Develop Bugs

[Q] TMO Galaxy Note 2 tv out?

I have Galaxy note 2 tmo usa version.
I tried to use tv out with following item
1) sony bravia xbr9 tv
2) Micro USB to HDMI® MHL Adapter (http://www.monoprice.com/products/p...=10833&cs_id=1083314&p_id=8675&seq=1&format=2)
3) Note 2
4) standard hdmi cabel
I tried to connect but there is no signal on tv. all connection was proper and power was on to tv and the adapter.
I tired to diff hdmi cable - connection between TV and Adapter. but no luck .Also changed hdmi port on tv.
is there specific adapter i need to buy fr note 2 or hdmi cabel?

uhs74 said:
I have Galaxy note 2 tmo usa version.
I tried to use tv out with following item
1) sony bravia xbr9 tv
2) Micro USB to HDMI® MHL Adapter (http://www.monoprice.com/products/p...=10833&cs_id=1083314&p_id=8675&seq=1&format=2)
3) Note 2
4) standard hdmi cabel
I tried to connect but there is no signal on tv. all connection was proper and power was on to tv and the adapter.
I tired to diff hdmi cable - connection between TV and Adapter. but no luck .Also changed hdmi port on tv.
is there specific adapter i need to buy fr note 2 or hdmi cabel?
Click to expand...
Click to collapse
Had the same problem..there was nothing wrong with my connection as I switched to my old GS2 and HTC One S and both worked..

ellac49 said:
Had the same problem..there was nothing wrong with my connection as I switched to my old GS2 and HTC One S and both worked..
Click to expand...
Click to collapse
thanks fr reply. but i didnt get you how to make it work?

The note 2 and the s3 have different hml adapters. You will also need a converter.
On the monoprice link you posted, youll notice ab asterisk next to the s3. Same applies to the note 2.
http://www.monoprice.com/products/p...=10833&cs_id=1083314&p_id=9716&seq=1&format=2
Sent from my SGH-T889 using xda app-developers app

cholepuree1 said:
The note 2 and the s3 have different hml adapters. You will also need a converter.
On the monoprice link you posted, youll notice ab asterisk next to the s3. Same applies to the note 2.
http://www.monoprice.com/products/p...=10833&cs_id=1083314&p_id=9716&seq=1&format=2
Sent from my SGH-T889 using xda app-developers app
Click to expand...
Click to collapse
I just got a Samsung HDTV Adapter Tip (5 to 11 Pin) Model EPL-FU10BEBSTD, which has micro-USB female to male; it enabled my TMobile "HDMI connection kit" that had worked with Galaxy S2 Hercules to work now with my Galaxy Note II. The connection kit was expensive, but has a 10' cable from the MHL adapter body to the male micro-usb plug, as well as a 5' cable to the TV HDMI, and a wall charger to power the adapter body. So the arrangement is quite flexible once installed.

I was hoping someone could help me with this problem also. I have a hdmi capable monitor that I would like to hook my note2 up to but for whatever reason the monitor will not detect the signal. i have tried rebooting and connecting it various ways but no dice.
the only thing i can think of is that its the rom im using which is myrom's latest version

Do you have 5pin or 11pin mhl cable? Note2 requires 11pin one.
Sent from my SGH-T889 using xda app-developers app

SolaceKane said:
the only thing i can think of is that its the rom im using which is myrom's latest version
Click to expand...
Click to collapse
I was told you need an S3 cable. Here's the one I use.
http://www.ebay.com/itm/310491287097?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2648

Yea you guys are right you need 11 pin for the note 2. the sgs2 used 5 pin so if you have one for your older phone you need a new one or I think they make a converter too. I would suggest getting right from samsung. it may cost more but you get what you pay for usually and samsung makes the best stuff when it comes to that. Also another thing to consider while you are on samsungs website they have a multimedia dock that is on backorder right now but for a 100 dollars it turns your note2 into a pc basically. It has 3 full size usb ports so you can hook up a mouse keyboard and external hard drive and it has the hdmi port and an auido port so you can hook it up to a hdmi tv/ monitor and multimedia speaker system. I was going to get a new computer but I found this thing. So basically I can have an android desktop. It dont get better than that. Now wit dropbox and mobile odin and this exynos exploit we really dont need to hook up to a pc to root so there is no real reason for it. Just something to think about.

This is really helpful. My question is will this charge your phone while you are connected to the tv? Also, I see some of the description on ebay says it might not work if you are rooted.

safeplayer22 said:
This is really helpful. My question is will this charge your phone while you are connected to the tv? Also, I see some of the description on ebay says it might not work if you are rooted.
Click to expand...
Click to collapse
I am rooted; The MHL/HDMI system works well, if that is your concern. The charger that I use for the MHL adapter is much lower amperage than the one that came with the Galaxy Note 2, so I would guess that charging might be slow if you are watching a movie that way, or maybe not even keep up, but I don't have the patience to do the test (or watch movies that way).

Hmmmm!!!!
I just got the Samsung dock and can't connect with HDMI on rooted stock.
The phone detects the dock and charges up, but no signal to the screen. Also tried hooking it up with the TV and projector using two different custom rom and separate HDMI cables and no dice.
Guess the dock is defective.

OTG adapter

Bought two OTG adapters on eBay, they arrived from China today. When I attach them they are both recognized by the system. However, when I insert a USB memory stick I receive an error message about "high powered USB device" and the system won't acknowledge the presence of a memory stick. But, if I insert the Samsung OTG adapter I have no problem getting the same memory sticks accepted.
Is there anything I can do to correct this? Or have I just wasted $13? (I'm not gonna cry if that is the case)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my GT-N8010 using Tapatalk HD

It is possible the active components in those adaptors plus the USB stick is pushing the consumption over the edge, where the simple Samsung adaptor does not.
I also have one of those adaptors by the way but have not had the same problem so far. Maybe my USB stick needs less power.

Kumabjorn said:
Bought two OTG adapters on eBay, they arrived from China today. When I attach them they are both recognized by the system. However, when I insert a USB memory stick I receive an error message about "high powered USB device" and the system won't acknowledge the presence of a memory stick. But, if I insert the Samsung OTG adapter I have no problem getting the same memory sticks accepted.
Is there anything I can do to correct this? Or have I just wasted $13? (I'm not gonna cry if that is the case)
Sent from my GT-N8010 using Tapatalk HD
Click to expand...
Click to collapse
Try to support the OTG with an external power supply...
Good luck

Galaxyer said:
Try to support the OTG with an external power supply...
Good luck
Click to expand...
Click to collapse
The one with the cord seems to have a connector, but the other doesn't. I suppose the 5V standard is applicable.
Sent from my GT-P3113 using Tapatalk HD

Try connecting everything together then connecting the OTG adapter to the Note. I have the same issue sometimes when connecting any device if the adapter is already connected.

Kumabjorn said:
Click to expand...
Click to collapse
Could I get a link for that one on the left (with the cable)?
Also, FWIW, I have three of the one on the right, and one of them just doesn't work reliably at all; glad I'd bought more than one (they were like ~$2.50 so something told me I should get spares )

did you check if there is a small button to change mode on the hubs ?

aalupatti said:
did you check if there is a small button to change mode on the hubs ?
Click to expand...
Click to collapse
Yes, of course

rtan73 said:
Try connecting everything together then connecting the OTG adapter to the Note. I have the same issue sometimes when connecting any device if the adapter is already connected.
Click to expand...
Click to collapse
Once in a while I had the same issue with the original adapter. With the new ones I don't get the error message but neither is the presence of the USB memory acknowledged. The larger one with cord has a blue power light that goes on. It turns off when I insert the stick but stay on when I insert it joint with the OTG adapter.
Sent from my GT-N8010 using Tapatalk HD

kcrudup said:
Could I get a link for that one on the left (with the cable)?
Also, FWIW, I have three of the one on the right, and one of them just doesn't work reliably at all; glad I'd bought more than one (they were like ~$2.50 so something told me I should get spares )
Click to expand...
Click to collapse
http://dx.com/p/5-in-1-combo-connec...ard-reader-for-samsung-galaxy-tab-10-1-160647
Just remember, it isn't working.
Sent from my GT-N8010 using Tapatalk HD

aalupatti said:
did you check if there is a small button to change mode on the hubs ?
Click to expand...
Click to collapse
The small one has it, I thought it was an ejector button for the card slot. I tried changing it but same difference.
Sent from my GT-N8010 using Tapatalk HD

I have an OTG adapter that's jsut a data-port-plug then a cable leading to a female-USB, I've had a lot of issues with USB devices being classified as "high power" and not working (including an Xbox360 controller, which has been listed on this site as usable without external power) I've tried 5 different hubs, and only 1 will work (3 brand-name (2x Ultra, 1xBelkin) and 2 unbranded from china) that's the one that accepts external power.
I could be wrong but I think they pulled the same trick apple did and an update lowered the power to the docking port, so you HAVE to use a powered hub to do much of anything... (though for the record, none of my 4 USB sticks (1gb, 4gb, 64gb, 64gb) have required external power...)

Kumabjorn said:
Link to reader I'd wanted. Just remember, it isn't working.
Click to expand...
Click to collapse
Oh, that's OK- I make my own kernels and can probably get around that host-mode current-draw issue.

Ashton_Durkhun said:
I have an OTG adapter that's jsut a data-port-plug then a cable leading to a female-USB, I've had a lot of issues with USB devices being classified as "high power" and not working (including an Xbox360 controller, which has been listed on this site as usable without external power) I've tried 5 different hubs, and only 1 will work (3 brand-name (2x Ultra, 1xBelkin) and 2 unbranded from china) that's the one that accepts external power.
I could be wrong but I think they pulled the same trick apple did and an update lowered the power to the docking port, so you HAVE to use a powered hub to do much of anything... (though for the record, none of my 4 USB sticks (1gb, 4gb, 64gb, 64gb) have required external power...)
Click to expand...
Click to collapse
Yeah, it surprised me to get that error on a memory stick, I didn't think they used much voltage.
Sent from my GT-P3113 using Tapatalk HD

So, now I have tried all possible connections to see if I could get the OTG adapters to work. The short answer is that they are rubbish.
I connected older (USB 1.0 and 2.0) memory sticks to no avail. Granted I didn't get the high power error message, but I didn't get anything else either, least of all access to my files. So that was out. I then connected a USB keyboard, again I received the high power error message and couldn't use the keyboard. Finally I connected a portable charger to the larger (5-in-1) connecter, the one with the cable, in order to see if that would help. All it did was burn the inside, took a few moments and then smoke started to come out together with the unmistakable smell of burnt copper.
Anyone, interested in these connectors would be wise to proceed with caution. Yes, the price is alluring, but if value is zero then anything over zero is too expensive.
Sent from my GT-N8010 using Tapatalk HD

Kumabjorn said:
So, now I have tried all possible connections to see if I could get the OTG adapters to work. The short answer is that they are rubbish.
I connected older (USB 1.0 and 2.0) memory sticks to no avail. Granted I didn't get the high power error message, but I didn't get anything else either, least of all access to my files. So that was out. I then connected a USB keyboard, again I received the high power error message and couldn't use the keyboard. Finally I connected a portable charger to the larger (5-in-1) connecter, the one with the cable, in order to see if that would help. All it did was burn the inside, took a few moments and then smoke started to come out together with the unmistakable smell of burnt copper.
Anyone, interested in these connectors would be wise to proceed with caution. Yes, the price is alluring, but if value is zero then anything over zero is too expensive.
Sent from my GT-N8010 using Tapatalk HD
Click to expand...
Click to collapse
Looks like the ability to connect a USB stick is questionable. I just got an adaptor, the one that is just cable with female usb on one end. I plug it in and the device says USB connected. Doesn't recognize the card. But I do not get the error about "high power device" that everyone is referring to. It just doesn't recognize the card.
I used two cards. One is an Attache 16gb that has a rather bright light on it. On the laptop, when its plugged in, it stays on, and blinks when being accessed. When I plug it in to the tablet, the light comes on for a couple seconds, goes out, and nothing.
The other one is a PNY 16gb with no light. I tried it thinking the light might have thrown the Attache over the edge. The PNY doesn't seem to be recognized either. No errors. Just no response.
Is there a mount or something I have to do somewhere? Documentation with this thing is less than stellar so if there IS a document that answers this, I haven't found it.
Thanks.
EDIT: I tried with a powered USB hub and it worked. So its definitely a level of power issue. Now the trick is to find a way to have portable power on the hub. I recently tried using one of the portable cell phone power packs but I think it may have been defective as it would not charge up. I had purchased a solar powered USB hub but it worked once then ceased forever to function.

smart dock

hi,
could be nice to see if the smart dock (the one with HDMI port, 3 usb ports, etc) manufactured for the galaxy note 2, will be compatible with the tablet note 10.1 2014 edition.
It seems to work on the new note 3 and just wondering if might be the case for the tablet as well. I see that the new tablet has a usb port that looks like the one in the note 3 (even thogh the latter mounts a usb 3 and the tablet a usb 2 as far as I know)
Regards

luigi37 said:
hi,
could be nice to see if the smart dock (the one with HDMI port, 3 usb ports, etc) manufactured for the galaxy note 2, will be compatible with the tablet note 10.1 2014 edition.
It seems to work on the new note 3 and just wondering if might be the case for the tablet as well. I see that the new tablet has a usb port that looks like the one in the note 3 (even thogh the latter mounts a usb 3 and the tablet a usb 2 as far as I know)
Regards
Click to expand...
Click to collapse
I second this, the dock looks great for use with the tablet. If it works of course.

I have
<samsungs site>us/mobile/cell-phones-accessories/EDD-S20JWEGSTA
this(sorry can't create links yet) dock. If this is the one you're referencing, it works awesome with my S4... but... doesn't work with the note 10.1 2014 I have. Doesn't even recognize it as a source of power. So the dock appears to be useless.

Saik0Shinigami said:
I have
<samsungs site>us/mobile/cell-phones-accessories/EDD-S20JWEGSTA
this(sorry can't create links yet) dock. If this is the one you're referencing, it works awesome with my S4... but... doesn't work with the note 10.1 2014 I have. Doesn't even recognize it as a source of power. So the dock appears to be useless.
Click to expand...
Click to collapse
Yes thats the one, its a shame though that it does not work. One of those could turn the tab into a small computer, for when you travel etc.

try it with original power adapter from note 10.1 2014
Hi guys,
Did you try the Multimedia dock powered by the AC USB charging adapter which came with the Note 2014?

wugga said:
Hi guys,
Did you try the Multimedia dock powered by the AC USB charging adapter which came with the Note 2014?
Click to expand...
Click to collapse
Yes, I have tried it with original AC adapter and with Note 10.1 AC adapter - nothing happened in both cases - the dock just doesn't do anything with Note 10, it does work just fine with Note 2.
It's funny though, as I do have another adapter, it's called HDMI Connection kit (http://shop.brando.com/HDTV-Adapter-and-OTG-Card-Reader_p09720c1451d001.html), and that one does work, I can connect USB device, SD card and HDMI out works too.
I haven't yet tried USB and HDMI at the same time - I'll do it today.

alese said:
Yes, I have tried it with original AC adapter and with Note 10.1 AC adapter - nothing happened in both cases - the dock just doesn't do anything with Note 10, it does work just fine with Note 2.
It's funny though, as I do have another adapter, it's called HDMI Connection kit (http://shop.brando.com/HDTV-Adapter-and-OTG-Card-Reader_p09720c1451d001.html), and that one does work, I can connect USB device, SD card and HDMI out works too.
I haven't yet tried USB and HDMI at the same time - I'll do it today.
Click to expand...
Click to collapse
Interesting! Please let us know if it works. HDMI + USB would be perfect. Could you also try charging it through micro-USB at the same time?

ap27 said:
Interesting! Please let us know if it works. HDMI + USB would be perfect. Could you also try charging it through micro-USB at the same time?
Click to expand...
Click to collapse
Well I have done some tests and it works (mostly).
I'm typing this reply on USB keyboard connected to generic USB HUB, that has also connected USB mouse and an USB flash drive.
Hub is connected to the USB port on the adapter.
I have also HDMI cable connected to the adapter and the whole thing is connected via HDMI2VGA converter to 17" flat screen. Picture is streched but everything works.
The "mostly" part is because the "connection" to USB devices is a bit unstable - sometimes they disconnect and reconnect and especially because you can't charge the tablet at the same time whatever charger I connect it just doesnt charge the device.
I'm guessing Samsung either screwed something or intentionally changed on connection port or in software compared to S3/4 and Note 2/3...

Thats good to know, thanks! I'm not too worried about the charging part since its a tablet. I hope the HDMI can actually output 1080p 30Hz video

Can we have a link for this smart dock please ?

I wonder if this one may work...?
http://www.amazon.com/dp/B0076Z3FU...F8&colid=3Q1HJXOWAXE7M&coliid=I1WUSECYT42V5J
Sent from my SM-P600 using XDA Premium 4 mobile app

luigi37 said:
hi,
could be nice to see if the smart dock (the one with HDMI port, 3 usb ports, etc) manufactured for the galaxy note 2, will be compatible with the tablet note 10.1 2014 edition.
It seems to work on the new note 3 and just wondering if might be the case for the tablet as well. I see that the new tablet has a usb port that looks like the one in the note 3 (even thogh the latter mounts a usb 3 and the tablet a usb 2 as far as I know)
Regards
Click to expand...
Click to collapse
I confirm, this dock doesn't work with galaxy note 10.1 2014. It doesn't make anything, no charge, no USB, no HDMI... But it works perfectly with the note 2...

karlichon said:
I confirm, this dock doesn't work with galaxy note 10.1 2014. It doesn't make anything, no charge, no USB, no HDMI... But it works perfectly with the note 2...
Click to expand...
Click to collapse
....and the Note 3

I would really like charging and HDMI at the same time. Any products verified to do this?
Does anyone have any idea's why the dock doesn't work? Anyone willing to try to force it to work either through an app or even a kernel mod? I think this warrants further investigation.

Does anyone know if the DA-E570 wireless dual dock works with the G-Note 10.1 2014.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

kkretch said:
Does anyone know if the DA-E570 wireless dual dock works with the G-Note 10.1 2014.
Click to expand...
Click to collapse
error

USB sense resistors
The reason why the smart dock does not work on the Note 10.1 2014 is that in different micro USB accessories there are different resistors between pin 4 and 5 in the micro USB connector. The manufacturers can make device specific accessories by making the Android device react on a specific resistor in its accessory. There are other xda-developer threads discussing this, and trying to sort out how to e.g. compose smart docks providing charging to the Android device and using its USB host capabilities to connect USB devices.
One Samsung smart dock seems to have a 40.2 kOhm resistor and work on some Galaxys. But not on Note 10.1 2014.
I have tried all resistor values that are documented to be able to possibly have something to do with dock mode and OTG mode, but the Note 10.1 2014 does not react on any of them except on 40.2 k Ohm. On all other values it just charges and does not accept to use connected USB devices.
Only 40.2 k Ohm shows a slight difference. It shows a red cross over the chargng icon, indicating that it charges slower. But USB to a keyboard does not work.
Only 0 Ohm between pin 4 and 5 causes OTG mode so that USB data devices can be used. But then no charging is accepted by the Note 2014.
Look for xda-developer areas titled "fun with resistors" and "using OTG mode and charging at the same time" for a lot of information but no solution for the Note 10.1 2014.
I have tried the following resistor values:
28.7 k, 34 k, 40.2 k, 49.9 k, 64.9 k, 80.7 k, 100 k, 102 k, 124 k, 200 k, 365 k and 619 k Ohm.
I now just hope that Samsung has some yet unrevealed way to tell the Note 2014 that a new type of smart dock is attached, and that it will be launched soon.
I can imagine one reason for not making the earlier smart dock work with the Note 2014. The Note 2014 uses 5.3 V for charging to make charging more rapid, and Samsung might think it is not really in compliance with the USB specifications to distribute that as well to other USB devices. Just a guess...

Hi All, I'm about to get one of these as the screen of my S4 is broken and Samsung asks too much money to fix it Any developments on getting it to work with Note 10.1 2014?

bump
fastguy said:
Hi All, I'm about to get one of these as the screen of my S4 is broken and Samsung asks too much money to fix it Any developments on getting it to work with Note 10.1 2014?
Click to expand...
Click to collapse
This is the only thing stopping me from buying the Note, has anyone found a smart docking station that charges at the same time?

alese said:
Well I have done some tests and it works (mostly).
I'm typing this reply on USB keyboard connected to generic USB HUB, that has also connected USB mouse and an USB flash drive.
Hub is connected to the USB port on the adapter.
I have also HDMI cable connected to the adapter and the whole thing is connected via HDMI2VGA converter to 17" flat screen. Picture is streched but everything works.
The "mostly" part is because the "connection" to USB devices is a bit unstable - sometimes they disconnect and reconnect and especially because you can't charge the tablet at the same time whatever charger I connect it just doesnt charge the device.
I'm guessing Samsung either screwed something or intentionally changed on connection port or in software compared to S3/4 and Note 2/3...
Click to expand...
Click to collapse
Does it work to charge when you use HDMI/flash drive?
Sent from my SM-G9006V using XDA Free mobile app

Any full featured dock available (HDMI+USB OTG)

Hello,
Have been eyeing the device for a while now. Was planning to get Tab 7.7 earlier, but that screen size cannot be much used for office productivity. So have been summing up the budget for this one.
In my typical usage scenario, I have to keep it upright (for work or for presentations) connected with a bluetooth keyboard/mouse and display output to most common VGA projectors in case of presentations. Also would like at least one, preferably two USB OTG ports to connect my external flash/harddrive or any other accessories.
I believe the USB OTG and HDMI OUT functionality on this tablet is both handled by the MicroUSB connector at the bottom, correct me if I am wrong.
To envisage my needed accessory, is there any dock available, on which the tablet sits in the landscape orientation, connects via microusb connector, keeps charging and outputs the MHL HDMI disaply at the same time. On the back of the dock, supposedly should be the HDMI female connector, USB OTG port(s) and card reader ports. I know for connecting to a VGA projector I also have to use a HDMI male to VGA female adapter.
If such a solution is available, then I can think of it as a useful office productivity tool. I have seen some connectors like http://www.ebay.com/itm/Micro-USB-OTG-SD-TF-Card-Reader-MHL-to-HDMI-TV-Adapter-for-Samsung-Note-2-S3-S4-/271284804413 but in my scenario , for plugging such a connector to tab 10.1, it should be lying flat on the table during any presentation or work, which is not practical and a workable position for anyone.
I have tried looking around but was not able to find such a dock, so thought to have some help from the community here.
Would love your ideas and opinions about it. Thanks for your answers.
=====================================================
An ideal dock like I am describing is available.....but sadly for iPad iPad2 iPhone4 S iPod.....http://www.aliexpress.com/item/Multi-function-Docking-All-in-one-HDMI-VGA-USB-Dock-iPad-iPad2-iPhone4-S-iPod-Stand/543638036.html?.....wish something similar can be made available for Samsung Galaxy Tab/ Galaxy Note series.

I have had my eye on this guy for dock use. Seems to be a good deal as well, compared to the Samsung version.
Qable Powerz Samsung Smart Dock Multimedia Hub
http://www.amazon.com/gp/aw/d/B00FZGUXSI/ref=aw_ls__2?colid=8ROJSLYX35XN&coliid=IN9U996ZNKTZI
My tablet actually docks just fine on my phone charging cradle which is of a similar design, so I would think this will work as well.
Sent from my SM-N900T using Tapatalk

Mr_Armageddon said:
I have had my eye on this guy for dock use. Seems to be a good deal as well, compared to the Samsung version.
Qable Powerz Samsung Smart Dock Multimedia Hub
http://www.amazon.com/gp/aw/d/B00FZGUXSI/ref=aw_ls__2?colid=8ROJSLYX35XN&coliid=IN9U996ZNKTZI
My tablet actually docks just fine on my phone charging cradle which is of a similar design, so I would think this will work as well.
Sent from my SM-N900T using Tapatalk
Click to expand...
Click to collapse
Hi Armageddon,
Thanks for the answer. I actually did my research and almost reached the same product as you have mentioned. Since you own a 10.1 2014 tablet, I believe this tablet does offer the same via standard 11-pin micro USB connector (instead of the propreitary Samsung connector used in earlier models).
I was able to find a couple of smart docks, which are advertised to work with GNII/III and Galaxy S3/S4, all of which I believe do have the 11-pin micro USB MHL connector. Please have a look at the following
http://www.aliexpress.com/item/Smart-Multimedia-Dock-HDMI-USB-Dock-Station-for-Samsung-Galaxy-Note-2-Galaxy-S4-I9500-S3/1439104485.html
http://www.aliexpress.com/item/100-High-Quality-HDMI-Smart-Multimedia-Dock-Charger-Station-Cradle-For-Samsung-Galaxy-Note-2-II/1405399957.html
http://www.aliexpress.com/item/Multimedia-Dock-station-for-Samsung-Galaxy-Note-II-2-N7100-S3-S4-with-audio-out-and/1422156460.html
All of them are advertised to do all the functions simultaneously at the same time , that is "OTG + HDMI + Charging".
I believe the docks i have found and you have mentioned on Amazon are the same , are they ? . I need to know
1. Have you tried this or a similar dock and found all functions to be working simultaneously and satisfactorily.
2. By a long shot, since S3/S4 also have an 11pin micro USB connector, have any of you tried or can comment on whether this dock would work with a Galaxy Note 10.1 2014 tablet. Theoretically and technically , i think it should but need your advice. Would the tablet fit in snug in the connector space given on the dock.
Thanks for reading and your feedback.

Bump
Sent from my SM-N900V using xda app-developers app

souless poet said:
Bump
Sent from my SM-N900V using xda app-developers app
Click to expand...
Click to collapse
Our tablet stay on the note II docks ? It never falls ?

Received the dock today. It works ok with Note 3 (charging, usb keyboard, output to tv) but not with note 10.1 2014. Oh well ...
Sent from my SM-P600 using Tapatalk

It's a pity Samsung doesn't release a Transformer-style tablet/dock combo. Asus keeps having more hardware problems than Samsung, and Samsung seemed happy for a while to try out every possible form factor.
The new Transformer Infinity (TF701T) straight out of the box has all the functionality that OP requests. Unfortunately early batches of the Infinity have had problems with their dock connectors, so to replace my old Transformer Prime I'm seriously thinking of jumping ship and getting a Note 10.1. It seems much better suited for use in tablet mode (smaller bezels, lighter), but I would miss the dock...

rickyt63 said:
Received the dock today. It works ok with Note 3 (charging, usb keyboard, output to tv) but not with note 10.1 2014. Oh well ...
Sent from my SM-P600 using Tapatalk
Click to expand...
Click to collapse
I wonder if the Samsung OEM one like this one works. But I don't know about the $100 price tag.
Sent from my SM-N900T using Tapatalk
---------- Post added at 02:39 AM ---------- Previous post was at 02:38 AM ----------
Mr_Armageddon said:
I have had my eye on this guy for dock use. Seems to be a good deal as well, compared to the Samsung version.
Qable Powerz Samsung Smart Dock Multimedia Hub
http://www.amazon.com/gp/aw/d/B00FZGUXSI/ref=aw_ls__2?colid=8ROJSLYX35XN&coliid=IN9U996ZNKTZI
My tablet actually docks just fine on my phone charging cradle which is of a similar design, so I would think this will work as well.
Sent from my SM-N900T using Tapatalk
Click to expand...
Click to collapse
I was eyeing this one as well which is cheaper than the OEM it copies.
Sent from my SM-N900T using Tapatalk

It's only a 5pin(actually 4) connector. Such a dock should be possible with a switch to manually change between usb/hdmi/cardreader etc.

Anyone found anything that works?
Tested 2 docks from DX, so far kinda mixed results
one works kinda, has 2 x usb and both work, hdmi seems to output only at 720 p I think ( best way to check ??anyone??) , BUT charging isn't working it seems ( still testing, maybe trickle charge))
http://dx.com/p/5v-1000mah-mhl-otg-...on-for-samsung-i9300-i9500-n7100-black-238004
The other one
http://dx.com/p/mhl-to-hdmi-otg-card-reader-for-samsung-i9300-i9500-n7100-n5100-p3200-238273
The usb seems to work fine, same issue with charging, and I can't seem to get the HDMI to work, still working and testing on the last part
The ideal would be usb otg + charge ( would be nice if the charging wasn't mandatory ) + hdmi
Anyone found anything they can confirm works?

I think you cannot get 2A charging current while using usb for data. Probably data mode is limited to 500mA, or 900mA.

Samsung is releasing an ethernet adapter with 2 usb ports for the Nok Pro 12.2 if it's micro usb 2.0 it should work with our tablet
Sent from my SM-P600 using XDA Premium 4 mobile app

where did you hear that, link?
Would be great if true ...

DeBoX said:
where did you hear that, link?
Would be great if true ...
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
not a dock...

Wow, wicked !!! Did you happen to notice release date? Any product links?

Any news on that? Does it charge while using the usb-ports?

Has anyone tried one of the smart docks for the S3/4 and Note phones?
I'm going to go out on a limb and just try a OTG cable in one of the USB ports on the side and assume it might work.

this Lindy Dock looks like it has all the right specs including 2a power
Dock Port : 1 x USB Micro-B 11-pin (Male)
USB Device Port: 3 x USB Type A (Female)
Video Output: 1 x HDMI (Female)
Power Input: USB Micro B type (Female)
Power LED Indication:
Red = Charging Mode
Blue = Active Mode
USB Port: USB 2.0 High Speed 480 Mbps
Power Voltage Support: DC 5V/2A (Micro B type)
HDMI Resolution (Max): 1920 x 1080p @ 60Hz
Operating Temperature: 00C - 400C
Storage Temperature: 00C - 600C
Weight: 59g
Dimension: (LxWxH) 91.8 x 60 x 12mm
the problem is they dont ship to the US or i would order one right now as it has everything i have been looking for. i also searched and searched and find it for sale anywhere else

USA Store
http://www.lindy-usa.com/smartphone-docking-station-73391.html
fletch33 said:
this Lindy Dock looks like it has all the right specs including 2a power
Dock Port : 1 x USB Micro-B 11-pin (Male)
USB Device Port: 3 x USB Type A (Female)
Video Output: 1 x HDMI (Female)
Power Input: USB Micro B type (Female)
Power LED Indication:
Red = Charging Mode
Blue = Active Mode
USB Port: USB 2.0 High Speed 480 Mbps
Power Voltage Support: DC 5V/2A (Micro B type)
HDMI Resolution (Max): 1920 x 1080p @ 60Hz
Operating Temperature: 00C - 400C
Storage Temperature: 00C - 600C
Weight: 59g
Dimension: (LxWxH) 91.8 x 60 x 12mm
the problem is they dont ship to the US or i would order one right now as it has everything i have been looking for. i also searched and searched and find it for sale anywhere else
Click to expand...
Click to collapse

tamuin said:
http://www.lindy-usa.com/smartphone-docking-station-73391.html
Click to expand...
Click to collapse
haha was 2 minutes away from posting:
found the Lindy online at their US store since i couldnt order from the UK site. you can see it here but i had to search part number to find it and no info was listed so you have to use the UK site to read up on it.
will report back on results after it arives
Thanks
UPDATE - they are going to take a few extra day to get it to me as they dont have it in the US and have to ship it to US then to me

Connecting USB storage Drive and HDMI out

Hi I just recently purchased the Samsung galaxy tab s 8.4. What I am wondering is how can I connect a full size usb flash drive? Can I buy any old cheap usb to micro usb adapter and it should work? Or do I need some sort of special type.
I was also wondering how I can get video out onto a TV through the HDMI port. Will any micro HDMI to full HDMI work? Or do I need a specific special type.
Thanks in advance for any help or input related to this.

Buy a media dock to use both mhl and otg simultaneously or an otg adapter for flash drives and a Samsung specific mhl/HDMI cable for video out.
Sent from my SM-P600 using XDA Premium HD app

I've been using one like this...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Samsung Galaxy S4
Samsung Galaxy Note 3
Samsung Galaxy Tab Pro 8.4
Samsung Galaxy Tab S 10.5
All working with HDMI out ... card reader ... USB to 1 Terabyte Hard drive ... USB to Sony DualShock gamepad ... USB Mouse ... USB keyboard ... (and various combinations of these components plugged in and working simultaneously)

siralsmooth said:
Buy a media dock to use both mhl and otg simultaneously or an otg adapter for flash drives and a Samsung specific mhl/HDMI cable for video out.
Sent from my SM-P600 using XDA Premium HD app
Click to expand...
Click to collapse
Im sorry but i don't exactly know what your talking about when you say media dock.
Can I buy any micro USB to HDMI adapter and a micro USB to USB adapter Or do I need specific cables straight from samsung? Theres several of these cables being sold at my local NCIX computer store. This forum will not allow me to post the links however.

408
b00mb00mchuck said:
I've been using one like this...
Samsung Galaxy S4
Samsung Galaxy Note 3
Samsung Galaxy Tab Pro 8.4
Samsung Galaxy Tab S 10.5
All working with HDMI out ... card reader ... USB to 1 Terabyte Hard drive ... USB to Sony DualShock gamepad ... USB Mouse ... USB keyboard ... (and various combinations of these components plugged in and working simultaneously)
Click to expand...
Click to collapse
Thats exactly what im looking for. How much does that run? Do you have a link for it?

xmilar said:
Thats exactly what im looking for. How much does that run? Do you have a link for it?
Click to expand...
Click to collapse
Got mine off eBay....
eBay LINK ... MHL OTG Hub
Link to full eBay search... (choices bro)
.
.
.
I also use one like this at work... (don't need MHL there)
eBay link ... OTG Hub
It has 3 USB ports and several different card readers... I can run that with a 1 Terabyte Hard drive, 256GB Flash Drive , 128GB micro SD card , wireless keyboard and mouse... all running off that hub simultaneously.... all working as they should.
Pro Tip... Always use the MHL/OTG Power input when running powered devices... DON'T try to power from your tablet...
The first item I listed in this post (MHL OTG Hub) has a micro USB port... plug your Samsung charger in there before plugging in any other devices and before plugging into your tablet
The second item has its own dedicated power cord supplied with the device which can also be plugged into your Sammy charger to run the power side of the hub...
Failure to do this can burn out the 5 volt rail on your tablet... you will also notice all sorts of problems with devices not being recognized by the tablet when external power is not plugged into the proper port on the hub.
Many of these "hubs" come from China with sketchy instructions... they try but it gets lost in translation I suppose.
Here's what I learned over time...
when using a hard drive or wireless keyboard with a hub
plug in your external power to the hub first
then plug in your hard drive or wireless keyboard/mouse dongle
then plug the hub into the tablet
If you do things in the wrong order the tablet doesn't recognize the drive or device
Those steps are not necessary for memory cards and flash drives.

b00mb00mchuck said:
Got mine off eBay....
Click to expand...
Click to collapse
This post helped me a lot man I really appreciate it. I have been driving myself crazy trying to figure out what to buy what works etc. I just dont know which ones will work for the tab S considering it doesnt specifically say the Tab S is supported..
All im really looking to do is stream videos to my tv when I travel and connect a standard size usb flash drive. Thanks again ill probably just order that 1st one you linked me to because you say it works fine.
On a side note it kinda sucks how I cant even quote your post and reply without getting this message
"To prevent spam on the XDA forums, ALL new users prevented from posting outside links in their messages. After approximately 10 posts, you will be able to post outside links. Thank you for understanding!"

Glad to help
That quote thing will go away soon enough... XDA's way of discouraging crap posters from constantly bombing the forum
(Cool story)
Brought my Note 3 to a work function in Honolulu... used that MHL OTG Hub to attach to the flat screen in the conference room and show some pics and videos and web pages for a Heavy Lift Crane presentation... meeting broke up and groups went to other promo areas... some of the geeks mulled around looking at what i had set up and saw me answering emails and posting on a couple forums... then on break i started playing Grand Theft Auto with the Playstation 3 controller... that started a bunch of questions ... i answered what i could ... one dude says ... "damn... i wanna punch my iPhone right in the friggin face right now"
:good:

b00mb00mchuck said:
Glad to help
That quote thing will go away soon enough... XDA's way of discouraging crap posters from constantly bombing the forum
(Cool story)
Brought my Note 3 to a work function in Honolulu... used that MHL OTG Hub to attach to the flat screen in the conference room and show some pics and videos and web pages for a Heavy Lift Crane presentation... meeting broke up and groups went to other promo areas... some of the geeks mulled around looking at what i had set up and saw me answering emails and posting on a couple forums... then on break i started playing Grand Theft Auto with the Playstation 3 controller... that started a bunch of questions ... i answered what i could ... one dude says ... "damn... i wanna punch my iPhone right in the friggin face right now"
:good:
Click to expand...
Click to collapse
Thats awesome its definitely a handy cord to have.
I was wondering if you know should pretty much any mhl otg hub work with the Tab S? There is several listed on eBay with various prices. Are all of them made equal? or is it possible that certain ones wont work. Ill probably just order the one you linked because you have confirmed it does in fact work with the Tab S even though its not listed as a compatible device.

xmilar said:
Thats awesome its definitely a handy cord to have.
I was wondering if you know should pretty much any mhl otg hub work with the Tab S? There is several listed on eBay with various prices. Are all of them made equal? or is it possible that certain ones wont work. Ill probably just order the one you linked because you have confirmed it does in fact work with the Tab S even though its not listed as a compatible device.
Click to expand...
Click to collapse
Works... i used it just a couple hours ago to dump movie downloads onto my hard drive and clear up memory...
But now that you mention it... i haven't tried the MHL function to HDMI with the Tab S yet because i have chromecast now and I'll mostly stream from the hard drive right through to the chromecast.... i can test that tomorrow if you want a rock solid answer before you buy... i have a half day on the crane tomorrow so it would be after 12:00pm EST when i get home and try plugging it all in.

Any of the newer Samsung devices from the s2/note2 and up should have the dual functionality USB port. You can, with a good eye, and good lighting, look at the port and see the 2nd row of pins. If it has/supports mhl out, it will do simultaneous otg as well. This is exclusive to Samsung devices.
Sent from my SM-P600 using XDA Premium HD app

b00mb00mchuck said:
Works... i used it just a couple hours ago to dump movie downloads onto my hard drive and clear up memory...
But now that you mention it... i haven't tried the MHL function to HDMI with the Tab S yet because i have chromecast now and I'll mostly stream from the hard drive right through to the chromecast.... i can test that tomorrow if you want a rock solid answer before you buy... i have a half day on the crane tomorrow so it would be after 12:00pm EST when i get home and try plugging it all in.
Click to expand...
Click to collapse
Ya that would be great if you could thanks a lot i really appreciate it.

xmilar said:
Ya that would be great if you could thanks a lot i really appreciate it.
Click to expand...
Click to collapse
There ya go bro... hooked up with MHL Hub to HDMI showing screen mirror of this thread... everything works like it should.

b00mb00mchuck said:
There ya go bro... hooked up with MHL Hub to HDMI showing screen mirror of this thread... everything works like it should.
Click to expand...
Click to collapse
Looks good man thanks a lot for that. Theres a few other ones on Amazon for cheaper that might work but I think ill just stick with this one even though ill pay a few extra bucks.:good:

b00mb00mchuck said:
There ya go bro... hooked up with MHL Hub to HDMI showing screen mirror of this thread... everything works like it should.
]
Click to expand...
Click to collapse
Hey man I just received my adapter in the mail today but the HDMI out is not working do you have any mtips on how to get it to work? I connect my power source first and then connect my HDMI but still nothing works. I bought the one you mentioned but its a bit different from what you have pictured. Any help is greatly appreciated.
Edit*
Ok I finally got it working. I had to connect my device to it first before the power source or it wouldn't work. I know you mentioned this can be hard on the battery but its the only way I got it working.
I connect my power source after the HDMI out is up and running but my battery seems to still be draining fairly quick. Does that mean the outside power source is doing nothing? Am I doing harm to my tablets battery?

hello, im thinking about buy one of these, my question is, does that white cable charge the device?
cause i want to charge the device while using this function, can anyone confirm this, and in case it doesnt charge, can we mod it to do it