Related
By far the best forum is 4pda. A big thanks to forum member acbka aka asyan4ik
1. Eloquent
2. Phandroid
3. HTC Mania
4. Droid Sans
5. Android Hilfe
6. Frandroid
7. 4pda.ru MATE
Shendu and also for the P6
MIUI
LEWA OS
News
Unlock Codes
uppon2 said:
By far the best forum is Eloquent. Keep an eye on these 2 users 'fte9k' and 'kangvip' - I did try one of the roms out but it was all Chinese. I kept getting a constant system force close at the startup procedure sent in to bootloop. Be very careful when trying the non english roms! I do not want to hear anybody blaming me for a bricked phone.
1. Eloquent
2. Phandroid
3. HTC Mania
4. Droid Sans
5. Android Hilfe
6. Frandroid
7. MIUI
8. Unlock Codes
9. News
Click to expand...
Click to collapse
You can add a Russian forum 4pda.ru MATE
acbka said:
You can add a Russian forum 4pda.ru MATE
Click to expand...
Click to collapse
Added
I am about to try LEWA OS. I have always wanted to give this a shot but it was never available on any of my devices. I will report back
*EDIT* Look below for details
uppon2 said:
I am about to try LEWA OS. I have always wanted to give this a shot but it was never available on any of my devices. I will report back
*EDIT* I have changed my mind. I have taken a long time to setup my phone to be the way it is now and don't want to risk having to flash stock firmware again in order to fix a soft bricked phone, not that it usually worries me, it's just annoying trying to get everything perfect again (I don't rely on nandroid backups as even they aren't perfect_
Click to expand...
Click to collapse
you are wrong, backup through twrp 2.6.3.3 works perfectly! Before Recover to do
wipe - advanced wipe
-Wipe dalvik cache
-System
-Cache
-Custom Storage
-Date
restore you buckup -
reboot -
i restore stock b907 / pac man rom / my port fly ui (cm 10.1 joe.stone)
:good:
acbka said:
you are wrong, backup through twrp 2.6.3.3 works perfectly! Before Recover to do
wipe - advanced wipe
-Wipe dalvik cache
-System
-Cache
-Custom Storage
-Date
restore you buckup -
reboot -
i restore stock b907 / pac man rom / my port fly ui (cm 10.1 joe.stone)
:good:
Click to expand...
Click to collapse
I have been doing this for many years. I have goten to points of soft bricking where recovery is impossible to get in to and where I needed to enter download/bootloader modes. The only way to restore a nandroid is if I have backed it up to my computer beforehand, flashed a firmware in download/bootloader mode then re-root/unlock and flash a recovery again, transfer the nandroid to my device and hope the data has not been corrupted during the process between phone and computer. I have actually needed to do this several times and more than once the nandroid was not restorable.
MIUI V5
http://rom.miui.com/en/download/view/id/359370#top
I ended up flashing LEWA OS. Very fast and everything seems to be working fine for me. GPS is working better for me now than on stock, camera and HDR mode are great, speed is good. Wifi and Data is working flawlessly. Beautiful lockscreen and UI. All of the theming options seem to be working as well (for those familiar with MIUI etc.) The rom has a lot of visual tweaking and you can even kill the current running app by long pressing the back button *note* it does work, you just need to hold it for longer. You can also swipe in between the notifications and the switches tabs anywhere on the screen
The first time I flashed this it would not pass the boot animation. I ended up flashing B907 again and then running the bootloader unlock again (regardless of if I needed to or not) and then flashed the rom again. Step 1. Copy the LEWA rom zip and Gapps to your phone, then reboot in to recovery. 2. In TWRP; do an advanced wipe "cache, dalv, system, data" and then go to install and find the rom and install it. 3. reboot and make sure the rom loads all the way (do not bother setting up google account yet), once this happens reboot in to recovery again by holding power button and selecting reboot>recovery (inside of the rom this option is available), once you are there please install Gapps with TWRP, then reboot and enjoy.
Screenshots
Lockscreen Screenshots
Video showing off the rom (all of these features work on HAM)
uppon2 said:
I ended up flashing LEWA OS. Very fast and everything seems to be working fine for me, the only issue so far is I can not scroll left or right to select lockscreen shortcuts, I can only slide it down to unlock. Camera and HDR mode are great, speed is good. Wifi and Data is working flawlessly. Beautiful lockscreen and UI. All of the theming options seem to be working as well (for those familiar with MIUI etc.)
The first time I flashed this it would not pass the boot animation. I ended up flashing B907 again and then running the bootloader unlock again (regardless of if I needed to or not) and then flashed LEWA rom by extracted the files to a new folder and then running the Flash_All.bat from inside the folder. After the files have finished all I did was reboot and it worked this time.
Click to expand...
Click to collapse
Hi, You can put some screenshots of the ROM??
thanks.
elroysk said:
http://rom.miui.com/en/download/view/id/359370#top
Click to expand...
Click to collapse
Because of P6?
This ROM is 100% compatible with Mate?
I have not tried.
ErSergi said:
Hi, You can put some screenshots of the ROM??
thanks.
Click to expand...
Click to collapse
Here are some screen shots. (The navigation keys are like that by choice, remember I am using the Australian model so I only have 1gb of ram )
Some of the lockscreen which is actually live (I am using the BigBang theme)
elroysk said:
http://rom.miui.com/en/download/view/id/359370#top
Click to expand...
Click to collapse
hasbrone said:
Because of P6?
This ROM is 100% compatible with Mate?
Click to expand...
Click to collapse
If you look in the first post of my thread, you will see that MIUI is already listed but from a different download area and from a different author. If you scroll down you will actually find the file for Ascend Mate. I will tell you now though, the file name is the same as the P6 so I am assuming it is the same or they have used the P6 file and tweaked it. I am going to look at both files and give it a shot at running them today.
This is the file provided under the Huawei Ascend Mate
uppon2 said:
If you look in the first post of my thread, you will see that MIUI is already listed but from a different download area and from a different author. If you scroll down you will actually find the file for Ascend Mate. I will tell you now though, the file name is the same as the P6 so I am assuming it is the same or they have used the P6 file and tweaked it. I am going to look at both files and give it a shot at running them today.
This is the file provided under the Huawei Ascend Mate
Click to expand...
Click to collapse
I already installed this rom and it looks neat..
before you install make sure u replace the boot.img with ascend mates boot.img file. the one in the zip file is for P6.
Hi uppon2 , Hd video playback youtube in this ROM? works?
You can put the link in the forum, where you downloaded this ROM Lewa Os.
thanks!
I downloaded d zip...how to flash it
Sent from my HUAWEI MT1-U06
ErSergi said:
Hi uppon2 , Hd video playback youtube in this ROM? works?
You can put the link in the forum, where you downloaded this ROM Lewa Os.
thanks!
Click to expand...
Click to collapse
HD Playback is working fine for me with Youtube. You can get the file from the first post or follow my instructions below
shaun100689 said:
I downloaded d zip...how to flash it
Sent from my HUAWEI MT1-U06
Click to expand...
Click to collapse
I have already given instructions on how to flash the file and I will post them again.
The first time I flashed this it would not pass the boot animation. I ended up flashing B907 again and then running the bootloader unlock again (regardless of if I needed to or not) and then flashed LEWA rom by extracting the files to a new folder and then running the Flash_All.bat from inside the folder. After the files have finished all I did was reboot and it worked this time. I then installed Gapps after being certain that the rom would load
So is it necessity to unlock boot loader...?
Sent from my HUAWEI MT1-U06
Uppon2 , https://disk.yandex.com/public/?hash=UG0GbIYB6yTozqYOQtxz5U5g0Bf7ymAIfTr3ZqQyjg8=
I downloaded this ROM and no. bat file in order to install ...
as installed?
this link is correct, because I see this. bat file to install??
I think these instructions are not in this rom?????
The first time I flashed this it would not pass the boot animation. I ended up flashing B907 again and then running the bootloader unlock again (regardless of if I needed to or not) and then flashed LEWA rom by extracting the files to a new folder and then running the Flash_All.bat from inside the folder. After the files have finished all I did was reboot and it worked this time. I then installed Gapps after being certain that the rom would load
Did you know that there is LeWa ROM for P6?
Ported by ry09iu. All credits go to him.
As a huge fan of MIUI I must say that LeWa is very good, in some respects better than MIUI. It is smoother and faster than MIUI. Battery life is better. Great alternative.
Many customization options and features, security, privacy, anti theft, power saving, themes....
JB 4.2.2 based
Features:
- Themes
- Light and fast
- Customizable Power management
- Permissions manager
- Anti-theft
- Data monitor
- Rooted
Multi language
Installation:
Can be installed from either version of TWRP
1. Boot to recovery
2. Wipe dalvik, cache, system, data, custom storage
3. Install ROM
4. Reboot
Link from the author (very slow)
http://pan.baidu.com/s/1qWpWSWk
I uploaded it to my Dropbox:
https://www.dropbox.com/s/aizgiumqb1hseyg/lewa_hwp6-u06_14.03.05.12_4.2.zip
LeWa website
http://www.lewaos.com/en/
Here are some screenshots
How to flash?
Currently on Kitkat.. how do I flash?
Lamech242 said:
Currently on Kitkat.. how do I flash?
Click to expand...
Click to collapse
Makes no difference what ROM you are currently on, as long as you have TWRP installed. Just follow Installation instructions in OP.
Please give precise install instructions. After clean flash on JB TWRP (wipe everything except internal and external, then flash), I'm stuck on the Huawei Ascend logo.
lootjelo said:
Please give precise install instructions. After clean flash on JB TWRP (wipe everything except internal and external, then flash), I'm stuck on the Huawei Ascend logo.
Click to expand...
Click to collapse
Like I said in first post I flashed with KK TWRP, I don't think it makes difference. If you are downgrading from KK ROM see my post above, you need to flash that small update.app first.
As you know MIUI is based on P6-U06V100R001C17B120. I flashed LeWa from MIUI.
I did the same steps as you, but immediately after flash I wiped dalvik and cache again.
I have a question. Does it have a home screen lock function? like Go Launcher Ex, where you can lock your home screen, to prevent any unwanted changes to the installation, or in some ROM case, accidental uninstallations of apps.
iwtfmcl said:
Like I said in first post I flashed with KK TWRP, I don't think it makes difference. If you are downgrading from KK ROM see my post above, you need to flash that small update.app first.
As you know MIUI is based on P6-U06V100R001C17B120. I flashed LeWa from MIUI.
I did the same steps as you, but immediately after flash I wiped dalvik and cache again.
Click to expand...
Click to collapse
Thanks! Will go back to MIUI first.
so twrp 2.7.x.x isn't only for kk...it works just fine on jb roms... ??
zemega said:
I have a question. Does it have a home screen lock function? like Go Launcher Ex, where you can lock your home screen, to prevent any unwanted changes to the installation, or in some ROM case, accidental uninstallations of apps.
Click to expand...
Click to collapse
Of course it does.
You can choose PIN, pattern lock, password
meilbox said:
so twrp 2.7.x.x isn't only for kk...it works just fine on jb roms... ??
Click to expand...
Click to collapse
I did it and it works, I don't know what to say and what problems are using it with JB.
iwtfmcl said:
I did it and it works, I don't know what to say and what problems are using it with JB. I don't want to sound like a broken record but maybe flashing that intermediate update.app enables flashing JB with any recovery, ie downgrading from KK to JB.
Click to expand...
Click to collapse
Hi!
You should post this rom in the section dedicated for custom rom : Ascend P6 Android Development, with credit for developer creator !
Anyway good luck !
surdu_petru said:
Hi!
You should post this rom in the section dedicated for custom rom : Ascend P6 Android Development, with credit for developer creator !
Anyway good luck !
Click to expand...
Click to collapse
Hi Surdu,
I did post it there but moderator moved it. Someone else complained about same thing, his post moved from there to here.
So I don't know what's going on with moderation here.
I have edited original post giving credit to Ry09iu. I ask moderator to please move the thread where it belongs.
Thank you
iwtfmcl said:
I have edited original post giving credit to Ry09iu. I ask moderator to please move the thread where it belongs.
Thank you
Click to expand...
Click to collapse
Yep, but also you must edit your OP ( first post ) to look like other custom rom thread !
You must have a dedicated section for : Changelog, Downloads, Installations, Credit and so on .... You can inspire from other posts already made !
As you posted you now, can not be placed in the section of Android P6 Development, because it does not meet these conditions .
Thanks for sharing! Installed, and it works!
For those who don't know how to install, you can add this to OP:
INSTRUCTIONS
-Make sure you are on a stock JB ROM
-Install CWM using Xuefy's recovery installer (translation)
-Download MIUI
-Make sure it's on your EXTERNAL SD CARD
-Reboot into CWM
-Factory reset
-Flash MIUI from your external SD card
-Factory reset (or else you will get stuck on MIUI logo)
-Reboot system
-Flash TWRP for JB
-Download LeWa OS 5.1 & JB GApps
-Reboot into TWRP
-Go to wipe -> advanced
-Wipe everything except for internal and external
-Go to install
-Select LeWa OS
-Add zip to que
-Select JB GApps
-Install
-Wipe cache and dalvik
-Reboot
Settings will crash when trying to add a google account on boot, so skip it, and add it in settings!
Enjoy ^^
---------- Post added at 10:31 PM ---------- Previous post was at 09:56 PM ----------
Okay, so I found a big issue (at least for me)
The Play Store won't update or install anything! Every app always gets stuck on the same percentage (Play Music always gets stuck at 100%, Google Search at 58% etc.). Clearing app cache, app data, removing and re-adding google account, even reinstalling GApps or trying another package all didn't work for me, and resulted in the exact same outcome. So for now I'm going to need to go back to another ROM
lootjelo said:
Thanks for sharing! Installed, and it works!
For those who don't know how to install, you can add this to OP:
INSTRUCTIONS
-Make sure you are on a stock JB ROM
-Download MIUI
-Make sure it's on your EXTERNAL SD CARD
-Reboot into CWM
-Factory reset
-Flash MIUI from your external SD card
Settings will crash when trying to add a google account on boot, so skip it, and add it in settings!
Enjoy ^^
---------- Post added at 10:31 PM ---------- Previous post was at 09:56 PM ----------
Okay, so I found a big issue (at least for me)
The Play Store won't update or install anything! Every app always gets stuck on the same percentage (Play Music always gets stuck at 100%, Google Search at 58% etc.). Clearing app cache, app data, removing and re-adding google account, even reinstalling GApps or trying another package all didn't work for me, and resulted in the exact same outcome. So for now I'm going to need to go back to another ROM
Click to expand...
Click to collapse
First, glad you got it installed
There is no need to flash MIUI.
I don't use Google account so Play store issues don't bother me. But apparently there are some simple solutions for Play store, search here at XDA if you like this ROM.
iwtfmcl said:
Of course it does.
You can choose PIN, pattern lock, password
Click to expand...
Click to collapse
I'm not sure you get my question. Let me rephrase that. Perhaps I should use the word 'desktop' as some ROM called it, where all the apps and widgets are mostly. Where you tap and hold to move the app shortcut or edit widget around. The Go Launcher EX has a function to lock this 'desktop' so that no editing can be done.
lootjelo said:
Thanks for sharing! Installed, and it works!
[/COLOR]Okay, so I found a big issue (at least for me)
The Play Store won't update or install anything! Every app always gets stuck on the same percentage (Play Music always gets stuck at 100%, Google Search at 58% etc.). Clearing app cache, app data, removing and re-adding google account, even reinstalling GApps or trying another package all didn't work for me, and resulted in the exact same outcome. So for now I'm going to need to go back to another ROM
Click to expand...
Click to collapse
I knew there was simple solution to Play store getting stuck at 100% download. It may not be acceptable solution but it works. All you have to do is exit Play store, while it shows 100% downloaded, reboot and the app you were downloading will install when phone is rebooted. Weird.
iwtfmcl said:
First, glad you got it installed
There is no need to flash MIUI, having stock P6-U06V100R001C17B120 will do.
I don't use Google account so Play store issues don't bother me. But apparently there are some simple solutions for Play store, search here at XDA if you like this ROM.
Click to expand...
Click to collapse
Yes, but installing B118 or B120 stock may brick your phone, while MIUI can be flashed from B125, which is 100% safe
Google Play issue is really annoying for me. If you don't use Play, what app store do you use?
Sent from my P6-U06 using Tapatalk
lootjelo said:
Yes, but installing B118 or B120 stock may brick your phone, while MIUI can be flashed from B125, which is 100% safe
Google Play issue is really annoying for me. If you don't use Play, what app store do you use?
Sent from my P6-U06 using Tapatalk
Click to expand...
Click to collapse
I don't use Google for few reasons, one of them is that Google services are consuming too much battery.
Here is a tip to save lot of battery if you are using Gapps:
Use Disable service app to disable some Google services, main culprit is Gtalk service which you absolutely don't need if you don't use Hangouts.
And for apps Mobogenie has everything I need.
translation with Google
[Basic information]
ROM Name: [HRT-Super_Lin] Huawei Mate8 full range EMUI5. 0_B580 Power smooth ROOT Lite
ROM Size: 932M
Adaptation version: Mate8 full range
Test models: Mate8 full series
Author : HRT-Super_Lin
[ROM details]
ROM based on official EMUI5. 0_B580 extract production, global odex merge
Add desktop 5X5 options, desktop long press slide, more settings, desktop layout, select
maintain the official complete style, optimize memory usage SuperSU rights management, For ROOT (Superuser)
To open the system update software, in the system / app / HwOUC. Bak Suffix for the apk
Zipalign optimization, reduce memory partition occupancy, add busybox, to facilitate the use of advanced users
delete address book Huawei customer service, to retain Huawei boot sound official Its weather components and system functional components
club.huawei.com
MT8-EMUI5.0-AL10_B580.zip
Mega Link comes later...
1. first must unlock the phone, and successfully brush into the Chinese TWRP Recovery, to ensure that the computer installed a good phone driver, download the recovery after decompression, the phone open USB debugging connected to the computer, double-click run. Bat start brushing, TWRP Recovery address Of TWRP):
MT8-EMUI5.0_TWRP.rar -> https://pan.baidu.com/s/1qXWrilm
2. Download ZIP format brush package, copied to the memory card, can be an external card can also be a built-in card, you can copy to the root directory, you can also copy to the subdirectory
3. Use the Recovery tool or in the shutdown state long press Volume 'button to enter the recovery interface. 4. After entering Recovery, click Clear Data to clear the data and return to the main interface. 5. Return to the main interface and select Install Brush Pack. The internal storage called: emmc, external storage called sdcard, click on the top of the UP A Level return to a directory) 'click Brush Pack' sliding brush into
6. Card brush is not necessary after the success of double-clear, otherwise it may lead to ROOT failure
ROM built several practical promotional software, if not, please use the re-file manager for unloading
statement: recently found someone steal my ROM to join the promotion without the test release, if found, please machine friends Report, please respect the author of labor results, forbidden based on the ROM for the second package, offenders must study
[ROM] Download
Huawei MATE8 entire network （NXT-AL10）：pan.baidu.com/s/1qXWrilm
Huawei MATE8 Telecom Edition （NXT-CL00）：pan.baidu.com/s/1c1FKBDI
Huawei MATE8 China Unicom （NXT-DL00）：pan.baidu.com/s/1pLRjMBp
Huawei MATE8 mobile version （NXT-TL00）：pan.baidu.com/s/1dFqWs85
hi
this new rom or this kang rom or what?
this for L29 or just for AL10?
i have L29 debranded to AL10 can i flash this rom over kangb577?
some info please about this rom
thanks
I have a L29C432 and am from C432B560 to Kang AL10 B580.
Hen Ry said:
I have a L29C432 and am from C432B560 to Kang AL10 B580.
Click to expand...
Click to collapse
is developer options working with you?
Can u load the link to Google or megalink for both twrp and b580 custom rom?
hamadazh said:
hi
this new rom or this kang rom or what?
this for L29 or just for AL10?
i have L29 debranded to AL10 can i flash this rom over kangb577?
some info please about this rom
thanks
Click to expand...
Click to collapse
I have L09C432B560 then I installed kangB577. I download the rom from the link and flash this rom over kangB577. This rom is similar to stock rom without gapp and with chinese apps. However the rom is rooted. There is no Kang settings in this rom.
https://mega.nz/#!IRc2Gb4Q!8NJyuJ3VC7wJpHM4EzvgYDwM9RJYeIzaOoZLM2nn8n0
Every thing went ok on L29C185 debrnded to DL00
Thanks great work.
Tried to flash this over a marshmallow rom by accident. Its stuck in "Booting Now" is there a way i can fix this? :/
BrownyDroid said:
Tried to flash this over a marshmallow rom by accident. Its stuck in "Booting Now" is there a way i can fix this? :/
Click to expand...
Click to collapse
You need to get into twrp, full wipe and restore or flash your previous rom.
[email protected] said:
You need to get into twrp, full wipe and restore or flash your previous rom.
Click to expand...
Click to collapse
I fixed it!
If anyone tries to flash from 6.0 to 7.0 and it wont boot, do what i did //
Use EMUI Recovery to grab the latest running version and let that install if you can, and then update it to EMUI 5.0 on AL10
Then install TWRP on 5.0 (I used 3.0.2.0) from this thread = https://forum.xda-developers.com/mate-8/general/twrp-3-0-2-0-mate-8-t3521215
After booting into TWRP on 7.0 the first thing i did was decrypt the data partition by going into Wipe -> Data -> Advanced and then changing it in the Change File System option from ext4 to ext2, and then back from 2 to 4.
It will take 20-30 mins to do going back to ext4, this is normal. then it is DONE
This allowed it to be wiped and decrypted for my AL10 model, otherwise you couldnt access the data partition properly. (And just wiping the data partition didnt work for some reason, not sure it just had errors.)
Then I flashed this rom and everything has gone smoothly since. Not a single worry at all in the world after that, no need to reflash any root privs or anything. Props to everyone for their software/firmwares respectively, I own none of this and am just saying how/what I did to get this working even after screwing it up.
If anyone accidentally flashes 7.0 over 6.0 and it wont boot, try this... ^^
EDIT - Changed, something I did didnt work the second time, fixed.
BrownyDroid said:
I fixed it!
If anyone tries to flash from 6.0 to 7.0 and it wont boot, do what i did //
Use EMUI Recovery to grab the latest running version and let that install if you can, and then update it to EMUI 5.0 on AL10
Then install TWRP on 5.0 (I used 3.0.2.0) from this thread = https://forum.xda-developers.com/mate-8/general/twrp-3-0-2-0-mate-8-t3521215
After booting into TWRP on 7.0 the first thing i did was decrypt the data partition by going into Wipe -> Data -> Advanced and then changing it in the Change File System option from 4 to 1, and then back from 1 to 4.
This allowed it to be wiped and decrypted for my AL10 model, otherwise you couldnt access the data partition properly. (And just wiping the data partition didnt work for some reason, not sure it just had errors.)
Then I flashed this rom and everything has gone smoothly since. Not a single worry at all in the world after that, no need to reflash any root privs or anything. Props to everyone for their software/firmwares respectively, I own none of this and am just saying how/what I did to get this working even after screwing it up.
If anyone accidentally flashes 7.0 over 6.0 and it wont boot, try this... ^^
Click to expand...
Click to collapse
Sorry but i don't understund, in whipe>data>change file system i have ext2, ext3, ext4, fat, exfat, f2fs. What i do? Thanks.
Inviato dal mio SM-N920F utilizzando Tapatalk
Some apps crash while navigating inside. Best example: Google Play Store, after clicking "read more" when showing app details. Other example: In Signal Messenger when entering a conversation.
I flashed Open Gapps Pico version.
Any suggestions?
[email protected] said:
You need to get into twrp, full wipe and restore or flash your previous rom.
Click to expand...
Click to collapse
entonjackson said:
Some apps crash while navigating inside. Best example: Google Play Store, after clicking "read more" when showing app details. Other example: In Signal Messenger when entering a conversation.
I flashed Open Gapps Pico version.
Any suggestions?
Click to expand...
Click to collapse
I never flashed Gapps, i went into HiApp and installed the play store through there and then updated it, worked perfectly.
After i reinstalled the rom because of some errors with the camera i was getting i ended up having some problems with google play services but I just downloaded the latest online and installed it, been smooth since.
AND i can confirm, im not getting and "read more" crashes or Messenger crashes whatsoever. Sorry to hear about your problem! If it keeps happening try backing up data, reflashing the rom or flash stock first then reflash it and try installing google play store through HiApp.
I have a NXT-DL00 with a custom rom , rooted,TWRP etc... can I install your NXT-AL10 version?
batman74 said:
Sorry but i don't understund, in whipe>data>change file system i have ext2, ext3, ext4, fat, exfat, f2fs. What i do? Thanks.
Inviato dal mio SM-N920F utilizzando Tapatalk
Click to expand...
Click to collapse
Sorry! Updated.
I went and changed it from ext4 to ext2 which took only less than 1 min, and then from ext2 to ext4 which took about half an hour.
Then it worked!
(Sorry for the confusion)
---------- Post added at 09:31 AM ---------- Previous post was at 09:28 AM ----------
stratanic said:
I have a NXT-DL00 with a custom rom , rooted,TWRP etc... can I install your NXT-AL10 version?
Click to expand...
Click to collapse
If you try anyways, make sure you make a backup of your current rom before flashing and tell us what you did/results.
If its on a 6.0 rom you can follow the mini guide I had written, get yourself into EMUI 5.0 before you flash it. either by the official updater if you can by Restoring through the EMUI recovery back to stock and updating, or flashing an EMUI 5 rom and getting 3.0.2-0 twrp on there first.
Update : Been running this rom on EMUI 5.0 since release and it is super stable and amazing to run.
Been the best rom ive had on my Mate 8, definitely deserves some more attention. My battery life is about 15-25% better than emui 4.x and the phone doesnt have wakelock and app sleep problems for me at all compared to previous roms ive used.
We just need this rom with Kang VIP and it would be 110% sweet!
Waiting for a release of Xposed to come out so i can test and report back.
ive seen some users installing this rom over the latest kangvip, that way one has best of both worlds
Sent from my Huawei Mate 8 NXT-AL10
jbmc83 said:
ive seen some users installing this rom over the latest kangvip, that way one has best of both worlds
Sent from my Huawei Mate 8 NXT-AL10
Click to expand...
Click to collapse
Hi jbmc....how to do? You mean flash kang and then dirty flash HRT? How will have both functionalities?
Also, in OP it is not clear what to wipe and what not to...
"Card brush is not necessary after the success of double-clear, otherwise it may lead to ROOT failure"....what this means exactly?
There is a new hrt b584 version available , I saw it available on the Chinese website but don't have baidu
Hello mates, Here is
D5503_Customized IN_1281-0184_14.6.A.1.236_R3D Prerooted Flashable Zip for Sony Xperia Z1 Compact Locked Bootloader
Made by PRFCreator_v1.3
You need only rooted phone and TWRP
For Root Xperia Z1C : https://forum.xda-developers.com/xperia-z1/general/root-xperia-z1-lollipop-5-1-1-build-14-t3246373
Or you can any well known and safe method for rooting. I have use kingroot 4.5.2.apk, after root I installed Z1C-lockeddualrecovery2.8.26.
For Dual Recovery : https://forum.xda-developers.com/showthread.php?t=2647480
In this creation you will get Stock Sony Rom 5.1.1.{ rooted with SuperSu (2.46) and Z1C-lockeddualrecovery2.8.26 }
How to Install:
1. Download file
2. Copy this zip in your sd card or internal memory( In recovery you can change default storage )
3. Boot to recovery (Use TWRP)
4. Wipe data,Cache and Dalwik Cache
5. install flashable-prerooted-signed.zip
6. Reboot to System
I have flashed on Stock Sony 14.6.A.1.236 in my Xperia Z1 Compact and tested everything is working good. There isn’t any problem in this rom. After installation this rom we can remove System apps, Ringtones etc… which are we don’t use.
In this rom I didn’t added Xposed. So you can install later.I have installed xposed-v84-sdk22-arm after flash rom.
Download Link : https://drive.google.com/open?id=0B2DnyFUiK93lZW1ncXlLd19JSDg
MD5: 3137f4b552a991d8cb8936749b772528
Download Link for Prerooted Zip with Xposed and SU 2.79 : https://1drv.ms/u/s!AqRWEkw4JbcJhBZESlNAZ2S-H0gJ
MD5: a36e3db078d8f8c0b0cca46f675f3259
how to install
How to install including md5?
jmcatamora said:
How to install including md5?
Click to expand...
Click to collapse
How to Install:
1. Download file
2. Copy this zip in your sd card or internal memory( In recovery you can change default storage )
3. Boot to recovery (Use TWRP)
4. Wipe data,Cache and Dalwik Cache
5. install flashable-prerooted-signed.zip
6. Reboot to System
There is no need to including md5, it is for checking purpose is your downloaded file is corrupted or not.
thank you
Can you help me . How to install xpose .??plz show me the download file xposed-v84-sdk22-arm and the framework.
jmcatamora said:
Can you help me . How to install xpose .??plz show me the download file xposed-v84-sdk22-arm and the framework.
Click to expand...
Click to collapse
Thanks to rovo89 for xposed support .
This is the link for download xposed framework
http://dl-xda.xposed.info/framework/sdk22/arm/
Detailed instructions for installation go to this link
https://forum.xda-developers.com/showthread.php?t=3034811
Thanks a ton for this! Worked awesome!
Since I went from stock 5.0.2 -> 5.1.1 ... I tried not wiping data and it seems everything still works fine! My apps, settings and data are all there =) ... so far w/o bugs.
I installed cyberian 7.1 camera(primary reason for my attempt at the upgrade) ... and seems to be working 100% w/o issue =)
GenTarkin said:
Thanks a ton for this! Worked awesome!
Since I went from stock 5.0.2 -> 5.1.1 ... I tried not wiping data and it seems everything still works fine! My apps, settings and data are all there =) ... so far w/o bugs.
I installed cyberian 7.1 camera(primary reason for my attempt at the upgrade) ... and seems to be working 100% w/o issue =)
Click to expand...
Click to collapse
Happy to know it is working on without wiping data.
PARESH AHAR said:
Happy to know it is working on without wiping data.
Click to expand...
Click to collapse
An update, its still working amazingly bug free!!! (w/o data wipe)
Also, *I think* battery life has much improved ... but that may be because I wiped cache and also turned off Stamina mode after reading it sucks battery life rather than help it lol!
I did run into some battery level quirkiness within the first few days of install, but hoping it was just some learning curve the OS had to do w/ battery ... time will tell =)
I do have a question tho, just noticed you state the bootloader/recovery is "locked"? Does this overwrite my previous "unlocked" state and its relocked now? Or does an unlocked state persist? Thanks
GenTarkin said:
I do have a question tho, just noticed you state the bootloader/recovery is "locked"? Does this overwrite my previous "unlocked" state and its relocked now? Or does an unlocked state persist? Thanks
Click to expand...
Click to collapse
No,this doesn't overwrite your unlocked bootloader. your unlocked state is persist.You can check by dialing *#*#7378423#*#* /Service info/Configuration/Rooting status:
Sad update, seems my phone has fallen victim to the "LP upgrade & damaged battery" coincidence =( ... I know its not a fault of ur ROM. Phone works fine from 100% to 50% then a 50% it rapidly drops to 1% and shuts off =/
That being said, ordered a replacement battery kit + back door + NFC tag. Hopefully normal battery functionality will be restored after its replaced =)
Seems to be a widespread problem =/ Its weird because I had LP 5.0.2 on it previously.
Battery replacement went well, back to full expected usage time!
blank screen after sony logo what should i do i have an unlock bootloader TWRP 3.0.2 on FotaKernel
nhicko95 said:
blank screen after sony logo what should i do i have an unlock bootloader TWRP 3.0.2 on FotaKernel
Click to expand...
Click to collapse
Bro I have tried locked bootloader. But I think GenTarkin installed on unlocked bootloader successful. First you should flash stock.ftf and after go further as first post.
Dirty flash I love you dirty flash blahblahblah
Thanks for this, just what I needed without the hasle as Gen said I just flashed over the rom I was using (mx 8.5), wiped dalvik and that other thing but kept data and now my phones overheating has stopped, installed xposed and my tweaks reinstalled themselves... Because of the dirty flash some of the apps needed updating but apart from that its ask good... Nice one
Update Zip
Zip is updated with Xposed and SU 2.79
Download Link : https://1drv.ms/u/s!AqRWEkw4JbcJhBZESlNAZ2S-H0gJ
Is there an Arabic language?
azoga said:
Is there an Arabic language?
Click to expand...
Click to collapse
Stock languages
There is a problem with Facebook and Messenger app (normal, not lite versions). When my girlfriend is trying to run these apps the screen just is just blinking (black&white) every 0,5 of sec. and nothing else is happening. Reinstalling those apps does not solve the problem.
watchoutbehindyou said:
There is a problem with Facebook and Messenger app (normal, not lite versions). When my girlfriend is trying to run these apps the screen just is just blinking (black&white) every 0,5 of sec. and nothing else is happening. Reinstalling those apps does not solve the problem.
Click to expand...
Click to collapse
You need to install an older version of facebook.
14.3.b.0.310
Can i flash this rom from stock rom 14.3.b.0.310?
No more development from me.
XDA:DevDB Information
TWRP for the Hauwei P10 Lite, Tool/Utility for the Huawei P10 Lite
Contributors
Meticulus
Source Code: http://github.com/Meticulus
Version Information
Status: Testing
Created 2017-12-05
Last Updated 2018-01-18
Good work!!
You guys ready for custom ROMs?
This is my WAS-LX3 Running my Pure AOSP for HI6250 Devices! Installation is a bit tricky but I'll fix that up soon!
Great work!
Just tested it on my P10 lite(was-lx1c432), and it works.
Thanks for your work. I haven't tried it yet. I'm waiting for your custom Rom.
With Devcheck system info (search in playstore) I saw that my device is compatible.
Hi, I flashed it on my WAS-LX1C432 but it freezes at the screen where it asks about allowing modifications to the system partition. The build from the other thread works though, apart from decryption.
Cannot wait to get aosp good work!!
Ra2rd said:
Cannot wait to get aosp good work!!
Click to expand...
Click to collapse
Stock decryption not working here either
I have not found any easy way to get back to stock...
When i tried to flash the zip with the other TWRP build, i got error 7 : This build is for Washington, not for Warsaw.
So, i flashed the img with fastboot and it works.
Also after allowing modifications at first boot of TWRP, i don't get that msg anymore.
With the other build i had to allow it everytime i booted TWRP.
I have WAS-LX1AC432
waaagh313ph4n7 said:
Hi, I flashed it on my WAS-LX1C432 but it freezes at the screen where it asks about allowing modifications to the system partition. The build from the other thread works though, apart from decryption.
Click to expand...
Click to collapse
Touch unresponssive happened to also. I've just rebooted into recovery again. Solved.
This build works like a charm
Encryption of data will be always a problem on kirin devices ...
[email protected]@[email protected] said:
When i tried to flash the zip with the other TWRP build, i got error 7 : This build is for Washington, not for Warsaw.
So, i flashed the img with fastboot and it works.
Also after allowing modifications at first boot of TWRP, i don't get that msg anymore.
With the other build i had to allow it everytime i booted TWRP.
I have WAS-LX1AC432
Click to expand...
Click to collapse
Washington? Which device is Washington?... Other twrp is port from Washington?
WAS-TL10C01B220 cmcc/cn is work.
Tnx
Meticulus said:
Washington? Which device is Washington?... Other twrp is port from Washington?
Click to expand...
Click to collapse
I forgot to make a pic. That's what i remember. Maybe I saw or did something wrong.
Edit :
Found this with Google
https://www.frequencycheck.com/models/Az88E/huawei-p10-lite-dual-sim-lte-was-lx3-huawei-washington
[email protected]@[email protected] said:
I forgot to make a pic. That's what i remember. Maybe I saw or did something wrong.
Edit :
Found this with Google
https://www.frequencycheck.com/models/Az88E/huawei-p10-lite-dual-sim-lte-was-lx3-huawei-washington
Click to expand...
Click to collapse
Oh geez I didn't know about Washington. I thought all P10 Lite was Warsaw...:silly:
Meticulus said:
Oh geez I didn't know about Washington. I thought all P10 Lite was Warsaw...:silly:
Click to expand...
Click to collapse
Me too.
With your twrp build I tried to flash the recovery again. The zip file. And this time I didn't get any errors.
How's the progress on your rom?
I would be happy to test it.
[email protected]@[email protected] said:
Me too.
With your twrp build I tried to flash the recovery again. The zip file. And this time I didn't get any errors.
How's the progress on your rom?
I would be happy to test it.
Click to expand...
Click to collapse
The ROM is pretty good. I'm just concerned about ppl being able to go back to stock. Because the ROM is not a daily driver yet..,
Rear cam video capture not working.
Little laggies happen during ui animation.
Edit: If you are confident you can get back to stock if you need to pm me.
Any Other Testers?
If there is anyone else who is confident they can get back to stock via the 'dload' method and would like to test AOSP for the P10 Lite, pm me.
Worked for me. I needed to do a full wipe in TWRP first. ( i wiped data too, dunno if it was needed)
Flashed open gapps 7.1 pico.
There is no browser or file manager included in the rom.
So after setting up playstore, download a file manager if you need to access your ext sdcard.
Flashed supersu in twrp and have root too.
---------- Post added at 06:42 PM ---------- Previous post was at 06:15 PM ----------
Restored my apps and data with titanium Backup.
Working fine.
Maybe create a new topic for this ROM?
I made a TWRP backup. Selected everything except /cache.
With 3 button dload method i was able to go back to stock rom.
Unlocked bootloader again, flashed TWRP and then tried to restore the backup.
Got a 255 error. So i did a full wipe and formatted /data.
After this succesfully restored the backup and phone booted normally with everything intact.
So, internal storage is not encrypted in TWRP.
Rom is pretty smooth. Didn't encouter any issues. Except the known bugs.
Finger print is working, GPS too.
Didn't test NFC or dual sim.
Will use this rom and see how it goes.
edit :
Made a "tap and pay" payment in the supermarket. So NFC is working.
[email protected]@[email protected] said:
Worked for me. I needed to do a full wipe in TWRP first. ( i wiped data too, dunno if it was needed)
Flashed open gapps 7.1 pico.
There is no browser or file manager included in the rom.
So after setting up playstore, download a file manager if you need to access your ext sdcard.
Flashed supersu in twrp and have root too.
---------- Post added at 06:42 PM ---------- Previous post was at 06:15 PM ----------
Restored my apps and data with titanium Backup.
Working fine.
Maybe create a new topic for this ROM?
Click to expand...
Click to collapse
I'll create new topic for this 2morrow...:highfive: