comando fastboot bloqueado con bootloader desbloqueado ROM v10.3.5.0 Global - Xiaomi Mi Max 3 Questions & Answers

2186/5000
Hi. I have a Mi Max 3 that I just bought on Alixpress. I bought it at this distributor for two reasons. First because they usually come with the bootloader unlocked and second because it is cheaper. However, I have received an official Global ROM, which was immediately updated as soon as I turned on the smartphone after its configuration. I was updated to the MIUI Global 10.3.5.0 PEDMIXM version. By having the bootloader unlocked you could use the adb / fastboot tools from the PC with the options for developers activated and the USB debugger activated. I understand that with the latest versions of the Global ROM in this model you have activated Antirollback. I put it in fastboot mode and connected to the PC with the USB cable, I entered the command "fastboot boot twrp-3.3.1-0-nitrogen.img" (I made sure that the TWRP was the corresponding version, more conveniently "twrp-3.3. 1-0-nitrogen.img "). To my surprise, I got stuck without getting an answer for an indefinite period (I mean nothing). To exit the lock, press the power button. Then I wanted to find out what level of anti-rollback the ROM had with the order "fastboot getver anti". The exact same thing happened. In other words, it has some type of protection that blocks the "fastboot" command, but there is no way of knowing what protection the Global ROM is activated. In this way I have the bootloader unlocked but due to a protection that I don't know I cannot put the recovery and install another ROM.
To say that I tried a method that theoretically deactivates the anti-rollback that is "fastboot flash antiarbpass dummy.img".
The result is always the same block with no response. Also, you don't get any error messages that report what is happening. In adb mode it works without problems. Can you tell me what's going on? I presume that it is the ROM that was given that has some type of protection not yet cataloged. The cable and the tools used are more than proven. I did all this under Linux and then under Windows with the same result. Let's see if you can help me with this. By the way, if you want, I can make you a beta tester under Linux. Thanks and best regards.
Enviar comentarios
Historial
Traducións gardadas
Comunidade

Try this Tool:
https://www.xiaomitool.com/V2/
Twrp: orangefox-recovery-project

No me sirve
Creo que no me sirve. Gracias

Ya está resuelto
Era el puerto USB 3.0 de la placa base. Se me ocurrio usar una de los puertos USB 2.0 y sonó la flauta.
Lo digo por si alguien tiene el mismo problema.

Related

Unlock GT-S5570

hi.
i was wondering if there is a way to unlock my galaxy mini.
thanks
I'm also interested in how to unlock s5570
I'm interested too
I'm interested too
Can`t or won`t?
Please can anybody tell us if it is possible? Perhaps we can use the galaxy s method?
galaxy s method not working
i tried galaxy s method on galaxy s5570 (mini) and it's not working for me. it keeps telling me when i try step 1 that i have busybox problems. i also tried titanium backup to update my busybox and still not working. i am waiting for a solution. thx
1. install samsung kies on your PC for so that you have the galaxy mini's drivers installed.
2. google for SuperOneClick v1.9.1 and download it (sorry i do not have sufficient post count to post links) [note that superoneclick will trigger some antivirus, but from my experience it is safe]
3. make sure your galaxy mini is in USB debugging mode
4. connect your galaxy mini to your pc via USB cable. Do not turn on USB storage on your phone. Just connect your USB cable and leave it.
5. Run SuperOneClick and click on the 'root' button. Respond to any pop up accordingly.
6. reboot your phone and it should be rooted, check your app drawer for the 'superuser' app to confirm (if it's there, it's rooted)
Disclaimer: I will not be responsible for anything that happens on your phone during the rooting process. Please do it at your own risk. You can google it to check that SuperOneClick does work on galaxy mini for many users already. I have personally rooted my mum's galaxy mini using SuperOneClick last week.
*after rooting you can install AdFree from the android market to block irritating ads on free apps, especially angry birds. It will make angry birds run more smoothly.
hi
its ok the unlock? sombody tried?
Need tester for my root, plz pm me.
this method worked fine for me on my new S5570 / PDA 2.3.4
<remove space>
h t t p : / / forum.xda-developers.com / showpost.php?p=14158214&postcount=3
If people need samsungs unlocked. My friends can do it in a few days. From IMEI.
Or, I can try to see if there is another way for you guys. Just need a tester.
Hello all...
Super One Click root works fine for 2.2.1 Samsung GT-S5570 phone i personally tried for it...It uses a super forking method...people says that it is harmful for your phone but dnt mind...I also tried for 2.3.4 on the same piece...but need to wait a bit from developers...I will give u updates about this stuff...Thanks
you cannot unlock s5570 only rooting it.
ravi.ameer said:
Super One Click root works fine for 2.2.1 Samsung GT-S5570 phone i personally tried for it...It uses a super forking method...people says that it is harmful for your phone but dnt mind...I also tried for 2.3.4 on the same piece...but need to wait a bit from developers...I will give u updates about this stuff...Thanks
Click to expand...
Click to collapse
Root is not equivalent to unlock!!!
GT-S5570 network unlock
Deblocare network S5570 Samsung Galaxy Mini
Rootati tel-ul cu superoneclick, instalati superuser, terminal emulator. Cu terminal emulator executati urmatoarele comenzi:
su
dd if=/dev/block/stl5 of=/sdcard/stl5.rfs
Copiati in calculator fisierul stl5.rfs. Instalati MagicIso cu care deschideti stl5.rfs. In directorul MITS gasiti fisierul PERSO.txt. Deschideti cu notepad sau view cu dreapta mouse si veti gasi in partea de jos un cod din 8 cifre. Notati-l.
Deschideti terminal emulator si dati comanda:
su
dd if=/sdcard/stl5.rfs of=/dev/block/stl5
Dati restart. Lasati sa porneasca cu sim-ul original, dati restart.
Puneti sim-ul nou, porniti, va apare un ecran in care veti introduce cele 8 cifre. Aveti mare grija la introducere sa nu gresiti. Apare mesaj ca ati deblocat cu succes codul de retea.
Succes.
SAFE METHOD
Perhaps it is better practise to follow this road for getting the codes:
- adb shell
- su
- dd if=/dev/block/stl5 of=/sdcard/stl5.rfs
Then use ULTRAISO or similar to examine /sdcard/stl5.rfs as FAT16 image file.
mits/perso.txt.
Nonetheless, there's nothing special regarding VF Ro users or any other network carriers. I just followed these steps:
Code:
su
dd if=/dev/block/stl5 of=/sdcard/stl5.rfs
Copied the stl5.rfs on my computer, opened it up with WinImage (obviously, any other application that can read FAT images would work just as good) and went to /mits/perso.txt.
It's full of gibberish, but do keep in mind that the 8-digit number is the unlock code. Note it down on a paper or something, power down the phone, get its sim out, power it on (don't insert any other sim). Mine went to ARM11 recovery mode (shows the samsung logo and says that on the top left). Should it do that, just throw the battery out and back in, then power it up again. The phone will boot up normally and now run
Code:
su
dd if=/sdcard/stl5.rfs of=/dev/block/stl5
wait for it to end, power down the phone, insert a sim that would send the phone in its network locked mode, and se that 8-digit number. That's all about it, you now have an unlocked phone.
any unlock method?
i am still waiting for a solution for my galaxy s mini to unlock it. thx
there is no safe free way to unlock that phone... you have a couple of options to unlock it to all networks..
1 get code from your provider
2 buy unlock code from some code site
3 unlock phone via original micro-usb cable at www.UnlockSamsungOnline.nl
4 unlock phone via some servicebox
5 go to gsm shop and get it unlocked there
as you only have one phone i think option 3 is best for you.
Actually there is a free and safe way,btud63 just told us in this page,for me it worked the first part in Romanian language,but the second part in English is kind of same thing.
So if you are not able to do that i will translate to you again from Romanian.
btud63 said:
Deblocare network S5570 Samsung Galaxy Mini
Rootati tel-ul cu superoneclick, instalati superuser, terminal emulator. Cu terminal emulator executati urmatoarele comenzi:
su
dd if=/dev/block/stl5 of=/sdcard/stl5.rfs
Copiati in calculator fisierul stl5.rfs. Instalati MagicIso cu care deschideti stl5.rfs. In directorul MITS gasiti fisierul PERSO.txt. Deschideti cu notepad sau view cu dreapta mouse si veti gasi in partea de jos un cod din 8 cifre. Notati-l.
Deschideti terminal emulator si dati comanda:
su
dd if=/sdcard/stl5.rfs of=/dev/block/stl5
Dati restart. Lasati sa porneasca cu sim-ul original, dati restart.
Puneti sim-ul nou, porniti, va apare un ecran in care veti introduce cele 8 cifre. Aveti mare grija la introducere sa nu gresiti. Apare mesaj ca ati deblocat cu succes codul de retea.
Succes.
SAFE METHOD
Perhaps it is better practise to follow this road for getting the codes:
- adb shell
- su
- dd if=/dev/block/stl5 of=/sdcard/stl5.rfs
Then use ULTRAISO or similar to examine /sdcard/stl5.rfs as FAT16 image file.
mits/perso.txt.
Nonetheless, there's nothing special regarding VF Ro users or any other network carriers. I just followed these steps:
Code:
su
dd if=/dev/block/stl5 of=/sdcard/stl5.rfs
Copied the stl5.rfs on my computer, opened it up with WinImage (obviously, any other application that can read FAT images would work just as good) and went to /mits/perso.txt.
It's full of gibberish, but do keep in mind that the 8-digit number is the unlock code. Note it down on a paper or something, power down the phone, get its sim out, power it on (don't insert any other sim). Mine went to ARM11 recovery mode (shows the samsung logo and says that on the top left). Should it do that, just throw the battery out and back in, then power it up again. The phone will boot up normally and now run
Code:
su
dd if=/sdcard/stl5.rfs of=/dev/block/stl5
wait for it to end, power down the phone, insert a sim that would send the phone in its network locked mode, and se that 8-digit number. That's all about it, you now have an unlocked phone.
Click to expand...
Click to collapse
Hi all.
I used this method from the terminal of my running gt-5570.
I know this is the wrong method because we need to be connected in restore mode with adb to do that.
Now my phone don't boot (boot loop in the first samsung logo)
i still have access to download mode , to emergency dload mode and to ram dump mode.
I tried to reflash with odin several times and with several roms but no success.loop boot won't go.
I think that i damaged efs , i have a backup but i don't know how to recover it with odin.
Any idea?
(i don't have the phone bill so samsung won't repare it)
Thank you.

Emergency recovery hell.............

Got my S9 stuck in the "An Error has occurred while updating software. Use Emergency recovery function in Smart Switch PC software" Smart switch wants a recovery code? Never used it or tried to use it until now.
Any chance I can fix this or is this a paper weight that will light up?
start in download mode and flash the latest firmware corresponding to your model.
angel8502 said:
start in download mode and flash the latest firmware corresponding to your model.
Click to expand...
Click to collapse
Nothing I do will let me get into download mode. Power+Bixby and Volume down just brings back to the screen.
Lord_BB said:
Nothing I do will let me get into download mode. Power+Bixby and Volume down just brings back to the screen.
Click to expand...
Click to collapse
Keep those buttons pressed until the phone reboots twice, see if the second boot enters DL mode
*Detection* said:
Keep those buttons pressed until the phone reboots twice, see if the second boot enters DL mode
Click to expand...
Click to collapse
So I held the 3 buttons, it quick vibrated and then gave the screen where you volume up to get into DL mode....let reboot again and this hit the volume up and still no DL mode.
Lord_BB said:
So I held the 3 buttons, it quick vibrated and then gave the screen where you volume up to get into DL mode....let reboot again and this hit the volume up and still no DL mode.
Click to expand...
Click to collapse
You are trying this with the phone powered off aren't you?
Lord_BB said:
So I held the 3 buttons, it quick vibrated and then gave the screen where you volume up to get into DL mode....let reboot again and this hit the volume up and still no DL mode.
Click to expand...
Click to collapse
So you can get to the first stage of DL mode where it asks you to press Vol up to continue, and when you press Volume up it reboots the phone?
If that is the case you have a problem as Download mode is nothing to do with firmware, it is hard coded, if that's corrupted you'll be needing to send it off for repair I'd think
Wait... What?!? Did i read you right?
From the error screen, what you did was hold vol - home and power. Until you saw screen saying vol up to enter dl mode, but then you kept holding until it rebooted again back too the error, and pressing up their does nothing?
If thats all right, you messed upp.....
Next time, as soon as you get to the screen thay says press vol + the enter dl mode, release everything, wait 5 secs and then press vol + like it says and should enter dl mode normally and you can flash with Odin....
If it wont enter dl mode from that screen, you have seriois issue, but it will never go from the error screen, you just need to hold the buttons on restart from the error to get into dlmode again
Jist an addon: some times ive noticed on some devices, when your at the download mode screen trying to press vol + to enter, somtimes you need to click it a few times for it to grab it, ive had it not work on one oress but work after 3 or 4 repeared ones... Could be sticky buttons but just saying
Lord_BB said:
Got my S9 stuck in the "An Error has occurred while updating software. Use Emergency recovery function in Smart Switch PC software" Smart switch wants a recovery code? Never used it or tried to use it until now.
Any chance I can fix this or is this a paper weight that will light up?
Click to expand...
Click to collapse
Were u able to fix it
I got the same problem 2 days back
Were u flashing with odin ?
I have fixed the problem already
bunnykons said:
Were u able to fix it
I got the same problem 2 days back
Were u flashing with odin ?
Click to expand...
Click to collapse
I am not an expert but the next thing you will read is what worked with my phone
The model is SM-9600 Galaxy s9 from Mexico with Telcel carrier. I was trying to flash a stock firmware without bloatware so in the middle of the process with odin, something went wrong and FAIL appeared. I got scared and look in every blog but no answer.
Instrucciones en Español abajo.
What it worked for me was:
1.- Download the Smart Switch for PC and update the software if it makes you the require, I think the problem was with the drivers.
2.- Press VOL -, Bixby and Power, you'll get the first screen of DL mode.
3.- Pess VOL+; you will get the Error screen. (You leave it like that)
4.- Run ODIN, and load all the files AP,BL, CP, CSC (you previouly have to download the firmware for you phone. I used Sammobile).
5.- Connect you phone with your PC.
6.- Press Start in ODIN and the cell will be detected and the flash will start and finish in the correct way in the upper left corner with red letters will appear a notice that says "FRP Unlocked" and other stuff.
I Hope this works for you too.
GOOD LUCK:good:
Que tal compañeros que hablan español.
Aquí les va un poco de contexto. Mi telefono es un Galaxy S9 SM-9600, de México y con Telcel. Mi intención era flashear un firmware que estuviera de libre de bloatware de Telcel, así que bajé la versión MXO de Sammobile.
Este proceso ya lo había hecho anteriormente con un Galaxy S6 y recientemente con un Galaxy J6 utilizando la herramienta ODIN.
Todo iba bien hasta que a mitad del proceso algo salió mal y me apareció el letrero de FAIL y se reinició el celular y me salio la infame pantalla de ERROR.
Lo que me funcionó fue lo siguiente.
1.- Descargue Smart Swithc para PC. y lo instale y lo actualicé como me pidió el programa. (Al parecer el problema fueron los controladores del teléfono.
2.- Con el celular desconectado de la PC, presioné los botones de Bixby, VOL - y Power al mismo tiempo. hasta que me apareció la primer pantalla del DL Mode.
3.- Presioné el botón Vol + y vuelve aparecer la pantalla de error (no importa así déjala)
4.-En el programa ODIN cargué los paquetes que vienen con el firmware, AB, BL, CP y CSC.
5.- Conecté el Celular a la PC y le dí Start a ODIN, en ese momento mi celular fue detectado por ODIN y en la pantalla del celular, en la parte superior izquierda sale la leyenda con letras rojas "FRP Unlocked" y dice algo mas pero no recuerdo y entonces comenzó a realizar el Flash del Firmware sin problemas.
Espero que les funcione también.
Buena Suerte. :good:
Thanks and this worked for me
Odin frozen 75% through flash
frickin_boy said:
*edited down to just instructions by Z1stCNTRYdgtlBOY
1.- Download the Smart Switch for PC and update the software if it makes you the require, I think the problem was with the drivers.
2.- Press VOL -, Bixby and Power, you'll get the first screen of DL mode.
3.- Pess VOL+; you will get the Error screen. (You leave it like that)
4.- Run ODIN, and load all the files AP,BL, CP, CSC (you previouly have to download the firmware for you phone. I used Sammobile).
5.- Connect you phone with your PC.
6.- Press Start in ODIN and the cell will be detected and the flash will start and finish in the correct way in the upper left corner with red letters will appear a notice that says "FRP Unlocked" and other stuff.
Click to expand...
Click to collapse
I tried to root my SM-G960F/DS following the updated instructions from https://highonandroid.com/android-smartphones/how-to-root-galaxy-s9-or-s9-plus-exynos-supersu/ and got stuck in boot loop (sorry, new user so I can't post hyperlinks yet).
I re-entered download mode, updated to all the latest versions of twrp (3.2.3-0), no-verify-opt-encrypt (6.0), samsung-antiroot-removal (2.4), G965_PIE_Root_for_OEM_issue_devices (5), and Magisk (18.0), but ran into the same bootloop problem.
I then tried to reload samsung's stock 9.0 through smart_switch, but it wouldn't recognize my device. When I enter Emergency Software Recover, the only option it gives me is to recover using a recovery code.
Finally, I tried the instructions above from frickin_boy, but the flash stopped after ~75% completion. This is as far as I can get with it, regardless of which version of the samsung stock I try to flash. Can anyone help me with this?
Had this happen to my s9. Booted only into emergency mode with smartswitch instructions. Smartswitch didn't work wouldn't take my serial number. While it's in emergency mode Odin will work.
quikt said:
Had this happen to my s9. Booted only into emergency mode with smartswitch instructions. Smartswitch didn't work wouldn't take my serial number. While it's in emergency mode Odin will work.
Click to expand...
Click to collapse
Just gave it a go from emergency mode instead of download mode. I was able to connect to Odin as you said, but it still stalled out at ~75% complete.
It may be worth trying same steps but with a different official odin firmware. Oreo or pie
I couldn't get any of the previous versions of Odin to work. But I was able to find the 14 Feb version of the firmware (instead of 14 Jan from SamMobile), which flashed correctly.
Latest firmware: https://forum.xda-developers.com/galaxy-s9-plus/how-to/official-stock-firmware-thread-samsung-t3764479
HELPP
Hi
I would like to know how you fixed it. i wanted to flash a rom and it got stucked at "Use the Emergency recovery function in the Smart Switch PC software.". i tried the following instruction but it says "Unsupported device"
HELPPP
apparently odin still works when in emergency recovery mode.. (just like in download mode). So use odin to reinstall.
any ideas on preventing auto reboot every 15 seconds? I got it through the flashing process earlier today, but since the last fail it won't stay on for long enough to flash anything else. I put both the CSC and HOME_CSC file into odin (HOME_CSC in CSC slot, CSC in CP slot..) and it got hung up 3/4 of the way through for a really long time (like at least an hour, likely more), so I cancelled it and tried again which came back failed. Prior to this the message was that it wouldn't run with unauthorized firmware (it had stock firmware, I just did a reset) and now it says to use the emergency recovery. Emergency recovery both doesn't recognize it and also it won't stay on long enough to use anyway. I can sometimes get download mode but it reboots regardless. If it isn't plugged in though, the screen flashes for a fraction of a second but won't turn on. Any help is greatly appreciated!
thecirclethinker said:
any ideas on preventing auto reboot every 15 seconds? I got it through the flashing process earlier today, but since the last fail it won't stay on for long enough to flash anything else. I put both the CSC and HOME_CSC file into odin (HOME_CSC in CSC slot, CSC in CP slot..) and it got hung up 3/4 of the way through for a really long time (like at least an hour, likely more), so I cancelled it and tried again which came back failed. Prior to this the message was that it wouldn't run with unauthorized firmware (it had stock firmware, I just did a reset) and now it says to use the emergency recovery. Emergency recovery both doesn't recognize it and also it won't stay on long enough to use anyway. I can sometimes get download mode but it reboots regardless. If it isn't plugged in though, the screen flashes for a fraction of a second but won't turn on. Any help is greatly appreciated!
Click to expand...
Click to collapse
Did you ever get this issue resolved?? I have the same exact issue with an S7 that was bricked during an odin firmware installation. I've also been looking for an older version of Samsung SmartSwitch. I believe a version older than 4.xx might allow for a specific model in the emergency recovery setup parameters instead of autodetect. Can anyone find that older software?

[Tutorial] How to get 4G LTE on LENOVO Z6 PRO

This is my first Post and... I'll try to be very specific.
Reading the post of benjieb https://forum.xda-developers.com/android/development/z6-pro-official-chinese-stock-rom-t3969815
I read 3 things that the post is not explaining
FIRST: He's not explaining how to get edl via adb.
SECOND: That Android 10 is ready for the Lenovo z6 pro.
THIRD: U can change the launcher, I post all this things one by one.
In first time, this post is for the users that haven't any problem to get android only in English.
Why?
Because, the last TWO updates turn on 4G LTE, making that QPST and QXDM go to the sh..t
And... lets go.
How to get EDL via adb.
Install DRIVERS AND QPST, restart your pc.
Activate USB DEBUGGING, I think that this is not necessary to explain.
Connect your phone to the PC, preferably in the left usb hub.
Go to Shell, and run like Administrator, then type adb reboot edl and press Enter.
Automatically the phone screen will dim as dead, it's a sign of your phone has gone into EDL Mode.
Your pc, recognise the EDL MODE and install the CHINESE ROM via QPST.
I use this post to get my actual rom:
https://forum.xda-developers.com/android/help/rom-lenovo-z6-pro-l78051-qpst-edl-t3947149
IF ALL IS GOOD YOU HAVE THE CHINESE ROM AND ONLY HAVE ENGLISH LANGUAGE.
I don't recommend install MoreLocale app, trust me, THE PHONE DOESN'T RESPONSE.
NOW, THIS IS THE MOST EASY.
Only install all the update, one by one, and, the last two have:
FIRST: ANDROID 10, THIS HAVE MORE OR LESS 1.7 Gb.
SECOND: READING THE POST ON https://club.lenovo.com.cn/thread-5667292-1-1.html THE LAST UPDATE REPAIR 150 APN CARRIERS.
GOOD, THIS IS NOT A REALLY TUTORIAL, BUT IF YOU WANT TO GET 4G LTE YOU NEED DO THIS.
SORRY, DON'T FORGET.
To lockback your Bootloader, you only need:
Donwload this .rar archive, this contain the only platform-tools, that lockback the bootloader, another one doesn't work, sorry.
https://mega.nz/#!PQpFlCCT!_IgGEUkXCAgEjqai1hH2JcQxgbp8fcPPzy8cw2r8CuY
EXTRACT THE CARPET AND RUN POWER SHELL IN THE CARPET, PRESS SHIFT + RIGHT BUTTON AND SELECT POWER SHELL
Now type:
cmd
adb devices
adb fastboot reboot
(and wait your phone restart in fastboot mode, don't disconnect your phone from the pc and don't forget that USB DEBBUGING must be on)
Type:
fastboot flashing lock
check your phone and read, select the option that says, yes,lock bootloader.
this change with volume button and select with power button.
Good luck for everyone, i'm from Mexico, and this steps, turn me on 4G LTE for all the carriers that i have here.
Remember that SD 855 ON THIS TERMINAL IS NOT COMPATIBLE WITH DIAG MODE, THIS IS THE REASON THAT YOU CAN'T UNLOCK 4G LTE VIA QPST AND QXDM.
TO CHANGE THE LAUNCHER ONLY DOWNLOAD NOVA LAUNCHER,
OPEN THE APP AND GO TO THE SETTINGS,
IN THE SETTINGS THE APP SAYS THAT ISN'T THE APP BY DEFAULT, ONLY SELECT YOUR LAUNCHER FOR ALWAYS.
DONT YOU WORRY FOR U-TOUCH, IT'S WORK.
I HAVE IMAGES, BUT I DON'T HAVE HOW TO UPLOAD ON MY POST.
https://mega.nz/#!OZBiCQqS!2U_5olVQz8ohFmzr9DyshVzYMVpD_bj9PVKKizW_sj4
https://mega.nz/#!HYAyTK5S!l_T4Wnmjg-uBVsU5eX8c_sHd4xGfwG2HWgnQFxldAXs
For the lockback users.
Remember that lock the bootloader, format all data and cache, make a backup and
this is the best way to hide the previous unlock, since trying again requires the unlock file.
kO0k3 said:
This is my first Post and... I'll try to be very specific.
Reading the post of benjieb https://forum.xda-developers.com/android/development/z6-pro-official-chinese-stock-rom-t3969815
I read 3 things that the post is not explaining
...
Click to expand...
Click to collapse
:laugh:
Now that is an odd intro !
Man, my thread is now fairly old and is only meant to help anyone interested in moving to CN rom.
I am not really interesting at what you say, but at least the second thing I miss on android 10 is total crap!
Quote from my thread: "11.5.229 (Android 10) released mid-January ; it is now a very stable beta release, I use it daily and it works great."
Please reword your post, and do not mention my name ! This is no place to be disrespectful.
benjieb said:
:laugh:
Now that is an odd intro !
Man, my thread is now fairly old and is only meant to help anyone interested in moving to CN rom.
I am not really interesting at what you say, but at least the second thing I miss on android 10 is total crap!
Quote from my thread: "11.5.229 (Android 10) released mid-January ; it is now a very stable beta release, I use it daily and it works great."
Please reword your post, and do not mention my name ! This is no place to be disrespectful.
Click to expand...
Click to collapse
kO0k3 said:
This is my first Post and... I'll try to be very specific.
Reading the post of benjieb https://forum.xda-developers.com/android/development/z6-pro-official-chinese-stock-rom-t3969815
I read 3 things that the post is not explaining
FIRST: He's not explaining how to get edl via adb.
SECOND: That Android 10 is ready for the Lenovo z6 pro.
THIRD: U can change the launcher, I post all this things one by one.
In first time, this post is for the users that haven't any problem to get android only in English.
Why?
Because, the last TWO updates turn on 4G LTE, making that QPST and QXDM go to the sh..t
And... lets go.
How to get EDL via adb.
Install DRIVERS AND QPST, restart your pc.
Activate USB DEBUGGING, I think that this is not necessary to explain.
Connect your phone to the PC, preferably in the left usb hub.
Go to Shell, and run like Administrator, then type adb reboot edl and press Enter.
Automatically the phone screen will dim as dead, it's a sign of your phone has gone into EDL Mode.
Your pc, recognise the EDL MODE and install the CHINESE ROM via QPST.
I use this post to get my actual rom:
https://forum.xda-developers.com/android/help/rom-lenovo-z6-pro-l78051-qpst-edl-t3947149
IF ALL IS GOOD YOU HAVE THE CHINESE ROM AND ONLY HAVE ENGLISH LANGUAGE.
I don't recommend install MoreLocale app, trust me, THE PHONE DOESN'T RESPONSE.
NOW, THIS IS THE MOST EASY.
Only install all the update, one by one, and, the last two have:
FIRST: ANDROID 10, THIS HAVE MORE OR LESS 1.7 Gb.
SECOND: READING THE POST ON https://club.lenovo.com.cn/thread-5667292-1-1.html THE LAST UPDATE REPAIR 150 APN CARRIERS.
GOOD, THIS IS NOT A REALLY TUTORIAL, BUT IF YOU WANT TO GET 4G LTE YOU NEED DO THIS.
SORRY, DON'T FORGET.
To lockback your Bootloader, you only need:
Donwload this .rar archive, this contain the only platform-tools, that lockback the bootloader, another one doesn't work, sorry.
https://mega.nz/#!PQpFlCCT!_IgGEUkXCAgEjqai1hH2JcQxgbp8fcPPzy8cw2r8CuY
EXTRACT THE CARPET AND RUN POWER SHELL IN THE CARPET, PRESS SHIFT + RIGHT BUTTON AND SELECT POWER SHELL
Now type:
cmd
adb devices
adb fastboot reboot
(and wait your phone restart in fastboot mode, don't disconnect your phone from the pc and don't forget that USB DEBBUGING must be on)
Type:
fastboot flashing lock
check your phone and read, select the option that says, yes,lock bootloader.
this change with volume button and select with power button.
Good luck for everyone, i'm from Mexico, and this steps, turn me on 4G LTE for all the carriers that i have here.
Remember that SD 855 ON THIS TERMINAL IS NOT COMPATIBLE WITH DIAG MODE, THIS IS THE REASON THAT YOU CAN'T UNLOCK 4G LTE VIA QPST AND QXDM.
TO CHANGE THE LAUNCHER ONLY DOWNLOAD NOVA LAUNCHER,
OPEN THE APP AND GO TO THE SETTINGS,
IN THE SETTINGS THE APP SAYS THAT ISN'T THE APP BY DEFAULT, ONLY SELECT YOUR LAUNCHER FOR ALWAYS.
DONT YOU WORRY FOR U-TOUCH, IT'S WORK.
I HAVE IMAGES, BUT I DON'T HAVE HOW TO UPLOAD ON MY POST.
https://mega.nz/#!OZBiCQqS!2U_5olVQz8ohFmzr9DyshVzYMVpD_bj9PVKKizW_sj4
https://mega.nz/#!HYAyTK5S!l_T4Wnmjg-uBVsU5eX8c_sHd4xGfwG2HWgnQFxldAXs
Click to expand...
Click to collapse
Es mejor y más sencillo bajar el archivo para qfil y ejecutarlo como tal. Bajas la actualización más reciente que es la 11.5.334 flasheas y te olvidas de estar actualizando una por una en OTA, y después si quieres la ROM global la flasheas de igual manera por qfil, así le hice yo y tengo 4G también en México.

Samsung A30s/SM-A307FN TWRP and ROOT

Hi guys this is how to make twrp for Samsung a30s and root it.
this method is working with all versions from android 9 to 11 tested
i didn't test it on sm-a307gn / u / f
but i think it will work
first you need to unlock your bootloader
( that will wipe your device so be sure to backup of your data )
WARRNING YOUR WARRNTY WILL BE VOID
Enable Developer Options: go to Settings -> About device. Tap 7 times on Build number to enable Developer options.
Enable OEM unlock and USB debugging options ( Settings -> Developer options )
Download and Install Samsung Mobile Phone Drivers ( ignore this if you have installed it ) Drivers Download
Enter Download Mode ( Connected USB Cable to PC, Turn Power off the phone, Press and hold Volume Down + Volume Up keys together then while pressing these keys connecting the phone to PC with USB Cable Data, release all keys when Download Mode appears ).
In Download Mode you see the long press Vol Up option to enter Device Unlock Mode. Unlock the bootloader ( that will wipe your device so be sure to backup of your data )
After Bootloader unlock, the phone will reboot and make sure the phone connected to the internet
now repeat (1) and go to devolper options you will found that OEM unlock is checked with gray and you cannot change it
now your bootloader will be unlocked successfully .
( if you want to lock the bootloader again do the same instrecouns )
now download odin from here
before flashing check odin options and uncheck the Auto Reboot
reboot your device into download mode again and flash this TWRP Like this
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
after flash is done now hold the volum down and power for a 7 sec when the screan go black realese the voulm down and press volum up with power button for 3 sec after this reales the power and still pressing on voulm up until the device boot into twrp
now be carfull with me first go to wipe and press on format data and type yes
now go home and press on mount
and connect usb to you PC and download this files ROOT Files after extracting the files copy them to the Internal Storage
now first flash multidisabler-samsung-3.1.zip
then flash Magisk-v23.0.zip
then reboot to your system
you will need to setup you device offline then after finishing setting the device connect to internet and open Magisk it will download and install then open the app it will show you to complete the instalition by reboot agree then your phone will reboot
now your device is rooted succefully
password for all files : B0gy09
pleas support me it's my first post and i post about this becouse it was so hard to found this files and make this device rooted succefully and if there any bugs pleas contact me
Whatsapp : +201151025596
Telegram : +201151025596
Facebook : bogy09
Instagram : mostafaasalemm
@mostafasalem423 THREAD CLOSED.
Please advise the moderators team (best via the report function) to re-open your thread when ready to provide links to a different filehost.
Regards
Oswald Boelcke
Senior Moderator
mostafasalem423 said:
Hi guys this is how to make twrp for Samsung a30s and root it.
this method is working with all versions from android 9 to 11 tested
i didn't test it on sm-a307gn / u / f
but i think it will work
first you need to unlock your bootloader
( that will wipe your device so be sure to backup of your data )
WARRNING YOUR WARRNTY WILL BE VOID
Enable Developer Options: go to Settings -> About device. Tap 7 times on Build number to enable Developer options.
Enable OEM unlock and USB debugging options ( Settings -> Developer options )
Download and Install Samsung Mobile Phone Drivers ( ignore this if you have installed it ) Drivers Download
Enter Download Mode ( Connected USB Cable to PC, Turn Power off the phone, Press and hold Volume Down + Volume Up keys together then while pressing these keys connecting the phone to PC with USB Cable Data, release all keys when Download Mode appears ).
In Download Mode you see the long press Vol Up option to enter Device Unlock Mode. Unlock the bootloader ( that will wipe your device so be sure to backup of your data )
After Bootloader unlock, the phone will reboot and make sure the phone connected to the internet
now repeat (1) and go to devolper options you will found that OEM unlock is checked with gray and you cannot change it
now your bootloader will be unlocked successfully .
( if you want to lock the bootloader again do the same instrecouns )
now download odin from here
before flashing check odin options and uncheck the Auto Reboot
reboot your device into download mode again and flash this TWRP Like this
View attachment 5359197
after flash is done now hold the volum down and power for a 7 sec when the screan go black realese the voulm down and press volum up with power button for 3 sec after this reales the power and still pressing on voulm up until the device boot into twrp
now be carfull with me first go to wipe and press on format data and type yes
View attachment 5359199View attachment 5359201
now go home and press on mount
View attachment 5359203
and connect usb to you PC and download this files ROOT Files after extracting the files copy them to the Internal Storage
now first flash multidisabler-samsung-3.1.zip
then flash Magisk-v23.0.zip
then reboot to your system
you will need to setup you device offline then after finishing setting the device connect to internet and open Magisk it will download and install then open the app it will show you to complete the instalition by reboot agree then your phone will reboot
now your device is rooted succefully
password for all files : B0gy09
pleas support me it's my first post and i post about this becouse it was so hard to found this files and make this device rooted succefully and if there any bugs pleas contact me
Whatsapp : +201151025596
Telegram : +201151025596
Facebook : bogy09
Instagram : mostafaasalemm
Click to expand...
Click to collapse
Hi I had SM 307GN/DS Samsung with Android 11, I'll try it. Thank you brother.
mostafasalem423 said:
Hi guys this is how to make twrp for Samsung a30s and root it.
this method is working with all versions from android 9 to 11 tested
i didn't test it on sm-a307gn / u / f
but i think it will work
first you need to unlock your bootloader
( that will wipe your device so be sure to backup of your data )
WARRNING YOUR WARRNTY WILL BE VOID
Enable Developer Options: go to Settings -> About device. Tap 7 times on Build number to enable Developer options.
Enable OEM unlock and USB debugging options ( Settings -> Developer options )
Download and Install Samsung Mobile Phone Drivers ( ignore this if you have installed it ) Drivers Download
Enter Download Mode ( Connected USB Cable to PC, Turn Power off the phone, Press and hold Volume Down + Volume Up keys together then while pressing these keys connecting the phone to PC with USB Cable Data, release all keys when Download Mode appears ).
In Download Mode you see the long press Vol Up option to enter Device Unlock Mode. Unlock the bootloader ( that will wipe your device so be sure to backup of your data )
After Bootloader unlock, the phone will reboot and make sure the phone connected to the internet
now repeat (1) and go to devolper options you will found that OEM unlock is checked with gray and you cannot change it
now your bootloader will be unlocked successfully .
( if you want to lock the bootloader again do the same instrecouns )
now download odin from here
before flashing check odin options and uncheck the Auto Reboot
reboot your device into download mode again and flash this TWRP Like this
View attachment 5359197
after flash is done now hold the volum down and power for a 7 sec when the screan go black realese the voulm down and press volum up with power button for 3 sec after this reales the power and still pressing on voulm up until the device boot into twrp
now be carfull with me first go to wipe and press on format data and type yes
View attachment 5359199View attachment 5359201
now go home and press on mount
View attachment 5359203
and connect usb to you PC and download this files ROOT Files after extracting the files copy them to the Internal Storage
now first flash multidisabler-samsung-3.1.zip
then flash Magisk-v23.0.zip
then reboot to your system
you will need to setup you device offline then after finishing setting the device connect to internet and open Magisk it will download and install then open the app it will show you to complete the instalition by reboot agree then your phone will reboot
now your device is rooted succefully
password for all files : B0gy09
pleas support me it's my first post and i post about this becouse it was so hard to found this files and make this device rooted succefully and if there any bugs pleas contact me
Whatsapp : +201151025596
Telegram : +201151025596
Facebook : bogy09
Instagram : mostafaasalemm
Click to expand...
Click to collapse
Is it require the Magisk Manager first to installed??
realizar todos los pasos en mi a30s 307g y el root es un éxito, pero tengo un problema con la sim car, la señal solo me dura unos segundos y se va y luego regresa asi todo el tiempo, no puedo hacer llamadas porque se me cortan , todo lo demás funciona bien
Traducido por GT: Hice todos los pasos en mi a30s 307g y la raíz es exitosa, pero tengo un problema con el sim car, la señal solo dura unos segundos y desaparece y luego vuelve así todo el tiempo. , No puedo hacer llamadas porque se me cortan, todo lo demás funciona bien
TWRP link Didn't WORK,,pls fix it
works great! Thanks
Omor_Faruk said:
TWRP link Didn't WORK,,pls fix it
Click to expand...
Click to collapse
It's working man
[email protected] said:
Is it require the Magisk Manager first to installed??
Click to expand...
Click to collapse
No not require any thing on your phone
[email protected] said:
Hi I had SM 307GN/DS Samsung with Android 11, I'll try it. Thank you brother.
Click to expand...
Click to collapse
Did it work for you ?
Terrorduanra420 said:
works great! Thanks
Click to expand...
Click to collapse
I have a307fn btw
I have have a A307FN, and ive run into an issue after installing TWRP. Everything went fine during install, but after booting the phone I noticed the phone was constantly losing cell signal and mobile data connection. I had to revert back to stock as I was unable to resolve the issue. Has anyone came across this problem, or was it something i did wrong?
Works perfectly! Thanks for the detailed instructions!
Terrandroid said:
I have have a A307FN, and ive run into an issue after installing TWRP. Everything went fine during install, but after booting the phone I noticed the phone was constantly losing cell signal and mobile data connection. I had to revert back to stock as I was unable to resolve the issue. Has anyone came across this problem, or was it something i did wrong?
Click to expand...
Click to collapse
Contact me on messenger i will help you
Terrandroid said:
I have have a A307FN, and ive run into an issue after installing TWRP. Everything went fine during install, but after booting the phone I noticed the phone was constantly losing cell signal and mobile data connection. I had to revert back to stock as I was unable to resolve the issue. Has anyone came across this problem, or was it something i did wrong?
Click to expand...
Click to collapse
Same problem here
You have to make sure that you activate usb dumping and oem unlock
Root
Hello
My phone is Samsung A30S SAM-A307fn
I rooted the phone exactly according to the steps.
But the problem is that the SIM cards are disconnected and connected every 2 minutes.
danteaurus said:
realizar todos os passos em mi a30s 307g y el root es un éxito, pero tengo un problem con la sim car, la señal solo me dura unos segundos y se va y luego regresa asi todo el tiempo, no puedo hacer llamadas porque se me cortan , todo lo demás funciona bem
Traducido por GT: Hice todos los los pasos en mi a30s 307g y la raíz es exitosa, pero tengo un problema con el sim car, la señal solo dura unos segundos e desaparece y luego vuelve así todo el tiempo. , No puedo hacer llamadas porque se me cortan, todo lo demás funciona bien
Click to expand...
Click to collapse
Estou com o mesmo problema, você conseguiu resolver?
Mod translation via GT: I have the same problem, did you manage to solve it?
Bro tell me that No Need to Flash any AP file ? Means Flash Firmware no need ?

Question Poco F3 bricked cant acces EDL Mode and Fastboot Mode

I have my Poco F3 today brickt when I wanted to install the latest Xiaomi.eu beta (android 12 ) via Fastboot. I do not know if it was because of that, but I have replaced the boot image in the images folder with a magisk patched boot image. that phone no longer turns on I see only a black screen. Even if I tap power+volume down and connect the usb cable (for EDL mode), my pc does not recognize the phone (or do I need special drivers for EDL mode). What do I do now. Can Xiaomi in this state me flash the software on it again? Because someone else has also destroyed his Poco F3 (similar to me) and Xiaomi has repaired it for free because it was in warranty.
F3 dead after flashing error.
I got an error at the begining of the flash, something like "too many files opened" and stop flashing. I aborted the process and now my f3 is dead, black screen, not recovery or fastboot. Windows desn't detects anything. Some help would be...
forum.xda-developers.com
It seems like you are not the only one.
To get into EDL mode you have to open the phone and make a test point but it's very likely that you need an authorized id to flash the firmware
Mine the same, black screen and nothing happens, cant even reach EDL mode or anything. Happened when trying to quit the LOS recovery and installing the EU 12 ROM all went to the trash and now phone doesnt respond to anything
There is an Anti-Rollback feature baked into MIUI to prevent you to reinstall MIUI back. You should never install MIUI using any Custom Recovery or ADB.
1. ONLY use MIFlash. MIFlash stops you to install bad software to your phone. Only certain MIUI ROMs will be accepted by your phone for install. Afterwards you can update to the latest.
2. You need to edit your MIUI ROM to remove the Anti-Rollback lines of code in order to flash it using TWRP or ADB. I believe this is were your mistake was.
About your problem if you PC does not detect your phone at all anymore, i doubt entering EDL by shortcutiing the connectors will change your situation. Your phone may be in EDL but will still not comunicate with the PC. Try specialized service and stop messing with things without understand all the steps needed for this procedure. "Nah' it will be fine" doesn't work all the time as you can see
did you find a solution ?
The97Elite said:
did you find a solution ?
Click to expand...
Click to collapse
You don't need to open the phone, you need to find someone with a Xiaomi authorized account.
You can find them by searching Google.
They will have tunnel to your PC and fix the phone, it costs about €25.
Had the same problem, very annoying. You need to check if the Phone is recognized as a Qualcomm 9008 Device, then you can do the restore, with the help of someone having a authorized MI(?) Account (and pay them, of course...).
Zimmster said:
There is an Anti-Rollback feature baked into MIUI to prevent you to reinstall MIUI back. You should never install MIUI using any Custom Recovery or ADB.
1. ONLY use MIFlash. MIFlash stops you to install bad software to your phone. Only certain MIUI ROMs will be accepted by your phone for install. Afterwards you can update to the latest.
2. You need to edit your MIUI ROM to remove the Anti-Rollback lines of code in order to flash it using TWRP or ADB. I believe this is were your mistake was.
About your problem if you PC does not detect your phone at all anymore, i doubt entering EDL by shortcutiing the connectors will change your situation. Your phone may be in EDL but will still not comunicate with the PC. Try specialized service and stop messing with things without understand all the steps needed for this procedure. "Nah' it will be fine" doesn't work all the time as you can see
Click to expand...
Click to collapse
So, only updates of MIUI are possible through TWRP?
I'm not sure if I like this new world, unbricking devices for money and all those things... coming from a POCO F1 and never had any of those issues....
11214 said:
Você não precisa abrir o telefone, você precisa encontrar alguém com uma conta autorizada da Xiaomi.
Você pode encontrá-los pesquisando no Google.
Eles terão túnel para o seu PC e consertarão o telefone, custa cerca de € 25.
Click to expand...
Click to collapse
somente essas pessoas consegue resolver o poblema ?ontem dei pau no meu tbm, fui passar a .eu via fastboot e demorou dms, fechei e tentei abrir novamente e o cmd acusou que n tinha device conectado, fui reinciar o modo fastboot e a tela apagou e nunca mais ligou kkkkkkkk to ate agr aqui sem ele, amanha vou abrir ele pra pode fazer o test point pra poder passar pra pessoa com a conta autorizada fazer o prodecimento de regravar a rom

Categories

Resources