Hello everyone,
First of all I would like to thank all of you in the community for being so engaged and eager to help out when something turns out in another direction as expected. Without your help so many would be left in complete darkness.
Let's start with my conclusion first:
I need either a BIN file for my phone which can be installed using LGNPST, or
A ROM file which can be installed using TWRP from TeenyBin recovery without verification errors on zip or phone assertion, or
A third – and to me unknown – solution which brings me closer to an unbricked phone.
Phone facts:
LG-E975, S/N: 303KPUU181542
TWRP 2.5.0.0 installed together with LGNPST TeenyBin
From the fastboot screen
PRODUCT NAME mako
VARIANT mako 32GB
HW VERSION rev_11 (&¤)
BOOTLOADER VERSION MAKOZ10f
BASEBAND VERSION N/A
CARRIER INFO None
SERIAL NUMBER xxxxx
SIGNING production
SECURE BOOT Enabled
LOCK STATE UNLOCKED
LG KDZ file identified is: E97510D_00
Sequence of things so far
1) As all my previous Android phones I use CWM for backup and testing new ROM’s I installed this on my Optimus G and rooted the device. Also upgraded CWM recovery to latest version, (not touch though)
2) After that it was not possible to boot into recovery due to ‘some’ error – I therefore changed recovery to built-in TWRP. Boot to recovery now gave Secure Boot Error – certification
NOTE: I found somewhere that rooting is NOT enough you also have to unlock, (FreeGee?). Could someone please confirm or reject?
3) Now I turned to “[REPAIR] TeenyBin - Softbrick Quick Fix / Bootloader Unlock [E971, E973, E975, F180*]” using LGNPST and TeenyBin. Finally something happened – I could access the TWRP built in.
4) Then I used ADB to push ROM to the internal SDCARD and recovery to install. But this method failed – tried several ROMs which all gave errors initially. I discovered that the install script pointed at “e975” in(ro.product.device and ro.build.product but the phone reports “geehrc4g”
This is the output in recovery.log when trying to flash ROM
Warning: No file_contexts
script aborted: assert failed: getprop("ro.product.device") == "e975" || getprop("ro.build.product") == "e975"
assert failed: getprop("ro.product.device") == "e975" || getprop("ro.build.product") == "e975"
Following the advice of changing the script by
a. Deleting the ‘assert’ line in the script, or
b. Changing the element to what the phone reports did not help
NOTE: I have seen someone claim that you should do this without unzipping first. I cannot see how this can be done. Please confirm if you have any knowledge on this. If unzip and zip causes the problem below – then what is the solution?
Changing the product device and build leads to this in recovery.log
E:Zip signature verification failed: 1
Error flashing zip '/sdcard/thinkingbridge.zip'
Updating partition details...
To ensure working environment I tried to flash gapps which worked perfectly so connection and recovery must be functional.
5) Now turning to: ”[GUIDE] How to UNBRICK your Optimus G - security error, bootloop etc”
I used the method described and downloaded the appropriate KDZ file etc. etc but flashing gives this log:
10:05:58 : Launching SW update
10:05:58 : Unpacking KDZ
10:06:05 : KDZ file extracted
10:06:13 : Files were extracted.
10:06:13 : LGMobileDL Load.
10:06:13 : Port = -1
10:06:13 : Connecting to phone
10:06:25 : Check Phone mode = 2
10:06:25 : Phone type check.......
10:06:26 : LGMobileDL.DLL Loading....
10:06:26 : _SetAuthMark Fail
10:06:26 : _SetAuthMark Ok : wAuthMark(65535)
10:06:26 : _DetachDLL Call
10:06:26 : _DetachDLL Call End
10:06:26 : ParamPhone\E97510
10:06:26 : Param : waitTime = 0
10:06:26 : Param : UsbHighSpeed = 1
10:06:26 : Param : PhoneMode = 2
10:06:26 : Param : BinVersion = E97510D_00
10:06:26 : Param : AuthMark = 65535
10:06:26 : Call fn_StartUpgrade
10:09:27 : 3GQCT : wParam = 100, lParam = 210
10:09:27 : Step : Upgrade Error error code = 210
10:09:27 : ResetStartInfo() Call
10:09:27 : _DetachDLL Call
10:09:27 : _DetachDLL Call End
10:09:27 : FreeLibrary Call
10:09:27 : FreeLibrary Call End
10:09:27 : ResetStartInfo() Call End
10:09:29 : ===FINISHED===
At the point where KDZ file is extracted the phone reverts from download mode to recovery which is probably why it fails.
Looking in the forums these problems are rather common and the suggestions are multiple. I hope to be able to get this problem solved with the help from the community and if possible condense whatever the experience and conclusions must be in a guide to help others in this situation. Thanks very much in advance.
Better use KDZ updater for files smaller than 1gb.for bigger files use flashtool.
Also,have you tried emergency recovery from lg mobile tool?since you are on stock,it should work.
kimitza said:
Better use KDZ updater for files smaller than 1gb.for bigger files use flashtool.
Also,have you tried emergency recovery from lg mobile tool?since you are on stock,it should work.
Click to expand...
Click to collapse
Hi Kimitza,
Thanks for your reply. I did discover the 1GB issue during my quest. Unfortunately I havn't found any smaller images in the KDZ format. Also afraid of getting an image incompatible which could end up finalizing the bricking of my phone
Regarding the stock thing I did try restoring using the LG Mobile Tool - but that also ended in an error where the tool asked me to disconnect the usb cable, restart the device and reconnect after the analysis. But I am unable to boot beyond fastboot and recovery.
I have a hunch that the TeenyBin could be the key to my issues. If - which I don't know - it has put "wrong" identity, (ro.product.device and ro.build.product), into "a" system file then changing this could be the way forward to use the recovery tool.
Do you think this is possible? And if do you know where the system keeps this information?
Cheers Klavs
it's in build.prop i think.
if your files are bigger,use flashtool.
https://xq55.app.box.com/s/89wvuj27cfd6jahqojoe
Hi there,
I'm stuck currently on exactly the same problem.
Actually i had my LGOG perfectly working with some CM10.1 Nightly build and yesterday i upgraded to CM10.2 Nightly (i also had to remove the first line of install script of the *.zip file, but this worked for me perfectly well in the past).
The upgrade process itself also worked fine, but when i rebooted my device the first time today, it got stuck on the CM boot screen animation.
Also Flashing the kdz file produced for me the same output (also with flashtool).
Finally i flashed another TeenyBin (the file is named "LS970_Original_TeenyBin-AA.bin" - i downloaded it the first time i unlocked my phone and I actually can't tell you where it is from) and after that flashing the kdz File worked for me (or at least, now it is installing).
Hope this helps you!
Edit:
My phone is working again (on CM10.1.3-RC2).
My Steps:
1. flash "E971.E973.E975.F180_Original_TeenyBin-AA.bin" via LGNPST
2. Boot to recovery
3. Download the zip file of the rom
4. Remove the first line of the "updater-script"
5. push the zip via adb to /sdcard
6. install the zip via recovery
7. it worked
Flashing the kdz file ended in a stuck boot-logo...
Good luck
What's the command to push the zip to the device. I'm getting lost reading all the info online.
Sent from my SGH-I317M using Tapatalk 4
nelly_85 said:
What's the command to push the zip to the device. I'm getting lost reading all the info online.
Sent from my SGH-I317M using Tapatalk 4
Click to expand...
Click to collapse
adb push xxx.zip /sdcard/
adb devices should show you device otherwise see if adb is setup correctly.
klavslund said:
Hello everyone,
First of all I would like to thank all of you in the community for being so engaged and eager to help out when something turns out in another direction as expected. Without your help so many would be left in complete darkness.
Let's start with my conclusion first:
I need either a BIN file for my phone which can be installed using LGNPST, or
A ROM file which can be installed using TWRP from TeenyBin recovery without verification errors on zip or phone assertion, or
A third – and to me unknown – solution which brings me closer to an unbricked phone.
Phone facts:
LG-E975, S/N: 303KPUU181542
TWRP 2.5.0.0 installed together with LGNPST TeenyBin
From the fastboot screen
PRODUCT NAME mako
VARIANT mako 32GB
HW VERSION rev_11 (&¤)
BOOTLOADER VERSION MAKOZ10f
BASEBAND VERSION N/A
CARRIER INFO None
SERIAL NUMBER xxxxx
SIGNING production
SECURE BOOT Enabled
LOCK STATE UNLOCKED
LG KDZ file identified is: E97510D_00
Sequence of things so far
1) As all my previous Android phones I use CWM for backup and testing new ROM’s I installed this on my Optimus G and rooted the device. Also upgraded CWM recovery to latest version, (not touch though)
2) After that it was not possible to boot into recovery due to ‘some’ error – I therefore changed recovery to built-in TWRP. Boot to recovery now gave Secure Boot Error – certification
NOTE: I found somewhere that rooting is NOT enough you also have to unlock, (FreeGee?). Could someone please confirm or reject?
3) Now I turned to “[REPAIR] TeenyBin - Softbrick Quick Fix / Bootloader Unlock [E971, E973, E975, F180*]” using LGNPST and TeenyBin. Finally something happened – I could access the TWRP built in.
4) Then I used ADB to push ROM to the internal SDCARD and recovery to install. But this method failed – tried several ROMs which all gave errors initially. I discovered that the install script pointed at “e975” in(ro.product.device and ro.build.product but the phone reports “geehrc4g”
This is the output in recovery.log when trying to flash ROM
Warning: No file_contexts
script aborted: assert failed: getprop("ro.product.device") == "e975" || getprop("ro.build.product") == "e975"
assert failed: getprop("ro.product.device") == "e975" || getprop("ro.build.product") == "e975"
Following the advice of changing the script by
a. Deleting the ‘assert’ line in the script, or
b. Changing the element to what the phone reports did not help
NOTE: I have seen someone claim that you should do this without unzipping first. I cannot see how this can be done. Please confirm if you have any knowledge on this. If unzip and zip causes the problem below – then what is the solution?
Changing the product device and build leads to this in recovery.log
E:Zip signature verification failed: 1
Error flashing zip '/sdcard/thinkingbridge.zip'
Updating partition details...
To ensure working environment I tried to flash gapps which worked perfectly so connection and recovery must be functional.
5) Now turning to: ”[GUIDE] How to UNBRICK your Optimus G - security error, bootloop etc”
I used the method described and downloaded the appropriate KDZ file etc. etc but flashing gives this log:
10:05:58 : Launching SW update
10:05:58 : Unpacking KDZ
10:06:05 : KDZ file extracted
10:06:13 : Files were extracted.
10:06:13 : LGMobileDL Load.
10:06:13 : Port = -1
10:06:13 : Connecting to phone
10:06:25 : Check Phone mode = 2
10:06:25 : Phone type check.......
10:06:26 : LGMobileDL.DLL Loading....
10:06:26 : _SetAuthMark Fail
10:06:26 : _SetAuthMark Ok : wAuthMark(65535)
10:06:26 : _DetachDLL Call
10:06:26 : _DetachDLL Call End
10:06:26 : ParamPhone\E97510
10:06:26 : Param : waitTime = 0
10:06:26 : Param : UsbHighSpeed = 1
10:06:26 : Param : PhoneMode = 2
10:06:26 : Param : BinVersion = E97510D_00
10:06:26 : Param : AuthMark = 65535
10:06:26 : Call fn_StartUpgrade
10:09:27 : 3GQCT : wParam = 100, lParam = 210
10:09:27 : Step : Upgrade Error error code = 210
10:09:27 : ResetStartInfo() Call
10:09:27 : _DetachDLL Call
10:09:27 : _DetachDLL Call End
10:09:27 : FreeLibrary Call
10:09:27 : FreeLibrary Call End
10:09:27 : ResetStartInfo() Call End
10:09:29 : ===FINISHED===
At the point where KDZ file is extracted the phone reverts from download mode to recovery which is probably why it fails.
Looking in the forums these problems are rather common and the suggestions are multiple. I hope to be able to get this problem solved with the help from the community and if possible condense whatever the experience and conclusions must be in a guide to help others in this situation. Thanks very much in advance.
Click to expand...
Click to collapse
Can you kindly tell me how you ware able to start kdz upgrading process, because I am in TWRP (i.e. bootlocker unlocked + paranoid android rom + no service) and I cannot go into downloading mode :/ (in order to revert back to stock)
Soft-brick
Hello everyone,
I soft bricked my phone that resulted in bootloop
I can only go to download mode. fastboot mode and recovery mode not possible
I tried to unbrick using custom rom and kdz updater but i cannot download kdz stock rom as i am new user it comes access denied.
Please help me... I need indian version stock rom for lg optimus G e975
sirfrajput said:
Can you kindly tell me how you ware able to start kdz upgrading process, because I am in TWRP (i.e. bootlocker unlocked + paranoid android rom + no service) and I cannot go into downloading mode :/ (in order to revert back to stock)
Click to expand...
Click to collapse
I've had the exact same problem... and I also don't know how to access Download Mode manually.
I found a way to go around the situation... and it was by flashing a Stock ROM zip file (and already Rooted!!)
It is a LG Stock ROM turned into a flashable zip file, which you can install via Recovery like any Custom ROM. It is Indian firmware version E97510e-IND-XX, but it has english language.
You can find it here:
http://forum.xda-developers.com/showthread.php?t=2407489
Go into Recovery, and flash the Stock ROM zip file, and the Keyboard-fix immediately after (or you be flooded with Force-Closes after reboot), also don't forget to wipe Data, Cache and Dalvik before rebooting to System, or you will be stuck with a bootloop situation.
When you get to your new LG Stock ROM system, you can either stay with this ROM (which is rooted and deodexed!), or you can change it!!
You will now be able to select "LG Software" on the USB connection type, and from there update to a newer firmware version via LG Mobile Support Tool, or to a firmware version of your choosing via KDZ Updater or Flash Tools... Flash Tools being the best method to choose, because it will not have KDZ extraction failures/issues.
See the link bellow for LG E975 firmware KDZ files...
tabrezak said:
Hello everyone,
I soft bricked my phone that resulted in bootloop
I can only go to download mode. fastboot mode and recovery mode not possible
I tried to unbrick using custom rom and kdz updater but i cannot download kdz stock rom as i am new user it comes access denied.
Please help me... I need indian version stock rom for lg optimus G e975
Click to expand...
Click to collapse
You will find it here!!
http://lg-phone-firmware.com/index.php?id_mod=20
mitushorizon said:
I've had the exact same problem... and I also don't know how to access Download Mode manually.
I found a way to go around the situation... and it was by flashing a Stock ROM zip file (and already Rooted!!)
It is a LG Stock ROM turned into a flashable zip file, which you can install via Recovery like any Custom ROM. It is Indian firmware version E97510e-IND-XX, but it has english language.
You can find it here:
http://forum.xda-developers.com/showthread.php?t=2407489
Go into Recovery, and flash the Stock ROM zip file, and the Keyboard-fix immediately after (or you be flooded with Force-Closes after reboot), also don't forget to wipe Data, Cache and Dalvik before rebooting to System, or you will be stuck with a bootloop situation.
When you get to your new LG Stock ROM system, you can either stay with this ROM (which is rooted and deodexed!), or you can change it!!
You will now be able to select "LG Software" on the USB connection type, and from there update to a newer firmware version via LG Mobile Support Tool, or to a firmware version of your choosing via KDZ Updater or Flash Tools... Flash Tools being the best method to choose, because it will not have KDZ extraction failures/issues.
See the link bellow for LG E975 firmware KDZ files...
You will find it here!!
http://lg-phone-firmware.com/index.php?id_mod=20
Click to expand...
Click to collapse
Dear it is simple to go in download mode manually, at the fast boot screen do the following...
Connect mobile to pc
Select power off and as soon as your mobile screen go black
Quickly press both volume buttons+power button and pull the cable out, and connect again (while all buttons are pressed).... And voila! You are in download mode
PS. You need to put your phone in download mode if while flashing kdz your mobile gets restarted....
mitushorizon said:
I've had the exact same problem... and I also don't know how to access Download Mode manually.
I found a way to go around the situation... and it was by flashing a Stock ROM zip file (and already Rooted!!)
It is a LG Stock ROM turned into a flashable zip file, which you can install via Recovery like any Custom ROM. It is Indian firmware version E97510e-IND-XX, but it has english language.
You can find it here:
http://forum.xda-developers.com/showthread.php?t=2407489
Go into Recovery, and flash the Stock ROM zip file, and the Keyboard-fix immediately after (or you be flooded with Force-Closes after reboot), also don't forget to wipe Data, Cache and Dalvik before rebooting to System, or you will be stuck with a bootloop situation.
When you get to your new LG Stock ROM system, you can either stay with this ROM (which is rooted and deodexed!), or you can change it!!
You will now be able to select "LG Software" on the USB connection type, and from there update to a newer firmware version via LG Mobile Support Tool, or to a firmware version of your choosing via KDZ Updater or Flash Tools... Flash Tools being the best method to choose, because it will not have KDZ extraction failures/issues.
See the link bellow for LG E975 firmware KDZ files...
You will find it here!!
http://lg-phone-firmware.com/index.php?id_mod=20
Click to expand...
Click to collapse
"i hit already thanx button dude" many thax you save my lovely G the only way for me to go back to stock because neither my phone goes to download mode before now i'm in stock greek rom thanx to you :good: must be in question and support section this threat
sirfrajput said:
Dear it is simple to go in download mode manually, at the fast boot screen do the following...
Connect mobile to pc
Select power off and as soon as your mobile screen go black
Quickly press both volume buttons+power button and pull the cable out, and connect again (while all buttons are pressed).... And voila! You are in download mode
PS. You need to put your phone in download mode if while flashing kdz your mobile gets restarted....
Click to expand...
Click to collapse
But my phone wouldn't enter in download mode with any key combination, thus my problem and thus my solution!
mitushorizon said:
But my phone wouldn't enter in download mode with any key combination, thus my problem and thus my solution!
Click to expand...
Click to collapse
You have to press both both volume buttons after selecting the power off....
I dont know... my phone always go in download mode this way
mitushorizon said:
I've had the exact same problem... and I also don't know how to access Download Mode manually.
I found a way to go around the situation... and it was by flashing a Stock ROM zip file (and already Rooted!!)
It is a LG Stock ROM turned into a flashable zip file, which you can install via Recovery like any Custom ROM. It is Indian firmware version E97510e-IND-XX, but it has english language.
You can find it here:
http://forum.xda-developers.com/showthread.php?t=2407489
Go into Recovery, and flash the Stock ROM zip file, and the Keyboard-fix immediately after (or you be flooded with Force-Closes after reboot), also don't forget to wipe Data, Cache and Dalvik before rebooting to System, or you will be stuck with a bootloop situation.
When you get to your new LG Stock ROM system, you can either stay with this ROM (which is rooted and deodexed!), or you can change it!!
After this step my phone keeps giving me a kernel error,
You will now be able to select "LG Software" on the USB connection type, and from there update to a newer firmware version via LG Mobile Support Tool, or to a firmware version of your choosing via KDZ Updater or Flash Tools... Flash Tools being the best method to choose, because it will not have KDZ extraction failures/issues.
See the link bellow for LG E975 firmware KDZ files...
You will find it here!!
http://lg-phone-firmware.com/index.php?id_mod=20
Click to expand...
Click to collapse
I do those exact steps and my phone starts with LG logo and after a few seconds the phone is on, i'll get an kernel error,
DemiGod Crash Handler : Kernel Crash! :
Press key to choose Dload Mode/Reboot/Fastboot
1)Volume Up: Dload Mode.
2) Volume Down: Reboot.
3) Power: Fastboot.
If you choose Dload Mode,
Please do following action.
1)Dload Mode. Please connect USB
2) Get the ram dump image using QCT's Memory Debug App
3) Send em-mail to contact point or [email protected].
and crashes, my phone is a e975.
Can't enter download mode, only have the options" Start" " Restart Bootloader", "Recovery mode", and power off.
Can anyone help me??
Assuming that the flashing of the stock ROM zip file was successful, things should be working fine...
But If they are not...
1 - Try entering into your Custom Recovery, and wipe Data, Cache, Dalvik-cache and System. (but not the Boot partition)
- flash the ROM zip file again and flash the keyboard fix immediately after.
- Wipe Data, Cache and Dalvik-cache again (but not the System nor the Boot partitions).
- Reboot! You should be fine.
If not... If you get stuck at boot due to Kernel issues...
2 - then go into your Custom Recovery, and flash a new Kernel, a suitable Kernel for LG E975 with 4.1.2 Jelly bean.
- after that wipe Data, Cache and Dalvik-cache (but not System nor Boot).
- and Reboot!
mitushorizon said:
Assuming that the flashing of the stock ROM zip file was successful, things should be working fine...
But If they are not...
1 - Try entering into your Custom Recovery, and wipe Data, Cache, Dalvik-cache and System. (but not the Boot partition)
- flash the ROM zip file again and flash the keyboard fix immediately after.
- Wipe Data, Cache and Dalvik-cache again (but not the System nor the Boot partitions).
- Reboot! You should be fine.
If not... If you get stuck at boot due to Kernel issues...
2 - then go into your Custom Recovery, and flash a new Kernel, a suitable Kernel for LG E975 with 4.1.2 Jelly bean.
- after that wipe Data, Cache and Dalvik-cache (but not System nor Boot).
- and Reboot!
Click to expand...
Click to collapse
First of all thanks for reply so soon, i've instaled another kernel , and seems to be working, but i've no network signal. and still dont have way to enter download mode so i can go back to stock. any ideias how to get into download mode??
To enter Download Mode do the following :
- turn off your phone,
- press and hold both "volume down" and "volume up" buttons,
- while holding those buttons connect your phone to PC via USB. (phone should enter download mode)
But wait... haven't you flashed the Indian stock ROM?
Isn't it already working? If yes, then you are already on Stock 4.1.2! More precisely, the E97510e-IND-XX stock firmware. Confirm this!
This means, you are on stock firmware but with Custom Recovery and Custom Bootloader!
Now, you don't need "Download Mode"!
If you want to update the firmware of your LG E975, or if you also want to get back to stock Recovery and stock Bootloader, then...
- install E975 up-to-date drivers and "LG Mobile Support Tool" on your computer, and reboot.
- on your phone go to Settings > Connection > PC Connection and choose the "LG Software" connection type,
- then connect your phone to computer via USB.
- and run LG Mobile Support Tool to update!
mitushorizon said:
To enter Download Mode do the following :
- turn off your phone,
- press and hold both "volume down" and "volume up" buttons,
- while holding those buttons connect your phone to PC via USB. (phone should enter download mode)
But wait... haven't you flashed the Indian stock ROM?
Isn't it already working? If yes, then you are already on Stock 4.1.2! More precisely, the E97510e-IND-XX stock firmware. Confirm this!
This means, you are on stock firmware but with Custom Recovery and Custom Bootloader!
Now, you don't need "Download Mode"!
If you want to update the firmware of your LG E975, or if you also want to get back to stock Recovery and stock Bootloader, then...
- install E975 up-to-date drivers and "LG Mobile Support Tool" on your computer, and reboot.
- on your phone go to Settings > Connection > PC Connection and choose the "LG Software" connection type,
- then connect your phone to computer via USB.
- and run LG Mobile Support Tool to update!
Click to expand...
Click to collapse
Your right i'm with stock firmware but with a custom recovery and bootloader.
Follow all your instructions to use LG Mobile Support Tool, but when it goes to install update it says that the pnone is not connected ??!!??
Restarted the phone and pc same thing happened again.
This started after i tried to unbrick my phone using teenybin, since that time teenybin changed my recovery and bootloader, and i dont' know how to put stock recovery and bootloader if i can't go to download mode.
Thanks
Ok, but the bootloader is only there to boot the device either to Recovery or to Android, if you can get to Android operating system then the bootloader doesn't matter anymore. (at least until you reboot.)
Answer the following:
Do you have a Firewall or Anti-vírus or anti-"something" software that may be blocking the connection between your phone and the PC?
Have you installed the latest drivers for LG E975 from LG site?
When you connect your phone to the PC, is the phone properly recognized by the PC?
If you turn on "USB Debugging" on your phone can you get ADB connection?
Did your phone had "LG Software" option selected when you connected it to the LG Mobile Support Tool?
Did you use the original USB cable of your phone?
If the problem with the connection is related to the LG E975 drivers, you may want to try this...
- run LG Mobile Support Tool (without connecting your phone) and on the left you have an option to manual select and install the drivers of your phone.
- after that search your PC for a folder named "LGMOBILEAX" and erase it.
- reboot your PC.
- run LG Mobile Support Tool again and connect your phone (in "LG Software" mode) to PC and select the option to recover the phone, "Update Recovery".
If the problem with the connection is not related to the drivers, try this...
- Go to Google Play and install the "FreeGee" app on your phone.
- and run the app. (make sure you have Root and Busybox properly working before running FreeGee)
- on FreeGee select either CWM or TWRP. (but I recommend TWRP.)
{If all goes well, this will install the CWM / TWRP custom recovery and a proper bootloader to your phone (much more complete then TeenyBin bootloader.)}
- when FreeGee is done, turn off your phone.
- now try to enter into Download Mode...
To enter Download Mode do the following :
- turn off your phone, (if is not already)
- press and hold both "volume down" and "volume up" buttons,
- while holding those 2 buttons connect your phone to PC via USB. (please use the original USB cable)
Try at least 2 or 3 times to enter into Download Mode, since the procedure is tricky... It only takes one button not being pressed properly for the procedure to fail.
Galaxy a70 a705fn stuck on partition
<!>
boot reason boot : hash of data does not match digest in description . (2nd) (3)
Calculated hash of (boot) : F5877D7EDC. (VEMETA) : 98EEF63C0
SAMSUNG boot. A706FNXXU5BTE3, 31342670R
VBMETA A705FNXXU5BTC2, 296911020R
Plz i cant flash stock firmware now it happened after a minor update
Same here but with the following parameters:
boot reason boot : hash of data does not match digest in description . (2nd) (3)
Calculated hash of (boot) : A7681EDC3D. (VEMETA) : 98EEF63C0
SAMSUNG boot. A705FNXXU5BTF1, 31708158R
VBMETA A705FNXXU5BTC2, 29691020R
Also after a minor update, please help!
NB: Phone was rooted but later flashed official ROM but left bootloader unlocked.
winterxda said:
Same here but with the following parameters:
boot reason boot : hash of data does not match digest in description . (2nd) (3)
Calculated hash of (boot) : A7681EDC3D. (VEMETA) : 98EEF63C0
SAMSUNG boot. A705FNXXU5BTF1, 31708158R
VBMETA A705FNXXU5BTC2, 29691020R
Also after a minor update, please help!
NB: Phone was rooted but later flashed official ROM but left bootloader unlocked.
Click to expand...
Click to collapse
I used the following solution which I found on a Samsung forum and it worked!
:good::good::good:
Hello Every One,
I had the same issue after trying to update my A70 phone based on a message which poped up from samsung asking me to update.
A friend of mine managed to resolve my issue without losing any data using that method:
1st : from the error msg --- > last line you will find the firmware version ex: A705FNXXU4ASK6
2nd: Goto https://www.sammobile.com/ --> Devices --> Choose your model --> Firmware --> Choose your country and download the firmware. (Download it and unzip it)
3rd: Download a software called Odin and follow the instruction ( MAKE SURE TO UNCHECK RE-PARTITION FIELD FROM OPTIONS TAB) IF YOU WANT TO KEEP YOU DATA
4th: In my case i have a new model so i uploaded the following 4 files ( BL , AP , CP , HOME_CSC) after i pluged the cable.
Dont forget to uncheck the Re-partition.
Click Start
winterxda said:
Same here but with the following parameters:
boot reason boot : hash of data does not match digest in description . (2nd) (3)
Calculated hash of (boot) : A7681EDC3D. (VEMETA) : 98EEF63C0
SAMSUNG boot. A705FNXXU5BTF1, 31708158R
VBMETA A705FNXXU5BTC2, 29691020R
Also after a minor update, please help!
NB: Phone was rooted but later flashed official ROM but left bootloader unlocked.
Click to expand...
Click to collapse
It locked my boot loader And I was previously fully rooted Now I’m stuck on the blue screen
My tablet starting you shut off for 30sec then come back on. Then it started to this **** completely off and reboot and they will get to the home screen and when I would soon as I would open an app it would reboot all over again and I did it over and over and over then I was trying to clear the chase and somehow it did this and I was previously fully rooted with supersu and the maskis one