Warnings:
- If you try to flash in "firmware upgrade" mode, bootloader will be LOCKED again !
- NEVER try to flash in "format all" mode ! Otherwise, you will LOSE all secure and identifying infos for your device. Like IMEI and MAC.
- Keep your backup files safe and secure ! If you can, encrypt them.
- Never try to share your backups or your security and privacy will be compromised.
- USE AT YOUR OWN RISK. I AM NOT RESPONSIBLE FOR YOUR ACTIONS.
Downloads:
- SP Flash Tool (Windows): https://spflashtools.com/category/windows
- SP Flash Tool (Linux): https://spflashtools.com/category/linux
- Download-Agent (DA) file: https://forum.xda-developers.com/t/...omi-redmi-note-9-xiaomi-redmi-10x-4g.4209765/
- Scatter file: https://forum.xda-developers.com/t/...omi-redmi-note-9-xiaomi-redmi-10x-4g.4223097/
- (Optional) ReadBack file: https://forum.xda-developers.com/t/...omi-redmi-note-9-xiaomi-redmi-10x-4g.4223109/
Alternative Downloads:
If you are having problems for flashing on Windows with sp flash tool, give a try on these versions:
- SP Flash Tool v5.2020 https://spflashtools.com/windows/sp-flash-tool-v5-2020
- SP Flash Tool v5.1920 https://spflashtools.com/windows/sp-flash-tool-v5-1920
- SP Flash Tool v5.1916 https://spflashtools.com/windows/sp-flash-tool-v5-1916
1. Extract (or install) SP Flash Tool.
2. Extract Download-Agent (DA) file to the SP Flash Tool home folder.
3. Copy the Scatter file to the SP Flash Tool home folder.
4. If you've downloaded the ReadBack file and want to make backup of your device, copy the ReadBack file to the SP Flash Tool home folder. If not, skip this.
5. Run SP Flash Tool.
6. Select Download tab.
7. Click Choose button for finding the Download-Agent and select the Download-Agent (DA) file.
8. Click Choose button for finding the Scatter-loading and select the Scatter file.
9. Click Options in the menu bar. And then select Option.
10. In General tab, UNCHECK "LIB DA match" and UNCHECK "Storage Lite Cycle".
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Done !
Now you are ready for to flash, to format or to readback whatever you want.
How to properly solve the errors of the SP FLASH TOOL ?
If you are facing any error or any problem using the SPFlashTool, try this guide: https://forum.xda-developers.com/t/...for-merlin-redmi-note-9-redmi-10x-4g.4238161/
Do you need help with your MERLIN device ?
Read this FAQ: https://forum.xda-developers.com/t/...for-merlin-redmi-note-9-redmi-10x-4g.4225163/
whats the difference between sp flash tool and xiaomi flash tool?
dokja28 said:
whats the difference between sp flash tool and xiaomi flash tool?
Click to expand...
Click to collapse
MiFlash uses fastboot writing.
SP Flash Tool uses eMMC writing.
Oh so if i want to flash older miui version for example I'm on global 12.0.6 and i want to flash 12.0.3 global what would i use so that my bootloader cant be lock
dokja28 said:
Oh so if i want to flash older miui version for example I'm on global 12.0.6 and i want to flash 12.0.3 global what would i use so that my bootloader cant be lock
Click to expand...
Click to collapse
Try using sp flash tool.
But if you are on V12.0.5.0 or higher, you need to bypass authorization and flash in EDL mode: https://forum.xda-developers.com/t/...d-flash-in-edl-with-no-auth-for-free.4229683/
dokja28 said:
whats the difference between sp flash tool and xiaomi flash tool?
Click to expand...
Click to collapse
Xiaomi flash tool is an official tool specifically only for Xiaomi devices, it can flash in fastboot mode and download mode both.
Sp flash is an unofficial tool which works for almost every device with Mediatek chipset, and it can flash only in download mode.
help this is what happening after i inserted the device
definitelynotgeddd said:
help this is what happening after i inserted the device
Click to expand...
Click to collapse
You are using wrong DA file.
See "Download-Agent (DA) file" in "Downloads".
@VD171
Probably an unusual question:
I hate android 10/11, they simply abuse of "security" bs and prevents us of doing what we want with our phones.
Is it possible to get rid of dynamic partitions and install some android 9 (Pie) from old days of freedom?
Jazzda said:
@VD171
Probably an unusual question:
I hate android 10/11, they simply abuse of "security" bs and prevents us of doing what we want with our phones.
Is it possible to get rid of dynamic partitions and install some android 9 (Pie) from old days of freedom?
Click to expand...
Click to collapse
Do you mean some rom like GSI ?
I have no ideia, my friend.
But, android 9, 10, 11 and 12 are totally compatible.
So, I think yes, you can.
VD171 said:
Do you mean some rom like GSI ?
I have no ideia, my friend.
But, android 9, 10, 11 and 12 are totally compatible.
So, I think yes, you can.
Click to expand...
Click to collapse
Yes, I mean GSI, but without the super partition, where every partition goes to root (boot, system, vendor, userdata, etc)
Jazzda said:
Yes, I mean GSI, but without the super partition, where every partition goes to root (boot, system, vendor, userdata, etc)
Click to expand...
Click to collapse
Just try and then tell us the result.
help me redmi note 9 hard brick 3 months. can't access fastboot, help me redmi note 9 hard brick 3 months. can't access fastboot, not edl, and can't enter recovery, my redmi note 9 restarted 2x. the last solution was to use sp flash and as a result there was a notification like ininot edl, and couldn't enter recovery, I restarted my redmi note 9 twice. the last solution is to use sp flash and as a result there is a notification like this
Ray Gaming said:
help me redmi note 9 hard brick 3 months. can't access fastboot, help me redmi note 9 hard brick 3 months. can't access fastboot, not edl, and can't enter recovery, my redmi note 9 restarted 2x. the last solution was to use sp flash and as a result there was a notification like ininot edl, and couldn't enter recovery, I restarted my redmi note 9 twice. the last solution is to use sp flash and as a result there is a notification like this
Click to expand...
Click to collapse
Try to flash other MIUI versions in firmware upgrade mode.
Good luck
VD171 said:
thank you for helping me, and my device has come back to life. so long. and I downloaded a lot of firmware and I'm using this firmware QJOMIXM_20200512.0000.00_10.0_global_53a4483cec.tgz. and the bootloader status becomes locked again. I didn't back it up. I'm looking for UBL instances let me know friends
Click to expand...
Click to collapse
Ray Gaming said:
thank you for helping me, and my device has come back to life. so long. and I downloaded a lot of firmware and I'm using this firmware QJOMIXM_20200512.0000.00_10.0_global_53a4483cec.tgz. and the bootloader status becomes locked again. I didn't back it up. I'm looking for UBL instances let me know friends
Click to expand...
Click to collapse
Good work, my friend.
I suggest you to unlock bootloader once you can and then, backup it following my guide:
[GUIDE][UNLOCK] How to restore the state of UNLOCKED BOOTLOADER in MERLIN (Xiaomi Redmi Note 9 / Xiaomi Redmi 10X 4G)
It works with: - Xiaomi Redmi Note 9 - Xiaomi Redmi 10X 4G - Probably some others Xiaomi devices How to backup: Step 1: Unlock your bootloader. Step 2: Backup partition: seccfg You can backup it using the SP FLASH TOOL, TWRP or copy it with...
forum.xda-developers.com
How can restore unlock boot status after backup seccfg?
MA7MOD_GSM said:
How can restore unlock boot status after backup seccfg?
Click to expand...
Click to collapse
Just follow the guide and select the seccfg partition to download only.
VD171 said:
Just follow the guide and select the seccfg partition to download only.
Click to expand...
Click to collapse
so I'm flashing the romglobal v11.0.9 then I flashed the md1img from rom_eng but waht I do is replace the one on the global rom nd the flash it because if I load the entire rom_eng it says that I have to flash erase all but I can't still use maui meta
So can i
VD171 said:
MiFlash uses fastboot writing.
SP Flash Tool uses eMMC writing.
Click to expand...
Click to collapse
So can I use miflash to flash my Merlin and will i need to pass any authorisationnif i want to downgrade from 12.5.5 to 11.0.2?
Related
UNLOCKING YOUR PHONE WILL ERASE ALL OF YOUR DATA, SO MAKE A BACKUP OF YOUR DATA TO EITHER PC OR EXTERNAL SD CARD.
Hi All, I'm summarizing all steps required for BL unlock, TWRP and rooting our Realme 5 Pro(tested with Indian variant).
I'm not the Owner of any file required in this guide. So credit goes to real developer/maintainer of these files/patches/mods.:fingers-crossed::fingers-crossed:
Unlocking: Follow below steps one by one. Updated for Realme UI too.
1. Download and install the unlock tool apk on your phone. download apk from below:
a. For Color Os-> Depth test file
b. For Realme Ui ->Depth test file
2. Follow the detailed steps below to unlock the bootloader.
a. Open unlock tool.
b. Click “Start applying”.
c. Please read the disclaimer in detail, select the checkbox, and submit your application.
d. The application will be checked by realme servers.
e. Within approximately 1 hour, the unlock tool apk will show the status of the unlock request - if it shows the unlocking is successful, please proceed to the following step.
f. You can now click “Start the in-depth test” and the device will reboot automatically.
3. Download the ADB tool and after extracting zip file open folder minimal_adb_fastboot in PC.
a. Click on file “cmd-here” to open command prompt (CMD) or you can manually open CMD by holding Shift key and Right-click on the screen to open command prompt window.
b. In CMD type- “fastboot devices” and press enter to verify that your device is being detected. If not, install ADB drivers first or reconnect your phone to a different port of PC then try again.
c. In CMD type- “fastboot oem unlock” and press enter to unlock the bootloader.
d. Now on phone, a message like in below image will appear. In phone select the "unlock the bootloader" menu by pressing the volume button down and then press the “power button” to finally unlock the bootloader of phone.
e. After pressing the power button your phone will boot into Color OS by wiping phone and bootloader is now unlocked.
Click to expand...
Click to collapse
TWRP(Recovery installing): Follow below steps one by one.
--- Very Imp **** take a complete backup of the phone just after booting into twrp using this guide ****
1. The bootloader of your phone must be unlocked.
2. Download TWRP and Vbmeta.img file and rename TWRP file to “twrp.img” and copy both files to folder “minimal_adb_fastboot”
3. Power off the phone then press and hold the VOLUME DOWN button with POWER button for 3 seconds and your phone will be booted into bootloader mode.
4. Click on file “cmd-here” in folder minimal_adb_fastboot to open the command prompt (CMD)
5. Follow step 3.b of Unlocking method to check that phone is connected with the PC properly.
6. In CMD type- “fastboot flash recovery twrp.img” to flash TWRP and wait for the confirmation screen/message.
7. Now in CMD type- "fastboot flash vbmeta vbmeta.img" to flash vbmeta file.
8. After flashing vbmeta, follow below final steps.
a. In phone press volume down button to select “Recovery mode”
b. Press the power button to boot in recovery.
c. A message “Unmodified System Partition” will appear and uncheck menu “Never Show……..” and Swipe to allow modification.
d. Make a backup of all partitions to an external sd card.
e. From twrp reboot to recovery first and then reboot to the system.
Click to expand...
Click to collapse
Rooting: Follow below steps one by one.
--- Very Imp ****TWRP must be installed in your phone otherwise follow the above steps to install TWRP****
1. Make a backup first using TWRP before proceeding to the next steps.
2. Download the latest Stable Magisk version and Stable Magisk Manager. Link to Magisk+Manager.
3. (You can skip this step if you are on RUI) Download Magisk fix and Redblink Patch(SystemUI) file.
4. Copy all 4 (2 files from step 2, if you are on RUI) files downloaded above to either external sd card or internal memory.
5. Power off the phone then press and hold the VOLUME DOWN button with POWER button for 3 seconds and your phone will be booted into bootloader mode.
6. Press the volume down button to select “Recovery Mode” and press the power button to boot in recovery.
7. Now follow below final steps:
a. In TWRP recovery navigate and Flash Magisk file.
b. (Skip this step if you are on RUI) Flash Magisk patch file and reboot phone to system.
c. (Skip this step if you are on RUI) To fix the red blinking issue(rooted warning) in status bar of phone, follow steps 6 and 7 of this guide and flash SystemUI patch file and reboot.
d. If Magisk manager is missing in the app drawer of your phone(rooted+magisk flashed) then install magisk manager file downloaded in step 3 of rooting method.
e. If Magisk manager showing core mode only then uncheck "magisk core only mode" in the setting of magisk and reboot your phone.
Click to expand...
Click to collapse
Back to Stock, UNBRICK and Fastboot Flash: Follow below steps one by one. INDIAN VARIANT ONLY
1. Follow this guide to flash stock Colour os again on a rooted stock os, any custom rom flashed phone and phone booting to recovery only.
2. Download fastboot firmware from here. Indian Variant only.
3. Download platform-tools from here and extract to drive in your PC.
4. Extract downloaded fastboot firmware zip file and copy all files to platform tool folder.
5. Download Vbmeta.img file and replace with existing Vbmeta.img in platform folder(where firmware was extracted).
6. Open CMD by holding Shift key and Right-click on the PC to open command prompt window.
7. Power off the phone then press and hold the VOLUME DOWN button with POWER button for 3 seconds and your phone will be booted into bootloader mode and Follow step 3.b of Unlocking method to check that phone is connected with the PC properly.
8. Execute below commands one by one.
fastboot -w && fastboot erase system
fastboot flash boot boot.img
fastboot flash system system.img
fastboot flash vendor vendor.img
fastboot flash vbmeta vbmeta.img
fastboot reboot
Now your phone is back to stock Color os again. Follow above TWRP and ROOT methods if you wants to root your stock os again.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
All In One Link to all files required above.
Credits:
@thesprintster & @BabluS for recovery and vbmeta.
@topjohnwu for magisk.
:good:Don't forget to Click Thank's, if this guide helps.:good:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Enviado desde mi RMX1971 mediante Tapatalk
4. Download Redblink Patch(SystemUI)
its for realme5pro? becouse the firmware only A09 and A11
SystemUI_Patched_A19.zip ???
have u ever flash it
pocepoke said:
4. Download Redblink Patch(SystemUI)
its for realme5pro? becouse the firmware only A09 and A11
SystemUI_Patched_A19.zip ???
have u ever flash it
Click to expand...
Click to collapse
Yes. I have tried all files in this guide for my Realme 5Pro Indian variant. No issues till now. I have manually upgraded my phone from A09 to A11 then tried all above steps.
Kaushikradhey said:
Yes. I have tried all files in this guide for my Realme 5Pro Indian variant. No issues till now. I have manually upgraded my phone from A09 to A11 then tried all above steps.
Click to expand...
Click to collapse
thx a lot,
i will tried upgrade to A11, couple days ago there isnt any upgrade to A11 from realme server indonesia
3. Download the latest Stable Magisk version and Stable Magisk Manager. Link to Magisk+Manager. ( https://drive.google.com/file/d/16CnHbb6s2vhnkYGc4nb2WIUgOnHkp5X4/view )
i think its wrong link there no magisk just minimal_adb_fastboot_1.4.3_portable.zip
e. If Magisk manager showing core mode only then uncheck "magisk core only mode" in the setting of magisk and reboot your phone.
i follow your guide for rooting but magisk core only mode even i disable the core only mode when restart it come back to core only mode, im using magisk v20 zip
im on colorOS 6 v11 rightnow
Has any anybody with the european version of this phone been able to unlock it?
I have tried with both A09 and A11 firmware, but it always says that my phone model is not supported by in-depth test.
tonibm19 said:
Has any anybody with the european version of this phone been able to unlock it?
I have tried with both A09 and A11 firmware, but it always says that my phone model is not supported by in-depth test.
Click to expand...
Click to collapse
I'm from Spain, and I can't unlock it, I will call to Realme if I can because I want unlock it.
Enviado desde mi RMX1971
tonibm19 said:
Has any anybody with the european version of this phone been able to unlock it?
I have tried with both A09 and A11 firmware, but it always says that my phone model is not supported by in-depth test.
Click to expand...
Click to collapse
Josegames all said:
I'm from Spain, and I can't unlock it, I will call to Realme if I can because I want unlock it.
Enviado desde mi RMX1971
Click to expand...
Click to collapse
is there european version?
as far i know is only 2 version, rm5pro India (global) realme Q (china)
mybe u can change region on settings -> language & region to mybe unloked region like india or like me indonesia
im using relame5pro and realme2pro (wife ) it can be unlocked easy when the unlock application is out from realme
pocepoke said:
is there european version?
as far i know is only 2 version, rm5pro India (global) realme Q (china)
mybe u can change region on settings -> language & region to mybe unloked region like india or like me indonesia
im using relame5pro and realme2pro (wife ) it can be unlocked easy when the unlock application is out from realme
Click to expand...
Click to collapse
I tried, but I can't, it's really uncomfortable, so I sent an email to Realme...
Enviado desde mi RMX1971
Thereis bug in Color OS 6 RMX1971EX_11_A.11
Cant get into fastboot, only show fastboot logo then automatically reboot
Hi dears.
Im from Spain too, and I cant Open Bootloader. I have tried a.9 and a.11 version, but both of them appear "model is not supported by in-depth test".
Im waiting for new Update or help to unlock and delete Color OS.
Thanks for all
I bricked phone
I bought my phone in India so I presume that it is indian variant. First installed TWRP and LOS and everything was ok. Then tried with magisk but got ERROR 1 cannot mount system. So I taught that maybe flashing the latest firmware will change something. So I flashed firmware. And brick. I attach photos. Please kindly help me
https://www.photobox.co.uk/my/photo?photo_id=502381335672&album_id=5753911027
https://www.photobox.co.uk/my/photo?album_id=5753911027&photo_id=502381334149
https://www.photobox.co.uk/my/photo?photo_id=502381334736&album_id=5753911027
FIXED
I unbricked the device by "unbrick" guide
But why there is problem with flashing magisk?
Hi all. I'm considering buying this phone but bootloader & root is a must.
It's possible to unlock bootloader in the EU (global) version? I read that EU and India versions are the same but I'm not 100% sure about this.
Does anyone from Europe unlocked it?
Regards
Like_Gg said:
Hi all. I'm considering buying this phone but bootloader & root is a must.
It's possible to unlock bootloader in the EU (global) version? I read that EU and India versions are the same but I'm not 100% sure about this.
Does anyone from Europe unlocked it?
Regards
Click to expand...
Click to collapse
Can't unlock in Europe, just wait...
Enviado desde mi RMX1971
Josegames all said:
Can't unlock in Europe, just wait...
Enviado desde mi RMX1971
Click to expand...
Click to collapse
Will it be unlocked someday?
I have indian version n trying to unlock bootloader...after trying indept apk...its shows success review but it doesn't goes to fastboot mode...its reboot to system...why...please help
O E M unlock
In my Indian Rm5P /Settings/Additional Settings/Developers Options there is a provision for enabling O E M Unlock.What is this meant for? Whether I have to enable this before starting the in-depth tool?Or whether the BootLoader will be unlocked automatically if I enable this?
---------- Po
If I unlock bootloader and flash TWRP, this TWRP can be used as my stock recovery further flashing zips(not custom ROMs)? Also will Bank apps work in this set up without any problems?
official post from realme :
https://c.realme.com/in/post-detail...64863306907648&subForumId=1163757213450240000
It works with:
- Xiaomi Redmi Note 9
- Xiaomi Redmi 10X 4G
- Probably some others Xiaomi devices
How to backup:
Step 1:
Unlock your bootloader.
Step 2:
Backup partition: seccfg
You can backup it using the SP FLASH TOOL, TWRP or copy it with DD, you can do what you prefer.
Keep it in your files for later use.
How to restore:
To restore your UNLOCKED BOOTLOADER, you need to restore seccfg partition of the backup in step 2.
You can flash it using the SP FLASH TOOL: https://forum.xda-developers.com/t/...for-merlin-redmi-note-9-redmi-10x-4g.4229937/
SECCFG:
Code:
linear_start_addr: 0x17800000
partition_size: 0x800000
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
(If you try to restore your seccfg partition between different devices, it will not work.)
Good luck.
Do you need help with your MERLIN device ?
Read this FAQ: https://forum.xda-developers.com/t/...for-merlin-redmi-note-9-redmi-10x-4g.4225163/
Hi i backed up the seccfg while my bl unlocked but i can't flash it can you help me ? my bl is locked right now
Sirpak said:
Hi i backed up the seccfg while my bl unlocked but i can't flash it can you help me ? my bl is locked right now
Click to expand...
Click to collapse
You can flash it easily using spflashtool or twrp.
Can you tell me how to do it it is .bin file and i don't know how to flash with sp flash tool and i don't have twrp too
Can you do a tutorial ?
Sirpak said:
Can you tell me how to do it it is .bin file and i don't know how to flash with sp flash tool and i don't have twrp too
Click to expand...
Click to collapse
[GUIDE] How to properly use the SP FLASH TOOL for MERLIN ? (Redmi Note 9 / Redmi 10X 4G)
Warnings: - If you try to flash in "firmware upgrade" mode, bootloader will be LOCKED again ! - NEVER try to flash in "format all" mode ! Otherwise, you will LOSE all secure and identifying infos for your device. Like IMEI and MAC. - Keep your...
forum.xda-developers.com
[GUIDE] How To bypass authentication and flash in EDL with NO auth for FREE
Thanks to: chaosmaster / k4y0z: GitHub / XDA xyzz / xyz`: GitHub / XDA Dinolek: GitHub / XDA How to install: 1. Download the attached file: VD171_MTK-bypass.zip. 2. Extract the file and open the folder. 3. Run and install python...
forum.xda-developers.com
Sirpak said:
Can you do a tutorial ?
Click to expand...
Click to collapse
I suggest you to watch some videos, the flashing using spflashtool is same to any device.
Still i can't do it i watched a few videos but videos not fixed my problem my bl is locked is it a problem for this operation
Sirpak said:
Still i can't do it i watched i few videos but videos not fixed my problem my bl is locked is it a problem for this operation
Click to expand...
Click to collapse
Locked bootloader is not a problem for flashing using spflashtool.
You can write some partitions even with locked bootloader, like preloader and seccfg.
Try to attach your screenshots, please.
İ'm trying to use download tab for flash seccfg while i just use seccfg it says please select at least one rom before execution. when i try with boot.img it says error status preloader invalid
Sirpak said:
İ'm trying to use download tab for flash seccfg while i just use seccfg it says please select at least one rom before execution. when i try with boot.img it says error status preloader invalid
Click to expand...
Click to collapse
Please, attach the screenshot.
this is with boot
Something is wrong right ? or anything i did is wrong
Sirpak said:
this is with boot
Click to expand...
Click to collapse
Try this:
#1. Dowload and extract the preloader-V12.0.4.0 -> https://forum.xda-developers.com/t/...omi-redmi-note-9-xiaomi-redmi-10x-4g.4218929/
#2. Enter in fastboot.
#3. Flash the preloader-V12.0.4.0:
Code:
fastboot flash preloader preloader-V12.0.4.0.bin
#4. Turn off the device.
#5. Go to SPFLASHTOOL and Flash what you want to flash. Remeber to plug the usb cable only and DON'T press any key. If you keep keys untouched the preloader-V12.0.4.0 will flash in download mode, so you don't need to bypass the edl mode.
Done.
I'm in 12.0.3 india rom isn't this going to be a problem ?
Sirpak said:
I'm in 12.0.3 india rom isn't this going to be a problem ?
Click to expand...
Click to collapse
So, you don't need to flash the preloader.
Did you flash the unlocked seccfg?
Did you try using the stock scatter file?
I tried to flash seccfg via fastboot but got an error.
I didn't tried the stock scatter file
I tried to flash seccfg via sp flash tool and got an error too i don't know what to do
I can't see the seccfg in the sp flash tool is this right ?
Sirpak said:
I can't see the seccfg in the sp flash tool is this right ?
Click to expand...
Click to collapse
Edit the stock scatter file.
Search for "preloader_merlin.bin" section and change from "is_download: false" to "is_download: true".
WARNINGS:
NEVER try to flash in "format all" mode ! Otherwise, you will LOSE all secure and identifying infos for your device. Like IMEI.
USE AT YOUR OWN RISK. I AM NOT RESPONSIBLE FOR YOUR ACTIONS.
Works with:
- Xiaomi Redmi Note 9
- Xiaomi Redmi 10X 4G
Downloads:
SP Flash Tool (Windows): https://spflashtools.com/category/windows
SP Flash Tool (Linux): https://spflashtools.com/category/linux
Scatter file: https://forum.xda-developers.com/t/...omi-redmi-note-9-xiaomi-redmi-10x-4g.4223097/
Download-Agent (DA) file: https://forum.xda-developers.com/t/...omi-redmi-note-9-xiaomi-redmi-10x-4g.4209765/
Method #1:
This method requires the download of the original stock rom firmware.
This method will ERASE userdata.
This method will LOCK bootloader again.
1. Download and extract the ORIGINAL STOCK ROM FIRMWARE.
2. Download and install SP Flash Tool.
3. Run SP Flash Tool and configure it properly, following this guide: https://forum.xda-developers.com/t/...for-merlin-redmi-10x-4g-redmi-note-9.4229939/
4. Select "Download" tab.
5. Click "Choose" button for finding the Scatter-loading. Go to the folder images, inside the extracted rom and select the file: MT6768_Android_Scatter.txt.
6. Open the download mode selection list and change from "Download Only" to "Firmware upgrade".
7. Press "Start".
8. Plug powered off phone to usb.
9. Wait until it finish.
Done.
Method #2:
1. Download and install SP Flash Tool.
2. Run SP Flash Tool and configure it properly, following this guide: https://forum.xda-developers.com/t/...for-merlin-redmi-note-9-redmi-10x-4g.4229937/
3. Select "Format" tab.
4. Select "Manual Format Flash".
5. Type the ADDRESS of the partition to "Begin Address".
5. Type the LENGTH of the partition to "Format Length".
6. Press "Start".
7. Plug powered off phone to usb.
8. Wait until it finish.
Done.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Partitions you need to format:
Partition: persistSize: 49.152 KiB (48 MiB)Block: /dev/block/mmcblk0p13Start address: 0x104a2000Length: 0x3000000
Partition: frpSize: 1.024 KiB (1 MiB)Block: /dev/block/mmcblk0p5Start address: 0x5508000Length: 0x100000
Do you need help with your MERLIN device ?
Read this FAQ: https://forum.xda-developers.com/t/...for-merlin-redmi-note-9-redmi-10x-4g.4225163/
Hello. I understand but I am noob and want to make sure I dont commit mistakes. I will use method 2. have miui 12.0.6, global phone Redmi Note 9 -Checked-. I downloaded scatter file "MERLIN--MT6768_Android_scatter--full--VD171.txt", download agent "DA_VD171--3.3001.2020-07-02020-07-14.bin", and put them on sp flash tool. did UNCHECK "LIB DA match" and UNCHECK "Storage Lite Cycle". Can I proceed to format persist and frp partitions following your steps or I need to flash something before? Am I missing something? It seems easy and a very unknown method. If I do it all carefully, are they serious risks of bricking phone? is it prudent to backup using readback first? Why do most "technicians" use server methods to unlock xiaomi account? Really thanks, I was looking for a solution months ago. My device is not blocked but I lost my sim -not at my name- and didnt have a email associated so this seems to be my unique option. Thanks, thanks, thanks!!
l0ggerbrk said:
Hello. I understand but I am noob and want to make sure I dont commit mistakes. I will use method 2. have miui 12.0.6, global phone Redmi Note 9 -Checked-. I downloaded scatter file "MERLIN--MT6768_Android_scatter--full--VD171.txt", download agent "DA_VD171--3.3001.2020-07-02020-07-14.bin", and put them on sp flash tool. did UNCHECK "LIB DA match" and UNCHECK "Storage Lite Cycle". Can I proceed to format persist and frp partitions following your steps or I need to flash something before? Am I missing something? It seems easy and a very unknown method. If I do it all carefully, are they serious risks of bricking phone? is it prudent to backup using readback first? Why do most "technicians" use server methods to unlock xiaomi account? Really thanks, I was looking for a solution months ago. My device is not blocked but I lost my sim -not at my name- and didnt have a email associated so this seems to be my unique option. Thanks, thanks, thanks!!
Click to expand...
Click to collapse
If you are unsure, just backup them using the readback first.
But, you do NOT need to flash anything before of the format.
Do I need to unlock bootloader in order to unlock mi account using method 2?
VD171 said:
If you are unsure, just backup them using the readback first.
But, you do NOT need to flash anything before of the format.
Click to expand...
Click to collapse
l0ggerbrk said:
Do I need to unlock bootloader in order to unlock mi account using method 2?
Click to expand...
Click to collapse
No
l0ggerbrk said:
Do I need to unlock bootloader in order to unlock mi account using method 2?
Click to expand...
Click to collapse
No, you do not need unlocked bootloader for that
VD171 said:
No, you do not need unlocked bootloader for that
Click to expand...
Click to collapse
hi
well sounds dumb..but my device is locked and you wrote device has to be shut off..but i cant shut it it off..if i hold power..it just restarts..if i hold power and vol down it also just turns off for a second starts again....any solution?
dante2903 said:
hi
well sounds dumb..but my device is locked and you wrote device has to be shut off..but i cant shut it it off..if i hold power..it just restarts..if i hold power and vol down it also just turns off for a second starts again....any solution?
Click to expand...
Click to collapse
Your device will be detected between one reboot and the next reboot, even if the device got in bootloop.
does this work on other xiaomi phones ?
newrandomaccountbruh said:
does this work on other xiaomi phones ?
Click to expand...
Click to collapse
Probably, yes.
VD171 said:
Probably, yes.
Click to expand...
Click to collapse
i need to unlock my device redmi note 10 pro max as i lost my sim card and get mutiple time rejected when trying to reset it via mi cloud support page. it tells to retry from internet and device u use often
do i need special scatter ?
thanks
muxans said:
i need to unlock my device redmi note 10 pro max as i lost my sim card and get mutiple time rejected when trying to reset it via mi cloud support page. it tells to retry from internet and device u use often
do i need special scatter ?
thanks
Click to expand...
Click to collapse
I have no ideia about how to do that, my friend.
This thread is specific for redmi note 9 (MERLIN).
@VD171
Hey man, sorry for bothering you, can I use method 1 for xiaomi mi 8 / mi 8 pro with snapdragon cpu ?
I have a problem with locked Mi account, don't have a sim card associated with the account, and my bootloader is unfortunately locked ..
Please, can you help me ? I'm desperate.
KTBFFH1905 said:
@VD171
Hey man, sorry for bothering you, can I use method 1 for xiaomi mi 8 / mi 8 pro with snapdragon cpu ?
I have a problem with locked Mi account, don't have a sim card associated with the account, and my bootloader is unfortunately locked ..
Please, can you help me ? I'm desperate.
Click to expand...
Click to collapse
I have no ideia about how to do that on snapdragon.
will it work on redmi 9 M2004J19AG mediatek MT6769T MIUI Global 12.0.1 ? I cant find Scatter file for MT6769T
darko12 said:
will it work on redmi 9 M2004J19AG mediatek MT6769T MIUI Global 12.0.1 ? I cant find Scatter file for MT6769T
Click to expand...
Click to collapse
I'm not sure.
Can i use Scatter file for MT67698 or is there other method to remove mi account, I bought used phone with logged mi account , phone isnt blocked but I cant format
darko12 said:
Can i use Scatter file for MT67698 or is there other method to remove mi account, I bought used phone with logged mi account , phone isnt blocked but I cant format
Click to expand...
Click to collapse
I'm not sure.
The frp is gone but the mi account when I am connected to the network is locking again....
sakis0547 said:
The frp is gone but the mi account when I am connected to the network is locking again....
Click to expand...
Click to collapse
Frp only is not enough.
You may try removing micloud totally.
WARNING: We are not responsible to any damage you might have done to your device. Always follow the instructions CAREFULLY.
This thread is about flashing custom roms properly on your Redmi Note 9, specifically Redmi 10x 4g (Merlin). Make sure you've backup everything (Files, Apps etc) since it includes wiping your entire internal storage.
PRE-REQUISITE:
1. MIFLASH TOOL:
Download Xiaomi Flash Tool - Official Xiaomi Mi Flash Tool Download
Download Xiaomi Flash tool is for Xiaomi smartphone and tablet device users that runs on Windows PC platforms to flash fastboot firmware files on Xiaomi smartphones. All versions of Xiaomi Mi Flash Tool download is available here
xiaomiflash.com
2. XIAOMI UNSIGNED DRIVERS (HIGHLY RECOMMENDED):
xiaomi_usb_driver.rar
drive.google.com
Check this site first for more info about it:
https://c.mi.com/thread-3312019-1-0.html
3. SP FLASH TOOL (FOR BACKING UP THE IMEI):
SP Flash Tool for Windows (all versions)
SP Flash Tool for Windows enables users to flash Stock Firmware (ROMs), unbrick bricked devices, upgrade or downgrade their operating system, and perform advanced tasks like memory testing and parameter editing.
spflashtools.com
For a clear instructions on backing up the IMEI:
4. ADB and Fastboot drivers:
[OFFICIAL][TOOL][WINDOWS] ADB, Fastboot and Drivers - 15 seconds ADB Installer v1.4.3
15 seconds ADB Installer v1.4.3 ADB, Fastboot and Drivers What is this? This is All-in-One installer for 3 most needed PC tools for Android. No need to download big SDK for 3 small things. I originaly made it for my Kurdish friend AnGrY DuDe in...
forum.xda-developers.com
5. MTK Drivers (Recommended)
MTK_driver
MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.
www.mediafire.com
6. Xiaomi Fastboot Rom (Indonesia version)
NOTE: Choose wisely since it requires one of the given fastboot roms to be installed for a specific reason:
a. Xiaomi Redmi note 9 Indonesia (ID) Fastboot ROM MIUI V12.0.1.0.QJOIDXM (Required for installing Custom Roms such as Pixel Experience, LIneageOS etc)
Download Redmi 10X 4G / Note 9 (merlin) V12.0.1.0.QJOIDXM MIUI 12 Stable Full Rom | XiaomiROM.com
The Stable update V12.0.1.0.QJOIDXM has been officially released for Redmi 10X 4G / Note 9 (codename is merlin). Before updating, please make sure you …
xiaomirom.com
b. Xiaomi Redmi note 9 Indonesia (ID) Fastboot ROM MIUI V11.0.2.0.QJOIDXM (For installing ports by Communos such as ShapeshiftOS, Bliss etc.)
Download Redmi 10X 4G / Note 9 (merlin) V11.0.2.0.QJOIDXM MIUI 11 Stable Full Rom | XiaomiROM.com
The Stable update V11.0.2.0.QJOIDXM has been officially released for Redmi 10X 4G / Note 9 (codename is merlin). Before updating, please make sure you …
xiaomirom.com
INSTRUCTIONS:
Flash Indonesian fastboot rom on a Global Variant via ADB and Miflash
Turn off phone and reboot to fastboot. Connect the said device to PC.
In PC, run cmd-here.exe in the adb directory and enter:
fastboot reboot fastboot
//.(this will take you to fastbootD where you can access the "super" partition consisting of:
system.img
vendor.img
product.img ).//
fastboot erase system
fastboot erase vendor
fastboot reboot bootloader to enter bootloader
Make sure you backup the IMEI to ensure safety before flashing via SP Tools.
Download an Indonesian fastboot rom from source then flash it to phone via MIFlash. (Recommend: 12.0.1 or lower)
After flashing, reboot the device and viola, you've got an Indonesian version of the MIUI to your Global Variant Device.
Flashing TWRP on a Redmi Note 9
Download the said recovery from this link below
"https://drive.google.com/uc?id=1TPdi1UGf_kUxFOdTl3u8xY5h-aQUDz9h&export=download"
Reboot device to bootloader and connect to PC.
In PC, run adb and type
"fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img" (vbmeta from the indonesian fastboot rom, NOT from the Global fastboot rom)
"fastboot flash recovery recovery.img"
"fastboot reboot recovery"
After that, the recovery should be working.
FLASHING CUSTOM ROM (for 12.0.1.0) OR PORT (11.0.2.0)
Flashing a Custom Port.
Download a Custom Port from a telegram or the links provided below (made by Communos)
Bliss port
https://drive.google.com/uc?id=1wLAJkQvqS0A8EtNbOpGUdmo4oO0XZnl3&export=download
Lineage port
https://tdrive.elytra8.workers.dev/LineageOS%2017.1%20Port%20Merlin.zip
crDroid Port
Google Drive - Quota exceeded
drive.google.com
ShapeshiftOS port
https://drive.google.com/uc?id=1zQNHf67S8UQfgQT5qE0jtVIN2pDzjZnw&export=download
Then, connect phone to PC and copy your preferred rom to SDCard (Memory card is recommended).
Reboot your phone to recovery.
In TWRP, you have to wipe data, dalvik, cache and internal storage.
Select install and choose the rom from SDcard. Then, flash it.
Reboot your device.
Viola, you just installed a custom port or rom to your device.
Note: I will add more detail in the future but right now, if you have questions, please ask in this thread.
Special Thanks to:
@Communos
@VD171
You forgot fastboot reboot fastboot before fastboot erase system, it's an important step.
And before flashing the Port, you have to wipe data, dalvik, cache and internal in TWRP.
Would appreciate if credits are added in the guide.
[Q&A] [ Updated on 02-16-2021]
Q. My UI lags after I flashed these ports, what should I do?
A.
From Communos,
...
If your UI lags, place props_conf in internal storage,flash MagiskHide Props config module in magisk manager and reboot
Props conf link: https://drive.google.com/file/d/1g8B2DIsz-l7oDBYpUdi3dXUsEPU35H9s/view?usp=sharing
....
Click to expand...
Click to collapse
Q. Why do I need to flash these ports/ roms?
A.
From what I have seen, MIUI is very meticulous in secretly invading someone's privacy. This was said by @phhusson and @erfan that GSI Ports are more secure than MIUI.
Proof (Picture not mine, from twitter took by Communos)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
c.whoopee said:
Sorry about that. I fell asleep right before I put the credits and other details. my bad
Click to expand...
Click to collapse
The guide looks great now
Communos said:
The guide looks great now
Click to expand...
Click to collapse
Thanks, man... So anything that I would add?
c.whoopee said:
Thanks, man... So anything that I would add?
Click to expand...
Click to collapse
You can add the UI lag fix mentioned in the end of this post
Building Rom from Source for Redmi Note 9/10X Merlin
Hello guys, I was planning to build a rom from source so that we can start integrating different custom roms for our devices. I have a rig with good specs and a good internet connection too. What roms do you suggest to build? I was kinda...
forum.xda-developers.com
I booted into fastbootd then erased System , Vendor & Product then I booted to bootloader & flashed the Indonesia ROM Using Fastboot Then when I Reboot It stuck Into Bootlogo & Keeps Rebooting..
Note : I'm Still able to boot to Fastboot & Recovery
Help Pls..
Rhythm113 said:
I booted into fastbootd then erased System , Vendor & Product then I booted to bootloader & flashed the Indonesia ROM Using Fastboot Then when I Reboot It stuck Into Bootlogo & Keeps Rebooting..
Note : I'm Still able to boot to Fastboot & Recovery
Help Pls..
Click to expand...
Click to collapse
did you fixed it?
Jhon_Locke said:
did you fixed it?
Click to expand...
Click to collapse
Yes I switched to global again..
Hello, when doing inside fastboot
fastboot reboot fastboot
it reboots to TWRP instead.
What can be the cause?
0xSteeW said:
Hello, when doing inside fastboot
fastboot reboot fastboot
it reboots to TWRP instead.
What can be the cause?
Click to expand...
Click to collapse
I'm not sure, but I think you can't reboot to fastboot inside the fastboot.
Try
fastboot reboot bootloader
Nevermind, seems that TWRP implements user space fastboot (basically TWRP works as fastbootd when connected to the PC.
This can be verified with:
fastboot getvar is-userspace
0xSteeW said:
Nevermind, seems that TWRP implements user space fastboot (basically TWRP works as fastbootd when connected to the PC.
This can be verified with:
fastboot getvar is-userspace
Click to expand...
Click to collapse
TWRP, PBRP and other recovery projects are so essential than Magisk
Has anyone tried this method and got it working successfully? I want to know before going ahead.
yes,it is working perfectly
c.whoopee said:
Flashing TWRP on a Redmi Note 9
Download the said recovery from this link below
"https://drive.google.com/uc?id=1TPdi1UGf_kUxFOdTl3u8xY5h-aQUDz9h&export=download"
Click to expand...
Click to collapse
the link does not work
I second that: Link does not work; I tried TWRP for V11.0.4.0.QJOCNXM which is then stuck on bootscreen.
EDIT: Download working again and I just installed Lineage 18.1. Love you, guys!!
Apologies for the newbie (to flashing redmi devices) question but I can't get SP Flash tool to back up the IMEI. Drivers are all on, but when you plug in the phone to the USB cable nothing is read back. Do I need to have unlocked the bootloader before this works? I'm still waiting for mine to be allowed
The Xiaomi Unlock tool doesn't recognize the phone. I installed the drivers in the fist post of this thread, but still. Any idea?
Hi all. Can I backup the IMEI code using the scatter file from the Indonesian 12.0.1 ROM, or must I use the latest stock?
Hey Guys,
Many users downgraded their ColorOs12 to ColorOs11.3 on oppo reno6 5G device due to many bugs on it, they want to install ColorOs12 but they are not getting OTA update, they are wandering how can they install ColorOs 12 back on their phone, So, here I have come up with a method to directly flash ColorOS12.
Note: Data will(or might) be erased in this method so please take backup of you data on phone.
This has been tested on Indian version, I am not sure if it will work for other countries.
I strongly recommend to take full firmware backup using method below before proceeding
Backup full firmware(ROM) of any MediaTek device using MTK client| Oppo reno6 5G | MT6877
Hello Guys, Many times we encounter a situation where we need to do some software update, flash custom ROM, install stock ROM etc, so it is advisable to take full firmware/ROM backup of your device. If required then you can flash this backup to...
forum.xda-developers.com
Step1: Pre-requisite -Installing required drivers and setup
From link below download drivers and setup.
Install mediatek driver.
Install python (during installation of python please select "install for all user" from customization and tick add path to system variable)
install usbdk.
download extarct Mtk client tool.
go to folder where you extract mtk client
View attachment 5541629
open cmd here and run below command
cd mtkclient
pip3 install -r requirements.txt
In default setting it takes 2 hour to flash but after change it takes 13 min. If you want to increase flashing speed then open mtk_daxflash.py file from library folder, search "dsize = min(length, 0x200)" and replace it with "dsize = min(length, 0x2004)" , save and close the file.
You need to close command prompt in order to take effect of change.
Reference(https://github.com/bkerler/mtkclient/issues/271)
New Qcom Mtk Driver V3.0.5.1.rar | by TUSER HP for Generic Device/Other
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com
Download Python
The official home of the Python Programming Language
www.python.org
GitHub - bkerler/mtkclient: MTK reverse engineering and flash tool
MTK reverse engineering and flash tool. Contribute to bkerler/mtkclient development by creating an account on GitHub.
github.com
Releases · daynix/UsbDk
Usb Drivers Development Kit for Windows. Contribute to daynix/UsbDk development by creating an account on GitHub.
github.com
Step2: Download and extract the ColorOs 12 firmware
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CPH2251_11_C.27_ColorOS12_Android12_Latest.rar
drive.google.com
Step3: Flash the firmware
on cmd type below command to flash the firmware
python mtk wl "ROM location full path"
it will wait for devices.. Power off the phone, wait 10 sec then press vol up + vol down together and then plug the usb cable.
Once device detected , it will display devices information and start flashing
View attachment 5541639
View attachment 5541641
View attachment 5541645
While flashing it will dump the preloader, this file is very important so, please keep this file safely. this file may require in future.
View attachment 5541661
Step4: Boot the phone
Once flashing completed, press vol up + power button together for 30 sec. Wait for device to boot.
Step5: Flashing the preloader.bin (only if required)
In case, even after flashing completed successfully but some time device does not boot, only black screen, no charging sign either then don't panic, device has entered into emergency download mode, if you face the same then it's time to flash preloader.bin file. Follow below steps
1) download SP flash tool specific version v5.2148. (https://androidmtk.com/smart-phone-flash-tool)
2) download attached preloader.bin, scatter file and auth file from link below and place all these files at same folder.
MT6877_flashing_preloader.zip
drive.google.com
3) open sp flash tool, select download agent files from mtk folder as shown on image and load scater file and auth files respectively.
View attachment 5581171
4) In cmd run command "python mtk payload". Now press and hold vol+ vol- or all the buttons together, it should show payload sent successfully.
5) Now in sp flash tool click on Download button, it should flash the preloader successfully.
6) once preloader is flash successfully you can turn on the phone by pressing vol+ and power button together for 20 sec. If attached preloader does't flash then you can try flashing your device backup preloader.bin created/shown on step3.
so by this way we directly flashed ColorOS 12 on oppo reno6 5G.
Tips: If due to some reason flashing did not completed successfully then please press vol up and power button together for 30-40 sec to boot the phone (exit the brom mode).
Disclaimer: I have tested this method on my phone, it's 100% working but I will not responsible if damage any damage happens to your device while doing this. So do it at your own risk.
thanx nand for helping me in upgrading to coloros 12 again,this process worked successfully.
Thanks for the info.
My question is: can I use this method to remove phone branding using stock firmware image you pointed in your post?
macslui said:
Thanks for the info.
My question is: can I use this method to remove phone branding using stock firmware image you pointed in your post?
Click to expand...
Click to collapse
Hi, i didn't understand your question. Can you explain more.
Nand kumar said:
Hi, i didn't understand your question. Can you explain more.
Click to expand...
Click to collapse
Sorry. Try to better explain: I have a Vodafone branded reno 6 that accept any sim card. I only want to remove Vodafone branding (boot logo and custom app that are present only in branded phone).
Yes, you can try. I recommend you to take full firmware backup before doing this as explained in guide.
bonjour a tous quand j'écrit pip3 install -r requirements.txt j'ai une erreur :
ERROR: could not open requirements file :[Errno2] no such file or directory: requirements.txt
merci de m'aider
Please run this command from mtk folder
Nand kumar said:
Yes, you can try. I recommend you to take full firmware backup before doing this as explained in guide.
Click to expand...
Click to collapse
Hi Nand, I've done everything as you pointedout in this document and backup document.
Unfortunately I was able to flash the phone with success but now it do not turn it on anymore.
I've tried to every button combination but it remain off.
I also cannot enter brom mode anymore.
Have you some suggestion?
Thanks!
macslui said:
Hi Nand, I've done everything as you pointedout in this document and backup document.
Unfortunately I was able to flash the phone with success but now it do not turn it on anymore.
I've tried to every button combination but it remain off.
I also cannot enter brom mode anymore.
Have you some suggestion?
Thanks!
Click to expand...
Click to collapse
I was able to reenter brom mode. Now I'm reflashing again.
Hi all, everything ok now. I've flashed COS12 and now my phone is non more brand (vodafone) related.
Nand kumar said:
Please run this command from mtk folder
Click to expand...
Click to collapse
ok merci je ne savais pas comment ouvrir cmd a partir d'un fichier fonctionne très bien merci
macslui said:
Hi all, everything ok now. I've flashed COS12 and now my phone is non more brand (vodafone) related.
Click to expand...
Click to collapse
macslui said:
Glade to hear that you removed brand using thus method.
Click to expand...
Click to collapse
Unfortunatly COS12 in my opinion Is very laggy. I'm trying tio rollback to COS11 but, after flashing using your guide, the phone do not boot anymore. So I have to go back to 12. It's only my experience on COS12?
Hi, for many peoples, Color os12 was not laggy but have some bugs like battery draining etc.
For your device is not booting on color 11 then you have to flash preloader using Sp flash tool version v5.2148
Thanks Nand, allways ready to answer, thanks! Can please explain how to flash preloader with SP flash tool please? I have preloader from backup. Thanks again for your support.
Removed ...
macslui said:
Thanks Nand, allways ready to answer, thanks! Can please explain how to flash preloader with SP flash tool please? I have preloader from backup. Thanks again for your support.
Click to expand...
Click to collapse
Removed my contact details as I was getting to many message/calls on phone.
macslui said:
Hi Nand, I've done everything as you pointedout in this document and backup document.
Unfortunately I was able to flash the phone with success but now it do not turn it on anymore.
I've tried to every button combination but it remain off.
I also cannot enter brom mode anymore.
Have you some suggestion?
Thanks!
Click to expand...
Click to collapse
Same happen with me.. My phone is not bootibg up , no logo, no charging logo, not even single sign for alive please help me out help help
Cosmicsh said:
Same happen with me.. My phone is not bootibg up , no logo, no charging logo, not even single sign for alive please help me out help help
Click to expand...
Click to collapse
Removed my contact details as I was getting to many message/calls on phone.