{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Evolution X 6.0 for the OnePlus 9 Pro [lemonadep]
Code:
/*
* Your warranty is void. Or vaild, probably?
*
* I am not responsible for bricked devices, dead SD cards, Ebolation X,
* thermonuclear war, or the current economic crisis caused by you following
* these directions. YOU are choosing to make these modificiations, and if
* you point your finger at me for messing up your device, I will LMAO at you.
*/
Living, Breaking, Keep Evolving.
Pixel UI, customization and more, we are Evolution X!
- Team Evolution X -
@joeyhuab
@peaktogoo (Now RealAkito)
Reach us on Twitter! @EvolutionXROM
What are our features?
- Just flash and check "The Evolver"
Verizon SIm Cards not being detected Fixed!
DO NOT FLASH GAPPS, ALREADY INCLUDED
DO NOT FLASH GAPPS, ALREADY INCLUDED
First Time Install / Clean Flash [From Another AOSP Rom or Oxygen OS 11]Pre-requisites : Latest Oxygen OS 11 Firmware!
Steps :
- Download lineageos recovery image for your variant.
- Boot to Bootloader by either using the command adb reboot bootloader or by manually turning off the device and pressing and holding Vol Up and Vol Down while pressing the Power Button to turn it on.
- Flash the Recovery Image by using the command: fastboot flash boot lineageos-recovery.img [Replace lineageos-recovery.img with proper name of the downloaded img file]
- Reboot to Recovery Mode directly by using the command fastboot reboot recovery or by manually selecting the option “Reboot to Recovery” using the Power and Volume buttons while still being in Bootloader
- Once in Recovery Mode, Choose “Factory Reset” and accordingly choose “Format Data / Factory Reset” [Note: This will wipe your data!]
- Once Format Data is done, go to “Apply Update” and select “Apply from ADB”
- Now on your system, write the command adb sideload evo.zip to start sideloading. _[Replace evo.zip with proper name of the downloaded ROM Zip]_
- Once done, Reboot to System.
From ColorOS 12 / Oxygen OS 12
- Flashing on top of ColorsOS / Oxygen OS 12 is not yet supported, so consider rolling back to Android 11
- The easiest way to do it is to use MSM Tool
- Once back in OxygenOS 11, follow the instructions for Flashing from Oxygen OS 11 / Another AOSP Custom ROM
From existing Evolution-X Builds
- Reboot to Recovery
- Press Volume Up + Power Button to display options
- Use Volume Buttons to navigate to “Update via ADB” option
- Select it using Power Button
- On PC use the command : adb sideload evo.zip to start install
- Reboot once done
Light Screenshots / Dark Screenshots / Download
Donate to me! / Official Chat / Device Support
Android OS version: 12
Security patch level: January 2022
Build Author: Hardik Srivastava
Source Code: https://github.com/Evolution-X
Kernel Source Code: https://github.com/Xtended-Devices/kernel_oneplus_sm8350/
ROM Developer: joeyhuab
Please make sure to Join the Telegram Group for taking part in the device-related discussion and to report bugs quicker as I am more active there :
Evolution X - OnePlus 9 & 9 Pro
Evolution X - OnePlus 9/9 Pro Always read rules! Off Topic - @EvolutionXOT General Official - @EvolutionX News - @EvolutionXOfficial Updates - @EvolutionXUpdates @EvolutionXOnePlus6 @EvolutionXOnePlus7 @EvolutionXOnePlus8
t.me
Changelog :
Feb 23 2022
(Device Specific)
- Fixed IFAA / Alipay support
- Update RIL and IMS blobs
(ROM Specific)
- Feb 2022 Security Patch
- Added App Lock
- Added Face Unlock
- Added some new icons for Status Bar Items
- Added toggle to spoof Google Photos and get Unlimited Photo Backup
- Added toggle to spoof Many Games and unlock higher FPS settings
- Added toggle to spoof OTT Apps and unlock higher playback settings
- Updated Animations and functioning of Alert Slider
- Added Amoled Black theme under Monet Settings
Download: Here
Jan 25 2022
(Device Specific)
- Fixed Fingerprint Flicker while unlocking
- Fixed Verizon Sim Card Support
- Added proper codename according to device variant
- Added IFAA / Alipay support
(ROM Specific)
- Added Game Mode
- Added a bunch of new fonts
- Added Fingerprint Icon customization
- Added Fingerprint Recognizing Animation customization
- Added toggle for Camera/Mic Privacy Indicator
Full Changelog : Here
Download : GDrive
Jan 14 2022
- Initial Android 12 build
Download : GDrive
reserved
In Gdrive, there are two files:
1. Evolution 12 for OP9PRO
2. Patch for lemonadep? (What is this file).
break.cold said:
In Gdrive, there are two files:
1. Evolution 12 for OP9PRO
2. Patch for lemonadep? (What is this file).
Click to expand...
Click to collapse
first is the rom zip, 2nd is the magisk patched boot.img file for root
Oh right. Then flashing time
nuhad13320 said:
first is the rom zip, 2nd is the magisk patched boot.img file for root
Click to expand...
Click to collapse
I gather that because I am using AOSPA 12 atm I need to flash stock OOS 11 first if I wanna try this ROM out, right?
pyry666 said:
I gather that because I am using AOSPA 12 atm I need to flash stock OOS 11 first if I wanna try this ROM out, right?
Click to expand...
Click to collapse
Yep.
i must be wrong, as you've already stated. I just jumped the boat onto A12 AOSP rom from another A12 AOSP rom. I'm just curious if there's any chance? (i can't msm since i have no windows atm)
Rishwan said:
i must be wrong, as you've already stated. I just jumped the boat onto A12 AOSP rom from another A12 AOSP rom. I'm just curious if there's any chance? (i can't msm since i have no windows atm)
Click to expand...
Click to collapse
You can try jumping from ASOP rom 12 to another ASOP rom 12. I done that myself before. But then again, you don't have Windows machine to flash rom.
In all honest I like custom rom more then OOS. But due to some additional functionality and features like change screen resolution from UHD to Full HD, Dolby Atoms and most importantly OOS camera functionality make's me go back to OOS 11. I personally hate OOS 12, it's **** what Oneplus did with it OS.
Hi, just asking does this rom support the video enhancement engine in the phone, like video motion enhancement (MEMC), video image sharpener, video color enhancer. MEMC in action is a site to behold, technology just keeps getting better with every passing day. Also wrap charge?
freegame619 said:
Hi, just asking does this rom support the video enhancement engine in the phone, like video motion enhancement (MEMC), video image sharpener, video color enhancer. MEMC in action is a site to behold, technology just keeps getting better with every passing day. Also wrap charge?
Click to expand...
Click to collapse
Rapid charging is available only. The rest is not. If you want all the features you describe in your question you better off staying away from custom roms and stay with OOS.
break.cold said:
Rapid charging is available only. The rest is not. If you want all the features you describe in your question you better off staying away from custom roms and stay with OOS.
Click to expand...
Click to collapse
Warp charge works on most ROMs. Its a hardware/kernel feature not ROM feature. I tested on both ROMs StagOS and EvolutionX, both work. Warp charge 50W wireless aswell as warp charger 65W wired. It just shows Rapid Charging instead of warp charging and wrong time "Full in 1hr, 24 min". I hope the time will either be removed or patched in coming updates. I also would love to see it say warp charge with warp charge animation preferably,
New Update is up with Fingerprint Flicker and Verizon Issue Fixed!
Join : https://t.me/EvolutionXOnePlus9 for quicker support.
Klawzzy said:
Warp charge works on most ROMs. Its a hardware/kernel feature not ROM feature. I tested on both ROMs StagOS and EvolutionX, both work. Warp charge 50W wireless aswell as warp charger 65W wired. It just shows Rapid Charging instead of warp charging and wrong time "Full in 1hr, 24 min". I hope the time will either be removed or patched in coming updates. I also would love to see it say warp charge with warp charge animation preferably,
Click to expand...
Click to collapse
Nice Idea! Would try to add it for sure.
Just out of curiosity is this official EvolutionX rom or unofficial.
break.cold said:
Just out of curiosity is this official EvolutionX rom or unofficial.
Click to expand...
Click to collapse
Official
Good rom
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
#include <std_disclaimer.h>
/*
* Your warranty is... still valid?
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Pixys is a butter smooth Android aftermarket firmware. We handpicked the best features around and are adding our own juice into it.
Get ready to taste the unique features it brings with itself.
We aim to deliver an experience with original ideas and features along with the useful things the community is accustomed to.
@Subinsmani
@rahul9999
@@ki
@Shreejoy Dash
@kvijaya
@AxelBlaz3
@Psycho-Mods
@aswin_a_s
@gero
@melvingarcia
]
Support Us if you like our work
[SIZE=+1]Got an issue or suggestion? Reach us at[/SIZE]
Telegram: https://telegram.me/pixysos_chat
Status Bar
- Traffic Indicators
- Double-tap on Status Bar To Sleep
- System items(Enable/Disable status bar Icons)
- Battery Icone Style
- Battery percentage
- Battery Bar
- Roaming Indicator
- Data Icons(Enable /Disable)
- Old Style Signal Icon
- 4G/LTE Icon
- VoLTE Icon(Enable/Disable)
- Clock And date Customization
Quick Settings
- QS Viberation
- Brightness Slider Position
- Auto Brightness Icon(Enable /Disable)
- QS Icon Animations
Notification
- Heads Up
- Noisy Notification
- Notification Header(Enable/Disable)
- In Call Viberation
Buttons
- Acidental Touch
- Hardware Key Customizations
- Navigation Button Customization
- Voulume Button Customizations
Lockscreens
- Pulse Ambient Display on New Song
- Media Artwork
- Fingerprint Settings
- Double Tap on Lockscreen to Sleep
- Lockscreen Charging
Gestures
- Include all AOSP Gestures
- Three Finger Screenshot Gesture
- Adaptive Playback
- Playback Control
Miscelleneous
- Gaming Mode
- Toast App Icon
- Enable Auto battery Saver
- Agressive battery
Pixys: PixysOS
Pixys Device Sources: PixysOSDevices
- Backup your personal data (Important)
- Download the ROM and GApps and transfer them to your device.
- Boot to recovery (TWRP recommended).
- Wipe the System, Cache, Data and ART/Dalvik cache.
- Flash the ROM and reboot to system
- Reboot to recovery and flash Gapps Zipfile.
- Flash the root solution of your choice (optional).
- Reboot your device.
The ROM has GApps persistence in between dirty flashes, so you only have to flash them once!
The root solution should be flashed together with every update (= ROM Update)
Currently Supported Root Solutions:
Magisk stable
Magisk versions higher than 14.0 doesn't require flash on every dirty flash depending on the device, some devices need you to flash it every time, unless your maintainer says otherwise it should be fine
ROM: PixysOS-v3.1.3-miatoll-OFFICIAL-20200915-205919.zip
GApps:
OpenGApps Pico
(Please do note to flash GApps only after booting into the ROM and not directly after the ROM zip is flashed)
You tell...
- Google for AOSP
- AOSCP
- Dirty Unicorns
- Pixel experience
- AOSP extended
- LineageOS
- Nitrogen Os
- Bootleggers Rom
- Superior OS
- AICP & POSP Team for thread template idea
- Also many pro devs who all help us to bring this rom to you..
- Please let us know if we forgot to mention your name in credits..
XDA:DevDB Information
Contributors:
@demon000
@erfanoabdi
@TheMalachite
Kernel source:
https://github.com/Demon000/kernel_xiaomi_sm6250
ROM OS Version: Ten
ROM Kernel: Linux 4.14.x
Based On: AOSP
Version Information
Status: Beta/Stable
Current Version: v3.1.3
Release Date: 08-28-2020
=======================================================
Official build 2:
15/09/2020
Changelog:
• Fix Screenrecorder
• Set brightness & screen timeout defaults
• Disable UI touch sounds by default
• Increase ZRAM to 2GB
• Use vibration pattern from pixel 2
• Hide sRGB toggle in developer options
• Use Coral R fp (Safetynet passes)
Source Changelog For PixysOS v3.1.3
1. September Security Patch Merged
2. Added rounded corners
3. Added theme options in Display Setting
4. Improved screen record layout
5. Improved notification media seekbar
6. Added Unspecialized App Process Pool(For supported devices)
Android R News:
We are working on Android R bring up. We will start release Beta build on coming weeks.
We are not planning to end Android 10 as of now.
Thank You For Your Support.
=======================================================
=======================================================
Official Build 1:
31/08/2020
Changelog:
• Initial official build
• Add call recorder
• Add wake screen for new notifications (Ambient Display)
• Add battery health info
• Face unlock added with official!
Notes:
• Gapps not included, flash them after first boot
• Dirty flash over previous unofficial build is fine
• Based on miatoll tree
=======================================================
OGHyperion said:
Reserve
Click to expand...
Click to collapse
Which rom do you think its more stable sir, Thanks for everything
Newbie question, but what does Miatoll refer to?
Great, I'm on it right now.
Just had problems with the setup wizard and couldn't restore so I had to setup as new.
Beside that, it's really good, smooth as butter, battery has been good so far and no bugs found.
Thnx.
Rensjem said:
Which rom do you think its more stable sir, Thanks for everything
Click to expand...
Click to collapse
Well.. I cannot actually answer that! Every ROM is good I think!
JustArran said:
Newbie question, but what does Miatoll refer to?
Click to expand...
Click to collapse
MiAtoll is an unified source for all of Xiaomi's Sanapdragon 720G Devices!
Meaning, Redmi Note 9S(Curtana) , Redmi Note 9Pro(Joyeuse), Redmi Note 9Pro Max(Excalibur) & POCO M2 Pro(Gram) have the same processor so our Lineage dev unified them into one tree..
Technically ROMs built on MiAtoll trees should work on all these 4 phones!
Hope you understood by now!:laugh:
siling_bmth said:
Great, I'm on it right now.
Just had problems with the setup wizard and couldn't restore so I had to setup as new.
Beside that, it's really good, smooth as butter, battery has been good so far and no bugs found.
Thnx.
Click to expand...
Click to collapse
Aah! Yes... That is why I said we need to flash the rom, boot into the rom and then flash gapps after rebooting to recovery!
But it's okey.. now you've set it up like new!
Glad you liked the ROM
im getting a vendor error when installing a custom kernel.
I tried two other roms and was getting either a vendor mount error or system error. Will it happen with this one?
What about fast charging? Does 30W charge for joyeuse working?
ukiya16 said:
im getting a vendor error when installing a custom kernel.
Click to expand...
Click to collapse
hello.. as of now.. i do not recommend a custom kernel! sorry about that!
pbamoney said:
I tried two other roms and was getting either a vendor mount error or system error. Will it happen with this one?
Click to expand...
Click to collapse
A good old clean flash could help!:angel:
Sonny37 said:
What about fast charging? Does 30W charge for joyeuse working?
Click to expand...
Click to collapse
I asked for testers in the Joyeuse community.. and found none.. so i can't confirm that!
Btw, New build is up and we are now Official!:fingers-crossed::good:
Does this got screen bleed problem?
Dope ??
Tried the native screen recording on my Redmi Note 9S but all I got was green video.
OGHyperion said:
Well.. I cannot actually answer that! Every ROM is good I think!
MiAtoll is an unified source for all of Xiaomi's Sanapdragon 720G Devices!
Meaning, Redmi Note 9S(Curtana) , Redmi Note 9Pro(Joyeuse), Redmi Note 9Pro Max(Excalibur) & POCO M2 Pro(Gram) have the same processor so our Lineage dev unified them into one tree..
Technically ROMs built on MiAtoll trees should work on all these 4 phones!
Hope you understood by now![emoji23]
Aah! Yes... That is why I said we need to flash the rom, boot into the rom and then flash gapps after rebooting to recovery!
But it's okey.. now you've set it up like new!
Glad you liked the ROM
Click to expand...
Click to collapse
Why curtana in title then?
Sent from my MI 3W using Tapatalk
so i have joyeuse can i flash it over latest miui?
Only issue I have is my SD card. It is asking me to format it when selecting it as portable storage.
*Also fails cts and integrity after flashing magisk.
epulrevo said:
Does this got screen bleed problem?
Click to expand...
Click to collapse
Not if you're using the shipped stock kernel!
mdkaiom95 said:
Dope
Click to expand...
Click to collapse
thanks bruv!
carlshark said:
Tried the native screen recording on my Redmi Note 9S but all I got was green video.
Click to expand...
Click to collapse
I am so sorry! it was a mistake! i forgot to test it before releasing.. will be fixed in next update! please hang on till then!:fingers-crossed:
Zarkusi said:
Why curtana in title then?
Sent from my MI 3W using Tapatalk
Click to expand...
Click to collapse
I own a curtana and i tested it by myself.. later proven to work on joyeuse and gram as well.. will change the title soon!
didicola said:
so i have joyeuse can i flash it over latest miui?
Click to expand...
Click to collapse
yes u can.. do make wipes before!
stdfr33 said:
Only issue I have is my SD card. It is asking me to format it when selecting it as portable storage.
*Also fails cts and integrity after flashing magisk.
Click to expand...
Click to collapse
CTS Fails because i didn;t include a custom fp.. the stock fp is included for all the devices... maybe in future i can try switching to pixel fp to make CTS work!
regarding the sd card.. i really have no idea!
OGHyperion said:
CTS Fails because i didn;t include a custom fp.. the stock fp is included for all the devices... maybe in future i can try switching to pixel fp to make CTS work!
regarding the sd card.. i really have no idea!
Click to expand...
Click to collapse
Thanks for the speedy response. I should be able to live without cts matching. The SD card problem I could also just transfer files over again. Do you have a recommended link for a recovery to install with? Right now I am using PBRP. Thanks!
Yes, I had the same problem. It forced me to format my SD card as well. Never seen that before.
lindercannon said:
Yes, I had the same problem. It forced me to format my SD card as well. Never seen that before.
Click to expand...
Click to collapse
Go to recovery mod connect to pc , copy everything from sd to desktop , format sd card with the rom , copy back
this is how i solved
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CAF Android 11.0 - LA.UM.9.x
for the Xiaomi Redmi Note 8/8T
Code:
/* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
What's CAF?
CAF stands for Code Aurora Forum. It's a fork of AOSP which is well optimized for Qualcomm Snapdragon platforms and has a higher degree of performance, battery life, and functionality compared to plain AOSP. In addition to the opensource CAF android base, these builds also use Qualcomm's proprietary Android 11 Board Support Package (BSP) for Snapdragon 665, to ensure maximum compatibility and functionality with Android 11. It can also be called an engineered ROM, as it's built from pure CAF sources and BSP in the same way OEMs do.
CAF system version: LA.QSSI.11.0.r1-07000-qssi.0
CAF vendor version: LA.UM.9.11.r1-02100-NICOBAR.0
Security patch: November 2020
Build status: Stable | Enforcing | User | release-keys
Features on top of pure CAF 11
Merged november security patch and AOSP 11.0_r15 tag
Theming support - accents, fonts, icon packs from pixel 5
Rounded icons and corners by default
Disabled unlock animations
Black as default dark theme
Blur tweaked and enabled by default
Improved scrolling responsiveness
Faster screenshot capture and dismissal
Mini panel for wifi and NFC
QS Panel rows/columns customisation
Auto 3x3 QS panel when media player is hidden
Bluetooth battery level on statusbar
Advanced reboot options
Tweaked statusbar icon paddings
Battery light toggle (ginkgo only)
Dedicated battery saver extended to kernel-level
Removed screen recorder audio restrictions
Double tap to sleep on lockscreen
Xiaomi Parts - dirac, clear speaker
Vulkan as default UI renderer
ART and bionic optimizations
Cleaned up useless CAF apps
Permissions hub
MicroG support
Misc fixes & stability improvements
GApps build features - all of the above, and:
Inbuilt gapps replacing AOSP/CAF apps
Pixel theme by default
Pixel sounds
Pixel dark bootanimation
Pixel launcher
Pixel theme picker
Pixel live wallpapers
Pixel screenshot editor (Markeup)
Enhanced battery stats (Turbo)
Lockscreen Smart Space
Introducing QuicksilveR kernel v2 rebased on CAF's latest android 11 kernel source and 4.14 linux stable merged in!!
What's working?
Boots
RIL (Calls, SMS)
Mobile data
Bluetooth
Bluetooth Audio
WiFi/hotspot
VoLTE, VoWiFi
Media (audio/video)
Cameras
Camcorder, EIS
GPS
Fingerprint sensor
Notification LED (on ginkgo)
NFC (on willow)
DRM/widevine
Sensors
IR Blaster
WiFi Display
Enforcing SELinux
Offline charging
FM Radio
SafetyNet
ADB
etc.
What's broken?
Encryption (decrypted by default)
You tell me!
How to install?
MANDATORY - be on latest android 10 firmware
Wipe system, vendor, cache
Format data
Flash ROM
Reboot
Enjoy CAF's Android 11 goodness on your ginkgo/willow!
How to upgrade from an older build?
Wipe system, vendor, cache, dalvik
Flash ROM
Flash MagiskR.zip (optional)
Reboot
How to get root? (optional)
After 1st boot, reboot to recovery, flash MagiskR.zip and reboot.
Downloads (vanilla/gapps)
ROM: https://www.androidfilehost.com/?w=files&flid=319085
Firmware: ginkgo | willow (android 10)
Screenshots
GApps - https://imgur.com/a/6pqCD8q
Vanilla - https://imgur.com/a/hQKIix9
NOTE: Make sure to read the FAQ in post #2 before asking questions. For reporting any bugs, describe the issue properly and make sure to accompany it with a logcat. Without a logcat, bugs cannot and will not be fixed.
Don't forget to hit the thanks button to show love and support my work.
XDA:DevDB Information
CAF, ROM for the Redmi Note 8
Contributors
Adithya R
Source Code: [url]https://github.com/caf-ginkgo/kernel_msm-4.14[/URL]
ROM OS Version: Android 11
ROM Kernel: Linux 4.x
ROM Firmware Required: Latest Android 10 firmware - MANDATORY
Version Information
Status: Stable
Created 2020-10-26
Changelog
Code:
caf-qssi_ginkgo-11.0-20201026
- Initial release
caf-qssi_ginkgo-11.0-20201104
- Merged november 2020 security patch
- Updated CAF system version to LA.QSSI.11.0.r1-07000-qssi.0
- Fixed reboots at bootanim
- Fixed broken sensors (eg. magnetometer)
- Added exfat sdcard support
- Improved notch cutout to be smooth like MIUI
- Improved UI performance
- Improved bootup speed
- Fixed issues with audio (crackling noise etc.)
- Fixed fingerprint access to external apps and in setup wizard
- Switched to stock thermal engine
- Updated device blobs from MIUI global stable
- Force HAL1 camera for some social media apps
- Improved memory management (scudo/lmkd)
- Fixed fingerprint sensor issues in FPC variants
- Added double tap to sleep on lockscreen
- Added permissions hub (privacy indicators)
- Removed emergency icon from lockscreen
- Other misc fixes and improvements
FAQs
Q: Is MiuiCamera included?
A: No, the MiuiCamera from android 10 doesn't work in 11, so a fresh port from Mi A3 is required whenever android 11 is released for it.
Q: What's the 4 or 5 number beside the wifi icon?
A: It's a CAF feature which shows the 802.11 generation number. 4 stands for 802.11n, 5 stands for AC, 6 for AX and so on.
Q: Does the main rear camera have yellow tint? This bug was there in AOSP 11.
A: No, it has been fixed.
Q: How to get weather in at a glance widget? It just shows me the date
A: There's a quite simple trick for this, just add another instance of at a glance widget manually onto another home screen. The one on the main home screen gets refreshed automatically!
Q: This ROM is laggy! Expected more since its CAF.
A: Most importantly, let the ROM settle after its booted, janks will eventually disappear. In my testing I've faced no lags at all except in the first 10 mins after booting. Do keep in mind that this is an initial A11 release, both from CAF and my side. The kernel used (QSv2) is also in its early stages as it's entirely rebased on android 11 kernel source.
Q: Next update when? ETA PL0X
A: Updates will be dropped as soon as CAF releases a new android 11 tag for our chipset (trinket) or when there's a new security patch available. Please do not spam XDA or telegram for ETAs.
Rom screenshots?
sunset_ms said:
Rom screenshots?
Click to expand...
Click to collapse
It's literally written in the 1st post, use your eyes.
Sir big fan. Thanks for the hard work bro
It's finally here!
stuck on google logo for like 5 Minutes. Is it normal?
pinkman420 said:
stuck on google logo for like 5 Minutes. Is it normal?
Click to expand...
Click to collapse
Have you updated the firmware?
Are the Aux Cams are working? Incl.48MPX?
Thanks for the Hard Work
Thanks for this! Works very good by just following your simple instructions!
I have a question: how can I enable bubble notifications / chats like you've done on the screenshots? Again, thanks a lot for bringing Android 11 to Redmi users!
ku0l
every time i reboot, it's loops 4 times which gives me anxieties... i thought the loops only at first initialization but it stays whenever i tried rebooting, thankfully its always boot to system but the loops really smh, rebooting on this rom is quite an experience
i installed that magiskR, is this the cause?
edit: clean installed once again but flash dfe after install rom and magisk at next reboot
NO BOOTLOOPS and boot very fast, rom is smooth no lag and battery usage is better than caf q (reloaded)
nneko904 said:
every time i reboot, it's loops 4 times which gives me anxieties... i thought the loops only at first initialization but it stays whenever i tried rebooting, thankfully its always boot to system but the loops really smh, rebooting on this rom is quite an experience
i installed that magiskR, is this the cause?
Click to expand...
Click to collapse
Did u format data and update firmware? For me rom works good, without magisk btw.
nemanjsb said:
Did u format data and update firmware? For me rom works good, without magisk btw.
Click to expand...
Click to collapse
you can't boot without format data, so how do i? also i use stable firmware Q
rom works good for me too, just the problem is when i rebooting it loops albeit it go system everytime it still took long time
Big fan of your work, thanks for another amazing ROM
Edit: I'm also having the reboot problems reported by @nneko904 (although they don't bother me). Also, File Transfer is not working when in system, only in recovery
Edit2: updated Magisk to v21 and Manager to 8.0.2 and seems like reboots are gone. Procedure is as follows:
- Install MagiskR.zip as described in initial post
- Boot to System, go into Magisk Manager
- Setings > Change Update Channel to "Beta"
- Update Magisk Manager via Magisk Manager's initial page
- Reboot
- Go into Magisk Manager and update Magisk. Don't use Recovery Mode, and choose Direct Install. Wait for it to finish and reboot.
CheepPlüm said:
Are the Aux Cams are working? Incl.48MPX?
Thanks for the Hard Work
Click to expand...
Click to collapse
All the auxiliary cameras are working, use trcam to use them all at one place.
---------- Post added at 03:59 AM ---------- Previous post was at 03:54 AM ----------
DarkLey said:
Big fan of your work, thanks for another amazing ROM
Edit: I'm also having the reboot problems reported by @nneko904 (although they don't bother me). Also, File Transfer is not working when in system, only in recovery
Edit2: updated Magisk to v21 and Manager to 8.0.2 and seems like reboots are gone. Procedure is as follows:
- Install MagiskR.zip as described in initial post
- Boot to System, go into Magisk Manager
- Setings > Change Update Channel to "Beta"
- Update Magisk Manager via Magisk Manager's initial page
- Reboot
- Go into Magisk Manager and update Magisk. Don't use Recovery Mode, and choose Direct Install. Wait for it to finish and reboot.
Click to expand...
Click to collapse
To fix Redmi note 8 MTP not detected (caf Android11) This fix is for Windows users who doesn't see any MTP devices on their My Computer
1. Plug In your Device
2. Click Start and Search for Device Manager.
3. Search for Android Devices/ADB(Usually at the top of the devices)
4. Uninstall Any ADB drivers installed.
5. Re-insert your phone after uninstall
[Fix Credits - http://t.me/tokatsu ]
whyredFire said:
All the auxiliary cameras are working, use trcam to use them all at one place.
Click to expand...
Click to collapse
Where can I get trcam? Pls give link of working trcam.
Always on Display
How to turn off AOD on this rom? AOD draining so much battery on my device:crying:
Is there any ways to enable encryption?
hi, thanks for your works
my question, is signature spoof is supported?
---------- Post added at 05:20 AM ---------- Previous post was at 05:20 AM ----------
hi, thanks for your works
my question, is signature spoof is supported?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
#include <std_disclaimer.h>
/*
* Your warranty is void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Now that I'm done saving my butt, let's proceed
Potato Open Sauce Project is a butter smooth Android aftermarket firmware.
We handpicked the best features around and are adding our own sauce to it.
Get ready to taste the unique features it brings with itself.
We aim to deliver an experience with original ideas and features along with the useful things
the community is accustomed to.
Team Potato
@Agent_fabulous
@ZerNico
@raj_jdja
@ShreyanshLodha
@ATechnoHazard
@HrX
Design:
@McAwesomePL
Valvze
Joshua Baldassarre
Got an issue or suggestion?
Join the Telegram support group for daisy which can be found here
- Custom RGB/HSL/HSV accent picker for dark/light themes
- Custom volume panels
- Three mode Notch Handler (Notch-City)
- Icon shapes and icon pack support
- Lockscreen media art and media art blur level
- Permission hub
- Signature spoofing
- QS panel tweaks
- Various custom QS tiles
- Custom clocks
- Brightness slider tweaks
- Doubletap/longpress power to toggle Flashlight
- Double tap to sleep on lockscreen
- Per app network isolation option
- Google feed integration in launcher
- Other miscellaneous tweaks
POSP: PotatoProject
POSP Code Review: Gerrit Code Review
Device Tree: Tree
Vendor Tree: Vendor
Kernel source: Kernel
Clean Install
- Backup all your data (Important)
- Flash Stock 11.04.0 (If you haven't done so already)
- Boot to TWRP
- Format data
- Install ROM
- Install TWRP Installer (.zip file)
- Reboot to recovery
- Install Gapps (optional)
- Install Magisk (optional)
- Format data
- Reboot to system
Updates
Dirty flash:
- Reboot to TWRP
- Install ROM
- Reboot to recovery
- Reboot!
(Gapps, Magisk and TWRP will be preserved automatically)
OTA Update through the Updater app:
- Go to Settings > System > Updater
- Click "Check for updates" if the update has not shown up
- Tap "Download"
- Select "Install"
- Once the process is done, click "Reboot" and you should be good to go
ROM: (Link 1) GitHub Releases (Link 2) Google Drive
TWRP: Link (Click the assets button from the latest release and download the two first files)
Credits
- Google for AOSP
- Team Potato
- LineageOS
- ArrowOS
- OmniROM
- AOSiP
- And everyone else who helped out!
Reserved
Reserved
Is this build compatible with WPA2-Enterprise WiFi?
O SAPHIA said:
Is this build compatible with WPA2-Enterprise WiFi?
Click to expand...
Click to collapse
I haven't tested that specifically but it should be. Let me know if you test it.
LinkBoi said:
I haven't tested that specifically but it should be. Let me know if you test it.
Click to expand...
Click to collapse
I will download it and test it in an hour. I will tell you when it doesn't work/requires me to do a lot of trickery. Thank you.
It says that the .zip file is corrupt; I am using the newest TWRP that was linked by you.
O SAPHIA said:
It says that the .zip file is corrupt; I am using the newest TWRP that was linked by you.
Click to expand...
Click to collapse
Download again, it's probably a corrupted download.
LinkBoi said:
Download again, it's probably a corrupted download.
Click to expand...
Click to collapse
I honestly doubt that, but alright.
O SAPHIA said:
I honestly doubt that, but alright.
Click to expand...
Click to collapse
Nevermind, it's flashing now.
I really hope that WPA2-Enterprise works without needing this weird certificate thing, otherwise I have to stick with Android 10 ROMs
EDIT: The ROM works, but WPA2-Enterprise doesn't; it requires root certificates.
O SAPHIA said:
Nevermind, it's flashing now.
I really hope that WPA2-Enterprise works without needing this weird certificate thing, otherwise I have to stick with Android 10 ROMs
EDIT: The ROM works, but WPA2-Enterprise doesn't; it requires root certificates.
Click to expand...
Click to collapse
Can you elaborate a bit on the topic?
LinkBoi said:
Can you elaborate a bit on the topic?
Click to expand...
Click to collapse
Android 11 seems to have WPA2-Enterprise networks locked up behind some security factors. Here:
PSA: Android 11 will no longer let you insecurely connect to enterprise WiFi networks
The Android 11 update will break connecting to certain enterprise WiFi networks. Here's why and what you can do to fix it.
www.xda-developers.com
Potato Successfully backed..
Bug..
- Navigation tuner can't saving my choice
When reboot this is back to default setting
fries.apk [ backup & restore not work]
-translate
-need to write build.prop system
persist.camera.HAL3.enabled=1
persist.vendor.camera.HAL3.enabled=1
to activate HAL3 [xiaomiPart.apk Not showing!!]
Gcam7 Nikita not work -code.aurora
Gcam 8 nikita work-com.android.en
Battery is good performance.
Nice Potatoes
Coffeemi said:
Potato Successfully backed..
Bug..
- Navigation tuner can't saving my choice
When reboot this is back to default setting
fries.apk [ backup & restore not work]
-translate
-need to write build.prop system
persist.camera.HAL3.enabled=1
persist.vendor.camera.HAL3.enabled=1
to activate HAL3 [xiaomiPart.apk Not showing!!]
Gcam7 Nikita not work -code.aurora
Gcam 8 nikita work-com.android.en
Battery is good performance.
Nice Potatoes
Click to expand...
Click to collapse
The Hal switch/Xiaomi Parts has be removed in purpose since its code isn't great and doesn't really fix the issue with the camera blobs. You can use a script from GitHub, if you wanna enable/disable cam2api on demand: https://github.com/FrosT2k5/cam2api
LinkBoi said:
The Hal switch/Xiaomi Parts has be removed in purpose since its code isn't great and doesn't really fix the issue with the camera blobs. You can use a script from GitHub, if you wanna enable/disable cam2api on demand: https://github.com/FrosT2k5/cam2api
Click to expand...
Click to collapse
Nice ..
Thanks to share it..
First to know it
Like a Linux ~$ sudo -i
New update for POSP for the July security patch
Changelog:
- Rebased to Sakura's PE device tree
- Fixed the remaining fingerprint issues
- Upgraded Bluetooth stack to Sunfish
- Fixed aptX bluetooth codecs
- Fixed some delay when rendering video thumbnails
- Downgraded some blobs and HALs to Q
- Permanently disabled CDS (with a blob patch) to fix green camera artifacts in some low-light scenarios
- Fixed some call recording issues (at least for me)
- Fixed some audio issues in Treble
- More misc changes
Bugs:
- Flashlight is dead in some apps when Camera2API is enabled (Same as last build)
Download: https://drive.google.com/file/d/1-4QIZBzF-mqwuZNWH0ap_UWv69Qv5UYd/view?usp=sharing
Thanks for the support and sorry for the delay
Hi, in the installation steps, do i have to change slots before rebooting to recovery after installing ROM (and TWRP if clean install)?
gsom9000 said:
Hi, in the installation steps, do i have to change slots before rebooting to recovery after installing ROM (and TWRP if clean install)?
Click to expand...
Click to collapse
This is handled automatically
O SAPHIA said:
Android 11 seems to have WPA2-Enterprise networks locked up behind some security factors. Here:
PSA: Android 11 will no longer let you insecurely connect to enterprise WiFi networks
The Android 11 update will break connecting to certain enterprise WiFi networks. Here's why and what you can do to fix it.
www.xda-developers.com
Click to expand...
Click to collapse
About that, you can try again. I tried to remove that lock
@LinkBoi I was looking into your work on GitHub and saw some bigger looking adaptions regarding media - so far every rom I tried had mic issues when using the speaker. Do you think this might / could be fixed?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
#DroidOnTime
ROM Version: 5.2.1
Devices: beyondlte (beyond0lte, beyond1lte, beyond2lte, beyondx), d1, d2s, d2x
(S10 series and Note 10 series)
Maintainer: bertino
Build Status: UNOFFICIAL
This ROM is built using the official LineageOS trees, and brings a couple extra features:
FBE (encryption for the /data partition) - this means NO SUPPORT FOR TWRP - ONLY LINEAGE RECOVERY IS SUPPORTED!
Working bluetooth calls
OTA
Built in patched camera libs (libexynoscamera3.so) for RAW support in GCam (I recommend BSG GCam)
Signature spoofing (microG support)
Known issues:
5G connectivity (for d2x/beyondx) (? needs testing)
VoLTE/VoWiFi - not working for most Samsung devices, so no fix in the near future
Code:
* Your warranty is now void.
* We are not responsible for anything that may happen to your phone by installing any custom ROMs and/or kernels.
* You do it at your own risk and take the responsibility upon yourself and you are not to blame us or XDA and its respected developers.
This is a user-friendly thread, all your suggestions are important to us and will be taken into consideration..
dotOS is an Android ROM which focuses on performance and stability. We focus on making our ROM look and feel great without struggling with performance and battery! So that one can get most out of their device.....
The same instructions as for installing official LineageOS apply, so the ones found here.
If you want to update your firmware, use the guide provided by Linux4 here (click on your device, then firmware update).
As I said before, due to encryption being enabled, you CAN NOT INSTALL this ROM using TWRP.
You need to use the OFFICIAL Lineage recovery (link in downloads section)
Simple instructions for installing recovery (if you already unlocked your bootloader):Odin:
Rename the downloaded .img to recovery.img and add it to a .tar archive using, for example, 7Zip
Flash the resulting .tar file in Odin
Heimdall:
(Windows): Shift+Right click in the folder where you downloaded the img, then click Open PowerShell/cmd window here.
Run heimdall flash --RECOVERY <name_of_recovery>.img
(Linux/Mac): open a terminal, navigate to the downloaded image, and run the same command.
After installing lineage recovery, all you need to do is factory reset, flash the ROM, GApps and Lygisk/Magisk (if you need them of course - either via ADB sideload, or off of an external SD card, or off of a USB stick attached through USB OTG)
For root I recommend using Lygisk Canary (link in downloads section) instead of Magisk, as Lygisk fixes addon.d for devices/ROMs using FBE (like this one), so OTA update works as intended.
Update instructions:Use OTA or just flash the update in recovery.
All releases can be found in here, just look for the latest one coresponding to your device.
GApps: opengapps
Root/Magisk: Lygisk, (use canary), or, if you don't care about OTA, you could just use Magisk
Lineage Recovery: download here. (search your device and then download lineage_recovery img and flash using heimdall)
Spoiler
New and refreshed UI
New Customization app (previous named DotExtras)
Accent Overlay & RGB Picker
Edge Lightning
Battery Styles
Battery Percentage Styles
Clock Customization
Traffic Indicator
Battery Light Customizations
QS Tiles title toggle
QS Tiles style toggle (AOSP & accent)
QS Rows & Columns Customization
New FOD Icon & Animation picker with previews
FOD recognition color picker
Screen-Off FOD
Automatically temporary disable night light while using FOD (toggle)
New Theme Manager
Overlays based Accent Picker
Material Palette Accent Picker
Smart Accent Picker (find automatically proper shade of accent for the other theme; if you apply custom accent for dark theme, press Smart Accent Picker and it will find a good shade to use for light theme and vice-versa)
Fonts, Icon Packs and Icon Shapes picker
Other Extra Features
Hold power to torch
Double tap on statusbar and lockscreen to sleep
Double tap while sleeping to open doze (ambient display)
Quick Screenshot (3 fingers gesture)
Volume Panel position switch (right or left)
Navigation bar pill size customization (hide, stock, medium, large)
Pocket Mode - avoid scree touches while the phone is in your pocket
Lockscreen Media toggle
Built-in Launcher Grid control
DotOS teamAOSPPixel ExperienceDirty Unicorns
And all other open source Devs/Teams.
Huge thanks to Linux4 for his open source device trees, and for his continued support helping me get this rom working as it is.Also, big thanks to all the people who helped me building my first rom.
Mohan CM - Founder/Core Developer
Sam Grande - UI Developer/Project Co-ordinator
Iacob Ionuț - UI, UX Developer/ Core Developer
Sipun Kumar - Developer/Maintainer
Shreehari Vaasistha L - Developer/Maintainer
Special thanks:Aswin - Graphics Designer
ShreeJoy - Web Backend Developer
Manish Bajpai - Web Frontend Developer Important Links
Liked The ROM? Want to Help Us? Then gift us some credits
dot OS source
DotOS Telegram groupDotOS Telegram channelMy personal Telegram (for support)Device specific Telegram group
WebsiteREPORTING BUGS!As soon as the problem occurs, take a logcat!for more READ THISand do not forget to send it to us
XDA DevDB Information DotOS, ROM for Samsung Galaxy S10 series
Contributors: bertino, linux4Kernel Source: https://github.com/LineageOS/android_kernel_samsung_exynos9820
Device Tree: https://github.com/bertin0/local_manifests
ROM OS Version: 11 Android R
ROM Kernel: 4.14.245
ROM Firmware Required: Any Q or R based firmware, but latest R is recommended
Based On: AOSP
Changelogs:
Spoiler
5.2.1 build 20211124:
November security patch
Fixed USB mode selection from notification
5.2 build 20211009:
Oct security patch
Fixed safetynet for oct security patch
Added Wireless Powershare to quick settings
Added FastCharging toggle to battery settings
5.2 build 20211006:
Fixed blur
Fixed some selinux denials
Version InformationStatus: Beta
Current Version: v5.2.1
Stable Release Date: 27-09-2021
any simple guide how to flash using odin ? please
th3maker said:
any simple guide how to flash using odin ? please
Click to expand...
Click to collapse
I'll add simpler instructions to OP tomorrow, but if you'll look at the guide I linked it says the following for installing Lineage recovery:
If using Odin rename the lineage recovery image for your model to recovery.img and add it to a .tar archive using e.g 7zip.
then flash it in odin.
Once you have lineage recovery, just do a factory reset (deletes internal storage too) and flash the rom, gapps, and magisk/lygisk in lineage recovery.
Builds are up for the whole S10 series!
Hi, fingerprint not working for me on beyondx
mickyarams21 said:
Hi, fingerprint not working for me on beyondx
Click to expand...
Click to collapse
Whoops, sorry, will upload a fix soon.
bertino said:
Whoops, sorry, will upload a fix soon.
Click to expand...
Click to collapse
Cool
mickyarams21 said:
Cool
Click to expand...
Click to collapse
Done, could you please check your OTA? I'd like that to be tested too
bertino said:
Done, could you please check your OTA? I'd like that to be tested too
Click to expand...
Click to collapse
Ota works perfect and fingerprint is working now. Many thank.
Just a quick question, is 5g supported? Because mobile data only shows 4g.
mickyarams21 said:
Ota works perfect and fingerprint is working now. Many thank.
Just a quick question, is 5g supported? Because mobile data only shows 4g.
Click to expand...
Click to collapse
Not sure, i think you are the first person with a beyondx which actually uses 5g. Could you please join the telegram group? https://t.me/exynos9820oss.
Also, does it work for you on the official lineage os?
bertino said:
Not sure, i think you are the first person with a beyondx which actually uses 5g. Could you please join the telegram group? https://t.me/exynos9820oss.
Also, does it work for you on the official lineage os?
Click to expand...
Click to collapse
I'm in your telegram group. 5g doesn't work on the official lineage 18.1, but it worked on my previous Samsung based ROM I.e VN ROM.
mickyarams21 said:
I'm in your telegram group. 5g doesn't work on the official lineage 18.1, but it worked on my previous Samsung based ROM I.e VN ROM.
Click to expand...
Click to collapse
ok, can you ask there and post a logcat? I think linux4 will fix it for official lineage, and then it would be fixed here too.
bertino said:
ok, can you ask there and post a logcat? I think linux4 will fix it for official lineage, and then it would be fixed here too.
Click to expand...
Click to collapse
ok, I'll do that. Thanks for your help!!
Very nice and smooth OS! Thanks mate! One question, is fast charging available? I need 3,5h to charge the phone to 100% even with a fast charger
I really love this rom but the encryption is a problem for me. The fact that i cannot use twrp to flash this rom and keep my data on my phone is whats stopping me from installing. For the main fact that lineage recovery wipes your storage when wiping the phone. I have too much data to be copying back and forth. It just takes too long. If this rom could have been installed using twrp with encryption disabled, this would have easily been my daily driver and im sure there are lots of people who thinks the same.
Bugz1 said:
I really love this rom but the encryption is a problem for me. The fact that i cannot use twrp to flash this rom and keep my data on my phone is whats stopping me from installing. For the main fact that lineage recovery wipes your storage when wiping the phone. I have too much data to be copying back and forth. It just takes too long. If this rom could have been installed using twrp with encryption disabled, this would have easily been my daily driver and im sure there are lots of people who thinks the same.
Click to expand...
Click to collapse
well you only have to do that once (and probably when dotos based on A12 comes out), and then just OTA/dirty flash. Or, you know, you could just use the other dotos available lmao.
Yoshimixu said:
Very nice and smooth OS! Thanks mate! One question, is fast charging available? I need 3,5h to charge the phone to 100% even with a fast charger
Click to expand...
Click to collapse
Hm not sure, fast charging seems to work for me. Will check again using an older build tonight tho.
bertino said:
Hm not sure, fast charging seems to work for me. Will check again using an older build tonight tho.
Click to expand...
Click to collapse
I tried several Chargers and kables. No changes. Still charging too slow
Hello, id love to try dot os on my s10 5g and i am the kind of user who settles. Not a fan of flashing and reconfiguring again and again , just wanted to know if you have plans on releasing an official version of dot os?
Wow....Amazing ROM....I missed wireless powershare. Is it inside any option?
Thanks for this ROM!!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
About PixelOS
PixelOS is an AOSP based ROM, with Google apps included and all Pixel goodies. We aim to provide an experience similar to Google Pixel phones with numerous performance enhancements and a small amount of useful additional features.
Code:
/* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Our feature list
Device Specific Issues
Let me know (with logs)
Requirements
Latest MIUI 14 firmware for Redmi K40S/POCO F4 (download below)
Downloads
Get the latest PixelOS Build for munch (changelogs included): Download here
Firmware: https://xiaomifirmwareupdater.com/firmware/munch
Magisk (optional): https://github.com/topjohnwu/Magisk/releases
PixelOS Recovery (boot, vendor_boot & dtbo): https://sourceforge.net/projects/pixelos-releases/files/thirteen/munch/recovery
Note: GApps are included, don't flash separatelyNotes
• Encryption is enabled by default
• SELinux is Enforcing
• Ships with Hoshiyomi kernel
• Firmware not included by default
PixelOS Recovery is recommended as it has the best support for this ROM
Flashing Instructions:
With PixelOS Recovery:
1 - Reboot your phone to fastboot mode
2 - On fastboot, flash the recovery & dtbo using
Code:
fastboot flash boot boot.img
fastboot flash dtbo dtbo.img
fastboot flash vendor_boot vendor_boot.img
3 - Reboot to recovery using fastboot reboot, then hold Power + Vol Up
4 - Put ROM package into your platform-tools folder
5 - On recovery, go to Factory reset, select Wipe data/factory reset & confirm
6 - Go to Apply Update > Apply from ADB to get into ADB sideload & flash the ROM package using
Code:
adb sideload <rom_name>.zip
7 (EXTRA, not required if you already have the required firmware on your phone) - Use the same ADB sideload method above to flash the FW (required in the Notes or Post or on XDA)
8 - Reboot & enjoy
Alternate way:
1 - Make sure to have ROM package in ur phone
2 - Boot to TWRP
3 - Wipe Data, Cache, Metadata & Dalvik
4 - Flash the FW (required in the Notes or Post or on XDA, if you already have the required firmware on your phone then no need), then flash the ROM (if you want to keep the custom recovery, tick the reflash TWRP/OFOX option before flashing, else you will NOT BE ABLE TO go into other custom recovery in anyway)
5 - Reboot recovery, Format Data, then Reboot & enjoy
To update (please carefully read what steps to do):
+ PixelOS recovery: Reboot to recovery, then do step 4, 6, 7 (if there is a new fw update) then 8.
+ Alternate way: Do step 2 & 4, wipe Dalvik (recommended) then reboot
Join our Telegram Group: https://t.me/PixelOSChat
Buy me a Coffee: https://paypal.me/dreamfan92
Source Code
PixelOS: https://github.com/PixelOS-AOSP
Device Tree and Vendor Tree: https://github.com/PixelOS-Devices
Kernel Tree: https://github.com/masarou-device-garage/android_kernel_xiaomi_munch
ROM OS Version: Android 13.
ROM Kernel: Linux 4.19.261
Stable Release Date: 21-Oct-2022
Latest Release Date: 10-May-2023
Thank you so much have been waiting for this rom. I had some questions
Fast charging at 67 watts?
Battery life?
Also I like the haptics on this phone will I lose it if I switch to a custom rom?
Pixelsimp said:
Thank you so much have been waiting for this rom. I had some questions
Fast charging at 67 watts?
Battery life?
Also I like the haptics on this phone will I lose it if I switch to a custom rom?
Click to expand...
Click to collapse
As what I check, the maximum charging watt here is 45W
Battery life is fairly good
And Haptics is still there, but I didn't update the latest QTI effects configuration. They will be imported in the next update
Here are some screenshots in case if you all wonder how it looks like.
Have a look
Can I display the contact's notes in the call interface
Antutu score is on the lower side any reason for this?
Will this be fixed in the upcoming updates?
Pixelsimp said:
Antutu score is on the lower side any reason for this?
Will this be fixed in the upcoming updates?
Click to expand...
Click to collapse
But antutu test prevent you from using phone?
wtu123 said:
Can I display the contact's notes in the call interface
Click to expand...
Click to collapse
U can't do that with Google Dialer
Pixelsimp said:
Antutu score is on the lower side any reason for this?
Will this be fixed in the upcoming updates?
Click to expand...
Click to collapse
What is the important thing about antutu score? what does it matter to ur everyday experience?
If u really want to use a custom ROM because of antutu score, then better move to other ROM that has high 886969 antutu score to u
<masarou92> said:
U can't do that with Google Dialer
Click to expand...
Click to collapse
thanks
<masarou92> said:
What is the important thing about antutu score? what does it matter to ur everyday experience?
If u really want to use a custom ROM because of antutu score, then better move to other ROM that has high 886969 antutu score to u
Click to expand...
Click to collapse
No offense, it's just that I like to game on this phone and a drop of 20000 points seems substantial enough to indicate a performance hit.
Pixelsimp said:
No offense, it's just that I like to game on this phone and a drop of 20000 points seems substantial enough to indicate a performance hit.
Click to expand...
Click to collapse
Why not flash another ROM...
<masarou92> said:
PixelOS is an AOSP based ROM, with Google apps included and all Pixel goodies (launcher, wallpapers, themed icons, Google Sans fonts, Monet color based system wide theming, boot animation), a fork of OG Pixel Experience with improvements on the top of it. Huge respect to Pixel Experience team for their work, thanks to them for making this ROM possible.
In short a fully functional Pixel Experience with just the right amount of essentials.
Code:
/* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Full feature list
Device Specific Issues
Let me know (with logs)
Requirements
Latest firmware for Redmi K40S/POCO F4 (download below)
Downloads
Get the latest PixelOS Build for munch: Download
Firmware: https://xiaomifirmwareupdater.com/firmware/munch
Magisk (optional): https://github.com/topjohnwu/Magisk/releases
OrangeFox Recovery: https://orangefox.download/device/munch
Note: GApps are included, don't flash separately.
Notes
• Encryption is enabled by default
• SELinux is Enforcing
• IMMENSITY-X Kernel Included (credit to @UtsavTheGreat )
Changelogs:
PixelOS for munch changelogs
madmax7896 for ArrowOS device & vendor tree UtsavTheCunt for kernel
telegra.ph
PixelOS Recovery & OrangeFox Recovery are recommended as they have good encryption support for any Android 12.1/13 ROMs.
Flashing Instructions
Clean flash (coming from MIUI or a different ROM):
• Download ROM from the link above
• Download Magisk v23.0 or newer (optionally)
• Reboot to recovery
• Format data
• Wipe cache, dalvik, data
• Flash ROM zip
• Reboot and voila!
• To get root access, reboot to recovery after ROM setup and flash magisk.
Updating to a newer build (dirty flash):
• Flash ROM zip and magisk (optional)
• Wipe cache and dalvik (optional, recommended)
• Reboot and voila!
Join our Telegram Group https://t.me/PixelOSChat
Buy me a Coffee https://paypal.me/dreamfan92
Source Code
PixelOS: http://github.com/PixelOS-Pixelish
Device Tree and Vendor Tree: https://github.com/PixelOS-Devices
Kernel Tree: https://github.com/itsurboimasarou/kernel_xiaomi_sm8250-new
ROM OS Version: Android 13.
ROM Kernel: Linux 4.19.261
Stable Release Date: 21-Oct-2022
Latest Release Date: 29-Oct-2022
Click to expand...
Click to collapse
Problem:- Extra Dim Toggled To Coz Soft Reboot..From QS Panel Or From The Setting Also. Fix Dis Soon.
Problem:- Extra Dim Toggled To Coz Soft Reboot..From QS Panel Or From The Setting Also. Fix Dis Soon.
Pixelsimp said:
No offense, it's just that I like to game on this phone and a drop of 20000 points seems substantial enough to indicate a performance hit.
Click to expand...
Click to collapse
you're talking nonsense
marcobuu said:
you're talking nonsense
Click to expand...
Click to collapse
You get around 540000 in this rom while on stock it is around 700000.
I understand that this is a hobby for you guys and we not entitled to get anything, I am just stating maybe this is not a rom for gamers.
Waited for this ROM to unlock my POCO F4 because of Pixel Rom on my mothers Note 10 pro was perfect. Every things working and stable on POCO f4 for now. Battery drain is high though. Without AOD it is little better but i want to use AOD.
Is there anyway this gets the kind of battery Mi 11x got? I mean I dont mind a hit to performance either.
tinted said:
Waited for this ROM to unlock my POCO F4 because of Pixel Rom on my mothers Note 10 pro was perfect. Every things working and stable on POCO f4 for now. Battery drain is high though. Without AOD it is little better but i want to use AOD.
Is there anyway this gets the kind of battery Mi 11x got? I mean I dont mind a hit to performance either.
Click to expand...
Click to collapse
What's the SOT?
And what about fast charging? 67 watts?
Pixelsimp said:
What's the SOT?
And what about fast charging? 67 watts?
Click to expand...
Click to collapse
In latest Run got 3hrs SOT with AOD off, will attach the screenshots.
Also, tested charging speed, drained it totally so it died and powered ON itself, Not sure if it fast charged while it is dead but in around 30 min it charged 60% and total charging time is around 1hr 10min but overall it is fast enough that I did not feel like i needed faster charging. But GSMArena got 100% in 38min so not 65W charging.
Also, video recording not working in the GCam at 1080p and 4k at both 30 and 60fps It used to work in MIUI though.
QR scanner in lock screen is fine(would prefer camera since there is no decent camera shortcut since this phone power button is fingerprint sensor) but in AOD that icon has too much white color which is distracting.
Another question, Does the display's color accurate profile get ported or not because right now I am using adaptive color profile and rest are all saturated to my eyes.
Dolby vision aside HDR 10+ support is also not present for now in Netflix, only HDR 10.
tinted said:
In latest Run got 3hrs SOT with AOD off, will attach the screenshots.
Also, tested charging speed, drained it totally so it died and powered ON itself, Not sure if it fast charged while it is dead but in around 30 min it charged 60% and total charging time is around 1hr 10min but overall it is fast enough that I did not feel like i needed faster charging. But GSMArena got 100% in 38min so not 65W charging.
Also, video recording not working in the GCam at 1080p and 4k at both 30 and 60fps It used to work in MIUI though.
QR scanner in lock screen is fine(would prefer camera since there is no decent camera shortcut since this phone power button is fingerprint sensor) but in AOD that icon has too much white color which is distracting.
Another question, Does the display's color accurate profile get ported or not because right now I am using adaptive color profile and rest are all saturated to my eyes.
Dolby vision aside HDR 10+ support is also not present for now in Netflix, only HDR 10.
Click to expand...
Click to collapse
1 - There was an issue related to deep sleep test & it was now fixed in the official build
2 - BSG Gcam works very fine for me, did u set Hardware Level to Level 3+? reduce to Level 3 vs 3+ doesn't work
3 - Dolby Vision with HDR10+ won't be supported here due to some very special modification on the actual MIUI that we aren't supposed to do it here as it would heavily affect our system base framework & also some more problems around it