Develop Bugs

[ROM][UNOFFICIAL][WIP]Cyanogenmod 11 (4.4.4 - PURE KITKAT) WORKING on CANVAS 4

[ROM][UNOFFICIAL][WIP]Cyanogenmod 11 (4.4.4 - PURE KITKAT) WORKING on CANVAS 4
Unofficial Cyanogenmod 11 For Micromax Canvas 4 A210
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* Submitting bug reports on nightly builds is the leading
* cause of male impotence.
*/
This ROM is Built for Wiko Stairway Which is Clone of Micromax A210 by chrmhoffmann. I will help you to enjoy this on our phone.
Check Out the Original Thread and Press Thanks for His Unbelievable work HERE
Instructions.
1.First download CWM RECOVERY FOR THIS ROM
2.using mobile uncle tools app from play store flash it onto your phone
3.after the successful flash of recovery it is time to download CM11 ROM
4.once downloaded , go to your PC and extract the ROM using winrar
5.After the extraction
go into META INF > COM >GOOGLE >updater script
and delete that updater script
6.paste the updater script in the same folder provided below in next section and
7. select all folders(CTRL + A) in the main directory where meta inf and system and all are ..
and then right click and add them to archive using WINRAR
and select zip as for archive type
8.after zipping is done just place the ROM in your sd card
and flash it
as
in recovery mode
select wipe data /factory reset
select mounts and storage
format system
go back and in advanced and select wipe dalvik cache
and then
install zip via sd card
and reboot
and ENJOY!
Downloads
1.Unofficial Cyanogenmod 11 Version 0.17
2.CWM Recovery which Needs to be Used.
4.Updater Script which Needs to Flash
5.Gapps​
THIS THREAD IS NOW BEEN ABANDONED AND IS NO LONGER IN DEVELOPMENT BUT THE WORK MAY BE USED FOR FURTHER DEVELOPMENT
NO LONGER TAKEN CARE OF AS I HAVE A NEW DEVICE NOW
XDA:DevDB Information
[ROM][UNOFFICIAL][WIP]Cyanogenmod 11 (4.4.4 - ) WORKING on CANVAS 4 ABANDONED, ROM for the Micromax Canvas 4 A210
Contributors
yogesh.kalyana, chrmhoffmann
Source Code: http://forum.xda-developers.com/showthread.php?t=2676086
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Based On: CYANOGENMOD
Version Information
Status: Abandoned
Current Beta Version: 0.16
Beta Release Date: 2014-09-18
Created 2014-09-18
Last Updated 2015-09-22

Reserved
Credits.
1. @chrmhoffmann For ROM
2. @NeroD
3. @HACKLEAKS (Rahil Jain)
4. @007jigar

Reserved
Bugs Known.
2nd sim card 3G switch
- Dual SIM is a WIP, not has some bugs (data connection instability, etc.)
- camera for "movies" does not work
- (hw) video en/decoding not enabled
-
- FM radio not available
- A-GPS does not work, GPS works though but slowish
Changelog CM11 0.19:
- sync with CM
- enable CWM to install from cmupdater
Changelog CM11 0.18
- sync with CM
- remove MTK audio policy and use default
- increase BT a2dp MTU (does it help?)
Changelog CM11 0.17
- sync with CM
- first attempt to make BT work: a2dp, car and file transfer seem to work
FAQ
This ROM is Still in Beta Stage so Install it at on your OWN RISK. If you find any Bugs other than above, Dont cry instead Report them so the dev can look at them.
1. To Enable MultiSim
Code:
su
setprop persist.radio.multisim.config dsds
2. To Disable MultiSim
Code:
su
setprop persist.radio.multisim.config none

RESERVED
Here I will Share Some awesome MODS or APPS or THEMES for this ROM in the Feature.
Hit Thanks if I helped.
[MOD][CM11]Real Xperia Z2 Lockscreen for Cyanogenmod 11 by NERO D
http://forum.xda-developers.com/can...-xperia-z2-lockscreen-cyanogenmod-11-t2884690
a lot of thanks to nero d

CM 4 ????
is this 4.4.2 or 4,4,4
and CM4 ........... ????????? really

satsmagic said:
is this 4.4.2 or 4,4,4
and CM4 ........... ????????? really
Click to expand...
Click to collapse
don't you see on top it's highlighted on the top ! 4.4.2

Thank You
Thank You, Yogesh...
I was trying to locate the recovery.img for the previous versions.
Regards and Wishes
Kannan

yogesh.kalyana said:
don't you see on top it's highlighted on the top ! 4.4.2
Click to expand...
Click to collapse
the post title says 4.4.4
also post title says CM11 and OP says CM4

yup sorry !
satsmagic said:
the post title says 4.4.4
also post title says CM11 and OP says CM4
Click to expand...
Click to collapse
my bad mistake , edited now!
thanks mate

yogesh.kalyana said:
my bad mistake , edited now!
thanks mate
Click to expand...
Click to collapse
you are welcome buddy, thanks for all the testing you do for the gr88 developers here

Good this was needed as people didnt know to use stairway build on A210.
Corrections needed 1.Bro its 4.4.4 not 4.4.2.
2.Rename thread to same thread as wiko stairway just change wiko stairway to Micromax A210. And highlight the Instructions.
3.Latest ROM is 0.16. Link- https://goo.im/devs/chrmhoffmann/wiko/cm-11_stairway-ota-UNOFFICIAL-FULLOFBUGS-0.16.zip/
4.Latest Recovery is 0.15 link http://goo.im/devs/chrmhoffmann/wiko//cwm-recovery-wiko-stairway-kk-0.5.img
5.Specify the bugs and make a proper Bug List.
6.Add the Multisim enable/disable commands from original thread.
7. Add Credits Section. Add Mentions of chrmhoffmann and other 3 guys u written.

Status 7
Yogesh,
I get error Status-7
Regards
kannan

satsmagic said:
you are welcome buddy, thanks for all the testing you do for the gr88 developers here
Click to expand...
Click to collapse
Thank you, the goo site does not always work, you can not download the recovery, can someone please put it somewhere else?
thank you

Use firfox!
chuppito said:
Thank you, the goo site does not always work, you can not download the recovery, can someone please put it somewhere else?
thank you
Click to expand...
Click to collapse
it is working for me on all time
just use firefox on PC!

OK!
NeroD said:
Good this was needed as people didnt know to use stairway build on A210.
Corrections needed 1.Bro its 4.4.4 not 4.4.2.
2.Rename thread to same thread as wiko stairway just change wiko stairway to Micromax A210. And highlight the Instructions.
3.Latest ROM is 0.16. Link- https://goo.im/devs/chrmhoffmann/wiko/cm-11_stairway-ota-UNOFFICIAL-FULLOFBUGS-0.16.zip/
4.Latest Recovery is 0.15 link http://goo.im/devs/chrmhoffmann/wiko//cwm-recovery-wiko-stairway-kk-0.5.img
5.Specify the bugs and make a proper Bug List.
6.Add the Multisim enable/disable commands from original thread.
7. Add Credits Section. Add Mentions of chrmhoffmann and other 3 guys u written.
Click to expand...
Click to collapse
1.4.4.4 edited
2.thread name : the original devis okay with that
3. and 4 th links updated
5.bugs : need your help for that to specify all the bugs
6.multisim posted
7.CREDITS GIVEN

yogesh.kalyana said:
it is working for me on all time
just use firefox on PC!
Click to expand...
Click to collapse
I have finally come to the download ... Thanks I test

Can you give screenshots..

Prometheus1408 said:
Can you give screenshots..
Click to expand...
Click to collapse
Screenshots Pls!!
Sent from my D6503

Ashok sha said:
Screenshots Pls!!
Sent from my D6503
Click to expand...
Click to collapse
Why dont you need screenshots for Cyanogenmod 11 they are same as any other cm11 rom. Google for it.

Finally the first kitkat 4.4.4 rom that instal without problems. For now, the only two bug I mentioned are those ...
thank you

[ROM][KITKAT-4.4.2][v3.0.0] Lenovo A3000-H [Stable Version]

This is the Lastest Stable Version of Android Kitkat 4.4.2 for Lenovo A3000-H.....
You Should backup all your files in internal storage and flash this rom by SPFlash tool.....
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Features:
-ANDROID 4.4.2 and kernel version 3.4.67
-Traffic Meter in statusbar
-Some interface improvment
-Google core apps is included
-Camera is full working (Stock camera)
-Pre-Rooted
-Optmize performance
BUGs:
No Bugs...You may till me if you found something.
Download & Install
Download Rom :
Kitkat 4.4.2 v3.0.0
SPFlash Tool : http://www.mediafire.com/download/96as966f65bza69/SP_Flash_Tool_OLD.rar
MTK Driver : http://www.mediafire.com/download/rz11w9iamlvnmoq/Drivers_v1.2.zip
What's New :
v3.0.0
1-New logo and bootanimation
2-traffic meter in statusbar
3-improve interface
4-ART Runtime by default
5-New Gapps Core
6-Chrome browser is default now
7-Some New Apps
XDA:DevDB Information
A3000_KK4.4.2, ROM for the Lenovo A3000
Contributors
Hesham Sleem, Kupyxa4444
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Based On: AOSP
Version Information
Status: Stable
Current Stable Version: 3.0.0
Stable Release Date: 2016-08-19
Created 2016-07-08
Last Updated 2019-01-18

Thank you Pro.
No Error found....?
really this is what I need

Does this version support calling ?

sganguly said:
Does this version support calling ?
Click to expand...
Click to collapse
of course; it is support dual sim and calling

Installed smoothly....but it is only in landscape mode....cannot go to portrait mode...pls help
---------- Post added at 02:17 AM ---------- Previous post was at 02:14 AM ----------
ok...bro...now it is working......super smooth....thanks

Oh a new hero is arise !! thanksssss..
*] front LED holographic keyboard >> another dream in android

I have 16GB version, will it decreased to 4gig like kyupka's previous rom ?
*] front LED holographic keyboard >> another dream in android

Adam Hui said:
I have 16GB version, will it decreased to 4gig like kyupka's previous rom ?
*] front LED holographic keyboard >> another dream in android
Click to expand...
Click to collapse
of course NO
it is make 3GB for data and more than 10GB for internal Storage and you can change it using Partition Tweak

the best KitKat for our tab.....
Thank you @Hesham Sleem... you are great

Hesham Sleem said:
of course NO
it is make 3GB for data and more than 10GB for internal Storage and you can change it using Partition Tweak
Click to expand...
Click to collapse
Can it directly flash from stock 4.2.2 rom using SP Flashtool v.5.1516.00 ?
Or it must be start from rom & old flashtool of your mentioned link at the OP ?
TIA.
*] front LED holographic keyboard >> another dream in android

Adam Hui said:
Can it directly flash from stock 4.2.2 rom using SP Flashtool v.5.1516.00 ?
Or it must be start from rom & old flashtool of your mentioned link at the OP ?
TIA.
*] front LED holographic keyboard >> another dream in android
Click to expand...
Click to collapse
of course you can flash it from any pervious firmware, but be careful all you data in internal storage will be formated...
I recommended you to use spflash tool I attached above

hello dr.hesham
thank you for your effort , but when i load scatter to flash tool and press download nothing happens
would you please tell me where is the problem
thanks

Can anybody share the nvram backup file from the TWRP recovery? I completely lost my baseband, IMEI, GPS, bluetooth, etc so I want to try to restore the nvram from someone else's A3000H. Can you backup the nvram file with TWRP recovery and share the ZIPPED fold to me? Please help me!

my device got dead
i was installing this rom via azam426 method it started flashing and after around 40 sec i got some error . now my device is dead . it wont start flash again
any one pls help.
i was realy looking forward to this rom :crying:

device recovered
starmirza said:
i was installing this rom via azam426 method it started flashing and after around 40 sec i got some error . now my device is dead . it wont start flash again
any one pls help.
i was realy looking forward to this rom :crying:
Click to expand...
Click to collapse
i was able to recover my device using this method
http://forum.xda-developers.com/lenovo-a3000/general/bricked-a3000-f-t2851065
this is much easier method ----> http://firmwares2you.blogspot.com/2015/07/lenovo-a3000-h-firmwarestock-rom-to.html
pls give me a video tutorial for kitkat rom

SP flash tool error dram failed
i was able to recover my tab and fixed nvram also.. then i tried again to flash this rom
this is the same error i got before
now its brick again... trying to fix again
looking for help in this rom

Great
everything is just perfect but I hope it has more modified stuff. :good::fingers-crossed::laugh:

shekrem said:
hello dr.hesham
thank you for your effort , but when i load scatter to flash tool and press download nothing happens
would you please tell me where is the problem
thanks
Click to expand...
Click to collapse
You are welcome .... Use Frimware-Upgrade not download

Ahmad Mukhtar said:
everything is just perfect but I hope it has more modified stuff. :good::fingers-crossed::laugh:
Click to expand...
Click to collapse
You are welcome...tell me if you have any feedback

starmirza said:
i was able to recover my tab and fixed nvram also.. then i tried again to flash this rom
this is the same error i got before
now its brick again... trying to fix again
looking for help in this rom
Click to expand...
Click to collapse
If you still have error in nvram...use the manually method to restore imei and other id

[ROM][UNOFFICIAL][woods]ViperOS-Final-N-v3.1.1 [7.1.2] || [OMS]

Code:
* Your warranty is voided.
*
* We are not responsible for bricked devices, dead SD cards,
* Third World War, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
Get more information about ViperOS on our telegram group - JOIN
Code:
[B]REMINDER[/B]
If you are having problems and want to send a report (Logcat), make sure that you are reporting from the default kernel, not a modified one. Modified kernels can break or fix, even make things better. It depends. I cannot get a full hint of the problem when you're not running the original kernel.
Features:
Status bar Customization
- Customizable icons
- Quick pulldown
- Smart pulldown
- Notification count
- Clock position
- Seconds in clock
- Date design
Quick Settings
- Brightness slider
- Brightness icon
- Tile tap customization
- Header customization
System
- Power menu customization
-INSTALLATTION INSTRUCTIONS-
- Download the latest build of ViperOS ROM
- Take a nandroid backup
- Flash ROM usingrecovery
- Flash Gapps
- Wipe cache
- Wipe dalvik cache
- Reboot
- Enjoy!
-Installation Files-
ROM : https://www.androidfilehost.com/?fid=673791459329057554 > 20171030
ROM : https://www.androidfilehost.com/?fid=889964283620765629 > 20171113
GAPPS : opengapps.org
Base
LineageOS
Credits
crDroid Android
CypherOS
AICP
PureNexus
AOKP
Dirty Unicorns
Paranoid Android
and more..
Sources Tree
https://github.com/dev4wds
SCREENSHOTS

why lineage !
No RR Based

Francesco Franz said:
why lineage !
No RR Based
Click to expand...
Click to collapse
RR is also LineageOS based

iykeDROID™ said:
nevermind , its cool
Click to expand...
Click to collapse
which one to choose AICP, ViperOS, ColtOS or AOSP Extended too many roms and stuck between the decision. currently using RR.

Francesco Franz said:
which one to choose AICP, ViperOS, ColtOS or AOSP Extended too many roms and stuck between the decision. currently using RR.
Click to expand...
Click to collapse
and am currently on ViperOS. bcos i have always yearn for it ever since i left my previous device.

i don't understand why bro i still get fc on phone app ....i tried clean install with all wipes
and no sim card that persists through reboot ...
i tried with + without gapps .....
i will try another rom just to see if the problem is on my device or not

KevMetal said:
i don't understand why bro i still get fc on phone app ....i tried clean install with all wipes
and no sim card that persists through reboot ...
i tried with + without gapps .....
i will try another rom just to see if the problem is on my device or not
Click to expand...
Click to collapse
okay, lemme know how it goes afterwards

iykeDROID™ said:
okay, lemme know how it goes afterwards
Click to expand...
Click to collapse
XenonHD is working fine
But not Viper ..same problem...look in screenshots

KevMetal said:
XenonHD is working fine
But not Viper ..same problem...look in screenshots
Click to expand...
Click to collapse
i will look into the VoLTE

Ambient display is not working... But activated on options... I don't understand! Any solution or enabler?

iykeDROID™ said:
i will look into the VoLTE
Click to expand...
Click to collapse
I found the reason .... After flashing magisk 14.3 before first boot all my sim not found and phone app crashes disappeared

Francesco Franz said:
@iykeDROID™ need more screenies of ViperOS
Click to expand...
Click to collapse
here are they.
NB: am using gaia substratum theme
SCREENSHOOTS

ROM Update !
> 20171113 : https://www.androidfilehost.com/?fid=889964283620765629

Are we the only two sane guys who like ViperOs and own a moto xt1762 :good:

Will it work for MT6735? I checked CPU-Z and it shows unknown board but hardware it shows mt6735. I have XT1760

yashburshe007 said:
Will it work for MT6735? I checked CPU-Z and it shows unknown board but hardware it shows mt6735. I have XT1760
Click to expand...
Click to collapse
yes

So do I only need to Update to the latest Magisk?
---------- Post added at 08:27 PM ---------- Previous post was at 08:18 PM ----------
Hey, I'm a really big Noob as far as that goes, Can you Guys please Help me? I already installed twrp on my ZTE Blade V6 and tried to Install ViperOS which actually worked, but the Sim-Cards are not being detected... I don't know what I could do, please help me!

NotActuallyMe said:
So do I only need to Update to the latest Magisk?
---------- Post added at 08:27 PM ---------- Previous post was at 08:18 PM ----------
Hey, I'm a really big Noob as far as that goes, Can you Guys please Help me? I already installed twrp on my ZTE Blade V6 and tried to Install ViperOS which actually worked, but the Sim-Cards are not being detected... I don't know what I could do, please help me!
Click to expand...
Click to collapse
You should look for a ROM for your device. This one is for Moto E4 with MediaTek processor.

The rom works with the Model XT1764?

bYAndriiDROID said:
The rom works with the Model XT1764?
Click to expand...
Click to collapse
After some searching on the internet:
ARQUITECTURA DEL SISTEMA/PROCESADOR
MARCA: MEDIATEK
MODELO: MT6737
NUMERO DE NUCLEOS: QUAD CORE
VELOCIDAD: 1.3 GHZ
So it might work

[UNOFFICIAL][PORT][MOCHA][Beta][5.1.1]RemixOS 2.0.305_recovery_flashable.zip

Hi friend!
The Ultimate ROM any Android device should have is here for mipad1.
As all know Remix OS is one of the best rom available for Android device
but it's limited to few devices.
Remix OS give you full pc experience on your Android devices.
i was using Remix OS 1.0 which was awesome.
so i have decided to get Remix OS 2.0 on mipad 1.
Luckily i found a zip file of remixos on xda shared by @majinvegeta3886
here !
https://forum.xda-developers.com/remix/remix-ultratablet/remix-2-0-305-flashable-zip-t3426112
which is base on Android 5.1.1 .
so i need a rom that is running on mipad1 with Android Version 5.1.1
which is already builded by most respected developer for mipad1 @highwaystar_ru .
so i used these 2 roms and a day of my life and made Remix OS 2.0 bootable
on mipad1.
ROM is very smooth even with bugs
#############
Download Link ..
#############
Remix OS => https://drive.google.com/file/d/1-SqdWZXyx_YVnvcANyJ4JSGn4OgLR5zy/view?usp=drivesdk
Repartition => http://en.miui.com/thread-118294-1-1.html
Twrp Multirom = > https://rahulthevirus.github.io/multirom_mocha/multirom/twrp-multirom-20170311-UNOFFICIAL-mocha.img
###########
How to flash
###########
* You must have Stock blobs.
if you are using smoke rom base on shield blob so first return to stock blob base rom.
* You must have repartition if not then get my zip And flash threw twrp 3x
* You must have multirom twrp recovery .
* Be ready with these things..
return to stock blob (if not already ) , flash twrp , wipe everything ( /delvik- cache /cache /system /data )
wiping internal is not nessesrery just delete folder name "Android" from internal memory.
* After this reboot into twrp and flash rom in intarnal ( × Not in multirom)
* When completed flash superuser zip
* Remember Do not flash gapps (core gapps already builtin) otherwise you may get errors.
* you can install Gapps simply like an apk or from playstore.
* Now reboot and wait for welcome screen. (Sometimes this can take ~15 min.)
* Follow Setup screen and enjoy ..
#######
Working
#######
* Touch panel
* Hardware keys
* Navigation Keys
* Sound
* Wifi
* Internal Sdcard
* & All basic stuffs to run a device
###########
Known Bugs
##########
* All bugs available in CM 12.1
* Camera not working
* Bluetooth not working
* Mic not working
* Headphone s not working
* Ex Sdcard not working
* default cm init (managed threw multirom init )
Updated changelogs!
drakonizer said:
RemixOS update:
I have taken the build by Rahul and fixed the following bugs:
* Camera
* Headphone Jack detection
* SD Card
The current bugs are now only:
* Bluetooth
* Microphone
Click to expand...
Click to collapse
##########
Source :-
#########
Remix OS for Remix Ultratablet :- https://forum.xda-developers.com/remix/remix-ultratablet/remix-2-0-305-flashable-zip-t3426112
CM 12 .1 for mocha :- https://forum.xda-developers.com/mi-pad/development/cyanogenmod-12-1-mipad-mocha-t3535640
kernel source :- https://github.com/RahulTheVirus/nethunter-mocha.git
########
Credit :-
#######
All major credit goes to Jide to transforming Android
and to @highwaystar_ru for cm 12.1
& @majinvegeta3886 For sharing Remix OS zip.
And Special thanks to @drakonizer for bugfix.
##############################
Want contribute or need any assistance
##############################
Mi Pad 1 Group on Telegram
https://t.me/MiPad1
________________________________________________
If anyone help to bugs fix that highly appreciated.
Thanks !
=============================
Download Latest here!
==============================
RemixOS build 3 => [email protected]
Currently some issue with rom updated by darkonizer
i have temporary solution..
flash my beta 3 build. setup everything and once you are in remixOS just copy 2 files from darkonizer's build
framework-res.apk
framework.jar
and replace your system files from /system/framework
reboot.
reboot into recovery and flash this fix zip
RemixOS-2.0.305-framework-fix.zip
this will fix your issue but camera still broken.
Almost stable build
RemixOS-2.0.305-mocha.zip
=================================

Some Screenshots

Pradyumna26 said:
Some Screenshots
Click to expand...
Click to collapse
Thanks

Thanks for your post.. Im getting the attached error.. Any suggestion?

Ardhendu said:
Thanks for your post.. Im getting the attached error.. Any suggestion?
Click to expand...
Click to collapse
If i am not wrong then you have formated data and without reboot you flashed rom.
So advice to reboot into recovery then flash rom.
Also make sure you have already merged both system partitions into single .
I mean repartition to 1.2GB.

RahulTheVirus said:
If i am not wrong then you have formated data and without reboot you flashed rom.
So advice to reboot into recovery then flash rom.
Also make sure you have already merged both system partitions into single .
I mean repartition to 1.2GB.
Click to expand...
Click to collapse
Rebooting again into recovery before flashing the rom worked. It transformed mipad into a laptop like device. Negligible lag.
Can you please make me clear if it works with multi rom? Because i want keep los14 along with it...

Ardhendu said:
Rebooting again into recovery before flashing the rom worked. It transformed mipad into a laptop like device. Negligible lag.
Can you please make me clear if it works with multi rom? Because i want keep los14 along with it...
Click to expand...
Click to collapse
Yes it will work:good:
But recommanding to use los14 as secondry if using twrp given in thread.
Because multirom have 2 versions and same has twrp.
So choose acordingly ..
Any issue feel free to connect me :good:

RemixOS update:
I have taken the build by Rahul and fixed the following bugs:
* Camera
* Headphone Jack detection
* SD Card
The current bugs are now only:
* Bluetooth
* Microphone
DOWNLOAD:
https://www.androidfilehost.com/?fid=673791459329072079

drakonizer said:
RemixOS update:
I have taken the build by Rahul and fixed the following bugs:
* Camera
* Headphone Jack detection
* SD Card
The current bugs are now only:
* Bluetooth
* Microphone
DOWNLOAD:
https://www.androidfilehost.com/?fid=673791459329072079
Click to expand...
Click to collapse
Flashed the rom provided by you, but it is not booting getting stuck at this screen at the time of first boot.

ASK-Rambo said:
Flashed the rom provided by you, but it is not booting getting stuck at this screen at the time of first boot.
Click to expand...
Click to collapse
Same here... ?

ASK-Rambo said:
Flashed the rom provided by you, but it is not booting getting stuck at this screen at the time of first boot.
Click to expand...
Click to collapse
Ardhendu said:
Same here...
Click to expand...
Click to collapse
Sorry friends i have flashed rom and found same issue .
we 'll fix rom as soon as possible.
we both are very busy right now.
i have updated my thread with solution please check .

RahulTheVirus said:
Hi friend!
Currently some issue with rom updated by darkonizer
i have temporary solution..
flash my beta 3 build. setup everything and once you are in remixOS just copy 2 files from darkonizer's build
framework-res.apk
framework.jar
and replace your system files from /system/framework
reboot.
this will fix your issue but camera still broken.
=================================
Click to expand...
Click to collapse
Resulted bootloop.... :crying:

Ardhendu said:
Resulted bootloop.... :crying:
Click to expand...
Click to collapse
Not possible , i am using this right now .

RahulTheVirus said:
Not possible , i am using this right now .
Click to expand...
Click to collapse
Same here...i also got bootloop after replacing those two files. If possible can you provide flashable zip for those files or a working build that you are using on your mipad after replacing files.

ASK-Rambo said:
Same here...i also got bootloop after replacing those two files. If possible can you provide flashable zip for those files or a working build that you are using on your mipad after replacing files.
Click to expand...
Click to collapse
I will upload a fixed build this weekend. I *think* you should be fine if you flash the first build, set it up, and then dirty flash my build. You can test and see.

drakonizer said:
I will upload a fixed build this weekend. I *think* you should be fine if you flash the first build, set it up, and then dirty flash my build. You can test and see.
Click to expand...
Click to collapse
Headphone jack not working is the major bug for me as i use my mipad mostly for the media. Hence the first build is not usable for me as of now. So
Waiting for the new build.
Ps:- take your time bro. You guys are doing great work for our beloved device. Peace.

ASK-Rambo said:
Same here...i also got bootloop after replacing those two files. If possible can you provide flashable zip for those files or a working build that you are using on your mipad after replacing files.
Click to expand...
Click to collapse
ok i'll share flashable zip soon .

ASK-Rambo said:
Same here...i also got bootloop after replacing those two files. If possible can you provide flashable zip for those files or a working build that you are using on your mipad after replacing files.
Click to expand...
Click to collapse
Ardhendu said:
Resulted bootloop.... :crying:
Click to expand...
Click to collapse
Hi
Ardhendu & ASK-Rambo .
Thanks for feedback.
post is updated with recovery flashable zip.
I think now all your issue will solve for now .

RahulTheVirus said:
Hi
Ardhendu & ASK-Rambo .
Thanks for feedback.
post is updated with recovery flashable zip.
I think now all your issue will solve for now .
Click to expand...
Click to collapse
A big thanks again for the the ROM again......
I'm seeing this post late :silly:
I just replaced the firmware files in your old ZIP and flashed it and worked for me....:victory:
Now it is looking like a complete ROM... I don't use camera in MIPAD anyway....

Recently facing a bug while device in auto rotate and screen is rotated, the systemUI is restarting...... I was not facing this for 2 weeks.. It appeared recently... Any one faced this issue?

ReaperTreble V3.0 [J730X/J530X][TREBLE][GSI]

ReaperTreble V3.0​
Code:
#include <std_disclaimer.h>
/*
* Your warranty is... still valid?
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Changelog
- Initial Release for J7/530X
- Removed useless security stuff
- fixed minor bugs
- Debloated
- Changed Configs
- Changed WiFi blobs to stock J7
- Used stock J7 Prime files
- Kraken Kernel RC14 included (no reboots)
Yes, TRR Treble is supported.
Click to expand...
Click to collapse
How to install
- Flash Create Vendor zip from @ananjaser1211's Spaget project and reboot to recovery.
- Download any ARM32_Binder64 A-only Android 9/10 GSI(Or simply A64 A-only GSI)
- Download latest ReaperTreble Zip
- Reboot to recovery and wipe System, Vendor, Cache/Dalvic and Data(Wiping internal storage isn't necessary)
- Flash GSI and ReaperTreble zip(or the otherway around)
- Reboot to system and enjoy
Click to expand...
Click to collapse
Download link-
- Androidfilehost
- Mirror GDrive
Click to expand...
Click to collapse
Bugs
- Offline Charging in Q GSIs
- NFC
- Stretched camera in some apps(GSI camera works perfect)
- You tell us
Click to expand...
Click to collapse
Donations:- Donating to charity would be better. But if you wanna thank me, I'd love if you hit that thanks button.
Click to expand...
Click to collapse
Telegram support group.
Credits
- @therealmodder
- @ananjaser1211
- @corsicanu
- @SPARTANICUS
- @DAvinash97
- And all my telegram testers.
PM me at @soulr344 if i missed anyone.
Click to expand...
Click to collapse
XDA:DevDB Information
ReaperTreble V3.0 [J730X/J530X], ROM for the Samsung Galaxy J7 (2017)
Contributors
soulr344, therealmodder, ananjaser1211
Source Code: https://github.com/SPART4NICUS/android_kernel_samsung_exynos7870
ROM OS Version: Android 10
ROM Kernel: Linux 3.x
Version Information
Status: Stable
Current Stable Version: 3.0
Stable Release Date: 2020-04-28
Created 2020-04-28
Last Updated 2020-04-28

Nice work as always!
btw, don't upload to AFH. They are using dumb**** servers and we arent be able to download

bien2004official said:
Nice work as always!
btw, don't upload to AFH. They are using dumb**** servers and we arent be able to download
Click to expand...
Click to collapse
Yeah I've added gdrive mirror, thanks bro

error 6 in twrp how to fix it?

vytska69 said:
error 6 in twrp how to fix it?
Click to expand...
Click to collapse
I have the same problem

I'm sorry for the inconvenience but the issue is fixed now, go ahead and redownload it. Thanks

I have followed the steps and the camera does not open that gsi must be downloaded or how to fix it

error in camera does not open gsi lineage

agaponi said:
error in camera does not open gsi lineage
Click to expand...
Click to collapse
Camera perfectly works according to my testers. Mention your device/kernel (and send logs if possible) to fix the issue.

It is the J5 J530f and I installed the lineage the variant of a-gsi and there will be no camera and I followed the steps or guide me what gsi I have to download or something because if I am doing something wrong

agaponi said:
It is the J5 J530f and I installed the lineage the variant of a-gsi and there will be no camera and I followed the steps or guide me what gsi I have to download or something because if I am doing something wrong
Click to expand...
Click to collapse
Does any third party camera work? And as i said, unless you give logs, we cant help

Back and recents keys not working, only įn virtual navbar

vytska69 said:
Back and recents keys not working, only įn virtual navbar
Click to expand...
Click to collapse
what u GSI used?

i do test this my step
1. from stock with twrp (do full wipe)
2. reboot to recovery
3. install creat vendor and reboot to recovery
4. full wipe and reboot to recovery
5. instal reaper trebel and reboot recovery
6. instal GSI (los q a64a) and opengaps nano
7. reboot and get only j730gm logo restart again and again
any wrong my step ??

agaponi said:
It is the J5 J530f and I installed the lineage the variant of a-gsi and there will be no camera and I followed the steps or guide me what gsi I have to download or something because if I am doing something wrong
Click to expand...
Click to collapse
Seems like camera is bugged in gsi but is working just fine on oneui. Thanks for the report, I'm working towards solving the issue.

SAMSIANTO said:
i do test this my step
1. from stock with twrp (do full wipe)
2. reboot to recovery
3. install creat vendor and reboot to recovery
4. full wipe and reboot to recovery
5. instal reaper trebel and reboot recovery
6. instal GSI (los q a64a) and opengaps nano
7. reboot and get only j730gm logo restart again and again
any wrong my step ??
Click to expand...
Click to collapse
one again, work,, can boot and great work,, :good:

j730f Turkey sim no service.