Hello everyone!
You are probably aware that our device, Galaxy A52s 5G, supports the @phhusson Treble Project. This Porject allow our device to boot GSIs (Generic System Images). The problem is that a GSI isn't optimized by default for our device.
Now, imagine that you installed a fresh version of Windows on your computer and doesn't install the best drivers, your GPU will be recognized as a Basic Microsoft GPU and won't work at its best potential. That's a kind of GSI, and we have to configure our fresh Android System to work the most perfectly as possible.
Requirements:
A Treble GSI: Click here for the XDA Guide by @oli231
Patience.
Understanding for a potential dirty English, I'm french.
Make sure that there's in your settings app a section called "Phh Treble Settings"
Probably Root
GSI I recommand:
Ponce's Pe13+ Download
AncientOS 7.0 (13) Download
Fixes:
Fingerprint
Disable lockscreen security
Enable in Phh Treble Settings:
Samsung > "Enable workaround for broken fingerprint" (at the bottom of the list)
Misc > Under-display fp Color > Green
Configure your lock screen security (Pin, Password,Schema) then register your fingeprints
Go back to Phh Treble Settings then Misc and set "Under-display fp Color" to White
Now unlocking your phone should work with fingerprints
Brightness/Backlight
Enable in Phh Treble Settings:
Samsung > "Enable extended brightness range"
Samsung > "Enable extra sensors"
Misc > "Use linear screen brightness slider"
This will make your device brighter when you will be outside
Cameras
What's working: 64MPx, 32MPx front, UW.
Tested on AncientOS and Pe13+ don't know for others
Enable in Phh Treble Settings:
Misc > "Expose Aux cameras"
Misc > "Force Enable Camera2API HAL"
Install this SGCam
Open then close the app
Download this Library then move the .so file to /sdcard/SGCAM/LIB
Download this Config then move the .xml file to /sdcard/SGCAM/XML
Load the new A52s--DarkMetal--SGCam config in your new SGCam
Lenses switch is on the right at the bottom of the camera
Make sure that the thre icons (AWB, HiRes and Shad) are enabled
Bluetooth (Media and Calls)
Turn off bluetotoh
Delete all your Bluetooth devices
Enable in Phh Treble Settings:
Samsung > "Use alternate audio policy"
Samsung > "Enable setero audio mode"
Samsung > Set eSCO transport unit size > Set it to 16
Misc > "Force-disable A2DP offload"
Misc > "System-Wide BT HAL"
Reboot system
Enable Bluetooth
Other fixes
Brighter Flashlight
Samsung > "Set flash strength" > Set it to 3
120Hz
Misc > "Force FPS" > Set it to "[email protected]"
Misc > "FPS Divisor" > Set it to 3
RIL
Misc > Automatic restart RIL > Enable it
This is a compilation of all the research I did and tried, I used AncientOS 7.0 A13
I hope that this will help you for a daily usage.
If you are still facing issues you can recieve help on the A52s Development Telegram group, or ask directly for help on the Project Treble GSI Telegram group
What does RIL mean or do?
RIL is the Radio Interface Layer, it is used for every calls, when you use mobile data, RIL makes interaction between two interfaces.
In the camera app, where do I load the new config? I copied it to the specified location.
i
Darkaos006 said:
Hello everyone!
You are probably aware that our device, Galaxy A52s 5G, supports the @phhusson Treble Project. This Porject allow our device to boot GSIs (Generic System Images). The problem is that a GSI isn't optimized by default for our device.
Now, imagine that you installed a fresh version of Windows on your computer and doesn't install the best drivers, your GPU will be recognized as a Basic Microsoft GPU and won't work at its best potential. That's a kind of GSI, and we have to configure our fresh Android System to work the most perfectly as possible.
Requirements:
A Treble GSI: Click here for the XDA Guide by @oli231
Patience.
Understanding for a potential dirty English, I'm french.
Make sure that there's in your settings app a section called "Phh Treble Settings"
Probably Root
GSI I recommand:
Ponce's Pe13+ Download
AncientOS 7.0 (13) Download
Fixes:
Fingerprint
Disable lockscreen security
Enable in Phh Treble Settings:
Samsung > "Enable workaround for broken fingerprint" (at the bottom of the list)
Misc > Under-display fp Color > Green
Configure your lock screen security (Pin, Password,Schema) then register your fingeprints
Go back to Phh Treble Settings then Misc and set "Under-display fp Color" to White
Now unlocking your phone should work with fingerprints
Brightness/Backlight
Enable in Phh Treble Settings:
Samsung > "Enable extended brightness range"
Samsung > "Enable extra sensors"
Misc > "Use linear screen brightness slider"
This will make your device brighter when you will be outside
Cameras
What's working: 64MPx, 32MPx front, UW.
Tested on AncientOS and Pe13+ don't know for others
Enable in Phh Treble Settings:
Misc > "Expose Aux cameras"
Misc > "Force Enable Camera2API HAL"
Install this SGCam
Open then close the app
Download this Library then move the .so file to /sdcard/SGCAM/LIB
Download this Config then move the .xml file to /sdcard/SGCAM/XML
Load the new A52s--DarkMetal--SGCam config in your new SGCam
Lenses switch is on the right at the bottom of the camera
Make sure that the thre icons (AWB, HiRes and Shad) are enabled
Bluetooth (Media and Calls)
Turn off bluetotoh
Delete all your Bluetooth devices
Enable in Phh Treble Settings:
Samsung > "Use alternate audio policy"
Samsung > "Enable setero audio mode"
Samsung > Set eSCO transport unit size > Set it to 16
Misc > "Force-disable A2DP offload"
Misc > "System-Wide BT HAL"
Reboot system
Enable Bluetooth
Other fixes
Brighter Flashlight
Samsung > "Set flash strength" > Set it to 3
120Hz
Misc > "Force FPS" > Set it to "[email protected]"
Misc > "FPS Divisor" > Set it to 3
RIL
Misc > Automatic restart RIL > Enable it
This is a compilation of all the research I did and tried, I used AncientOS 7.0 A13
I hope that this will help you for a daily usage.
If you are still facing issues you can recieve help on the A52s Development Telegram group, or ask directly for help on the Project Treble GSI Telegram group
Click to expand...
Click to collapse
if possible please provide GSI rom flashing guide for p13+
Related
Q: Why is rom size to large 232mb?
A: Coz Google Apps (Gaaps) are included and some data apps are also included in this rom..
Q: Where are Developer settings / Performance settings?
A: Go to System settings > About phone. Tap Build number 7 times, you will get a message that the development settings are enabled..
Q: Can I use another kernel instead of the one included in the zip?
A1: No. Only use the included kernel for 100% compatibility, bug reports with non-standard kernel will be ignored.
Q: Where can I find the settings for MTP/Mass storage mode?
A: Go to **Settings > Storage > open Options Menu > USB computer connection.
Q: How to force a reboot when the device is unresponsive/stuck?
A: Press home and power button together -> the phone will do a hard reboot. Warning: Use this feature only when necessary, it can cause data corruption because the reboot is forced.
Q: How to set minimum auto brightness values?
A: Settings / Display & lights / Brightness /
select Auto then parameters icon on the right
Brightness adjustment: set to maximum
Check Adjust to sunrise and sunset
Adjustment sensibility: Very high
Then select bottom center Adjust:
Here you have all adjustable levels
sound enhancement not work
sound enhancement not work :-|
is that included arbic & radio
nAOSP ROM 5.1 and 6.0 for Xperia Acro S
The purpose of this rom is to provide a rom not so far of the AOSP with some cool features (nAOSP means "near AOSP").
As I'm using some external works to do this rom, I first want to thanks the community and specially billchen1977,ViPER4Android Team ,Cyanogenmod Team , FXP Team
I have not this device and so @vsergeyev convinced me to do it and he has done all the tests. You can thanks him.
A lot of things (like the flashing procedure) will point on Xperia S thread where I'm active. You can post in Xperia S thread if needed EXCEPT if this is relevant to Acro S (flashing, adoptable/portable external storage etc).
About Adoptable storage on Android 6:
You are free to use portable or adoptable option for your external sdcard. Don't forget that if you answer "Adoptable", the external sdcard will be FORMATTED and will NOT be usable on an other devices. If you want the classical behavior, you will need to select "Portable"
nAOSP 6.0 Marshmallow Changelog (features, issues, etc)
b12
Please read the associated post to don't have issues with Superuser
android-6.0.1_r61 (August security fixes)
Superuser: Bye to Superuser, welcome to Superuser with AppOps
su: Support for multiuser and the new Superuser
Ui: Battery styles (see Settings/nAOSProm/More) - compatible with GravityBox (thanks @millosr)
Ui: Optimizing application displays the application name (thanks @millosr)
ROM Updater : Remove download action from notification
Layers: doze invert color is now automatically set by the theme (manual option removed)
Bluetooth: Accept all incoming files
Settings: Display safe entries into nAOSP section (depends on current user, root access ...),battery styles, substratum, root access control per user
SELinux: add missing nfc and mediaserver rules (+ fix selinux denied ioctl by checking binder fd type: sockets using ashmem accessors)
Boot: check f2fs not run anymore
kernel: bma250: more fix about bma250_ic_write issues when motion (pickup/significant) are in use with accelerometer.
Gapps: /persist/gapps-config.txt
include b11 (unreleased for acroS)
Daydream: supported (see Settings/Display) - disabled by default
Sensors: Significant motion added (Full doze and localization/low power mode support) - disabled by default
Sensors: Pickup sensor implementation reviewed (just a high_g detection on Y axe) - disabled by default
Kernel: accelerometer: merge bma250_ng and bma250_motion drivers to avoid conflict and provide a better hardware managment
Kernel: cpufreq: Fix issues when a cpu goes back online and was clocked to the max frequency of 2.05 Ghz.
Kernel: Color calibration: full support of RGB Multipliers with kcal_ctrl driver implementation.
Kernel: Leds: Store the brightness requested. That permit to better control the requested brightness when thermanager/other changing the max_brightness value.
CPU Hotplug: mpdecision daemon is back (will manage cpu1 online state)
Offline charging: new pictures for chargemon (thanks @Jurn_Software)
Day/night mode: support new kcal_ctrl driver.
Settings: Enable/disable some sensors (pickup, significant motion, ...), Support substratum application
Themes: Full support of Layers 4.0
Dialer/InCall: Automatic spearkerphone (see Dialer/Settings/proximity speakerphone) - disabled by default
Translations: update for uk @Jurn_Software ), fr
include b10 (unreleased for acroS)
android 6.0.1_r46 (June Security patch)
Settings: Double Tap to sleep can be disabled (thanks @millosr)
Quick Settings: Immersive mode (hide NavBar and/or Status Bar). If you dirty flash, you can add it with SystemUI Tuner. (thanks @millosr)
Dialer: Fix "invalid number" issue (based on @runekock feedback. thanks)
include b09_r43 (unreleased for acroS)
Eleven updated
TWRP: 3.0.2+
Previous versions
b09
android 6.0.1_r20 (April Security patch)
kernel: Intermediate security fix of march added
Quick Settings: add Caffeine (thanks @millosr)
ROM Updater: fix a permission issue (thanks @millosr)
b08
android 6.0.1_r17 (March Security patch)
Hw Keys: launch Camera application with Camera key can be configured to Disabled, Long press only or default
Battery: 1910mah
Translation: update pt/pt-rBR @ThunderBolt_BR)
b07
New partition layout with /data and /sdcard merged. please read the flashing procedure.
kernel: Wake Gesture support (double tap, sweep). Touchscreen power managed by proximity sensor when screen off
kernel: governor SMARTMAX by default. OC supported.
Selinux: Fully supported and Enforced
TWRP: (3.0.0 on Android 6) with Support of new partition layout and encryption footer length. /data/media will be preserved and used for backup/restore (recovery.img on the OTA zip file)
TWRP: Add Crypto, Battery status and FOTA backup/restore/install support
WakeUp: Permit to control wake gesture (Settings/nAOSProm/WakeUp)
ViPER4Android: Sound FX managed by ViPER4Android version 2.4.0.1
Email: Patched to bypass Exchange Security Policy (No Pin code etc)
Browser, Music and Gallery2: AOSP version replaced by CyanogenMod version
Dialer: Materialized Icon added
Quick Search: Removed. Be free to use another application like Google Search provided with GApps
GApps: Patch to avoid force close due to permissions (you need to flash the ROM + OpenGapps in one shot and to reboot directly after that)
Double Tap to Sleep on the status bar
Minfree setting supported
Volume Keys can control track (next/previous/stop) when screen off and music is playing
Doze: Support adaptive brightness (Ambient Display)
Notification during Doze: Invert color for dark theme supported (avoid a black text on black background)
Menu/Home Keys: By default press Menu will launch App switcher and long press on Menu will trigger Menu. Long press on Home will launch Search Engine. This is the modern layout but you can use the old one too
Power Key: Include Reboot menu (Normal, Soft, Recovery and Bootloader)
Hw Keys: Use Camera button to launch Camera Application (Short press if screen is off and long press if screen is on)
Quick Setting: Can be pull down directly with one finger on the 1/3 right of the Status bar
Quick Settings: Add Fast Charge, Lockscreen, ADB wifi, Day/Night tiles
Recent Applications : Close all applications button on the right bottom
Settings: nAOSProm section that permit you to configure the ROM, to start WakeUp, Layers Manager, Superuser and SuperSU if available.
Settings: Color Calibration improved to support Night and Day settings. Presets are now available.
Settings: Add About nAOSProm
NavBar: On-screen keys can be enabled/disabled from Settings/nAOSProm/More
Developer mode and Tuner UI enabled by default
Superuser integration
Battery: Menu include the Fast Charge option (Fast charge will be always disabled after a reboot)
KSM: Kernel Same-page merging disabled by default. (See Settings/nAOSProm)
Signature Spoofing: Permit an application to fake his signature mainly for Microg/NoGapps (disable by default)
Adaptive Brightness: Speed up transition when you go to a brighter environment (~1.5s).
Busybox include
NFC: supported
USB OTG support (thanks @Phantasm4489)
GSM: 2G/3G switch fixed
Xposed : Supported with Selinux enforcing
Auto Power Mode : Doze and applications standby enabled by default (see Settings/nAOSProm)
Localisation: support GPS/Wifi/GSM fix with Google GMS
init rc: complete rework of init process to simplify it (remove some scripts and unused services)
Bluetooth 3.0 Headset: Seems to support HFP and A2DP profiles (thanks to report with your model)
Google Now on Tap : Support with Long press on Home
OTA: support with ROM Updater (see Settings/About phone/Updates)
OTA: Recovery: OTA will automatically flash recovery.img into FOTA
OTA: Layers: OTA will preserve theme files when flashing a new ROM
SuperSU: force system installation with the new stable version 2.65 (/system/.supersu). Can be overrided by /data/.supersu
Fix offline charging
Fix FM Radio and Bluetooth crash when FMRadio is closed without headphone.
Fix DeskClock crash when trying to view world cities
Translation: en, fr, es (@vayavalla), pt-rBR @ThunderBolt_BR), uk @Jurn_Software), it @nicofossa), pl @A6ekAK), sr @millosr)). Thanks Guys for your help
Partition Layout: /data and /sdcard merged. F2FS is the only filesystem supported for /cache and /data now
nAOSP 5.1 Lollipop Changelog (features, issues, etc)
b29
New partition layout with /data and /sdcard merged. please read the flashing procedure.
see 6.0 b07 changelog that is pretty similar for b29 (except specific Android 6 stuffs and some features like lockscreen/ADB wifi tiles on Quick Settings)
Download
Release available under :
https://www.androidfilehost.com/?w=files&flid=51010
Overclocking
Overclocked kernel are tested on my own device BUT I won't be responsible for any damages on yours
Please don't enable mpdecision on OC kernel.
By default the ROM will use stock frequencies.
Thermanager
By default if the device is too hot it will reduce the screen brightness and CPU clock. When the device will be cool enough it will restore brightness and CPU clock but at 1.5Ghz only.
If you want to force thermanager to restore the clock to a specific value defined by an external overclocking tool, you can edit /system/etc/thermanager.xml.
See http://forum.xda-developers.com/showpost.php?p=62419397&postcount=2465
ViPER4Android
All credits go to ViPER520 and the amazing works.
You should read detail and go to thanks developers.
xda : http://forum.xda-developers.com/showthread.php?t=2191223
website: http://vipersaudio.com/blog/?page_id=31
Layers
Themes are supported with Layers Manager.
This is not a CM Theme Engine so you can just use Layers themes.
Howto flash
About Adoptable storage on Android 6:
You are free to use portable or adoptable option for your external sdcard. Don't forget that if you answer "Adoptable", the external sdcard will be FORMATTED and will NOT be usable on an other devices. If you want the classical behavior, you will need to select "Portable"
6.0 and 5.1 procedure
Translation help
6.0 translation files
Source
nAOSP 5.1
nAOSP 6.0
Release
Kernel: 3.4.0
Android: 5.1.1 and 6.0.1
Thanks
- billchen1977
- ViPER4Android Team
- Cyanogenmod Team
- FXP Team
- TWRP Team
- All the community around Android
FAQ
My current screenshoots.
be stuck in the sony interface when start up the mobilephone.
How to do？
netants said:
be stuck in the sony interface when start up the mobilephone.
How to do？
Click to expand...
Click to collapse
Have you repartition the phone yet ?
USB OTG is not working
what bugs in this rom plz ?
tested by me
Mahmoud Halem said:
what bugs in this rom plz ?
Click to expand...
Click to collapse
i guess everything is normal until now.. i have just tested this rom today.. you can see some of my screenshots from acro S..
Mahmoud Halem said:
what bugs in this rom plz ?
Click to expand...
Click to collapse
Everything OK, I try to check USB OTG - it doesn't work on my phone, but I don't know whether this feature really work on other ROM
thank you very much this is what i waiting for.. this works fine on my acro S... here I shared some of screenshots from my phone on google link.. keep developing.. hehe
:good: :good: :good: :good: :good:
goo*gl/photos/fZQvPiepMnF8mRgg6 (replace * with . )
thank you very much this is what i waiting for.. this works fine on my acro S... here I shared some of screenshots from my phone.. keep developing.. hehe
:good: :good: :good: :good: :good: :good:
Hello, this Custom ROM is stable or in Beta?
It is Official or Unofficial?
Thank you for your job!
soulpower11 said:
USB OTG is not working
Click to expand...
Click to collapse
vsergeyev said:
Everything OK, I try to check USB OTG - it doesn't work on my phone, but I don't know whether this feature really work on other ROM
Click to expand...
Click to collapse
Yes USB OTG is working on Xperia S nAOSP rom.
The issue should be on my fstab for hikari
https://github.com/mickybart/device_sony_nozomi/blob/nAOSP-6.0-hikari/config/fstab.semc
/devices/platform/msm_hsusb_host* auto auto defaults voldmanaged=usb:auto
Can you check if you see /devices/platform/msm_hsusb_host* ? Can you provide a logcat of the issue (logcat, plug an usb device, end logcat)
Thanks
What about warning from BPaul regarding complete acro bricking because of increasing data partition?
http://forum.xda-developers.com/showpost.php?p=61563359&postcount=599
Some users in the thread confirmed that eventually they got their device bricked
mickybart said:
Yes USB OTG is working on Xperia S nAOSP rom.
The issue should be on my fstab for hikari
https://github.com/mickybart/device_sony_nozomi/blob/nAOSP-6.0-hikari/config/fstab.semc
/devices/platform/msm_hsusb_host* auto auto defaults voldmanaged=usb:auto
Can you check if you see /devices/platform/msm_hsusb_host* ? Can you provide a logcat of the issue (logcat, plug an usb device, end logcat)
Thanks
Click to expand...
Click to collapse
dmesg - http://pastebin.com/v15k5P7T
logcat - http://pastebin.com/DTHZTTHi
And theres msm_hsub_host.0 and msm_hsusb
Mmmm that's good .. so can someone explain slowly how to install it .. bcuz i don't know anything about repartitioning ..
And can i go back to stock based roms or must take a full backup by twrp before install this rom ?
I love you man❤?
Thanks you've just made my day
I'll be delighted if you fix the otg
Hello, this Custom ROM is stable or in Beta?
It is Official or Unofficial?
Great ROM so far! Obviously Better than AOSP!
Repartitioning wasn't that hard as expected. Just took 3 mins, and it was done!
hitman-xda said:
Great ROM so far! Obviously Better than AOSP!
Repartitioning wasn't that hard as expected. Just took 3 mins, and it was done!
Click to expand...
Click to collapse
Hi hitman, I wonder whether this new ROM consume more memory than AOSP since it stuffed many things inside. Thanks.
I used to have problems with 3G BPaul's AOSP: it will not be connected until I tap on the profile manually while it is chosen by default.
hitman-xda said:
Great ROM so far! Obviously Better than AOSP!
Repartitioning wasn't that hard as expected. Just took 3 mins, and it was done!
Click to expand...
Click to collapse
Hitman please elaborate on the repartio
nting technic
I just wanna know whether there are some devs out there who are working on an Android 12 Custom Rom and a Twrp Recovery Image. Flashing GSI s are now possible but they are super buggy...
Try this gsi
Then to fix some stuff, enable these under phh settings:
> (For headphones) Qualcomm features > Alternate audio policy
> (For speaker crakles, brightness & bluetooth audio) Misc features > Disable audio effects, Force alternative backlight scale, Allow setting brightness to lowest, Force disable A2DP offload
> (For VoLTE fix & carrier aggregation) IMS features > Request IMS network & Force the presense of 4G calling. Hit IMS APK & install the APK shown in the notification panel.
Then reboot. Try these & lemme know, if everything works well.
MPK99 said:
Try this gsi
Then to fix some stuff, enable these under phh settings:
> (For headphones) Qualcomm features > Alternate audio policy
> (For speaker crakles, brightness & bluetooth audio) Misc features > Disable audio effects, Force alternative backlight scale, Allow setting brightness to lowest, Force disable A2DP offload
> (For VoLTE fix & carrier aggregation) IMS features > Request IMS network & Force the presense of 4G calling. Hit IMS APK & install the APK shown in the notification panel.
Then reboot. Try these & lemme know, if everything works well.
Click to expand...
Click to collapse
Do you have twrp
z1_nile said:
Do you have twrp
Click to expand...
Click to collapse
GSIs can be flashable without recovery too, on fastbootd.
CODES;
I am NOT responsible for bricked devices, destroyed SD cards or any
damage that may happen to your device.
Requirements;
Unlocked bootloader
WARNING;Don't use nippon gsi they aren't working,I recommend using phh gsi by phusson lineage os by Andyyan and PE 12 by ponces
INSTRUCTIONS;
Power + volume down button
fastboot reboot fastboot
fastboot delete-logical-partition product
fastboot flash system (name gsi.img)
fastboot reboot recovery
in recovery select wipe data
Reboot to system
bugs:
No bugs
Pixel Experience Plus 12.1 v414 ;
Release Pixel Experience Plus 12.1 v414 · ponces/treble_build_pe
Sync with June sources of PE+ Sync with AOSP 12.1 v414 (thanks @phhusson)
github.com
1)If brightness slider is broken:
2)Go to phh treble settings,misc settings enable "use alternative brightness scale", "use linear screen brightness slider" and "allow setting brightness to the lowest possible",reboot the device
I3)d bluetooth audio is broken:
4)Go to phh treble settings,misc settings, "Force enable a2dp off-load" and "Bluetooth workarounds" select mediatek option and reboot the device
this can rom can take a video recording with 60fps?
efrieblues said:
this can rom can take a video reckrding with 60fpa?
Click to expand...
Click to collapse
Yeah 1080p 60 fps. You can even 1080p 60 fps with gcam
wow nice bro in miui rom, gcam 60fps, still look like 30fps.. thanks bro
Gcam-Rn11-FerZavala.apk
drive.google.com
efrieblues said:
wow nice bro in miui rom, gcam 60fps, still look like 30fps.. thanks bro
Click to expand...
Click to collapse
Download that gcam and enjoy 1080p 60 fps
Sorry i forget to remove that . Go see inbox
Hey i am facing a lot of lag while scrolling doesn`t matter if it is Facebook or settings or any app Any solution for that
muneeb rizwan said:
Hey i am facing a lot of lag while scrolling doesn`t matter if it is Facebook or settings or any app Any solution for that
Click to expand...
Click to collapse
Enable 120 fps from phh treble settings
Let me send you video etc
Go phh treble settings and then misc settings from there you will find force fps. Select 120 fps and boom. Remember it's a GSI not custom ROM
Pixel experience Plus OTA available
zuhaibsarwar said:
CODES;
I am NOT responsible for bricked devices, destroyed SD cards or any
damage that may happen to your device.
Requirements;
Unlocked bootloader
WARNING;Don't use nippon gsi they aren't working,I recommend using phh gsi by phusson lineage os by Andyyan and PE 12 by ponces
INSTRUCTIONS;
Power + volume down button
fastboot reboot fastboot
fastboot delete-logical-partition product
fastboot flash system (name gsi.img)
fastboot reboot recovery
in recovery select wipe data
Reboot to system
bugs:
No bugs
Pixel Experience Plus 12.1 v414 ;
Release Pixel Experience Plus 12.1 v414 · ponces/treble_build_pe
Sync with June sources of PE+ Sync with AOSP 12.1 v414 (thanks @phhusson)
github.com
1)If brightness slider is broken:
2)Go to phh treble settings,misc settings enable "use alternative brightness scale", "use linear screen brightness slider" and "allow setting brightness to the lowest possible",reboot the device
I3)d bluetooth audio is broken:
4)Go to phh treble settings,misc settings, "Force enable a2dp off-load" and "Bluetooth workarounds" select mediatek option and reboot the device
Click to expand...
Click to collapse
version MediaTek
Zerotwo_234 said:
version MediaTek
Click to expand...
Click to collapse
??
Zerotwo_234 said:
version MediaTek
Click to expand...
Click to collapse
What's you mean ?
Is it me? I'm getting an error while installing it seems to be a size related error
About - Generic System Images
A few tips to repair stuff and quality of life improvements:
- PHH Treble Settings -
(device-specific settings)
Open Settings > Phh Treble Settings. Here you have multiple categories.
Head over to 'Samsung features' and enable:
- extended brightness range
- double tap to wake
- access to all cameras
- extra sensors
- Use alternate audio policy
- workaround for white-ish screen
- workaround for broken fingerprint
Get to 'Doze features' and check everything.
Get to 'Misc features' and enable:
- Force allow Always-on Display ( ! HEAVY BATTERY USAGE ! )
- Allow setting brightness to the lowest
- Force enable Camera2API HAL3
- Force-disable A2D0 offload
- Disable FUSE storage layer ( Play with it to see if performance is better or worse )
- Allow takeover of the device by phh
Get to 'IMS features' and enabe:
- Force the presence of 4G Calling
- 4G Calling & Mobile data -
Open Settings > Network & Internet > SIMs > Preferred network type > LTE (recommended)
- Improve Camera -
Disable the inbuilt camera and download this instead. (detailed guide here)Google CameraApply this configAnd this Library- Get fast charging -Install this module, it will ask you to use volume keys, follow the instructions and choose 4500mah 27w. Once installed reboot!
- Increase performance & battery life - Install FDE AI as a system app, it will work better and removes all kernel locks from OEMs.
- Go to FDE.AI Settings and in AI mode check AUTO -( alternatively, check 'Powesave' for a '' long-lasting battery life '' )- Check 'Force Doze' & everything from 'Build.prop tweaks
- Go to 'Other Settings', scroll down, and check 'Autosart'
Exit to the main screen and tap on 'Tools'
here activate the following:
- Kill background apps
- Install Preload app, this manages RAM better.
( I RECOMMEND GETTING FDE.AI TILE IN QUICK SETTINGS
FOR QUICK SWITCH BETWEEN POWER MODE )- Install GMS Doze Magisk Module -
- Improve Audio Quality -
Download & Install SELinux Permissive v2.0 magisk module.
( REBOOT )
Download ViPER4Android FX magisk module.
Install it in magisk and do not reboot. Open ViPER4Android FX App
and let it install the drivers, then it will auto-reboot. Then set it up like how I did.
[ Or place my preset in ' Android\data\com.pittvandewitt.viperfx\files\Preset '
Then press and select the file icon at the top. ]
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
At Convolver's Impulse response setting I've found that those are the best presets:
Apple_Ipod_128K_MP3_02.Bass_Booster
Cassete_Type_II_Chrome_CrO2_
Cassete_Type_IV_Metal_Dolby_NR_B
Play with all Convolver's Impulse response effects provided by the
app and see witch one fits best for you.
Discharge limiter to prevent phone from not booting up after battery dies.
[IS A USEFULL MAGISK MODULE THAT POWERS OFF THE PHONE WHEN IT HITS 5% (or the amount you set it)]~ About this GSI & Credits ~
GSI Testers: DavidJoacaRo
V4A FX implementation ideea: DavidJoacaRo
If you think I missed you DM me and I will credit you![/HR]
UPDATES & CHANGELOG
21/12/2022: (1) Modified thread as a universal guide for fixing bugs after installing AOSP GSIs and further testing. (2) Moved original thread to Samsung Galaxy A71 ROMs, Kernels, Recoveries, & Ot
27/1/2023: (2) Viper4Android new working link : https://github.com/programminghoch10/ViPER4AndroidRepackaged
reserver 3
Reserved4
Really fast GSI, didn't do the Magisk optimizations yet. One small issue is the status bar a little bit to the left but I guess that's a GSI issue. Really fast, 10/10
Also, by any chance. Do you know how I disable storage encryption?
DavidJoacaRo said:
Also, by any chance. Do you know how I disable storage encryption?
Click to expand...
Click to collapse
Flash Multidisabler after flashing IMG file....
Latest 12.1 GSI
.
AleksB.46 said:
About - Generic System Images
A few tips to repair stuff and quality of life improvements:
- PHH Treble Settings -
(device-specific settings)
Open Settings > Phh Treble Settings. Here you have multiple categories.
Head over to 'Samsung features' and enable:
- extended brightness range
- double tap to wake
- access to all cameras
- extra sensors
- Use alternate audio policy
- workaround for white-ish screen
- workaround for broken fingerprint
Get to 'Doze features' and check everything.
Get to 'Misc features' and enable:
- Force allow Always-on Display ( ! HEAVY BATTERY USAGE ! )
- Allow setting brightness to the lowest
- Force enable Camera2API HAL3
- Force-disable A2D0 offload
- Disable FUSE storage layer ( Play with it to see if performance is better or worse )
- Allow takeover of the device by phh
Get to 'IMS features' and enabe:
- Force the presence of 4G Calling
- 4G Calling & Mobile data -
Open Settings > Network & Internet > SIMs > Preferred network type > LTE (recommended)
- Improve Camera -
Disable the inbuilt camera and download this instead. (detailed guide here)Google CameraApply this configAnd this Library- Get fast charging -Install this module, it will ask you to use volume keys, follow the instructions and choose 4500mah 27w. Once installed reboot!
- Increase performance & battery life - Install FDE AI as a system app, it will work better and removes all kernel locks from OEMs.
- Go to FDE.AI Settings and in AI mode check AUTO -( alternatively, check 'Powesave' for a '' long-lasting battery life '' )- Check 'Force Doze' & everything from 'Build.prop tweaks
- Go to 'Other Settings', scroll down, and check 'Autosart'
Exit to the main screen and tap on 'Tools'
here activate the following:
- Kill background apps
- Install Preload app, this manages RAM better.
( I RECOMMEND GETTING FDE.AI TILE IN QUICK SETTINGS
FOR QUICK SWITCH BETWEEN POWER MODE )- Install GMS Doze Magisk Module -
- Improve Audio Quality -
Download & Install SELinux Permissive v2.0 magisk module.
( REBOOT )
Download ViPER4Android FX magisk module.
Install it in magisk and do not reboot. Open ViPER4Android FX App
and let it install the drivers, then it will auto-reboot. Then set it up like how I did.
[ Or place my preset in ' Android\data\com.pittvandewitt.viperfx\files\Preset '
Then press and select the file icon at the top. ]
At Convolver's Impulse response setting I've found that those are the best presets:
Apple_Ipod_128K_MP3_02.Bass_Booster
Cassete_Type_II_Chrome_CrO2_
Cassete_Type_IV_Metal_Dolby_NR_B
Play with all Convolver's Impulse response effects provided by the
app and see witch one fits best for you.
Discharge limiter to prevent phone from not booting up after battery dies.
[IS A USEFULL MAGISK MODULE THAT POWERS OFF THE PHONE WHEN IT HITS 5% (or the amount you set it)]~ About this GSI & Credits ~
GSI Testers: DavidJoacaRo
V4A FX implementation ideea: DavidJoacaRo
If you think I missed you DM me and I will credit you![/HR]
Click to expand...
Click to collapse
can you please fix the link of viper4android? The version of viper I am using(viper repackaged) doesn't have any impulse responses.