Develop Bugs

[ROM][Unofficial][8.1.0][deprecated] Lineage OS 15.1 for Xperia Z1 compact 29.12.18

This Thread is deprecated!
Please use https://forum.xda-developers.com/sony-xperia-z1-compact/development/rom-lineageos-15-1-xperia-z1-compact-t3884247/
We'll provide Lineage 15.1 builds there as well. They come in two different flavours:
pure LineageOS
Security hardened microG LineageOS
Functionality is completely the same as provived by the builds from this thread - they are build from the same sources. Only difference: The new builds are signed to guarantee a maximum of security.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you. Hard & a lot.
*
*/
Status
List template by AdrianDC
Code:
- Boot : Ok
- GApps : OpenGApps Micro recommended
- Partitions (Data, Cache) : Ext4 and F2FS supported
- Bluetooth : Ok
- WiFi : Ok
- WiFi Hotspot : Ok
- RIL - Phone - Data : Ok
- GPS : Ok
- Camera : Ok
- Camcorder : Ok
- Lights : Ok
- MicroSD : Ok
- Accelerometer : Ok
- Compass : Ok
- Gyroscope : Ok
- Touchscreen : Ok
- FM Radio : Ok
- ANT+ : Ok
- Vibrator : Ok
- Microphone : Ok
- Audio & music : Ok
- Bluetooth audio : Ok
- MHL: didn't test
- NFC : Ok
- Kernel : Ok
- Graphics : Ok
- 3D Rendering : Ok
- Clock : Ok
- Offline Charging : Ok
- USB : Ok
- USB OTG : Ok
- Encryption : Ok, but installing updates only works with adb sideload!
- SEPolicies : Enforcing
Download
https://androidfilehost.com/?w=files&flid=269301
latest version: https://www.androidfilehost.com/?fid=11410963190603873784
Click to expand...
Click to collapse
FAQ
What about device encryption?
Device encryption is working. You only have to keep in mind that you need a PC with adb to install systemupdates.
Flashing via recovery isn't working until now, because there isn't a recovery capable of decrypting Oreo /data partitions at the moment. But an easy "adb sideload" should do the job. Or installing from the external SD card.
Click to expand...
Click to collapse
What about reboot to recovery?
Reboot to recovery is only working with magisk installed. Investigating this...
Reboot to recovery is working as it should now (and of course also without magisk).
Click to expand...
Click to collapse
What about GPS?
GPS apps like GPS Status&Toolbox or SatStat don't get location fixes. Nevertheless navigating with Osmand or googleMaps should work. Positionfinding is also slow. Got better
Click to expand...
Click to collapse
I found a bug. What should I do?
We need your feedback for optimization. But your feedback is only useful in connection with logs --> see section Bugreports
Click to expand...
Click to collapse
What about root access?
Root isn't included per default (except root over adb, but it's off by default).
If you want to gain root access to your apps use one of these (depending on your taste/needs):
Official Lineage Add-on https://download.lineageos.org/extras use su (arm) 15.1 here and flash via TWRP
Magisk https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
Click to expand...
Click to collapse
Bugreports
You'll find information about logging here.
Please also note how you got the error or how it can be reproduced.
Click to expand...
Click to collapse
Sources
Kernel: https://github.com/AICP/kernel_sony_msm8974
Manifest: https://github.com/115ek/manifest
Click to expand...
Click to collapse
Credits
SpiritCroc: big thanks to him for maintaining the device trees and a lot of very useful hints
rcstar6696
SuperLamic
drakonizer
AdrianDC
munjeni: thanks for tips and tricks
nailyk: thanks for tips and tricks
All the other contributors on sony msm8974 platform
LineageOS team
Click to expand...
Click to collapse
XDA:DevDB Information
Lineage OS 15.1 for Xperia Z1 compact - amami, ROM for the Sony Xperia Z1 Compact
Contributors
115ek, SpiritCroc, drakonizer, rcstar6696, SuperLamic, AdrianDC, nailyk, LineageOS team
Source Code: https://github.com/115ek/manifest
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.4.x
Version Information
Status: Beta
Beta Release Date: 2018-09-10
Created 2018-09-10
Last Updated 2019-03-18

Changelog
13.12.2018
fixed wrong bluetooth MAC address (00:00:00:00:5a:ad on all devices), now displaying correct device specific one
12.12.2018
synced LineageOS sources (security patch level December 05, 2018)
11.11.2018
fix problem with Lineage SU addon by using 64-bit binder API (thanks @NyQuilXT)
synced LineageOS sources (security patch level November 05, 2018)
14.10.2018
fixed GPS 3D fix
08.10.2018
fixed MHL (thanks @koron393)
added callrecording
synced LineageOS sources (security patch level October 05, 2018)
23.09.2018
fixed reboot to recovery without magisk
minor improvements from AICP devices trees (thanks @SpiritCroc)
synced LineageOS sources
10.09.2018
initial release

Hi 115ek. Thanks for making this. I'm not new to flashing but I have a question nonetheless. What do you mean by
Encryption : Ok but needs recovery capable of Oreo decryption for installing updates (AFAIK such a recovery doesn't exist until now for our device...)
Click to expand...
Click to collapse
I'm actually having some trouble finding a up-to-date recovery.

Jeroen1000 said:
Hi 115ek. Thanks for making this. I'm not new to flashing but I have a question nonetheless. What do you mean by
I'm actually having some trouble finding a up-to-date recovery.
Click to expand...
Click to collapse
You can use this https://androidfilehost.com/?fid=5862345805528046823 or that https://forum.xda-developers.com/sony-xperia-z1-compact/orig-development/recovery-twrp-3-2-1-t3759450.
For Lineage 15.x flashing you need TWRP>=3.2.x If the version is older you'll end up in a error 7.
Concerning decryption: Google introduced some new encryption stuff and so the decryption of /data from inside TWRP is broken. Some guys are working on it (@nailyk).
Encrypting the device should work fine, but I don't know what happens if you want to update the encrypted device. (I'm going to test that ).
Basically you need to store the update package outside of encrypted partitions... Maybe adb sideload works - but it's circumstantial.
Edit:
That's only interesting if you plan to encrypt your device. Otherways you can relax.
Edit2:
adb sideload should do the job. But you need a PC for updating. Installing an image directly via recovery isn't possible until now.

With sources for both kernel and system unlike the other port! Thanks, I'll definitely be using this!

Xperia J1 Compact
could this work on an Xperia J1 Compact?
it's basically the same phone with the same specs right?

The rom looks very stable and balance, but I've some problems with root procedure. I tried the lineage addon, the root seems active, but opening apps (es. Ad away) results unrooted, any ideas?
Update: Now Works. Flashed lastest Magisk

Amazing to see this old device on Oreo, just installed and it feels smooth and nice. Just a pity that I have broken the sim card connectors inside so I cant use it as a phone but I will fins use of it at home just for fun. Thank you for your work 115ek :good:

Great to see this rom realy! This rom have stock camera?

munjeni said:
Great to see this rom realy! This rom have stock camera?
Click to expand...
Click to collapse
What do you mean with stock camera?
There was a thing with kernel versions 3.4 and 3.10, wasn't it? We're using 3.4.
Concerning the camera: I'm not that expert, but it looks okay I would say.
Feel free to contribute: There's still the reboot-to-recovery problem and Pie is in the starting blocks.

115ek said:
Feel free to contribute: There's still the reboot-to-recovery problem and Pie is in the starting blocks.
Click to expand...
Click to collapse
my phone reboots to recovery.
Need to install Magisk
without it I also do not reboot to recovery

raschad said:
my phone reboots to recovery.
Need to install Magisk
without it I also do not reboot to recovery
Click to expand...
Click to collapse
Thanks, but I already knew this
But I like to reboot to recovery without magisk. I think there are people around who don't like/need magisk (including me).
The fact that it works with magisk may locate the problem to the boot.img. I have init_sony in mind and will check that.
Any ideas welcome

115ek said:
Thanks, but I already knew this
But I like to reboot to recovery without magisk. I think there are people around who don't like/need magisk (including me).
The fact that it works with magisk may locate the problem to the boot.img. I have init_sony in mind and will check that.
Any ideas welcome
Click to expand...
Click to collapse
I meant does this rom have stock camera blobs? Do you have property: ro.bootmode
and does /proc/cmdline shows diferent bootreason when you set reboot reason to recovery?

munjeni said:
Do you have property: ro.bootmode
and does /proc/cmdline shows diferent bootreason when you set reboot reason to recovery?
Click to expand...
Click to collapse
Good news: an easy import of your init_board_device.h did the trick. Maybe a timing problem?
Anyway: reboot to recovery is now working correctly, even without magisk
Is that okay for you: http://gerrit.aicp-rom.com/c/AICP/device_sony_msm8974-common/+/73688 ?

I just found this https://github.com/LineageOS/androi...neage-15.1/init/init_sony/init_board_device.h its just prototype so seems you have missed init_sony/init_board_device.h in your device tree...

munjeni said:
I meant does this rom have stock camera blobs?
Click to expand...
Click to collapse
We're using them https://github.com/AICP/proprietary_vendor_sony/tree/o8.1/rhine-common/proprietary/vendor, so I guess yes.
You're more into topic, aren't you? How to distinguish between AOSP and stock blobs? There were some mysteries around DRM, camera quality and so on. I remember a separate thread you also participated in...
But I'm not really into this topic.

munjeni said:
I just found this https://github.com/LineageOS/androi...neage-15.1/init/init_sony/init_board_device.h its just prototype so seems you have missed init_sony/init_board_device.h in your device tree...
Click to expand...
Click to collapse
No, it's actually in here: https://github.com/AICP/device_sony_msm8974-common/blob/o8.1/include/init_sony/init_board_device.h
But It's different from yours. Yours performs another keycheck.

Seems rom have stock blobs. To distinguish between AOSP and stock blobs... depends on kernel you have using, aosp kernel can't be used with stock blobs since aosp camera kernel module is diferent, but I'm out of development for long, have no free time and to be honest I still didn't forgot treatment & injustice for my status on xda, that made me more inactive here. Recognised members have bad treatment here, seems senior members have much more priority than recognised members, and thats reason why everybody here need to care how many hours per day to waste here. I decided to stop wasting my time on xda since xda leaders do not respect anybody's hard work here. I recommend the same to everyone here.

I tried "reboot to recovery", after Sony logo the phone reboot again (also if you press recovery button), and to enter in recovery you've to push again the button at the second reboot.
It is like a normal reboot... But it's not a problem ?

ULT][MO said:
I tried "reboot to recovery", after Sony logo the phone reboot again (also if you press recovery button), and to enter in recovery you've to push again the button at the second reboot.
It is like a normal reboot... But it's not a problem
Click to expand...
Click to collapse
What recovery are you using? I recommend this one: https://forum.xda-developers.com/sony-xperia-z1-compact/orig-development/lineageos-12-1-z1c-current-sec-patches-t3614936.
With mine from here https://forum.xda-developers.com/sony-xperia-z1-compact/orig-development/recovery-twrp-3-2-1-t3759450 it still won't work. Maybe a timing thing.
But it's okay if we have at least one working TWRP.
And oreo /data decryption is still an issue we have to address.

[ROM][cheeseburger][10.0.X] LineageOS 17.1 (Q) for Oneplus 5

LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/
SCREENSHOTS
3rd PARTY ADDONS/MODS
While we have no issues with people using supersu/magisk/xposed/custom kernels/etc, we can't provide support for users who have them installed.
This thread is not the right place to discuss about mods/addons.
HOW TO INSTALL LINEAGEOS
- Make sure your phone was running OxygenOS 5.1.4 at least once
- Remove custom encryption pins/passwords else decryption will fail!
- Upgrade to latest available official firmware
- Upgrade to latest available TWRP
- Download the LineageOS zip(s). (see Downloads)
- Copy the LineageOS zip to internal sdcard.
- Unlock bootloader and install TWRP.
- Boot into TWRP.
- Perform a backup of your current ROM. (Optional)
- RECOMMENDED: Do a factory reset! No support if you didn't!
- Flash LineageOS.
- Optional: Install the Google Apps addon package. (see Downloads)
- Reboot
HOW TO UPDATE LINEAGEOS
- Download the LineageOS zip(s). (see Downloads)
- Copy the LineageOS zip to internal sdcard.
- Flash LineageOS.
- Reboot
HOW TO UPGRADE LINEAGEOS FROM LOWER VERSION
- Upgrade to latest available official firmware
- Upgrade to latest available TWRP
- Download the LineageOS zip(s). (see Downloads)
- Copy the LineageOS zip to internal sdcard.
- Flash LineageOS.
- Update the Google Apps addon package if it was installed on your previous LineageOS version.
- Reboot
DOWNLOADS
LineageOS 17.0: Official | Unofficial
Firmware: https://sourceforge.net/projects/cheeseburgerdumplings/files/17.1/cheeseburger/firmware/
Migration-Tools: https://androidfilehost.com/?w=files&flid=254680 (Unofficial->Official, Official->Unofficial)
SU-Addon: Official | Unofficial
Google Apps: http://opengapps.org/ | BETA
TWRP: TWRP by codeworkx | Official
DEVELOPER RESOURCES
https://github.com/LineageOS/android_device_oneplus_cheeseburger
https://github.com/LineageOS/android_device_oneplus_msm8998-common
https://github.com/LineageOS/android_kernel_oneplus_msm8998
HOW TO CONTRIBUTE?
Send your patches up for review: https://review.lineageos.org/
TELEGRAM GROUP
https://t.me/joinchat/GQS-ghNaf-1YMpjSbh_puQ

I returned back to stock yesterday. I'll sit here and wait 'till this ROM will be more stable. But why haven't you merged 4.4.192?

thankss )

Tested for an hour now. Runs very smooth, dash charging works. But video playback doesn't work at all(browser, youtube, reddit, snapchat)

It's a Trainwreck not even close to daily driveable I've always loved lineage since CyanogenMod but they have a lot of work still I can't even get the firmware to work I'm gonna wait a few for a couple updates and try again but nitrogen seems solid until then

Added to the OnePlus 5 Index Thread here.

tattooed87129 said:
It's a Trainwreck not even close to daily driveable I've always loved lineage since CyanogenMod but they have a lot of work still I can't even get the firmware to work I'm gonna wait a few for a couple updates and try again but nitrogen seems solid until then
Click to expand...
Click to collapse
NOS is better. CRD is also down.

Planning to test this rom. Can be used as a daily driver?

On flashing as a fresh install the ROM always restarts to recovery. What am I doing wrong ?
-----
Got it working. I had to flash the firmware again

eNVy said:
On flashing as a fresh install the ROM always restarts to recovery. What am I doing wrong ?
-----
Got it working. I had to flash the firmware again
Click to expand...
Click to collapse
Use latest codeworkx recovery.

Anyone flash the latest from the cyanogen lineage site 17.0-20191006?

Thanks!
Regarding firmware folder, it seems it is empty. Is there any additional source?

pep0te said:
Thanks!
Regarding firmware folder, it seems it is empty. Is there any additional source?
Click to expand...
Click to collapse
Yes, you can find all the OP5 firmwares in the following post: https://forum.xda-developers.com/showpost.php?p=76943628&postcount=8

shadowstep said:
Yes, you can find all the OP5 firmwares in the following post: https://forum.xda-developers.com/showpost.php?p=76943628&postcount=8
Click to expand...
Click to collapse
Thanks dude! Brilliant.

I'm having issues with ads on this build. As everything in Android and apps and games revolve around ads it basically hinders just a bout everything. Whenever an ad-video tries to load while in-app, it just does nothing. Black screen and that's it. Reverted back to Stock OxygenOS.

ohohrobinho said:
I'm having issues with ads on this build. As everything in Android and apps and games revolve around ads it basically hinders just a bout everything. Whenever an ad-video tries to load while in-app, it just does nothing. Black screen and that's it. Reverted back to Stock OxygenOS.
Click to expand...
Click to collapse
Are you using an ad blocker? If yes, try to deactivate it for otherwise not working apps.

It failed to install.
After flashing the ZIP, Magisk and GApps, it boots to fastboot.
I disabled dm-verity in Magisk and the data partition is not encrypted.

pthfdr said:
After flashing the ZIP, Magisk and GApps, it boots to fastboot.
I disabled dm-verity in Magisk and the data partition is not encrypted.
Click to expand...
Click to collapse
Are you decrypted?
Flash rom , gapps and no verity
After setup flash magisk

Why do we need to flash firmware? Can't flash directly?

Hi all,
Can anyone explain why I can't use Google Pay(Tez) in this custom build of LineageOS 17 whereas it can run on official LineageOS 16 builds ?

[10.0][STABLE] AOSiP Quiche beta

Android Open Source illusion Project
Code:
/*
* I'm not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed (like it did for me...).
* Please do some research if you have any concerns about features included in the products you find here before flashing it!
* YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
* Your warranty will be void if you tamper with any part of your device / software.
* Same statement for XDA.
*/
"AOSiP stands for Android Open Source illusion Project. We are an AOSP based custom ROM, twisted with the latest features from all over the Android development community. Quality and stability is our first priority as we are dedicated to bringing you the best Android has to offer.
AOSiP brings you the most wanted features, while keeping speed and stability our top priority.
AOSiP features multiple customization options, so your phone can look the way you want it."
Known issues:
- AOSiP ten is not officially released yet. There are missing features!
- Display > lockscreen > advanced settings (this wont to do anything)
- Instagram video recording (You will sound like a robot)
- Wi-Fi display reboots the phone
- Green pictures when using the stock camera/ Whatsapp in lowlight (this is related to YUV processing). Use provided gcam instead.
- Report unknown bugs with logs please!
Instructions :
Clean flash:
- Flash latest Pie ROM by Xiaomi (10.0.13.0). You may use option to retain userdata.
- Use fastboot to boot to latest TWRP.
- Falsh the TWRP installer zip and Force-encryption-disabler zip
- Reboot to TWRP
- Flash the ROM zip
- Flash TWRP installer
- Got to Reboot --> Change boot slot (if on A: A --> B or if on B: B --> A)
- Reboot to recovery
- (Optional, but recommended) Flash GAPPS linked below (other GAPPS for Android 10 may work too)
- (Optional) Flash Magisk (>v20.1!!!!)
- Reboot and wait, will take longer than normal reboot!
Dirty flash (upgrade from existing AOSiP 9 install):
- Reboot to TWRP
- Factory reset in TWRP. No need to wipe userdata! (Skip if you are on ten already)
- Flash ROM zip
- Flash TWRP installer
- Got to Reboot --> Change boot slot (if on A: A --> B or if on B: B --> A)
- Reboot to recovery
- (Optional, but recommended) Flash GAPPS linked below (other GAPPS for Android 10 may work too)
- (Optional) Flash Magisk (>v20.1!!!!)
- Reboot and wait, will take longer than normal reboot!
Note: It is strongly advised to make a backup before upgrading!
Downloads :
Download from Sourceforge
Open GApps Note: OpenGAPPS for ten now officially out, so link changed. Nano package is still recommended!
Recommended Gcam
Kernel Source
Device Tree
Vendor Tree
Props to all the guys from daisy-development-q and especially Lyceris-chan!
Have fun!
XDA:DevDB Information
[10.0][STABLE] AOSiP Quiche beta, ROM for the Xiaomi Mi A2 Lite
Contributors
opal06
Lyceris-chan
Tunasahinn
acras01
pawelik001
Offain/33bca
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
Version Information
Status: Stable
Created 2019-11-27
Last Updated 2019-11-27

Thank you! Respect mate
Edit:
PS. With gapps you reccomend. Can i use Bit... or Open.. ?

gumka77 said:
Thank you! Respect mate
Edit:
PS. With gapps you reccomend. Can i use Bit... or Open.. ?
Click to expand...
Click to collapse
I used the OpenGAPPS from test folder I linked in the OP. Bit... might work, but no guarantee. Just try them and report back, so maybe other users can learn from your experiences.
Note: Updated my main phone from AOSiP Pie to Ten and had some wierd issues. Factory resetted in TWRP and now everything working. So making a backup and factory reset before updating is recommended

When viperos q?

Thanks you , I see your sources is stable thanks for upgrade aosip
opal06 said:
Android Open Source illusion Project
Code:
/*
* I'm not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed (like it did for me...).
* Please do some research if you have any concerns about features included in the products you find here before flashing it!
* YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
* Your warranty will be void if you tamper with any part of your device / software.
* Same statement for XDA.
*/
"AOSiP stands for Android Open Source illusion Project. We are an AOSP based custom ROM, twisted with the latest features from all over the Android development community. Quality and stability is our first priority as we are dedicated to bringing you the best Android has to offer.
AOSiP brings you the most wanted features, while keeping speed and stability our top priority.
AOSiP features multiple customization options, so your phone can look the way you want it."
Known issues:
- AOSiP ten is not officially released yet. There are missing features!
- Device side should be fine, but please report all bugs here with logs!
Instructions :
Follow guide by davidrocher: https://github.com/tkchn/daisyinstall
This works for Android 10 too! Please use correct version of OpenGAPPS.
Note: It is strongly advised to make a backup before upgrading and performing a factory reset in TWRP.
Downloads :
Download from Sourceforge
Open GApps
Kernel Source
Device Tree
Props to all the guys from daisy-development-q and especially acras1!
Have fun!
XDA:DevDB Information
[10.0][STABLE] AOSiP Quiche beta, ROM for the Xiaomi Mi A2 Lite
Contributors
opal06
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
Version Information
Status: Stable
Created 2019-11-27
Last Updated 2019-11-27
Click to expand...
Click to collapse

i can't believe wifi, call, bluetooth audio, cam, fingerprint, navigation, google, youtube, spotify, usb connection to pc works
Only two things i've discovered, there is no clock app (i installed Gapps pico maybe that the problem) and AOSiP Updater seems not working.
Can someone give me a clock/ alarm app - opensource ? (App of Tibor Kaputa doesn't work)

schmidt_here said:
i can't believe wifi, call, bluetooth audio, cam, fingerprint, navigation, google, youtube, spotify works
Only two things i've discovered, there is no clock app (i installed Gapps pico maybe that the problem) and AOSiP Updater seems not working.
Can someone give me a clock/ alarm app - opensource ? (App of Tibor Kaputa doesn't work)
Click to expand...
Click to collapse
See if this works for you:
View attachment Clock_v1.0.0.zip

Thanks for the rom, what base is needed?, is November security patch?

Txatxiquesi said:
Thanks for the rom, what base is needed?, is November security patch?
Click to expand...
Click to collapse
yes, november
i don't remember wich version it was, i think 10.0.9. Try 10.0.13 and then post if it works
ps: i installed omniclock from playstore - it works
Fingeprint swipe doesn't work

opal06, kudos for signature spoofing built-in, I can use microG.

Can i update kernel to Celexas kernel v.2. (from devotag) ?

Thank you all very much for your positive feedback.
schmidt_here said:
i can't believe wifi, call, bluetooth audio, cam, fingerprint, navigation, google, youtube, spotify, usb connection to pc works
Only two things i've discovered, there is no clock app (i installed Gapps pico maybe that the problem) and AOSiP Updater seems not working.
Can someone give me a clock/ alarm app - opensource ? (App of Tibor Kaputa doesn't work)
Click to expand...
Click to collapse
As for the missing clock, I did not notice it during testing, but you are obviously right. For a stock feeling you can download the Clock app by Google, but there are many other good alternatives.
AOSiP updater is not working because I did not update the OTA file. AOSiP ten is still beta from ROM source side, so I won't enable OTA until it's official from their side.
Txatxiquesi said:
Thanks for the rom, what base is needed?, is November security patch?
Click to expand...
Click to collapse
As base any pie base should work, but latest is best.
schmidt_here said:
yes, november
i don't remember wich version it was, i think 10.0.9. Try 10.0.13 and then post if it works
ps: i installed omniclock from playstore - it works
Fingeprint swipe doesn't work
Click to expand...
Click to collapse
Have you enabled fingerprint swipe in Settings --> System --> Gestures? For me it works fine
gumka77 said:
Can i update kernel to Celexas kernel v.2. (from devotag) ?
Click to expand...
Click to collapse
Probably, just try and report. If something goes wrong, go to TWRP and flash ROM again without wiping data. You won't loose any settings or data.

Plis build with nitrogen kernel

test
opal06 said:
Have you enabled fingerprint swipe in Settings --> System --> Gestures? For me it works fine
Click to expand...
Click to collapse
Yes, it's enabled. It doesn't disturb me, maybe i've to make a fresh install and take another version base.
Yesterday i had an issue, i couldn't download from play store until i deactivated and reactivated the app. Also i couldn't install apk's downloaded manualy from website.
Maybe it's a unique incident

schmidt_here said:
Also i couldn't install apk's downloaded manualy from website.
Click to expand...
Click to collapse
I had a similar issue trying to install apps with Amaze file manager. I had no problem installing apps with the built-in file manager and also with F file manager from f-droid, in my case it was obviously an incompatibility of Amaze with 10. I'm on 10.0.9 base btw. Also I was able to delete system apps with Amaze and magisk 19.3 but not with 20.1. And I can't uninstall Whatsapp no matter what, the installer just quits so I must do it with adb uninstall.

celrau said:
I had a similar issue trying to install apps with Amaze file manager. I had no problem installing apps with the built-in file manager and also with F file manager from f-droid, in my case it was obviously an incompatibility of Amaze with 10. I'm on 10.0.9 base btw. Also I was able to delete system apps with Amaze and magisk 19.3 but not with 20.1. And I can't uninstall Whatsapp no matter what, the installer just quits so I must do it with adb uninstall.
Click to expand...
Click to collapse
That's normal behavior for magisk 20.1 because the system mount point had been changed from /system to / so most root using apps don't know how to use it. Besides that you can use the system debloater magisk module and that should work just fine.

lacia-chan said:
That's normal behavior for magisk 20.1 because the system mount point had been changed from /system to / so most root using apps don't know how to use it. Besides that you can use the system debloater magisk module and that should work just fine.
Click to expand...
Click to collapse
I just did some reading on this, you are right

Flashing Nitrogen R2 kernel results in bootloop with this rom. R1 works fine. Any fix?

good job

I'm using your rom for 1-2 days now Looks like every features work really well to me. I'l report back later if I see anything. Thanks OP

[ROM][9.0][UNOFFICIAL] [G800H] LineageOS 16.0 [07-11-2020]

LineageOS 16.0 for S5 Mini G800H​
DO NOT FLASH IT ON EXYNOS VARIANT G800F/M/Y OR YOU WILL BRICK YOUR DEVICE
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Working:
Wifi
Sound
MTP
Video Playback
Fingerprint Sensor
Ril (Mobile data,calls, sms and stuff)
Sensors
Buttons and their backlight
SELinux
Bluetooth
Wifi HotSpot
Camera
GPS
Not Working:
you tell
Requirements:
- latest marshmallow firmware
- TWRP
- a rooted S5 Mini G800H
Downloads:
ROM: GDrive
Recovery: GDrive
Instructions:
-Flash the twrp zip from the downloads
-reboot to recovery
-wipe everything but microsd card
-install ROM
-optional, install opengapps nano or pico
Reboot!
Telegram Group : link
Credits and thanks:
LineageOS
Alastor89 and Thargorsson
Jackeagel
AlaskaLinuxUser
Samsung
anyone else I forgot
Changelog:
Code:
[B]07.11.2020[/B]
Fixed sensors, again
Fixed GPS
[B]27.10.2020[/B]
Fixed offline charging
Fixed earpiece
Fixed capacitive buttons
Switched CPU governor to interactive
Synced with latest lineage source
October security patch
Switched to official LOS MSM8226 kernel
Switched to official LOS MSM8226-COMMON device tree
Stability and performance improvements
[B]07.03.2020[/B]
Fixed Bluetooth FC
Fixed sepolicy permissions for sensors
[B]06.03.2020[/B]
Initial Alpha release
Source:
Code:
[url=https://github.com/LineageOS/android_kernel_samsung_msm8226]kernel[/url]
[url=https://github.com/LineageOS/android_device_samsung_msm8226-common]common[/url] [B]WIP[/B]
[url=https://github.com/S3NEO/android_device_samsung_kmini3g]device[/url] [B]WIP[/B]
[url=https://github.com/S3NEO/android_vendor_samsung_kmini3g]vendor[/url] [B]WIP[/B]
XDA:DevDB Information
LineageOS kmini3g, ROM for the Samsung Galaxy S5 Mini
Contributors
isbon, Alastor89, Thargorsson
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.4.x
Based On: LineageOS
Version Information
Status: Beta
Beta Release Date: 2020-03-06
Created 2020-03-05
Last Updated 2020-11-07

Reserved

Great work! :good:

Cool. A great day for the S5 MINI. Thank you. Is the fingerprint reader working? Are two SIM cards active?

it will bring my zombi G800H to life again. Great work

Hello
I proceed according to the description:
1. install the twrp from the download section (Go into your existing twrp> Install> Install image> select the recovery image> flash) - here I select the recovery partition
-wipe everything but microsd card
-install ROM - error pops up here:
E: unkown command
Updater process enden with ERROR: 7
Can I ask you for help in installation? How to install ?

tom1ko said:
Hello
I proceed according to the description:
1. install the twrp from the download section (Go into your existing twrp> Install> Install image> select the recovery image> flash) - here I select the recovery partition
-wipe everything but microsd card
-install ROM - error pops up here:
E: unkown command
Updater process enden with ERROR: 7
Can I ask you for help in installation? How to install ?
Click to expand...
Click to collapse
Try rebooting to twrp after flashing the recovery image.

OK, I have already installed, I confirm that there is support for two SIM cards and the fingerprint reader also works, thanks again for this rom, great work

Hello. You cannot hear the caller during a conversation. It actually helps to insert and pull out the mini jack cable - but you must repeat this for each new conversation. In contrast, the fingerprint reader works like a rocket - much better and faster operation than about stock rom

Hi! Just installed here, thanks for the ROM! Flashlight is working OK. Back and recente apps buttons work fine when I turn the device on, but after some time they stop working. Recent apps does not work at all and back button works as holding the recent apps open, dividing the screen. Also the battery icon shows as it is charging event after it stops charging. Everything works again after a reboot.

tom1ko said:
OK, I have already installed, I confirm that there is support for two SIM cards and the fingerprint reader also works, thanks again for this rom, great work
Click to expand...
Click to collapse
Hello, can you please share how did you solve mentioned error ? I have the same, thanks!

Hey. You have to, as he wrote "isbon" or "Try rebooting to twrp after flashing the recovery image" after restarting twpr after uploading recovery image once again you go to twpr and only upload rom

Hello there! Is The rom usuabble?
I think I will install the phone accordingly, if Rom will be improved regularly.
Is rom what time going to stable?
Thanks u very much

would it work on G800R4 US CELLULAR?

Are there screenshots of rom?

mistiko247 said:
Are there screenshots of rom?
Click to expand...
Click to collapse
I will upload a few later.

Soft is a masterpiece - it works beautifully on the phone, much faster than on the samung firmware. The phone is fully functional. Thank you very much to the creators. The phone got a second life - I sincerely recommend it to others.

when complete flash rom and After the logo for a few minutes back to recovery !!!! whey ?

have you done wipe everything but microsd card?

when flash rom is complete and after the logo for a few minutes returns to recovery ...
I don't know what's up, any idea?

ReaperTreble V3.0 [J730X/J530X][TREBLE][GSI]

ReaperTreble V3.0​
Code:
#include <std_disclaimer.h>
/*
* Your warranty is... still valid?
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Changelog
- Initial Release for J7/530X
- Removed useless security stuff
- fixed minor bugs
- Debloated
- Changed Configs
- Changed WiFi blobs to stock J7
- Used stock J7 Prime files
- Kraken Kernel RC14 included (no reboots)
Yes, TRR Treble is supported.
Click to expand...
Click to collapse
How to install
- Flash Create Vendor zip from @ananjaser1211's Spaget project and reboot to recovery.
- Download any ARM32_Binder64 A-only Android 9/10 GSI(Or simply A64 A-only GSI)
- Download latest ReaperTreble Zip
- Reboot to recovery and wipe System, Vendor, Cache/Dalvic and Data(Wiping internal storage isn't necessary)
- Flash GSI and ReaperTreble zip(or the otherway around)
- Reboot to system and enjoy
Click to expand...
Click to collapse
Download link-
- Androidfilehost
- Mirror GDrive
Click to expand...
Click to collapse
Bugs
- Offline Charging in Q GSIs
- NFC
- Stretched camera in some apps(GSI camera works perfect)
- You tell us
Click to expand...
Click to collapse
Donations:- Donating to charity would be better. But if you wanna thank me, I'd love if you hit that thanks button.
Click to expand...
Click to collapse
Telegram support group.
Credits
- @therealmodder
- @ananjaser1211
- @corsicanu
- @SPARTANICUS
- @DAvinash97
- And all my telegram testers.
PM me at @soulr344 if i missed anyone.
Click to expand...
Click to collapse
XDA:DevDB Information
ReaperTreble V3.0 [J730X/J530X], ROM for the Samsung Galaxy J7 (2017)
Contributors
soulr344, therealmodder, ananjaser1211
Source Code: https://github.com/SPART4NICUS/android_kernel_samsung_exynos7870
ROM OS Version: Android 10
ROM Kernel: Linux 3.x
Version Information
Status: Stable
Current Stable Version: 3.0
Stable Release Date: 2020-04-28
Created 2020-04-28
Last Updated 2020-04-28

Nice work as always!
btw, don't upload to AFH. They are using dumb**** servers and we arent be able to download

bien2004official said:
Nice work as always!
btw, don't upload to AFH. They are using dumb**** servers and we arent be able to download
Click to expand...
Click to collapse
Yeah I've added gdrive mirror, thanks bro

error 6 in twrp how to fix it?

vytska69 said:
error 6 in twrp how to fix it?
Click to expand...
Click to collapse
I have the same problem

I'm sorry for the inconvenience but the issue is fixed now, go ahead and redownload it. Thanks

I have followed the steps and the camera does not open that gsi must be downloaded or how to fix it

error in camera does not open gsi lineage

agaponi said:
error in camera does not open gsi lineage
Click to expand...
Click to collapse
Camera perfectly works according to my testers. Mention your device/kernel (and send logs if possible) to fix the issue.

It is the J5 J530f and I installed the lineage the variant of a-gsi and there will be no camera and I followed the steps or guide me what gsi I have to download or something because if I am doing something wrong

agaponi said:
It is the J5 J530f and I installed the lineage the variant of a-gsi and there will be no camera and I followed the steps or guide me what gsi I have to download or something because if I am doing something wrong
Click to expand...
Click to collapse
Does any third party camera work? And as i said, unless you give logs, we cant help

Back and recents keys not working, only įn virtual navbar

vytska69 said:
Back and recents keys not working, only įn virtual navbar
Click to expand...
Click to collapse
what u GSI used?

i do test this my step
1. from stock with twrp (do full wipe)
2. reboot to recovery
3. install creat vendor and reboot to recovery
4. full wipe and reboot to recovery
5. instal reaper trebel and reboot recovery
6. instal GSI (los q a64a) and opengaps nano
7. reboot and get only j730gm logo restart again and again
any wrong my step ??

agaponi said:
It is the J5 J530f and I installed the lineage the variant of a-gsi and there will be no camera and I followed the steps or guide me what gsi I have to download or something because if I am doing something wrong
Click to expand...
Click to collapse
Seems like camera is bugged in gsi but is working just fine on oneui. Thanks for the report, I'm working towards solving the issue.

SAMSIANTO said:
i do test this my step
1. from stock with twrp (do full wipe)
2. reboot to recovery
3. install creat vendor and reboot to recovery
4. full wipe and reboot to recovery
5. instal reaper trebel and reboot recovery
6. instal GSI (los q a64a) and opengaps nano
7. reboot and get only j730gm logo restart again and again
any wrong my step ??
Click to expand...
Click to collapse
one again, work,, can boot and great work,, :good:

j730f Turkey sim no service.