Develop Bugs

Bricked my phone... :(

Hello there I had just unlocked the bootloader yesterday and flashed an Oreo ROM without updating base bands and now my device doesn't boot up it just shows the bootlogo and turns off again in less than a second it doesn't even charge, good thing is I am able to go to edl mode I guess but then when I tried qfil and mi flash to flash stock rom i m getting the sahara cannot detect com port handle error and the system cannot find the file specified error in mi flash please help its just been a week since I got this phone

Solution
Chin_hebbar said:
Hello there I had just unlocked the bootloader yesterday and flashed an Oreo ROM without updating base bands and now my device doesn't boot up it just shows the bootlogo and turns off again in less than a second it doesn't even charge, good thing is I am able to go to edl mode I guess but then when I tried qfil and mi flash to flash stock rom i m getting the sahara cannot detect com port handle error and the system cannot find the file specified error in mi flash please help its just been a week since I got this phone
Click to expand...
Click to collapse
I've used MiFlash Tool, and the problem was fixed. Sahara Error occurs when you take to much time to flash after booting to EDL, you only have few seconds to flash util the port is closed for writing. QFIL takes around 20 to 25 seconds in caching the files so use MiFlash and It'll flash. Best way to do it is:
1. Install and setup MiFlash for flashing.
2. Open MiFlash and select your Firmware's folder.
3. As soon as you connect the phone refresh miflash and hit flash.
If everything goes well you'll flash will be successful else try again.

I tried doing as fast as a could too on mi flash and it would come up as trying to connect to com4 port something in the status and would eventually come back to same error in the picture.

Chin_hebbar said:
I tried doing as fast as a could too on mi flash and it would come up as trying to connect to com4 port something in the status and would eventually come back to same error in the picture.
Click to expand...
Click to collapse
I need to flash Baseband for Oreo. Please guide me

windows 10 problem
Chin_hebbar said:
Hello there I had just unlocked the bootloader yesterday and flashed an Oreo ROM without updating base bands and now my device doesn't boot up it just shows the bootlogo and turns off again in less than a second it doesn't even charge, good thing is I am able to go to edl mode I guess but then when I tried qfil and mi flash to flash stock rom i m getting the sahara cannot detect com port handle error and the system cannot find the file specified error in mi flash please help its just been a week since I got this phone
Click to expand...
Click to collapse
I face this problem in windows 10.
first uninstall zuk drivers and qfill and disable driver signature enforcement (Google it how to do it) then install zuk drivers and qfill use original cable and your phone will get flashed

Balaji Sriram said:
I need to flash Baseband for Oreo. Please guide me
Click to expand...
Click to collapse
Follow the instruction from this post
https://forum.xda-developers.com/lenovo-zuk-z2/how-to/zuk-z2-baseband-flashing-guide-t3715121

Do not listen to anyone telling you to use miflash, only use qfil otherwise you WILL encounter other issues because qfil is the only way to reach the deeper partitions that mi is unable to... Other issues may range from no volte, calling or signal problems etc its just easier to do it right the first time.

Need Help, my mi6 hard brick, no fastboot mode.. set boot partition failed

hello, my mi6 suddenly dead, hard brick, can't enter to fastboot mode. Mi6 6/128 ceramic edition.
so i decided to open back covers and shortlink 2 pins it detect as qualcomm loader in mi flash, but when flashing fastboot rom it always show error " set boot partition 1 failed "
i tried many version of mi flash and use global stable, global dev, china stable, china dev fastboot rom but always ended in set boot partition failed..
i've searching lots of forum but can't found an answer for set boot partition failed error.
i also tried QPST for flashing with fastboot rom but also give error,
please help anyone have same problem with me? or any xiaomi engineer here? i just need how to solve flashing in mi flash with error set boot partition failed.
i hope no need to change/replace the hardware...

You can try to use XiaomiTool and flash your phone with instead.
https://www.xiaomitool.com/V2/
Also, have you tried fastboot boot recovery.img
To see if you can boot TWRP or something?
(fastboot boot might work better than flashing)
I don't have any experience with Miflash, so can't offer any advice on that.
Personally I would try fastboot boot first, since XiaomiTool is in alfa-version.

-Zteam- said:
You can try to use XiaomiTool and flash your phone with instead.
https://www.xiaomitool.com/V2/
Also, have you tried fastboot boot recovery.img
To see if you can boot TWRP or something?
(fastboot boot might work better than flashing)
I don't have any experience with Miflash, so can't offer any advice on that.
Personally I would try fastboot boot first, since XiaomiTool is in alfa-version.
Click to expand...
Click to collapse
thanks for replying.. my phone is dead can't boot to fastboot. only detect in edl mode. i think its problem with my partition being messed up (look from mi flash logs)
anyway i have tried to install xiaomitool v2 but i think it's not compatible yet with unbrick device it show error like this:

zilan said:
thanks for replying.. my phone is dead can't boot to fastboot. only detect in edl mode. i think its problem with my partition being messed up (look from mi flash logs)
anyway i have tried to install xiaomitool v2 but i think it's not compatible yet with unbrick device it show error like this:
Click to expand...
Click to collapse
it seems your Mi6 is alive again how was the solution?

DJ Regino said:
it seems your Mi6 is alive again how was the solution?
Click to expand...
Click to collapse
no , still dead.. :crying:

look into https://stackoverflow.com/questions/39906951/android-edl-mode-commands

zilan said:
thanks for replying.. my phone is dead can't boot to fastboot. only detect in edl mode. i think its problem with my partition being messed up (look from mi flash logs)
anyway i have tried to install xiaomitool v2 but i think it's not compatible yet with unbrick device it show error like this:
Click to expand...
Click to collapse
Sorry for my late reply, I had forgotten to answer this earlier, did you try to perform a regular flash (not bricked option) from XiaomiTool. if that doesn't work either, maybe you should ask the developer of XiaomiTool2 for hints.

Try mipcsuite chiese version, i saved my Mi6 when it showed penguin in the middle of screen, no fastboot nor recovery etc

HTCDevil said:
Try mipcsuite chiese version, i saved my Mi6 when it showed penguin in the middle of screen, no fastboot nor recovery etc
Click to expand...
Click to collapse
do you have a link? and what rom to use?

zilan said:
do you have a link? and what rom to use?
Click to expand...
Click to collapse
Is there any update? Did your phone recovered from that situation?

I am in the same situation with my Asus Rog 2. It has life sign only in edl mode and when I try to recover I ve got that error too "set boot partition failed" still dead.

zenhex said:
I am in the same situation with my Asus Rog 2. It has life sign only in edl mode and when I try to recover I ve got that error too "set boot partition failed" still dead.
Click to expand...
Click to collapse
u fix it?

zilan said:
hello, my mi6 suddenly dead, hard brick, can't enter to fastboot mode. Mi6 6/128 ceramic edition.
so i decided to open back covers and shortlink 2 pins it detect as qualcomm loader in mi flash, but when flashing fastboot rom it always show error " set boot partition 1 failed "
i tried many version of mi flash and use global stable, global dev, china stable, china dev fastboot rom but always ended in set boot partition failed..
i've searching lots of forum but can't found an answer for set boot partition failed error.
i also tried QPST for flashing with fastboot rom but also give error,
please help anyone have same problem with me? or any xiaomi engineer here? i just need how to solve flashing in mi flash with error set boot partition failed.
i hope no need to change/replace the hardware...
Click to expand...
Click to collapse
if you're still there, i resolve this issue.
you need to jump charge your battery using external charger ( external charger jumped wire direct on your battery). maybe for 30mins.
then try again to charge your phone, if it reapond and have display 0% battery, let it charge for atleast 50% then power ON.
If it stucks on logo.. do reflash.

Redmi 5 Plus totaly bricked

Hi there,
I have got a bricked Redmi 5 Plus from my friend.
The phone has locked bootloader.
Firstly, I've read about that I had to turn the phone in EDL mode.
I've launched the redmi phone in EDL mode by test points.
I've tried to flash ROM via miflash, the program gives me an error xml during system.img flash after about 570 seconds.
In only one ROM that I've downloaded I was able to get to the system.img flashing for about ~570 seconds.
On other ROM's the error was at ~26 seconds.
Another option that I've tried was to flash via QPST.
Here, I've got firehose error, or sahara error, depends on which ROM i was trying to flash.
I'm not able to boot or change developer settings.
I can't even get to the MIUI's recovery.
Could someone help me deal with it? Please

I can Help you by logging in my EDL Authorised account. Free just help you

urbanmec said:
I can Help you by logging in my EDL Authorised account. Free just help you
Click to expand...
Click to collapse
Could you give me some contact info please?

Yet another bricked Redmi Note 9 Pro

Hi there,
I recently bricked my Redmi Note 9 Pro trying to reflash the original rom under TWRP. It was a Global version (joyeuse) originally.
It simply is stuck on a bootloop (Redmi logo showing up for 1sec then rebooting) so can't access fastboot or recovery mode.
After many hours of research, I kinda came to the conclusion that there is no way of flashing the rom in EDL mode without an authorized MI account for MI Flash Tool.
I'm still asking though : is there any trick to bypass it or flash the original rom without using an authorized account on a Qualcomm-based device ?
Cheers !

AkilisUi said:
Hi there,
I recently bricked my Redmi Note 9 Pro trying to reflash the original rom under TWRP. It was a Global version (joyeuse) originally.
It simply is stuck on a bootloop (Redmi logo showing up for 1sec then rebooting) so can't access fastboot or recovery mode.
After many hours of research, I kinda came to the conclusion that there is no way of flashing the rom in EDL mode without an authorized MI account for MI Flash Tool.
I'm still asking though : is there any trick to bypass it or flash the original rom without using an authorized account on a Qualcomm-based device ?
Cheers !
Click to expand...
Click to collapse
There's no trick and it cannot be unbrick as of now even mi service center can't flash fw through edl. Your only option are: 1.)Mi Service Center (they'll replace the board it'll cost you $120 USD like you bought a second hand of the same unit). 2.) Sell the parts to make profit and buy a new phone. 3.) Set aside and wait for available unbrick solution. You cannot avail services from indian and russian guys almost all their services are scam. That's all you can do and I can share.

Facing s similar issue. Looking forward to a solution..
I'm able to access both recovery and fastboot. Only issue is that i accidentally locked the bootloader while tinkering with it on mi flash unlock.
Apparently accessing EDL mode is the only way to get past this (based on hours of extensive google research, lol).

As of now I couldn't find any solution.
In my theory it can be unbrick in two methods:
1st method is bypassing authentication (server hack or modified mi flashtool).
2nd method is modified firehose programmer file.
We can use other flashtool programs like (Xiaomi Fire Tool, Chimera, and other paid apps to flash) but we need a modified firehose for that.
If someone else has the solution please help us unbrick our phones. May be we can donate instead of buying from someone else we don't even trust and letting them access our computer that's too risky.
Moreover, I asked xiaomi support, In our case they won't help us for them our bricked phones are trash. We are helpless.
In case someone has time to help patch these files for us. I got these files from latest firmware: (Joyeuse Global). I will donate my money instead of availing service.
Firmware:
joyeuse_global_images_V13.0.1.0.SJZMIXM_20220804.0000.00_12.0_global
Source:
https://c.mi.com/global/miuidownload/detail/guide/global/miuidownload/index

Hello, I have my redmi note 9 pro (joyeuse) working again. After days of deep searching in the web for fix I almost got out of my mind.
If you have no other choice you can pay someone for authorized flash just make sure your phone can enter into edl mode stably. I was very skeptical and have trust issues but my only choice is: give it a try.

AkilisUi said:
Hi there,
I recently bricked my Redmi Note 9 Pro trying to reflash the original rom under TWRP. It was a Global version (joyeuse) originally.
It simply is stuck on a bootloop (Redmi logo showing up for 1sec then rebooting) so can't access fastboot or recovery mode.
After many hours of research, I kinda came to the conclusion that there is no way of flashing the rom in EDL mode without an authorized MI account for MI Flash Tool.
I'm still asking though : is there any trick to bypass it or flash the original rom without using an authorized account on a Qualcomm-based device ?
Cheers !
Click to expand...
Click to collapse
Hi, have you tried holding lower volume button and power button at the same time, that will make the phone go to fastboot mode. After that download XiaomiAdbFastbootTools and open it. It should automatically point you to Fastboot tab. In Fastboot tab under Image: 1. select ROM folder( oh forgot to mention to download FASTBOOT image for your phone's model before this) and for method put clean install and then just click on flash ROM and done.
Good luck from someone who has bricked a phone like you for at least 20 times lmao

Mumi32 said:
Hi, have you tried holding lower volume button and power button at the same time, that will make the phone go to fastboot mode. After that download XiaomiAdbFastbootTools and open it. It should automatically point you to Fastboot tab. In Fastboot tab under Image: 1. select ROM folder( oh forgot to mention to download FASTBOOT image for your phone's model before this) and for method put clean install and then just click on flash ROM and done.
Good luck from someone who has bricked a phone like you for at least 20 times lmao
Click to expand...
Click to collapse
Hey,
My phone is hard bricked, meaning that I don't have access to fastboot or recovery anymore. My only option was getting rid of the back cover, unplug the battery and short-circuit the pins with a pair of tweezers to access edl mode (which I did), then install the original rom with an authorized account (don't have + cannot find) or bypass the authorization or mayber with a modified firehose (I tried to find one, but didn't succeed as mentionned by gfchhhh earlier).
So I my brother gave me a spare phone that will clompetely do (redmi note 10 pro actually) !
Thanks for your time tho !

This happened to me in 2020 when I bought the phone after the release and I tried to install the Curtana ROM on a Joyeuse device, so I bricked the phone by mistake!
Thankfully, I found some shady Telegram group with people that offered EDL service from India (I think...) with official MI Flash tool from authorized service provider (supposedly they were the owners of the account). At first, I was skeptical and I tried different ways to service the phone, but couldn't find any so I delved into the shady realm of a remote service provider.
From my experience, the dude in question that offered the service seemed very rude because he probably didn't speak English very well. I paid him 30€ through PayPal beforehand, which I know it was a risky move. We agreed on a date to fix the phone remotely, but he wasn't punctual and I had to wait a couple of days for him to respond. ‍
He connected via TeamViewer, he asked to download the MI Flash Tool (I don't remember the name fully), and asked me to put the phone in EDL with a paperclip or tweezers. Then I remember him logging in his Mi service account, sending a repair request (i think), and after a couple of minutes, he copied and pasted what looked to be a very long 2FA single use code (two factor authentication) to begin the flashing.
The process took about 30~60 min or so, of which I didn't remove my eyes from the computer at any moment to check if he was going to do pesky things through the remote access. After the long wait, the phone booted and I got my phone working.
I have never again tried to root the phone until today, because I have a severe problem with the audio interface and I need to modify some system files.
Wish me luck!

Bricking of curtana after update is increasing alot

Hi guys I have my redmi note 9s I got miui 13 update I downloaded it rebooted and plugged my phone to charger and after a few hours I saw my phone screen was black nothing works just black I connected it to my PC it's shows 9008 Qualcomm port and I know it is in edl mode tried to flash from mi flash but failed need auth account if someone has a auth account or any trick to unbrick my curtana for free then please help xiaomi service center couldn't fix my phone they say me to buy new note 12 but I don't have money please share any unbrick without auth tricks please

I tried the tool like mi flash pro and others if someone can patch the firehose file for curtana it would help many curtana back to life please