{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This thread is for the INTERNATIONAL Note10+, SM-N975F, only!!!
Continuously "asking" "where's the UPDATE.ZIP" is NOT DONE!
Be aware, it's NOT very easy to pull the UPDATE.ZIP, and is done by persons in their free time! ( i.e. Cyber John )
If you "can't wait" for the UPDATE.ZIP, pull it yourself and post it here!
Samsung is starting a Beta-program Android 10/OneUI 2 for the Note10-series. In this thread, we'll post the UPDATE.ZIP files (when available).
REMEMBER: don't install these files if you want to have a STABLE phone! As this is a BETA, it's possible the firmware isn't BUG-free!
The UPDATE.ZIP files are pulled from a GERMAN (DBT)-device; be sure your device is on the N975FXXU1ASJ2 build! (Radio/CP & CSC must be on: ASIC (Radio/CP) & ASJ2 (CSC))
The UPDATE.ZIP can be installed on devices with the following CSC's:
SM-N975F OXM multi-CSC:
ACR AFG AFR ARO ATO AUT BGL BNG BTC BTU CAC CAM CAU CHO COO CPW DBT DKR DOO ECT EGY EON EUR FWD GLB GTO ILO INS ITV KSA LAO LUX LYS MID MM1 MWD MXO MYM NEE NPL NZC OPS ORX PAK PEO PHE PHN ROM SEB SEE SEK SER SIN SIO SKZ SLK SMA SMP STH TEL THL TNZ TPA TPH TTT TUN TUR VAU VNZ XEF XEH XEO XEU XEZ XFA XFE XFV XME XFG XNZ XSA XSP XTC XXV
How to install the UPDATE.ZIP to your Note10+ (by @madvinegar ); YouTube-video by SStech
ADB-method:
1. Download SDK platform tools from here https://developer.android.com/studio/releases/platform-tools
2. Extract them on your desktop.
3. Inside the extracted folder put the update.zip
4. Inside this folder, holding left shift, right click the mouse and select "open command prompt here". The command prompt will open.
5. Shutdown the phone.
6. Holding power+bixby+volume up buttons, enter into recovery mode.
7. Select "update via ADB". (you scroll down using the volume buttons and select using the power button).
8. Connect the phone to the PC using original samsung USB cable.
9. In the command prompt run the following command:
./adb devices
10. Wait to see that the daemon has started and that your device is found.
11. If you device is found, run the following command:
./adb sideload update.zip
The update process will start. You will see a percentage counting. First it will verify, then patch etc. Do not move the cable, disconnect the phone or power off the PC.
Once the process is completed (it takes some time) the phone will boot itself, update the apps and log into your home screen.
SD-card method:
1. Download the bin file and rename it to update.zip (by going to file options in win10 you can select to view the file extensions. This makes the renaming process much easier and safer, and avoids renaming the file to update.zip.zip)
2. Copy it to the root directory of your SDcard.
3. Shut down your phone.
4. Hold simultaneously Power+bixby+volume up buttons to get into stock recovery.
5. Using your volume keys navigate to "update via SdCard" and press power button to select it.
6. Again using volume keys navigate to the file "update.zip" and press power button to select it.
7. Update will start. Leave it till it completes. It will take some time.
8. Phone will reboot by itself and load android.
This will not trip KNOX if done by the method i told
NOTE: THESE UPDATE.ZIP's ARE ONLY FOR DEVICES WITH MULTI-CSC OXM!!!
You can check this, to type in your dialer *#1234#, and check if OXM is in the CSC-build...
Note10+:
Beta1 (28 Oct) ASJ2 -> ZSJF : N975F_ASJ2_ZSJF
You need to be at this build: AP : N975FXXS1ASJ2 - CP : N975FXXS1ASIC - CSC : N975FOXM1ASJ2
Beta1 (08 Nov) ASJG -> ZSK4 : N975F_ASJG_ZSK4 (thanks to @dr.ketan)
You need to be at this build: AP : N975FXXS1ASJG - CP : N975FXXS1ASJ2 - CSC : N975FOXM1ASJ2
Beta1 (14 Nov) ASJM -> ZSK4 : N975F_ASJM_ZSK4 (thanks to SamMobile)
You need to be at this build: AP : N975FXXS1ASJM - CP : N975FXXS1ASJ4 - CSC : N975FOXM1ASJC
Beta2 (18 Nov) ZSK4 -> ZSK8 : N975F_ZSK4_ZSK8 (thanks to @dr.ketan)
Beta2 (18 Nov) ZSJF -> ZSK8 : N975F_ZSJF_ZSK8 INSTALL VIA SD-CARD METHOD!
Beta3 (29 Nov) ZSK8 -> ZSKN : N975F_ZSK8_ZSKN (Thanks to GalaxyClub)
Beta4 (06 Dec) ZSKN -> ZSL4 : N975F_ZSKN_ZSL4 (Thanks to GalaxyClub)
Beta5 (11 Dec) ZSL4 -> ZSL7 : N975F_ZSL4_ZSL7 (Thanks to SamMobile)
Stable (13 Dec) ZSL7 -> BSL7 : N975F_ZSL7_BSL7 (Thanks to Cyber John )
Note10:
Beta1 (28 Oct) ASJ2 -> ZSJF : N970F_ASJ2_ZSJF
Beta2 (18 Nov) ZSJF -> ZSK8 : N970F_ZSJF_ZSK8 INSTALL VIA SD-CARD METHOD!
Beta3 (29 Nov) ZSK8 -> ZSKN : N970F_ZSJ8_ZSKN (Thanks to SamMobile)
Beta4 (06 Dec) ZSKN -> ZSL4 : N970F_ZSKN_ZSL4 (Thanks to SamMobile)
Beta5 (11 Dec) ZSL4 -> ZSL7 : N970F_ZSL4_ZSL7 (Thanks to Cyber John )
Stable (13 Dec) ZSL7 -> BSL7 : N970F_ZSL7_BSL7 (Thanks to Cyber John )
RENAME THE FILE TO update.zip
NOTE: after installing the update, CLEAR your cache by going into recovery (VolUP - Power)
If you want to run the BETA-firmware flawlessly, do a FACTORY-reset afterwards... (not necessary, but... )
UPDATING to Beta is your own choice, and I don't take responsibility if something is going wrong!
If you're NOT officially registered, you WON'T receive OTA: you'll have to update everytime MANUALLY with above method!!!
If you want to DOWNGRADE back to Pie: download the latest Pie-firmware for your own CSC, flash AP BL CP & CSC_OXM -> your device will reset afterwards which is mandatory!
In previous BETA releases being able to connect devices such as your watch has been very hit and miss.
There was a thread somewhere about Android 10 and it not connecting to the Active 2 watch. Just something to keep in mind if you are considering updating to the BETA and have such devices
Note 10 android beta delayed until 24.10, maybe.
"SAMSUNG LIVE CHAT <SAMSUNG LIVE CHAT
MICHAELA YORKS / CHATE ID: 22459678 MICHAELA YORKS / CHATE ID: 22459678
have lost.
14:23
Welcome! small
Wait a minute, it's about to go Los_13: 21 For the Note10 / Note10 + will be the
Beta program expected from
Good day Marcel Racky. My name the 24.10. be empowered. 14:23
1st Michaela Yorks. I like to help
welter! 14:21 Um, let's just say it
on 21.10
14'24, 7
So hello again, here I am
was just kicked c looks like
that now off with the rest of the information When does the rollout start?
to the beta program for note 10 at German time?
and the 10 plus comes the 14:24
tomorrow? if so when does it start?
rollout ?? Because I suspect that belongs to the more up-to-date information
the start is delayed as it stands at 24.10.
the s10 series 14:24
14:22
For this we are not current
It's us Marcel. Unfortunately, information had before ..
we have a connection error, 14:24
We also turn our customers
have lost. Okay, good to know that's too bad
14:23 again delayed"
megatooth said:
Note 10 android beta delayed until 24.10, maybe.
"SAMSUNG LIVE CHAT <SAMSUNG LIVE CHAT
MICHAELA YORKS / CHATE ID: 22459678 MICHAELA YORKS / CHATE ID: 22459678
have lost.
14:23
Welcome! small
Wait a minute, it's about to go Los_13: 21 For the Note10 / Note10 + will be the
Beta program expected from
Good day Marcel Racky. My name the 24.10. be empowered. 14:23
1st Michaela Yorks. I like to help
welter! 14:21 Um, let's just say it
on 21.10
14'24, 7
So hello again, here I am
was just kicked c looks like
that now off with the rest of the information When does the rollout start?
to the beta program for note 10 at German time?
and the 10 plus comes the 14:24
tomorrow? if so when does it start?
rollout ?? Because I suspect that belongs to the more up-to-date information
the start is delayed as it stands at 24.10.
the s10 series 14:24
14:22
For this we are not current
It's us Marcel. Unfortunately, information had before ..
we have a connection error, 14:24
We also turn our customers
have lost. Okay, good to know that's too bad
14:23 again delayed"
Click to expand...
Click to collapse
Yes: was mentioned in my 1st post (1st line)
Wonder if it's to do with the whole fingerprint with screen protector issue that's going on at the minute. Maybe they want to get that in the beta and that's why it's delayed.
Wouldn't flashing the update.zip file directly via the recovery menu work? nor not trip knox? When pie beta was released last year for the note9, flashing the update file directly worked. I remember I was at the airport that time and just couldn't wait to get home to flash it so I did everything there with only a charging port available around.
Sent from my SM-N975F using Tapatalk
annson08 said:
Wouldn't flashing the update.zip file directly via the recovery menu work? nor not trip knox? When pie beta was released last year for the note9, flashing the update file directly worked. I remember I was at the airport that time and just couldn't wait to get home to flash it so I did everything there with only a charging port available around.
Sent from my SM-N975F using Tapatalk
Click to expand...
Click to collapse
We had to flush update.zip via adb on s10 last week.
Anyway, old news, my new n10 is coming Thursday on potential beta day too lol
henklbr said:
6. Holding power+volume up buttons, enter into recovery mode.
Click to expand...
Click to collapse
Note 10 Plus has no Power Button, Probably the Bixby button is meant?
6. Odin v3.13.3 must be on ,connect cable (original) to your phone then holding VOLUME DOWN + VOLUME UP than connect cable in PC USB = enter into recovery mode.
woodchild said:
Note 10 Plus has no Power Button, Probably the Bixby button is meant?
Click to expand...
Click to collapse
How do you Power-ON your Note10 when it's OFF?
megatooth said:
6. Odin v3.13.3 must be on ,connect cable (original) to your phone then holding VOLUME DOWN + VOLUME UP than connect cable in PC USB = enter into recovery mode.
Click to expand...
Click to collapse
You're saying? ? ?
You DON'T go to "recovery mode" when you're doing this (you'll enter in ODIN-mode!)
More specific: odin on, phone off, attach cable to phone, push VOLUME UP + VOLUME DOWN same time, attach cable to usb pc . Voilà!
megatooth said:
More specific: odin on, phone off, attach cable to phone, push VOLUME UP + VOLUME DOWN same time, attach cable to usb pc . Voilà!
Click to expand...
Click to collapse
"My" method is much easier, don't you agree?
henklbr said:
How do you Power-ON your Note10 when it's OFF?
Click to expand...
Click to collapse
Yes, that´s right No Power off Button but Bixby Button is Power On button if device off My Mistake
henklbr said:
"My" method is much easier, don't you agree?
Click to expand...
Click to collapse
Yes. It is. Because "my method" is for flash with odin
Another mistake
megatooth said:
Yes. It is. Because "my method" is for flash with odin
Another mistake
Click to expand...
Click to collapse
"My" method can also be used to flash with Odin:
Choose: Boot to Bootloader
And "what" do you mean with "Another mistake"?
henklbr said:
And "what" do you mean with "Another mistake"?
Click to expand...
Click to collapse
I think he means that in relation to my post # 14. I wrote "My mistake"
henklbr said:
And "what" do you mean with "Another mistake"?
Click to expand...
Click to collapse
My mistake !
NOTICE
When, I say WHEN, the BETA is released today, keep following in mind:
Continuously "asking" "where's the UPDATE.ZIP" is NOT DONE!
Be aware, it's NOT very easy to pull the UPDATE.ZIP, and is done by persons in their free time! ( i.e. Cyber John )
Read message #1: all instructions are there!
Not complying with above results in reporting to the Mod's!
Keep this thread CLEAN!!!
three uk devices are sold unlocked apparently, does this mean i dont need to play around with the csc to get the beta to bite??
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This thread is for the INTERNATIONAL S10e / S10 / S10+, SM-G97xF, only!!!
Continuously "asking" "where's the UPDATE.ZIP" is NOT DONE!
Be aware, it's NOT very easy to pull the UPDATE.ZIP, and is done by persons in their free time! ( i.e. Cyber John )
If you "can't wait" for the UPDATE.ZIP, pull it yourself and post it here!
Samsung is starting a Beta-program Android 10/OneUI 2 for the S10-series. In this thread, we'll post the UPDATE.ZIP files (when available).
REMEMBER: don't install these files if you want to have a STABLE phone! As this is a BETA, it's possible the firmware isn't BUG-free!
The UPDATE.ZIP files are pulled from a GERMAN (DBT)-device; be sure your device is on the G97xFXXS3ASII build! (Radio/CP & CSC must be on ASIE) -> Link can be found HERE
The UPDATE.ZIP can be installed on devices with the following CSC's:
SM-G975F OXM multi CSC ( ACR AFG AFR ATO AUT BGL BNG BRI CAC CAM CAU CHO COO DBT DKR ECT EGY EON EUR ILO INS ITV KSA LAO LUX MID MWD MXO MYM NEE NPL ORX PAK PEO PHE PHN ROM SEB SEE SEK SKZ SLK SMP THL THR TPA TPH TTT TUN TUR XEF XEH XEO XEU XEZ XFE XME XSG XSP XTC XXV )
single : ( BTC BTU CPW DOO EMP GLB GTO LYS MAT MM1 NZC OPS SER SIN SIO SMA STH TEB TEL TMC TNZ VAU VNZ WTL XFA XFV XNZ XSA )
How to install the UPDATE.ZIP to your S10 (by @madvinegar ); YouTube-video by SStech
ADB-method:
1. Download SDK platform tools from here https://developer.android.com/studio/releases/platform-tools
2. Extract them on your desktop.
3. Inside the extracted folder put the update.zip
4. Inside this folder, holding left shift, right click the mouse and select "open command prompt here". The command prompt will open.
5. Shutdown the phone.
6. Holding power+bixby+volume up buttons, enter into recovery mode.
7. Select "update via ADB". (you scroll down using the volume buttons and select using the power button).
8. Connect the phone to the PC using original samsung USB cable.
9. In the command prompt run the following command:
./adb devices
10. Wait to see that the daemon has started and that your device is found.
11. If you device is found, run the following command:
./adb sideload update.zip
The update process will start. You will see a percentage counting. First it will verify, then patch etc. Do not move the cable, disconnect the phone or power off the PC.
Once the process is completed (it takes some time) the phone will boot itself, update the apps and log into your home screen.
SD-card method:
1. Download the bin file and rename it to update.zip (by going to file options in win10 you can select to view the file extensions. This makes the renaming process much easier and safer, and avoids renaming the file to update.zip.zip)
2. Copy it to the root directory of your SDcard.
3. Shut down your phone.
4. Hold simultaneously Power+bixby+volume up buttons to get into stock recovery.
5. Using your volume keys navigate to "update via SdCard" and press power button to select it.
6. Again using volume keys navigate to the file "update.zip" and press power button to select it.
7. Update will start. Leave it till it completes. It will take some time.
8. Phone will reboot by itself and load android.
This will not trip KNOX if done by the method i told
NOTE: THESE UPDATE.ZIP's ARE ONLY FOR DEVICES WITH MULTI-CSC OXM!!!
You can check this, to type in your dialer *#1234#, and check if OXM is in the CSC-build...
S10+:
Beta1 (14 Oct) ASII -> ZSJ8: G975F_ASII_ZSJ8
Known BUG: https://forum.xda-developers.com/showpost.php?p=80532611&postcount=161
Beta1 (24 Oct) ASIG -> ZSJF (You must be on the Indian ASIG-build (AP/BL: ASIG, CP/CSC: ASIE)): G975F_ASIG_ZSJF
Beta2 (25 Oct) ZSJ8 -> ZSJF: G975F_ZSJ8_ZSJF
Needs to be installed with the "SD-Card method"!
EMERGENCY UPDATE (29 Oct) ZSJF -> ZSJL: G975F_ZSJF_ZSJL
Beta3 (07 Nov) ZSJL -> ZSK3: G975F_ZSJL_ZSK3
Beta4 (15 Nov) ZSK3 -> ZSK9: G975F_ZSK3_ZSK9
Beta5 (18 Nov) ZSK9 -> ZSKF: G975F_ZSK9_ZSKF (thanks to @Robert Smali)
Beta6 (21 Nov) ZSKF -> ZSKJ: G975F_ZSKF_ZSKJ
Beta7 (25 Nov) ZSKJ -> ZSKL: G975F_ZSKJ_ZSKL (Thanks to SamMobile)
Stable/Final (28 Nov) ZSKL -> BSKO: G975F_ZSKL_BSKO
S10:
Beta1 (14 Oct) ASII -> ZSJ8: G973F_ASII_ZSJ8
Known BUG: https://forum.xda-developers.com/showpost.php?p=80532611&postcount=161
Beta2 (25 Oct) ZSJ8 -> ZSJF: G973F_ZSJ8_ZSJF
Needs to be installed with the "SD-Card method"!
EMERGENCY UPDATE (29 Oct) ZSJF -> ZSJL: G973F_ZSJF_ZSJL
Beta3 (07 Nov) ZSJL -> ZSK3: G973F_ZSJL_ZSK3
Beta4 (15 Nov) ZSK3 -> ZSK9: G973F_ZSK3_ZSK9 (thanks to @runtime_Err0r)
Beta5 (18 Nov) ZSK9 -> ZSKF: G973F_ZSK9_ZSKF (thanks to @runtime_Err0r)
Beta6 (21 Nov) ZSKF -> ZSKJ: G973F_ZSKF_ZSKJ
Beta7 (25 Nov) ZSKJ -> ZSKL: G973F_ZSKJ_ZSKL (thanks to @runtime_Err0r)
Stable/Final (28 Nov) ZSKL -> BSKO: G973F_ZSKL_BSKO
S10e:
Beta1 (14 Oct) ASII -> ZSJ8: G970F_ASII_ZSJ8
Known BUG: https://forum.xda-developers.com/showpost.php?p=80532611&postcount=161
Beta2 (25 Oct) ZSJ8 -> ZSJF: G970F_ZSJ8_ZSJF
Needs to be installed with the "SD-Card method"!
EMERGENCY UPDATE (29 Oct) ZSJF -> ZSJL: G970F_ZSJF_ZSJL
Beta3 (07 Nov) ZSJL -> ZSK3: G970F_ZSJL_ZSK3
Beta4 (15 Nov) ZSK3 -> ZSK9: G970F_ZSK3_ZSK9
Beta5 (18 Nov) ZSK9 -> ZSKF: G970F_ZSK9_ZSKF (thanks to @Robert Smali)
Beta6 (21 Nov) ZSKF -> ZSKJ: G970F_ZSKF_ZSKJ
Beta7 (25 Nov) ZSKJ -> ZSKL: G970F_ZSKJ_ZSKL (Thanks to SamMobile)
Stable/Final (28 Nov) ZSKL -> BSKO: G970F_ZSKL_BSKO
RENAME THE FILE TO update.zip
NOTE: after installing the update, CLEAR your cache by going into recovery (VolUP - Bixby - Power)
If you want to run the BETA-firmware flawlessly, do a FACTORY-reset afterwards... (not necessary, but... )
UPDATING to Beta is your own choice, and I don't take responsibility if something is going wrong!
If you're NOT officially registered, you WON'T receive OTA: you'll have to update everytime MANUALLY with above method!!!
If you want to DOWNGRADE back to Pie: download the latest Pie-firmware for your own CSC, flash AP BL CP & CSC_OXM -> your device will reset afterwards which is mandatory!
henklbr said:
In this thread, we'll post the UPDATE.ZIP files (when available).
Click to expand...
Click to collapse
Glad to find you again on these subforums mate! :victory:
Felt the need to thank you and all the guys making beta updates possible worldwide!
Regards
@henklbr thanks we are all counting on you!!!
Beta has been delayed.
https://www.sammobile.com/news/galaxy-s10-one-ui-2-0-beta-delayed/
iamnotkurtcobain said:
Beta has been delayed.
https://www.sammobile.com/news/galaxy-s10-one-ui-2-0-beta-delayed/
Click to expand...
Click to collapse
Idk what to say... Someone at phonearena is probably already running on beta 1
https://www.facebook.com/PhoneArena/photos/a.10150238082179598/10157512410184598/?type=3&__tn__=-R
corsicanu said:
Idk what to say... Someone at phonearena is probably already running on beta 1
https://www.facebook.com/PhoneArena/photos/a.10150238082179598/10157512410184598/?type=3&__tn__=-R
Click to expand...
Click to collapse
Wow...
Hi, I know it's not on the compatible list but I have this feeling that it might be compatible.
G975FXXU3ASIG
CSC G975FOWO3ASIG
G975F/DS
Thanks
rmarcus said:
Hi, I know it's not on the compatible list but I have this feeling that it might be compatible.
G975FXXU3ASIG
CSC G975FOWO3ASIG
G975F/DS
Thanks
Click to expand...
Click to collapse
Read the first post...
No: it's NOT compatible!
corsicanu said:
Idk what to say... Someone at phonearena is probably already running on beta 1
https://www.facebook.com/PhoneArena/photos/a.10150238082179598/10157512410184598/?type=3&__tn__=-R
Click to expand...
Click to collapse
We saw this too at SamMobile; we asked PhoneArena for more info: NO reaction at all!
No-one at our office has the possibility to install the update yet, neither are people from the German Samsung community!
henklbr said:
We saw this too at SamMobile; we asked PhoneArena for more info: NO reaction at all!
No-one at our office has the possibility to install the update yet, neither are people from the German Samsung community!
Click to expand...
Click to collapse
I'm aware of the fact they are the only one to come with this and 0 useful information attached, but the "Update: We reached out to Samsung and the company confirmed to us that the beta program has indeed been delayed. No new date has been provided yet." is doubtful too imho since this was posted on Samsung forums, furtherly thinking at this picture being posted more recently than the korean delay announcement.
Don't get me wrong, i'm not trying to start a riot or something, i just still think and hope they will deliver beta today at some point in Germany.
All the best!
corsicanu said:
I'm aware of the fact they are the only one to come with this and 0 useful information attached, but the "Update: We reached out to Samsung and the company confirmed to us that the beta program has indeed been delayed. No new date has been provided yet." is doubtful too imho since this was posted on Samsung forums, furtherly thinking at this picture being posted more recently than the korean delay announcement.
Don't get me wrong, i'm not trying to start a riot or something, i just still think and hope they will deliver beta today at some point in Germany.
All the best!
Click to expand...
Click to collapse
I'm afraid the Beta has indeed been delayed, because we (SamMobile) got the news from Samsung Korea...
henklbr said:
I'm afraid the Beta has indeed been delayed, because we (SamMobile) got the news from Samsung Korea...
Click to expand...
Click to collapse
Did they mention at any point worldwide beta was delayed or only korean? I'm trying to understand why did Samsung Germany posted those things while it was already conclusioned as delayed..
corsicanu said:
Did they mention at any point worldwide beta was delayed or only korean? I'm trying to understand why did Samsung Germany posted those things while it was already conclusioned as delayed..
Click to expand...
Click to collapse
No: they did not...
So: have a little more patience, that's all we can say...
So only those with the October security patch could use the update.zip?
Monigote97 said:
So only those with the October security patch could use the update.zip?
Click to expand...
Click to collapse
Yes, and multi csc oxm
henklbr said:
No: they did not...
So: have a little more patience, that's all we can say...
Click to expand...
Click to collapse
Speaking of phonearena, they were probably working on this:
https://www.phonearena.com/news/And...0-Hands-on-with-all-the-new-features_id119559
Now we know
Hi OP. Have you captured the update URL? If you have, Can you please share the URL so other people can also try to pull the update!
kazim.asghar said:
Hi OP. Have you captured the update URL? If you have, Can you please share the URL so other people can also try to pull the update!
Click to expand...
Click to collapse
Read the 2nd Paragraph of message #1:
Continuously "asking" "where's the UPDATE.ZIP" is NOT DONE!
Be aware, it's NOT very easy to pull the UPDATE.ZIP, and is done by persons in their free time! ( i.e. @CyberJ0hn )
If you "can't wait" for the UPDATE.ZIP, pull it yourself and post it here!
There is NO URL yet! When it's available, you can find it in this thread (maybe)...
I don't really get your reasoning on creating this thread.
You create a full readme on how to update and which devices but without the actual download and then you refrain people asking for updates. This is basically calling these questions upon yourself.
Even worse, you act like some community manager that has to handle thousands of requests day by day by your impolite responses. What did you actually expect what would happen?
Nevertheless, nice guide. Can't wait till beta releases for our devices!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
(EXYNOS ONLY) Samsung Galaxy S10 series OneUI 3.0 Android 11 Beta Thread.
Samsung has started the Android 11 Beta program for the Galaxy S10 series
This thread will be for sharing tips and help and update.zip/.bin files (when available) for the upcoming OneUI 3.0 Android 11 Beta for the Galaxy S10 series (Exynos/International/Unlocked) version.
Eligible models
-Galaxy S10e (SM-G970F)
-Galaxy S10 (SM-G973F)
-Galaxy S10+ (SM-G975F)
ADB-method:
1. Download SDK platform tools from here https://developer.android.com/studio/releases/platform-tools
2. Extract them on your desktop.
3. Inside the extracted folder put the update.zip
4. Inside this folder, holding left shift, right click the mouse and select "open command prompt here". The command prompt will open.
5. Shutdown the phone.
6. Holding power+bixby+volume up buttons, enter into recovery mode.
7. Select "update via ADB". (you scroll down using the volume buttons and select using the power button).
8. Connect the phone to the PC using original samsung USB cable.
9. In the command prompt run the following command:
./adb devices
10. Wait to see that the daemon has started and that your device is found.
11. If you device is found, run the following command:
./adb sideload update.zip
SD-card method:
1. Download the bin file and rename it to update.zip (by going to file options in win10 you can select to view the file extensions. This makes the renaming process much easier and safer, and avoids renaming the file to update.zip.zip)
2. Copy it to the root directory of your SDcard.
3. Shut down your phone.
4. Hold simultaneously Power+bixby+volume up buttons to get into stock recovery.
5. Using your volume keys navigate to "update via SdCard" and press power button to select it.
6. Again using volume keys navigate to the file "update.zip" and press power button to select it.
7. Update will start. Leave it till it completes. It will take some time.
8. Phone will reboot by itself and load android.
The update process will start. You will see a percentage counting. First it will verify, then patch etc. Do not move the cable, disconnect the phone or power off the PC.
Once the process is completed (it takes some time) the phone will boot itself, update the apps and log into your home screen.
This will not trip knox if done by the methods above
Don't install a beta unless you are fully aware what you are going into.
Don't install the beta if you want your phone to be stable, IT'S a BETA.
Please don't keep asking over and over again about the update.zip files, If it's available then it will be present in the latest posts or in this thread. If not then no one has pulled it yet.
It's recommended to make a backup of your data before updating to the Android 11 Beta.
-Update.zip FOTA links:
S10e (SM-G970F):
Beta 1 DTJA -> ZTKF
Direct Link to Beta 2 from Android 10 (DTL1):
Beta 2 DTL1 -> ZTL8
S10 (SM-G973F):
Beta 1 DTJA -> ZTKF
Beta 2 ZTKF -> ZTL8
Direct link to Beta 2 from Android 10 (DTL1):
Beta 2 DTL1 -> ZTL8
S10+ (SM-G975F):
Beta 1 DTJA -> ZTKF
Beta 2 ZTKF -> ZTL8
Beta 3 ZTL8 -> ZTLJ
OneUI 3.1 EUA4 -> FUBD thanks to @AndrzejDwo
S10 5G (SM-G977N):
Beta 1 DTJ8 -> ZTKF
Beta 2 ZTKF -> ZTL8
-Update.zip Gdrive Links:
In case links above are not working for you.
S10e (SM-G970F):
Beta 1 (DTJA -> ZTKF)
GDrive Link
S10 (SM-G973F):
Beta 1 (DTJA -> ZTKF)
GDrive Link
S10+ (SM-G975F):
Beta 1 (DTJA -> ZTKF)
GDrive Link
As of Beta 1, when you try to update to Beta 2 with SD Card method, adb will not recognize the SD Card for some reason, you will need to use the ADB method in order to flash Beta 2.
Rename the .bin file to update.zip in order to be able to flash it from recovery.
A common mistake done by some people is that they see the file name update while its a WinRAR.zip file already, then they add another .zip making the name of the file update.zip.zip which will not be flashed successfully, Make sure you do it right.
Important Notes:
1. You cannot go into recovery using the old method in this beta, However, there are two work arounds
Method 1:
1. Connect your phone to your PC (Make sure USB debugging is on).
2. Using ADB, enter the command ./adb reboot recovery
3. Wait a little and you should be in recovery mode.
Method 2:
1. Power off your device
2. Connect your device to a PC or use the AKG earphones.
3. Hold down Volume up + Bixby + Power buttons and keep pressing them until you enter recovery mode.
2. GPay Does not work in the Beta, And will continue not to work until the stable version gets released.
Updating to the beta is AT YOUR RISK, No one is responsible if anything goes wrong.
You will not receive OTAs again UNTIL you are on a firmware that gets released for your CSC, thats most likely not happening before the BETA is over.
Small note:
My S10+ device isn't from a country that has a beta program, so i will not be able to pull the update.zip file unfortunately, But i will try my BEST to keep the thread updated with the latest beta update.zip file (If/when someone pulls it)
How to capture the update.zip file to share with other people:
1. Download HTTP canary app from playstore
2. Open HTTP Canary app
3. Start the update by pressing "download" and don't pause it
4. Go back to canary app and start it and it will grab the link for you
This thread was heavily inspired by @henklbr's great efforts in the last beta threads for different samsung devices, Also thanks to him for letting me copy little parts from his threads.
Wait and see. ?
I'm waiting eagirly to try it??
The exynos Galaxy Note 10+ started receiving the beta yesterday, Im expecting the S10 series to receive the beta Tuesday or Wednesday. Lets wait and see..
AhmedMomen said:
The exynos Galaxy Note 10+ started receiving the beta yesterday, Im expecting the S10 series to receive the beta Tuesday or Wednesday. Lets wait and see..
Click to expand...
Click to collapse
Do you have the link for the update file ?
I have a exynos, but I am not in one of the countries where you can apply for the beta
ashes said:
Do you have the link for the update file ?
I have a exynos, but I am not in one of the countries where you can apply for the beta
Click to expand...
Click to collapse
It's not out for the galaxy s10 series yet.
Hopefully it will come out in the next 2 days.
waiting.
Waiting :good:
Mohamad Gahed said:
Waiting :good:
Click to expand...
Click to collapse
Alrighty then
Mhh...this delay is weird. I'm afraid we'll have to wait a few more weeks.
Noooooo!
Excited!
Gonna get my S10 out again. Highly anxious to try it out again. Love that phone!
BinaryShadow said:
Gonna get my S10 out again. Highly anxious to try it out again. Love that phone!
Click to expand...
Click to collapse
Welcome.
Dobro došao.
Also today still nothing...
I mean the note 10 got it last saturday so i dont think the s10 update will be delayed much, seems like its either tommorow or friday-saturday then.. (hopefully not later than that). Fingers crossed.
AhmedMomen said:
I mean the note 10 got it last saturday so i dont think the s10 update will be delayed much, seems like its either tommorow or friday-saturday then.. (hopefully not later than that). Fingers crossed.
Click to expand...
Click to collapse
And I think it should come this week. I am SEE (South East Europe).
I hope so to!
GALAXY S10, Z FLIP & FOLD 2 ONE UI 3.0 BETA UPDATE POSTPONED
https://www.tizenhelp.com/galaxy-s10-z-flip-fold-2-one-ui-3-0-beta-update-postponed/
ZmisiS said:
GALAXY S10, Z FLIP & FOLD 2 ONE UI 3.0 BETA UPDATE POSTPONED
https://www.tizenhelp.com/galaxy-s10-z-flip-fold-2-one-ui-3-0-beta-update-postponed/
Click to expand...
Click to collapse
Its either friday-saturday or next tuesday then it seems...
ZmisiS said:
GALAXY S10, Z FLIP & FOLD 2 ONE UI 3.0 BETA UPDATE POSTPONED
https://www.tizenhelp.com/galaxy-s10-z-flip-fold-2-one-ui-3-0-beta-update-postponed/
Click to expand...
Click to collapse
I would have bet on it.
Hello everyone! I made a tutorial regarding flashing the latest update when not available in your region:
Video tutorial:
Spoiler: Video
Steps:
1. Download and extract both Frija and Odin.
2. Launch Frija.
3. Check the "Auto" button. Write your device's Model Number and CSC
(Your model number is at Settings, then About phone).
4. Click on "Check Update".
5. Click on "Download" and choose a folder to save the firmware.
6. After the download is complete, extract the firmware .zip.
7. Launch Odin.
8. Click the "BL" button and select the file that starts with "BL_...".
9. Click the "AP" button and select the file that starts with "AP_...".
10. Click the "CP" button and select the file that starts with "CP_...".
11. Click the "CSC" button and select the file that starts with "HOME_CSC_..." (Selecting CSC_... will wipe your data!).
12. Turn off your phone.
13. Boot into Download Mode by holding both Volume Up + Volume Down buttons and then connecting it to your PC.
14. After booting into Download Mode, press the Volume Up button to continue.
15. Back to Odin, click "Start".
16. The flashing process will be over when "PASS" is shown in Odin and your phone reboots. You may close Odin and disconnect the phone from your PC then.
17. Congrats! You have successfully flashed the latest update to your device.
18. After your phone is on, turn it off again.
19. Boot into Recovery Mode by connecting to your PC and holding Volume Up + Power Button (+ Bixby Button).
20. Navigating with the Volume Buttons and selecting with the Power Button, go to "Wipe cache partition".
21. Select "Yes".
22. Select "Reboot system now".
Links:
Odin 3 by Samsung:
Index of /samsung-tools/
Frija by invmini:
[Tool] Frija - Samsung firmware downloader/checker
* * * PLEASE UNDERSTAND WHAT YOU ARE INSTALLING TO YOUR DEVICES AT ALL TIMES AND ME AND THE DEVELOPER ARE NOT RESPONSIBLE FOR ANY SORT OF DAMAGE TO YOUR DEVICE * * * Hey Guys :) Frija is a new tool (successor of now depreciated tool SamFirm)...
forum.xda-developers.com
CSCs Cheat Sheet:
List of Samsung Galaxy CSC Country Specific Product code and region they belong to
List of CSC Country Specific code for Samsung Galaxy & various countries, regions, network carriers, model numbers, variants phone belong to.
www.androidsage.com
I hope it helps you!
Can I patch Magisk on the AP file before doing this and have it work? Can anyone confirm?
its hard to speak of Frija without also mentioning SamFirm. Its an equally effective tool to obtain firmware. I was unaware that FW was available for this device already. Good news for the modding community
can I flash BTU SM-G781B on XSG SM-G781B with Odin? will I lose any functionality? will I get regular BTU ota updates?
kk12002 said:
can I flash BTU SM-G781B on XSG SM-G781B with Odin? will I lose any functionality? will I get regular BTU ota updates?
Click to expand...
Click to collapse
You may flash it and no functionality will be lost. However, you will still be getting XSG updates in the future.
If you wish to change the CSC too and haven't updated to the January 2021 patch yet, please check my other tutorial:
[GUIDE] Change your CSC on any Samsung Galaxy devices running Android 10 or older - will also work in Android 11 for builds older than January 2021
Hello everyone! I made this video tutorial regarding changing the CSC on your Samsung Galaxy device. This method will work for Android 10 and older, and Android 11 (builds older than January 2021). Credits to...
forum.xda-developers.com
BredzProh said:
You may flash it and no functionality will be lost. However, you will still be getting XSG updates in the future.
If you wish to change the CSC too and haven't updated to the January 2021 patch yet, please check my other tutorial:
[GUIDE] Change your CSC on any Samsung Galaxy devices running Android 10 or older - will also work in Android 11 for builds older than January 2021
Hello everyone! I made this video tutorial regarding changing the CSC on your Samsung Galaxy device. This method will work for Android 10 and older, and Android 11 (builds older than January 2021). Credits to...
forum.xda-developers.com
Click to expand...
Click to collapse
thanks for the info. so the basic CSC is hard coded and cannot be changed or is there a way to get BTU otas? I'm only doing this to get the latest ota asap.
also would u recommend DBT or BTU.. are both multi CSC? I Thanks again
kk12002 said:
thanks for the info. so the basic CSC is hard coded and cannot be changed or is there a way to get BTU otas? I'm only doing this to get the latest ota asap.
also would u recommend DBT or BTU.. are both multi CSC? I Thanks again
Click to expand...
Click to collapse
Yes you are doing it right. If you want to get the latest OTA manually, you flash it every time, having XSG.
If you want to always be the first to get the latest OTA, I would suggest DBT.
DBT and BTU are the same regarding updates, but there are a lot of cases when DBT is the first to get them.
2 questions
1 Will this trip knox?
2 will I receive updates as normal?
Does flashing with odin loses waranty in any way? Im from israel and people here says that any touches other then getting ota manualy and update loses waranty to the device…
Thanks it worked for me
bmakk2055 said:
2 questions
1 Will this trip knox?
2 will I receive updates as normal?
Click to expand...
Click to collapse
Hello!
1- No, it will not. Knox will be tripped only if you root your device.
2. Yes!
galza said:
Does flashing with odin loses waranty in any way? Im from israel and people here says that any touches other then getting ota manualy and update loses waranty to the device…
Click to expand...
Click to collapse
No, you will not lose your warranty!
Warranty is lost only if you install a custom (unoffical) ROM or by rooting your devide.
BredzProh said:
Hello!
1- No, it will not. Knox will be tripped only if you root your device.
2. Yes!
Click to expand...
Click to collapse
Ok thanks
I managed to upgrade my SM-G781W model using this method, but I cannot downgrade. Is this normal?
kbytes said:
I managed to upgrade my SM-G781W model using this method, but I cannot downgrade. Is this normal?
Click to expand...
Click to collapse
sadly yes, Samsung made downgrading impossible after 3.1
Ayuda por favor Creo que destruí mi teléfono celular. La actualización de Odin falló y la pantalla dice que se ha producido un error al actualizar el software del dispositivo.
AlexSomozus said:
Ayuda por favor Creo que destruí mi teléfono celular. La actualización de Odin falló y la pantalla dice que se ha producido un error al actualizar el software del dispositivo.
Click to expand...
Click to collapse
you might have flashed the wrong version/kind for your phone.
Make sure you have the correct version. is it unlocked? is it an actual international?
we need more information to help you at all.
I keep getting error "Re-Partition operation failed". I don't have the repartition option ticked. I'm trying to flash SM-G781U1 to replace G781U. Advice?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I have a bricked SD/SIM slot after an OTA update, can I flash the firmware via ODIN and retain all data on the phone?
Alright, did this 2 weeks ago when I reverted to stock ROM. this time I used sammobile to download the firmware (firmware version ILO - As it was on original bootloader). Fortunately, it worked and after relocking the bootloader, about 95% of the features came back to work, this includes:
* Play Certificate
* OTA Updates
* Most of Samsung features including some Knox protected features working fine again
* CSC features including call recording work fine
* Banking apps including wallet work fine again
* Galaxy wearable, private share, fine my device worked fine no matter the tripped knox.
The only issues were on some more knox resicted apps such Samsung health, samsung pass, secure folder. but anyways I don't use them mainly so I don't really care about losing them and I can always find alternatives for them, Google apps are excellent choice. I won't throw away my device just because those tiny amount of apps won't work. As long my phone is fine I'm happy.
Would consider to keep the device with stock ROM unless newer custom ROM of android 14 comes (and a one that is actually for daily use lol)
In this thread, You can share and discuss other links of new official stock firmware for the Galaxy Z Fold 3 International (NO CUSTOM ROMs and/or ROOT talk).
How to flash firmware to your phone:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
1. Extract the firmware file (i.e. to folder C:\Odin) ***
2. Download Odin v3.14.4
3. Extract the Odin ZIP file (i.e. to folder C:\Odin)
4. Open Odin
5. Power OFF your Z Fold3
6. Reboot Phone in Download Mode: Hold down "Volume up" and "Volume down" at same time. While holding down, connect the your phone to your PC via USB. Or use the command "adb reboot-bootloader".
7. Wait until you get a blue sign in Odin
8. Add the firmware files to their designated slots (AP in AP, BL in BL, CP in CP, HOME_CSC in CSC). USERDATA stays EMPTY!
10. Click the start button, sit back and wait few minutes for the device to automatically restart.
*** You can find the latest firmware on Post #2
Latest firmware for the Galaxy Z Fold3
CHANGELOG:
• Stability and reliability
Device behavior has been improved.
• Security
The device is protected with improved security.
Click to expand...
Click to collapse
This is the latest ROM for Multi-CSC OXM and can be used for ALL CSC's mentioned in Multi-CSC OXM!
This is an official Samsung ROM so KNOX will not be triggered!
Model SM-F926B
Model name Galaxy Z Fold3
Country Multi-CSC OXM
Version Android 13
Changelist 26203421
Build date 2023-06-1
Security Patch Level 2023-06-01
Multi-CSC OXM
PDA F926BXXU4EWF1
CSC F926BOXM4EWF1
Details for download with Frija:
Unzip the archive and place the files in the designated slots in Odin 3.14.4
HOME_CSC_OXM -> data will stay intact
CSC_OXM -> device will reset to factory settings
Multi-CSC Descriptions
The Asian model (XTC by default) of the Z Fold3 (SM-F926B) will get a Multi-CSC designated as OXM and that is the main focus of this particular thread but others can and will be discussed.
CountryProduct CodeMulti-CSCAfghanistan(AFG)OXMAlbania(AVF)OXMAustralia(XSA)OXMAustralia(OPS)OXMAustralia(TEL)OXMAustralia(VAU)OXMAustria(DRE)OXMAustria(MOB)OXMAustria(MAX)OXMAustria(ATO)OXMBaltic(SEB)OXMBulgaria(BGL)OXMCaucasus Countries(CAU)OXMChile(CHO)OXMCroatia(CRO)OXMCroatia(VIP)OXMCzech Republic(XEZ)OXMCzech Republic(O2C)OXMCzech Republic(TMZ)OXMCzech Republic(VDC)OXMEgypt(EGY)OXMFrance(XEF)OXMFrance(BOG)OXMFrance(FTM)OXMFrance(SFR)OXMGermany(DBT)OXMGermany(DTM)OXMGermany(VD2)OXMGreece(EUR)OXMGreece(COS)OXMGreece(VGR)OXMHungary(XEH)OXMHungary(TMH)OXMIndia(INU)OXMIraq(MID)OXMIreland(TSI)OXMIreland(MET)OXMIreland(3IE)OXMIreland(VDI)OXMIsrael(ILO)OXMItaly(ITV)OXMItaly(HUI)OXMItaly(TIM)OXMItaly(OMN)OXMKazakhstan(SKZ)OXMKenya(AFR)OXMKenya(DKR)OXMLebanon(ILP)OXMLibya(BTC)OXMLuxembourg(LUX)OXMMacedonia(MBM)OXMMalaysia(XME)OXMMorocco(MWD)OXMNepal(NPL)OXMNetherlands(PHN)OXMNetherlands(TNL)OXMNetherlands(VDF)OXMNigeria(ECT)OXMNordic countries(NEE)OXMPakistan(PAK)OXMPanama(TPA)OXMPhilippines(GLB)OXMPhilippines(XTC)OXMPoland(XEO)OXMPoland(OPV)OXMPoland(PLS)OXMPoland(PRT)OXMPoland(TPL)OXMPortugal(MEO)OXMPortugal(TPH)OXMPortugal(TCL)OXMRomania(ROM)OXMRomania(COA)OXMRomania(ORO)OXMRomania(CNX)OXMRussia(SER)OXMSaudi Arabia(KSA)OXMSaudi Arabia(ACR)OXMSerbia(MSR)OXMSerbia(TOP)OXMSingapore(MM1)OXMSingapore(XSP)OXMSingapore(SIN)OXMSingapore(STH)OXMSlovakia(ORX)OXMSlovakia(ORS)OXMSlovakia(TMS)OXMSlovenia(SIO)OXMSlovenia(MOT)OXMSlovenia(SIM)OXMSouth Africa(XFE)OXMSouth Africa(XFA)OXMSouth Africa(XFV)OXMSouth East Europe(SEE)OXMSpain(PHE)OXMSpain(XEC)OXMSpain(AMO)OXMSpain(ATL)OXMSri Lanka(SLK)OXMSweden(HTS)OXMSwitzerland(AUT)OXMSwitzerland(SWC)OXMThailand(THL)OXMThailand(MYM)OXMTrinidad and Tobago(EON)OXMTunisia(TUN)OXMTurkey(TUR)OXMUkraine(SEK)OXMUnited Arab Emirates(LYS)OXMUnited Arab Emirates(XSG)OXMUnited Kingdom(BTU)OXMUnited Kingdom(EVR)OXMUnited Kingdom(H3G)OXMUnited Kingdom(O2U)OXMUnited Kingdom(VOD)OXMUnknown(EUX)OXMUnknown(EUY)OXMUnknown(XNZ)OXMUzbekistan(CAC)OXMVietnam(XXV)OXM
These are the other Multi-CSC types available that may see new updates released at different times:
CountryProduct CodeMulti-CSCArgentina(ANC)OWEChile(CHE)OWECosta Rica(ICE)OWEDominican Republic(DOR)OWEJamaica(CWW)OWEUnknown(BAT)OWE
CountryProduct CodeMulti-CSCArgentina(ARO)OWOArgentina(CTI)OWOArgentina(UFN)OWOArgentina(PSN)OWOBolivia(BVO)OWOBrazil(ZTO)OWOBrazil(ZTA)OWOBrazil(ZTM)OWOBrazil(ZVV)OWOChile(CRC)OWOChile(CHL)OWOChile(CHT)OWOColombia(COL)OWOColombia(COO)OWOColombia(COM)OWOColombia(COB)OWODominican Republic(CDR)OWOEcuador(EBE)OWOEcuador(ECO)OWOGuatemala(PGU)OWOGuatemala(CGU)OWOMexico(IUS)OWOMexico(TMM)OWOMexico(TCE)OWOPanama(CPA)OWOParaguay(UPO)OWOParaguay(PSP)OWOParaguay(TGP)OWOPeru(PET)OWOPeru(PEO)OWOPeru(PNT)OWOPeru(SAM)OWOSouth America(NBS)OWOUnknown(BVT)OWOUnknown(MXO)OWOUruguay(UFU)OWOUruguay(CTU)OWO
Lastly, phones with these product codes do not currently share CSC with different countries:
CountryProduct CodeCSCIndonesia(XID)OLE
RESERVED #3
Very good
annson08 said:
Multi-CSC Descriptions
The Asian model (XTC by default) of the Z Fold3 (SM-F926B) will get a Multi-CSC designated as OXM and that is the main focus of this particular thread but others can and will be discussed.
CountryProduct CodeMulti-CSCAfghanistan(AFG)OXMAlbania(AVF)OXMAustralia(XSA)OXMAustralia(OPS)OXMAustralia(TEL)OXMAustralia(VAU)OXMAustria(DRE)OXMAustria(MOB)OXMAustria(MAX)OXMAustria(ATO)OXMBaltic(SEB)OXMBulgaria(BGL)OXMCaucasus Countries(CAU)OXMChile(CHO)OXMCroatia(CRO)OXMCroatia(VIP)OXMCzech Republic(XEZ)OXMCzech Republic(O2C)OXMCzech Republic(TMZ)OXMCzech Republic(VDC)OXMEgypt(EGY)OXMFrance(XEF)OXMFrance(BOG)OXMFrance(FTM)OXMFrance(SFR)OXMGermany(DBT)OXMGermany(DTM)OXMGermany(VD2)OXMGreece(EUR)OXMGreece(COS)OXMGreece(VGR)OXMHungary(XEH)OXMHungary(TMH)OXMIndia(INU)OXMIraq(MID)OXMIreland(TSI)OXMIreland(MET)OXMIreland(3IE)OXMIreland(VDI)OXMIsrael(ILO)OXMItaly(ITV)OXMItaly(HUI)OXMItaly(TIM)OXMItaly(OMN)OXMKazakhstan(SKZ)OXMKenya(AFR)OXMKenya(DKR)OXMLebanon(ILP)OXMLibya(BTC)OXMLuxembourg(LUX)OXMMacedonia(MBM)OXMMalaysia(XME)OXMMorocco(MWD)OXMNepal(NPL)OXMNetherlands(PHN)OXMNetherlands(TNL)OXMNetherlands(VDF)OXMNigeria(ECT)OXMNordic countries(NEE)OXMPakistan(PAK)OXMPanama(TPA)OXMPhilippines(GLB)OXMPhilippines(XTC)OXMPoland(XEO)OXMPoland(OPV)OXMPoland(PLS)OXMPoland(PRT)OXMPoland(TPL)OXMPortugal(MEO)OXMPortugal(TPH)OXMPortugal(TCL)OXMRomania(ROM)OXMRomania(COA)OXMRomania(ORO)OXMRomania(CNX)OXMRussia(SER)OXMSaudi Arabia(KSA)OXMSaudi Arabia(ACR)OXMSerbia(MSR)OXMSerbia(TOP)OXMSingapore(MM1)OXMSingapore(XSP)OXMSingapore(SIN)OXMSingapore(STH)OXMSlovakia(ORX)OXMSlovakia(ORS)OXMSlovakia(TMS)OXMSlovenia(SIO)OXMSlovenia(MOT)OXMSlovenia(SIM)OXMSouth Africa(XFE)OXMSouth Africa(XFA)OXMSouth Africa(XFV)OXMSouth East Europe(SEE)OXMSpain(PHE)OXMSpain(XEC)OXMSpain(AMO)OXMSpain(ATL)OXMSri Lanka(SLK)OXMSweden(HTS)OXMSwitzerland(AUT)OXMSwitzerland(SWC)OXMThailand(THL)OXMThailand(MYM)OXMTrinidad and Tobago(EON)OXMTunisia(TUN)OXMTurkey(TUR)OXMUkraine(SEK)OXMUnited Arab Emirates(LYS)OXMUnited Arab Emirates(XSG)OXMUnited Kingdom(BTU)OXMUnited Kingdom(EVR)OXMUnited Kingdom(H3G)OXMUnited Kingdom(O2U)OXMUnited Kingdom(VOD)OXMUnknown(XNZ)OXMUzbekistan(CAC)OXMVietnam(XXV)OXM
These are the other Multi-CSC types available that may see new updates released at different times:
CountryProduct CodeMulti-CSCArgentina(ANC)OWEChile(CHE)OWECosta Rica(ICE)OWEDominican Republic(DOR)OWEJamaica(CWW)OWEUnknown(BAT)OWE
CountryProduct CodeMulti-CSCArgentina(ARO)OWOArgentina(CTI)OWOArgentina(UFN)OWOArgentina(PSN)OWOBolivia(BVO)OWOBrazil(ZTO)OWOBrazil(ZTA)OWOBrazil(ZTM)OWOBrazil(ZVV)OWOChile(CRC)OWOChile(CHL)OWOChile(CHT)OWOColombia(COL)OWOColombia(COO)OWOColombia(COM)OWOColombia(COB)OWODominican Republic(CDR)OWOEcuador(EBE)OWOEcuador(ECO)OWOGuatemala(PGU)OWOGuatemala(CGU)OWOMexico(IUS)OWOMexico(TMM)OWOMexico(TCE)OWOPanama(CPA)OWOParaguay(UPO)OWOParaguay(PSP)OWOParaguay(TGP)OWOPeru(PET)OWOPeru(PEO)OWOPeru(PNT)OWOPeru(SAM)OWOSouth America(NBS)OWOUnknown(BVT)OWOUnknown(MXO)OWOUruguay(UFU)OWOUruguay(CTU)OWO
Lastly, phones with these product codes do not currently share CSC with different countries:
CountryProduct CodeCSCIndonesia(XID)OLE
Click to expand...
Click to collapse
The links lead to S21 Ultra Software, not Z Fold3
hkr said:
The links lead to S21 Ultra Software, not Z Fold3
Click to expand...
Click to collapse
Thanks, updating rn.
EDIT: Updated. Please note that not all countries has firmware for them YET so some links will return as "not found".
annson08 said:
In this thread, You can share and discuss other links of new official stock firmware for the Galaxy Z Fold 3 International (NO CUSTOM ROMs and/or ROOT talk).
How to flash firmware to your phone:
View attachment 5498513
1. Extract the firmware file (i.e. to folder C:\Odin) ***
2. Download Odin v3.14.4
3. Extract the Odin ZIP file (i.e. to folder C:\Odin)
4. Open Odin
5. Power OFF your Z Fold3
6. Reboot Phone in Download Mode: Hold down "Volume up" and "Volume down" at same time. While holding down, connect the your phone to your PC via USB. Or use the command "adb reboot-bootloader".
7. Wait until you get a blue sign in Odin
8. Add the firmware files to their designated slots (AP in AP, BL in BL, CP in CP, HOME_CSC in CSC). USERDATA stays EMPTY!
10. Click the start button, sit back and wait few minutes for the device to automatically restart.
*** You can find the latest firmware on Post #2
Click to expand...
Click to collapse
SM-F926B Official Firmware One UI 4 (Android 12) for Bangladesh (BKD) available?
annson08 said:
Multi-CSC Descriptions
The Asian model (XTC by default) of the Z Fold3 (SM-F926B) will get a Multi-CSC designated as OXM and that is the main focus of this particular thread but others can and will be discussed.
CountryProduct CodeMulti-CSCAfghanistan(AFG)OXMAlbania(AVF)OXMAustralia(XSA)OXMAustralia(OPS)OXMAustralia(TEL)OXMAustralia(VAU)OXMAustria(DRE)OXMAustria(MOB)OXMAustria(MAX)OXMAustria(ATO)OXMBaltic(SEB)OXMBulgaria(BGL)OXMCaucasus Countries(CAU)OXMChile(CHO)OXMCroatia(CRO)OXMCroatia(VIP)OXMCzech Republic(XEZ)OXMCzech Republic(O2C)OXMCzech Republic(TMZ)OXMCzech Republic(VDC)OXMEgypt(EGY)OXMFrance(XEF)OXMFrance(BOG)OXMFrance(FTM)OXMFrance(SFR)OXMGermany(DBT)OXMGermany(DTM)OXMGermany(VD2)OXMGreece(EUR)OXMGreece(COS)OXMGreece(VGR)OXMHungary(XEH)OXMHungary(TMH)OXMIndia(INU)OXMIraq(MID)OXMIreland(TSI)OXMIreland(MET)OXMIreland(3IE)OXMIreland(VDI)OXMIsrael(ILO)OXMItaly(ITV)OXMItaly(HUI)OXMItaly(TIM)OXMItaly(OMN)OXMKazakhstan(SKZ)OXMKenya(AFR)OXMKenya(DKR)OXMLebanon(ILP)OXMLibya(BTC)OXMLuxembourg(LUX)OXMMacedonia(MBM)OXMMalaysia(XME)OXMMorocco(MWD)OXMNepal(NPL)OXMNetherlands(PHN)OXMNetherlands(TNL)OXMNetherlands(VDF)OXMNigeria(ECT)OXMNordic countries(NEE)OXMPakistan(PAK)OXMPanama(TPA)OXMPhilippines(GLB)OXMPhilippines(XTC)OXMPoland(XEO)OXMPoland(OPV)OXMPoland(PLS)OXMPoland(PRT)OXMPoland(TPL)OXMPortugal(MEO)OXMPortugal(TPH)OXMPortugal(TCL)OXMRomania(ROM)OXMRomania(COA)OXMRomania(ORO)OXMRomania(CNX)OXMRussia(SER)OXMSaudi Arabia(KSA)OXMSaudi Arabia(ACR)OXMSerbia(MSR)OXMSerbia(TOP)OXMSingapore(MM1)OXMSingapore(XSP)OXMSingapore(SIN)OXMSingapore(STH)OXMSlovakia(ORX)OXMSlovakia(ORS)OXMSlovakia(TMS)OXMSlovenia(SIO)OXMSlovenia(MOT)OXMSlovenia(SIM)OXMSouth Africa(XFE)OXMSouth Africa(XFA)OXMSouth Africa(XFV)OXMSouth East Europe(SEE)OXMSpain(PHE)OXMSpain(XEC)OXMSpain(AMO)OXMSpain(ATL)OXMSri Lanka(SLK)OXMSweden(HTS)OXMSwitzerland(AUT)OXMSwitzerland(SWC)OXMThailand(THL)OXMThailand(MYM)OXMTrinidad and Tobago(EON)OXMTunisia(TUN)OXMTurkey(TUR)OXMUkraine(SEK)OXMUnited Arab Emirates(LYS)OXMUnited Arab Emirates(XSG)OXMUnited Kingdom(BTU)OXMUnited Kingdom(EVR)OXMUnited Kingdom(H3G)OXMUnited Kingdom(O2U)OXMUnited Kingdom(VOD)OXMUnknown(XNZ)OXMUzbekistan(CAC)OXMVietnam(XXV)OXM
These are the other Multi-CSC types available that may see new updates released at different times:
CountryProduct CodeMulti-CSCArgentina(ANC)OWEChile(CHE)OWECosta Rica(ICE)OWEDominican Republic(DOR)OWEJamaica(CWW)OWEUnknown(BAT)OWE
CountryProduct CodeMulti-CSCArgentina(ARO)OWOArgentina(CTI)OWOArgentina(UFN)OWOArgentina(PSN)OWOBolivia(BVO)OWOBrazil(ZTO)OWOBrazil(ZTA)OWOBrazil(ZTM)OWOBrazil(ZVV)OWOChile(CRC)OWOChile(CHL)OWOChile(CHT)OWOColombia(COL)OWOColombia(COO)OWOColombia(COM)OWOColombia(COB)OWODominican Republic(CDR)OWOEcuador(EBE)OWOEcuador(ECO)OWOGuatemala(PGU)OWOGuatemala(CGU)OWOMexico(IUS)OWOMexico(TMM)OWOMexico(TCE)OWOPanama(CPA)OWOParaguay(UPO)OWOParaguay(PSP)OWOParaguay(TGP)OWOPeru(PET)OWOPeru(PEO)OWOPeru(PNT)OWOPeru(SAM)OWOSouth America(NBS)OWOUnknown(BVT)OWOUnknown(MXO)OWOUruguay(UFU)OWOUruguay(CTU)OWO
Lastly, phones with these product codes do not currently share CSC with different countries:
CountryProduct CodeCSCIndonesia(XID)OLE
Click to expand...
Click to collapse
SM-F926B Official Firmware One UI 4 (Android 12) for Bangladesh (BKD) available?
annson08 said:
Latest firmware for the Galaxy Z Fold3
* The Next OTA Update changelog screenshot will be inserted here *
This is the latest ROM for Multi-CSC OXM and can be used for ALL CSC's mentioned in Multi-CSC OXM!
This is an official Samsung ROM so KNOX will not be triggered!
What's new:
* Next Update's changelog will be inserted here *
Model SM-F926B
Model name Galaxy Z Fold3
Country Multi-CSC OXM
Version Android 12
Changelist **
Build date **
Security Patch Level **
Multi-CSC OXM
PDA F926BXXS1BUL6
CSC F926BOXM1BUL5
Details for download with Frija:
View attachment 5498529
Unzip the archive and place the files in the designated slots in Odin 3.14.4
HOME_CSC_OXM -> data will stay intact
CSC_OXM -> device will reset to factory settings
* Software Information Screenshot will be inserted here *
Click to expand...
Click to collapse
SM-F926B Official Firmware One UI 4 (Android 12) for Bangladesh (BKD) available?
shaifullah.ahad said:
SM-F926B Official Firmware One UI 4 (Android 12) for Bangladesh (BKD) available?
Click to expand...
Click to collapse
Sorry as you have asked three times the link has locked and you must try again tomorrow
I have EUX as product code. Will the firmware work?
/CK
Café King said:
I have EUX as product code. Will the firmware work?
/CK
Click to expand...
Click to collapse
yes, just choose HOME CSC.
shaifullah.ahad said:
SM-F926B Official Firmware One UI 4 (Android 12) for Bangladesh (BKD) available?
Click to expand...
Click to collapse
just use HOME CSC, doesn't matter if it's BKD, MSP, EUX, EUR or else.
As long as you have a SM-F926B model, not U model.
annson08 said:
Latest firmware for the Galaxy Z Fold3
* The Next OTA Update changelog screenshot will be inserted here *
This is the latest ROM for Multi-CSC OXM and can be used for ALL CSC's mentioned in Multi-CSC OXM!
This is an official Samsung ROM so KNOX will not be triggered!
What's new:
* Next Update's changelog will be inserted here *
Model SM-F926B
Model name Galaxy Z Fold3
Country Multi-CSC OXM
Version Android 12
Changelist **
Build date **
Security Patch Level **
Multi-CSC OXM
PDA F926BXXS1BUL6
CSC F926BOXM1BUL5
Details for download with Frija:
Unzip the archive and place the files in the designated slots in Odin 3.14.4
HOME_CSC_OXM -> data will stay intact
CSC_OXM -> device will reset to factory settings
* Software Information Screenshot will be inserted here *
Click to expand...
Click to collapse
CSC : XID MSR and XSP are all the same, it gives in Friya some difference bul6 bul5 bul4 or bul 6 bul 4 bul4, but when installed, they are identical from decmeber 1th, with same baseband, build number and all.
I´ve the Fold 3 with DBT Eu Germany, can i flash the Build
SM-F926B_1_20211223115230_4zv7w7a7n9_fac
HOME_CSC_OXM_F926BOXM1BUL5 ?
I´m a little afraid
Gojira-r32 said:
CSC : XID MSR and XSP are all the same, it gives in Friya some difference bul6 bul5 bul4 or bul 6 bul 4 bul4, but when installed, they are identical from decmeber 1th, with same baseband, build number and all.
Click to expand...
Click to collapse
MSR and XSP are the same since they both belong in the same multi-CSC family. XID is different, don't get confused. PDA might be the same but contents may differ a little bit. To avoid getting bugs or errors, if you are going to flash firmware from a different multi-CSC, do not use HOME_CSC (this will result in a factory reset).
ShadowK10 said:
I´ve the Fold 3 with DBT Eu Germany, can i flash the Build
SM-F926B_1_20211223115230_4zv7w7a7n9_fac
HOME_CSC_OXM_F926BOXM1BUL5 ?
I´m a little afraid
Click to expand...
Click to collapse
Yes, as long as your current firmware and the new firmware you downloaded belongs to the same multi-CSC, you can use HOME_CSC.
i always use HOME csc
annson08 said:
MSR and XSP are the same since they both belong in the same multi-CSC family. XID is different, don't get confused. PDA might be the same but contents may differ a little bit. To avoid getting bugs or errors, if you are going to flash firmware from a different multi-CSC, do not use HOME_CSC (this will result in a factory reset).
Yes, as long as your current firmware and the new firmware you downloaded belongs to the same multi-CSC, you can use HOME_CSC.
Click to expand...
Click to collapse
Will this wipe the data on my phone？
fripSide-NY said:
Will this wipe the data on my phone？
Click to expand...
Click to collapse
That depends if you are flashing to a different multi-CSC.
If you are flashing to a different multi-CSC then you are required to use CSC instead of HOME_CSC. But if you're flashing to the same multi-CSC, then you just have to use HOME_CSC.
annson08 said:
HOME_CSC_OXM -> data will stay intact
CSC_OXM -> device will reset to factory settings
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
BeyondRom v1.1
Based on Android 13 A515FXXU6HWC7 firmware
Supported Devices: A515F only
ROM Features
<*>Supported devices: A515F only</*>
<*>Base OneUI 5.1 Android 13 A515FXXU6HWC7 Feb 2023 patch level</*>
<*>Stock Samsung kernel</*>
<*>CSC features: call recording, camera shutter sound menu, real time network speed in statusbar, etc)</*>
<*>Knox partially removed and ROM light debloated</*>
<*>Screenshots in secure apps allowed</*>
<*>Removed automatic encryption, vaultkeeper service</*>
<*>Few build.prop tweaks</*>
<*>Warning boot screen removed, custom boot animation</*>
<*>Automatic EFS backup</*>
<*>For Safetynet use kdrag0n patch v2.4.x-mod1.x</*>
Not working
<*>Some knox related apps: Samsung Pay, Samsung AutoFill</*>
Changelog v1.1
<*>Updated to the latest HWC7 FW
Fixes
<*> </*>
Credits
- John Wu for Magisk
- Mr. Waehere for CRB kitchen
- Yillie for A13 TWRP
- dutchman89 for the new boot animation
- Alan Thomas for sammy disarm script
Download Links
A515F BR11 HWC7 Link
A515F TWRP + patched vbmeta link
Installation procedure
IS MANDATORY TO BE ON ANDROID 13 FW BEFORE FLASHING BR 11 !!!
0) Backup ALL your important files to PC, ext drives, etc
1) Download and copy the latest BR ROM zip into your external storage or USB stick if you're on stock fw encrypted
2) Download HWC7 stock FW for your phone model using Frija or Samfw and unpack it on your PC
3) Boot in download mode (Vol Up + Vol Down + plug the USB cable connected already to PC) and load up Odin on PC
Don't use USB adapters otherwise you might get issues flashing FW in Odin
Turn off Auto Reboot in Odin
4) Select files BL, AP, CP & HOME_CSC (keep data)
**do not start flash yet
5) Download the attached twrp_vbmeta_a13.tar file
6) Add the above twrp + vbmeta patched.tar file into the USERDATA slot in Odin
7) Uncheck the auto reboot option in Odin and start the flashing
8) When flashing completes (keep usb plugged in !!!), hold Vol Down + Power buttons and then as soon as the screen goes black hold Vol Up + Power buttons to boot to recovery
*be warned first time you boot into recovery it will initialize and then reboot so just keep the buttons Vol Up + Power buttons pressed longer
**if you boot in stock FW, your data will be encrypted and you'll need to wipe your data before flashing BR 3.x
9) When you boot in TWRP, wipe your data if you're encrypted, flash BR 1.x zip, save aroma log and then reboot to system
10) After the first boot, install Magisk Manager if necessary; when you'll start Magisk Manager for the first time, reply with YES (agree to reboot) after MM have setup the root environment
*after reboot, go to Magisk Manager settings and toggle On Zygisk
10) Enjoy....
1. Backup to PC all your important files: documents, pictures, contacts, SMS, etc. BEFORE starting to flash anything
2. If you have issues booting the ROM, try the clean flash
3. To boot into TWRP you need to use a USB cable connected to PC (same for DL mode) or a USB stick
4. If you like my work, consider buying me a coffee (PayPal link)
Happy flashing good people !
reserved
thanks dev any screenshots
the rom is stock like ... no themes
starbucks2010 said:
View attachment 5847645
BeyondRom v1.0
Based on Android 13 A515FXXU5GWA2 firmware
Supported Devices: A515F only
ROM Features
<*>Supported devices: A515F only</*>
<*>Base OneUI 5.0 Android 13 A515FXXU5GWA2 Dec 2022 patch level</*>
<*>Stock Samsung kernel</*>
<*>CSC features: call recording, camera shutter sound menu, real time network speed in statusbar, etc)</*>
<*>Knox partially removed and ROM light debloated</*>
<*>Screenshots in secure apps allowed</*>
<*>Removed automatic encryption, vaultkeeper service</*>
<*>Few build.prop tweaks</*>
<*>Warning boot screen removed, custom boot animation</*>
<*>Automatic EFS backup</*>
<*>For Safetynet use kdrag0n patch v2.4.x-mod1.x</*>
Not working
<*>Some knox related apps: Samsung Pay, Samsung AutoFill</*>
Changelog v1.0
<*>Initial release
Fixes
<*> </*>
Credits
- John Wu for Magisk
- Mr. Waehere for CRB kitchen
- Yillie for A13 TWRP
- dutchman89 for the new boot animation
- Alan Thomas for sammy disarm script
Download Links
A515F BR10 HWA2 Link
Installation procedure
IS MANDATORY TO BE ON ANDROID 13 FW BEFORE FLASHING BR 10 !!!
0) Backup ALL your important files to PC, ext drives, etc
1) Download and copy the latest BR ROM zip into your external storage or USB stick if you're on stock fw encrypted
2) Download GWA2 stock FW for your phone model using Frija or Samfw and unpack it on your PC
3) Boot in download mode (Vol Up + Vol Down + plug the USB cable connected already to PC) and load up Odin on PC
Don't use USB adapters otherwise you might get issues flashing FW in Odin
Turn off Auto Reboot in Odin
4) Select files BL, AP, CP & HOME_CSC (keep data)
**do not start flash yet
5) Download the attached twrp_vbmeta_a13.tar file
6) Add the above twrp + vbmeta patched.tar file into the USERDATA slot in Odin
7) Uncheck the auto reboot option in Odin and start the flashing
8) When flashing completes (keep usb plugged in !!!), hold Vol Down + Power buttons and then as soon as the screen goes black hold Vol Up + Power buttons to boot to recovery
*be warned first time you boot into recovery it will initialize and then reboot so just keep the buttons Vol Up + Power buttons pressed longer
**if you boot in stock FW, your data will be encrypted and you'll need to wipe your data before flashing BR 3.x
9) When you boot in TWRP, wipe your data if you're encrypted, flash BR 1.x zip, save aroma log and then reboot to system
10) After the first boot, install Magisk Manager if necessary; when you'll start Magisk Manager for the first time, reply with YES (agree to reboot) after MM have setup the root environment
*after reboot, go to Magisk Manager settings and toggle On Zygisk
10) Enjoy....
1. Backup to PC all your important files: documents, pictures, contacts, SMS, etc. BEFORE starting to flash anything
2. If you have issues booting the ROM, try the clean flash
3. To boot into TWRP you need to use a USB cable connected to PC (same for DL mode) or a USB stick
4. If you like my work, consider buying me a coffee (PayPal link)
Happy flashing good people !
Click to expand...
Click to collapse
Where is twrp_vbmeta_a13.tar file ?
klavyeci said:
Where is twrp_vbmeta_a13.tar file ?
Click to expand...
Click to collapse
I attached the link to the file in the 1st post
starbucks2010 said:
View attachment 58476452) Download GWA2 stock FW for your phone model using Frija or Samfw and unpack it on your PC
Click to expand...
Click to collapse
Is the Product code of this software Australia XSA or CAU ?
Is CAU
this rom worked with Magisk 24.3 but got boot loop when using Magisk 25+. Sometime it auto turn on air plane mode then freeze.
do not use magisk after version 25206. I use 25206 and all is ok
you can add a mod for sound from two speakers. Dual speakers mod.
give me rom download link
shan134 said:
give me rom download link
Click to expand...
Click to collapse
why? don't you know to read?
maybe learning to ask in a nicer way would help you in the future
BR11 has been updated to the latest HWC7 FW Feb 2023 level.
Happy flashing good people !
Fantastic work.
Feb patch HWC7 .there is a problem with banking apps detecting root .
SafetyNet passed and apps is on denylist
Any idea where is the problem ?
starbucks2010 said:
Is CAU
Click to expand...
Click to collapse
New version used csc CAU?
SirMomen said:
Fantastic work.
Feb patch HWC7 .there is a problem with banking apps detecting root .
SafetyNet passed and apps is on denylist
Any idea where is the problem ?
Click to expand...
Click to collapse
Metoo, I wan't unroot
I am in Canada and I noticed my phone is on OWO (TPA), which is Panama. Never noticed that before. Anyways, what HWC7 rom can I use for this?
Koolboyvn said:
New version used csc CAU?
Click to expand...
Click to collapse
Hix, is XEO
vovanshtein said:
you can add a mod for sound from two speakers. Dual speakers mod.
Click to expand...
Click to collapse
Can you link the mod for the stereo sound? Sound quality really sucks compared to phones like the a53 with stereo capabilities.