Related
Hi guys
After installing new version of Android 4.4 I've managed to install all gapps but now I can't do factory reset.The phone stuck into Huawei logo.Also I have same problem if I want to enter in recovery.
ulise73 said:
Hi guys
After installing new version of Android 4.4 I've managed to install all gapps but now I can't do factory reset.The phone stuck into Huawei logo.Also I have same problem if I want to enter in recovery.
Click to expand...
Click to collapse
You need to reflash stock recovery...
Use the recovery found in this file:
http://www.androidfilehost.com/?fid=23252070760973876
Extract from the zip and flash using fastboot commands.
jimbo77 said:
You need to reflash stock recovery...
Use the recovery found in this file:
http://www.androidfilehost.com/?fid=23252070760973876
Extract from the zip and flash using fastboot commands.
Click to expand...
Click to collapse
maybe I'm a noob and you can help:how can I do fastboot commands?Thanks again!
ulise73 said:
maybe I'm a noob and you can help:how can I do fastboot commands?Thanks again!
Click to expand...
Click to collapse
Sure...
Download this file and extract it anywhere your computer...
Right click anywhere inside the folder holding the shift key and click on "Open command window here", after this a cmd window will appear...
Connect your phone and type:
adb devices
if you see an output showing your phone type
adb reboot bootloader
the phone will boot to Huawei Logo, then type:
fastboot flash recovery recovery.img
after it completes the process type
fastboot reboot
and after that you'll be able to perform a factory reset...
jimbo77 said:
Sure...
Download this file and extract it anywhere your computer...
Right click anywhere inside the folder holding the shift key and click on "Open command window here", after this a cmd window will appear...
Connect your phone and type:
adb devices
if you see an output showing your phone type
adb reboot bootloader
the phone will boot to Huawei Logo, then type:
fastboot flash recovery recovery.img
after it completes the process type
fastboot reboot
and after that you'll be able to perform a factory reset...
Click to expand...
Click to collapse
hi,
i have the same problem, i tried your solution, but it didn't work
the huawei logo is on all the time, when i reset by pressing the on/off button several seconds, it start, en keeps restart. till the logo upears, en than it stops. not reconized trough usb, and not to turn off...
sorry for my bad english
Press the power button and volume up/down at the same time, for several seconds, you should enter stock recovery.
If you don't have the update.app in your dload folder remove the sdcard, insert it into a sd adaptor,put it on your pc/laptop and copy the update.app into dload folder.
ZuperStyler said:
Press the power button and volume up/down at the same time, for several seconds, you should enter stock recovery.
If you don't have the update.app in your dload folder remove the sdcard, insert it into a sd adaptor,put it on your pc/laptop and copy the update.app into dload folder.
Click to expand...
Click to collapse
tried it, but the pc doesn't reconize my phone, i can not execute adb commands. i tried it, but he keeps searching for devices.
en by pressing the 3 buttons, my phone turns off and on, and stops at the huawei ascend logo
and this screens keeps showing, till my battery is empty.
cowe said:
tried it, but the pc doesn't reconize my phone, i can not execute adb commands. i tried it, but he keeps searching for devices.
en by pressing the 3 buttons, my phone turns off and on, and stops at the huawei ascend logo
and this screens keeps showing, till my battery is empty.
Click to expand...
Click to collapse
Install the drivers, or open HiSuite, that should do it.
I tried to do that. cmd but it says:
adb server did not ack
unkown host service.
jimbo77 said:
Sure...
Download this file and extract it anywhere your computer...
Right click anywhere inside the folder holding the shift key and click on "Open command window here", after this a cmd window will appear...
Connect your phone and type:
adb devices
if you see an output showing your phone type
adb reboot bootloader
the phone will boot to Huawei Logo, then type:
fastboot flash recovery recovery.img
after it completes the process type
fastboot reboot
and after that you'll be able to perform a factory reset...
Click to expand...
Click to collapse
im having the same problem my phone still stuck at logo for a week now please help I updated to b125 .I have pressed power buttons vol up nd down it just restarts and stuck at logo downloaded the "Stock_boot&recovery_B118" opend command but when I type "adb devices " it says adb is not recognized as a internal or external operable program or ,batch file
I have opend the cmd while hi suite is open but nothing seems to be working for me .also I have put update in dload folder in sdcard but its not reading that .
Very gratefull for any solutions I haven't tryd pliz ....also @jimbo77 wanted to ask is there a a stock boot and recovery for B125 not the one I have
iscaac said:
im having the same problem my phone still stuck at logo for a week now please help I updated to b125 .I have pressed power buttons vol up nd down it just restarts and stuck at logo downloaded the "Stock_boot&recovery_B118" opend command but when I type "adb devices " it says adb is not recognized as a internal or external operable program or ,batch file
I have opend the cmd while hi suite is open but nothing seems to be working for me .also I have put update in dload folder in sdcard but its not reading that .
Very gratefull for any solutions I haven't tryd pliz ....also @jimbo77 wanted to ask is there a a stock boot and recovery for B125 not the one I have
Click to expand...
Click to collapse
If you phone stuck at boot adb will not work. Type fastboot devices. It will show ???? Device found. Then type fastboot comands to install recovery or boot.
Sent from my P6-U06 using xda app-developers app
husen4u said:
If you phone stuck at boot adb will not work. Type fastboot devices. It will show ???? Device found. Then type fastboot comands to install recovery or boot.
Sent from my P6-U06 using xda app-developers app
Click to expand...
Click to collapse
is there something im doing wrong here HELP PLEASE
iscaac said:
is there something im doing wrong here HELP PLEASE
Click to expand...
Click to collapse
Yep. You are doing it wrong...
In the zip file you downloaded there are two files:
1.- boot.img
2.- recovery.img
Now you need to follow this guide to flash them to your phone:
http://forum.xda-developers.com/showthread.php?t=2636231
Since your phone is not booting instead of following the adb commands you need to push both volume - and Power Buttons at the same time while you plug the usb cable to enter fastboot mode.
Once in fastboot mode follow the guide (from step 4 onwards) to flash the kernel (boot.img) and stock recovery (recovery.img)
Once you have flashed both, put any ROM in the dload folder of your external SDCARD. and then reboot the phone using the 3 button combo (Volume + , VOlume - and Power Button) Note that the phone needs to be unplugged from the computer...
jimbo77 said:
Yep. You are doing it wrong...
In the zip file you downloaded there are two files:
1.- boot.img
2.- recovery.img
Now you need to follow this guide to flash them to your phone:
http://forum.xda-developers.com/showthread.php?t=2636231
Since your phone is not booting instead of following the adb commands you need to push both volume - and Power Buttons at the same time while you plug the usb cable to enter fastboot mode.
Once in fastboot mode follow the guide (from step 4 onwards) to flash the kernel (boot.img) and stock recovery (recovery.img)
Once you have flashed both, put any ROM in the dload folder of your external SDCARD. and then reboot the phone using the 3 button combo (Volume + , VOlume - and Power Button) Note that the phone needs to be unplugged from the computer...
Click to expand...
Click to collapse
I still get same error message when I try to flash kernel and recovery
=> Install the Universal Android USB Driver from the link below:
http://adbdriver.com/upload/AdbDriverInstaller.exe
=> Download and install ADB and Fast Boot from thebelow link.
http://fs1.d-h.st/download/00103/KIP/adb-setup-1.2.exe
=> Extract the Stock ROM using the Tool "Huawei Update Extractor" in the computer.
=>"HuaweiUpdateExtractor download link:
http://dl.xda-developers.com/attachdl/a0f6b6cc9f19468bb6c24278361a3044/532549ec/2/6/3/0/2/4/2/HuaweiUpdateExtractor_0.9.7.9_Setup.zip
=> Copy and paste the Stock/TWRP Recovery and BOOT.img in the "ADB and Fast Boot" folder.
=> Connect the HAM to the computer using the supplied USB cable.
=> Press and hold the Power and Volume Down button.
=> HAM will be recognized as ABD device.
=> Leave the Power and Volume Down button.
=> Double click to open the installed "ADB and Fast Boot" from the Desktop or open the computer prompt to access the "ADB and Fast Boot" folder.
=> In the ADB and Fast Boot prompt:
=> Type: fastboot reboot-bootloader.
=> Type: fastboot flash BOOT BOOT.img
=> Type fastboot flash RECOVERY RECOVERY.img
Fastboot will flash the image and give you a success/failure notification. If successful, you're all set.
Finally, press and hold the Power button. HAM will boot now
fastboot: that's the executable tool
flash: that's the function we want the fastboot tool to perform
recovery: this is the name of the partition we want to flash into. since we are flashing a recovery image, it needs to go to the recovery partition.
recovery.img: this is the name of the actual file to flash. Your file name may be different. Just make sure it matches the actual file name.
i can't download Huawei Update Extractor
Azharla08 said:
=> Install the Universal Android USB Driver from the link below:
http://adbdriver.com/upload/AdbDriverInstaller.exe
=> Download and install ADB and Fast Boot from thebelow link.
http://fs1.d-h.st/download/00103/KIP/adb-setup-1.2.exe
=> Extract the Stock ROM using the Tool "Huawei Update Extractor" in the computer.
=>"HuaweiUpdateExtractor download link:
http://dl.xda-developers.com/attachdl/07eee0ca707d998e0074fe7066df2e1b/5324e778/2/6/3/0/2/4/2/HuaweiUpdateExtractor_0.9.7.9_Setup.zip
=> Copy and paste the Stock/TWRP Recovery and BOOT.img in the "ADB and Fast Boot" folder.
=> Connect the HAM to the computer using the supplied USB cable.
=> Press and hold the Power and Volume Down button.
=> HAM will be recognized as ABD device.
=> Leave the Power and Volume Down button.
=> Double click to open the installed "ADB and Fast Boot" from the Desktop or open the computer prompt to access the "ADB and Fast Boot" folder.
=> In the ADB and Fast Boot prompt:
=> Type: fastboot reboot-bootloader.
=> Type: fastboot flash BOOT BOOT.img
=> Type fastboot flash RECOVERY RECOVERY.img
Fastboot will flash the image and give you a success/failure notification. If successful, you're all set.
Finally, press and hold the Power button. HAM will boot now
fastboot: that's the executable tool
flash: that's the function we want the fastboot tool to perform
recovery: this is the name of the partition we want to flash into. since we are flashing a recovery image, it needs to go to the recovery partition.
recovery.img: this is the name of the actual file to flash. Your file name may be different. Just make sure it matches the actual file name.
Click to expand...
Click to collapse
i can't download Huawei Update Extractor,there is something wrong with the link?
enlove said:
i can't download huawei update extractor,there is something wrong with the link?
Click to expand...
Click to collapse
link updated
Azharla08 said:
link updated
Click to expand...
Click to collapse
i can't download also
enlove said:
i can't download also
Click to expand...
Click to collapse
Get it from here
http://forum.xda-developers.com/showthread.php?t=2433454
svvv said:
Get it from here
http://forum.xda-developers.com/showthread.php?t=2433454
Click to expand...
Click to collapse
thinks!
can i use this to huawei y320-u10
because i tried to go to recovery mode and it pops out to android laying down and saying no command
kllnn8 said:
can i use this to huawei y320-u10
because i tried to go to recovery mode and it pops out to android laying down and saying no command
Click to expand...
Click to collapse
Yes you can do it provided if you have update.app file for your mobile and boot.img/recovery.img extracted from your update.app
where can i find update.app for huawei y320-u10?
Huawei ascend mate -
I rooted the device few days back and i also intastalled few fonts and was working like charm, i wanted to change the font and downloaded new font, apply -- restart--- disaster.... gone.. Now my PHONE is not starting up .. it stays awake in start up screen.. i tried Hard RESET .. but there were no files in cache as well recovery ..when i try to charge the update.app into sd in recovery mode, the phone don't see the file inside...plz help me.
No help for me? Please, i'm desperate.....
cloche said:
No help for me? Please, i'm desperate.....
Click to expand...
Click to collapse
Jus try this rom http://forum.xda-developers.com/showthread.php?t=2688699
Its b923 emui 2.0 beta version
Install as per the steps provided in the link
Make sure you put ur phone in Bootloader mode(Power + Vol down) before executing the .bat file.
Once installed and booted to OS copy the update.app file to dload folder in ur external sdcard goto settings and update using local mode that should install automatically.
But I cannot make the phone in USB debugging if it's stuck........and another thing.......I don't have the bootloader unlocker....
cloche said:
But I cannot make the phone in USB debugging if it's stuck........and another thing.......I don't have the bootloader unlocker....
Click to expand...
Click to collapse
Just put the mobile in bootloader mode and run the bat file. No need to enable debugging mode.
ignore first three installation steps in the above link...u start from step 4
no need to have unlocked bootloader
Many many Thanks for your help,
but I can not enter in bootloader mode, if i press vol down and power the phone remains with the written "Huawei Ascend".....instead i have no problem to enter in recovery with vol up + down + power.......i do not understand why.....
cloche said:
Many many Thanks for your help,
but I can not enter in bootloader mode, if i press vol down and power the phone remains with the written "Huawei Ascend".....instead i have no problem to enter in recovery with vol up + down + power.......i do not understand why.....
Click to expand...
Click to collapse
Press and hold the Power button and then press and hold the volume UP button to enter into fast recovery mode.
Then, download and extract the file Bootloader unlock from the link "http://goo.im/devs/joestone/Mate/MT1_BL_unlock.EXE" and Flash the files in fastboot.
Doesnt' work for me...
Out an errore message, Can not find the unlock.bat file...
cloche said:
Many many Thanks for your help,
but I can not enter in bootloader mode, if i press vol down and power the phone remains with the written "Huawei Ascend".....instead i have no problem to enter in recovery with vol up + down + power.......i do not understand why.....
Click to expand...
Click to collapse
first u have to connect the USB cable then switch off the mobile, now press the power button along with the volume down button the screen should say Huawei Ascend and will stay in that screen. Make sure all the drivers are installed only then it will get detected in ur PC check the Device manager in ur PC for android device if its there then ur mobile is detected. After all these steps execute the batch file.
MY FRIEND!!!!!!!!!!!!!!
The phone it's running now!!!!!!!!!
But actually i have a 4.2.2. chinese rom.........how i made to put the stock firm???
Thanks in advance, your are the best!!!!!!
cloche said:
MY FRIEND!!!!!!!!!!!!!!
The phone it's running now!!!!!!!!!
But actually i have a 4.2.2. chinese rom.........how i made to put the stock firm???
Thanks in advance, your are the best!!!!!!
Click to expand...
Click to collapse
Thats great...
Jus copy the update.app file to dload folder in ur external sdcard goto settings->about and update using local mode that should install automatically.
100% Tested Stock Firmware of LeTv Le1S x507&x509 Indian Version
5.5.014s
How To Flash
Follow this...
Extract "X507_Stock_Rom.rar" and install MTK_USB_Windows_Driver drivers inside rar file
1. Goto "SP_Flash_Tool" folder and open "flash_tool.exe"
2. Select "Download-Agent" as "MTK_AllInOne_DA"
3. Select "Scatter file" from "X507_Stock_Rom" folder
now all files will be selected.
4. Change "Download Only" to " Firmware Upgrade"
5. Now Very Imp Step Press together Ctrl+Alt+S
This will Enable "Security Mode" and "Authentication File"
option will be Visible below "Scatter file" option.
6. Now Click on "Auth File" Option and Select "auth_sv5.auth"
file From SP_Flash_Tool" Folder
7. Hit "Download" Button.
8. Press volume up key and
Connect USB cable to mobile in Powered Off Condition
Firmware x507&x509 5.5.014s:-
https://drive.google.com/uc?id=0B2Ddi-DetFSLRjJrSk9abmM4Tms&export=download
Sp Tool:-
https://drive.google.com/file/d/0B5KBP3GG99Q2QUF1VjFmQWs5TFE/view
Mtk Preloder Driver:-
https://drive.google.com/file/d/0By_LtpUoEtFzUDNZLW9JeHhhNnc/view
Video Guide:-
https://www.youtube.com/watch?v=cUijr0JXl8c
Hit thanks if u like my work.........................
after flash this file now phone is total dead , not connected to pc only red light when plug usb or charger
Followed everything, but not able to install recovery
https://ibb.co/kfvxa5
I GOT THIS ERROR..............................................
jagdish1747 said:
after flash this file now phone is total dead , not connected to pc only red light when plug usb or charger
Click to expand...
Click to collapse
Go to fastboot .connect pc
Enter fastboot -w
it will wipe everything thing including data
Reboot to fastboot again
Connect pc
Enter fastboot flash recovery recovery.img (download any recovery)
Reboot to recovery ..flash any os zip
Use volume down+power for fastboot
Use volume up+power for recovery
Where should i enter fastboot -w ???
Kiranshyd said:
Where should i enter fastboot -w ???
Click to expand...
Click to collapse
Vol down+power it will open fastboot mode ..connect usb
If u have mfastboot files open that folder and open cmd from there
If fastboot unlocked u can use fastboot -w directly orelse u have to unlock it first
Need guide regarding fastboot and files u can google them or xda ...
Ubd debugging not enabled, mobile dead
light, it means usb debugging not enabled now, so fastboot command will work or not?? If works, how, wat to do., Please explain bro
---------- Post added at 09:01 AM ---------- Previous post was at 09:00 AM ----------
joshi1 said:
Vol down+power it will open fastboot mode ..connect usb
If u have mfastboot files open that folder and open cmd from there
If fastboot unlocked u can use fastboot -w directly orelse u have to unlock it first
Need guide regarding fastboot and files u can google them or xda ...
Click to expand...
Click to collapse
My mobile dead, only red light coming, it means usb debugging not enabled now, so fastboot command will work or not?? If works, how, wat to do., Please explain bro
https://docs.google.com/file/d/0B2ghGhwyFr5hOWxvZWdBR3VkRlE/view
Download this and extract to your desktop go to the folder
Hold left shift+ right click mouse u will get open command here it will open command window
Disconnect pc and mobile.
Switchoff mobile
Hold volume down +power u will enter fastboot mode
Connect pc now ... Pc will download drivers and install
If u never heard of oem lock ... First install adb drivers from here https://drive.google.com/file/d/0B8HspVLwTTxtWWJsYnNJR2kxeEE/view
Then preloader by this guide
https://forum.xda-developers.com/showthread.php?t=2180436
Now open command prompt .. type
fastboot devices
U will get ur mobile there
Type
Fastboot oem unlock
It will unlock ur device ..
Then type
Fastboot -w
It will wipe everything
Download twrp.img from forum and rename it as recovery
https://dl.twrp.me/x3/twrp-3.1.1-0-x3.img.html
Place it in the same folder of fastboot
Type
Fastboot flash recovery recovery.img
It will show writing done or okay
Now hold volume up+power this will lead u to recovery
Download any rom and flash it
Thanks , My device is X500. Can i flash it?
I am on custom rom (AOKP) , rooted with TWRP.
Is there any way to flash the Stock ROM directly from TWRP ?
hypermaster said:
I am on custom rom (AOKP) , rooted with TWRP.
Is there any way to flash the Stock ROM directly from TWRP ?
Click to expand...
Click to collapse
Yes change updater script or just find 19s twrp flashable file
phone is dead after flash model x509
nrisnadeem said:
phone is dead after flash model x509
Click to expand...
Click to collapse
Cool, now buy a new phone
mannuelectronics said:
https://ibb.co/kfvxa5
I GOT THIS ERROR..............................................
Click to expand...
Click to collapse
getting same error
My display is not working, it won't respond to touch. I successfully flashed the ROM twice but the problem is still there.please help.
PS- I recently changed my screen while I was on a custom ROM. Does thatchange anything?
Sanjay354 said:
My display is not working, it won't respond to touch. I successfully flashed the ROM twice but the problem is still there.please help.
PS- I recently changed my screen while I was on a custom ROM. Does thatchange anything?
Click to expand...
Click to collapse
Your screen is the problem. 3rd Party displays
Abhi_ said:
Your screen is the problem. 3rd Party displays
Click to expand...
Click to collapse
------------------------------------------------------------------------------------
any idea on how to solve it? {im thinking i might be able to use my phone with a mouse and otg,although i haven't tried it yet}
Help
i am currently on Eui 5.5.014s and cannot update to latest Eui version please help !!!!!!!!!
NO Update Coming
naeem210 said:
100% Tested Stock Firmware of LeTv Le1S x507&x509 Indian Version
5.5.014s
How To Flash
Follow this...
Extract "X507_Stock_Rom.rar" and install MTK_USB_Windows_Driver drivers inside rar file
1. Goto "SP_Flash_Tool" folder and open "flash_tool.exe"
2. Select "Download-Agent" as "MTK_AllInOne_DA"
3. Select "Scatter file" from "X507_Stock_Rom" folder
now all files will be selected.
4. Change "Download Only" to " Firmware Upgrade"
5. Now Very Imp Step Press together Cntl+Alt+S
This will Enable "Security Mode" and "Authentication File"
option will be Visible below "Scatter file" option.
6. Now Click on "Auth File" Option and Select "auth_sv5.auth"
file From SP_Flash_Tool" Folder
7. Hit "Download" Button.
8. Press volume up key and
Connect USB cable to mobile in Powered Off Condition90
Firmware x507&x509 5.5.014s:-
https://drive.google.com/uc?id=0B2Ddi-DetFSLRjJrSk9abmM4Tms&export=download
Sp Tool:-
https://drive.google.com/file/d/0B5KBP3GG99Q2QUF1VjFmQWs5TFE/view
Mtk Preloder Driver:-
https://drive.google.com/file/d/0By_LtpUoEtFzUDNZLW9JeHhhNnc/view
Video Guide:-
https://www.youtube.com/watch?v=cUijr0JXl8c
Hit thanks if u like my work.........................
Click to expand...
Click to collapse
Can Anyone tell me why there is no update coming or when i try to install the update from the recovery of local update it says Failed to update -- cause : error with signature help me i want to update eui 5.5 to 5.8 pls
Hello everyone. Asus have recently released the bootloader unlocker for zenfone 4 selfie lite. So guys its time for the pro users to switch to custom roms according to their choice. If you want the bootloader unlocker then download it from the link below:
ZENFONE 4 SELFIE LITE BOOTLOADER UNLOCKER
stock recovery
plz upload the stock recovery for zenfone 4 selfie lite.. i need it
Help me, how to install twrp. On my zb553kl
Help me, how to install twrp. On my zb553kl
snoopy_042981 said:
Help me, how to install twrp. On my zb553kl
Click to expand...
Click to collapse
Note: This will void the warranty of your device and can also brick your device. Do it at your own risk.
Step 1: Download adb and fastboot in your pc and install it.
Step 2: Turn on developer options in your phone.(Go to SETTINGS>ABOUT>SOFTWARE INFORMATION. Then keep on tapping build number until a toast notification says "YOU ARE NOW DEVELOPER").
Step 3: Turn on USB Debugging. (Go to SETTINGS>DEVELOPER OPTIONS and turn on USB DEBUGGING.
Step 4: Connect it to your pc and authorize your pc to have usb debugging access.
Step 4: Download the bootloader unlocker apk . Open the folder where you have downloaded the apk. Rename the apk to unlocker.apk. Then type in the address bar of the file explorer "CMD" and press enter. This will open a command terminal. Then type the given code in the terminal an press enter. Then close all file explorer and the command terminal
Code:
adb install unlocker.apk
Step 5: Download TWRP Recovery ZD553KL or ZB553KL (Still not avilable). Open the folder where you have downloaded the img file. Rename it to recovery.img. Then type the given code in the terminal an press enter. Then close all file explorer and the command terminal.
Step 6: Press and hold volume up button+power button until your phone gets switch off. Then it will reboot to fastboot mode.
Step 7: NOTE: Now since ZB553KL dosent have an Official version of twrp. So it is recommended to use temporary booting of recovery. Though I will provide both the codes.
Type this command for temporary booting of twrp recovery.
Code:
fastboot boot recovery.img
This will boot the phone in to twrp recovery mode. After you reboot it will get back to your stock recovery. [It is recommended to back up system, recovery and boot partition of your device using this temporary recovery boot. Coz if you ever want to go back to stock rom you must have stock recovery. ]
Type this command for permanently setting twrp recovery as recovery.
Code:
fastboot flash recovery recovery.img
snoopy_042981 said:
Help me, how to install twrp. On my zb553kl
Click to expand...
Click to collapse
Step 1: Download adb and fastboot in your pc and install it.
Step 2: Turn on developer options in your phone.(Go to SETTINGS>ABOUT>SOFTWARE INFORMATION. Then keep on tapping build number until a toast notification says "YOU ARE NOW DEVELOPER").
Step 3: Turn on USB Debugging. (Go to SETTINGS>DEVELOPER OPTIONS and turn on USB DEBUGGING.
Step 4: Connect it to your pc and authorize your pc to have usb debugging access.
Step 4: Download the bootloader unlocker apk . Open the folder where you have downloaded the apk. Rename the apk to unlocker.apk. Then type in the address bar of the file explorer "CMD" and press enter. This will open a command terminal. Then type the given code in the terminal an press enter. Then close all file explorer and the command terminal
Code:
adb install unlocker.apk
Step 5: Download TWRP Recovery ZD553KL or ZB553KL (Still not avilable). Open the folder where you have downloaded the img file. Rename it to recovery.img. Then type the given code in the terminal an press enter. Then close all file explorer and the command terminal.
Step 6: Press and hold volume up button+power button until your phone gets switch off. Then it will reboot to fastboot mode.
Step 7: NOTE: Now since ZB553KL dosent have an Official version of twrp. So it is recommended to use temporary booting of recovery. Though I will provide both the codes.
Type this command for temporary booting of twrp recovery.
Code:
fastboot boot recovery.img
This will boot the phone in to twrp recovery mode. After you reboot it will get back to your stock recovery. [It is recommended to back up system, recovery and boot partition of your device using this temporary recovery boot. Coz if you ever want to go back to stock rom you must have stock recovery. ]
Type this command for permanently setting twrp recovery as recovery.
Code:
fastboot flash recovery recovery.img
I forgot to tell you
I have already use ur bootloader unlocker.apk and my fone its already unlock the bootloader. It is ok to install the twrp and how?
And i dont have yet the TWRP Recovery ZB553KL, coz dosent have an official version on my model? What can i do?
---------- Post added at 09:43 AM ---------- Previous post was at 09:37 AM ----------
thank u for helping me (Devc100)
snoopy_042981 said:
And i dont have yet the TWRP Recovery ZB553KL, coz dosent have an official version on my model? What can i do?
---------- Post added at 09:43 AM ---------- Previous post was at 09:37 AM ----------
thank u for helping me (Devc100)
Click to expand...
Click to collapse
You have to wait, till there is a recovery for ZD553KL atleast.
wrong signatures image error
i got wrong signature img error in this
Devc100 said:
Note: This will void the warranty of your device and can also brick your device. Do it at your own risk.
Step 1: Download adb and fastboot in your pc and install it.
Step 2: Turn on developer options in your phone.(Go to SETTINGS>ABOUT>SOFTWARE INFORMATION. Then keep on tapping build number until a toast notification says "YOU ARE NOW DEVELOPER").
Step 3: Turn on USB Debugging. (Go to SETTINGS>DEVELOPER OPTIONS and turn on USB DEBUGGING.
Step 4: Connect it to your pc and authorize your pc to have usb debugging access.
Step 4: Download the bootloader unlocker apk . Open the folder where you have downloaded the apk. Rename the apk to unlocker.apk. Then type in the address bar of the file explorer "CMD" and press enter. This will open a command terminal. Then type the given code in the terminal an press enter. Then close all file explorer and the command terminal
Code:
adb install unlocker.apk
Step 5: Download TWRP Recovery ZD553KL or ZB553KL (Still not avilable). Open the folder where you have downloaded the img file. Rename it to recovery.img. Then type the given code in the terminal an press enter. Then close all file explorer and the command terminal.
Step 6: Press and hold volume up button+power button until your phone gets switch off. Then it will reboot to fastboot mode.
Step 7: NOTE: Now since ZB553KL dosent have an Official version of twrp. So it is recommended to use temporary booting of recovery. Though I will provide both the codes.
Type this command for temporary booting of twrp recovery.
Code:
fastboot boot recovery.img
This will boot the phone in to twrp recovery mode. After you reboot it will get back to your stock recovery. [It is recommended to back up system, recovery and boot partition of your device using this temporary recovery boot. Coz if you ever want to go back to stock rom you must have stock recovery. ]
Type this command for permanently setting twrp recovery as recovery.
Code:
fastboot flash recovery recovery.img
Click to expand...
Click to collapse
snoopy_042981 said:
I have already use ur bootloader unlocker.apk and my fone its already unlock the bootloader. It is ok to install the twrp and how?
Click to expand...
Click to collapse
may i know your firmware version, i try to unlock via app but after reboot still same
Previously I was using Ressurection Remix treble rom which is based on android 9 pie. I went to TWRP and wiped the OS. Then I tried to install a new rom called Dot OS. But it showed error 7. So I flashed Vendortofactory zip within twrp and without rebooting again into TWRP I flashed a new TWRP image within TWRP by selecting Recovery mode. After that I cant boot into TWRP and as already my OS is gone I also cannot boot into any system. Moreover my device is not getting detected in my PC. I cannot install TWRP by writing commands in cmd, while the phone is in fastboot mode as the device is not getting detected in my pc. Really it is urgent. I will be glad if someone helps me. Thanks in advance.
What is the present booted state of your device? Are you in twrp, or bootloader. Most of the time you can keep on pressing the power button. When it boots into a message about unlocked bootloader, press volume button to select recovery and it will boot into twrp
You should be able to boot in fastboot mode without recovery nor os, maybe your drivers are not working on windows? Try different usb ports, check if the display says "bootloader" or something. If nothing works try the usb shunt, this device is literally 'unbrickable' if it's working properly.
Watch this video(https://www.youtube.com/watch?v=DexLELi04XY) and then you will be able to detect your phone in your pc in qcom 9008 mode , then use qfil to flash ZUI firmware ,there are plenty of tutorials on the internet for that ,then follow the proper procedure mentioned in DotOs thread for flashing the new rom .
Hope it helped .
If you don't want to flash the firmware and all long process just follow the following steps
Enter in to the boot loader make sure you installed all the drivers in to pc then open cmd windows in adb fastboot folder and enters the following cmd into the cmd
Fastboot -i 0x2b4c devices this will detect your device
After that enter
Fastboot -i0x2b4c flash recovery recovery name.img
And boom you are good to go flash the rom of your choice and enjoy
For this process you need following files
Adb and fastboot devices
Drivers of zuk z2
Latest recovery and place revovery image file into the adb and fastboot folder if you are confused about anything pm me i am not the expert but i faced simillar problem and solved by this method
yashpatel1221 said:
If you don't want to flash the firmware and all long process just follow the following steps
Enter in to the boot loader make sure you installed all the drivers in to pc then open cmd windows in adb fastboot folder and enters the following cmd into the cmd
Fastboot -i 0x2b4c devices this will detect your device
After that enter
Fastboot -i0x2b4c flash recovery recovery name.img
And boom you are good to go flash the rom of your choice and enjoy
For this process you need following files
Adb and fastboot devices
Drivers of zuk z2
Latest recovery and place revovery image file into the adb and fastboot folder if you are confused about anything pm me i am not the expert but i faced simillar problem and solved by this method
Click to expand...
Click to collapse
This assumes u have upgraded bootloader to 4.4 kernal.
U can still boot into twrp.. When the phone is booting up press vol up key and select recovery.. From there boot into twrp. There select f2v or v2f .. Then flash twrp which u want to flash.. Reboot to recovery.. U will get promp no os installed.. Ignore and reboot to recovery . Then again d9 f2v or v2f depending on what rom to install.. Again reboot to recovery... Then flash rom of ur choice.
This procedure is needed when changing from vendor to factory and vice versa.
sanjay.2704 said:
This assumes u have upgraded bootloader to 4.4 kernal.
U can still boot into twrp.. When the phone is booting up press vol up key and select recovery.. From there boot into twrp. There select f2v or v2f .. Then flash twrp which u want to flash.. Reboot to recovery.. U will get promp no os installed.. Ignore and reboot to recovery . Then again d9 f2v or v2f depending on what rom to install.. Again reboot to recovery... Then flash rom of ur choice.
This procedure is needed when changing from vendor to factory and vice versa.
Click to expand...
Click to collapse
I don't understand what you are talking about as i say i am not some kind of technical expert i am here help regarding this i faced similar situation where i am not able to enter into recovery and also not able to enter into the os and when i restart the phone it automatically boot into fast boot mode what ever option i select and i solved my problem by this method