Develop Bugs

WM6 update sticking at 28%

Hi all, new to all this.
I have spent the last 6 days scanning the forums and wiki about upgrading to the offical rom for the trinity to WM6.
I have tried super cid and sim unlocks as well as Hard SPL and many other tricks and advice from users.
None of them seem to work.
Does anyone have a real idea (a proper technical answer) as to why the progress stops @ 28% on this update and not on any of the cooked roms?
I would really appreciate some help on this.....
Thanks all
walterjm

search on top is your friend

udK said:
search on top is your friend
Click to expand...
Click to collapse
I know, but I have been using this for Six day's and tried all avenues. The reason to ask here is one of frustration.
But thanks anyhow....

my guess is something about the ipl or spl, since after you remove those and put it in a modified RUU it works..

racerx_ said:
my guess is something about the ipl or spl, since after you remove those and put it in a modified RUU it works..
Click to expand...
Click to collapse
Hey thanks for the tip will keep looking and learn how to modify RUU file...
Cheers
walterjm

racerx_ said:
my guess is something about the ipl or spl, since after you remove those and put it in a modified RUU it works..
Click to expand...
Click to collapse
OK I am completely stupid. Can anyone point me in the correct direction on how to modify RUU files.
Please please please...

I have the following in the bootloader menu
IPL-1.00
SPL-1.30.Olipro
Should I be able to load the official WM6 rom from HTC?

yeah, technically...

why don't you try the official rom without SPL?
You can get it here:
http://forum.xda-developers.com/showthread.php?t=324744

racerx_ said:
yeah, technically...
Click to expand...
Click to collapse
ok I found the answer....
http://forum.xda-developers.com/showthread.php?t=321182&page=7
..........................................
http://rapidshare.com/files/47349234...nospl.rar.html
First flash hard spl before flashing this rom!
http://forum.xda-developers.com/showthread.php?t=299659
And dont hold me responsible if this update fails for you.
It worked fine for me.
Spl and Ipl are removed , and splash screens changed to htc screens.
Thats all , so it still has latest radio and extrom.
I advise you to soft reset when you first boot your trin and see the screen that says customization will start in 3 seconds.
...................................................................................
this is the only way I could do it. Something is no quite correct with the
I think the guys at this thread need to revisit there ideas......
http://forum.xda-developers.com/showthread.php?t=299659
because it does not work ...
cheers walterjm

[email protected] said:
why don't you try the official rom without SPL?
You can get it here:
http://forum.xda-developers.com/showthread.php?t=324744
Click to expand...
Click to collapse
Hey I was typing the response as your did also....
I think this is what I did. Works great. Still seems to be a problem.
Where can I learn more about spl, ipl, hard spl and all those technical terms...???
cheers walterjm

http://wiki.xda-developers.com/index.php?pagename=HTC_Trinity
XDADeveloperWiki - HTC_Trinity
Also search with google - go to advanced search and search http://forum.xda-developers.com for the above terms - you'll learn lots!

Bad Flash?

Hello I have a HTC Hermes. I put "Schaper's WM6.1 Pro 4.40 Beta ROM." This is rom install up to 100 percent but when turn on get stuck with this message:
Hello I have a HTC Hermes.
I put "Schaper's WM6.1 Pro 4.40 Beta ROM".
This is rom install up to 100 % but when turn on get stuck with this message:
"This colncludes the beta test of this software realse. Thankyou very much for your time and effort in helping makethis a great product for our custumers.
To obtain a newer realse of futher information, please revisit the web site that you used to obtain your current beta realse."
Please someone help me!. My HTC Hermes not turn on!!!

Flash a different ROM to your device.

find out how to unbrick a device in the Wiki

Its the timebomb. Just flash another ROM will do.. =)

kwangchin said:
Its the timebomb. Just flash another ROM will do.. =)
Click to expand...
Click to collapse
Hi. Total noob here, just doing my first rom and i get this same message "This concludes the beta test of this software release. Thank you very much for your time and effort in helping make this a great product for our customers.
To obtain a newer release or futher information, please revisit the web site that you used to obtain your current beta release."
I tried this rom OS 5.2.19949 (Build 19949.1.2.0 PV DVH but i cannot get a connection with AcxtiveSync to flash another Rom.
please help a hopeless noob !!!
thanks muchly guys.

peteput said:
Hi. Total noob here, just doing my first rom and i get this same message "This concludes the beta test of this software release. Thank you very much for your time and effort in helping make this a great product for our customers.
To obtain a newer release or futher information, please revisit the web site that you used to obtain your current beta release."
I tried this rom OS 5.2.19949 (Build 19949.1.2.0 PV DVH but i cannot get a connection with AcxtiveSync to flash another Rom.
please help a hopeless noob !!!
thanks muchly guys.
Click to expand...
Click to collapse
Option 1: Put your PDA in bootloader mode [Visit this link to find out how: http://wiki.xda-developers.com/index.php?pagename=Hermes_Resets] and flash a new ROM.
Option 2: Flash a new ROM from the SD Card [Visit this link to find out how: http://wiki.xda-developers.com/index.php?pagename=Hermes_SDCardFlashing].
Note: If you have read the wiki you would have foub how to do it...
Cheers.

wow fast response, thank you. I will try the sd card option as I cannot go to bootload mode, all I have is this beta screen.

peteput said:
wow fast response, thank you. I will try the sd card option as I cannot go to bootload mode, all I have is this beta screen.
Click to expand...
Click to collapse
You cannot go to bootloader mode? Howcome? Why can't you do it? Have yu read the link i posted befre to see how you should do it? This is very simple... Just press OK+POWER and while pressing it stick the stylus on the soft reset hole and then release the buttons... Intead of choosing the SD Card flash you sould try the other process first... If you can flash normally why use another method...?
Well, that's up o you. Both methods are functional
Cheers.

ahh so sorry, silly me. the reset button not a reset option on screen, jeez one day I will get my head around this... thanks again

thank you thank you thank you thank you =)

peteput said:
ahh so sorry, silly me. the reset button not a reset option on screen, jeez one day I will get my head around this... thanks again
Click to expand...
Click to collapse
Ah, one day you may spend a little time and read some of the WIKI.

I did spend time reading the wiki but as this is my first effort it is mostly gobbledygook to me, we all have to start somewhere..... thank you once again for the much needed help.

Wam7 said:
Ah, one day you may spend a little time and read some of the WIKI.
Click to expand...
Click to collapse
Although you are absolutely right, go easy on him... Play nice...
He has been pointed in the right direction. Now it's up to him...
Cheers.

Kevlar-Source said:
Although you are absolutely right, go easy on him... Play nice...
He has been pointed in the right direction. Now it's up to him...
Cheers.
Click to expand...
Click to collapse
Hey I thought this was a good cop/bad cop scenario! You played the good cop well!

yeah but you sucked at the bad cop routine.

peteput said:
yeah but you sucked at the bad cop routine.
Click to expand...
Click to collapse
You're lucky I didn't get my telephone directory out! (Apparently it doesn't leave bruises but hurts like hell!)
Seriously though, if you read the bit on "Upgrading for beginners" in the WIKI, your problem would have been sorted. It's the very first thing any noob should read.

Wam7 said:
"Upgrading for beginners" It's the very first thing any noob should read.
Click to expand...
Click to collapse
Indeed... Very true
Cheers.

Kevlar-Source, whats wrong with using the sd card method? Its a helluva lot safer than flashing via pc. No chance of jail sentence because a "cleanaholic" accidently pressed the reset button while wiping over the front of your wire mesh fronted screnn with a wet soapy clothe because, and I quote, "It looked dirty". Justifiable homicide if you ask me.....
Oh well at least the power didn't go o
Sorry didn't finish, had a blackout.....:b
Cheers...

ultramag69 said:
Kevlar-Source, whats wrong with using the sd card method? Its a helluva lot safer than flashing via pc. No chance of jail sentence because a "cleanaholic" accidently pressed the reset button while wiping over the front of your wire mesh fronted screnn with a wet soapy clothe because, and I quote, "It looked dirty". Justifiable homicide if you ask me.....
Oh well at least the power didn't go o
Sorry didn't finish, had a blackout.....:b
Cheers...
Click to expand...
Click to collapse
There is nothing wrong at all with the SD Card method... I just thaught that, for a noob, it would be easyer and more straightforward to try to flash normally...
Cheers.

Kevlar-Source said:
There is nothing wrong at all with the SD Card method... I just thaught that, for a noob, it would be easyer and more straightforward to try to flash normally...
Cheers.
Click to expand...
Click to collapse
oh come on Kevlar, dont back out now....let's keep it going!

I am new. How do i put a new rom on my phone.

Hi
I am not new to technical forums. But I am new to this phone and I want to put a new rom on this phone. The current one is so slow.
What is the best rom available.
How do i put a new rom onto the phone.
Please keep it simple or point me to step by step specific instructions. Not a set of generalised instructions.
I looked at the how to thread. It was not step by step and got lost after three clicks.
specific help would be excellent.

Vivasvan said:
Hi
I am not new to technical forums. But I am new to this phone and I want to put a new rom on this phone. The current one is so slow.
What is the best rom available.
How do i put a new rom onto the phone.
Please keep it simple or point me to step by step specific instructions. Not a set of generalised instructions.
I looked at the how to thread. It was not step by step and got lost after three clicks.
specific help would be excellent.
Click to expand...
Click to collapse
Hi I used this one it help me out alot. http://forum.xda-developers.com/showthread.php?t=416211

oh ok im going to follow this and see what happens.
thank you!
will a new rom make this phone faster?

Vivasvan said:
Hi
I am not new to technical forums. But I am new to this phone and I want to put a new rom on this phone. The current one is so slow.
What is the best rom available.
How do i put a new rom onto the phone.
Please keep it simple or point me to step by step specific instructions. Not a set of generalised instructions.
I looked at the how to thread. It was not step by step and got lost after three clicks.
specific help would be excellent.
Click to expand...
Click to collapse
Well this is almost a daily question.
To help you how to update your phone, please look in the sticky's. They can be usefull.
You will find this one [TUT]Complete upgrading guide (HardSPL+Radio+ROM) NOT FOR CDMA USERS!!!
And for best radio, you could always look here.
Pietrucci benchmarks thread, one damn good one.
Hope this is helping you on the way.
/Danny

before you play...please read info on upgrading in the stickies
i don't want you next post to be "help i have bricked my diamond"
good luck and welcome to the forums

Vivasvan said:
oh ok im going to follow this and see what happens.
thank you!
will a new rom make this phone faster?
Click to expand...
Click to collapse
Yes alot, after i been using a custom rom & getting it back from repair, i'd had to get a custom rom on the phone again, its to slow without if you asking me.
But that's just what I think.
liamhere said:
before you play...please read info on upgrading in the stickies
i don't want you next post to be "help i have bricked my diamond"
good luck and welcome to the forums
Click to expand...
Click to collapse
Could say it better liam

ok i am already reading but will be patient and do more reading
first of all .. how do i know what my actual model is..
htctouch diamond?
or p3700?

Vivasvan said:
ok i am already reading but will be patient and do more reading
first of all .. how do i know what my actual model is..
htctouch diamond?
or p3700?
Click to expand...
Click to collapse
...tihs is the same my dear!

Vivasvan said:
ok i am already reading but will be patient and do more reading
first of all .. how do i know what my actual model is..
htctouch diamond?
or p3700?
Click to expand...
Click to collapse
No difference.. Same phone.
Don´t forget hardSPL and read the thread that liamhere posted.. Good luck.

well this seems like a good forum.
Ok so im still reading that guide... just a question on backup...
how am i going to backup the information on a phone? its not as if it has a cdburner lol
i dont want to loose all my info/sms historys stuff/etc. once i know this then i will get on with the hardspl stuff and radio stuff.

Vivasvan said:
well this seems like a good forum.
Ok so im still reading that guide... just a question on backup...
how am i going to backup the information on a phone? its not as if it has a cdburner lol
i dont want to loose all my info/sms historys stuff/etc. once i know this then i will get on with the hardspl stuff and radio stuff.
Click to expand...
Click to collapse
.use this one: http://forum.xda-developers.com/showthread.php?t=299705

This Thread Must Die!!!!
@OP, you've been pointed in the right direction and escaped the usual harsh treatment for asking such questions.
I'm closing this thread. Please remember to search and READ THE WIKI before posting questions. Also, while new threads are sometimes needed double & triple check before creating a new thread. Read the link sin my signature for more info...

app2SD

can someone provide us a tutorial for windows users about how to install app2sd on rooted desire's, without installing cooked ROM's? because i saw that many of you had bad experience about this, and it's better to have a small tutorial about this kind of installation. thx

Yep, click the second link in my sig (Windows only method) for a detailed and very easy step-by-step guide on how to achieve all this in Windows.

thx a lot

ady_uaic said:
thx a lot
Click to expand...
Click to collapse
no problem Bud
Just to add, you will only need to create a Gold Card if your phone is branded.
To test that Apps2SD is working after you install and partition your SD Card, see this link:
http://forum.xda-developers.com/showthread.php?p=6414202#post6414202

I'll do that mate, cheers! ...really nice thoughts .

ady_uaic said:
I'll do that mate, cheers! ...really nice thoughts .
Click to expand...
Click to collapse
no worries bud, if you encounter any problems i'll try to help... going to bed soon tho, almost 4 am here!

i've sent you a pm..nite nite..here is 23.42 (buenos aires) for moment, untill i'll be back in Romania .

ady_uaic said:
i've sent you a pm..nite nite..here is 23.42 (buenos aires) for moment, untill i'll be back in Romania .
Click to expand...
Click to collapse
I just sent you a pm back, i will stay online for a little while, just pm me back if you have any more questions.
Thanks.

[VIDEO TUTORIAL]Multiple Video Tutorials on How To Install Android to NAND on the HD2

Please vote for this thread to be featured on the front page by clicking the "Vote To Front Page" button above this post!
Here is a video tutorial I put together in great quality on how to install the new android NAND ROM with full description. Please share this as well, there are no good tutorials on it yet and I spend a lot of time putting this together.
Please help spread the word about this video and help it get pinned if possible! This new Android ROM is huge and there are no good video tutorials on it yet. I put hours into this tutorial and it will help a lot of people get a better understanding!
IMPORTANT!! Please use this Video Tutorial ALONG with the written guide *HERE* as following just the Video Tutorial may lead you to miss parts of the process that could cause problems later.
If you are having any problems installing MAGLDR or the NAND ROM the fixes for them can be found by clicking here!
MOD EDIT:: Embedded YouTube video fixed!!
Click here to download MAGLDR version 1.11
Click here to download Android NAND ROM
If you want to get back to windows mobile hold down the power and volume bottom. You will see the colors screen. Then you can enter back into windows mobile, by putting a windows rom on your phone.
I will be updating information about battery life as well
I took the phone off the charger this mourning at 8:30 AM (PST) it is now 11:00 AM and I still have a full battery gauge.
It has now been 7 hours and I still have 75% battery life, I think its putting out a lot better then the SD version.
After a total of 18 hours and 47 minutes my phone finally died and lost all battery power, it had a good first run, I used it frequently also, I like the battery power!
______________________________________________________________
This video below shows you how to install android NAND CMN 6.1 and fix the wifi problem.

This is a pretty good tutorial for anyone who needs a visual to go along with the instructions!!!

scpmp803 said:
This is a pretty good tutorial for anyone who needs a visual to go along with the instructions!!!
Click to expand...
Click to collapse
Thank you! There are no other good tutorials up yet, there are two others but the ones I have seen are in bad quality and don't explain to well. Please help me share the video if you can! Hopefully get this topic pinned, it would be great for the viewers!

nice.. should be merged with http://forum.xda-developers.com/showthread.php?t=893948

Thank you

Fishawy said:
Thank you
Click to expand...
Click to collapse
No problem I am glad my tutorial helped you!
Seems like the video is getting a lot of traffic! Hope that everyone is finding it useful!

thanks a lot for this
Exactly what i needed, I wouldn't dare install it without a video tutorial!

JosephAGT said:
thanks a lot for this
Exactly what i needed, I wouldn't dare install it without a video tutorial!
Click to expand...
Click to collapse
Awesome! Many people are finding it helpful! Please spread the word about the video if possible, as soon as I there were no good tutorials I knew I had to post one.
Getting a lot of questions on the video! Keep asking and I will help as much as possible.

Hey!
very helpful vid, thx man.
Only thing missing is a comment regarding the needed hspl version (>2.08) and radio version (radio that enables the 576 ram). Maybe just add it in the description.
@all: have fun with android nand
THX COTULLA!!!!
Sent from my HTC HD2 using XDA App

thanks for the video! going thru it now

Thanks I will try to add that ASAP. Please share the video!
ricola7 said:
Hey!
very helpful vid, thx man.
Only thing missing is a comment regarding the needed hspl version (>2.08) and radio version (radio that enables the 576 ram). Maybe just add it in the description.
@all: have fun with android nand
THX COTULLA!!!!
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
Still trying to add more to the video description and it should be up soon!
The post is doing well, so is the video, rapidly growing in view count, please share the video and get it some more views!
Everything should now be fixed and updated! The video should now be up to date with the description! Everyone enjoy your NAND
For any of those wondering, to check the HardSPL, it displays in the bottom corner when you boot your phone, I have been getting that question a lot and just want to let you guys know!

TechBurrow said:
For any of those wondering, to check the HardSPL, it displays in the bottom corner when you boot your phone, I have been getting that question a lot and just want to let you guys know!
Click to expand...
Click to collapse
Correction, the hspl (or even spl version) DOESN"T show when you boot your phone. The only way to see it is to boot into bootloader mode.

ClydeB1 said:
Correction, the hspl (or even spl version) DOESN"T show when you boot your phone. The only way to see it is to boot into bootloader mode.
Click to expand...
Click to collapse
Oh, some other people that were commenting on the video were clearing that up, but that you for the post anyways! Thanks for clearing that up.
I'm testing the NAND right now, just downloaded the xda app from the marketplace, the ROM is really fast
Sent from my HTC HD2 using XDA App
I'm heading off to bed now. If you have any personal messages let me know.
Sent from my HTC HD2 using XDA App
Overnight and it is still working great for me! No lag or slow downs yet.
Sent from my HTC HD2 using XDA App

Instructions for adding a build on and running from sd card (via magldr)?

Mik0 said:
Instructions for adding a build on and running from sd card (via magldr)?
Click to expand...
Click to collapse
Not to sure what you mean by that? I'm pretty sure I explained it in the video, it has been working for others.
I want to thank mskip for adding the tutorial to his post!
Video is over 3,000 views! Thanks everybody! I think it's starting to get noticed more and more.
Thank you for the PM's everybody! Keep them coming!

Am sorry, but can you make another tutorial or even some steps about flashing back to WinMo, in case someone messed thing up?

You do it the same exact way you flash the android ROM, you need to hold the power button to enter MAGLDR and then go into the "USB Flasher" once you have done that you can download any WinMo rom and install it back on your phone! Nothing to it.
Fishawy said:
Am sorry, but can you make another tutorial or even some steps about flashing back to WinMo, in case someone messed thing up?
Click to expand...
Click to collapse

TechBurrow said:
You do it the same exact way you flash the android ROM, you need to hold the power button to enter MAGLDR and then go into the "USB Flasher" once you have done that you can download any WinMo rom and install it back on your phone! Nothing to it.
Click to expand...
Click to collapse
Thank you again

I have added information on how to downgrade to windows mobile if you do not want NAND.
Fishawy said:
Thank you again
Click to expand...
Click to collapse
No problem! Glad I could help!
I am adding information on my battery life I have with the phone, I will be updating it in the post frequently. A lot of people have been asking me about this so I thought it would be a nice add.
Thank you to mskip for posting the link to my tutorial on his thread! Glad to get this great tutorial out there.

please help me!!!!!
after installation MAGLDR i can't connect the htc hd2 with my pc !!!
THX