Frist off I'm not Responsible for anything that happens to your phone!!!
DO NOT FLASH UNLESS YOU TRIED EVERYTHING ELSE FIRST INDIA MSM TOOL TO FIX YOUR HARD BRICKED T-MOBILE 9PR0!!!!
DO THIS AT YOUR OWEN RISK!!!
DISCLAIMER: THIS WILL PERMANENTLY MODIFY YOUR DEVICE TARGET ID WITH ALL MSMTOOL'S
FIRST HOW TO FIX HARD BRICKED TMO 9PRO
SO I HARD BRICKED MY TMO 9PRO JUST STAYED ON A BLACK SCREEN COULD NOT BOOT RECOVERY NOR FASTBOOT
T-MOBILE MSM TOOL WOULD NOT WORK AT ALL
WITH SOME HELP FROM OTHER MEMBERS I FINALLY GOT IT BACK UP AND GOING
WITH THESE STEPS
DOWNLOAD THE LATEST
INDIA MSM TOOL
UNZIP AND OPEN
SET TARGET TO IN
ONLY CHECK AUTO REBOOT AND LITE FIREHOSE
CLICK START
PLUG DEVICE INTO THE COMPUTER
LET IT RUN
ONCE BOOTED
CONNECT TO WIFI DUE TO YOU WILL HAVE NO SIGNAL DUE TO NO MODEM
SKIP THROW SETUP
ENABLE DEVELOPER OPTIONS THEN OEM UNLOCK
REBOOT TO FASTBOOT
OPEN TERMINAL
RUN: FASTBOOT OEM UNLOCK
HIGHLIGHT YES ON DEVICE SCREEN WITH THE VOLUME DOWN KEY
PHONE WILL REBOOT
ONCE REBOOTED
BOOT BACK TO FASTBOOT
AND FLASH TMO MODEM
I RECOMMEND USING THIS
TMO MODEM
HAS MODEM AND FLASH SCRIPT
JUST EXTRACT AND RUN SCRIPT
REBOOT AN SIGNAL IS BACK
PLEASE KEEP IN MIND YOU CAN NOT
FLASH STOCK WITH REGULAR T-MOBILE MSM TOOL EVERY AGAIN
NOR FLASH EU CONVERSION MSMTOOL
It's will the Target IN error Everytime
DUE TO THIS METHOD PERMANENTLY CHANGES YOUR DEVICES TARGET ID TO (IN) WITCH IS INDIA
BUT YOU CAN FLASH EITHER OR VIA LOCAL UPGRADE OR WITH MY FASTBOOT ROM WITH UNLOCK BOOTLOADER
ONEPLUS WILL NOT HELP YOU AFTER THIS PROCESS (I TRIED LOL)
HOW TO FLASH T-MOBILE STOCK FIRMWARE WITH MODIFIED MSMTOOL FIX
FLASH THIS AT YOUR OWEN RISK!!!
DISCLAIMER: THIS IS A MODIFIED OPS FILE I MADE FOR T-MOBILE MSM TOOL AND TMOBILE 9PRO ONLY.
I HAVE TESTED THIS WITH MY OWN DEVICE AND A TESTER Libra420T SUPER BIG THANKS TO HIM
THIS WILL ALLOW YOU TO REVERT BACK TO T-MOBILE FIRMWARE IF EVERY NEED OR WANTED
I MODIFIED THE OPS FILE TO HAVE MSM TOOL BYPASS THE WRONG TARGET ISSUE AKA PARAM
THIS MSM TOOL WILL ALLOW YOU TO RETURN BACK TO TMOBILE FIRMWARE ALSO RECEIVE OTA
MODIFIED MSM TOOL OOS11.2.6.6
ALL NEED FILES ARE IN LINK
THIS WILL WIPE ALL DATA!!!
AN RELOCK BOOTLOADER(MEANING TO OEM UNLOCK HAVE A ONEPLUS TOKEN)
DISABLE DIIVER SIGNATURE ENFORCEMENT
ADVANCED BOOT , TROUBLE SHOOT , START UP STEETING , REBOOT, TYPE 7, REBOOT INTO WINDOWS
INSTALL L2+DRIVERS
EXTRAT ZIP
OPEN L2 , OPEN 64, CLICK ON (QCSER64), VIEW CERTIFICATE
INSTALL, SELECT CURRENT USER, SELECT AUTOMATICALLY, THE FINISH
MUST HAVE QAULCOMM DRIVER'S INSTALLED AS
(QUALCOMM HS-USB QDLoader 9008)
FOR EDL TO WORK!!
CLICK LINK DOWNLOAD MSM TOOL
UNZIP
CLICK ON MSM TOOL
CLICK START
(IF IN OOS/ROM)
REBOOT TO EDL
( WITH COMMAND ADB REBOOT EDL IN TERMINAL)
(IF BRICKED!)
HOLD BOTH VOLUME UP AND DOWN
CONNECT TO PC
WHEN YOU SEE CONNECTED
LET IT RUN DEVICE WILL REBOOT ONCE DONE!!!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Wanna Buy me
Anytime brother
This is super dope and super important!!!
i have this error (firehose getufsinfo failed ) all the time and already tried all the edl packages here any help please
gebrel said:
i have this error (firehose getufsinfo failed ) all the time and already tried all the edl packages here any help please
Click to expand...
Click to collapse
Please screenshot and provide more information about the actions you have taken.
razercortex said:
Please screenshot and provide more information about the actions you have taken.
Click to expand...
Click to collapse
I did use the msm tools from xda forums and that what I get all the time this error my phone is oneplus9pro and it is the eu model 128 g 8 g ram
gebrel said:
I did use the msm tools from xda forums and that what I get all the time this error my phone is oneplus9pro and it is the eu model 128 g 8 g ram
Click to expand...
Click to collapse
This is for T-Mobile's LE2127 OnePlus 9 pro ......
You should be using EU MSM tool
Libra420T said:
This is for T-Mobile's LE2127 OnePlus 9 pro ......
You should be using EU MSM tool
Click to expand...
Click to collapse
i did used it but no use same error my friend also i used the india and the global same thing :S is my emc broken lol
I hope not.... Get log while running EU MSM
gebrel said:
i did used it but no use same error my friend also i used the india and the global same thing :S is my emc broken lol
Click to expand...
Click to collapse
You're good, I worked with craznazn to leak the EU tool.
gebrel said:
i did used it but no use same error my friend also i used the india and the global same thing :S is my emc broken lol
Click to expand...
Click to collapse
Can you take a picture of your fastboot if you can access it?
razercortex said:
Can you take a picture of your fastboot if you can access it?
Click to expand...
Click to collapse
The problem that it is a hard brick and I cant even see anything on the screen
gebrel said:
The problem that it is a hard brick and I cant even see anything on the screen
Click to expand...
Click to collapse
no fastboot, bootloader, recovery, or edl?
Ok, let's start simple.
I'm assuming your computer recognizes your phone correctly as QDloader 9008.
First, try to uninstall all Qualcomm drivers. Then, reboot your PC and use Windows Update to install the optional driver updates. If you're using Windows Update drivers right now, switch to using the drivers on craznazn's collection of MSM tools.
Problem solved everyone, the phone's broken, so there's little point of fixing it, the file system was corrupted.
razercortex said:
Problem solved everyone, the phone's broken, so there's little point of fixing it, the file system was corrupted.
Click to expand...
Click to collapse
Wow that's unfortunate
How does something like that happen?
Well it could be that dropping the phone damaged some of the pin connections or the UFS section on the chip, though I'm no expert.
damn.....
@Libra420T @FizzyAps where have you guys been?
TheKnux said:
@Libra420T @FizzyAps where have you guys been?
Click to expand...
Click to collapse
Unfortunately my father passed, and I was out of the game for a bit ... As for fizzy, M.I.A
Hey everyone
A friend if mine had his 9pro die mid conversion and is bricked after multiple trail and errors we were able to get the drivers and the MSMtool recognizing the phone but we are stuck at two points:
1- Using all MSMtools we can get our hands on from EU to TMO to Global to India (Multiple versions) and all will end up with [( Param Preload ) device not match]
2- Using your edited TMO MSMtool from this link https://drive.google.com/drive/folders/1CMLRWUkC1sj4z61Q_9_UvfDHwzRNOATb will give us another error which is unsupported target TMO
Its an LE2721 to confirm
At this point I guess the driver/phone situation is OK and only the correct MSMtool is needed right?
Related
If you can get in download mode, nothing is lost. You can still go back and restockify you LG Optimus G (stock rom ,locked bootloader ,no root).
Original Work by [email protected] I have only translated it to English
Tested and working on LG-E975
Some tips before you start
As you will see is a fairly simple procedure, but not without risk. Take a quick read the entire guide before you begin: it will help you understand how to move.
The most important thing is to keep calm, do not panic and do not crush random keys. If you do not understand a passage, reread it. If you have not figured it out yet, reread it AGAIN or ASK here for help. No one runs behind you, so do not do things in a hurry.
I DO NOT TAKE ANY RESPONSIBILITY IF YOU BRICK YOUR PHONE.
Given that at end of the flash is recommended to do a hard reset, is a good idea to make a backup of all your personal data (photos, videos, etc etc), contacts , and if you want even applications.
DON'T FORGET TO BACK UP EFS PARTITION!
Prerequisites
1. Download the KDZ with this tool (credits [email protected]) https://mega.co.nz/#!wxoHSayQ!AsUn6wfsc0rts87HIlOSwBd9dilot2229useWzrsH_g
2. Download and install the LG USB drivers LG USB Drivers
3. Download this file. It's a compressed file that contains everything you need NEW KDZ Updater
4. Download and install LG Mobile Support Tool http://csmg.lgmobile.com:9002/client/app/B2CAppSetup.exe
Let's start
1. Extract the "Flashtool" folder on the desktop, or where you want. Open the folder "Flashtool" and install msmxl.msi (if not already installed).
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
2. Turn off the phone and connect it to the PC with the USB cable while holding VOLUME- AND VOLUME +, until you see the download mode logo. The PC will install some drivers. There may be a kind of protection that prevents you enter this mode if there is too little current on the phone.
However, you must be able to get to the screen that's underneath.
4. Go back to Flashtool folder and run as administrator WindowsEnabler.exe. Go to the bar at the bottom right, and click once with the left mouse button over the icon of WindowsEnabler, so that appears the "On"message.
5. Now run as administrator UpTestEX.exe and do the following:
-Select the .KDZ file that you want to flash
-Set "3GQCT"
-Set PhoneMode "EMERGENCY"
Once done, click "Normal web upgrade test"
6. In the next window click "Upgrade Start"
7. Wait a few seconds an a new window will pop up.
- Click "Clear phone.."
- Select different country if you're not in Korea
- Select Language
- Click OK
After this the LG flashing tool should start analyzing your phone and flashing the .KDZ
Once done you can detatch the USB cable and see if the phone boots up. However it will probably bootloop. In this case follow the Hard Reset Procedure below.
Hard Reset Procedure
The phone has to be off. Hold Volume - AND Power , a message will show up confirming the factory reset. Press Power Button twice , than wait. It will auto reboot.
Thanks:
- [email protected] For the realization of the guide
- [email protected] For the big work regarding .KDZ files
- [email protected] Flashing 1 GB and greater .KDZ
Notes
- I have translated this guide because the one I found was little bit tricky unclear and didn't work for me, I hope I have done a good job. I'm anyway available to any modification. Just write below.
- Also I'm Italian so there may be some mistakes in the translation , report back i will correct them with pleasure.
Don't forget to report back if it worked!
reserved 1
Does this ring a bell to you?
http://forum.xda-developers.com/showthread.php?t=2010624
Another question, why place the kdz folder in C:/? I have used kdz updater more than 10 times,it's well placed in D:/Downloads/ folder.It's working everywhere,no need for a special path.
And you didn't mention the 1gb+ file error. kdz updater will not work with bigger files.
What's tricky in potatohead thread?
1.have proper drivers installed,this is universal law for ALL devices. no drivers,not working.
2.download correct kdz file for your phone.
3.download kdz updater
4.enter download mode
5.open kdz updater and choose the file,selecting the right settings.
6.start ,wait to finish and that's it.
If anyone understood something else,it's not the author's fault.
I did all that you point in your guide but during the process, the program went in Not Responding, and after 30s Windows said he closed the program , and now my phone is stuck in Download Mode... Please help me
What windows are you using, also, what machine(laptop/desktop)..
If you are using a desktop,make sure you are using a rear usb port,not front and not through a usb hub,not even an usb extension cable.
if you are using a laptop,be sure you are using usb 2.0,not 3.0.
Rockguy40 said:
5. Now go back in Software Update, select the .KDZ file that you want to flash, and set entries as in the picture. Type "3GQCT" PhoneMode "EMERGENCY".
Click to expand...
Click to collapse
It's not ''Emergency''...phone mode must be ''CS_EMERGENCY'' :good:
Backstaba said:
I did all that you point in your guide but during the process, the program went in Not Responding, and after 30s Windows said he closed the program , and now my phone is stuck in Download Mode... Please help me
Click to expand...
Click to collapse
try using this version, tested windows 7 64 http://www.mediafire.com/download/ekkglj22rh6alho/FlashTool.1.0.54.rar
JasonBourne.Qc said:
It's not ''Emergency''...phone mode must be ''CS_EMERGENCY'' :good:
Click to expand...
Click to collapse
I didn't write the guide as I said , anyway EMERGENCY mode worked for me.
Backstaba said:
I did all that you point in your guide but during the process, the program went in Not Responding, and after 30s Windows said he closed the program , and now my phone is stuck in Download Mode... Please help me
Click to expand...
Click to collapse
As I write in the guide it's normal for the program to go in non respond when decompressing the .kdz but if you don't touch the windows (not a single click) of the updater, windows shouldn't auto kill the program.
it not work
I cant found LG mobile usb modem I am installed driver
Phone was not found from KDZ (
help me..
sorry, my ENG very bad
Rockguy40 said:
If your phone is stuck on the logo LG, do a hard reset .... See below for the procedures.
If the phone starts up as normal, it's recommended to do a hard reset.
Hard Reset Procedure
The phone has to be off. Hold Volume - AND Power , a message will show up confirming the factory reset. Press Power Button twice , than wait. It will auto reboot.
Click to expand...
Click to collapse
My phone get stuck on the logo LG but I can't hard reset ( Hold Volume - AND Power : nothing show on screen ), what do I have to do now?
thank in advance!
Hi,
Interesting post, so this i to unbrick a phone and revert back to original state of the phone (out of the box).
Is this also a possible method to flash any firmware I want. Let me explain, I have my new OG from French Operator SFR with a custom ROM and want to install as a replacement the latest FRA or EUR stock firmware from LG. Can this method be executed safely, OR should I unlock my bootloader and go for a firmware flash through the CWM recovery way instead ?
Thanks for your tip.
bobthedwarf said:
Hi,
Interesting post, so this i to unbrick a phone and revert back to original state of the phone (out of the box).
Is this also a possible method to flash any firmware I want. Let me explain, I have my new OG from French Operator SFR with a custom ROM and want to install as a replacement the latest FRA or EUR stock firmware from LG. Can this method be executed safely, OR should I unlock my bootloader and go for a firmware flash through the CWM recovery way instead ?
Thanks for your tip.
Click to expand...
Click to collapse
Well, i am now root and have unlocked boot loader and installed cwm touch recovery. I feel it was all useless for my purpose being : install à stock firmware instead of my sfr operator ROM.
The right procedure will be through kdz?
CAN i install a lg firmware now from cwm ?
Firmware link update
Please, anyone knows new links to LG E975 original firmware? The link I found for Italy versions are not working anymore. I need unbranded and Vodafone versions. Many thanks.
Lg-firmware.com
Sent from stock LG E975/smart phones,dumb people. now Free
LGE975 firmware
Many thanks for the help but Lg-firmware doesn't work, google suggested lgfirmwares but there is only one type of firmware for LGE975 and the link is broken...
I saw that the link have been only modified in csmgdl lgmobile com but the files are still there.
I just downloaded 10h open romania from that place.
Sent from stock LG E975/smart phones,dumb people. now Free
hi i can't seem to get the KDZX_FW_UPD to open. i've tried running it in admin mode and installing the msxml first but no luck, can someone help?
kimitza said:
I just downloaded 10h open romania from that place.
Sent from stock LG E975/smart phones,dumb people. now Free
Click to expand...
Click to collapse
Does 10h support English...??
Sent from my LG-E975 powering Stock 4.1.2
Yes,it has all the languages...
Warnings:
- If you try to flash in "firmware upgrade" mode, bootloader will be LOCKED again !
- NEVER try to flash in "format all" mode ! Otherwise, you will LOSE all secure and identifying infos for your device. Like IMEI and MAC.
- Keep your backup files safe and secure ! If you can, encrypt them.
- Never try to share your backups or your security and privacy will be compromised.
- USE AT YOUR OWN RISK. I AM NOT RESPONSIBLE FOR YOUR ACTIONS.
Downloads:
- SP Flash Tool (Windows): https://spflashtools.com/category/windows
- SP Flash Tool (Linux): https://spflashtools.com/category/linux
- Download-Agent (DA) file: https://forum.xda-developers.com/t/...omi-redmi-note-9-xiaomi-redmi-10x-4g.4209765/
- Scatter file: https://forum.xda-developers.com/t/...omi-redmi-note-9-xiaomi-redmi-10x-4g.4223097/
- (Optional) ReadBack file: https://forum.xda-developers.com/t/...omi-redmi-note-9-xiaomi-redmi-10x-4g.4223109/
Alternative Downloads:
If you are having problems for flashing on Windows with sp flash tool, give a try on these versions:
- SP Flash Tool v5.2020 https://spflashtools.com/windows/sp-flash-tool-v5-2020
- SP Flash Tool v5.1920 https://spflashtools.com/windows/sp-flash-tool-v5-1920
- SP Flash Tool v5.1916 https://spflashtools.com/windows/sp-flash-tool-v5-1916
1. Extract (or install) SP Flash Tool.
2. Extract Download-Agent (DA) file to the SP Flash Tool home folder.
3. Copy the Scatter file to the SP Flash Tool home folder.
4. If you've downloaded the ReadBack file and want to make backup of your device, copy the ReadBack file to the SP Flash Tool home folder. If not, skip this.
5. Run SP Flash Tool.
6. Select Download tab.
7. Click Choose button for finding the Download-Agent and select the Download-Agent (DA) file.
8. Click Choose button for finding the Scatter-loading and select the Scatter file.
9. Click Options in the menu bar. And then select Option.
10. In General tab, UNCHECK "LIB DA match" and UNCHECK "Storage Lite Cycle".
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Done !
Now you are ready for to flash, to format or to readback whatever you want.
How to properly solve the errors of the SP FLASH TOOL ?
If you are facing any error or any problem using the SPFlashTool, try this guide: https://forum.xda-developers.com/t/...for-merlin-redmi-note-9-redmi-10x-4g.4238161/
Do you need help with your MERLIN device ?
Read this FAQ: https://forum.xda-developers.com/t/...for-merlin-redmi-note-9-redmi-10x-4g.4225163/
whats the difference between sp flash tool and xiaomi flash tool?
dokja28 said:
whats the difference between sp flash tool and xiaomi flash tool?
Click to expand...
Click to collapse
MiFlash uses fastboot writing.
SP Flash Tool uses eMMC writing.
Oh so if i want to flash older miui version for example I'm on global 12.0.6 and i want to flash 12.0.3 global what would i use so that my bootloader cant be lock
dokja28 said:
Oh so if i want to flash older miui version for example I'm on global 12.0.6 and i want to flash 12.0.3 global what would i use so that my bootloader cant be lock
Click to expand...
Click to collapse
Try using sp flash tool.
But if you are on V12.0.5.0 or higher, you need to bypass authorization and flash in EDL mode: https://forum.xda-developers.com/t/...d-flash-in-edl-with-no-auth-for-free.4229683/
dokja28 said:
whats the difference between sp flash tool and xiaomi flash tool?
Click to expand...
Click to collapse
Xiaomi flash tool is an official tool specifically only for Xiaomi devices, it can flash in fastboot mode and download mode both.
Sp flash is an unofficial tool which works for almost every device with Mediatek chipset, and it can flash only in download mode.
help this is what happening after i inserted the device
definitelynotgeddd said:
help this is what happening after i inserted the device
Click to expand...
Click to collapse
You are using wrong DA file.
See "Download-Agent (DA) file" in "Downloads".
@VD171
Probably an unusual question:
I hate android 10/11, they simply abuse of "security" bs and prevents us of doing what we want with our phones.
Is it possible to get rid of dynamic partitions and install some android 9 (Pie) from old days of freedom?
Jazzda said:
@VD171
Probably an unusual question:
I hate android 10/11, they simply abuse of "security" bs and prevents us of doing what we want with our phones.
Is it possible to get rid of dynamic partitions and install some android 9 (Pie) from old days of freedom?
Click to expand...
Click to collapse
Do you mean some rom like GSI ?
I have no ideia, my friend.
But, android 9, 10, 11 and 12 are totally compatible.
So, I think yes, you can.
VD171 said:
Do you mean some rom like GSI ?
I have no ideia, my friend.
But, android 9, 10, 11 and 12 are totally compatible.
So, I think yes, you can.
Click to expand...
Click to collapse
Yes, I mean GSI, but without the super partition, where every partition goes to root (boot, system, vendor, userdata, etc)
Jazzda said:
Yes, I mean GSI, but without the super partition, where every partition goes to root (boot, system, vendor, userdata, etc)
Click to expand...
Click to collapse
Just try and then tell us the result.
help me redmi note 9 hard brick 3 months. can't access fastboot, help me redmi note 9 hard brick 3 months. can't access fastboot, not edl, and can't enter recovery, my redmi note 9 restarted 2x. the last solution was to use sp flash and as a result there was a notification like ininot edl, and couldn't enter recovery, I restarted my redmi note 9 twice. the last solution is to use sp flash and as a result there is a notification like this
Ray Gaming said:
help me redmi note 9 hard brick 3 months. can't access fastboot, help me redmi note 9 hard brick 3 months. can't access fastboot, not edl, and can't enter recovery, my redmi note 9 restarted 2x. the last solution was to use sp flash and as a result there was a notification like ininot edl, and couldn't enter recovery, I restarted my redmi note 9 twice. the last solution is to use sp flash and as a result there is a notification like this
Click to expand...
Click to collapse
Try to flash other MIUI versions in firmware upgrade mode.
Good luck
VD171 said:
thank you for helping me, and my device has come back to life. so long. and I downloaded a lot of firmware and I'm using this firmware QJOMIXM_20200512.0000.00_10.0_global_53a4483cec.tgz. and the bootloader status becomes locked again. I didn't back it up. I'm looking for UBL instances let me know friends
Click to expand...
Click to collapse
Ray Gaming said:
thank you for helping me, and my device has come back to life. so long. and I downloaded a lot of firmware and I'm using this firmware QJOMIXM_20200512.0000.00_10.0_global_53a4483cec.tgz. and the bootloader status becomes locked again. I didn't back it up. I'm looking for UBL instances let me know friends
Click to expand...
Click to collapse
Good work, my friend.
I suggest you to unlock bootloader once you can and then, backup it following my guide:
[GUIDE][UNLOCK] How to restore the state of UNLOCKED BOOTLOADER in MERLIN (Xiaomi Redmi Note 9 / Xiaomi Redmi 10X 4G)
It works with: - Xiaomi Redmi Note 9 - Xiaomi Redmi 10X 4G - Probably some others Xiaomi devices How to backup: Step 1: Unlock your bootloader. Step 2: Backup partition: seccfg You can backup it using the SP FLASH TOOL, TWRP or copy it with...
forum.xda-developers.com
How can restore unlock boot status after backup seccfg?
MA7MOD_GSM said:
How can restore unlock boot status after backup seccfg?
Click to expand...
Click to collapse
Just follow the guide and select the seccfg partition to download only.
VD171 said:
Just follow the guide and select the seccfg partition to download only.
Click to expand...
Click to collapse
so I'm flashing the romglobal v11.0.9 then I flashed the md1img from rom_eng but waht I do is replace the one on the global rom nd the flash it because if I load the entire rom_eng it says that I have to flash erase all but I can't still use maui meta
So can i
VD171 said:
MiFlash uses fastboot writing.
SP Flash Tool uses eMMC writing.
Click to expand...
Click to collapse
So can I use miflash to flash my Merlin and will i need to pass any authorisationnif i want to downgrade from 12.5.5 to 11.0.2?
Hi peeps, my Xiaomi K40 now became a brick because it can't be installed any ROM, I've tried using TWRP and also mi flash tool but nothing helps.
When using TWRP I've tried two methods:
1/ adb sideload
2/ Install from a zip file which is pushed to device using adb push command(because now the device doesn't have any OS)
But in both cases it shown:
Failed to mount '/system_root' (Block device required)
Failed to mount '/system_ext' (Block device required)
Failed to mount '/product' (Block device required)
Failed to mount '/vendor' (Block device required)
Failed to mount '/odm' (Block device required)
Click to expand...
Click to collapse
I've also tried to wipe all data using Advance Wipe option to repair the partition but no hope.
Any one has solution for this case? thanks in advance!
Flash your device in EDL mode.
Please refer to the post below on how to bypass edl mode authentication.
[GUIDE] How to bypass authentication and flash in EDL with NO auth for FREE!
Thanks to VD171 for his post.
I think your device is having a Snapdragon Chipset. Sorry but you may try to search on google for contact to person who has authorised edl account to flash a Snapdragon based phone.
Learn more about it in this video
reborn2020 said:
Hi peeps, my Xiaomi K40 now became a brick because it can't be installed any ROM, I've tried using TWRP and also mi flash tool but nothing helps.
When using TWRP I've tried two methods:
1/ adb sideload
2/ Install from a zip file which is pushed to device using adb push command(because now the device doesn't have any OS)
But in both cases it shown:
I've also tried to wipe all data using Advance Wipe option to repair the partition but no hope.
Any one has solution for this case? thanks in advance!
Click to expand...
Click to collapse
do you still have your fastboot mode on your phone?
mvikrant97 said:
Learn more about it in this video
Click to expand...
Click to collapse
Mi flash didn't recognized my phone.
khazzey said:
do you still have your fastboot mode on your phone?
Click to expand...
Click to collapse
Yes I do.
no bypass for STUCKDRAGON devices for EDL Mode so sad the phone became literally bricked
reborn2020 said:
Mi flash didn't recognized my phone.
Yes I do.
Click to expand...
Click to collapse
listen to me, first if you are on windows 10 you should disable driver signature enforcement on your pc search it on google after disabling you should restart your pc, next step is to install xiaomi flash tool latest (02262021) version after installing the software open it, at the right upper of the software you will see drivers click it and click install after installing, reboot your phone into fastboot mode using volume down and power button, connect your phone to pc and click refresh on xiaomi flash tool if you're phone is detected please come back here let me know
khazzey said:
listen to me, first if you are on windows 10 you should disable driver signature enforcement on your pc search it on google after disabling you should restart your pc, next step is to install xiaomi flash tool latest (02262021) version after installing the software open it, at the right upper of the software you will see drivers click it and click install after installing, reboot your phone into fastboot mode using volume down and power button, connect your phone to pc and click refresh on xiaomi flash tool if you're phone is detected please come back here let me know
Click to expand...
Click to collapse
I did this before but no hope, I don't know if the problem is I'm using a macbook and run windows 10 via bootcamp, I don't have an actual windows computer.
P.S, I upload the latest status.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
last week I was in a similar situation like yours just twrp and all partition screwed up.
well what saved me was to put dot os 5.2 on a USB c pen drive and then simply installing it from trwp (choosing USB pen as source) after literally 5-10 minutes phones came back to life.
let me know if it works for you.
also if twrp throws any error during installation just ignore them for me after flash completed phone booted just fine
ale82to said:
last week I was in a similar situation like yours just twrp and all partition screwed up.
well what saved me was to put dot os 5.2 on a USB c pen drive and then simply installing it from trwp (choosing USB pen as source) after literally 5-10 minutes phones came back to life.
let me know if it works for you.
also if twrp throws any error during installation just ignore them for me after flash completed phone booted just fine
Click to expand...
Click to collapse
I put a miui rom in a usb type c then connect into my phone, then boot into TWRP, and in Install option, I didn't see any option likes "USB pen"
reborn2020 said:
I put a miui rom in a usb type c then connect into my phone, then boot into TWRP, and in Install option, I didn't see any option likes "USB pen"
Click to expand...
Click to collapse
I said USB pen to make sure you choose it from TWRP install I think the righ name is external storage or something similar anyway it seems you are doing things the right way I am quite sure u ll bring phone back to life.
I think muiu room is just fine, should it fails try crDroid or dot os (do not try arrow or lineage)
Bruh I have a very simple solution I guess it might help you
Well first update to latest official twrp custom recovey for your device then
Navigate to Wipe
advance Wipe
Select data and choose Repair or Change File System
Press Repair File System to see if this fixes the issue. If not, continue.
Press Change File System, choose Ext2, and swipe to confirm.
now switch back to Ext4 and swipe to confirm.
i hope this might help you BTW then flash your first custom rom using a sd card or usb if succeeded then flash every stuff as usual
Anurag3100 said:
Bruh I have a very simple solution I guess it might help you
Well first update to latest official twrp custom recovey for your device then
Navigate to Wipe
advance Wipe
Select data and choose Repair or Change File System
Press Repair File System to see if this fixes the issue. If not, continue.
Press Change File System, choose Ext2, and swipe to confirm.
now switch back to Ext4 and swipe to confirm.
i hope this might help you BTW then flash your first custom rom using a sd card or usb if succeeded then flash every stuff as usual
Click to expand...
Click to collapse
Thanks, I've tried this before, unfortunately still can't solve my problem. Finally I decided to bring my phone to a technician.
Try fastboot erase userdata in cmd after taking your device to fastboot mode
Kinda check different twrp I think your twrp is having any problems plz flash your twrp once again
I hope this will surely work for you my friend.
reborn2020 said:
Thanks, I've tried this before, unfortunately still can't solve my problem. Finally I decided to bring my phone to a ttechnic
Click to expand...
Click to collapse
Bro try different formats then change to Ext4 well try this twrp https://dl.twrp.me/alioth/twrp-3.6.0_11-0-alioth.img.html umm i hope this will help you out completely.
if you still have your fastboot mode (turn off then hold power + vol. down), you should check your pc driver if adb and fastboot driver installed properly, then try flashing stock rom (dont relock your bootloader), I think what cause the brick is encrypted storage that get accessed by twrp, even if you decrypt it using password, you can still brick the phone by manually mount some partition in twrp
Thank you all of your help, peeps. Finally I solved my problem by the help of a technician. Because only technician has access to Xiaomi internal tools, these are "Hardware-Level" which could help in these cases.
He
reborn2020 said:
Thank you all of your help, peeps. Finally I solved my problem by the help of a technician. Because only technician has access to Xiaomi internal tools, these are "Hardware-Level" which could help in these cases.
Click to expand...
Click to collapse
Hello, glad you solved your issue, but can you please explain briefly how hardware was bricked since you were already able to reach fastboot & twrp? Since it's known that when you can boot to fastboot, it's a softbrick
Alipk52 said:
He
Hello, glad you solved your issue, but can you please explain briefly how hardware was bricked since you were already able to reach fastboot & twrp? Since it's known that when you can boot to fastboot, it's a softbrick
Click to expand...
Click to collapse
I can boot to fastboot but I can't do anything with fastboot becuase I wiped out anything on my phone include "firmware" maybe, I don't know, sorry but this's not my major so I can't explain.
Hey Guys,
Many users downgraded their ColorOs12 to ColorOs11.3 on oppo reno6 5G device due to many bugs on it, they want to install ColorOs12 but they are not getting OTA update, they are wandering how can they install ColorOs 12 back on their phone, So, here I have come up with a method to directly flash ColorOS12.
Note: Data will(or might) be erased in this method so please take backup of you data on phone.
This has been tested on Indian version, I am not sure if it will work for other countries.
I strongly recommend to take full firmware backup using method below before proceeding
Backup full firmware(ROM) of any MediaTek device using MTK client| Oppo reno6 5G | MT6877
Hello Guys, Many times we encounter a situation where we need to do some software update, flash custom ROM, install stock ROM etc, so it is advisable to take full firmware/ROM backup of your device. If required then you can flash this backup to...
forum.xda-developers.com
Step1: Pre-requisite -Installing required drivers and setup
From link below download drivers and setup.
Install mediatek driver.
Install python (during installation of python please select "install for all user" from customization and tick add path to system variable)
install usbdk.
download extarct Mtk client tool.
go to folder where you extract mtk client
View attachment 5541629
open cmd here and run below command
cd mtkclient
pip3 install -r requirements.txt
In default setting it takes 2 hour to flash but after change it takes 13 min. If you want to increase flashing speed then open mtk_daxflash.py file from library folder, search "dsize = min(length, 0x200)" and replace it with "dsize = min(length, 0x2004)" , save and close the file.
You need to close command prompt in order to take effect of change.
Reference(https://github.com/bkerler/mtkclient/issues/271)
New Qcom Mtk Driver V3.0.5.1.rar | by TUSER HP for Generic Device/Other
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com
Download Python
The official home of the Python Programming Language
www.python.org
GitHub - bkerler/mtkclient: MTK reverse engineering and flash tool
MTK reverse engineering and flash tool. Contribute to bkerler/mtkclient development by creating an account on GitHub.
github.com
Releases · daynix/UsbDk
Usb Drivers Development Kit for Windows. Contribute to daynix/UsbDk development by creating an account on GitHub.
github.com
Step2: Download and extract the ColorOs 12 firmware
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CPH2251_11_C.27_ColorOS12_Android12_Latest.rar
drive.google.com
Step3: Flash the firmware
on cmd type below command to flash the firmware
python mtk wl "ROM location full path"
it will wait for devices.. Power off the phone, wait 10 sec then press vol up + vol down together and then plug the usb cable.
Once device detected , it will display devices information and start flashing
View attachment 5541639
View attachment 5541641
View attachment 5541645
While flashing it will dump the preloader, this file is very important so, please keep this file safely. this file may require in future.
View attachment 5541661
Step4: Boot the phone
Once flashing completed, press vol up + power button together for 30 sec. Wait for device to boot.
Step5: Flashing the preloader.bin (only if required)
In case, even after flashing completed successfully but some time device does not boot, only black screen, no charging sign either then don't panic, device has entered into emergency download mode, if you face the same then it's time to flash preloader.bin file. Follow below steps
1) download SP flash tool specific version v5.2148. (https://androidmtk.com/smart-phone-flash-tool)
2) download attached preloader.bin, scatter file and auth file from link below and place all these files at same folder.
MT6877_flashing_preloader.zip
drive.google.com
3) open sp flash tool, select download agent files from mtk folder as shown on image and load scater file and auth files respectively.
View attachment 5581171
4) In cmd run command "python mtk payload". Now press and hold vol+ vol- or all the buttons together, it should show payload sent successfully.
5) Now in sp flash tool click on Download button, it should flash the preloader successfully.
6) once preloader is flash successfully you can turn on the phone by pressing vol+ and power button together for 20 sec. If attached preloader does't flash then you can try flashing your device backup preloader.bin created/shown on step3.
so by this way we directly flashed ColorOS 12 on oppo reno6 5G.
Tips: If due to some reason flashing did not completed successfully then please press vol up and power button together for 30-40 sec to boot the phone (exit the brom mode).
Disclaimer: I have tested this method on my phone, it's 100% working but I will not responsible if damage any damage happens to your device while doing this. So do it at your own risk.
thanx nand for helping me in upgrading to coloros 12 again,this process worked successfully.
Thanks for the info.
My question is: can I use this method to remove phone branding using stock firmware image you pointed in your post?
macslui said:
Thanks for the info.
My question is: can I use this method to remove phone branding using stock firmware image you pointed in your post?
Click to expand...
Click to collapse
Hi, i didn't understand your question. Can you explain more.
Nand kumar said:
Hi, i didn't understand your question. Can you explain more.
Click to expand...
Click to collapse
Sorry. Try to better explain: I have a Vodafone branded reno 6 that accept any sim card. I only want to remove Vodafone branding (boot logo and custom app that are present only in branded phone).
Yes, you can try. I recommend you to take full firmware backup before doing this as explained in guide.
bonjour a tous quand j'écrit pip3 install -r requirements.txt j'ai une erreur :
ERROR: could not open requirements file :[Errno2] no such file or directory: requirements.txt
merci de m'aider
Please run this command from mtk folder
Nand kumar said:
Yes, you can try. I recommend you to take full firmware backup before doing this as explained in guide.
Click to expand...
Click to collapse
Hi Nand, I've done everything as you pointedout in this document and backup document.
Unfortunately I was able to flash the phone with success but now it do not turn it on anymore.
I've tried to every button combination but it remain off.
I also cannot enter brom mode anymore.
Have you some suggestion?
Thanks!
macslui said:
Hi Nand, I've done everything as you pointedout in this document and backup document.
Unfortunately I was able to flash the phone with success but now it do not turn it on anymore.
I've tried to every button combination but it remain off.
I also cannot enter brom mode anymore.
Have you some suggestion?
Thanks!
Click to expand...
Click to collapse
I was able to reenter brom mode. Now I'm reflashing again.
Hi all, everything ok now. I've flashed COS12 and now my phone is non more brand (vodafone) related.
Nand kumar said:
Please run this command from mtk folder
Click to expand...
Click to collapse
ok merci je ne savais pas comment ouvrir cmd a partir d'un fichier fonctionne très bien merci
macslui said:
Hi all, everything ok now. I've flashed COS12 and now my phone is non more brand (vodafone) related.
Click to expand...
Click to collapse
macslui said:
Glade to hear that you removed brand using thus method.
Click to expand...
Click to collapse
Unfortunatly COS12 in my opinion Is very laggy. I'm trying tio rollback to COS11 but, after flashing using your guide, the phone do not boot anymore. So I have to go back to 12. It's only my experience on COS12?
Hi, for many peoples, Color os12 was not laggy but have some bugs like battery draining etc.
For your device is not booting on color 11 then you have to flash preloader using Sp flash tool version v5.2148
Thanks Nand, allways ready to answer, thanks! Can please explain how to flash preloader with SP flash tool please? I have preloader from backup. Thanks again for your support.
Removed ...
macslui said:
Thanks Nand, allways ready to answer, thanks! Can please explain how to flash preloader with SP flash tool please? I have preloader from backup. Thanks again for your support.
Click to expand...
Click to collapse
Removed my contact details as I was getting to many message/calls on phone.
macslui said:
Hi Nand, I've done everything as you pointedout in this document and backup document.
Unfortunately I was able to flash the phone with success but now it do not turn it on anymore.
I've tried to every button combination but it remain off.
I also cannot enter brom mode anymore.
Have you some suggestion?
Thanks!
Click to expand...
Click to collapse
Same happen with me.. My phone is not bootibg up , no logo, no charging logo, not even single sign for alive please help me out help help
Cosmicsh said:
Same happen with me.. My phone is not bootibg up , no logo, no charging logo, not even single sign for alive please help me out help help
Click to expand...
Click to collapse
Removed my contact details as I was getting to many message/calls on phone.
Hello everyone !
I am French and my English is very bad so I will use Google translation to communicate with you!
This is what is happening.
Without doing it on purpose, I flashed the original boot with the unofficial TWRP one!
Since then, I can no longer use my phone and I no longer enter the RUI3 interface.
I used Realmeflash.exe to reinstall the firmware and it gives me an error message "cannot find central directory".
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Do you know how to solve this problem?
Thank you for your help !
I had the same problem you gotta get the MCT OFP extractor tool and QFIL, you extract everything with the MCT tool and then use QFIL to flash but the super.img is broken up into multiple files which I Have no clue how to merge so I'm stuck for now but if I get it working I'll be sure to tell you
kamubendi said:
I had the same problem you gotta get the MCT OFP extractor tool and QFIL, you extract everything with the MCT tool and then use QFIL to flash but the super.img is broken up into multiple files which I Have no clue how to merge so I'm stuck for now but if I get it working I'll be sure to tell you
Click to expand...
Click to collapse
Thank you very much friend
@kamubendi
I posted the problem on this page too !
https://c.realme.com/in/post-details/1525231625514856448
If it can help for the future
I share the extraction of the firmware : RMX3363GDPR_12_C.06_2022042721590000
https://drive.google.com/drive/folders/1QpeyOBuavwC3gq25jfKnNaXqmVBMAwt-?usp=sharing
use this flash tool. put the ofp file in same folder run exe & select region start flash https://github.com/italorecife/OppoRealme-OFP-Flash
urstrulynaveen said:
use this flash tool. put the ofp file in same folder run exe & select region start flash https://github.com/italorecife/OppoRealme-OFP-Flash
Click to expand...
Click to collapse
I already tried !
According to Google the .exe is infected with a virus, but I used it anyway, because I know it can be a false positive.
During use, the flash does a lot of "Success" but also "Failed", because of data protection on certain files!
Arrived at "service.img", the flash stops and nothing advances!
I recently unbricked my GT ME using this flash tool only. Realme flash tool doesn't support AB partition & dynamic partition table. It is the only working tool to flash through fastboot. After flashing completion change slot
fastboot getvar current-slot
fastboot --set-active=a or b
fastboot reboot
urstrulynaveen said:
I recently unbricked my GT ME using this flash tool only. Realme flash tool doesn't support AB partition & dynamic partition table. It is the only working tool to flash through fastboot. After flashing completion change slot
fastboot getvar current-slot
fastboot --set-active=a or b
fastboot reboot
Click to expand...
Click to collapse
I choose slot A to do the flashing and then I have to activate slot B ?
Yup after flashing success
urstrulynaveen said:
Yup after flashing success
Click to expand...
Click to collapse
Hi, I got my phone back from this scam repairman!
He damaged my phone even more than I left him!
Could you send me a screenshot of your c:\adb\dir please!
I no longer have recovery mode and the repairman told me a lot of things that I supposedly did during the flashing to get rid of his bull****!!
Thank you.
@urstrulynaveen Otherwise I tried what you told me and I got this!
ToutanVrac said:
@urstrulynaveen Otherwise I tried what you told me and I got this!
View attachment 5618219
Click to expand...
Click to collapse
Ur already in slot a change it to b. Firmware may flashed in slot b
urstrulynaveen said:
Ur already in slot a change it to b. Firmware may flashed in slot b
Click to expand...
Click to collapse
I already did, I have this command line that appears instead !
When I launch the program for slot A, it's very random when it blocks !
On the image, it's xb1_config_a which bug !
And when I close the window, it gives me success before it disappears !
In general, I have 50% success and 50% failed !
The furthest file that gave me the bug is the "super" file !
Apparently it is cut into 5 parts with the OFP extractor.
ToutanVrac said:
I already did, I have this command line that appears instead !
View attachment 5618873
When I launch the program for slot A, it's very random when it blocks !
On the image, it's xb1_config_a which bug !
And when I close the window, it gives me success before it disappears !
View attachment 5618879
In general, I have 50% success and 50% failed !
The furthest file that gave me the bug is the "super" file !
Apparently it is cut into 5 parts with the OFP extractor.
Click to expand...
Click to collapse
Every partition flashes in both slots except super partition. Super partition only flashes in inactive slot, that's why u need to change the slot. Super partition flashing takes around 25 to 30 minutes you need to be patient. & After flashing check slot and change it
urstrulynaveen
Thank you very much for helping me, it motivates me not to give up !
Did you receive a lot of failed during flashing ?
@urstrulynaveen
Problem solved...everything works! !
I'm in the interface and everything seems fine at the moment.
The flashing problem was what you said for the "super" file, but the main problem was above all the fact that I wasn't using a USB port on the motherboard !
Were you able to root the phone ?
ToutanVrac said:
@urstrulynaveen
Problem solved...everything works! !
I'm in the interface and everything seems fine at the moment.
The flashing problem was what you said for the "super" file, but the main problem was above all the fact that I wasn't using a USB port on the motherboard !
Were you able to root the phone ?
Click to expand...
Click to collapse
Can you explain to me how to do it with pictures and writing and I will be very thankful to you
nighetspy said:
Can you explain to me how to do it with pictures and writing and I will be very thankful to you
Click to expand...
Click to collapse
It's very easy !
1. You download the latest firmware
2. You put your phone in fastboot mode
3. You connect your phone with the original cable to an available port on your motherboard
4. You open the "OppoRealme-OFP-Flash_1.0.exe"
5. You choose the "most logical" options
The files will install one by one and you may get a lot of errors!
Leave it, the program will continue and at some point there will be a "super" file which will take a long time to install (30 minutes), you wait and then you will see your phone restart as if it were brand new !
ToutanVrac said:
It's very easy !
1. You download the latest firmware
2. You put your phone in fastboot mode
3. You connect your phone with the original cable to an available port on your motherboard
4. You open the "OppoRealme-OFP-Flash_1.0.exe"
5. You choose the "most logical" options
The files will install one by one and you may get a lot of errors!
Leave it, the program will continue and at some point there will be a "super" file which will take a long time to install (30 minutes), you wait and then you will see your phone restart as if it were brand new !
Click to expand...
Click to collapse
Finally, after two weeks of trouble, the problem was solved, thank you very much