Hello All,
About 1 Month ago, I updated the phone to Miui 13.0.4 and ever since, the 120Hz mode on the phone is not working. Has anyone else encountered this as well? has anyone found a workaround for this?
TIA and regards.
Rule #1, if a OS is fast, stable and fulfilling its mission, let it be! Updates, upgrades can and do break things.
Try a factory reset or a roll back if that fails.
Possible hardware failure.
Hello Blackhawk,
Thanks for the response. The phone has been working fine so far. just that the 120Hz mode won't come on and it is bothering me.
I took it to the service centre and they said since the software update broke it, a software update should fix it. but the 13.0.6 didn't but I guess it is because it was just a security patch. The bigger problem is that in the whole waiting ordeal, the device is past the warranty so if it is a hardware failure, I am screwed
Do you think there is a possibility that a hardware failure would cause the 120Hz mode to stop working but the screen will operate fine?
garrylpinto said:
Hello Blackhawk,
Thanks for the response. The phone has been working fine so far. just that the 120Hz mode won't come on and it is bothering me.
I took it to the service centre and they said since the software update broke it, a software update should fix it. but the 13.0.6 didn't but I guess it is because it was just a security patch. The bigger problem is that in the whole waiting ordeal, the device is past the warranty so if it is a hardware failure, I am screwed
Do you think there is a possibility that a hardware failure would cause the 120Hz mode to stop working but the screen will operate fine?
Click to expand...
Click to collapse
It's possible but if it started with an update, that's likely the cause or an incompatible app or service.
Try in safe mode (a 3rd party app maybe the cause), try a hard reboot.
My N10+ is still running on Pie, no OTA updates in over 2.5 years. Current load is 2 yo, still fast and stable. 2 years, still malware free...
Security is not an issue on Pie or higher unless you do something stupid in actual use as far as I have observed. Android 9 or higher are patched for the worst of the rootkits. Security patches don't save dumb bunnies... most install the malware themselves.
Thanks for the reply Blackhawk.
I will probably just wait for the following bug fix update and if that doesn't help, factory reset or install a custom from while praying it is not a hardware issue.
I tried the safe mode and that didn't show an improvement,
I was familiar with the laughable stability of MIUI and unsure what possessed me that I decided to update.
garrylpinto said:
I was familiar with the laughable stability of MIUI and unsure what possessed me that I decided to update.
Click to expand...
Click to collapse
It's not just MIUI, it's across the board. Even Pixels get busted by them
As do Samsung's
It is what it is I guess.
Thanks, Mate. It was nice talking to you.
garrylpinto said:
It is what it is I guess.
Thanks, Mate. It was nice talking to you.
Click to expand...
Click to collapse
Did you try going back to 60hz then activating 120hz?
Mods like clearing battery app cache / using setedit do lead to this after reboot - display is locked to 60hz but it fixes itself if you toggle it on/off
Rstment ^m^ said:
Did you try going back to 60hz then activating 120hz?
Mods like clearing battery app cache / using setedit do lead to this after reboot - display is locked to 60hz but it fixes itself if you toggle it on/off
Click to expand...
Click to collapse
You should try this! @garrylpinto
I don't think it's a hardware failure. Not just like that. That'd be too ridiculous.
I'd say try clearing data of Battery & performance, and checking with the app "SetEdit", if "user_refresh_rate" has a value of "120".
@blackhawk Also, Samsung has the most reliable System updates. You can fight me on this.
Rstment ^m^ said:
Did you try going back to 60hz then activating 120hz?
Mods like clearing battery app cache / using setedit do lead to this after reboot - display is locked to 60hz but it fixes itself if you toggle it on/off
Click to expand...
Click to collapse
I have tried toggling it and I was not using any sort of mod apps. Still, it happened though.
cyanGalaxy said:
You should try this! @garrylpinto
I don't think it's a hardware failure. Not just like that. That'd be too ridiculous.
I'd say try clearing data of Battery & performance, and checking with the app "SetEdit", if "user_refresh_rate" has a value of "120".
@blackhawk Also, Samsung has the most reliable System updates. You can fight me on this.
Click to expand...
Click to collapse
Hello Cyan,
I did try clearing the battery and performance data the user_refresh_rate is set to 120hz
cyanGalaxy said:
@blackhawk Also, Samsung has the most reliable System updates. You can fight me on this.
Click to expand...
Click to collapse
Lol, no need to fight. No updates, no problems.
In over 2 years of not updating the firmware malware infection rate has been zero.
No time lost to malware.
Samsung app updates have cost me over a dozen hours to fix in that time period. OTA firmware updates (especially if the bootloader) though can cause the most permanent damage on Samsungs.
garrylpinto said:
I have tried toggling it and I was not using any sort of mod apps. Still, it happened though.
Click to expand...
Click to collapse
Try in safe mode... keep playing with it.
Android's wuv attention
Sure, I'll give it a try.
One side note, Any idea how to change the customer region to India from Chine, I am trying to add my phone but it keeps showing 86 as the country code and won't let me change it and mi support is unhelpful is an understatement
garrylpinto said:
Sure, I'll give it a try.
One side note, Any idea how to change the customer region to India from Chine, I am trying to add my phone but it keeps showing 86 as the country code and won't let me change it and mi support is unhelpful is an understatement
Click to expand...
Click to collapse
Send pic of what you're talking about? Change it where?
Unlock bootloader procedure?
Rstment ^m^ said:
Send pic of what you're talking about? Change it where?
Unlock bootloader procedure?
Click to expand...
Click to collapse
Yeah, I was trying to unlock bootloader and then it got stuck at the checking security settings and someone suggested adding the phone number to your account manually but here is the problem:
I got to recovery phone
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
the country code portion is grayed out and i cant change it. been trying to get mi support to give an solution or change it for the past 4 days and everyone is just clueless.
ALso, My account is set to china for no reason and I cant change it
asked help with this and they are cluesless too
garrylpinto said:
ALso, My account is set to china for no reason and I cant change it
View attachment 5633971
asked help with this and they are cluesless too
Click to expand...
Click to collapse
Just create a new account then?
Via PC or phone browser create new mi acc and link it to your phone number.
Only when you do that connect it to the phone and go through the unlock period...
garrylpinto said:
Yeah, I was trying to unlock bootloader and then it got stuck at the checking security settings and someone suggested adding the phone number to your account manually but here is the problem:
I got to recovery phone
View attachment 5633965
View attachment 5633967
the country code portion is grayed out and i cant change it. been trying to get mi support to give an solution or change it for the past 4 days and everyone is just clueless.
Click to expand...
Click to collapse
Did you ever flash persist or something?
Rstment ^m^ said:
Just create a new account then?
Via PC or phone browser create new mi acc and link it to your phone number.
Only when you do that connect it to the phone and go through the unlock period...
Click to expand...
Click to collapse
Well, If there is no other option and Mi support is that useless, I might as well. Just that I like to keep all my accounts under the same ID.
Related
Out for a few markets, based on the build number alone I would say just a bump to the January security update.
Downloading now (233,4MB for customized DE)
Edit: Can confirm, it's security update 1.1.2018
Device feels a lot snapier (like scrolling etc.).
Didn't find anything new.
Can't see any difference except security updates from 1.1.2018.
BTW guys, do you use notifications "priorities" in drop-down notifications panel?
Since the start of using XZ1c I have put my monitoring app to low priority so the app's notification bar was very slim in the notifications panel.
I've done hard reset now when updating the phone and I can't see such feature any more. Did they move it somewhere or it's gone?
I'm not talking about configuring audio/vibrations - this feature it's there for apps created for Oreo - I'm talking about customizing notification bar size in drop-down notifications panel.
****, blank screen in Smart Lock still exists, even after latest update
SirRobin78 said:
****, blank screen in Smart Lock still exists, even after latest update
Click to expand...
Click to collapse
This is getting frustrating ?
Davka said:
Can't see any difference except security updates from 1.1.2018.
BTW guys, do you use notifications "priorities" in drop-down notifications panel?
Since the start of using XZ1c I have put my monitoring app to low priority so the app's notification bar was very slim in the notifications panel.
I've done hard reset now when updating the phone and I can't see such feature any more. Did they move it somewhere or it's gone?
I'm not talking about configuring audio/vibrations - this feature it's there for apps created for Oreo - I'm talking about customizing notification bar size in drop-down notifications panel.
Click to expand...
Click to collapse
Try to long press mini button in notification panel, al appear a new hidden menu, should be what you are looking for
Anyone who got this update using Linux and would like to give USB-Tethering a try? I'm stuck on an old version (47.1.A.5.51) and on this one, USB tethering download speeds are terrible (lots of RX packet errors, <1Mbps download speed). This was also an issue with some OnePlus phones which was fixed with a software update, so I'm hopeful that Sony will also fix it (although seeing how the smart lock blank screen bug is still there, my hopes aren't very high)
PeppeBove said:
Try to long press mini button in notification panel, al appear a new hidden menu, should be what you are looking for
Click to expand...
Click to collapse
This enables/disables UI Calibrator (addidtional submenu in System menu) but there are no options regarding notifications.
What I'm talking about is shown below. Earlier I was able to assign chosen apps (for example System Panel monitoring tool) to low priority notifications, in picture below these are Clipper+, Network Monitor and USB charging device. "Android System 2 apps are using battery" is a normal priority notification here:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is getting really depressing; those of us using USA firmware are being treated as second-class citizens. We're still on 47.1.A.2.234 with the August 2017 security patch.
Hm I didn't get an OTA as well and I'm on the North Columbian build (I think).
Don't want to reflash everything just because of a security patch.
pseudonym58 said:
This is getting really depressing; those of us using USA firmware are being treated as second-class citizens. We're still on 47.1.A.2.234 with the August 2017 security patch.
Click to expand...
Click to collapse
I went looking for a manual firmware update for the g8141 on the US version and don't see it. that sucks! I would suggest you consider flashing to CE1, not only will it enable your fingerprint scanner it's updated more frequently.
Dany XP said:
This is getting frustrating ?
Click to expand...
Click to collapse
There's a workaround for that. In Security, go to Trusted Agents and turn off smart lock, then reboot and turn it back on and the problem is solved.
N1ghtr08d said:
There's a workaround for that. In Security, go to Trusted Agents and turn off smart lock, then reboot and turn it back on and the problem is solved.
Click to expand...
Click to collapse
Dude, we already know that....
But after some time, the bug returns. That's the problem. It only works for a few days
Dany XP said:
Dude, we already know that....
But after some time, the bug returns. That's the problem. It only works for a few days
Click to expand...
Click to collapse
Just trying to help
Obievil said:
I went looking for a manual firmware update for the g8141 on the US version and don't see it. that sucks! I would suggest you consider flashing to CE1, not only will it enable your fingerprint scanner it's updated more frequently.
Click to expand...
Click to collapse
Is "CE1" an official stock firmware? I haven't done any firmware flashing since the days of Symbian; could you perhaps point me to a "Sony firmware flashing 101" tutorial that you would recommend? I want to make sure that I do it correctly. Thanks.
pseudonym58 said:
Is "CE1" an official stock firmware? I haven't done any firmware flashing since the days of Symbian; could you perhaps point me to a "Sony firmware flashing 101" tutorial that you would recommend? I want to make sure that I do it correctly. Thanks.
Click to expand...
Click to collapse
I wrote this answering someone else's question, but it might be helpful
pseudonym58 said:
Is "CE1" an official stock firmware? I haven't done any firmware flashing since the days of Symbian; could you perhaps point me to a "Sony firmware flashing 101" tutorial that you would recommend? I want to make sure that I do it correctly. Thanks.
Click to expand...
Click to collapse
I used this
https://forum.xda-developers.com/showpost.php?p=72958788&postcount=16
which looks nearly Identical to the post above.
Obievil said:
I went looking for a manual firmware update for the g8141 on the US version and don't see it. that sucks! I would suggest you consider flashing to CE1, not only will it enable your fingerprint scanner it's updated more frequently.
Click to expand...
Click to collapse
Customized DE and GEL seem to get updates even faster than CE1 from what I've seen. CE1 is still on 8.49 as of writing this, but DE and GEL are on 12.34. I'm currently running Customized UK and thinking of switching to one of those since I'm impatient.
nm
power useage
Any other feedback on the new firmware? Still not availabe here in the UK.
What's the battery life like?
I'm not sure which build it started in (I think it was there in DP2) but in DP3 and now also DP4 with my P2XL I don't have the option available to me in Gboard settings to synch learned words. I have the same version of Gboard installed on my OP3T running OOS 5.0.3 and the option is there. Is this consistent with other users or do I have a problem with my device? I don't know if it's psychosomatic or not but it seems like the suggestions surfaced by Gboard are of less value on my P2XL than they are on my OP3T and I'd like to attribute this to the fact that I can't synch learned words. TIA everyone.
megatomic said:
I'm not sure which build it started in (I think it was there in DP2) but in DP3 and now also DP4 with my P2XL I don't have the option available to me in Gboard settings to synch learned words. I have the same version of Gboard installed on my OP3T running OOS 5.0.3 and the option is there. Is this consistent with other users or do I have a problem with my device? I don't know if it's psychosomatic or not but it seems like the suggestions surfaced by Gboard are of less value on my P2XL than they are on my OP3T and I'd like to attribute this to the fact that I can't synch learned words. TIA everyone.
Click to expand...
Click to collapse
Yes its same for me...it was around DP2
I have it and running DP4.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my Pixel 2 XL using Tapatalk
EeZeEpEe said:
I have it and running DP4. View attachment 4549346
Sent from my Pixel 2 XL using Tapatalk
Click to expand...
Click to collapse
Damn, inconsistent bugs like this are the worst. So hard to isolate and fix.
What does it look like for you? Blank? Greyed out?
megatomic said:
Damn, inconsistent bugs like this are the worst. So hard to isolate and fix.
Click to expand...
Click to collapse
Sent from my Pixel 2 XL using Tapatalk
EeZeEpEe said:
What does it look like for you? Blank? Greyed out?
Sent from my Pixel 2 XL using Tapatalk
Click to expand...
Click to collapse
It's just not there. I have the settings page for the Dictionary but the part about syncing with my gmail account is completely missing.
So yesterday I opted out of the Android P beta program, installed the rollback OTA via the automated tool and set up my phone from scratch. The option to sync my Gboard dictionary with my Gmail account is still just not there. Maybe I should call Google support now that my phone is running Oreo again.
Just upgraded to Pie and issue is still prevalent. I'm on Gboard beta and I tried uninstalling and trying different apks to no avail. This is very frustrating as typing sucks as all my synced shortcuts are not there
Has anyone reported that to Google? I have seen this on a few AOSP Roms that this Option is completely missing. Most people wont even notice but it just sucks to not have the words you saved before.
D-m-x said:
Has anyone reported that to Google? I have seen this on a few AOSP Roms that this Option is completely missing. Most people wont even notice but it just sucks to not have the words you saved before.
Click to expand...
Click to collapse
I tried while still in the beta program and support wouldn't talk to me. I've gotten the official OTA and have since done a factory reset and the problem is still here for me, now I can hit up Pixel support again now that I am not running a beta OS.
megatomic said:
I tried while still in the beta program and support wouldn't talk to me. I've gotten the official OTA and have since done a factory reset and the problem is still here for me, now I can hit up Pixel support again now that I am not running a beta OS.
Click to expand...
Click to collapse
When I get the time I will try to update to P and report back. Maybe it's somehow Account related. They had that problem a few times with GPhotos I remember, that some things just wouldn't work for certain people.
D-m-x said:
When I get the time I will try to update to P and report back. Maybe it's somehow Account related. They had that problem a few times with GPhotos I remember, that some things just wouldn't work for certain people.
Click to expand...
Click to collapse
Yeah it's still there or maybe I just have some crazy bad luck but it sucks why this is the case.
D-m-x said:
When I get the time I will try to update to P and report back. Maybe it's somehow Account related. They had that problem a few times with GPhotos I remember, that some things just wouldn't work for certain people.
Click to expand...
Click to collapse
nexus_man12 said:
Yeah it's still there or maybe I just have some crazy bad luck but it sucks why this is the case.
Click to expand...
Click to collapse
I think I agree, this may be an account issue. I just set up my old OPO with LineageOS 15.1 and I have the same problem there. I wonder what Google can even do about this? I hope I don't have to make a new account to get this functionality back.
I don't think so. The biggest problem will be to bring it to their attention to actively keep them looking into this matter.
As a sidenote, I just Dirty flashed Pie on top of Oreo and still have the Option. I hope the get this fixed for you guys :/
Looks like this version of Gboard brings this option back as per this thread .
https://forum.xda-developers.com/android/help/google-gboard-issue-t3797307
This is indeed a lazy oversight on Googles Part. I remember the same thing happened with Google Photos. Remember the Option to have a floating Bubble on the Screen when you had taken a Photo with the GCamera? That was missing somehow after updating the App, going back to an older APK, activating the option and then update the App would make the option stick.
After official Pie was released, I still have the option just fine. [emoji53]
Sent from my Pixel 2 XL using Tapatalk
D-m-x said:
This is indeed a lazy oversight on Googles Part. I remember the same thing happened with Google Photos. Remember the Option to have a floating Bubble on the Screen when you had taken a Photo with the GCamera? That was missing somehow after updating the App, going back to an older APK, activating the option and then update the App would make the option stick.
Click to expand...
Click to collapse
That's just Google in a nutshell. :laugh: :laugh::laugh:
Hi Guys,
facing a really annoying issue with my battery usage! I have my phone since two days and from the beginning i reconized, that android system use most of the battery what is really strange! Att. some picture where you can see it. I have a SOT of a little bit of 1 h and have already used 43% of the battery. Something is using my power a lot. Some of you guys aware of this issue and has anybody a solution for me!? (MIUI 10.0.11.)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Reboot system.
O have the same problem and with a reboot the problem disappear.
Enviado do meu Mi MIX 3 através do Tapatalk
I already gave it a try, more than one reboot of the system, but still android system is at the top of the list! Overall my SOT is ridiculous.
No idea what could effect that, when i read that some user has a SOT of around 9h i'm really sad and sure that something is wrong.
SirPhilippF said:
I already gave it a try, more than one reboot of the system, but still android system is at the top of the list! Overall my SOT is ridiculous.
No idea what could effect that, when i read that some user has a SOT of around 9h i'm really sad and sure that something is wrong.
Click to expand...
Click to collapse
Android system is too high, should only be a few percent. Do a format or fastboot a fresh rom
Mackay53 said:
Android system is too high, should only be a few percent. Do a format or fastboot a fresh rom
Click to expand...
Click to collapse
So you mean a factory reset? How do i fastboot a fresh rom and which rom?
SirPhilippF said:
So you mean a factory reset? How do i fastboot a fresh rom and which rom?
Click to expand...
Click to collapse
Yes factory reset. Look in guides section for a guide
Mackay53 said:
Yes factory reset. Look in guides section for a guide
Click to expand...
Click to collapse
Could you please provide me a link
SirPhilippF said:
Could you please provide me a link
Click to expand...
Click to collapse
The time it takes me to find a relevant post and share it you could of searched and found it
SirPhilippF said:
I already gave it a try, more than one reboot of the system, but still android system is at the top of the list! Overall my SOT is ridiculous.
No idea what could effect that, when i read that some user has a SOT of around 9h i'm really sad and sure that something is wrong.
Click to expand...
Click to collapse
I'm not sure what app is causing the issue. I get 9 hours SOT on the EU weekly for 2+ months now. I'd probably get the same results using any version of miui. I use the same apps on all my phone's and always get great battery life.
954wrecker said:
I'm not sure what app is causing the issue. I get 9 hours SOT on the EU weekly for 2+ months now. I'd probably get the same results using any version of miui. I use the same apps on all my phone's and always get great battery life.
Click to expand...
Click to collapse
What versión of TWRP are you using?
I own a Mix 3, DO NOT factory reset. Simply go to Apps, Google Play Service, clear Cache & Data. This will solve the issue. We had a discussion on MIUI forum
I'm having this problem now too since the March update.
launcher
i killed tupac said:
I'm having this problem now too since the March update.
Click to expand...
Click to collapse
are you using any third party launcher? I used Nova and battery was terrible, when I switched back to stock launcher, extensive battery drain dissapear
georgito said:
are you using any third party launcher? I used Nova and battery was terrible, when I switched back to stock launcher, extensive battery drain dissapear
Click to expand...
Click to collapse
Yes I am actually, Nova launcher. Hm. It doesn't show as being a heavy user in the battery section though, did yours?
Not showing nova, but Android services using more then it should.. Had more then 30 %of android service usage and after switching back to miui launcher, have about 10 % max
In my case cleaning google services cache didnt solve the problem. I didnt do factory reset becouse i did it few days ago whe I bought used mix .
What I did was downloading last fw update package from phone settings and updated which means I flashed same rom I had on my mix.
Before CPU usage 100% all the time, now looks much better (see pictures)
There is a bug in the beta builds of MIUI if you are using one of those that causes ALL apps to get autostart permissions. This leads to severe battery drain. Simply going down the list and stripping most of the apps of the autostart permission fixes the problem. This has been reported as a bug to Xiaomi. I also submitted logs and bug report as I found the cause (I think) of the Verizon MMS issues.
PWn3R said:
There is a bug in the beta builds of MIUI if you are using one of those that causes ALL apps to get autostart permissions. This leads to severe battery drain. Simply going down the list and stripping most of the apps of the autostart permission fixes the problem. This has been reported as a bug to Xiaomi. I also submitted logs and bug report as I found the cause (I think) of the Verizon MMS issues.
Click to expand...
Click to collapse
You're right, beta builds for this device are a complete mess regarding battery consumption. Even with autostart option turned off I still have severe battery drain from "google play services".
PWn3R said:
There is a bug in the beta builds of MIUI if you are using one of those that causes ALL apps to get autostart permissions. This leads to severe battery drain. Simply going down the list and stripping most of the apps of the autostart permission fixes the problem. This has been reported as a bug to Xiaomi. I also submitted logs and bug report as I found the cause (I think) of the Verizon MMS issues.
Click to expand...
Click to collapse
Yeah I was about to report the same, just noticed and disabled most of them.
Isopropil said:
Yeah I was about to report the same, just noticed and disabled most of them.
Click to expand...
Click to collapse
IDK but I feel like mi-globe is decent with battery
Hello I got a Wing with Demo mode but I don't know where to start to remove the retail mode and flash official firmware on it. I need tips/help. If this isn't allowed here say so and thank you if you can help
Hello, I followed the one of V60 but... there is still the limitation of the battery at 50% and I don't how to remove it.
sev7en said:
Hello, I followed the one of V60 but... there is still the limitation of the battery at 50% and I don't how to remove it.
Click to expand...
Click to collapse
Link?
Figured it out but now I get this. Help?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hi! How were you able to take the 50 percent limitation off?
Using various guides I was able to get most of the retail mode stuff removed. I didn't take very good notes as I was going but could probably dig up what I used if anyone else needs help.
Aside from the 50% limitation, I also have:
1. After reboot, the list of Second Screen compatible apps resets to default
2. Fingerprint reader not usable
Anyone had any luck on either of those?
I also noticed that someone on ebay was selling demo units flashed with a tmobile rom. I spent a bit of time yesterday trying to flash stock retail roms but didn't have any luck..
sev7en said:
Hello, I followed the one of V60 but... there is still the limitation of the battery at 50% and I don't how to remove it.
Click to expand...
Click to collapse
Aleeexx588 said:
Hi! How were you able to take the 50 percent limitation off?
Click to expand...
Click to collapse
I've found a not so great workaround for the charging limitation. Seems like whatever process is limiting the battery charging to 50% is not executed on the factory reset screen. I've gone into this mode on my LG-Wing and have been able to charge the battery completely (just make sure you don't accidentally select yes+ok). I know this is terrible since the screen can't be turned off here and it's mostly just black text on a white background at max brightness, but I thought it'd be worth mentioning. I may try out a few other things later today to see if I can find something else around this charging limitation that could be of any help.
Thank you,Ial try that right now! And maby flashing it could help, but as much as I have tried I have been unable to.
Kazkyuu said:
I've found a not so great workaround for the charging limitation. Seems like whatever process is limiting the battery charging to 50% is not executed on the factory reset screen. I've gone into this mode on my LG-Wing and have been able to charge the battery completely (just make sure you don't accidentally select yes+ok). I know this is terrible since the screen can't be turned off here and it's mostly just black text on a white background at max brightness, but I thought it'd be worth mentioning. I may try out a few other things later today to see if I can find something else around this charging limitation that could be of any help.
Click to expand...
Click to collapse
Nice spot! It means definitively there is a process to watch on.
Hello, I too have an LG Wing Demo unit with only wifi. When I try to use
the LG Demo app with this pin code 103729, not correct pin. When I get to any point where the next password (L310MC570G) would fit, it also does not work either
My Wing is a Verizon demo.
Any help with any alternate passwords and pins would greatly be appreciated.
Thanks!
I saw something about in the v60 demo remove thread that flashing Verizon and then TMobile firmware got all the limitations off. Don't know the first step on doing this myself, I also cannot find any correct password to enable developer options but I'm waiting for any help from anyone.
devingubler1 said:
I saw something about in the v60 demo remove thread that flashing Verizon and then TMobile firmware got all the limitations off. Don't know the first step on doing this myself, I also cannot find any correct password to enable developer options but I'm waiting for any help from anyone.
Click to expand...
Click to collapse
Any chance you have a link to that? I haven't been able to find it after searching.
I apologize twice 1st don't have a link but 2nd I do say I'm sorry I said the wrong forum. Actually it was in the LG wing guides news and discussion thread titled success! 5g working on demo LG wing. I got a response from the fellow and we texted quite a bit about it but he said his laptop with all the info was on consignment until the 2nd (Thursday). So I thought we could work some sort of deal out but it hasn't happened yet. Apparently flashing the correct image file 1st and then a different image after worked for him. I'm still interested in doing this but not in a hurry like I was at first, I am having a hard time finding the Verizon firmware.
So I searched again for passwords and I found a reddit lgwing thread that helped me even though the wording isnt very helpful. will update below with any updates
the passwords are found here
https://www.reddit.com/r/LGWing/comments/o1tegn
this page says some less than clear wording so i prefer to say this:
When LG Demo app asks for code use the short one 103729.
If the ok button isnt available like for developer options, use the long password L310MC570G
then you enable adb debugging etc as shown in this thread
Retail mode removal
Please could someone kindly show me how to remove the retail mode on my new V60 ThinQ handset.
forum.xda-developers.com
so what happens after the above is it changes it from you cant do anything to you can do things like power off by putting in the longer password (L310MC570G). sadly the biggest snag still is that it wont go into download mode it just goes into the charging animation (powered off) so cant flash anything until this resolves. my other issue-free wing goes into dl mode no problem.
now it will adb reboot recovery so that might be something hopeful?
anyway if anyone knows what is wrong please help.
thanks.
So the few of us that bought this phone so far probably encountered some bugs here and there.
Let's share them and try to help each other, or even make Vivo aware of it.
1) Not Vivo exclusive, but the LTPO 3.0 display never drops to 1hz for me.
I've read it happens on S22 as well, OPPO, ONP phones.
Will update more in the future.
My refresh rate is set at 120hz but why does it still go down to as low as 10? Shouldn't it remain 120 no matter what since that's where I set it?
That's how LTPO works, in order to save battery as well.
You barely notice it though, i also set 120hz and i don't feel when it gets down.
set light mode and brightness more than 70% and screen will go 1hz at still.
problems - a lot of apps crashes/not start. diablo immortal not working at all
MrDiegoSPB said:
set light mode and brightness more than 70% and screen will go 1hz at still.
problems - a lot of apps crashes/not start. diablo immortal not working at all
Click to expand...
Click to collapse
From 10hz to 1hz probably won't make much difference anyway.
As for Diablo immortal, it works great here no crashes at all.
Have you tried clearing the cache out?
Derpling said:
That's how LTPO works, in order to save battery as well.
You barely notice it though, i also set 120hz and i don't feel when it gets down.
Click to expand...
Click to collapse
But isn't that what smart switch is for? Why have the option for smart switch, 60, 120 if it'll always switch anyway? I feel it's what's causing the stutters even when I'm just scrolling
you have global rom (funtouch) or CN Origin?
Diablo works fine when i got device (OriginOS) but after last update of firmware a lot of apps wont work now
enyaj said:
But isn't that what smart switch is for? Why have the option for smart switch, 60, 120 if it'll always switch anyway? I feel it's what's causing the stutters even when I'm just scrolling
Click to expand...
Click to collapse
You are right, the stutters are due to LPTO 3.0 and the way Vivo implanted it.
They might fix it, but we need to ask them.
Derpling said:
You are right, the stutters are due to LPTO 3.0 and the way Vivo implanted it.
They might fix it, but we need to ask them.
Click to expand...
Click to collapse
Yeah I hope they do release a fix. Not that it's a deal breaker but I'm just used to smooth scrolling with my Pixel phone
Well let them know then.
I'll open a ticket.
For me (CN Version) Samsung health is not working. Anyone else has the same Problem ?
Hi! i have and x80 pro cn version and i cant unistall the pdf reader that comes with the phone. I try to use the ones that comes with the google drive, or another and simply doesnt let me and its annoying.Anyone has the same problem? because the ones that come with the phone its in chinesse and i dont understand nothing.
Help! thanks!! i think that the solution is disable via ADB but i dont know how or which app is it.
Anyone knows a solution for google assistant? Everytime I start the phone new, i have to set Google as my Standard App for speech assistance. Its kind of annoying me
monex12 said:
Hi! i have and x80 pro cn version and i cant unistall the pdf reader that comes with the phone. I try to use the ones that comes with the google drive, or another and simply doesnt let me and its annoying.Anyone has the same problem? because the ones that come with the phone its in chinesse and i dont understand nothing.
Help! thanks!! i think that the solution is disable via ADB but i dont know how or which app is it.
Click to expand...
Click to collapse
Have you solved it yet?
kenajanek said:
Anyone knows a solution for google assistant? Everytime I start the phone new, i have to set Google as my Standard App for speech assistance. Its kind of annoying me
Click to expand...
Click to collapse
What version you have?
Derpling said:
What version you have?
Click to expand...
Click to collapse
Chinese snapdragon Version
Just curious, one question to the owners of funtouch os: do you have google lens integrated into your camera app enabling a barcode scan?
I do not find any possibility to do that with the global (origin os, Chinese) version. Apparently one needs an extra barcode scanning app...
ZarW said:
Just curious, one question to the owners of funtouch os: do you have google lens integrated into your camera app enabling a barcode scan?
I do not find any possibility to do that with the global (origin os, Chinese) version. Apparently one needs an extra barcode scanning app...
Click to expand...
Click to collapse
You can scan barcodes in Jovi Vision.
Camera -> More -> Jovi Vision.
But I think only chinese barcodes are supported.
It didn't work for any euro barcode I tried.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I've noticed that after using the vivo 50W wireless charger to charge the phone to 100% then checking battery health in devcheck or any other app for that matter it will show "Overvoltage" in battery health. Sometimes it happens randomly during the day. It will return back to "Good" after rebooting the phone but then after a while it will show Overvoltage again. Is this because the phone has dual-cell battery? A software bug? Because I'm not having any battery issues whatsoever like overheating and battery backup has been great.
Whilst using night mode sometimes, the phone takes too long to process. Then ends up turning the picture into a fully green picture. So none of the original image is saved. Only green screen. Any ideas on how to fix this?