Develop Bugs

BlackView BV9600 Pro + LineageOS?

Hi! Could you please explain if this ROM will be compatible with my smartphone? I'm not sure, I don't found it on the list on LineageOS website.

Well, someone need to compile it for our bv9600 - i also would appreciate it, but i don't have thoose skills...

Also, lenovo vibe c2

i am not even not able to root my device (blackview bv9600 pro) i don't think that you will be able to have any lineage rom also...
have anyone success to root this device?

giannhs_n said:
i am not even not able to root my device (blackview bv9600 pro) i don't think that you will be able to have any lineage rom also...
have anyone success to root this device?
Click to expand...
Click to collapse
jup, runs root - magisk

AMDFenics said:
jup, runs root - magisk
Click to expand...
Click to collapse
can you explain how did you get root? or give me a guide, all the internet guides i tried failed!
thanks

giannhs_n said:
can you explain how did you get root? or give me a guide, all the internet guides i tried failed!
thanks
Click to expand...
Click to collapse
simply follow this guide -> LINK
- allow OEM unlock in the dev-settings (hit 5 times build number to see)
- allow usb debugging
- reboot to fastboot
- send "fastboot devices" command
- send "fastboot oem unlock" -> acknowledge
- send "fastboot flashing unlock" -> acknowledge
- flash the twrp image "fastboot flash recovery name_of_the_image.img"
- reboot into twrp by power of the device
- after that press vol+ up and power button (if i remember correct.. ) to get into twrp
- now u need a sd-card (micro) put no verity opt encrypt on it and magisk
- Backup all partitions u find.
- format data partition to get the size
- install magisk
- install no verity opt...
reboot
BV9600 should be rooted. Took me serveral times to get it working, because u need directly after "Flashing unlock command" to get the twrp stuff done.
Credits
The TWRP.img comes from www.unofficialtwrp.com
The encryption disabler comes from @Zackptg5 all credits to him. THANKS -> his site LINK
Enjoy

AMDFenics said:
simply follow this guide -> LINK
- allow OEM unlock in the dev-settings (hit 5 times build number to see)
- allow usb debugging
- reboot to fastboot
- send "fastboot devices" command
- send "fastboot oem unlock" -> acknowledge
- send "fastboot flashing unlock" -> acknowledge
- flash the twrp image "fastboot flash recovery name_of_the_image.img"
- reboot into twrp by power of the device
- after that press vol+ up and power button (if i remember correct.. ) to get into twrp
- now u need a sd-card (micro) put no verity opt encrypt on it and magisk
- Backup all partitions u find.
- format data partition to get the size
- install magisk
- install no verity opt...
reboot
BV9600 should be rooted. Took me serveral times to get it working, because u need directly after "Flashing unlock command" to get the twrp stuff done.
Credits
The TWRP.img comes from www.unofficialtwrp.com
The encryption disabler comes from @Zackptg5 all credits to him. THANKS -> his site LINK
Enjoy
Click to expand...
Click to collapse
thanks for the detailed information,
can you also tell me your frimewire version also because i am not available to boot on recovery!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

giannhs_n said:
thanks for the detailed information,
can you also tell me your frimewire version also because i am not available to boot on recovery!
View attachment 4705498
Click to expand...
Click to collapse
exact same version.
---------- Post added at 10:29 PM ---------- Previous post was at 10:27 PM ----------
First u need to go to fastboot mode, to unlock "OEM UNLOCK"
This is easy via adb
-> reboot fastboot
Did u install the correct driver? (ADB driver) is ur device listed?

i tried repacking it myself but with no luck so far, also tried various treble GSI, all booting on my BV9600Pro and basically working but mobile data and phone are broken so that's not an option for now

I don’t understand why unblock the bootloader at all if everything is installed on the MTK platform using the SP Flash Tool !?
Why these dances with adb and fastboot? if a everything is done much easier ...
You do not install the factory software using adb ? not ?? so why can't TWRP be installed and installed using the SP Flash Tool!? Why complicate things?

Root with sp Flash tool
Hi please Anyone could explain this procedure with Sp Flash Tool and post it?

serg2327 said:
I don’t understand why unblock the bootloader at all if everything is installed on the MTK platform using the SP Flash Tool !?
Why these dances with adb and fastboot? if a everything is done much easier ...
You do not install the factory software using adb ? not ?? so why can't TWRP be installed and installed using the SP Flash Tool!? Why complicate things?
Click to expand...
Click to collapse
Because the vendor (Blackview) locks the bootloader (like any other brand does) and does not allow installing any other recovery without it.!?

AMDFenics said:
Because the vendor (Blackview) locks the bootloader (like any other brand does) and does not allow installing any other recovery without it.!?
Click to expand...
Click to collapse
Is this a statement or a question? Sorry, I do not know English and I use a translator ..
II repeat once again, in order to install TWRP you do not need to unlock the bootloader!
it installs without problems using the SP Flash Tool
and this is not an assumption but a statement!
My first copy of the smartphone received TWRP. It was on my copy that all the first tests of TWRP and ROOT were conducted.

serg2327 said:
Is this a statement or a question? Sorry, I do not know English and I use a translator ..
II repeat once again, in order to install TWRP you do not need to unlock the bootloader!
it installs without problems using the SP Flash Tool
and this is not an assumption but a statement!
My first copy of the smartphone received TWRP. It was on my copy that all the first tests of TWRP and ROOT were conducted.
Click to expand...
Click to collapse
I'm glad to hear that it works that way to you. But that doesn't worked for me. So i wrote the way i took, to root. Let the others choose, wich way works for them. :fingers-crossed::good:

I am using another MTK device and SP FlashTool is great it lets you recover from any software brick. So I will advice people to use this method.
I am planning on buying bv9600 pro and having twrp ported and root is a good start to custom roms.
The touch driver issue on twrp should be easily solved with the good kernel module for the twrp. And official twrp support would be nice.
Subscribed to the thread will see where it goes.

hi guys, can you share a clean system twrp backup of bv9600? because my USB is damaged and i can not use sp flash tool to clean restore. thanks!

Hi, i try to root my bv9600 pro, but all i end up is on reboot the system restores to factory no TWRP or anything on it. I connected it to MTKdroidtools and it complains about a file /system/recovery-from-boot.p which restores recovery and obviously after it the system too.
Thanks for any help
edit: LOL nevermind, working fine now, don't know what was going wrong, in a last try just downloaded the latest stable magisk again. Thanks AMDFenics for the howto
Just one thing, can i get rid of this 5 sec. warning that the mobile is unlocked?

dark-wulf said:
Hi, i try to root my bv9600 pro, but all i end up is on reboot the system restores to factory no TWRP or anything on it. I connected it to MTKdroidtools and it complains about a file /system/recovery-from-boot.p which restores recovery and obviously after it the system too.
Thanks for any help
edit: LOL nevermind, working fine now, don't know what was going wrong, in a last try just downloaded the latest stable magisk again. Thanks AMDFenics for the howto
Just one thing, can i get rid of this 5 sec. warning that the mobile is unlocked?
Click to expand...
Click to collapse
Maybe there is a way, but i don't know him. It is a common way for many manufacturer, to say, "here u did something you are not supposed too"

https://www.mediafire.com/file/0j0bx6cb0cb58f5/BV9600Pro_30042019_full.zip/file
Latest Firmware (04.2019) Clean SP Flash tool Backup

[GUIDE] How to remove and clear GOOGLE ACC and Mi ACC / MiCloud for MERLIN (Redmi Note 9 / Redmi 10X 4G)

WARNINGS:​
NEVER try to flash in "format all" mode ! Otherwise, you will LOSE all secure and identifying infos for your device. Like IMEI.
USE AT YOUR OWN RISK. I AM NOT RESPONSIBLE FOR YOUR ACTIONS.​
Works with:
- Xiaomi Redmi Note 9
- Xiaomi Redmi 10X 4G
Downloads:
SP Flash Tool (Windows): https://spflashtools.com/category/windows
SP Flash Tool (Linux): https://spflashtools.com/category/linux
Scatter file: https://forum.xda-developers.com/t/...omi-redmi-note-9-xiaomi-redmi-10x-4g.4223097/
Download-Agent (DA) file: https://forum.xda-developers.com/t/...omi-redmi-note-9-xiaomi-redmi-10x-4g.4209765/
Method #1:
This method requires the download of the original stock rom firmware.
This method will ERASE userdata.
This method will LOCK bootloader again.
1. Download and extract the ORIGINAL STOCK ROM FIRMWARE.
2. Download and install SP Flash Tool.
3. Run SP Flash Tool and configure it properly, following this guide: https://forum.xda-developers.com/t/...for-merlin-redmi-10x-4g-redmi-note-9.4229939/
4. Select "Download" tab.
5. Click "Choose" button for finding the Scatter-loading. Go to the folder images, inside the extracted rom and select the file: MT6768_Android_Scatter.txt.
6. Open the download mode selection list and change from "Download Only" to "Firmware upgrade".
7. Press "Start".
8. Plug powered off phone to usb.
9. Wait until it finish.
Done.
Method #2:
1. Download and install SP Flash Tool.
2. Run SP Flash Tool and configure it properly, following this guide: https://forum.xda-developers.com/t/...for-merlin-redmi-note-9-redmi-10x-4g.4229937/
3. Select "Format" tab.
4. Select "Manual Format Flash".
5. Type the ADDRESS of the partition to "Begin Address".
5. Type the LENGTH of the partition to "Format Length".
6. Press "Start".
7. Plug powered off phone to usb.
8. Wait until it finish.
Done.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Partitions you need to format:
Partition: persist​Size: 49.152 KiB (48 MiB)​Block: /dev/block/mmcblk0p13​Start address: 0x104a2000​Length: 0x3000000​
Partition: frp​Size: 1.024 KiB (1 MiB)​Block: /dev/block/mmcblk0p5​Start address: 0x5508000​Length: 0x100000​
Do you need help with your MERLIN device ?
Read this FAQ: https://forum.xda-developers.com/t/...for-merlin-redmi-note-9-redmi-10x-4g.4225163/

Hello. I understand but I am noob and want to make sure I dont commit mistakes. I will use method 2. have miui 12.0.6, global phone Redmi Note 9 -Checked-. I downloaded scatter file "MERLIN--MT6768_Android_scatter--full--VD171.txt", download agent "DA_VD171--3.3001.2020-07-02020-07-14.bin", and put them on sp flash tool. did UNCHECK "LIB DA match" and UNCHECK "Storage Lite Cycle". Can I proceed to format persist and frp partitions following your steps or I need to flash something before? Am I missing something? It seems easy and a very unknown method. If I do it all carefully, are they serious risks of bricking phone? is it prudent to backup using readback first? Why do most "technicians" use server methods to unlock xiaomi account? Really thanks, I was looking for a solution months ago. My device is not blocked but I lost my sim -not at my name- and didnt have a email associated so this seems to be my unique option. Thanks, thanks, thanks!!

l0ggerbrk said:
Hello. I understand but I am noob and want to make sure I dont commit mistakes. I will use method 2. have miui 12.0.6, global phone Redmi Note 9 -Checked-. I downloaded scatter file "MERLIN--MT6768_Android_scatter--full--VD171.txt", download agent "DA_VD171--3.3001.2020-07-02020-07-14.bin", and put them on sp flash tool. did UNCHECK "LIB DA match" and UNCHECK "Storage Lite Cycle". Can I proceed to format persist and frp partitions following your steps or I need to flash something before? Am I missing something? It seems easy and a very unknown method. If I do it all carefully, are they serious risks of bricking phone? is it prudent to backup using readback first? Why do most "technicians" use server methods to unlock xiaomi account? Really thanks, I was looking for a solution months ago. My device is not blocked but I lost my sim -not at my name- and didnt have a email associated so this seems to be my unique option. Thanks, thanks, thanks!!
Click to expand...
Click to collapse
If you are unsure, just backup them using the readback first.
But, you do NOT need to flash anything before of the format.

Do I need to unlock bootloader in order to unlock mi account using method 2?
VD171 said:
If you are unsure, just backup them using the readback first.
But, you do NOT need to flash anything before of the format.
Click to expand...
Click to collapse

l0ggerbrk said:
Do I need to unlock bootloader in order to unlock mi account using method 2?
Click to expand...
Click to collapse
No

l0ggerbrk said:
Do I need to unlock bootloader in order to unlock mi account using method 2?
Click to expand...
Click to collapse
No, you do not need unlocked bootloader for that

VD171 said:
No, you do not need unlocked bootloader for that
Click to expand...
Click to collapse
hi
well sounds dumb..but my device is locked and you wrote device has to be shut off..but i cant shut it it off..if i hold power..it just restarts..if i hold power and vol down it also just turns off for a second starts again....any solution?

dante2903 said:
hi
well sounds dumb..but my device is locked and you wrote device has to be shut off..but i cant shut it it off..if i hold power..it just restarts..if i hold power and vol down it also just turns off for a second starts again....any solution?
Click to expand...
Click to collapse
Your device will be detected between one reboot and the next reboot, even if the device got in bootloop.

does this work on other xiaomi phones ?

newrandomaccountbruh said:
does this work on other xiaomi phones ?
Click to expand...
Click to collapse
Probably, yes.

VD171 said:
Probably, yes.
Click to expand...
Click to collapse
i need to unlock my device redmi note 10 pro max as i lost my sim card and get mutiple time rejected when trying to reset it via mi cloud support page. it tells to retry from internet and device u use often
do i need special scatter ?
thanks

muxans said:
i need to unlock my device redmi note 10 pro max as i lost my sim card and get mutiple time rejected when trying to reset it via mi cloud support page. it tells to retry from internet and device u use often
do i need special scatter ?
thanks
Click to expand...
Click to collapse
I have no ideia about how to do that, my friend.
This thread is specific for redmi note 9 (MERLIN).

@VD171
Hey man, sorry for bothering you, can I use method 1 for xiaomi mi 8 / mi 8 pro with snapdragon cpu ?
I have a problem with locked Mi account, don't have a sim card associated with the account, and my bootloader is unfortunately locked ..
Please, can you help me ? I'm desperate.

KTBFFH1905 said:
@VD171
Hey man, sorry for bothering you, can I use method 1 for xiaomi mi 8 / mi 8 pro with snapdragon cpu ?
I have a problem with locked Mi account, don't have a sim card associated with the account, and my bootloader is unfortunately locked ..
Please, can you help me ? I'm desperate.
Click to expand...
Click to collapse
I have no ideia about how to do that on snapdragon.

will it work on redmi 9 M2004J19AG mediatek MT6769T MIUI Global 12.0.1 ? I cant find Scatter file for MT6769T

darko12 said:
will it work on redmi 9 M2004J19AG mediatek MT6769T MIUI Global 12.0.1 ? I cant find Scatter file for MT6769T
Click to expand...
Click to collapse
I'm not sure.

Can i use Scatter file for MT67698 or is there other method to remove mi account, I bought used phone with logged mi account , phone isnt blocked but I cant format

darko12 said:
Can i use Scatter file for MT67698 or is there other method to remove mi account, I bought used phone with logged mi account , phone isnt blocked but I cant format
Click to expand...
Click to collapse
I'm not sure.

The frp is gone but the mi account when I am connected to the network is locking again....

sakis0547 said:
The frp is gone but the mi account when I am connected to the network is locking again....
Click to expand...
Click to collapse
Frp only is not enough.
You may try removing micloud totally.

How To Guide TMO 9PRO LAST OPTION HARDBRICKED FIX & BACK TO TMO STOCK FIX

Frist off I'm not Responsible for anything that happens to your phone!!!
DO NOT FLASH UNLESS YOU TRIED EVERYTHING ELSE FIRST INDIA MSM TOOL TO FIX YOUR HARD BRICKED T-MOBILE 9PR0!!!!
DO THIS AT YOUR OWEN RISK!!!
DISCLAIMER: THIS WILL PERMANENTLY MODIFY YOUR DEVICE TARGET ID WITH ALL MSMTOOL'S
FIRST HOW TO FIX HARD BRICKED TMO 9PRO
SO I HARD BRICKED MY TMO 9PRO JUST STAYED ON A BLACK SCREEN COULD NOT BOOT RECOVERY NOR FASTBOOT
T-MOBILE MSM TOOL WOULD NOT WORK AT ALL
WITH SOME HELP FROM OTHER MEMBERS I FINALLY GOT IT BACK UP AND GOING
WITH THESE STEPS
DOWNLOAD THE LATEST
INDIA MSM TOOL
UNZIP AND OPEN
SET TARGET TO IN
ONLY CHECK AUTO REBOOT AND LITE FIREHOSE
CLICK START
PLUG DEVICE INTO THE COMPUTER
LET IT RUN
ONCE BOOTED
CONNECT TO WIFI DUE TO YOU WILL HAVE NO SIGNAL DUE TO NO MODEM
SKIP THROW SETUP
ENABLE DEVELOPER OPTIONS THEN OEM UNLOCK
REBOOT TO FASTBOOT
OPEN TERMINAL
RUN: FASTBOOT OEM UNLOCK
HIGHLIGHT YES ON DEVICE SCREEN WITH THE VOLUME DOWN KEY
PHONE WILL REBOOT
ONCE REBOOTED
BOOT BACK TO FASTBOOT
AND FLASH TMO MODEM
I RECOMMEND USING THIS
TMO MODEM
HAS MODEM AND FLASH SCRIPT
JUST EXTRACT AND RUN SCRIPT
REBOOT AN SIGNAL IS BACK
PLEASE KEEP IN MIND YOU CAN NOT
FLASH STOCK WITH REGULAR T-MOBILE MSM TOOL EVERY AGAIN
NOR FLASH EU CONVERSION MSMTOOL
It's will the Target IN error Everytime
DUE TO THIS METHOD PERMANENTLY CHANGES YOUR DEVICES TARGET ID TO (IN) WITCH IS INDIA
BUT YOU CAN FLASH EITHER OR VIA LOCAL UPGRADE OR WITH MY FASTBOOT ROM WITH UNLOCK BOOTLOADER
ONEPLUS WILL NOT HELP YOU AFTER THIS PROCESS (I TRIED LOL)
HOW TO FLASH T-MOBILE STOCK FIRMWARE WITH MODIFIED MSMTOOL FIX
FLASH THIS AT YOUR OWEN RISK!!!
DISCLAIMER: THIS IS A MODIFIED OPS FILE I MADE FOR T-MOBILE MSM TOOL AND TMOBILE 9PRO ONLY.
I HAVE TESTED THIS WITH MY OWN DEVICE AND A TESTER Libra420T SUPER BIG THANKS TO HIM
THIS WILL ALLOW YOU TO REVERT BACK TO T-MOBILE FIRMWARE IF EVERY NEED OR WANTED
I MODIFIED THE OPS FILE TO HAVE MSM TOOL BYPASS THE WRONG TARGET ISSUE AKA PARAM
THIS MSM TOOL WILL ALLOW YOU TO RETURN BACK TO TMOBILE FIRMWARE ALSO RECEIVE OTA
MODIFIED MSM TOOL OOS11.2.6.6
ALL NEED FILES ARE IN LINK
THIS WILL WIPE ALL DATA!!!
AN RELOCK BOOTLOADER(MEANING TO OEM UNLOCK HAVE A ONEPLUS TOKEN)
DISABLE DIIVER SIGNATURE ENFORCEMENT
ADVANCED BOOT , TROUBLE SHOOT , START UP STEETING , REBOOT, TYPE 7, REBOOT INTO WINDOWS
INSTALL L2+DRIVERS
EXTRAT ZIP
OPEN L2 , OPEN 64, CLICK ON (QCSER64), VIEW CERTIFICATE
INSTALL, SELECT CURRENT USER, SELECT AUTOMATICALLY, THE FINISH
MUST HAVE QAULCOMM DRIVER'S INSTALLED AS
(QUALCOMM HS-USB QDLoader 9008)
FOR EDL TO WORK!!
CLICK LINK DOWNLOAD MSM TOOL
UNZIP
CLICK ON MSM TOOL
CLICK START
(IF IN OOS/ROM)
REBOOT TO EDL
( WITH COMMAND ADB REBOOT EDL IN TERMINAL)
(IF BRICKED!)
HOLD BOTH VOLUME UP AND DOWN
CONNECT TO PC
WHEN YOU SEE CONNECTED
LET IT RUN DEVICE WILL REBOOT ONCE DONE!!!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Wanna Buy me

Anytime brother
This is super dope and super important!!!

i have this error (firehose getufsinfo failed ) all the time and already tried all the edl packages here any help please

gebrel said:
i have this error (firehose getufsinfo failed ) all the time and already tried all the edl packages here any help please
Click to expand...
Click to collapse
Please screenshot and provide more information about the actions you have taken.

razercortex said:
Please screenshot and provide more information about the actions you have taken.
Click to expand...
Click to collapse
I did use the msm tools from xda forums and that what I get all the time this error my phone is oneplus9pro and it is the eu model 128 g 8 g ram

gebrel said:
I did use the msm tools from xda forums and that what I get all the time this error my phone is oneplus9pro and it is the eu model 128 g 8 g ram
Click to expand...
Click to collapse
This is for T-Mobile's LE2127 OnePlus 9 pro ......
You should be using EU MSM tool

Libra420T said:
This is for T-Mobile's LE2127 OnePlus 9 pro ......
You should be using EU MSM tool
Click to expand...
Click to collapse
i did used it but no use same error my friend also i used the india and the global same thing :S is my emc broken lol

I hope not.... Get log while running EU MSM

gebrel said:
i did used it but no use same error my friend also i used the india and the global same thing :S is my emc broken lol
Click to expand...
Click to collapse
You're good, I worked with craznazn to leak the EU tool.

gebrel said:
i did used it but no use same error my friend also i used the india and the global same thing :S is my emc broken lol
Click to expand...
Click to collapse
Can you take a picture of your fastboot if you can access it?

razercortex said:
Can you take a picture of your fastboot if you can access it?
Click to expand...
Click to collapse
The problem that it is a hard brick and I cant even see anything on the screen

gebrel said:
The problem that it is a hard brick and I cant even see anything on the screen
Click to expand...
Click to collapse
no fastboot, bootloader, recovery, or edl?

Ok, let's start simple.
I'm assuming your computer recognizes your phone correctly as QDloader 9008.
First, try to uninstall all Qualcomm drivers. Then, reboot your PC and use Windows Update to install the optional driver updates. If you're using Windows Update drivers right now, switch to using the drivers on craznazn's collection of MSM tools.

Problem solved everyone, the phone's broken, so there's little point of fixing it, the file system was corrupted.

razercortex said:
Problem solved everyone, the phone's broken, so there's little point of fixing it, the file system was corrupted.
Click to expand...
Click to collapse
Wow that's unfortunate
How does something like that happen?

Well it could be that dropping the phone damaged some of the pin connections or the UFS section on the chip, though I'm no expert.

damn.....

@Libra420T @FizzyAps where have you guys been?

TheKnux said:
@Libra420T @FizzyAps where have you guys been?
Click to expand...
Click to collapse
Unfortunately my father passed, and I was out of the game for a bit ... As for fizzy, M.I.A

Hey everyone
A friend if mine had his 9pro die mid conversion and is bricked after multiple trail and errors we were able to get the drivers and the MSMtool recognizing the phone but we are stuck at two points:
1- Using all MSMtools we can get our hands on from EU to TMO to Global to India (Multiple versions) and all will end up with [( Param Preload ) device not match]
2- Using your edited TMO MSMtool from this link https://drive.google.com/drive/folders/1CMLRWUkC1sj4z61Q_9_UvfDHwzRNOATb will give us another error which is unsupported target TMO
Its an LE2721 to confirm
At this point I guess the driver/phone situation is OK and only the correct MSMtool is needed right?

How To Guide Nokia G20 boot.img flashing!

Please be aware that this could damage your phone & I'm not responsible for this. So only do this if you really feel comfortable with it & you know about the risks!
This file is only for Nokia G20 TA-1365 and should not be used for any other device.
Download this file to manually Flash partition or partitions using fastboot Command.
For more detailed tutotial on how to flash this file you can read this tutorial here by senior member fipsib at XDA!
Let's say you want to flash boot.img partition so in CMD you will enter.
"fastboot flash boot boot.img" without quotes.
I have extracted OTA stock rom for my Nokia G20 and have all the files in the screenshot below. If you want all the files shown in the screenshot below I have uploaded them to Google Drive for faster and safer downloads rather than using any other file sharing service.
I have compressed all the files in a zip format and here is the Google Drive link for all the files shown below. Please request the access to the file so that I can grant access to you. I have done this to prevent Google setting an limit to download and avoid any unnecessary downloads.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Do you have to unlock bootloader to flash boot.img if you have to can you tell how????

Don't know said:
Do you have to unlock bootloader to flash boot.img if you have to can you tell how????
Click to expand...
Click to collapse
Thankyou buddy but actually this post is a guide.

mvikrant97 said:
Please be aware that this could damage your phone & I'm not responsible for this. So only do this if you really feel comfortable with it & you know about the risks!
This file is only for Nokia G20 TA-1365 and should not be used for any other device.
Download this file to manually Flash partition or partitions using fastboot Command.
For more detailed tutotial on how to flash this file you can read this tutorial here by senior member fipsib at XDA!
Let's say you want to flash boot.img partition so in CMD you will enter.
"fastboot flash boot boot.img" without quotes.
I have extracted OTA stock rom for my Nokia G20 and have all the files in the screenshot below. If you want all the files shown in the screenshot below I have uploaded them to Google Drive for faster and safer downloads rather than using any other file sharing service.
I have compressed all the files in a zip format and here is the Google Drive link for all the files shown below. Please request the access to the file so that I can grant access to you. I have done this to prevent Google setting an limit to download and avoid any unnecessary downloads.
View attachment 5450449
Click to expand...
Click to collapse
Please share download link.I need to unbrick my Nokia G20 that was bricked.I have no firmware

Download this OTA ROM and flash using Apply update from SD CARD in recovery menu.
Use external SD card.
I don't know whether this will work.
ROM link

Don't know said:
Do you have to unlock bootloader to flash boot.img if you have to can you tell how????
Click to expand...
Click to collapse
Yes need to unlock bootloader.

mvikrant97 said:
Download this OTA ROM and flash using Apply update from SD CARD in recovery menu.
Use external SD card.
I don't know whether this will work.
ROM link
Click to expand...
Click to collapse
Hi thanks for the link. But my phone is bricked, can't enter recovery or fastboot mode. So the only solution here is a read firmware or scatter file.

mvikrant97 said:
Please be aware that this could damage your phone & I'm not responsible for this. So only do this if you really feel comfortable with it & you know about the risks!
This file is only for Nokia G20 TA-1365 and should not be used for any other device.
Download this file to manually Flash partition or partitions using fastboot Command.
For more detailed tutotial on how to flash this file you can read this tutorial here by senior member fipsib at XDA!
Let's say you want to flash boot.img partition so in CMD you will enter.
"fastboot flash boot boot.img" without quotes.
I have extracted OTA stock rom for my Nokia G20 and have all the files in the screenshot below. If you want all the files shown in the screenshot below I have uploaded them to Google Drive for faster and safer downloads rather than using any other file sharing service.
I have compressed all the files in a zip format and here is the Google Drive link for all the files shown below. Please request the access to the file so that I can grant access to you. I have done this to prevent Google setting an limit to download and avoid any unnecessary downloads.
View attachment 5450449
Click to expand...
Click to collapse
Kindly grant access to [email protected] need to unbrick my device

I would like to ask how do I extract the boot.img file from the phone? I can access the internals through the adb shell. I would love to learn the strategies used to extract the firmware from android devices that do not make them available. Thanks!!

karangejo said:
I would like to ask how do I extract the boot.img file from the phone? I can access the internals through the adb shell. I would love to learn the strategies used to extract the firmware from android devices that do not make them available. Thanks!!
Click to expand...
Click to collapse
Simply... You can't without root.
To get root (permanent root) you must unlock your bootloader........
Please, read this post to understand what i'm talking about https://forum.xda-developers.com/t/nokia-g21-development.4424031/
I think that today there's no way to unlock G10/G20/G21 bootloader. Then, no root or custom recovery can be build.
Maybe, @mvikrant97 can share with us some info (PM).

I unlocked my g20 TA-1343 by taking a hundred tiny screws out , shorting the test point, and using MTK Client 1.6
hyperlink of the link i pastedhttps://github.com/bkerler/mtkclient
I only took it apart because the other option was send it back to HMD
But I don't know how to flash the bin files with magisk or whatever as they're not valid images. but the thing is basically root if i felt like learning.

jdberkzk said:
I unlocked my g20 TA-1343 by taking a hundred tiny screws out , shorting the test point, and using MTK Client 1.6
hyperlink of the link i pastedhttps://github.com/bkerler/mtkclient
I only took it apart because the other option was send it back to HMD
But I don't know how to flash the bin files with magisk or whatever as they're not valid images. but the thing is basically root if i felt like learning.
Click to expand...
Click to collapse
Do you mean the bootloader unlock?

mvikrant97 said:
Do you mean the bootloader unlock?
Click to expand...
Click to collapse
Yes I unlocked the bootloader with mtk client but i have the G20 ta-1343 and. I didn't have a stom rom for it.. and I bricked it trying to root it and corrupt the gpt it looks like, now I cant get it to load in mtk client anymore. I haven't errased the rest of the phone but it is in a/b format so i dont know if i should flash it? I was stuck in boot loop

jdberkzk said:
Yes I unlocked the bootloader with mtk client but i have the G20 ta-1343 and. I didn't have a stom rom for it.. and I bricked it trying to root it and corrupt the gpt it looks like, now I cant get it to load in mtk client anymore. I haven't errased the rest of the phone but it is in a/b format so i dont know if i should flash it? I was stuck in boot loop
Click to expand...
Click to collapse
mvikrant97 said:
Do you mean the bootloader unlock?
Click to expand...
Click to collapse
I got bootloader unlocked but when i flashed magisk i got stuck on the android one screen and then now it's back to the no OS boot loop and
Error on reading data: MMC error (0xc0040030)
in mtkclient. i cant get to fastboot anymore.

I du
mvikrant97 said:
Do you mean the bootloader unlock
Click to expand...
Click to collapse
I dumped everything from my phone to my computer except userdata super otp and flashinfo i think.
the bins would flash the same as images except I can't get them to flash. should I try another firmware or?

How To Guide Flashing ColorOs 12 on Oppo reno6 5G CPH2251

Hey Guys,
Many users downgraded their ColorOs12 to ColorOs11.3 on oppo reno6 5G device due to many bugs on it, they want to install ColorOs12 but they are not getting OTA update, they are wandering how can they install ColorOs 12 back on their phone, So, here I have come up with a method to directly flash ColorOS12.
Note: Data will(or might) be erased in this method so please take backup of you data on phone.
This has been tested on Indian version, I am not sure if it will work for other countries.
I strongly recommend to take full firmware backup using method below before proceeding
Backup full firmware(ROM) of any MediaTek device using MTK client| Oppo reno6 5G | MT6877
Hello Guys, Many times we encounter a situation where we need to do some software update, flash custom ROM, install stock ROM etc, so it is advisable to take full firmware/ROM backup of your device. If required then you can flash this backup to...
forum.xda-developers.com
Step1: Pre-requisite -Installing required drivers and setup
From link below download drivers and setup.
Install mediatek driver.
Install python (during installation of python please select "install for all user" from customization and tick add path to system variable)
install usbdk.
download extarct Mtk client tool.
go to folder where you extract mtk client
View attachment 5541629
open cmd here and run below command
cd mtkclient
pip3 install -r requirements.txt
In default setting it takes 2 hour to flash but after change it takes 13 min. If you want to increase flashing speed then open mtk_daxflash.py file from library folder, search "dsize = min(length, 0x200)" and replace it with "dsize = min(length, 0x2004)" , save and close the file.
You need to close command prompt in order to take effect of change.
Reference(https://github.com/bkerler/mtkclient/issues/271)
New Qcom Mtk Driver V3.0.5.1.rar | by TUSER HP for Generic Device/Other
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com
Download Python
The official home of the Python Programming Language
www.python.org
GitHub - bkerler/mtkclient: MTK reverse engineering and flash tool
MTK reverse engineering and flash tool. Contribute to bkerler/mtkclient development by creating an account on GitHub.
github.com
Releases · daynix/UsbDk
Usb Drivers Development Kit for Windows. Contribute to daynix/UsbDk development by creating an account on GitHub.
github.com
Step2: Download and extract the ColorOs 12 firmware
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CPH2251_11_C.27_ColorOS12_Android12_Latest.rar
drive.google.com
Step3: Flash the firmware
on cmd type below command to flash the firmware
python mtk wl "ROM location full path"
it will wait for devices.. Power off the phone, wait 10 sec then press vol up + vol down together and then plug the usb cable.
Once device detected , it will display devices information and start flashing
View attachment 5541639
View attachment 5541641
View attachment 5541645
While flashing it will dump the preloader, this file is very important so, please keep this file safely. this file may require in future.
View attachment 5541661
Step4: Boot the phone
Once flashing completed, press vol up + power button together for 30 sec. Wait for device to boot.
Step5: Flashing the preloader.bin (only if required)
In case, even after flashing completed successfully but some time device does not boot, only black screen, no charging sign either then don't panic, device has entered into emergency download mode, if you face the same then it's time to flash preloader.bin file. Follow below steps
1) download SP flash tool specific version v5.2148. (https://androidmtk.com/smart-phone-flash-tool)
2) download attached preloader.bin, scatter file and auth file from link below and place all these files at same folder.
MT6877_flashing_preloader.zip
drive.google.com
3) open sp flash tool, select download agent files from mtk folder as shown on image and load scater file and auth files respectively.
View attachment 5581171
4) In cmd run command "python mtk payload". Now press and hold vol+ vol- or all the buttons together, it should show payload sent successfully.
5) Now in sp flash tool click on Download button, it should flash the preloader successfully.
6) once preloader is flash successfully you can turn on the phone by pressing vol+ and power button together for 20 sec. If attached preloader does't flash then you can try flashing your device backup preloader.bin created/shown on step3.
so by this way we directly flashed ColorOS 12 on oppo reno6 5G.
Tips: If due to some reason flashing did not completed successfully then please press vol up and power button together for 30-40 sec to boot the phone (exit the brom mode).
Disclaimer: I have tested this method on my phone, it's 100% working but I will not responsible if damage any damage happens to your device while doing this. So do it at your own risk.

thanx nand for helping me in upgrading to coloros 12 again,this process worked successfully.

Thanks for the info.
My question is: can I use this method to remove phone branding using stock firmware image you pointed in your post?

macslui said:
Thanks for the info.
My question is: can I use this method to remove phone branding using stock firmware image you pointed in your post?
Click to expand...
Click to collapse
Hi, i didn't understand your question. Can you explain more.

Nand kumar said:
Hi, i didn't understand your question. Can you explain more.
Click to expand...
Click to collapse
Sorry. Try to better explain: I have a Vodafone branded reno 6 that accept any sim card. I only want to remove Vodafone branding (boot logo and custom app that are present only in branded phone).

Yes, you can try. I recommend you to take full firmware backup before doing this as explained in guide.

bonjour a tous quand j'écrit pip3 install -r requirements.txt j'ai une erreur :
ERROR: could not open requirements file :[Errno2] no such file or directory: requirements.txt
merci de m'aider

Please run this command from mtk folder

Nand kumar said:
Yes, you can try. I recommend you to take full firmware backup before doing this as explained in guide.
Click to expand...
Click to collapse
Hi Nand, I've done everything as you pointedout in this document and backup document.
Unfortunately I was able to flash the phone with success but now it do not turn it on anymore.
I've tried to every button combination but it remain off.
I also cannot enter brom mode anymore.
Have you some suggestion?
Thanks!

macslui said:
Hi Nand, I've done everything as you pointedout in this document and backup document.
Unfortunately I was able to flash the phone with success but now it do not turn it on anymore.
I've tried to every button combination but it remain off.
I also cannot enter brom mode anymore.
Have you some suggestion?
Thanks!
Click to expand...
Click to collapse
I was able to reenter brom mode. Now I'm reflashing again.

Hi all, everything ok now. I've flashed COS12 and now my phone is non more brand (vodafone) related.

Nand kumar said:
Please run this command from mtk folder
Click to expand...
Click to collapse
ok merci je ne savais pas comment ouvrir cmd a partir d'un fichier fonctionne très bien merci

macslui said:
Hi all, everything ok now. I've flashed COS12 and now my phone is non more brand (vodafone) related.
Click to expand...
Click to collapse
macslui said:
Glade to hear that you removed brand using thus method.
Click to expand...
Click to collapse

Unfortunatly COS12 in my opinion Is very laggy. I'm trying tio rollback to COS11 but, after flashing using your guide, the phone do not boot anymore. So I have to go back to 12. It's only my experience on COS12?

Hi, for many peoples, Color os12 was not laggy but have some bugs like battery draining etc.
For your device is not booting on color 11 then you have to flash preloader using Sp flash tool version v5.2148

Thanks Nand, allways ready to answer, thanks! Can please explain how to flash preloader with SP flash tool please? I have preloader from backup. Thanks again for your support.

Removed ...

macslui said:
Thanks Nand, allways ready to answer, thanks! Can please explain how to flash preloader with SP flash tool please? I have preloader from backup. Thanks again for your support.
Click to expand...
Click to collapse
Removed my contact details as I was getting to many message/calls on phone.

macslui said:
Hi Nand, I've done everything as you pointedout in this document and backup document.
Unfortunately I was able to flash the phone with success but now it do not turn it on anymore.
I've tried to every button combination but it remain off.
I also cannot enter brom mode anymore.
Have you some suggestion?
Thanks!
Click to expand...
Click to collapse
Same happen with me.. My phone is not bootibg up , no logo, no charging logo, not even single sign for alive please help me out help help

Cosmicsh said:
Same happen with me.. My phone is not bootibg up , no logo, no charging logo, not even single sign for alive please help me out help help
Click to expand...
Click to collapse
Removed my contact details as I was getting to many message/calls on phone.