Thank you very much, you did an excellent job I also directly flashed the xiaomi.eu 14.06 zip and the system booted.

miki1966 said:
First I booted boot_lisa.img then I flashed it definitely from inside recovery using the zip file.
Click to expand...
Click to collapse
I don't know how do it ... Can you help me ??

mohamadreza40 said:
I don't know how do it ... Can you help me ??
Click to expand...
Click to collapse
Unlock your bootloader (if it's not already unlocked)
Onstall adb, fastboot and related USB drivers on your PC
Restart your phone in bootloader mode
Open a command line window/terminal emulator on your PC
Change to the adb directory on your PC
Boot TWRP 3.7_012 by running: fastboot boot boot_lisa.img
After TWRP 3.7_012 has booted, check that everything is working, such as that the data partition is mounted correctly and that the touchscreen is working.
Find and select the TWRP 3.7_012 zip on your phone, tap and swipe to install it.
After installation, your phone will automatically reboot into TWRP 3.7_012
Enjoy!

miki1966 said:
Unlock your bootloader (if it's not already unlocked)
Onstall adb, fastboot and related USB drivers on your PC
Restart your phone in bootloader mode
Open a command line window/terminal emulator on your PC
Change to the adb directory on your PC
Boot TWRP 3.7_012 by running: fastboot boot boot_lisa.img
After TWRP 3.7_012 has booted, check that everything is working, such as that the data partition is mounted correctly and that the touchscreen is working.
Find and select the TWRP 3.7_012 zip on your phone, tap and swipe to install it.
After installation, your phone will automatically reboot into TWRP 3.7_012
Enjoy!
Click to expand...
Click to collapse
Thanks my friend

Dkpost3 said:
are you having problems?
Click to expand...
Click to collapse
No just i try it

xabier-bo said:
I've not been able to download it, but MANY THANKS for your recovery!!
Is there any other place to download it?
yandex complains about the limit of downloads
thanks!
Click to expand...
Click to collapse

pls check
CPU temperature * Test Build
Vibration * Test Build
SD-CARD ** Test Build