Develop Bugs

[BSL7] Galaxy Note10+ (SM-N975F) OFFICIAL OneUI2/10 beta (NO ROOT/CUSTOM ROM TALK!!!)

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This thread is for the INTERNATIONAL Note10+, SM-N975F, only!!!
Continuously "asking" "where's the UPDATE.ZIP" is NOT DONE!
Be aware, it's NOT very easy to pull the UPDATE.ZIP, and is done by persons in their free time! ( i.e. Cyber John )
If you "can't wait" for the UPDATE.ZIP, pull it yourself and post it here!
Samsung is starting a Beta-program Android 10/OneUI 2 for the Note10-series. In this thread, we'll post the UPDATE.ZIP files (when available).
REMEMBER: don't install these files if you want to have a STABLE phone! As this is a BETA, it's possible the firmware isn't BUG-free!
The UPDATE.ZIP files are pulled from a GERMAN (DBT)-device; be sure your device is on the N975FXXU1ASJ2 build! (Radio/CP & CSC must be on: ASIC (Radio/CP) & ASJ2 (CSC))
The UPDATE.ZIP can be installed on devices with the following CSC's:
SM-N975F OXM multi-CSC:
ACR AFG AFR ARO ATO AUT BGL BNG BTC BTU CAC CAM CAU CHO COO CPW DBT DKR DOO ECT EGY EON EUR FWD GLB GTO ILO INS ITV KSA LAO LUX LYS MID MM1 MWD MXO MYM NEE NPL NZC OPS ORX PAK PEO PHE PHN ROM SEB SEE SEK SER SIN SIO SKZ SLK SMA SMP STH TEL THL TNZ TPA TPH TTT TUN TUR VAU VNZ XEF XEH XEO XEU XEZ XFA XFE XFV XME XFG XNZ XSA XSP XTC XXV
How to install the UPDATE.ZIP to your Note10+ (by @madvinegar ); YouTube-video by SStech
ADB-method:
1. Download SDK platform tools from here https://developer.android.com/studio/releases/platform-tools
2. Extract them on your desktop.
3. Inside the extracted folder put the update.zip
4. Inside this folder, holding left shift, right click the mouse and select "open command prompt here". The command prompt will open.
5. Shutdown the phone.
6. Holding power+bixby+volume up buttons, enter into recovery mode.
7. Select "update via ADB". (you scroll down using the volume buttons and select using the power button).
8. Connect the phone to the PC using original samsung USB cable.
9. In the command prompt run the following command:
./adb devices
10. Wait to see that the daemon has started and that your device is found.
11. If you device is found, run the following command:
./adb sideload update.zip
The update process will start. You will see a percentage counting. First it will verify, then patch etc. Do not move the cable, disconnect the phone or power off the PC.
Once the process is completed (it takes some time) the phone will boot itself, update the apps and log into your home screen.
SD-card method:
1. Download the bin file and rename it to update.zip (by going to file options in win10 you can select to view the file extensions. This makes the renaming process much easier and safer, and avoids renaming the file to update.zip.zip)
2. Copy it to the root directory of your SDcard.
3. Shut down your phone.
4. Hold simultaneously Power+bixby+volume up buttons to get into stock recovery.
5. Using your volume keys navigate to "update via SdCard" and press power button to select it.
6. Again using volume keys navigate to the file "update.zip" and press power button to select it.
7. Update will start. Leave it till it completes. It will take some time.
8. Phone will reboot by itself and load android.
This will not trip KNOX if done by the method i told
NOTE: THESE UPDATE.ZIP's ARE ONLY FOR DEVICES WITH MULTI-CSC OXM!!!
You can check this, to type in your dialer *#1234#, and check if OXM is in the CSC-build...
Note10+:
Beta1 (28 Oct) ASJ2 -> ZSJF : N975F_ASJ2_ZSJF
You need to be at this build: AP : N975FXXS1ASJ2 - CP : N975FXXS1ASIC - CSC : N975FOXM1ASJ2
Beta1 (08 Nov) ASJG -> ZSK4 : N975F_ASJG_ZSK4 (thanks to @dr.ketan)
You need to be at this build: AP : N975FXXS1ASJG - CP : N975FXXS1ASJ2 - CSC : N975FOXM1ASJ2
Beta1 (14 Nov) ASJM -> ZSK4 : N975F_ASJM_ZSK4 (thanks to SamMobile)
You need to be at this build: AP : N975FXXS1ASJM - CP : N975FXXS1ASJ4 - CSC : N975FOXM1ASJC
Beta2 (18 Nov) ZSK4 -> ZSK8 : N975F_ZSK4_ZSK8 (thanks to @dr.ketan)
Beta2 (18 Nov) ZSJF -> ZSK8 : N975F_ZSJF_ZSK8 INSTALL VIA SD-CARD METHOD!
Beta3 (29 Nov) ZSK8 -> ZSKN : N975F_ZSK8_ZSKN (Thanks to GalaxyClub)
Beta4 (06 Dec) ZSKN -> ZSL4 : N975F_ZSKN_ZSL4 (Thanks to GalaxyClub)
Beta5 (11 Dec) ZSL4 -> ZSL7 : N975F_ZSL4_ZSL7 (Thanks to SamMobile)
Stable (13 Dec) ZSL7 -> BSL7 : N975F_ZSL7_BSL7 (Thanks to Cyber John )
Note10:
Beta1 (28 Oct) ASJ2 -> ZSJF : N970F_ASJ2_ZSJF
Beta2 (18 Nov) ZSJF -> ZSK8 : N970F_ZSJF_ZSK8 INSTALL VIA SD-CARD METHOD!
Beta3 (29 Nov) ZSK8 -> ZSKN : N970F_ZSJ8_ZSKN (Thanks to SamMobile)
Beta4 (06 Dec) ZSKN -> ZSL4 : N970F_ZSKN_ZSL4 (Thanks to SamMobile)
Beta5 (11 Dec) ZSL4 -> ZSL7 : N970F_ZSL4_ZSL7 (Thanks to Cyber John )
Stable (13 Dec) ZSL7 -> BSL7 : N970F_ZSL7_BSL7 (Thanks to Cyber John )
RENAME THE FILE TO update.zip
NOTE: after installing the update, CLEAR your cache by going into recovery (VolUP - Power)
If you want to run the BETA-firmware flawlessly, do a FACTORY-reset afterwards... (not necessary, but... )
UPDATING to Beta is your own choice, and I don't take responsibility if something is going wrong!
If you're NOT officially registered, you WON'T receive OTA: you'll have to update everytime MANUALLY with above method!!!
If you want to DOWNGRADE back to Pie: download the latest Pie-firmware for your own CSC, flash AP BL CP & CSC_OXM -> your device will reset afterwards which is mandatory!

In previous BETA releases being able to connect devices such as your watch has been very hit and miss.
There was a thread somewhere about Android 10 and it not connecting to the Active 2 watch. Just something to keep in mind if you are considering updating to the BETA and have such devices

Note 10 android beta delayed until 24.10, maybe.
"SAMSUNG LIVE CHAT <SAMSUNG LIVE CHAT
MICHAELA YORKS / CHATE ID: 22459678 MICHAELA YORKS / CHATE ID: 22459678
have lost.
14:23
Welcome! small
Wait a minute, it's about to go Los_13: 21 For the Note10 / Note10 + will be the
Beta program expected from
Good day Marcel Racky. My name the 24.10. be empowered. 14:23
1st Michaela Yorks. I like to help
welter! 14:21 Um, let's just say it
on 21.10
14'24, 7
So hello again, here I am
was just kicked c looks like
that now off with the rest of the information When does the rollout start?
to the beta program for note 10 at German time?
and the 10 plus comes the 14:24
tomorrow? if so when does it start?
rollout ?? Because I suspect that belongs to the more up-to-date information
the start is delayed as it stands at 24.10.
the s10 series 14:24
14:22
For this we are not current
It's us Marcel. Unfortunately, information had before ..
we have a connection error, 14:24
We also turn our customers
have lost. Okay, good to know that's too bad
14:23 again delayed"

megatooth said:
Note 10 android beta delayed until 24.10, maybe.
"SAMSUNG LIVE CHAT <SAMSUNG LIVE CHAT
MICHAELA YORKS / CHATE ID: 22459678 MICHAELA YORKS / CHATE ID: 22459678
have lost.
14:23
Welcome! small
Wait a minute, it's about to go Los_13: 21 For the Note10 / Note10 + will be the
Beta program expected from
Good day Marcel Racky. My name the 24.10. be empowered. 14:23
1st Michaela Yorks. I like to help
welter! 14:21 Um, let's just say it
on 21.10
14'24, 7
So hello again, here I am
was just kicked c looks like
that now off with the rest of the information When does the rollout start?
to the beta program for note 10 at German time?
and the 10 plus comes the 14:24
tomorrow? if so when does it start?
rollout ?? Because I suspect that belongs to the more up-to-date information
the start is delayed as it stands at 24.10.
the s10 series 14:24
14:22
For this we are not current
It's us Marcel. Unfortunately, information had before ..
we have a connection error, 14:24
We also turn our customers
have lost. Okay, good to know that's too bad
14:23 again delayed"
Click to expand...
Click to collapse
Yes: was mentioned in my 1st post (1st line)

Wonder if it's to do with the whole fingerprint with screen protector issue that's going on at the minute. Maybe they want to get that in the beta and that's why it's delayed.

Wouldn't flashing the update.zip file directly via the recovery menu work? nor not trip knox? When pie beta was released last year for the note9, flashing the update file directly worked. I remember I was at the airport that time and just couldn't wait to get home to flash it so I did everything there with only a charging port available around.
Sent from my SM-N975F using Tapatalk

annson08 said:
Wouldn't flashing the update.zip file directly via the recovery menu work? nor not trip knox? When pie beta was released last year for the note9, flashing the update file directly worked. I remember I was at the airport that time and just couldn't wait to get home to flash it so I did everything there with only a charging port available around.
Sent from my SM-N975F using Tapatalk
Click to expand...
Click to collapse
We had to flush update.zip via adb on s10 last week.
Anyway, old news, my new n10 is coming Thursday on potential beta day too lol

henklbr said:
6. Holding power+volume up buttons, enter into recovery mode.
Click to expand...
Click to collapse
Note 10 Plus has no Power Button, Probably the Bixby button is meant?

6. Odin v3.13.3 must be on ,connect cable (original) to your phone then holding VOLUME DOWN + VOLUME UP than connect cable in PC USB = enter into recovery mode.

woodchild said:
Note 10 Plus has no Power Button, Probably the Bixby button is meant?
Click to expand...
Click to collapse
How do you Power-ON your Note10 when it's OFF?

megatooth said:
6. Odin v3.13.3 must be on ,connect cable (original) to your phone then holding VOLUME DOWN + VOLUME UP than connect cable in PC USB = enter into recovery mode.
Click to expand...
Click to collapse
You're saying? ? ?
You DON'T go to "recovery mode" when you're doing this (you'll enter in ODIN-mode!)

More specific: odin on, phone off, attach cable to phone, push VOLUME UP + VOLUME DOWN same time, attach cable to usb pc . Voilà!

megatooth said:
More specific: odin on, phone off, attach cable to phone, push VOLUME UP + VOLUME DOWN same time, attach cable to usb pc . Voilà!
Click to expand...
Click to collapse
"My" method is much easier, don't you agree?

henklbr said:
How do you Power-ON your Note10 when it's OFF?
Click to expand...
Click to collapse
Yes, that´s right No Power off Button but Bixby Button is Power On button if device off My Mistake

henklbr said:
"My" method is much easier, don't you agree?
Click to expand...
Click to collapse
Yes. It is. Because "my method" is for flash with odin
Another mistake

megatooth said:
Yes. It is. Because "my method" is for flash with odin
Another mistake
Click to expand...
Click to collapse
"My" method can also be used to flash with Odin:
Choose: Boot to Bootloader
And "what" do you mean with "Another mistake"?

henklbr said:
And "what" do you mean with "Another mistake"?
Click to expand...
Click to collapse
I think he means that in relation to my post # 14. I wrote "My mistake"

henklbr said:
And "what" do you mean with "Another mistake"?
Click to expand...
Click to collapse
My mistake !

NOTICE
When, I say WHEN, the BETA is released today, keep following in mind:
Continuously "asking" "where's the UPDATE.ZIP" is NOT DONE!
Be aware, it's NOT very easy to pull the UPDATE.ZIP, and is done by persons in their free time! ( i.e. Cyber John )
Read message #1: all instructions are there!
Not complying with above results in reporting to the Mod's!
Keep this thread CLEAN!!!

three uk devices are sold unlocked apparently, does this mean i dont need to play around with the csc to get the beta to bite??

Discontinued! [ROM][OneUI 2.5 BTIB][Sep 28][Stock Heavily Debloated][G980F/G985F][Flash with Odin]

Please read the following instructions carefully .
Download Link(only latest):
G980F Version 1.2.0 https://drive.google.com/file/d/1w-5cKNsord7KwvfOAD8hTvxhAS__6mmo/view?usp=sharing
G985F Version 1.1.0 https://drive.google.com/file/d/1kEOkf5Yfs3DGDYjSwph-mINwmOtZ2JUR/view
G981B Planed
G986B Planed
G988B Planed Should be next since I got tons of request.
This custom firmware is based on stock S20(+) G980(5)FXXU4BTH5 . Please make sure you are using G980F/G985F. The G980F is a unblocked 4G version S20, the G985F is a unblocked 4G version S20+.
Depending on the feedbacks and requirements, I might make for other variants in the future. But now, G980F/G985F are the only supported devices.
Disclaimer:
1.This firmware has been tested on G980F real device properly, however, you choose to use at your own risk.
2.Feedbacks are generally welcomed, but please use "search thread" function before ask how to fix xxx problem.
Features:
1.Patched boot.img with Magisk. thanks (https://github.com/topjohnwu/magisk_files/tree/canary)
2.Debloat system.img/product.img, full list below.
3.Deknox system.img/product.img, full list below.
4.Debloat prism.img, full list below.
5.Debloat userdata.img, full list below.
6.Build.prop tweaks in system.img.
7.Replace Samsung default apps(Contacts, Calender, Clock, Calculator, Messages, Dialer, Recorder) to Google apps in system.img.
8.Clear Bootlogo, thanks (https://forum.xda-developers.com/galaxy-s20/development/s20-5g-clean-bootlogo-unlocking-t4067177)
9.Mod optics.img to unlock the advanced features, thanks (https://forum.xda-developers.com/ga...agisk-module-decodedcscfeaturesfiles-t4082445)
10.Mod vbmeta.img to disable Android Verified Boot(proved in screenshot below), thanks (https://forum.xda-developers.com/galaxy-s20/how-to/howto-root-s20-series-upgrade-firmware-t4079353)
11.Disable first boot initial setup wizard, your first boot will enter the system straight away.
12.Debloat media/audio(alarms, notification, ringtones), replace with theme audio from Samsung/Google Pixel/Sony.
13.Youtube No Ad version included. Please disable auto update from Google Play, if you accidentally update youtube, you can always uninstall update from google play, thanks (https://forum.xda-developers.com/android/apps-games/app-youtube-vanced-edition-t3758757)
14.All apps up-to-date(28/9/2020) in this rom.
How to flash?
0. Back up all your data.
1. OEM unlock follow (https://forum.xda-developers.com/galaxy-s20/how-to/howto-root-s20-series-upgrade-firmware-t4079353)
2. Download the zip file flash with Odin.
3. Choose BL, AP and CP. Please note there is no CSC.tar in this zip, since CSC files are included in AP.
4. After flashing, make sure wipe data/factory reset in recovery. (Volume up + power button when boot up)
5. Enjoy!
Changelog:
1.2.0
1.Support G980F
2.Based on BTIB OneUI 2.5 Sep Patch, (1.Improved performance. - Camera 2.The security of your device has been improved.) (https://doc.samsungmobile.com/SM-G980F/DBT/doc.html)
3.Fix Samsung Health compatibility, you can install from Google Play or Samsung store.
4.Replace Samsung Dialer with Google Dialer, now we are Samsung app free except the Samsung Gallery app, since stock camera app can only open gallery.
5.Fix some bugs here and there.
1.1.0
1.Support G980F/G985F.
2.Based on BTH5 OneUI 2.5, all apps update-to-date.
3.Fix some bugs here and there.
4.Debloat list update.
1.0.0
1.Support G980F.
2.All basic features implemented.
FAQ/Known issues:
1.Accessibility -> Visibility enhancements can not be open. This is due to nasty Samsung requires Samsung keyboard's content provider to open this setting. Since Samsung keyboard is considered as bloatware, so you wouldn't be able to open this setting. But in reality, there is nothing need to be set in this setting unless you are colour-blind or having other vision disorder.
2.Please don't mod /system partition. Originally, if you using the official firmware, you can't even edit /system partition. Now you can with edited super.img and root access, but it will cause boot loop. I believe this is a mount issue with logical partition. To save your soft brick phone, the easily way is extract super.img from AP, compress super.img to super.tar, then simply flash super.tar as AP in odin and reboot, no need to wipe data/factory reset.
3.Riru Edxposed is fully compatible, since it is systemless.
4.If you found any app you want to use is in the debloat list, you can try to manually install but please do not ask me how to fix certain apps, such questions won't be answered again and again.
5.Generally speaking, if you found any app does not work but it is not in the debloat list, chances are you forgot wipe data/cache in recovery after flashing this rom.
Screenshots:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Here is a list of bloats been deleted in system.img/product.img.
#Knox
system\app\BBCAgent
system\app\KnoxAttestationAgent
system\app\MDMApp
system\app\SecurityLogAgent
system\app\UniversalMDMClient
system\priv-app\DiagMonAgent
system\priv-app\KLMSAgent
system\priv-app\KnoxCore
system\priv-app\knoxvpnproxyhandler
system\priv-app\knoxanalyticsagent
system\priv-app\KnoxDesktopLauncher
system\priv-app\KnoxKeyChain
system\container
system\etc\permissions\knoxsdk_mdm.xml
system\etc\permissions\knoxsdk_edm.xml
#Skip Setup & Restore
product\priv-app\SetupWizard
product\priv-app\GoogleOneTimeInitializer
product\priv-app\GoogleRestore
#AR
system\app\ARDrawing
system\app\ARZone
system\app\ARCore
system\app\VisionARApps1.1
system\priv-app\AREmoji
system\priv-app\AREmojiEditor
system\priv-app\AvatarEmojiSticker*
system\priv-app\AutoDoodle_Q
system\priv-app\LiveStickers
#Bixby
system\app\*Bixby*
system\app\VisionARApps
system\app\VisionIntelligence*
system\priv-app\Bixby*
system\priv-app\Routines
system\priv-app\*Bixby*
#Wearable
system\app\AntHalService
system\app\ANTPlusPlugins
system\app\ANTPlusTest
system\app\GearManagerStub
system\priv-app\ANTRadioService
#Dex
system\priv-app\DesktopModeUiService
system\priv-app\DeXonPC
system\priv-app\SystemUIDesktop
#Original Youtube
product\app\YouTube
#Samsung Mixed
system\app\ClockPackage
system\app\DailyBoard
system\app\GameOptimizingService
system\app\HoneyBoard
system\app\KidsHome_Installer
system\app\LinkSharing*
system\app\LiveDrawing
system\app\SamsungCalendar
system\app\SamsungDaily
system\app\SamsungPassAutofill*
system\app\SamsungTTS
system\app\SBrowserEdge
system\app\SecFactoryPhoneTest
system\app\SetupWizardLegalProvider
system\app\SmartSwitchAgent
system\app\SmartReminder
system\app\VideoEditorLite_Dream_N
system\app\VideoTrimmer
system\app\Weather_SEP*
system\priv-app\AuthFramework
system\priv-app\GameHome
system\priv-app\GameOptimizingService
system\priv-app\GameTools_Dream
system\priv-app\MateAgent
system\priv-app\PreloadInstaller
system\priv-app\SamsungContacts
system\priv-app\SamsungCloudClient*
system\priv-app\SamsungMessages*
system\priv-app\SamsungPass
system\priv-app\SamsungSocial
system\priv-app\SendHelpMessage
system\priv-app\SmartSwitchAssistant
system\priv-app\SecMyFiles*
system\priv-app\SOAgent
system\priv-app\SPPPushClient
system\priv-app\SVoiceIME
system\priv-app\OneDrive*
system\priv-app\Tips
#Other Mixed
product\app\DuoStub
product\priv-app\AndroidAutoStub
product\priv-app\Turbo
system\app\AutomationTest_FB
system\app\BasicDreams
system\app\BlockchainBasicKit
system\app\CarmodeStub
system\app\DictDiotekForSec
system\app\DRParser
system\app\DuoStub
system\app\EasterEgg
system\app\EasyOneHand3
system\app\ESEServiceAgent
system\app\Facebook_stub
system\app\FBAppManager_NS
system\app\FactoryAirCommandManager
system\app\FactoryCameraFB
system\app\FlipboardBriefing
system\app\HandwritingService
system\app\IceCone
system\app\Netflix_activationCommon
system\app\Netflix_stub
system\app\SafetyInformation
system\app\WebManual
system\app\WifiGuider
system\priv-app\AndroidAutoStub
system\priv-app\ContainerAgent*
system\priv-app\DigitalWellbeing
system\priv-app\EnhancedAttestationAgent
system\priv-app\FBInstaller_NS
system\priv-app\FBServices
system\priv-app\Fmm
system\priv-app\FotaAgent
system\priv-app\HealthService
system\priv-app\LedBackCoverAppHubble
system\priv-app\LedCoverService
system\priv-app\LinkToWindowsService
system\priv-app\ManagedProvisioning
system\priv-app\NSFusedLocation*
system\priv-app\PaymentFramework
system\priv-app\RubinVersion*
system\priv-app\SecureFolder
system\priv-app\Upday
system\priv-app\YourPhone*
system\preload\SmartSwitch
system\etc\recovery-resource.dat
system\recovery-from-boot.p
system\hidden\INTERNAL_SDCARD\Samsung
system\media\audio\ui\Media_preview_Over_the_horizon.ogg
system\tts
Here is a screenshot of bloats in prism.img
Here is a screenshot of bloats in userdata.img

Reserved.

thanks for share。
Sent from my HTC U11+ using XDA Labs

hi mate
can i use this on S20 ULTRA?

patuticci said:
hi mate
can i use this on S20 ULTRA?
Click to expand...
Click to collapse
no

hmy65 said:
@MikeChannon
Can you move this post to Samsung Galaxy S20 / S20+ / S20 Ultra Samsung Galaxy [EXYNOS] S20 / S20+ / S20 Ultra ROMs, Kernels, Recoveries, & Other Development?
I can't post at that area. But I think only I made the public available S20 custom rom right now.
Click to expand...
Click to collapse
hi man,
can you do the same for S20Ultra G988B?
or if you can share what you used to do maybe someone could do it for S20Ultra G988B.
thanks.

stefanz08 said:
hi man,
can you do the same for S20Ultra G988B?
or if you can share what you used to do maybe someone could do it for S20Ultra G988B.
thanks.
Click to expand...
Click to collapse
Hi, I only have S20 G980F. To release a custom firmware, I need to test it on real device to make sure it won't break your phone, because I can't expect everyone to have the ability to save their soft-bricked phone. I saw some people doing this to expect others to test for them, but that is not my current way of doing things, maybe it will change in the future. Thanks for understanding.

hmy65 said:
Hi, I only have S20 G980F. To release a custom firmware, I need to test it on real device to make sure it won't break your phone, because I can't expect everyone to have the ability to save their soft-bricked phone. I saw some people doing this to expect others to test for them, but that is not my current way of doing things, maybe it will change in the future. Thanks for understanding.
Click to expand...
Click to collapse
hi,
total understanding.
but if you can /want to send me a private message how it is doing and i will doing it for my onw. if you want.
and btw, the debloated ROM is rooter right? if you are using Magisk..

stefanz08 said:
hi,
total understanding.
but if you can /want to send me a private message how it is doing and i will doing it for my onw. if you want.
and btw, the debloated ROM is rooter right? if you are using Magisk..
Click to expand...
Click to collapse
It is rooted by patching boot.img with Magisk.
If you asking how to make this ROM, you need to use Linux. 1. extract tar 2. extract lz4 3. convert sparse img to ext img 4. mount and edit that img 5. convert ext img back to sparse img.

Can someone post system.img vendor.img unpacked from super.img

Thank you very much for your efforts, is there anyway to get my led cover working? I've tried downloading the APK with no luck

i understand it right, that i just have to unlock bootloader? So i only have to do stage 1,2 and then i can flash it?
And should i use my HOME_CSC (DBT)?

I just unlocked my boot loader, then booted system to check its unlocked in developer options, then flashed using Odin using only the files in the download,I didn't add my own home CSC,

bazz007 said:
Thank you very much for your efforts, is there anyway to get my led cover working? I've tried downloading the APK with no luck
Click to expand...
Click to collapse
Sorry, I didn't expect anyone use Samsung's offcial led cover. So I deleted that supported apk as a bloat. Next update I will include that apk.
Segelflugpilot said:
i understand it right, that i just have to unlock bootloader? So i only have to do stage 1,2 and then i can flash it?
And should i use my HOME_CSC (DBT)?
Click to expand...
Click to collapse
If you read the instruction carefully, you should notice I mentioned you don't need CSC.

No problem, thx

Yeah i have read that it is in the AP, but just want to be Sure, sorry. Thanks!

if editing system causes bootloop then u probably didnt disable avb.. u cant disable simply by editing vbmetq anymore.. theres more steps to it then that

elliwigy said:
if editing system causes bootloop then u probably didnt disable avb.. u cant disable simply by editing vbmetq anymore.. theres more steps to it then that
Click to expand...
Click to collapse
The way to disable avb is from ((https://forum.xda-developers.com/gal...mware-t4079353)), I mentioned that in the post.
However, I don't think bootloop is caused by avb.
I guess is caused by super.img. Cuz super.img uses logical partition, I use lpunpack/lpmake to unpack/repack that to system.img, product.img, odm.img, vendor.img.
I guess maybe some data lost during these processes causes the entire system.img uneditable, but it won't affect your normal daily use.
Cuz I tried only root with magisk with stock firmware, the entire system partition is read only. But with my repacked super.img, you can edit system partition, but it can cause bootloop.
There is no twrp for firmware packed with super.img, even they don't know how to mount logical partition properly, so I can only do my best lol

Please Help
Hi there, I'm having some issues flashing the three .tar files in Odin - Odin is getting stuck on <ID:0/005> up_param.bin
Please can you assist, thanks.

Andy1122 said:
Hi there, I'm having some issues flashing the three .tar files in Odin - Odin is getting stuck on <ID:0/005> up_param.bin
Please can you assist, thanks.
Click to expand...
Click to collapse
1.Are you using G980F the S20 4G version?
2.Check your devices is OEM unlocked.
3.From other members post, this ROM has no problem with odin at all.

Help needed changing Galaxy Watch SM-R800 Bluetooth 46 mm CSC with Tizen 4.0.0.7

Hello,
I need a little help because I’m trying to change CSC on my Galaxy Watch, SM-R800 46 mm Bluetooth (NO LTE) German version that I would like to switch to Spanish (PHE) to active Samsung Pay. It has ONE UI 1.5, Tizen 4.0.0.7 and software version R800XXU1DSL1.
I’m searching in the forum and I am finding tutorials for similar versions but nothing for R-800… because the other method in SDB doesn’t work with the new update.
I know that I need to use netOdin to downgrade but I don’t know which version firmware and where I can download it… I think that if I follow the steps of the tutorials (like: https://forum.xda-developers.com/smartwatch/galaxy-watch/sm-r825f-csc-change-tutorial-t4061905) but with the appropriate firmware I can get it.
Can someone please help with that?
Thanks in advance

I had same problem but I solved. You have to downgrade tizen version and after that change CSC with the old trick. After update the watch will keep the PHE region an will be able to use Samsung Pay.
Enviado desde mi iPad utilizando Tapatalk

reblups77 said:
I had same problem but I solved. You have to downgrade tizen version and after that change CSC with the old trick. After update the watch will keep the PHE region an will be able to use Samsung Pay.
Enviado desde mi iPad utilizando Tapatalk
Click to expand...
Click to collapse
Thanks for the quick reply!!! Do you know which Tizen version is necessary for it? To try to find the file

I have the same version of software R800XXU1DSL1. You have to downgrade to Tizen 4.0.0.4 and One UI 1.0
After downgrade you can change the CSC region from original tu PHE (Spain) Una vez echo esto cuando el reloj se actualiza guarda automáticamente el cambio. My watch came with Romanian CSC. You have to flash older firmware via NetOdin. I don’t remember where I downloaded. Just today I erase all what I use from my computer.
Enviado desde mi iPad utilizando Tapatalk

reblups77 said:
I have the same version of software R800XXU1DSL1. You have to downgrade to Tizen 4.0.0.4 and One UI 1.0
After downgrade you can change the CSC region from original tu PHE (Spain) Una vez echo esto cuando el reloj se actualiza guarda automáticamente el cambio. My watch came with Romanian CSC. You have to flash older firmware via NetOdin. I don’t remember where I downloaded. Just today I erase all what I use from my computer.
Enviado desde mi iPad utilizando Tapatalk
Click to expand...
Click to collapse
I have found Tizen 4.0.0.4 to download, although instead of being the combined file, I have to mount all three files (BL, AP and CSC) (I think it's not a problem)
The problem I am encountering after entering AP mode before using netOdin is that when connecting the computer to the Wi-Fi network that creates the clock, it keeps loading and appears "without internet, open" ... and appears on the clock "Connection fail: Connection timed out (110)" ... and therefore in netOdin it does not appear that the clock is connected since the IP address would have to appear, what am I doing wrong?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

You have to keep the display of the watch always on. Set the time to 5 min. Otherwise you can’t connect with the watch
Enviado desde mi iPad utilizando Tapatalk
---------- Post added at 02:35 PM ---------- Previous post was at 02:34 PM ----------
By the way, I can’t see the picture you attached.
Enviado desde mi iPad utilizando Tapatalk

I am reading about the problem: "Connection fail: Connection timed out (110)" but it's impossible to have that error... as soon as my computer detects the clock through Wi-Fi I immediately open netOdin without success because it doesn't detect the clock...

Did you connect the watch directly to your Wi-Fi network?
Enviado desde mi iPad utilizando Tapatalk
---------- Post added at 02:41 PM ---------- Previous post was at 02:38 PM ----------
I send you a PM.
Enviado desde mi iPad utilizando Tapatalk

reblups77 said:
Did you connect the watch directly to your Wi-Fi network?
Enviado desde mi iPad utilizando Tapatalk
---------- Post added at 02:41 PM ---------- Previous post was at 02:38 PM ----------
I send you a PM.
Enviado desde mi iPad utilizando Tapatalk
Click to expand...
Click to collapse
No, when I am in download mode and I change the mode WPS to the AP and I connect to the access point that appears (SM R-800) without success (in the connection status it appears "without internet, open"), thanks for the help!!! I will read your MP

Try to use a different computer, o an different OS. I used with Win10 Ultimate, and have no problems to connect watch with computer.
Enviado desde mi iPad utilizando Tapatalk

I'm going to try it on another computer because I can't continue with the tutorial, I have recorded a video of my problem to help understand it better:
EDIT:
I'm using this tutorial:
1. Hold down the Home button for 6-10 seconds until the message " Rebooting ... "
2. Quickly press Home three times until the Reboot Menu appears. (The menu is available for about 10 seconds, after which the clock goes back to "Rebooting ...")
3. The menu selection is made by long holding Home button. To go into Download (wireless mode) press the home button until "Download (Wireless)" is highlighted, then hold down the Home button.
4. Download mode will load in WPS mode. Press Home twice to change the mode to the AP.
5. Connect to the access point that appears (for example, SM-R800-a2a5) (ODIN for some reason does not see the device if several networks are connected.)
6. Run NetOdin3 and then set the firmware files for BL, AP and CSC, then click Start (Copying/flashing of firmware takes about 20 minutes).
7. After the files are downloaded, the Watch will reboot. Again, hold Home and highlight & select Recovery in the Reboot menu.
8. The "Setting Up" screen and "Resetting" screen should appear and after that the Watch will reboot and boot as usual.

I have succeeded, thank you very much for the help !!!

I'm glad to hear that. What it was the problem first time?
Enviado desde mi SM-G975F mediante Tapatalk

Mahtuerso said:
I have found Tizen 4.0.0.4 to download, although instead of being the combined file, I have to mount all three files (BL, AP and CSC) (I think it's not a problem)
The problem I am encountering after entering AP mode before using netOdin is that when connecting the computer to the Wi-Fi network that creates the clock, it keeps loading and appears "without internet, open" ... and appears on the clock "Connection fail: Connection timed out (110)" ... and therefore in netOdin it does not appear that the clock is connected since the IP address would have to appear, what am I doing wrong?
Click to expand...
Click to collapse
Hello, how did you know, which older firmware should you use? I have found 2-3 different one with 4.0.0.4, but I don't know which should I use?

Mahtuerso said:
Hello,
I need a little help because I’m trying to change CSC on my Galaxy Watch, SM-R800 46 mm Bluetooth (NO LTE) German version that I would like to switch to Spanish (PHE) to active Samsung Pay. It has ONE UI 1.5, Tizen 4.0.0.7 and software version R800XXU1DSL1.
I’m searching in the forum and I am finding tutorials for similar versions but nothing for R-800… because the other method in SDB doesn’t work with the new update.
I know that I need to use netOdin to downgrade but I don’t know which version firmware and where I can download it… I think that if I follow the steps of the tutorials (like: https://forum.xda-developers.com/smartwatch/galaxy-watch/sm-r825f-csc-change-tutorial-t4061905) but with the appropriate firmware I can get it.
Can someone please help with that?
Thanks in advance
Click to expand...
Click to collapse
I have the same the same GW with the same SW, and driving mad to solve the csc problem.
The question is: if it's needed to downgrade to change the csc, after it would be possible to get on with the downgraded upgrades?
I have tried to change the csc with the old method and everything has gone fine until the end, when the csc list wouldn't appear on the watch screen...

Mahtuerso said:
I have found Tizen 4.0.0.4 to download, although instead of being the combined file, I have to mount all three files (BL, AP and CSC) (I think it's not a problem)
The problem I am encountering after entering AP mode before using netOdin is that when connecting the computer to the Wi-Fi network that creates the clock, it keeps loading and appears "without internet, open" ... and appears on the clock "Connection fail: Connection timed out (110)" ... and therefore in netOdin it does not appear that the clock is connected since the IP address would have to appear, what am I doing wrong?
Click to expand...
Click to collapse
Do you still have the files by chance? I just got my watch, SM-R800 with Tizen 4007 - SCS is TTT) and need to change it to XAR for Samsung Pay.

Where did you get your firmware to downgrade?

i have the same issue for halaxy watch 46mm bluetooth region change for samsung pay.
Mahtuerso said:
I have succeeded, thank you very much for the help !!!
Click to expand...
Click to collapse
i have the same issue for halaxy watch 46mm bluetooth region change for samsung pay.
Would yoo mind sharing me the rom and method?

How To Guide [EWF1][OneUI 5.1] OFFICIAL STOCK FW (Jun 2023) | Z Fold3 International (SM-F926B)

In this thread, You can share and discuss other links of new official stock firmware for the Galaxy Z Fold 3 International (NO CUSTOM ROMs and/or ROOT talk).
How to flash firmware to your phone:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
1. Extract the firmware file (i.e. to folder C:\Odin) ***
2. Download Odin v3.14.4
3. Extract the Odin ZIP file (i.e. to folder C:\Odin)
4. Open Odin
5. Power OFF your Z Fold3
6. Reboot Phone in Download Mode: Hold down "Volume up" and "Volume down" at same time. While holding down, connect the your phone to your PC via USB. Or use the command "adb reboot-bootloader".
7. Wait until you get a blue sign in Odin
8. Add the firmware files to their designated slots (AP in AP, BL in BL, CP in CP, HOME_CSC in CSC). USERDATA stays EMPTY!
10. Click the start button, sit back and wait few minutes for the device to automatically restart.
*** You can find the latest firmware on Post #2

Latest firmware for the Galaxy Z Fold3
CHANGELOG:
• Stability and reliability
Device behavior has been improved.
• Security
The device is protected with improved security.
Click to expand...
Click to collapse
This is the latest ROM for Multi-CSC OXM and can be used for ALL CSC's mentioned in Multi-CSC OXM!
This is an official Samsung ROM so KNOX will not be triggered!
Model SM-F926B
Model name Galaxy Z Fold3
Country Multi-CSC OXM
Version Android 13
Changelist 26203421
Build date 2023-06-1
Security Patch Level 2023-06-01
Multi-CSC OXM
PDA F926BXXU4EWF1
CSC F926BOXM4EWF1
Details for download with Frija:
Unzip the archive and place the files in the designated slots in Odin 3.14.4
HOME_CSC_OXM -> data will stay intact
CSC_OXM -> device will reset to factory settings

Multi-CSC Descriptions
The Asian model (XTC by default) of the Z Fold3 (SM-F926B) will get a Multi-CSC designated as OXM and that is the main focus of this particular thread but others can and will be discussed.
CountryProduct CodeMulti-CSCAfghanistan(AFG)OXMAlbania(AVF)OXMAustralia(XSA)OXMAustralia(OPS)OXMAustralia(TEL)OXMAustralia(VAU)OXMAustria(DRE)OXMAustria(MOB)OXMAustria(MAX)OXMAustria(ATO)OXMBaltic(SEB)OXMBulgaria(BGL)OXMCaucasus Countries(CAU)OXMChile(CHO)OXMCroatia(CRO)OXMCroatia(VIP)OXMCzech Republic(XEZ)OXMCzech Republic(O2C)OXMCzech Republic(TMZ)OXMCzech Republic(VDC)OXMEgypt(EGY)OXMFrance(XEF)OXMFrance(BOG)OXMFrance(FTM)OXMFrance(SFR)OXMGermany(DBT)OXMGermany(DTM)OXMGermany(VD2)OXMGreece(EUR)OXMGreece(COS)OXMGreece(VGR)OXMHungary(XEH)OXMHungary(TMH)OXMIndia(INU)OXMIraq(MID)OXMIreland(TSI)OXMIreland(MET)OXMIreland(3IE)OXMIreland(VDI)OXMIsrael(ILO)OXMItaly(ITV)OXMItaly(HUI)OXMItaly(TIM)OXMItaly(OMN)OXMKazakhstan(SKZ)OXMKenya(AFR)OXMKenya(DKR)OXMLebanon(ILP)OXMLibya(BTC)OXMLuxembourg(LUX)OXMMacedonia(MBM)OXMMalaysia(XME)OXMMorocco(MWD)OXMNepal(NPL)OXMNetherlands(PHN)OXMNetherlands(TNL)OXMNetherlands(VDF)OXMNigeria(ECT)OXMNordic countries(NEE)OXMPakistan(PAK)OXMPanama(TPA)OXMPhilippines(GLB)OXMPhilippines(XTC)OXMPoland(XEO)OXMPoland(OPV)OXMPoland(PLS)OXMPoland(PRT)OXMPoland(TPL)OXMPortugal(MEO)OXMPortugal(TPH)OXMPortugal(TCL)OXMRomania(ROM)OXMRomania(COA)OXMRomania(ORO)OXMRomania(CNX)OXMRussia(SER)OXMSaudi Arabia(KSA)OXMSaudi Arabia(ACR)OXMSerbia(MSR)OXMSerbia(TOP)OXMSingapore(MM1)OXMSingapore(XSP)OXMSingapore(SIN)OXMSingapore(STH)OXMSlovakia(ORX)OXMSlovakia(ORS)OXMSlovakia(TMS)OXMSlovenia(SIO)OXMSlovenia(MOT)OXMSlovenia(SIM)OXMSouth Africa(XFE)OXMSouth Africa(XFA)OXMSouth Africa(XFV)OXMSouth East Europe(SEE)OXMSpain(PHE)OXMSpain(XEC)OXMSpain(AMO)OXMSpain(ATL)OXMSri Lanka(SLK)OXMSweden(HTS)OXMSwitzerland(AUT)OXMSwitzerland(SWC)OXMThailand(THL)OXMThailand(MYM)OXMTrinidad and Tobago(EON)OXMTunisia(TUN)OXMTurkey(TUR)OXMUkraine(SEK)OXMUnited Arab Emirates(LYS)OXMUnited Arab Emirates(XSG)OXMUnited Kingdom(BTU)OXMUnited Kingdom(EVR)OXMUnited Kingdom(H3G)OXMUnited Kingdom(O2U)OXMUnited Kingdom(VOD)OXMUnknown(EUX)OXMUnknown(EUY)OXMUnknown(XNZ)OXMUzbekistan(CAC)OXMVietnam(XXV)OXM
These are the other Multi-CSC types available that may see new updates released at different times:
CountryProduct CodeMulti-CSCArgentina(ANC)OWEChile(CHE)OWECosta Rica(ICE)OWEDominican Republic(DOR)OWEJamaica(CWW)OWEUnknown(BAT)OWE
CountryProduct CodeMulti-CSCArgentina(ARO)OWOArgentina(CTI)OWOArgentina(UFN)OWOArgentina(PSN)OWOBolivia(BVO)OWOBrazil(ZTO)OWOBrazil(ZTA)OWOBrazil(ZTM)OWOBrazil(ZVV)OWOChile(CRC)OWOChile(CHL)OWOChile(CHT)OWOColombia(COL)OWOColombia(COO)OWOColombia(COM)OWOColombia(COB)OWODominican Republic(CDR)OWOEcuador(EBE)OWOEcuador(ECO)OWOGuatemala(PGU)OWOGuatemala(CGU)OWOMexico(IUS)OWOMexico(TMM)OWOMexico(TCE)OWOPanama(CPA)OWOParaguay(UPO)OWOParaguay(PSP)OWOParaguay(TGP)OWOPeru(PET)OWOPeru(PEO)OWOPeru(PNT)OWOPeru(SAM)OWOSouth America(NBS)OWOUnknown(BVT)OWOUnknown(MXO)OWOUruguay(UFU)OWOUruguay(CTU)OWO
Lastly, phones with these product codes do not currently share CSC with different countries:
CountryProduct CodeCSCIndonesia(XID)OLE

RESERVED #3

Very good

annson08 said:
Multi-CSC Descriptions
The Asian model (XTC by default) of the Z Fold3 (SM-F926B) will get a Multi-CSC designated as OXM and that is the main focus of this particular thread but others can and will be discussed.
CountryProduct CodeMulti-CSCAfghanistan(AFG)OXMAlbania(AVF)OXMAustralia(XSA)OXMAustralia(OPS)OXMAustralia(TEL)OXMAustralia(VAU)OXMAustria(DRE)OXMAustria(MOB)OXMAustria(MAX)OXMAustria(ATO)OXMBaltic(SEB)OXMBulgaria(BGL)OXMCaucasus Countries(CAU)OXMChile(CHO)OXMCroatia(CRO)OXMCroatia(VIP)OXMCzech Republic(XEZ)OXMCzech Republic(O2C)OXMCzech Republic(TMZ)OXMCzech Republic(VDC)OXMEgypt(EGY)OXMFrance(XEF)OXMFrance(BOG)OXMFrance(FTM)OXMFrance(SFR)OXMGermany(DBT)OXMGermany(DTM)OXMGermany(VD2)OXMGreece(EUR)OXMGreece(COS)OXMGreece(VGR)OXMHungary(XEH)OXMHungary(TMH)OXMIndia(INU)OXMIraq(MID)OXMIreland(TSI)OXMIreland(MET)OXMIreland(3IE)OXMIreland(VDI)OXMIsrael(ILO)OXMItaly(ITV)OXMItaly(HUI)OXMItaly(TIM)OXMItaly(OMN)OXMKazakhstan(SKZ)OXMKenya(AFR)OXMKenya(DKR)OXMLebanon(ILP)OXMLibya(BTC)OXMLuxembourg(LUX)OXMMacedonia(MBM)OXMMalaysia(XME)OXMMorocco(MWD)OXMNepal(NPL)OXMNetherlands(PHN)OXMNetherlands(TNL)OXMNetherlands(VDF)OXMNigeria(ECT)OXMNordic countries(NEE)OXMPakistan(PAK)OXMPanama(TPA)OXMPhilippines(GLB)OXMPhilippines(XTC)OXMPoland(XEO)OXMPoland(OPV)OXMPoland(PLS)OXMPoland(PRT)OXMPoland(TPL)OXMPortugal(MEO)OXMPortugal(TPH)OXMPortugal(TCL)OXMRomania(ROM)OXMRomania(COA)OXMRomania(ORO)OXMRomania(CNX)OXMRussia(SER)OXMSaudi Arabia(KSA)OXMSaudi Arabia(ACR)OXMSerbia(MSR)OXMSerbia(TOP)OXMSingapore(MM1)OXMSingapore(XSP)OXMSingapore(SIN)OXMSingapore(STH)OXMSlovakia(ORX)OXMSlovakia(ORS)OXMSlovakia(TMS)OXMSlovenia(SIO)OXMSlovenia(MOT)OXMSlovenia(SIM)OXMSouth Africa(XFE)OXMSouth Africa(XFA)OXMSouth Africa(XFV)OXMSouth East Europe(SEE)OXMSpain(PHE)OXMSpain(XEC)OXMSpain(AMO)OXMSpain(ATL)OXMSri Lanka(SLK)OXMSweden(HTS)OXMSwitzerland(AUT)OXMSwitzerland(SWC)OXMThailand(THL)OXMThailand(MYM)OXMTrinidad and Tobago(EON)OXMTunisia(TUN)OXMTurkey(TUR)OXMUkraine(SEK)OXMUnited Arab Emirates(LYS)OXMUnited Arab Emirates(XSG)OXMUnited Kingdom(BTU)OXMUnited Kingdom(EVR)OXMUnited Kingdom(H3G)OXMUnited Kingdom(O2U)OXMUnited Kingdom(VOD)OXMUnknown(XNZ)OXMUzbekistan(CAC)OXMVietnam(XXV)OXM
These are the other Multi-CSC types available that may see new updates released at different times:
CountryProduct CodeMulti-CSCArgentina(ANC)OWEChile(CHE)OWECosta Rica(ICE)OWEDominican Republic(DOR)OWEJamaica(CWW)OWEUnknown(BAT)OWE
CountryProduct CodeMulti-CSCArgentina(ARO)OWOArgentina(CTI)OWOArgentina(UFN)OWOArgentina(PSN)OWOBolivia(BVO)OWOBrazil(ZTO)OWOBrazil(ZTA)OWOBrazil(ZTM)OWOBrazil(ZVV)OWOChile(CRC)OWOChile(CHL)OWOChile(CHT)OWOColombia(COL)OWOColombia(COO)OWOColombia(COM)OWOColombia(COB)OWODominican Republic(CDR)OWOEcuador(EBE)OWOEcuador(ECO)OWOGuatemala(PGU)OWOGuatemala(CGU)OWOMexico(IUS)OWOMexico(TMM)OWOMexico(TCE)OWOPanama(CPA)OWOParaguay(UPO)OWOParaguay(PSP)OWOParaguay(TGP)OWOPeru(PET)OWOPeru(PEO)OWOPeru(PNT)OWOPeru(SAM)OWOSouth America(NBS)OWOUnknown(BVT)OWOUnknown(MXO)OWOUruguay(UFU)OWOUruguay(CTU)OWO
Lastly, phones with these product codes do not currently share CSC with different countries:
CountryProduct CodeCSCIndonesia(XID)OLE
Click to expand...
Click to collapse
The links lead to S21 Ultra Software, not Z Fold3

hkr said:
The links lead to S21 Ultra Software, not Z Fold3
Click to expand...
Click to collapse
Thanks, updating rn.
EDIT: Updated. Please note that not all countries has firmware for them YET so some links will return as "not found".

annson08 said:
In this thread, You can share and discuss other links of new official stock firmware for the Galaxy Z Fold 3 International (NO CUSTOM ROMs and/or ROOT talk).
How to flash firmware to your phone:
View attachment 5498513
1. Extract the firmware file (i.e. to folder C:\Odin) ***
2. Download Odin v3.14.4
3. Extract the Odin ZIP file (i.e. to folder C:\Odin)
4. Open Odin
5. Power OFF your Z Fold3
6. Reboot Phone in Download Mode: Hold down "Volume up" and "Volume down" at same time. While holding down, connect the your phone to your PC via USB. Or use the command "adb reboot-bootloader".
7. Wait until you get a blue sign in Odin
8. Add the firmware files to their designated slots (AP in AP, BL in BL, CP in CP, HOME_CSC in CSC). USERDATA stays EMPTY!
10. Click the start button, sit back and wait few minutes for the device to automatically restart.
*** You can find the latest firmware on Post #2
Click to expand...
Click to collapse
SM-F926B Official Firmware One UI 4 (Android 12) for Bangladesh (BKD) available?

annson08 said:
Multi-CSC Descriptions
The Asian model (XTC by default) of the Z Fold3 (SM-F926B) will get a Multi-CSC designated as OXM and that is the main focus of this particular thread but others can and will be discussed.
CountryProduct CodeMulti-CSCAfghanistan(AFG)OXMAlbania(AVF)OXMAustralia(XSA)OXMAustralia(OPS)OXMAustralia(TEL)OXMAustralia(VAU)OXMAustria(DRE)OXMAustria(MOB)OXMAustria(MAX)OXMAustria(ATO)OXMBaltic(SEB)OXMBulgaria(BGL)OXMCaucasus Countries(CAU)OXMChile(CHO)OXMCroatia(CRO)OXMCroatia(VIP)OXMCzech Republic(XEZ)OXMCzech Republic(O2C)OXMCzech Republic(TMZ)OXMCzech Republic(VDC)OXMEgypt(EGY)OXMFrance(XEF)OXMFrance(BOG)OXMFrance(FTM)OXMFrance(SFR)OXMGermany(DBT)OXMGermany(DTM)OXMGermany(VD2)OXMGreece(EUR)OXMGreece(COS)OXMGreece(VGR)OXMHungary(XEH)OXMHungary(TMH)OXMIndia(INU)OXMIraq(MID)OXMIreland(TSI)OXMIreland(MET)OXMIreland(3IE)OXMIreland(VDI)OXMIsrael(ILO)OXMItaly(ITV)OXMItaly(HUI)OXMItaly(TIM)OXMItaly(OMN)OXMKazakhstan(SKZ)OXMKenya(AFR)OXMKenya(DKR)OXMLebanon(ILP)OXMLibya(BTC)OXMLuxembourg(LUX)OXMMacedonia(MBM)OXMMalaysia(XME)OXMMorocco(MWD)OXMNepal(NPL)OXMNetherlands(PHN)OXMNetherlands(TNL)OXMNetherlands(VDF)OXMNigeria(ECT)OXMNordic countries(NEE)OXMPakistan(PAK)OXMPanama(TPA)OXMPhilippines(GLB)OXMPhilippines(XTC)OXMPoland(XEO)OXMPoland(OPV)OXMPoland(PLS)OXMPoland(PRT)OXMPoland(TPL)OXMPortugal(MEO)OXMPortugal(TPH)OXMPortugal(TCL)OXMRomania(ROM)OXMRomania(COA)OXMRomania(ORO)OXMRomania(CNX)OXMRussia(SER)OXMSaudi Arabia(KSA)OXMSaudi Arabia(ACR)OXMSerbia(MSR)OXMSerbia(TOP)OXMSingapore(MM1)OXMSingapore(XSP)OXMSingapore(SIN)OXMSingapore(STH)OXMSlovakia(ORX)OXMSlovakia(ORS)OXMSlovakia(TMS)OXMSlovenia(SIO)OXMSlovenia(MOT)OXMSlovenia(SIM)OXMSouth Africa(XFE)OXMSouth Africa(XFA)OXMSouth Africa(XFV)OXMSouth East Europe(SEE)OXMSpain(PHE)OXMSpain(XEC)OXMSpain(AMO)OXMSpain(ATL)OXMSri Lanka(SLK)OXMSweden(HTS)OXMSwitzerland(AUT)OXMSwitzerland(SWC)OXMThailand(THL)OXMThailand(MYM)OXMTrinidad and Tobago(EON)OXMTunisia(TUN)OXMTurkey(TUR)OXMUkraine(SEK)OXMUnited Arab Emirates(LYS)OXMUnited Arab Emirates(XSG)OXMUnited Kingdom(BTU)OXMUnited Kingdom(EVR)OXMUnited Kingdom(H3G)OXMUnited Kingdom(O2U)OXMUnited Kingdom(VOD)OXMUnknown(XNZ)OXMUzbekistan(CAC)OXMVietnam(XXV)OXM
These are the other Multi-CSC types available that may see new updates released at different times:
CountryProduct CodeMulti-CSCArgentina(ANC)OWEChile(CHE)OWECosta Rica(ICE)OWEDominican Republic(DOR)OWEJamaica(CWW)OWEUnknown(BAT)OWE
CountryProduct CodeMulti-CSCArgentina(ARO)OWOArgentina(CTI)OWOArgentina(UFN)OWOArgentina(PSN)OWOBolivia(BVO)OWOBrazil(ZTO)OWOBrazil(ZTA)OWOBrazil(ZTM)OWOBrazil(ZVV)OWOChile(CRC)OWOChile(CHL)OWOChile(CHT)OWOColombia(COL)OWOColombia(COO)OWOColombia(COM)OWOColombia(COB)OWODominican Republic(CDR)OWOEcuador(EBE)OWOEcuador(ECO)OWOGuatemala(PGU)OWOGuatemala(CGU)OWOMexico(IUS)OWOMexico(TMM)OWOMexico(TCE)OWOPanama(CPA)OWOParaguay(UPO)OWOParaguay(PSP)OWOParaguay(TGP)OWOPeru(PET)OWOPeru(PEO)OWOPeru(PNT)OWOPeru(SAM)OWOSouth America(NBS)OWOUnknown(BVT)OWOUnknown(MXO)OWOUruguay(UFU)OWOUruguay(CTU)OWO
Lastly, phones with these product codes do not currently share CSC with different countries:
CountryProduct CodeCSCIndonesia(XID)OLE
Click to expand...
Click to collapse
SM-F926B Official Firmware One UI 4 (Android 12) for Bangladesh (BKD) available?

annson08 said:
Latest firmware for the Galaxy Z Fold3
* The Next OTA Update changelog screenshot will be inserted here *
This is the latest ROM for Multi-CSC OXM and can be used for ALL CSC's mentioned in Multi-CSC OXM!
This is an official Samsung ROM so KNOX will not be triggered!
What's new:
* Next Update's changelog will be inserted here *
Model SM-F926B
Model name Galaxy Z Fold3
Country Multi-CSC OXM
Version Android 12
Changelist **
Build date **
Security Patch Level **
Multi-CSC OXM
PDA F926BXXS1BUL6
CSC F926BOXM1BUL5
Details for download with Frija:
View attachment 5498529
Unzip the archive and place the files in the designated slots in Odin 3.14.4
HOME_CSC_OXM -> data will stay intact
CSC_OXM -> device will reset to factory settings
* Software Information Screenshot will be inserted here *
Click to expand...
Click to collapse
SM-F926B Official Firmware One UI 4 (Android 12) for Bangladesh (BKD) available?

shaifullah.ahad said:
SM-F926B Official Firmware One UI 4 (Android 12) for Bangladesh (BKD) available?
Click to expand...
Click to collapse
Sorry as you have asked three times the link has locked and you must try again tomorrow

I have EUX as product code. Will the firmware work?
/CK

Café King said:
I have EUX as product code. Will the firmware work?
/CK
Click to expand...
Click to collapse
yes, just choose HOME CSC.

shaifullah.ahad said:
SM-F926B Official Firmware One UI 4 (Android 12) for Bangladesh (BKD) available?
Click to expand...
Click to collapse
just use HOME CSC, doesn't matter if it's BKD, MSP, EUX, EUR or else.
As long as you have a SM-F926B model, not U model.

annson08 said:
Latest firmware for the Galaxy Z Fold3
* The Next OTA Update changelog screenshot will be inserted here *
This is the latest ROM for Multi-CSC OXM and can be used for ALL CSC's mentioned in Multi-CSC OXM!
This is an official Samsung ROM so KNOX will not be triggered!
What's new:
* Next Update's changelog will be inserted here *
Model SM-F926B
Model name Galaxy Z Fold3
Country Multi-CSC OXM
Version Android 12
Changelist **
Build date **
Security Patch Level **
Multi-CSC OXM
PDA F926BXXS1BUL6
CSC F926BOXM1BUL5
Details for download with Frija:
Unzip the archive and place the files in the designated slots in Odin 3.14.4
HOME_CSC_OXM -> data will stay intact
CSC_OXM -> device will reset to factory settings
* Software Information Screenshot will be inserted here *
Click to expand...
Click to collapse
CSC : XID MSR and XSP are all the same, it gives in Friya some difference bul6 bul5 bul4 or bul 6 bul 4 bul4, but when installed, they are identical from decmeber 1th, with same baseband, build number and all.

I´ve the Fold 3 with DBT Eu Germany, can i flash the Build
SM-F926B_1_20211223115230_4zv7w7a7n9_fac
HOME_CSC_OXM_F926BOXM1BUL5 ?
I´m a little afraid

Gojira-r32 said:
CSC : XID MSR and XSP are all the same, it gives in Friya some difference bul6 bul5 bul4 or bul 6 bul 4 bul4, but when installed, they are identical from decmeber 1th, with same baseband, build number and all.
Click to expand...
Click to collapse
MSR and XSP are the same since they both belong in the same multi-CSC family. XID is different, don't get confused. PDA might be the same but contents may differ a little bit. To avoid getting bugs or errors, if you are going to flash firmware from a different multi-CSC, do not use HOME_CSC (this will result in a factory reset).
ShadowK10 said:
I´ve the Fold 3 with DBT Eu Germany, can i flash the Build
SM-F926B_1_20211223115230_4zv7w7a7n9_fac
HOME_CSC_OXM_F926BOXM1BUL5 ?
I´m a little afraid
Click to expand...
Click to collapse
Yes, as long as your current firmware and the new firmware you downloaded belongs to the same multi-CSC, you can use HOME_CSC.

i always use HOME csc

annson08 said:
MSR and XSP are the same since they both belong in the same multi-CSC family. XID is different, don't get confused. PDA might be the same but contents may differ a little bit. To avoid getting bugs or errors, if you are going to flash firmware from a different multi-CSC, do not use HOME_CSC (this will result in a factory reset).
Yes, as long as your current firmware and the new firmware you downloaded belongs to the same multi-CSC, you can use HOME_CSC.
Click to expand...
Click to collapse
Will this wipe the data on my phone？

fripSide-NY said:
Will this wipe the data on my phone？
Click to expand...
Click to collapse
That depends if you are flashing to a different multi-CSC.
If you are flashing to a different multi-CSC then you are required to use CSC instead of HOME_CSC. But if you're flashing to the same multi-CSC, then you just have to use HOME_CSC.
annson08 said:
HOME_CSC_OXM -> data will stay intact
CSC_OXM -> device will reset to factory settings
Click to expand...
Click to collapse

Question All things related with GT2 Master Explorer edition (RMX3551)

I'm coming to talk about Realme GT2 Master Explorer edition (RMX3551).
It's been already 6 months using this device, the best device I ever had, but still struggling with China stuff, can't use WearOS devices, can't make backups in Google Drive, etc...
Up to now the only thing I know is to unlock the bootloader, so here we go:
First of all, ensure you are in Android 12, if not, you should downgrade version using OTA:
GT Master Exploration Edition : https://pan.baidu.com/share/init?surl=qXtbSfyifGm-LiJ7nEIX8w (code: dfng)
Once you are on Android 12, you can continue with the guide:
1. Support unlocked models
Realme GT2 Master Exploration Edition (RMX3551)
2. Matters needing attention
[BL unlocking must meet the following conditions]
It must be the True Self GT2 Master Explorer Edition purchased through official channels in mainland China
【BL Unlocking Instructions】(Important!!!)
1. After unlocking, it may have an unpredictable impact on the phone;
2. The third-party firmware may cause some functions of the mobile phone to fail to operate normally, for example, the camera function is unavailable, and may cause damage to the device;
3. It may cause leakage of private personal information on the mobile phone;
4. After unlocking, it will affect the system upgrade, and the user cannot receive the subsequent update version of realme UI;
5. After unlocking, the mobile phone status is equivalent to restoring the factory settings, and all user personal data will be cleared. It is recommended to back up the data in advance;
6. After the mobile phone is rooted, if necessary, you can contact the realme service center to assist in flashing the phone. If you can flash back to the official version, it will not affect the warranty status of the phone, but you will not be able to enjoy the return and exchange service; if you cannot flash back to the official version or the resulting If the hardware of the mobile phone fails, it is not covered by the warranty and needs to be repaired according to the situation.
3. How to unlock BL?
Preparation:
1. Download the dedicated unlocking tool APK for Realme GT2 Master Explorer Edition:
Link: https://pan.baidu.com/s/1lLPGjU2pVn8To9c7bd4LGA
Extraction code: 8023
2. The battery power of the mobile phone is kept above 60%
3. Prepare a USB data cable
4. Prepare a PC / Macbook
Officially begin:
Step 1, turn on developer mode
Go to "Settings" → "About Phone" → "Version Information", click "Version Number" 7 times to open the developer mode;
Step 2, open oemlock
Go to "Settings" → "Other Settings" → "Developer Mode" and turn on OEM unlocking;
Step 3, use APK to enter fastboot mode
Connect to the network, open the APK, and apply for unlocking in the APK.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Step 4, click "Start Application", please read the "Disclaimer" carefully and manually tick to agree.
Step 5, click "Submit Application" and then click "Return" to return to the application interface, wait for about 15 minutes. You can check whether the application has passed the review through "Check Review Status" on the application interface.
Step 6, unlock fastboot
After passing the review, click "Start Depth Test", and the phone will restart to the START interface
(The following is the real picture of the unlocking process)
Step 7, connect to the computer, run: fastboot flashing unlock
a. Go to https://www.xda-developers.com/google-releases-separate-adb-and-fastboot-binary-downloads/ to download the platform-tools tool for Windows
b. After downloading, extract it to the root directory of the c drive
c. Keyboard Win + R, enter CMD and then Enter
d. Enter cd.. and then Enter until C:\
e. Enter cd platform-tools and enter
f. Enter fastboot flashing unlock and Enter to continue step 8 of this post
Step 8, follow the prompts on the phone interface, press the volume up button to select unlock, and after a three-second countdown, the phone will enter the interface of the picture on the right.
Step 9, run the command: fastboot reboot on the computer adb, and the phone will automatically restart.
NOTE: This restart will erase all user data.
4. Lockback Tutorial
method one:
In the off state, press the volume down button and the power button at the same time to enter the BootLoader interface, connect to the computer, and enter: fastboot flashing lock
The phone will enter the lock interface, press the volume up button to select the lock bootloader, and after a three-second countdown, the phone will enter the interface of the picture on the right
Computer adb run command: fastboot reboot, the phone will automatically restart.
Method Two:
The mobile phone is turned on and connected to the computer, enter: adb reboot bootloader
The phone will enter the BootLoader interface
Enter: fastboot flashing lock
The phone will enter the lock interface, press the volume up button to select the lock bootloader, and after a three-second countdown, the phone will enter the interface of the picture on the right
Computer adb run command: fastboot reboot, the phone will automatically restart.
After completing the Bootloader lock by any of the above two methods, please download the unlock APK to complete the installation, and apply for exiting the in-depth test on the application interface.
It is stated again that the operation of BL unlocking will have the following risks! ! ! Very important and a must see!
1. After unlocking, it may have an unpredictable impact on the phone;
2. The third-party firmware may cause some functions of the mobile phone to fail to operate normally, for example, the camera function is unavailable, and may cause damage to the device;
3. It may cause leakage of private personal information on the mobile phone;
4. After unlocking, it will affect the system upgrade, and the user cannot receive the subsequent update version of realme UI;
5. After unlocking, the mobile phone status is equivalent to restoring the factory settings, and all user personal data will be cleared. It is recommended to back up the data in advance;
6. After the mobile phone is rooted, if necessary, you can contact the realme service center to assist in flashing the phone. If you can flash back to the official version, it will not affect the warranty status of the phone, but you will not be able to enjoy the return and exchange service; if you cannot flash back to the official version or the resulting If the hardware of the mobile phone fails, it is not covered by the warranty and needs to be repaired according to the situation.
THANKS FOLKS!

I really wanted a custom ROM.

thanks for contribution, I'm using Realme GT2 Master explorer edition, the Chinese version of Realme UI 4.0 rom with built-in Google services, Android 13. It's been about 3 months since Realme UI has not received any new updates.

mrducluan said:
thanks for contribution, I'm using Realme GT2 Master explorer edition, the Chinese version of Realme UI 4.0 rom with built-in Google services, Android 13. It's been about 3 months since Realme UI has not received any new updates.View attachment 5916091
Click to expand...
Click to collapse
Could you tell me where I can find this ROM? Thanks.

JaymeBA said:
Could you tell me where I can find this ROM? Thanks.
Click to expand...
Click to collapse
I sent you the link in a private message.

I wish to have a Global Rom too, but it's like Realme decided not to go forward with this....sadly.

Full OTA C15
RMX3551_13.1.0.101(CN01)
RMX3551_11.C.15_1150_202305222028

Stano36 said:
Full OTA C15
RMX3551_13.1.0.101(CN01)
RMX3551_11.C.15_1150_202305222028
Click to expand...
Click to collapse
Trae idioma en español?
Compre el realme gt 2 máster edición y no se actualiza
Mod translation:
Does it bring language in Spanish?
I bought the realme gt 2 master edition and it does not update

Franciscozx said:
Mod translation:
Does it bring language in Spanish?
Click to expand...
Click to collapse
Greetings, and welcome to XDA. As a friendly reminder, we ask all members to please post in English as stipulated by XDA Rule #4:
Spoiler: XDA Rule #4
4. Use the English language.
We understand that with all the different nationalities, not everyone speaks English well, but please try. If you're really unable to post in English, use an online translator. You're free to include your original message in your own language, below the English translation. (This rule covers your posts, profile entries and signature). You could try :- https://translate.google.com/ or https://www.babelfish.com/ or use one of your choice.
Thank you for your cooperation, and have a pleasant day.
-Regards: Badger50

Stano36 said:
OTA completo C15
RMX3551_13.1.0.101(CN01)
RMX3551_11.C.15_1150_202305222028
Click to expand...
Click to collapse
¿Esta ROM tiene idioma español?

Franciscozx said:
¿Esta ROM tiene idioma español?
Click to expand...
Click to collapse
Rom designed for Chinese device.I don't know if it contains the Spanish language.

mrducluan said:
gracias por su contribución, estoy usando Realme GT2 Master explorer edition, la versión china de Realme UI 4.0 rom con servicios de Google incorporados, Android 13. Han pasado aproximadamente 3 meses desde que Realme UI no recibió ninguna actualización nueva.View attachment 5916091
Click to expand...
Click to collapse
¿Esta ROM tiene idioma español?

Stano36 said:
Full OTA C15
RMX3551_13.1.0.101(CN01)
RMX3551_11.C.15_1150_202305222028
Click to expand...
Click to collapse
I wanted to clarify a doubt. You said you have the ROM with integrated google services. Do all RMX3551 owners have the same ROM? Does this ROM already come with playstore and google services pre-installed? Thanks again.

JaymeBA said:
I wanted to clarify a doubt. You said you have the ROM with integrated google services. Do all RMX3551 owners have the same ROM? Does this ROM already come with playstore and google services pre-installed? Thanks
Click to expand...
Click to collapse
It's an OTA update for the Chinese version, it probably won't include Google services.

I can't download the downgrade file, could you re-upload in google drive or something ?

Sakeadoor said:
First of all, ensure you are in Android 12, if not, you should downgrade version using OTA:
GT Master Exploration Edition : https://pan.baidu.com/share/init?surl=qXtbSfyifGm-LiJ7nEIX8w (code: dfng)
Click to expand...
Click to collapse
I've downloaded the downgrade file, but it's not for GT2 RMX3551, it's for GT RMX3366

BIBUBO BCJ said:
I've downloaded the downgrade file, but it's not for GT2 RMX3551, it's for GT RMX3366
Click to expand...
Click to collapse
Rollback for RMX3551 GT2 EE
https://rbp01.realme.net/RMX3551/RMX3551_11_A_OTA_0180_all_86b356_CN.zip