{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This thread is for the INTERNATIONAL S10e / S10 / S10+, SM-G97xF, only!!!
Continuously "asking" "where's the UPDATE.ZIP" is NOT DONE!
Be aware, it's NOT very easy to pull the UPDATE.ZIP, and is done by persons in their free time! ( i.e. Cyber John )
If you "can't wait" for the UPDATE.ZIP, pull it yourself and post it here!
Samsung is starting a Beta-program Android 10/OneUI 2 for the S10-series. In this thread, we'll post the UPDATE.ZIP files (when available).
REMEMBER: don't install these files if you want to have a STABLE phone! As this is a BETA, it's possible the firmware isn't BUG-free!
The UPDATE.ZIP files are pulled from a GERMAN (DBT)-device; be sure your device is on the G97xFXXS3ASII build! (Radio/CP & CSC must be on ASIE) -> Link can be found HERE
The UPDATE.ZIP can be installed on devices with the following CSC's:
SM-G975F OXM multi CSC ( ACR AFG AFR ATO AUT BGL BNG BRI CAC CAM CAU CHO COO DBT DKR ECT EGY EON EUR ILO INS ITV KSA LAO LUX MID MWD MXO MYM NEE NPL ORX PAK PEO PHE PHN ROM SEB SEE SEK SKZ SLK SMP THL THR TPA TPH TTT TUN TUR XEF XEH XEO XEU XEZ XFE XME XSG XSP XTC XXV )
single : ( BTC BTU CPW DOO EMP GLB GTO LYS MAT MM1 NZC OPS SER SIN SIO SMA STH TEB TEL TMC TNZ VAU VNZ WTL XFA XFV XNZ XSA )
How to install the UPDATE.ZIP to your S10 (by @madvinegar ); YouTube-video by SStech
ADB-method:
1. Download SDK platform tools from here https://developer.android.com/studio/releases/platform-tools
2. Extract them on your desktop.
3. Inside the extracted folder put the update.zip
4. Inside this folder, holding left shift, right click the mouse and select "open command prompt here". The command prompt will open.
5. Shutdown the phone.
6. Holding power+bixby+volume up buttons, enter into recovery mode.
7. Select "update via ADB". (you scroll down using the volume buttons and select using the power button).
8. Connect the phone to the PC using original samsung USB cable.
9. In the command prompt run the following command:
./adb devices
10. Wait to see that the daemon has started and that your device is found.
11. If you device is found, run the following command:
./adb sideload update.zip
The update process will start. You will see a percentage counting. First it will verify, then patch etc. Do not move the cable, disconnect the phone or power off the PC.
Once the process is completed (it takes some time) the phone will boot itself, update the apps and log into your home screen.
SD-card method:
1. Download the bin file and rename it to update.zip (by going to file options in win10 you can select to view the file extensions. This makes the renaming process much easier and safer, and avoids renaming the file to update.zip.zip)
2. Copy it to the root directory of your SDcard.
3. Shut down your phone.
4. Hold simultaneously Power+bixby+volume up buttons to get into stock recovery.
5. Using your volume keys navigate to "update via SdCard" and press power button to select it.
6. Again using volume keys navigate to the file "update.zip" and press power button to select it.
7. Update will start. Leave it till it completes. It will take some time.
8. Phone will reboot by itself and load android.
This will not trip KNOX if done by the method i told
NOTE: THESE UPDATE.ZIP's ARE ONLY FOR DEVICES WITH MULTI-CSC OXM!!!
You can check this, to type in your dialer *#1234#, and check if OXM is in the CSC-build...
S10+:
Beta1 (14 Oct) ASII -> ZSJ8: G975F_ASII_ZSJ8
Known BUG: https://forum.xda-developers.com/showpost.php?p=80532611&postcount=161
Beta1 (24 Oct) ASIG -> ZSJF (You must be on the Indian ASIG-build (AP/BL: ASIG, CP/CSC: ASIE)): G975F_ASIG_ZSJF
Beta2 (25 Oct) ZSJ8 -> ZSJF: G975F_ZSJ8_ZSJF
Needs to be installed with the "SD-Card method"!
EMERGENCY UPDATE (29 Oct) ZSJF -> ZSJL: G975F_ZSJF_ZSJL
Beta3 (07 Nov) ZSJL -> ZSK3: G975F_ZSJL_ZSK3
Beta4 (15 Nov) ZSK3 -> ZSK9: G975F_ZSK3_ZSK9
Beta5 (18 Nov) ZSK9 -> ZSKF: G975F_ZSK9_ZSKF (thanks to @Robert Smali)
Beta6 (21 Nov) ZSKF -> ZSKJ: G975F_ZSKF_ZSKJ
Beta7 (25 Nov) ZSKJ -> ZSKL: G975F_ZSKJ_ZSKL (Thanks to SamMobile)
Stable/Final (28 Nov) ZSKL -> BSKO: G975F_ZSKL_BSKO
S10:
Beta1 (14 Oct) ASII -> ZSJ8: G973F_ASII_ZSJ8
Known BUG: https://forum.xda-developers.com/showpost.php?p=80532611&postcount=161
Beta2 (25 Oct) ZSJ8 -> ZSJF: G973F_ZSJ8_ZSJF
Needs to be installed with the "SD-Card method"!
EMERGENCY UPDATE (29 Oct) ZSJF -> ZSJL: G973F_ZSJF_ZSJL
Beta3 (07 Nov) ZSJL -> ZSK3: G973F_ZSJL_ZSK3
Beta4 (15 Nov) ZSK3 -> ZSK9: G973F_ZSK3_ZSK9 (thanks to @runtime_Err0r)
Beta5 (18 Nov) ZSK9 -> ZSKF: G973F_ZSK9_ZSKF (thanks to @runtime_Err0r)
Beta6 (21 Nov) ZSKF -> ZSKJ: G973F_ZSKF_ZSKJ
Beta7 (25 Nov) ZSKJ -> ZSKL: G973F_ZSKJ_ZSKL (thanks to @runtime_Err0r)
Stable/Final (28 Nov) ZSKL -> BSKO: G973F_ZSKL_BSKO
S10e:
Beta1 (14 Oct) ASII -> ZSJ8: G970F_ASII_ZSJ8
Known BUG: https://forum.xda-developers.com/showpost.php?p=80532611&postcount=161
Beta2 (25 Oct) ZSJ8 -> ZSJF: G970F_ZSJ8_ZSJF
Needs to be installed with the "SD-Card method"!
EMERGENCY UPDATE (29 Oct) ZSJF -> ZSJL: G970F_ZSJF_ZSJL
Beta3 (07 Nov) ZSJL -> ZSK3: G970F_ZSJL_ZSK3
Beta4 (15 Nov) ZSK3 -> ZSK9: G970F_ZSK3_ZSK9
Beta5 (18 Nov) ZSK9 -> ZSKF: G970F_ZSK9_ZSKF (thanks to @Robert Smali)
Beta6 (21 Nov) ZSKF -> ZSKJ: G970F_ZSKF_ZSKJ
Beta7 (25 Nov) ZSKJ -> ZSKL: G970F_ZSKJ_ZSKL (Thanks to SamMobile)
Stable/Final (28 Nov) ZSKL -> BSKO: G970F_ZSKL_BSKO
RENAME THE FILE TO update.zip
NOTE: after installing the update, CLEAR your cache by going into recovery (VolUP - Bixby - Power)
If you want to run the BETA-firmware flawlessly, do a FACTORY-reset afterwards... (not necessary, but... )
UPDATING to Beta is your own choice, and I don't take responsibility if something is going wrong!
If you're NOT officially registered, you WON'T receive OTA: you'll have to update everytime MANUALLY with above method!!!
If you want to DOWNGRADE back to Pie: download the latest Pie-firmware for your own CSC, flash AP BL CP & CSC_OXM -> your device will reset afterwards which is mandatory!
henklbr said:
In this thread, we'll post the UPDATE.ZIP files (when available).
Click to expand...
Click to collapse
Glad to find you again on these subforums mate! :victory:
Felt the need to thank you and all the guys making beta updates possible worldwide!
Regards
@henklbr thanks we are all counting on you!!!
Beta has been delayed.
https://www.sammobile.com/news/galaxy-s10-one-ui-2-0-beta-delayed/
iamnotkurtcobain said:
Beta has been delayed.
https://www.sammobile.com/news/galaxy-s10-one-ui-2-0-beta-delayed/
Click to expand...
Click to collapse
Idk what to say... Someone at phonearena is probably already running on beta 1
https://www.facebook.com/PhoneArena/photos/a.10150238082179598/10157512410184598/?type=3&__tn__=-R
corsicanu said:
Idk what to say... Someone at phonearena is probably already running on beta 1
https://www.facebook.com/PhoneArena/photos/a.10150238082179598/10157512410184598/?type=3&__tn__=-R
Click to expand...
Click to collapse
Wow...
Hi, I know it's not on the compatible list but I have this feeling that it might be compatible.
G975FXXU3ASIG
CSC G975FOWO3ASIG
G975F/DS
Thanks
rmarcus said:
Hi, I know it's not on the compatible list but I have this feeling that it might be compatible.
G975FXXU3ASIG
CSC G975FOWO3ASIG
G975F/DS
Thanks
Click to expand...
Click to collapse
Read the first post...
No: it's NOT compatible!
corsicanu said:
Idk what to say... Someone at phonearena is probably already running on beta 1
https://www.facebook.com/PhoneArena/photos/a.10150238082179598/10157512410184598/?type=3&__tn__=-R
Click to expand...
Click to collapse
We saw this too at SamMobile; we asked PhoneArena for more info: NO reaction at all!
No-one at our office has the possibility to install the update yet, neither are people from the German Samsung community!
henklbr said:
We saw this too at SamMobile; we asked PhoneArena for more info: NO reaction at all!
No-one at our office has the possibility to install the update yet, neither are people from the German Samsung community!
Click to expand...
Click to collapse
I'm aware of the fact they are the only one to come with this and 0 useful information attached, but the "Update: We reached out to Samsung and the company confirmed to us that the beta program has indeed been delayed. No new date has been provided yet." is doubtful too imho since this was posted on Samsung forums, furtherly thinking at this picture being posted more recently than the korean delay announcement.
Don't get me wrong, i'm not trying to start a riot or something, i just still think and hope they will deliver beta today at some point in Germany.
All the best!
corsicanu said:
I'm aware of the fact they are the only one to come with this and 0 useful information attached, but the "Update: We reached out to Samsung and the company confirmed to us that the beta program has indeed been delayed. No new date has been provided yet." is doubtful too imho since this was posted on Samsung forums, furtherly thinking at this picture being posted more recently than the korean delay announcement.
Don't get me wrong, i'm not trying to start a riot or something, i just still think and hope they will deliver beta today at some point in Germany.
All the best!
Click to expand...
Click to collapse
I'm afraid the Beta has indeed been delayed, because we (SamMobile) got the news from Samsung Korea...
henklbr said:
I'm afraid the Beta has indeed been delayed, because we (SamMobile) got the news from Samsung Korea...
Click to expand...
Click to collapse
Did they mention at any point worldwide beta was delayed or only korean? I'm trying to understand why did Samsung Germany posted those things while it was already conclusioned as delayed..
corsicanu said:
Did they mention at any point worldwide beta was delayed or only korean? I'm trying to understand why did Samsung Germany posted those things while it was already conclusioned as delayed..
Click to expand...
Click to collapse
No: they did not...
So: have a little more patience, that's all we can say...
So only those with the October security patch could use the update.zip?
Monigote97 said:
So only those with the October security patch could use the update.zip?
Click to expand...
Click to collapse
Yes, and multi csc oxm
henklbr said:
No: they did not...
So: have a little more patience, that's all we can say...
Click to expand...
Click to collapse
Speaking of phonearena, they were probably working on this:
https://www.phonearena.com/news/And...0-Hands-on-with-all-the-new-features_id119559
Now we know
Hi OP. Have you captured the update URL? If you have, Can you please share the URL so other people can also try to pull the update!
kazim.asghar said:
Hi OP. Have you captured the update URL? If you have, Can you please share the URL so other people can also try to pull the update!
Click to expand...
Click to collapse
Read the 2nd Paragraph of message #1:
Continuously "asking" "where's the UPDATE.ZIP" is NOT DONE!
Be aware, it's NOT very easy to pull the UPDATE.ZIP, and is done by persons in their free time! ( i.e. @CyberJ0hn )
If you "can't wait" for the UPDATE.ZIP, pull it yourself and post it here!
There is NO URL yet! When it's available, you can find it in this thread (maybe)...
I don't really get your reasoning on creating this thread.
You create a full readme on how to update and which devices but without the actual download and then you refrain people asking for updates. This is basically calling these questions upon yourself.
Even worse, you act like some community manager that has to handle thousands of requests day by day by your impolite responses. What did you actually expect what would happen?
Nevertheless, nice guide. Can't wait till beta releases for our devices!
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This thread is for the INTERNATIONAL Note10+, SM-N975F, only!!!
Continuously "asking" "where's the UPDATE.ZIP" is NOT DONE!
Be aware, it's NOT very easy to pull the UPDATE.ZIP, and is done by persons in their free time! ( i.e. Cyber John )
If you "can't wait" for the UPDATE.ZIP, pull it yourself and post it here!
Samsung is starting a Beta-program Android 10/OneUI 2 for the Note10-series. In this thread, we'll post the UPDATE.ZIP files (when available).
REMEMBER: don't install these files if you want to have a STABLE phone! As this is a BETA, it's possible the firmware isn't BUG-free!
The UPDATE.ZIP files are pulled from a GERMAN (DBT)-device; be sure your device is on the N975FXXU1ASJ2 build! (Radio/CP & CSC must be on: ASIC (Radio/CP) & ASJ2 (CSC))
The UPDATE.ZIP can be installed on devices with the following CSC's:
SM-N975F OXM multi-CSC:
ACR AFG AFR ARO ATO AUT BGL BNG BTC BTU CAC CAM CAU CHO COO CPW DBT DKR DOO ECT EGY EON EUR FWD GLB GTO ILO INS ITV KSA LAO LUX LYS MID MM1 MWD MXO MYM NEE NPL NZC OPS ORX PAK PEO PHE PHN ROM SEB SEE SEK SER SIN SIO SKZ SLK SMA SMP STH TEL THL TNZ TPA TPH TTT TUN TUR VAU VNZ XEF XEH XEO XEU XEZ XFA XFE XFV XME XFG XNZ XSA XSP XTC XXV
How to install the UPDATE.ZIP to your Note10+ (by @madvinegar ); YouTube-video by SStech
ADB-method:
1. Download SDK platform tools from here https://developer.android.com/studio/releases/platform-tools
2. Extract them on your desktop.
3. Inside the extracted folder put the update.zip
4. Inside this folder, holding left shift, right click the mouse and select "open command prompt here". The command prompt will open.
5. Shutdown the phone.
6. Holding power+bixby+volume up buttons, enter into recovery mode.
7. Select "update via ADB". (you scroll down using the volume buttons and select using the power button).
8. Connect the phone to the PC using original samsung USB cable.
9. In the command prompt run the following command:
./adb devices
10. Wait to see that the daemon has started and that your device is found.
11. If you device is found, run the following command:
./adb sideload update.zip
The update process will start. You will see a percentage counting. First it will verify, then patch etc. Do not move the cable, disconnect the phone or power off the PC.
Once the process is completed (it takes some time) the phone will boot itself, update the apps and log into your home screen.
SD-card method:
1. Download the bin file and rename it to update.zip (by going to file options in win10 you can select to view the file extensions. This makes the renaming process much easier and safer, and avoids renaming the file to update.zip.zip)
2. Copy it to the root directory of your SDcard.
3. Shut down your phone.
4. Hold simultaneously Power+bixby+volume up buttons to get into stock recovery.
5. Using your volume keys navigate to "update via SdCard" and press power button to select it.
6. Again using volume keys navigate to the file "update.zip" and press power button to select it.
7. Update will start. Leave it till it completes. It will take some time.
8. Phone will reboot by itself and load android.
This will not trip KNOX if done by the method i told
NOTE: THESE UPDATE.ZIP's ARE ONLY FOR DEVICES WITH MULTI-CSC OXM!!!
You can check this, to type in your dialer *#1234#, and check if OXM is in the CSC-build...
Note10+:
Beta1 (28 Oct) ASJ2 -> ZSJF : N975F_ASJ2_ZSJF
You need to be at this build: AP : N975FXXS1ASJ2 - CP : N975FXXS1ASIC - CSC : N975FOXM1ASJ2
Beta1 (08 Nov) ASJG -> ZSK4 : N975F_ASJG_ZSK4 (thanks to @dr.ketan)
You need to be at this build: AP : N975FXXS1ASJG - CP : N975FXXS1ASJ2 - CSC : N975FOXM1ASJ2
Beta1 (14 Nov) ASJM -> ZSK4 : N975F_ASJM_ZSK4 (thanks to SamMobile)
You need to be at this build: AP : N975FXXS1ASJM - CP : N975FXXS1ASJ4 - CSC : N975FOXM1ASJC
Beta2 (18 Nov) ZSK4 -> ZSK8 : N975F_ZSK4_ZSK8 (thanks to @dr.ketan)
Beta2 (18 Nov) ZSJF -> ZSK8 : N975F_ZSJF_ZSK8 INSTALL VIA SD-CARD METHOD!
Beta3 (29 Nov) ZSK8 -> ZSKN : N975F_ZSK8_ZSKN (Thanks to GalaxyClub)
Beta4 (06 Dec) ZSKN -> ZSL4 : N975F_ZSKN_ZSL4 (Thanks to GalaxyClub)
Beta5 (11 Dec) ZSL4 -> ZSL7 : N975F_ZSL4_ZSL7 (Thanks to SamMobile)
Stable (13 Dec) ZSL7 -> BSL7 : N975F_ZSL7_BSL7 (Thanks to Cyber John )
Note10:
Beta1 (28 Oct) ASJ2 -> ZSJF : N970F_ASJ2_ZSJF
Beta2 (18 Nov) ZSJF -> ZSK8 : N970F_ZSJF_ZSK8 INSTALL VIA SD-CARD METHOD!
Beta3 (29 Nov) ZSK8 -> ZSKN : N970F_ZSJ8_ZSKN (Thanks to SamMobile)
Beta4 (06 Dec) ZSKN -> ZSL4 : N970F_ZSKN_ZSL4 (Thanks to SamMobile)
Beta5 (11 Dec) ZSL4 -> ZSL7 : N970F_ZSL4_ZSL7 (Thanks to Cyber John )
Stable (13 Dec) ZSL7 -> BSL7 : N970F_ZSL7_BSL7 (Thanks to Cyber John )
RENAME THE FILE TO update.zip
NOTE: after installing the update, CLEAR your cache by going into recovery (VolUP - Power)
If you want to run the BETA-firmware flawlessly, do a FACTORY-reset afterwards... (not necessary, but... )
UPDATING to Beta is your own choice, and I don't take responsibility if something is going wrong!
If you're NOT officially registered, you WON'T receive OTA: you'll have to update everytime MANUALLY with above method!!!
If you want to DOWNGRADE back to Pie: download the latest Pie-firmware for your own CSC, flash AP BL CP & CSC_OXM -> your device will reset afterwards which is mandatory!
In previous BETA releases being able to connect devices such as your watch has been very hit and miss.
There was a thread somewhere about Android 10 and it not connecting to the Active 2 watch. Just something to keep in mind if you are considering updating to the BETA and have such devices
Note 10 android beta delayed until 24.10, maybe.
"SAMSUNG LIVE CHAT <SAMSUNG LIVE CHAT
MICHAELA YORKS / CHATE ID: 22459678 MICHAELA YORKS / CHATE ID: 22459678
have lost.
14:23
Welcome! small
Wait a minute, it's about to go Los_13: 21 For the Note10 / Note10 + will be the
Beta program expected from
Good day Marcel Racky. My name the 24.10. be empowered. 14:23
1st Michaela Yorks. I like to help
welter! 14:21 Um, let's just say it
on 21.10
14'24, 7
So hello again, here I am
was just kicked c looks like
that now off with the rest of the information When does the rollout start?
to the beta program for note 10 at German time?
and the 10 plus comes the 14:24
tomorrow? if so when does it start?
rollout ?? Because I suspect that belongs to the more up-to-date information
the start is delayed as it stands at 24.10.
the s10 series 14:24
14:22
For this we are not current
It's us Marcel. Unfortunately, information had before ..
we have a connection error, 14:24
We also turn our customers
have lost. Okay, good to know that's too bad
14:23 again delayed"
megatooth said:
Note 10 android beta delayed until 24.10, maybe.
"SAMSUNG LIVE CHAT <SAMSUNG LIVE CHAT
MICHAELA YORKS / CHATE ID: 22459678 MICHAELA YORKS / CHATE ID: 22459678
have lost.
14:23
Welcome! small
Wait a minute, it's about to go Los_13: 21 For the Note10 / Note10 + will be the
Beta program expected from
Good day Marcel Racky. My name the 24.10. be empowered. 14:23
1st Michaela Yorks. I like to help
welter! 14:21 Um, let's just say it
on 21.10
14'24, 7
So hello again, here I am
was just kicked c looks like
that now off with the rest of the information When does the rollout start?
to the beta program for note 10 at German time?
and the 10 plus comes the 14:24
tomorrow? if so when does it start?
rollout ?? Because I suspect that belongs to the more up-to-date information
the start is delayed as it stands at 24.10.
the s10 series 14:24
14:22
For this we are not current
It's us Marcel. Unfortunately, information had before ..
we have a connection error, 14:24
We also turn our customers
have lost. Okay, good to know that's too bad
14:23 again delayed"
Click to expand...
Click to collapse
Yes: was mentioned in my 1st post (1st line)
Wonder if it's to do with the whole fingerprint with screen protector issue that's going on at the minute. Maybe they want to get that in the beta and that's why it's delayed.
Wouldn't flashing the update.zip file directly via the recovery menu work? nor not trip knox? When pie beta was released last year for the note9, flashing the update file directly worked. I remember I was at the airport that time and just couldn't wait to get home to flash it so I did everything there with only a charging port available around.
Sent from my SM-N975F using Tapatalk
annson08 said:
Wouldn't flashing the update.zip file directly via the recovery menu work? nor not trip knox? When pie beta was released last year for the note9, flashing the update file directly worked. I remember I was at the airport that time and just couldn't wait to get home to flash it so I did everything there with only a charging port available around.
Sent from my SM-N975F using Tapatalk
Click to expand...
Click to collapse
We had to flush update.zip via adb on s10 last week.
Anyway, old news, my new n10 is coming Thursday on potential beta day too lol
henklbr said:
6. Holding power+volume up buttons, enter into recovery mode.
Click to expand...
Click to collapse
Note 10 Plus has no Power Button, Probably the Bixby button is meant?
6. Odin v3.13.3 must be on ,connect cable (original) to your phone then holding VOLUME DOWN + VOLUME UP than connect cable in PC USB = enter into recovery mode.
woodchild said:
Note 10 Plus has no Power Button, Probably the Bixby button is meant?
Click to expand...
Click to collapse
How do you Power-ON your Note10 when it's OFF?
megatooth said:
6. Odin v3.13.3 must be on ,connect cable (original) to your phone then holding VOLUME DOWN + VOLUME UP than connect cable in PC USB = enter into recovery mode.
Click to expand...
Click to collapse
You're saying? ? ?
You DON'T go to "recovery mode" when you're doing this (you'll enter in ODIN-mode!)
More specific: odin on, phone off, attach cable to phone, push VOLUME UP + VOLUME DOWN same time, attach cable to usb pc . Voilà!
megatooth said:
More specific: odin on, phone off, attach cable to phone, push VOLUME UP + VOLUME DOWN same time, attach cable to usb pc . Voilà!
Click to expand...
Click to collapse
"My" method is much easier, don't you agree?
henklbr said:
How do you Power-ON your Note10 when it's OFF?
Click to expand...
Click to collapse
Yes, that´s right No Power off Button but Bixby Button is Power On button if device off My Mistake
henklbr said:
"My" method is much easier, don't you agree?
Click to expand...
Click to collapse
Yes. It is. Because "my method" is for flash with odin
Another mistake
megatooth said:
Yes. It is. Because "my method" is for flash with odin
Another mistake
Click to expand...
Click to collapse
"My" method can also be used to flash with Odin:
Choose: Boot to Bootloader
And "what" do you mean with "Another mistake"?
henklbr said:
And "what" do you mean with "Another mistake"?
Click to expand...
Click to collapse
I think he means that in relation to my post # 14. I wrote "My mistake"
henklbr said:
And "what" do you mean with "Another mistake"?
Click to expand...
Click to collapse
My mistake !
NOTICE
When, I say WHEN, the BETA is released today, keep following in mind:
Continuously "asking" "where's the UPDATE.ZIP" is NOT DONE!
Be aware, it's NOT very easy to pull the UPDATE.ZIP, and is done by persons in their free time! ( i.e. Cyber John )
Read message #1: all instructions are there!
Not complying with above results in reporting to the Mod's!
Keep this thread CLEAN!!!
three uk devices are sold unlocked apparently, does this mean i dont need to play around with the csc to get the beta to bite??
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ABOUT THE ROM:
Its based on the stock One UI 2.1 of the Galaxy A51 but adapted to the new binary that came with OneUI 2.5 (Binary 4), so u need to have this last binary to avoid problems
GENERAL FEATURES:
- Animations 0.1x to 10x (in developer options)
- Patched theme store (U can use themes and icons for infinite time)
- Unlock by fingerprint after reboot
- Disabled signature verification
- Disabled flag secure (take screenshots from locked apps)
- Added functional AppLock with fingerprint
- Unlocked OMC/CSC (support to multiple countries)
- Aroma installer support
- Secure Folder fixed
- Ofc debloated
AROMA FEATURES:
- KERNEL selection (Stock/Daunesia)
- Patched VBMETA selection (In case u havent installed it yet)
- Patched PARAM selection (To disable all warnings cuz the bootloader unlocked)
- BLOATWARE selection (U can select some apps/services that u like)
- Third party apps selection (Extra applications that are installed directly on the system)
- Enable or disable Multiwindow Tray (Galaxy Fold Panel)
- And some customization options like hexagonal toggles, remove battery limit to use the flash in the camera . . .
SUPPORTED COUNTRY CODES
If u experience problems, possibly the country code of the latest firmware that u installed from Odin isnt supported
Code:
ACR
AFG
AFR
ARO
ATO
AUT
BGL
BNG
BRI
CAC
CAM
CHO
COO
DBT
DKR
ECT
EGY
EON
ETL
EUR
ILO
INS
ITV
KSA
LAO
LUX
MID
MWD
MYM
NEE
NPL
ORX
PAK
PHE
PHN
ROM
SEB
SEE
SEK
SER
SKZ
SLK
SRR
THL
THR
TKD
TPA
TPH
TTT
TUN
TUR
XEF
XEH
XEO
XEU
XFE
XME
XSG
XSP
XTC
XXV
ZTO
MAT
CEL
WTL
PTR
GLB
TMC
XFE
SIO
XFV
PCL
SMP
ILP
BTU
TEB
FWD
CPW
BTC
STH
SIN
MM1
XFA
SMA
LYS
WHAT CAN I DO IF THE COUNTRY CODE ISNT THERE?
Code:
U should do some extra steps after installing the rom:
The idea is to change ur current country code for one that is supported and that preferably is close to ur country (Not necessarily)
+++++ITS RECOMMENDED TO MAKE A BACKUP OF THE EFS
Okey, with some root explorer open these files as a textfile:
/efs/imei/mps_code.dat
/efs/imei/omcnw_code.dat
/efs/imei/omcnw_code2.dat
Inside is a 3-digit code, just change it to a supported one like "XSG"
Restart and u should no longer have any problems
INSTALLATION:WARNING: Before continuing u should know that ur bootloader must be completely unlocked and have TWRP installed, u can get more info HERE
EXTRA_WARNING: U need Binary 4 for correct operation, if u updated to OneUI 2.5 u already have this binary
Wipe data/cache/dalvik (Although a full formatting is recommended and its necessary if u have ur data encrypted)
Install RefinedUI_A515_BlassGO.zip
Configure the Aroma installer to ur liking
Then install RefinedUI_Dynamic_Finish_Installation.zip
Flash Magisk CANARY (The rom is already pre-rooted but a direct magisk installation is recommended)
Restart and wait for the first boot
Enjoy
CREDITS TO:
@amarullz (Original developer of the Aroma Installer)
@hendramanu (Developer of Daunesia Kernel)
@osm0sis (For his work with dynamic partitions)
THE DOWNLOADS IN THE NEXT POST
DOWNLOADS RefinedUI by BlassGO:
GOOGLE DRIVE
RefinedUI_Dynamic_Finish_Installation:
GOOGLE DRIVE
Magisk Canary:
GOOGLE DRIVE
Extra reserved
Good Jobs! Secure Folder worked and No bug found.. work with latest magisk v21.4. According to me, this rom suitable for daily use.
redymedan said:
Good Jobs! Secure Folder worked and No bug found.. work with latest magisk v21.4
Click to expand...
Click to collapse
Wow great!
redymedan said:
Good Jobs! Secure Folder worked and No bug found.. work with latest magisk v21.4
Click to expand...
Click to collapse
How could u make a video so fast, u amazed me
BlassGO said:
How could u make a video so fast, u amazed me
Click to expand...
Click to collapse
I have talked in PM, I recorded when tested it.. just waiting you publish it Up to now, no problem found everything working good
redymedan said:
I have talked in PM, I recorded when tested it.. just waiting you publish it Up to now, no problem found everything working good
Click to expand...
Click to collapse
Is it working normal?
1. MTP?
2. Proximity Sensor?
3. Ultrawide camera?
azteria2000 said:
Is it working normal?
1. MTP?
2. Proximity Sensor?
3. Ultrawide camera?
Click to expand...
Click to collapse
MTP worked, Ultrawide camera wide worked, Proximity I don't use it..
Bundle of thanks for sharing awesome ROM❤❤❤
@BlassGO
Does this custom rom improves gaming performance ??, I have one more question, has some overclocking for the a51
] this custom rom improves gaming performance ??, I have one more question, has some overclocking for the a51
Hello, this would be a rom stock but without so many applications and more stable with the root and that? In which I have if I delete pre-installed applications, when I restart it stays in bootloop, I hope I explained it well, greetings!
ImperialgamesYT said:
] this custom rom improves gaming performance ??, I have one more question, has some overclocking for the a51
Click to expand...
Click to collapse
ImperialgamesYT said:
] this custom rom improves gaming performance ??, I have one more question, has some overclocking for the a51
Click to expand...
Click to collapse
I havent really tested it in games, but many say it runs very smoothly
Nachopincha said:
Hello, this would be a rom stock but without so many applications and more stable with the root and that? In which I have if I delete pre-installed applications, when I restart it stays in bootloop, I hope I explained it well, greetings!
Click to expand...
Click to collapse
Yeah, its an improved stock to have a better experience, it has extras that u can see in the thread
You
BlassGO said:
View attachment 5191991
ABOUT THE ROM:
Its based on the stock One UI 2.1 of the Galaxy A51 but adapted to the new binary that came with OneUI 2.5 (Binary 4), so u need to have this last binary to avoid problems
GENERAL FEATURES:
- Animations 0.1x to 10x (in developer options)
- Patched theme store (U can use themes and icons for infinite time)
- Unlock by fingerprint after reboot
- Disabled signature verification
- Disabled flag secure (take screenshots from locked apps)
- Added functional AppLock with fingerprint
- Unlocked OMC/CSC (support to multiple countries)
- Aroma installer support
- Secure Folder fixed
- Ofc debloated
AROMA FEATURES:
- KERNEL selection (Stock/Daunesia)
- Patched VBMETA selection (In case u havent installed it yet)
- Patched PARAM selection (To disable all warnings cuz the bootloader unlocked)
- BLOATWARE selection (U can select some apps/services that u like)
- Third party apps selection (Extra applications that are installed directly on the system)
- Enable or disable Multiwindow Tray (Galaxy Fold Panel)
- And some customization options like hexagonal toggles, remove battery limit to use the flash in the camera . . .
SUPPORTED COUNTRY CODES
If u experience problems, possibly the country code of the latest firmware that u installed from Odin isnt supported
Code:
ACR
AFG
AFR
ARO
ATO
AUT
BGL
BNG
BRI
CAC
CAM
CHO
COO
DBT
DKR
ECT
EGY
EON
ETL
EUR
ILO
INS
ITV
KSA
LAO
LUX
MID
MWD
MYM
NEE
NPL
ORX
PAK
PHE
PHN
ROM
SEB
SEE
SEK
SER
SKZ
SLK
SRR
THL
THR
TKD
TPA
TPH
TTT
TUN
TUR
XEF
XEH
XEO
XEU
XFE
XME
XSG
XSP
XTC
XXV
ZTO
MAT
CEL
WTL
PTR
GLB
TMC
XFE
SIO
XFV
PCL
SMP
ILP
BTU
TEB
FWD
CPW
BTC
STH
SIN
MM1
XFA
SMA
LYS
WHAT CAN I DO IF THE COUNTRY CODE ISNT THERE?
Code:
U should do some extra steps after installing the rom:
The idea is to change ur current country code for one that is supported and that preferably is close to ur country (Not necessarily)
+++++ITS RECOMMENDED TO MAKE A BACKUP OF THE EFS
Okey, with some root explorer open these files as a textfile:
/efs/imei/mps_code.dat
/efs/imei/omcnw_code.dat
/efs/imei/omcnw_code2.dat
Inside is a 3-digit code, just change it to a supported one like "XSG"
Restart and u should no longer have any problems
INSTALLATION:WARNING: Before continuing u should know that ur bootloader must be completely unlocked and have TWRP installed, u can get more info HERE
EXTRA_WARNING: U need Binary 4 for correct operation, if u updated to OneUI 2.5 u already have this binary
Wipe data/cache/dalvik (Although a full formatting is recommended and its necessary if u have ur data encrypted)
Install RefinedUI_A515_BlassGO.zip
Configure the Aroma installer to ur liking
Then install RefinedUI_Dynamic_Finish_Installation.zip
Flash Magisk CANARY (The rom is already pre-rooted but a direct magisk installation is recommended)
Restart and wait for the first boot
Enjoy
CREDITS TO:
@amarullz (Original developer of the Aroma Installer)
@hendramanu (Developer of Daunesia Kernel)
@osm0sis (For his work with dynamic partitions)
THE DOWNLOADS IN THE NEXT POST
Click to expand...
Click to collapse
Love all these but I haven't flash a rom before, this one caught my eyes but I will need serious assistant, like how do I back up my app and data faster? How do I fix my device if it goes into boot loop?
Have any one tested the speed of this rom and battery usage? Because my stock ROM battery life is crap and the performance is so horrible, ram always getting occupied, device always getting hot. I just hated the phone. But i want to know if this ROM can help out?
miraclegabriel said:
Love all these but I haven't flash a rom before, this one caught my eyes but I will need serious assistant, like how do I back up my app and data faster? How do I fix my device if it goes into boot loop?
Click to expand...
Click to collapse
miraclegabriel said:
Love all these but I haven't flash a rom before, this one caught my eyes but I will need serious assistant, like how do I back up my app and data faster? How do I fix my device if it goes into boot loop?
Click to expand...
Click to collapse
Hi, with TWRP u can make a backup of data, super, boot, modem, EFS, optics and prism that are the most important (U can only do such a complete backup if u already have twrp installed and u formatted to decrypt data)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ADDED FEATURES [ 1.5 ]
- Newer Base OneUI 2.5
- Heavily Debloated
- Added S Power Planning
- Added High Performance Mode
- Added Storage Booster
- Dual Speaker Mod with improved audio quality
- Enabled Resolution options in Power modes in device care
- Enabled Dolby Atmos without headphones
- Enabled App Drawer clearer contrast
- Flagship launcher animation
- Flagship edge lighting effects
GENERAL FEATURES [ 1.0 ]
- Animations 0.1x to 10x (in developer options)
- Patched theme store (U can use themes and icons for infinite time)
- Unlock by fingerprint after reboot
- Disabled signature verification
- Disabled flag secure (take screenshots from locked apps)
- Added functional AppLock with fingerprint
- Unlocked OMC/CSC (support to multiple countries)
- Aroma installer support
- Secure Folder fixed
AROMA FEATURES [ 1.5 ]
- Only selection for the Bootlogo + Bootanimation of the Galaxy s21 or the stock
AROMA FEATURES [ 1.0 ]
- KERNEL selection (Stock/NDataX)
- Patched VBMETA selection (In case u havent installed it yet)
- Patched PARAM selection (To disable all warnings cuz the bootloader unlocked)
- BLOATWARE selection (U can select some apps/services that u like)
- Third party apps selection (Extra applications that are installed directly on the system)
- Enable or disable Multiwindow Tray (Galaxy Fold Panel)
- And some customization options like hexagonal toggles, remove battery limit to use the flash in the camera . . .
SUPPORTED COUNTRY CODES
If u experience problems, possibly the country code of the latest firmware that u installed from Odin isnt supported
Code:
ACR
AFG
AFR
ARO
ATO
AUT
BGL
BNG
BRI
CAC
CAM
CHO
COO
DBT
DKR
ECT
EGY
EON
ETL
EUR
ILO
INS
ITV
KSA
LAO
LUX
MID
MWD
MYM
NEE
NPL
ORX
PAK
PHE
PHN
ROM
SEB
SEE
SEK
SER
SKZ
SLK
SRR
THL
THR
TKD
TPA
TPH
TTT
TUN
TUR
XEF
XEH
XEO
XEU
XFE
XME
XSG
XSP
XTC
XXV
ZTO
MAT
CEL
WTL
PTR
GLB
TMC
XFE
SIO
XFV
PCL
SMP
ILP
BTU
TEB
FWD
CPW
BTC
STH
SIN
MM1
XFA
SMA
LYS
WHAT CAN I DO IF THE COUNTRY CODE ISNT THERE?
Code:
U should do some extra steps after installing the rom:
The idea is to change ur current country code for one that is supported and that preferably is close to ur country (Not necessarily)
+++++ITS RECOMMENDED TO MAKE A BACKUP OF THE EFS
Okey, with some root explorer open these files as a textfile:
/efs/imei/mps_code.dat
/efs/imei/omcnw_code.dat
/efs/imei/omcnw_code2.dat
Inside is a 3-digit code, just change it to a supported one like "XSG"
Restart and u should no longer have any problems
INSTALLATION:WARNING: Before continuing u should know that ur bootloader must be completely unlocked and have TWRP installed, u can get more info HERE
EXTRA_WARNING: U need Binary 4 for correct operation, if u updated to OneUI 2.5 u already have this binary
Wipe data/cache/dalvik (Although a full formatting is recommended and its necessary if u have ur data encrypted)
Install RefinedUI_A515_V1.5.zip
Configure the Aroma installer to ur liking
Then install RefinedUI_Dynamic_Finish_Installation.zip
Flash Magisk CANARY (The rom is already pre-rooted but a direct magisk installation is recommended)
Restart and wait for the first boot
Enjoy
CREDITS TO:
@amarullz (Original developer of the Aroma Installer)
@hendramanu (Developer of NDataX Kernel)
@osm0sis (For his work with dynamic partitions)
Captain America (He practically updated the project to OneUI 2.5 )
SOURCE CODE:
NDataX source
THE DOWNLOADS & FIXES IN THE NEXT POST
FIXES
To correct the problem with the Google file manager do the following:
Code:
1. Delete /system/priv-app/GoogleDocumentsUIPrebuilt with some root explorer (MiXplorer)
2. Then reboot
3. Now install "Google Documents Ui Fixer.zip" by Magisk (U need some root explorer installed to be able to select it)
4. Ofc reboot
5. Problem fixed, if u still have problems consider formatting completely
Google Documents Ui Fixer
To pass SafetyNet verification ugu:
SafetyNet Patch A51
DOWNLOADS RefinedUI V1.5 by BlassGO & Captain America:
GOOGLE DRIVE
RefinedUI_Dynamic_Finish_Installation:
GOOGLE DRIVE
Magisk Canary:
GOOGLE DRIVE
Extra ++
OneUI 3 when? ))
why almost all mods in v1.5 are from el0xren repo, but no credits for him?
ole your balls
ShaDisNX255 said:
OneUI 3 when? ))
Click to expand...
Click to collapse
When u take it out of the samsung offices lmao
FraSharp said:
why almost all mods in v1.5 are from el0xren repo, but no credits for him?
ole your balls
Click to expand...
Click to collapse
Because all you need is common sense to look at S20 Ultra's floating feature and know what it does ((
ShaDisNX255 said:
Because all you need is common sense to look at S20 Ultra's floating feature and know what it does ()
Click to expand...
Click to collapse
Doubt, you still need knowledge to know atleast what they do or what they even are lol, in ffeature are like tons of lines, and to understand every line is complicated
ShaDisNX255 said:
OneUI 3 when? ))
Click to expand...
Click to collapse
soon dear, shadis
el0xren said:
soon dear, shadis
Click to expand...
Click to collapse
Big big big work, no problem
Ole your balls
FraSharp said:
why almost all mods in v1.5 are from el0xren repo, but no credits for him?
ole your balls
Click to expand...
Click to collapse
I didnt know that guide was used, the optics of this version were made by Captain America and he just confirmed he used the guide of the csc features from el0xren, even so its a guide so its free to use huh
ShaDisNX255 said:
Because all you need is common sense to look at S20 Ultra's floating feature and know what it does ))
Click to expand...
Click to collapse
And well, if he ask me for credits personally Ill give them to him, I dont care, credits for native samsung features lmao (No hate, just kidding)
el0xren said:
Doubt, you still need knowledge to know atleast what they do or what they even are lol, in ffeature are like tons of lines, and to understand every line is complicated
Click to expand...
Click to collapse
Huh I just realized that u are here, do u want credits for ur cscfeatures guide?
BlassGO said:
Huh I just realized that u are here, do u want credits for ur cscfeatures guide?
Click to expand...
Click to collapse
nop
Big up for ALL the effort you put to the work. Honestly I haven't installed the Rom yet. Can you say more on the custom kernel? Is it better than stock?? How is battery life .
Thanks
Thnks for rom.
My phone have imei repair. Patch certification have it. But i install ur rom. İ have u3 binary rom. Can i install ur rom have imei and network problem?
Fatih27 said:
Thnks for rom.
My phone have imei repair. Patch certification have it. But i install ur rom. İ have u3 binary rom. Can i install ur rom have imei and network problem?
Click to expand...
Click to collapse
U need binary 4 and I recommend u not install it, most likely u will lose the imei patch
CapitalZ21 said:
Big up for ALL the effort you put to the work. Honestly I haven't installed the Rom yet. Can you say more on the custom kernel? Is it better than stock?? How is battery life .
Thanks
Click to expand...
Click to collapse
Im not aware of the additions to the kernel, but in general the rom goes smoothly
Thanks for your work mate.
Is this ROM smoother than stock? How smoother?
Someone tried substratum on it?
Thanks again.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
FEATURES [ 2.0 - REMAKE ]
- NDataX replaced with BlueFly (An improved version)
- Mixplorer removed (Problems with Google File Manager)
- Added the option to remove the Magisk App from the /system (Abnormal State)
- The OMC was updated with the fixed version (optics.img)
- A small change in the installation instructions (Magisk Canary before Dynamic Finish Install)
- RefinedUI2.0_Dynamic_Finish_Installation.zip was updated
FEATURES [ 2.0 ]
- Newer Base OneUI 3.0
- NDataX kernel with improvements
- Heavily Debloated
- Signature verification disabled
- Fixed Secure Folder (Stable)
- Flag Secure disabled (Now you can take screenshots on Netflix, Chrome's private mode, and other apps that don't allow it)
- Added Note10/20 & s21 Live Wallpapers natively
- Slightly optimized OneUI animations (default: 0.75x)
- Removed permission check when installing apps (Now there is no need to give access to each app to install third-party apps)
- Added additional functions in the camera without bugs (Profesional video mode....)
- Functional AppLock and Mask App with fingerprint (Lock and Mask Apps)
- Patched theme store (You can use paid infinite time themes / icons)
- Unlocked CSC/OMC (Additional functions activated)
- Added S Power Planning
- Added High Performance Mode
- Added Storage Booster
- Dual Speaker Mod with improved audio quality
- Enabled Dolby Atmos without headphones
- Flagship launcher animation
- 1% Battery Limit (You can use the flash camera with up to 1% battery)
- Some more tweaks
AROMA FEATURES [ 2.0 ]
- Added support to AromaInstaller to post-installation-actions
- Selection for the Bootlogo + Bootanimation of the Galaxy s21 or the stock (without warnings)
- Vulkan selection (Improves fluidity and graphic processing but consumes a little more battery)
- Patched VBMETA A11 selection (In case u havent installed it yet)
- BLOATWARE selection (U can select some apps/services that u like)
- Selection to REMOVE SERVICES directly from the system such as EdgePanels
- Third party apps selection (Extra applications that are installed directly on the system)
SUPPORTED COUNTRY CODES
If u experience problems, possibly the country code of the latest firmware that u installed from Odin isnt supported
Code:
ACR
AFG
AFR
ARO
ATO
AUT
BGL
BNG
BRI
CAC
CAM
CHO
COO
DBT
DKR
ECT
EGY
EON
ETL
EUR
ILO
INS
ITV
KSA
LAO
LUX
MID
MWD
MYM
NEE
NPL
ORX
PAK
PHE
PHN
ROM
SEB
SEE
SEK
SER
SKZ
SLK
SRR
THL
THR
TKD
TPA
TPH
TTT
TUN
TUR
XEF
XEH
XEO
XEU
XFE
XME
XSG
XSP
XTC
XXV
ZTO
MAT
CEL
WTL
PTR
GLB
TMC
XFE
SIO
XFV
PCL
SMP
ILP
BTU
TEB
FWD
CPW
BTC
STH
SIN
MM1
XFA
SMA
LYS
WHAT CAN I DO IF THE COUNTRY CODE ISNT THERE?
This also works to activate Bixby in case the country u installed by Odin isnt compatible
Code:
U should do some extra steps after installing the rom:
The idea is to change ur current country code for one that is supported and that preferably is close to ur country (Not necessarily)
+++++ITS RECOMMENDED TO MAKE A BACKUP OF THE EFS
Okey, with some root explorer open this file as a textfile:
/efs/imei/mps_code.dat
Inside is a 3-digit code, just change it to a supported one like "XSG"
Restart and u should no longer have any problems
INSTALLATION:WARNING: Before continuing u should know that ur bootloader must be completely unlocked and have TWRP installed, u can get more info HERE
EXTRA_WARNING: U need BL tar.md5 file (Bootloader) from OneUI 3.0 firmware Android 11 for correct operation, if u updated to OneUI 3.0 u already have this
Wipe data/cache/dalvik (Although a full formatting is recommended and its necessary if u have ur data encrypted)
Install RefinedUI2.0_A515x_BlassGO.zip
Configure the Aroma installer to ur liking
Then install Magisk CANARY (The rom is already pre-rooted but a direct magisk installation is recommended)
Then install RefinedUI2.0_Dynamic_Finish_Installation.zip
Restart and wait for the first boot
Enjoy
CREDITS TO:
@amarullz (Original developer of the Aroma Installer)
@hendramanu (Developer of NDataX/BlueFly Kernel)
@osm0sis (For his work with dynamic partitions)
Captain America (For promoting previous versions ugu)
@Yillié for giving me access to the BlueFly source lmao
SOURCE CODE:
BlueFly Kernel source code
THE DOWNLOADS, PATCHES & UPDATES IN THE NEXT POST
PATCHES
To pass SafetyNet verification Android 10 & 11 ugu:
SafetyNet Patch A51
RefinedUI UPDATES [2.0]
Install directly from some Recovery (TWRP or Ofox)
Fixed Call Block Menu
Fixed Data Usage menu (FC)
Enabled LTE Only mode
Disabled system alerts
Fingerprint after reboot
Fixed Google Documents Manager
Fixed Magisk Abnormal state
AndroidFileHost
DOWNLOADS RefinedUI V2.0 by BlassGO:
ANDROID FILE HOST
RefinedUI2.0_Dynamic_Finish_Installation:
ANDROID FILE HOST
Magisk Canary:
GOOGLE DRIVE
Extra++
Downloading
Nice, keep it up!
Need to restore to stock, or will grabbing the BL from the official fw files work too?
Coldstream said:
Need to restore to stock, or will grabbing the BL from the official fw files work too?
Click to expand...
Click to collapse
Preferably install all the stock OneUI 3, but in theory the BL is enough
This error occurs whenever I start the phone & Data Used not working in status bar.
Please fix this.
Good Job @BlassGO , liked, I hope we can install it from BL OneUI 2.0
Mohd Masab said:
This error occurs whenever I start the phone & Data Used not working in status bar.
Please fix this.
Click to expand...
Click to collapse
Just ignore it that is normal
do you have the fm radio application installed?
Coldstream said:
Need to restore to stock, or will grabbing the BL from the official fw files work too?
Click to expand...
Click to collapse
Hi there
I decided to go the same way , but haven't tried yet. Can you please confirm that it's working or not?
link to firmware does not work....
Mohd Masab said:
This error occurs whenever I start the phone & Data Used not working in status bar.
Please fix this.
Click to expand...
Click to collapse
Post
Mohd Masab said:
This error occurs whenever I start the phone & Data Used not working in status bar.
Please fix this.
Click to expand...
Click to collapse
The warning is for the NdataX kernel, just ignore it, it doesnt affect anything, about data usage samsung may have removed some parts of the code
diegol 007 said:
do you have the fm radio application installed?
Click to expand...
Click to collapse
No, this version like the previous ones have the radio removed
BlassGO said:
No, this version like the previous ones have the radio removed
Click to expand...
Click to collapse
is there a way to install the fm radio?
Bugs found
1. No secret codes work in dialer
2. Error at every boot due yo kernal
3. Data used bug
4. Dual speaker ??? Cant find anywhere
5. Call blocking mode not working
6. Phone status custom
7. Secure folder works but dont relock
8. Magisk works strange
Rajdeep_uppal said:
Bugs found
1. No secret codes work in dialer
2. Error at every boot due yo kernal
3. Data used bug
4. Dual speaker ??? Cant find anywhere
5. Call blocking mode not working
6. Phone status custom
7. Secure folder works but dont relock
8. Magisk works strange
Click to expand...
Click to collapse
+1
Bundle of thanks for sharing awesome ROM❤
Please add these features:
Call Recorder
Only LTE Mode
Phone status custom to official
Samsung official Kernel (Option in Aroma)
Samsung Secret codes (Option in Aroma)
Bugs:
Dual speaker not working
Error at every boot
Data used in status bar not working
Secure folder works but dont relock
In this thread, You can share and discuss other links of new official stock firmware for the Galaxy Z Fold 3 International (NO CUSTOM ROMs and/or ROOT talk).
How to flash firmware to your phone:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
1. Extract the firmware file (i.e. to folder C:\Odin) ***
2. Download Odin v3.14.4
3. Extract the Odin ZIP file (i.e. to folder C:\Odin)
4. Open Odin
5. Power OFF your Z Fold3
6. Reboot Phone in Download Mode: Hold down "Volume up" and "Volume down" at same time. While holding down, connect the your phone to your PC via USB. Or use the command "adb reboot-bootloader".
7. Wait until you get a blue sign in Odin
8. Add the firmware files to their designated slots (AP in AP, BL in BL, CP in CP, HOME_CSC in CSC). USERDATA stays EMPTY!
10. Click the start button, sit back and wait few minutes for the device to automatically restart.
*** You can find the latest firmware on Post #2
Latest firmware for the Galaxy Z Fold3
CHANGELOG:
• Stability and reliability
Device behavior has been improved.
• Security
The device is protected with improved security.
Click to expand...
Click to collapse
This is the latest ROM for Multi-CSC OXM and can be used for ALL CSC's mentioned in Multi-CSC OXM!
This is an official Samsung ROM so KNOX will not be triggered!
Model SM-F926B
Model name Galaxy Z Fold3
Country Multi-CSC OXM
Version Android 13
Changelist 26203421
Build date 2023-06-1
Security Patch Level 2023-06-01
Multi-CSC OXM
PDA F926BXXU4EWF1
CSC F926BOXM4EWF1
Details for download with Frija:
Unzip the archive and place the files in the designated slots in Odin 3.14.4
HOME_CSC_OXM -> data will stay intact
CSC_OXM -> device will reset to factory settings
Multi-CSC Descriptions
The Asian model (XTC by default) of the Z Fold3 (SM-F926B) will get a Multi-CSC designated as OXM and that is the main focus of this particular thread but others can and will be discussed.
CountryProduct CodeMulti-CSCAfghanistan(AFG)OXMAlbania(AVF)OXMAustralia(XSA)OXMAustralia(OPS)OXMAustralia(TEL)OXMAustralia(VAU)OXMAustria(DRE)OXMAustria(MOB)OXMAustria(MAX)OXMAustria(ATO)OXMBaltic(SEB)OXMBulgaria(BGL)OXMCaucasus Countries(CAU)OXMChile(CHO)OXMCroatia(CRO)OXMCroatia(VIP)OXMCzech Republic(XEZ)OXMCzech Republic(O2C)OXMCzech Republic(TMZ)OXMCzech Republic(VDC)OXMEgypt(EGY)OXMFrance(XEF)OXMFrance(BOG)OXMFrance(FTM)OXMFrance(SFR)OXMGermany(DBT)OXMGermany(DTM)OXMGermany(VD2)OXMGreece(EUR)OXMGreece(COS)OXMGreece(VGR)OXMHungary(XEH)OXMHungary(TMH)OXMIndia(INU)OXMIraq(MID)OXMIreland(TSI)OXMIreland(MET)OXMIreland(3IE)OXMIreland(VDI)OXMIsrael(ILO)OXMItaly(ITV)OXMItaly(HUI)OXMItaly(TIM)OXMItaly(OMN)OXMKazakhstan(SKZ)OXMKenya(AFR)OXMKenya(DKR)OXMLebanon(ILP)OXMLibya(BTC)OXMLuxembourg(LUX)OXMMacedonia(MBM)OXMMalaysia(XME)OXMMorocco(MWD)OXMNepal(NPL)OXMNetherlands(PHN)OXMNetherlands(TNL)OXMNetherlands(VDF)OXMNigeria(ECT)OXMNordic countries(NEE)OXMPakistan(PAK)OXMPanama(TPA)OXMPhilippines(GLB)OXMPhilippines(XTC)OXMPoland(XEO)OXMPoland(OPV)OXMPoland(PLS)OXMPoland(PRT)OXMPoland(TPL)OXMPortugal(MEO)OXMPortugal(TPH)OXMPortugal(TCL)OXMRomania(ROM)OXMRomania(COA)OXMRomania(ORO)OXMRomania(CNX)OXMRussia(SER)OXMSaudi Arabia(KSA)OXMSaudi Arabia(ACR)OXMSerbia(MSR)OXMSerbia(TOP)OXMSingapore(MM1)OXMSingapore(XSP)OXMSingapore(SIN)OXMSingapore(STH)OXMSlovakia(ORX)OXMSlovakia(ORS)OXMSlovakia(TMS)OXMSlovenia(SIO)OXMSlovenia(MOT)OXMSlovenia(SIM)OXMSouth Africa(XFE)OXMSouth Africa(XFA)OXMSouth Africa(XFV)OXMSouth East Europe(SEE)OXMSpain(PHE)OXMSpain(XEC)OXMSpain(AMO)OXMSpain(ATL)OXMSri Lanka(SLK)OXMSweden(HTS)OXMSwitzerland(AUT)OXMSwitzerland(SWC)OXMThailand(THL)OXMThailand(MYM)OXMTrinidad and Tobago(EON)OXMTunisia(TUN)OXMTurkey(TUR)OXMUkraine(SEK)OXMUnited Arab Emirates(LYS)OXMUnited Arab Emirates(XSG)OXMUnited Kingdom(BTU)OXMUnited Kingdom(EVR)OXMUnited Kingdom(H3G)OXMUnited Kingdom(O2U)OXMUnited Kingdom(VOD)OXMUnknown(EUX)OXMUnknown(EUY)OXMUnknown(XNZ)OXMUzbekistan(CAC)OXMVietnam(XXV)OXM
These are the other Multi-CSC types available that may see new updates released at different times:
CountryProduct CodeMulti-CSCArgentina(ANC)OWEChile(CHE)OWECosta Rica(ICE)OWEDominican Republic(DOR)OWEJamaica(CWW)OWEUnknown(BAT)OWE
CountryProduct CodeMulti-CSCArgentina(ARO)OWOArgentina(CTI)OWOArgentina(UFN)OWOArgentina(PSN)OWOBolivia(BVO)OWOBrazil(ZTO)OWOBrazil(ZTA)OWOBrazil(ZTM)OWOBrazil(ZVV)OWOChile(CRC)OWOChile(CHL)OWOChile(CHT)OWOColombia(COL)OWOColombia(COO)OWOColombia(COM)OWOColombia(COB)OWODominican Republic(CDR)OWOEcuador(EBE)OWOEcuador(ECO)OWOGuatemala(PGU)OWOGuatemala(CGU)OWOMexico(IUS)OWOMexico(TMM)OWOMexico(TCE)OWOPanama(CPA)OWOParaguay(UPO)OWOParaguay(PSP)OWOParaguay(TGP)OWOPeru(PET)OWOPeru(PEO)OWOPeru(PNT)OWOPeru(SAM)OWOSouth America(NBS)OWOUnknown(BVT)OWOUnknown(MXO)OWOUruguay(UFU)OWOUruguay(CTU)OWO
Lastly, phones with these product codes do not currently share CSC with different countries:
CountryProduct CodeCSCIndonesia(XID)OLE
RESERVED #3
Very good
annson08 said:
Multi-CSC Descriptions
The Asian model (XTC by default) of the Z Fold3 (SM-F926B) will get a Multi-CSC designated as OXM and that is the main focus of this particular thread but others can and will be discussed.
CountryProduct CodeMulti-CSCAfghanistan(AFG)OXMAlbania(AVF)OXMAustralia(XSA)OXMAustralia(OPS)OXMAustralia(TEL)OXMAustralia(VAU)OXMAustria(DRE)OXMAustria(MOB)OXMAustria(MAX)OXMAustria(ATO)OXMBaltic(SEB)OXMBulgaria(BGL)OXMCaucasus Countries(CAU)OXMChile(CHO)OXMCroatia(CRO)OXMCroatia(VIP)OXMCzech Republic(XEZ)OXMCzech Republic(O2C)OXMCzech Republic(TMZ)OXMCzech Republic(VDC)OXMEgypt(EGY)OXMFrance(XEF)OXMFrance(BOG)OXMFrance(FTM)OXMFrance(SFR)OXMGermany(DBT)OXMGermany(DTM)OXMGermany(VD2)OXMGreece(EUR)OXMGreece(COS)OXMGreece(VGR)OXMHungary(XEH)OXMHungary(TMH)OXMIndia(INU)OXMIraq(MID)OXMIreland(TSI)OXMIreland(MET)OXMIreland(3IE)OXMIreland(VDI)OXMIsrael(ILO)OXMItaly(ITV)OXMItaly(HUI)OXMItaly(TIM)OXMItaly(OMN)OXMKazakhstan(SKZ)OXMKenya(AFR)OXMKenya(DKR)OXMLebanon(ILP)OXMLibya(BTC)OXMLuxembourg(LUX)OXMMacedonia(MBM)OXMMalaysia(XME)OXMMorocco(MWD)OXMNepal(NPL)OXMNetherlands(PHN)OXMNetherlands(TNL)OXMNetherlands(VDF)OXMNigeria(ECT)OXMNordic countries(NEE)OXMPakistan(PAK)OXMPanama(TPA)OXMPhilippines(GLB)OXMPhilippines(XTC)OXMPoland(XEO)OXMPoland(OPV)OXMPoland(PLS)OXMPoland(PRT)OXMPoland(TPL)OXMPortugal(MEO)OXMPortugal(TPH)OXMPortugal(TCL)OXMRomania(ROM)OXMRomania(COA)OXMRomania(ORO)OXMRomania(CNX)OXMRussia(SER)OXMSaudi Arabia(KSA)OXMSaudi Arabia(ACR)OXMSerbia(MSR)OXMSerbia(TOP)OXMSingapore(MM1)OXMSingapore(XSP)OXMSingapore(SIN)OXMSingapore(STH)OXMSlovakia(ORX)OXMSlovakia(ORS)OXMSlovakia(TMS)OXMSlovenia(SIO)OXMSlovenia(MOT)OXMSlovenia(SIM)OXMSouth Africa(XFE)OXMSouth Africa(XFA)OXMSouth Africa(XFV)OXMSouth East Europe(SEE)OXMSpain(PHE)OXMSpain(XEC)OXMSpain(AMO)OXMSpain(ATL)OXMSri Lanka(SLK)OXMSweden(HTS)OXMSwitzerland(AUT)OXMSwitzerland(SWC)OXMThailand(THL)OXMThailand(MYM)OXMTrinidad and Tobago(EON)OXMTunisia(TUN)OXMTurkey(TUR)OXMUkraine(SEK)OXMUnited Arab Emirates(LYS)OXMUnited Arab Emirates(XSG)OXMUnited Kingdom(BTU)OXMUnited Kingdom(EVR)OXMUnited Kingdom(H3G)OXMUnited Kingdom(O2U)OXMUnited Kingdom(VOD)OXMUnknown(XNZ)OXMUzbekistan(CAC)OXMVietnam(XXV)OXM
These are the other Multi-CSC types available that may see new updates released at different times:
CountryProduct CodeMulti-CSCArgentina(ANC)OWEChile(CHE)OWECosta Rica(ICE)OWEDominican Republic(DOR)OWEJamaica(CWW)OWEUnknown(BAT)OWE
CountryProduct CodeMulti-CSCArgentina(ARO)OWOArgentina(CTI)OWOArgentina(UFN)OWOArgentina(PSN)OWOBolivia(BVO)OWOBrazil(ZTO)OWOBrazil(ZTA)OWOBrazil(ZTM)OWOBrazil(ZVV)OWOChile(CRC)OWOChile(CHL)OWOChile(CHT)OWOColombia(COL)OWOColombia(COO)OWOColombia(COM)OWOColombia(COB)OWODominican Republic(CDR)OWOEcuador(EBE)OWOEcuador(ECO)OWOGuatemala(PGU)OWOGuatemala(CGU)OWOMexico(IUS)OWOMexico(TMM)OWOMexico(TCE)OWOPanama(CPA)OWOParaguay(UPO)OWOParaguay(PSP)OWOParaguay(TGP)OWOPeru(PET)OWOPeru(PEO)OWOPeru(PNT)OWOPeru(SAM)OWOSouth America(NBS)OWOUnknown(BVT)OWOUnknown(MXO)OWOUruguay(UFU)OWOUruguay(CTU)OWO
Lastly, phones with these product codes do not currently share CSC with different countries:
CountryProduct CodeCSCIndonesia(XID)OLE
Click to expand...
Click to collapse
The links lead to S21 Ultra Software, not Z Fold3
hkr said:
The links lead to S21 Ultra Software, not Z Fold3
Click to expand...
Click to collapse
Thanks, updating rn.
EDIT: Updated. Please note that not all countries has firmware for them YET so some links will return as "not found".
annson08 said:
In this thread, You can share and discuss other links of new official stock firmware for the Galaxy Z Fold 3 International (NO CUSTOM ROMs and/or ROOT talk).
How to flash firmware to your phone:
View attachment 5498513
1. Extract the firmware file (i.e. to folder C:\Odin) ***
2. Download Odin v3.14.4
3. Extract the Odin ZIP file (i.e. to folder C:\Odin)
4. Open Odin
5. Power OFF your Z Fold3
6. Reboot Phone in Download Mode: Hold down "Volume up" and "Volume down" at same time. While holding down, connect the your phone to your PC via USB. Or use the command "adb reboot-bootloader".
7. Wait until you get a blue sign in Odin
8. Add the firmware files to their designated slots (AP in AP, BL in BL, CP in CP, HOME_CSC in CSC). USERDATA stays EMPTY!
10. Click the start button, sit back and wait few minutes for the device to automatically restart.
*** You can find the latest firmware on Post #2
Click to expand...
Click to collapse
SM-F926B Official Firmware One UI 4 (Android 12) for Bangladesh (BKD) available?
annson08 said:
Multi-CSC Descriptions
The Asian model (XTC by default) of the Z Fold3 (SM-F926B) will get a Multi-CSC designated as OXM and that is the main focus of this particular thread but others can and will be discussed.
CountryProduct CodeMulti-CSCAfghanistan(AFG)OXMAlbania(AVF)OXMAustralia(XSA)OXMAustralia(OPS)OXMAustralia(TEL)OXMAustralia(VAU)OXMAustria(DRE)OXMAustria(MOB)OXMAustria(MAX)OXMAustria(ATO)OXMBaltic(SEB)OXMBulgaria(BGL)OXMCaucasus Countries(CAU)OXMChile(CHO)OXMCroatia(CRO)OXMCroatia(VIP)OXMCzech Republic(XEZ)OXMCzech Republic(O2C)OXMCzech Republic(TMZ)OXMCzech Republic(VDC)OXMEgypt(EGY)OXMFrance(XEF)OXMFrance(BOG)OXMFrance(FTM)OXMFrance(SFR)OXMGermany(DBT)OXMGermany(DTM)OXMGermany(VD2)OXMGreece(EUR)OXMGreece(COS)OXMGreece(VGR)OXMHungary(XEH)OXMHungary(TMH)OXMIndia(INU)OXMIraq(MID)OXMIreland(TSI)OXMIreland(MET)OXMIreland(3IE)OXMIreland(VDI)OXMIsrael(ILO)OXMItaly(ITV)OXMItaly(HUI)OXMItaly(TIM)OXMItaly(OMN)OXMKazakhstan(SKZ)OXMKenya(AFR)OXMKenya(DKR)OXMLebanon(ILP)OXMLibya(BTC)OXMLuxembourg(LUX)OXMMacedonia(MBM)OXMMalaysia(XME)OXMMorocco(MWD)OXMNepal(NPL)OXMNetherlands(PHN)OXMNetherlands(TNL)OXMNetherlands(VDF)OXMNigeria(ECT)OXMNordic countries(NEE)OXMPakistan(PAK)OXMPanama(TPA)OXMPhilippines(GLB)OXMPhilippines(XTC)OXMPoland(XEO)OXMPoland(OPV)OXMPoland(PLS)OXMPoland(PRT)OXMPoland(TPL)OXMPortugal(MEO)OXMPortugal(TPH)OXMPortugal(TCL)OXMRomania(ROM)OXMRomania(COA)OXMRomania(ORO)OXMRomania(CNX)OXMRussia(SER)OXMSaudi Arabia(KSA)OXMSaudi Arabia(ACR)OXMSerbia(MSR)OXMSerbia(TOP)OXMSingapore(MM1)OXMSingapore(XSP)OXMSingapore(SIN)OXMSingapore(STH)OXMSlovakia(ORX)OXMSlovakia(ORS)OXMSlovakia(TMS)OXMSlovenia(SIO)OXMSlovenia(MOT)OXMSlovenia(SIM)OXMSouth Africa(XFE)OXMSouth Africa(XFA)OXMSouth Africa(XFV)OXMSouth East Europe(SEE)OXMSpain(PHE)OXMSpain(XEC)OXMSpain(AMO)OXMSpain(ATL)OXMSri Lanka(SLK)OXMSweden(HTS)OXMSwitzerland(AUT)OXMSwitzerland(SWC)OXMThailand(THL)OXMThailand(MYM)OXMTrinidad and Tobago(EON)OXMTunisia(TUN)OXMTurkey(TUR)OXMUkraine(SEK)OXMUnited Arab Emirates(LYS)OXMUnited Arab Emirates(XSG)OXMUnited Kingdom(BTU)OXMUnited Kingdom(EVR)OXMUnited Kingdom(H3G)OXMUnited Kingdom(O2U)OXMUnited Kingdom(VOD)OXMUnknown(XNZ)OXMUzbekistan(CAC)OXMVietnam(XXV)OXM
These are the other Multi-CSC types available that may see new updates released at different times:
CountryProduct CodeMulti-CSCArgentina(ANC)OWEChile(CHE)OWECosta Rica(ICE)OWEDominican Republic(DOR)OWEJamaica(CWW)OWEUnknown(BAT)OWE
CountryProduct CodeMulti-CSCArgentina(ARO)OWOArgentina(CTI)OWOArgentina(UFN)OWOArgentina(PSN)OWOBolivia(BVO)OWOBrazil(ZTO)OWOBrazil(ZTA)OWOBrazil(ZTM)OWOBrazil(ZVV)OWOChile(CRC)OWOChile(CHL)OWOChile(CHT)OWOColombia(COL)OWOColombia(COO)OWOColombia(COM)OWOColombia(COB)OWODominican Republic(CDR)OWOEcuador(EBE)OWOEcuador(ECO)OWOGuatemala(PGU)OWOGuatemala(CGU)OWOMexico(IUS)OWOMexico(TMM)OWOMexico(TCE)OWOPanama(CPA)OWOParaguay(UPO)OWOParaguay(PSP)OWOParaguay(TGP)OWOPeru(PET)OWOPeru(PEO)OWOPeru(PNT)OWOPeru(SAM)OWOSouth America(NBS)OWOUnknown(BVT)OWOUnknown(MXO)OWOUruguay(UFU)OWOUruguay(CTU)OWO
Lastly, phones with these product codes do not currently share CSC with different countries:
CountryProduct CodeCSCIndonesia(XID)OLE
Click to expand...
Click to collapse
SM-F926B Official Firmware One UI 4 (Android 12) for Bangladesh (BKD) available?
annson08 said:
Latest firmware for the Galaxy Z Fold3
* The Next OTA Update changelog screenshot will be inserted here *
This is the latest ROM for Multi-CSC OXM and can be used for ALL CSC's mentioned in Multi-CSC OXM!
This is an official Samsung ROM so KNOX will not be triggered!
What's new:
* Next Update's changelog will be inserted here *
Model SM-F926B
Model name Galaxy Z Fold3
Country Multi-CSC OXM
Version Android 12
Changelist **
Build date **
Security Patch Level **
Multi-CSC OXM
PDA F926BXXS1BUL6
CSC F926BOXM1BUL5
Details for download with Frija:
View attachment 5498529
Unzip the archive and place the files in the designated slots in Odin 3.14.4
HOME_CSC_OXM -> data will stay intact
CSC_OXM -> device will reset to factory settings
* Software Information Screenshot will be inserted here *
Click to expand...
Click to collapse
SM-F926B Official Firmware One UI 4 (Android 12) for Bangladesh (BKD) available?
shaifullah.ahad said:
SM-F926B Official Firmware One UI 4 (Android 12) for Bangladesh (BKD) available?
Click to expand...
Click to collapse
Sorry as you have asked three times the link has locked and you must try again tomorrow
I have EUX as product code. Will the firmware work?
/CK
Café King said:
I have EUX as product code. Will the firmware work?
/CK
Click to expand...
Click to collapse
yes, just choose HOME CSC.
shaifullah.ahad said:
SM-F926B Official Firmware One UI 4 (Android 12) for Bangladesh (BKD) available?
Click to expand...
Click to collapse
just use HOME CSC, doesn't matter if it's BKD, MSP, EUX, EUR or else.
As long as you have a SM-F926B model, not U model.
annson08 said:
Latest firmware for the Galaxy Z Fold3
* The Next OTA Update changelog screenshot will be inserted here *
This is the latest ROM for Multi-CSC OXM and can be used for ALL CSC's mentioned in Multi-CSC OXM!
This is an official Samsung ROM so KNOX will not be triggered!
What's new:
* Next Update's changelog will be inserted here *
Model SM-F926B
Model name Galaxy Z Fold3
Country Multi-CSC OXM
Version Android 12
Changelist **
Build date **
Security Patch Level **
Multi-CSC OXM
PDA F926BXXS1BUL6
CSC F926BOXM1BUL5
Details for download with Frija:
Unzip the archive and place the files in the designated slots in Odin 3.14.4
HOME_CSC_OXM -> data will stay intact
CSC_OXM -> device will reset to factory settings
* Software Information Screenshot will be inserted here *
Click to expand...
Click to collapse
CSC : XID MSR and XSP are all the same, it gives in Friya some difference bul6 bul5 bul4 or bul 6 bul 4 bul4, but when installed, they are identical from decmeber 1th, with same baseband, build number and all.
I´ve the Fold 3 with DBT Eu Germany, can i flash the Build
SM-F926B_1_20211223115230_4zv7w7a7n9_fac
HOME_CSC_OXM_F926BOXM1BUL5 ?
I´m a little afraid
Gojira-r32 said:
CSC : XID MSR and XSP are all the same, it gives in Friya some difference bul6 bul5 bul4 or bul 6 bul 4 bul4, but when installed, they are identical from decmeber 1th, with same baseband, build number and all.
Click to expand...
Click to collapse
MSR and XSP are the same since they both belong in the same multi-CSC family. XID is different, don't get confused. PDA might be the same but contents may differ a little bit. To avoid getting bugs or errors, if you are going to flash firmware from a different multi-CSC, do not use HOME_CSC (this will result in a factory reset).
ShadowK10 said:
I´ve the Fold 3 with DBT Eu Germany, can i flash the Build
SM-F926B_1_20211223115230_4zv7w7a7n9_fac
HOME_CSC_OXM_F926BOXM1BUL5 ?
I´m a little afraid
Click to expand...
Click to collapse
Yes, as long as your current firmware and the new firmware you downloaded belongs to the same multi-CSC, you can use HOME_CSC.
i always use HOME csc
annson08 said:
MSR and XSP are the same since they both belong in the same multi-CSC family. XID is different, don't get confused. PDA might be the same but contents may differ a little bit. To avoid getting bugs or errors, if you are going to flash firmware from a different multi-CSC, do not use HOME_CSC (this will result in a factory reset).
Yes, as long as your current firmware and the new firmware you downloaded belongs to the same multi-CSC, you can use HOME_CSC.
Click to expand...
Click to collapse
Will this wipe the data on my phone？
fripSide-NY said:
Will this wipe the data on my phone？
Click to expand...
Click to collapse
That depends if you are flashing to a different multi-CSC.
If you are flashing to a different multi-CSC then you are required to use CSC instead of HOME_CSC. But if you're flashing to the same multi-CSC, then you just have to use HOME_CSC.
annson08 said:
HOME_CSC_OXM -> data will stay intact
CSC_OXM -> device will reset to factory settings
Click to expand...
Click to collapse